Highly porous macro- and micro-cellular ceramics from a polysilazane precursor

Ceramics International

Volumn 35, Issue 8, 2009, Pages 3281-3290

  Vakifahmetoglu, C ^a   Menapace, I ^b   Hirsch, A ^b   Biasetto, L ^a,c   Hauser, R ^d   Riedel, R ^b   Colombo, P ^a,e  

^a UNIVERSITY OF PADOVA   (Italy)

^b DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

^c LABORATORI NAZIONALI DI LEGNARO   (Italy)

^d FRAUNHOFER INSTITUTE FOR MANUFACTURING TECHNOLOGY AND ADVANCED MATERIALS IFAM   (Germany)

^e PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

Compression strength; Foams; Polysilazane preceramic polymer; Silicon carbonitride

Indexed keywords

CELLULAR CERAMICS; CELLULAR FOAMS; CERAMIC COMPONENT; COMPRESSION STRENGTH; COST EFFECTIVE; INTERCONNECTED POROSITY; ONE-STEP PROCESS; OXYGEN CONTAMINATION; PHYSICAL BLOWING AGENTS; POLY(METHYLMETACRYLATE); POLYMER-DERIVED CERAMICS; POLYSILAZANE; POLYSILAZANE PRECERAMIC POLYMER; POLYSILAZANE PRECERAMIC POLYMERS; PORE ARCHITECTURE; PROCESSING METHOD; SILICON CARBONITRIDE;

BLOWING AGENTS; CARBON NITRIDE; COMPRESSIVE STRENGTH; FILLERS; HIGH TEMPERATURE APPLICATIONS; MICROCELLULAR RADIO SYSTEMS; OXYGEN; POLYMERS;

CERAMIC FOAMS;

EID: 70349199069     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2009.05.022     Document Type: Article

References (54)

1. Colombo P., Bernardo E., and Biasetto L. Novel microcellular ceramics from a silicone resin. Journal of the American Ceramic Society 87 1 (2004) 152-154
2. Colombo P., Hellmann J.R., and Shelleman D.L. Mechanical properties of silicon oxycarbide ceramic foams. Journal of the American Ceramic Society 84 10 (2001) 2245-2251
3. Colombo P. Engineering porosity in polymer-derived ceramics. Journal of the European Ceramic Society 28 7 (2008) 1389-1395
4. Zhuo R., Colombo P., Pantano C., and Vogler E.A. Silicon oxycarbide glasses for blood-contact applications. Acta Biomaterialia 1 5 (2005) 583-589
5. Biasetto L., Francis A., Palade P., Principi G., and Colombo P. Polymer-derived microcellular SiOC foams with magnetic functionality. Journal of Materials Science 43 12 (2008) 4119-4126
6. Colombo P., Gambaryan-Roisman T., Scheffler M., Buhler P., and Greil P. Conductive ceramic foams from preceramic polymers. Journal of the American Ceramic Society 84 10 (2001) 2265-2268
7. Colombo P., Hellmann J.R., and Shelleman D.L. Thermal shock behavior of silicon oxycarbide foams. Journal of the American Ceramic Society 85 9 (2002) 2306-2312
8. Colombo P. Conventional and novel processing methods for cellular ceramics. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 364 1838 (2006) 109-124
9. Colombo P., and Scheffler M. Highly porous components. In: Colombo P., Sorarù G.D., Riedel R., and Kleebe A. (Eds). Polymer-derived-ceramics (2009), DESTech Publications, Lancaster, PA
10. Colombo P., and Modesti M. Silicon oxycarbide ceramic foams from a preceramic polymer. Journal of the American Ceramic Society 82 3 (1999) 573-578
11. Colombo P., and Bernardo E. Macro- and micro-cellular porous ceramics from preceramic polymers. Composites Science and Technology 63 16 (2003) 2353-2359
12. Kim Y.-W., and Park C.B. Processing of microcellular preceramics using carbon dioxide. Composites Science and Technology 63 16 (2003) 2371-2377
13. Vakifahmetoglu C., and Colombo P. A Direct method for the fabrication of macro-porous SiOC ceramics from preceramic polymers. Advanced Engineering Materials 10 3 (2008) 256-259
14. Takahashi T., Münstedt H., Modesti M., and Colombo P. Oxidation resistant ceramic foam from a silicone preceramic polymer/polyurethane blend. Journal of the European Ceramic Society 21 16 (2001) 2821-2828
15. Schmidt H., Koch D., Grathwohl G., and Colombo P. Micro-/macroporous ceramics from preceramic precursors. Journal of the American Ceramic Society 84 10 (2001) 2252-2255
16. Costacurta S., Biasetto L., Pippel E., Woltersdorf J., and Colombo P. Hierarchical porosity components by infiltration of a ceramic foam. Journal of the American Ceramic Society 90 7 (2007) 2172-2177
17. Shibuya M., Takahashi T., and Koyama K. Microcellular ceramics by using silicone preceramic polymer and PMMA polymer sacrificial microbeads. Composites Science and Technology 67 1 (2007) 119-124
18. Kim Y.-W., Kim S.-H., Kim H.-D., and Park C.B. Processing of closed-cell silicon oxycarbide foams from a preceramic polymer. Journal of Materials Science 39 18 (2004) 5647-5652
19. Takahashi T., and Colombo P. SiOC ceramic foams through melt foaming of a methylsilicone preceramic polymer. Journal of Porous Materials 10 (2003) 113-121
20. Fujiu T., Messing G.L., and Huebner W. Processing and properties of cellular silica synthesized by foaming sol-gels. Journal of the American Ceramic Society 73 1 (1990) 85-90
21. Zeschky J., Höfner T., Arnold C., Weißmann R., Bahloul-Hourlier D., Scheffler M., and Greil P. Polysilsesquioxane derived ceramic foams with gradient porosity. Acta Materialia 53 4 (2005) 927-937
22. Rocha R., Moura E., Bressiani A., and Bressiani J. SiOC ceramic foams synthesized from electron beam irradiated methylsilicone resin. Journal of Materials Science 43 13 (2008) 4466-4474
23. Saha A., and Raj R. Crystallization maps for SiCO amorphous ceramics. Journal of the American Ceramic Society 90 (2007) 578-583
24. Seifert H.J., Peng J., Lukas H.L., and Aldinger F. Phase equilibria and thermal analysis of Si-C-N ceramics. Journal of Alloys and Compounds 320 2 (2001) 251-261
25. Friess M., Bill J., Golczewski J., Zimmermann A., Aldinger F., Riedel R., and Raj R. Crystallization of polymer-derived silicon carbonitride at 1873 K under nitrogen overpressure. Journal of the American Ceramic Society 85 10 (2002) 2587-2589
26. Kroke E., Li Y.-L., Konetschny C., Lecomte E., Fasel C., and Riedel R. Silazane derived ceramics and related materials. Materials Science and Engineering: R: Reports 26 4-6 (2000) 97-199
27. Saha A., Shah S.R., Raj R., and Russek S.E. Polymer-derived SiCN composites with magnetic properties. Journal of Materials Research 18 11 (2003) 2549-2551
28. Haluschka C., Engel C., and Riedel R. Silicon carbonitride ceramics derived from polysilazanes. Part II. Investigation of electrical properties. Journal of the European Ceramic Society 20 9 (2000) 1365-1374
29. Menapace I., Mera G., Riedel R., Erdem E., Eichel R.-A., Pauletti A., and Appleby G. Luminescence of heat-treated silicon-based polymers: promising materials for LED applications. Journal of Materials Science 43 17 (2008) 5790-5796
30. Du X.-W., Fu Y., Sun J., and Yao P. The evolution of microstructure and photoluminescence of SiCN films with annealing temperature. Journal of Applied Physics 99 9 (2006) 093503-093504
31. Thurn G., Canel J., Bill J., and Aldinger F. Compression creep behaviour of precursor-derived Si-C-N ceramics. Journal of the European Ceramic Society 19 13-14 (1999) 2317-2323
32. Sung I.-K., Christian M.M., Kim D.-P., and Kenis P.J.A. Tailored macroporous SiCN and SiC structures for high-temperature fuel reforming. Advanced Functional Materials 15 8 (2005) 1336-1342
33. Wang H., Zheng S.-Y., Li X.-D., and Kim D.-P. Preparation of three-dimensional ordered macroporous SiCN ceramic using sacrificing template method. Microporous and Mesoporous Materials 80 1-3 (2005) 357-362
34. Song I.-H., Kim Y.-J., Kim H.-D., and Kim D.-P. Colloidal crystal templating of two-dimensional ordered macroporous SiCN ceramics. Solid State Phenomena 135 (2008) 27-30
35. Yan J., Hong L.-Y., Wang A., and Kim D.-P. Facile synthesis of SiCN ceramic foam via self-sacrificial template method. Solid State Phenomena 124-126 (2007) 727-730
36. Jones B.H., and Lodge T.P. High-temperature nanoporous ceramic monolith prepared from a polymeric bicontinuous microemulsion template. Journal of the American Chemical Society 131 5 (2009) 1676-1677
37. ASTM D 3576, Standard test method for cell size of rigid cellular plastics, in: Annual Book of ASTM Standards, vol. 08.02, West Conshohocken, PA, 1997.
38. Technical Bulletin 1, KiON Ceraset polyureasilazane and KiON ceraset polysilazane 20 heat-curable resins of KiON Corporation, http://www.kioncorp.com/bulletins.html (Last accessed 03.09).
39. Li Y.-L., Kroke E., Riedelm R., Fasel C., Gervais C., and Babonneau F. Thermal cross-linking and pyrolytic conversion of poly(ureamethylvinyl)silazanes to silicon-based ceramics. Applied Organometallic Chemistry 15 10 (2001) 820-832
40. Schmidt H., Borchardt G., Müller A., and Bill J. Formation kinetics of crystalline Si3N4/SiC composites from amorphous Si-C-N ceramics. Journal of Non-Crystalline Solids 341 1-3 (2004) 133-140
41. Seyferth D., Strohmann C., Dando N.R., and Perrotta A.J. Poly(ureidosilazanes): preceramic polymeric precursors for silicon carbonitride and silicon nitride. Synthesis, characterization, and pyrolytic conversion to Si3N4/SiC ceramics. Chemistry of Materials 7 11 (1995) 2058-2066
42. z. Journal of the American Ceramic Society 89 12 (2006) 3706-3714
43. Gumann S., Nestle N., Liebau-Kunzmann V., and Riedel R. Investigations of Li-containing SiCN(O) ceramics via 7Li MAS NMR. Solid State Nuclear Magnetic Resonance 31 2 (2007) 82-90
44. Gibson L.J., and Ashby M.F. Cellular Solids, Structure and Properties (1999), Cambridge University Press, UK
45. Konetschny C., Galusek D., Reschke S., Fasel C., and Riedel R. Dense silicon carbonitride ceramics by pyrolysis of cross-linked and warm pressed polysilazane powders. Journal of the European Ceramic Society 19 16 (1999) 2789-2796
46. Quinn S. Chemical blowing agents: providing production, economic and physical improvements to a wide range of polymers. Plastics, Additives and Compounding 3 (2001) 16-21
47. Lin A.S.P., Barrows T.H., Cartmell S.H., and Guldberg R.E. Microarchitectural and mechanical characterization of oriented porous polymer scaffolds. Biomaterials 24 3 (2003) 481-489
48. Prakash A.S., Swam W.A., and Strachan A.N. The thermal decomposition of azodicarbonamide (1,1-azobisformamide). J. Chem. Soc., Perkin Trans. 2 (1975) 46-50
49. Robledo-Ortiz J.R., Zepeda C., Gomez C., Rodrigue D., and González-Núñez R. Non-isothermal decomposition kinetics of azodicarbonamide in high density polyethylene using a capillary rheometer. Polymer Testing 27 6 (2008) 730-735
50. Rychlá L., Rychlý J., Svoboda J., and Šimonik J. DSC study of the decomposition of azodicarbonamide in different media. Journal of Thermal Analysis and Calorimetry 29 1 (1984) 77-85
51. Huang Q., Klotzer R., Seibig B., and Paul D. Extrusion of microcellular polysulfone using chemical blowing agents. Journal of Applied Polymer Science 69 9 (1998) 1753-1760
52. Lücke J., Hacker J., Suttor D., and Ziegler G. Synthesis and characterization of silazane-based polymers as precursors for ceramic matrix composites. Applied Organometallic Chemistry 11 2 (1997) 181-194
53. Colombo P., and Hellmann J. Ceramic foams from preceramic polymers. Materials Research Innovations 6 5 (2002) 260-272
54. Qin X., Thompson M.R., Hrymak A.N., and Torres A. Rheology studies of polyethylene/chemical blowing agent solutions within an injection molding machine. Polymer Engineering & Science 45 8 (2005) 1108-1118