-
1
-
-
84883259204
-
-
US Patent Number 5,468,174
-
D.P. Bachand, G.P. McNamara, Recyclable abrasive blasting system, United States Patent and Trademark Office, US Patent Number 5,468,174 (1992).
-
(1992)
Recyclable Abrasive Blasting System, United States Patent and Trademark Office
-
-
Bachand, D.P.1
McNamara, G.P.2
-
2
-
-
2942544475
-
Erosion behaviour and pattern transfer accuracy of protecting masks for micro-abrasive blasting
-
M. Achtsnick, J. Drabbe, A.M. Hoogstrate, and B. Karpuschewski Erosion behaviour and pattern transfer accuracy of protecting masks for micro-abrasive blasting J. Mater. Process. Technol. 149 1-3 2004 43 49
-
(2004)
J. Mater. Process. Technol.
, vol.149
, Issue.13
, pp. 43-49
-
-
Achtsnick, M.1
Drabbe, J.2
Hoogstrate, A.M.3
Karpuschewski, B.4
-
3
-
-
23044506216
-
Modelling and evaluation of the micro abrasive blasting process
-
M. Achtsnick, P.F. Geelhoed, A.M. Hoogstrate, and B. Karpuschewski Modelling and evaluation of the micro abrasive blasting process Wear 259 1-6 2005 84 94
-
(2005)
Wear
, vol.259
, Issue.16
, pp. 84-94
-
-
Achtsnick, M.1
Geelhoed, P.F.2
Hoogstrate, A.M.3
Karpuschewski, B.4
-
4
-
-
79955018484
-
Strategies for optimal use of fluids in grinding
-
R. Alberdi, J.A. Sanchez, I. Pombo, N. Ortega, B. Izquierdo, S. Plaza, and D. Barrenetxea Strategies for optimal use of fluids in grinding Int. J. Mach. Tools Manuf. 51 6 2011 491 499
-
(2011)
Int. J. Mach. Tools Manuf.
, vol.51
, Issue.6
, pp. 491-499
-
-
Alberdi, R.1
Sanchez, J.A.2
Pombo, I.3
Ortega, N.4
Izquierdo, B.5
Plaza, S.6
Barrenetxea, D.7
-
5
-
-
84883251512
-
Biologisch Honen, NC-Fertigung: Werkzeugmaschinen, Werkzeuge
-
Anonym Biologisch Honen, NC-Fertigung: Werkzeugmaschinen, Werkzeuge Fertigungsprozesse 3 2002 188 191
-
(2002)
Fertigungsprozesse
, vol.3
, pp. 188-191
-
-
-
8
-
-
43649101418
-
High-performance dry grinding using a grinding wheel with a defined grain pattern
-
J.C. Aurich, P. Herzenstiel, H. Sudermann, and T. Magg High-performance dry grinding using a grinding wheel with a defined grain pattern CIRP Ann. Manuf. Technol. 57 1 2008 357 362
-
(2008)
CIRP Ann. Manuf. Technol.
, vol.57
, Issue.1
, pp. 357-362
-
-
Aurich, J.C.1
Herzenstiel, P.2
Sudermann, H.3
Magg, T.4
-
9
-
-
84883244632
-
Grinding wheel
-
L. Laperrière, G. Reinhart, Springer-Verlag Berlin, Heidelberg ()
-
J.C. Aurich, and B. Kirsch Grinding wheel L. Laperrière, G. Reinhart, CIRP Encyclopedia of Production Engineering: Springer Reference 2013 Springer-Verlag Berlin, Heidelberg 1 (www.springerreference.com)
-
(2013)
CIRP Encyclopedia of Production Engineering: Springer Reference
, pp. 1
-
-
Aurich, J.C.1
Kirsch, B.2
-
10
-
-
84883244632
-
Grinding
-
L. Laperrière, G. Reinhart, Springer-Verlag Berlin, Heidelberg ()
-
J.C. Aurich, and C. Effgen Grinding L. Laperrière, G. Reinhart, CIRP Encyclopedia of Production Engineering: Springer Reference 2013 Springer-Verlag Berlin, Heidelberg 1 (www.springerreference.com)
-
(2013)
CIRP Encyclopedia of Production Engineering: Springer Reference
, pp. 1
-
-
Aurich, J.C.1
Effgen, C.2
-
11
-
-
67349261056
-
Factors affecting wheel collapse in grinding
-
J. Badger Factors affecting wheel collapse in grinding CIRP Ann. Manuf. Technol. 58 1 2009 307 310
-
(2009)
CIRP Ann. Manuf. Technol.
, vol.58
, Issue.1
, pp. 307-310
-
-
Badger, J.1
-
14
-
-
77957270883
-
A study of plane surface grinding under minimum quantity lubrication (MQL) conditions
-
L. Barczak, A. Batako, and M. Morgan A study of plane surface grinding under minimum quantity lubrication (MQL) conditions Int. J. Mach. Tools Manuf. 50 11 2010 977 985
-
(2010)
Int. J. Mach. Tools Manuf.
, vol.50
, Issue.11
, pp. 977-985
-
-
Barczak, L.1
Batako, A.2
Morgan, M.3
-
16
-
-
33748964469
-
Correlation between the surface quality and the abrasive grains wear in optical glass lapping
-
N. Belkhir, D. Bouzid, and V. Herold Correlation between the surface quality and the abrasive grains wear in optical glass lapping Tribol. Int. 40 3 2007 498 502
-
(2007)
Tribol. Int.
, vol.40
, Issue.3
, pp. 498-502
-
-
Belkhir, N.1
Bouzid, D.2
Herold, V.3
-
17
-
-
67549106596
-
Surface behavior during abrasive grain action in the glass lapping process
-
N. Belkhir, D. Bouzid, and V. Herold Surface behavior during abrasive grain action in the glass lapping process Appl. Surf. Sci. 255 18 2009 7951 7958
-
(2009)
Appl. Surf. Sci.
, vol.255
, Issue.18
, pp. 7951-7958
-
-
Belkhir, N.1
Bouzid, D.2
Herold, V.3
-
18
-
-
77955313985
-
Effects of mixed abrasive grits in slurries on free abrasive machining (FAM) processes
-
S. Bhagavat, J.C. Liberato, C. Chung, and I. Kao Effects of mixed abrasive grits in slurries on free abrasive machining (FAM) processes Int. J. Mach. Tools Manuf. 50 9 2010 843 847
-
(2010)
Int. J. Mach. Tools Manuf.
, vol.50
, Issue.9
, pp. 843-847
-
-
Bhagavat, S.1
Liberato, J.C.2
Chung, C.3
Kao, I.4
-
19
-
-
52149108286
-
Damage-free polishing of monocrystalline silicon wafers without chemical additives
-
A.Q. Biddut, L.C. Zhang, Y.M. Ali, and Z. Liu Damage-free polishing of monocrystalline silicon wafers without chemical additives Scripta Mater. 59 11 2008 1178 1181
-
(2008)
Scripta Mater.
, vol.59
, Issue.11
, pp. 1178-1181
-
-
Biddut, A.Q.1
Zhang, L.C.2
Ali, Y.M.3
Liu, Z.4
-
20
-
-
84861625993
-
Abrasive points for drill grinding of carbon fibre reinforced thermoset
-
D. Biermann, and M. Feldhoff Abrasive points for drill grinding of carbon fibre reinforced thermoset CIRP Ann. Manuf. Technol. 61 1 2012 299 302
-
(2012)
CIRP Ann. Manuf. Technol.
, vol.61
, Issue.1
, pp. 299-302
-
-
Biermann, D.1
Feldhoff, M.2
-
21
-
-
77952092046
-
Development of a honing process for the combination machining of hardened axisymmetric parts
-
D. Biermann, K. Marschalkowski, and K.-U. Paffrath Development of a honing process for the combination machining of hardened axisymmetric parts Prod. Eng. Res. Dev. 4 2-3 2010 147 155
-
(2010)
Prod. Eng. Res. Dev.
, vol.4
, Issue.23
, pp. 147-155
-
-
Biermann, D.1
Marschalkowski, K.2
Paffrath, K.-U.3
-
22
-
-
0028756970
-
Possibilities for the disposal of grinding swarf
-
E. Brinksmeier, and J. Eckebrecht Possibilities for the disposal of grinding swarf CIRP Ann. Manuf. Technol. 43 2 1994 593 597
-
(1994)
CIRP Ann. Manuf. Technol.
, vol.43
, Issue.2
, pp. 593-597
-
-
Brinksmeier, E.1
Eckebrecht, J.2
-
23
-
-
0033329664
-
Friction, cooling and lubrication in grinding
-
E. Brinksmeier, C. Heinzel, and M. Wittmann Friction, cooling and lubrication in grinding CIRP Ann. Manuf. Technol. 48 2 1999 581 598
-
(1999)
CIRP Ann. Manuf. Technol.
, vol.48
, Issue.2
, pp. 581-598
-
-
Brinksmeier, E.1
Heinzel, C.2
Wittmann, M.3
-
25
-
-
0032691012
-
Grind-hardening: A comprehensive view
-
T. Brockhoff Grind-hardening: a comprehensive view CIRP Ann. Manuf. Technol., 48 1 1999 255 260
-
(1999)
CIRP Ann. Manuf. Technol.
, vol.48
, Issue.1
, pp. 255-260
-
-
Brockhoff, T.1
-
26
-
-
79751531095
-
Roughness variability in the honing process of steel cylinders with CBN metal bonded tools
-
I. Buj-Corral, and J. Vivancos-Calvet Roughness variability in the honing process of steel cylinders with CBN metal bonded tools Precis. Eng. 35 2 2011 289 293
-
(2011)
Precis. Eng.
, vol.35
, Issue.2
, pp. 289-293
-
-
Buj-Corral, I.1
Vivancos-Calvet, J.2
-
28
-
-
33749444604
-
Recycling oil and steel from grinding swarf
-
J. Chang, J. Lin, J. Huang, and Y. Chang Recycling oil and steel from grinding swarf Resour. Conserv. Recycl. 49 2 2006 191 201
-
(2006)
Resour. Conserv. Recycl.
, vol.49
, Issue.2
, pp. 191-201
-
-
Chang, J.1
Lin, J.2
Huang, J.3
Chang, Y.4
-
29
-
-
79960834319
-
Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing
-
C.F. Cheung, L.B. Kong, L.T. Ho, and S. To Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing Precis. Eng. 35 4 2011 574 590
-
(2011)
Precis. Eng.
, vol.35
, Issue.4
, pp. 574-590
-
-
Cheung, C.F.1
Kong, L.B.2
Ho, L.T.3
To, S.4
-
30
-
-
33750945618
-
A novel method of composite electroplating on lap in lapping process
-
Y.-C. Chiou, R.-T. Lee, and C.-L. Yau A novel method of composite electroplating on lap in lapping process Int. J. Mach. Tools Manuf. 47 2 2007 361 367
-
(2007)
Int. J. Mach. Tools Manuf.
, vol.47
, Issue.2
, pp. 361-367
-
-
Chiou, Y.-C.1
Lee, R.-T.2
Yau, C.-L.3
-
31
-
-
33744513102
-
An investigation of lapping characteristics for improving the form error of an aspheric lens
-
H.-C. Chuang, and P.-L. Tso An investigation of lapping characteristics for improving the form error of an aspheric lens J. Mater. Process. Technol. 176 1-3 2006 183 190
-
(2006)
J. Mater. Process. Technol.
, vol.176
, Issue.13
, pp. 183-190
-
-
Chuang, H.-C.1
Tso, P.-L.2
-
33
-
-
33845266699
-
Erosion wear behaviours of SiC/(W,Ti)C laminated ceramic nozzles in dry sand blasting processes
-
J. Deng, L. Liu, and M. Ding Erosion wear behaviours of SiC/(W,Ti)C laminated ceramic nozzles in dry sand blasting processes Mater. Sci. Eng. A 444 1-2 2007 120 129
-
(2007)
Mater. Sci. Eng. A
, vol.444
, Issue.12
, pp. 120-129
-
-
Deng, J.1
Liu, L.2
Ding, M.3
-
34
-
-
28944442558
-
Wear of ceramic nozzles by dry sand blasting
-
J. Deng, X. Zhang, P. Niu, L. Liu, and J. Wang Wear of ceramic nozzles by dry sand blasting Tribol. Int. 39 3 2006 274 280
-
(2006)
Tribol. Int.
, vol.39
, Issue.3
, pp. 274-280
-
-
Deng, J.1
Zhang, X.2
Niu, P.3
Liu, L.4
Wang, J.5
-
35
-
-
33745179592
-
Dressing monitoring by acoustic emission
-
B. Denkena, J. Jacobsen, and N. Kramer Dressing monitoring by acoustic emission Key Eng. Mater. 291-292 2005 195 200
-
(2005)
Key Eng. Mater.
, vol.291-292
, pp. 195-200
-
-
Denkena, B.1
Jacobsen, J.2
Kramer, N.3
-
36
-
-
80052106969
-
Machine tool design and operation strategies for green manufacturing
-
N. Diaz, S. Choi, M. Helu, Y. Chen, S. Jayanathan, Y. Yasui, D. Kong, S. Pavanaskar, and D. Dornfeld Machine tool design and operation strategies for green manufacturing Proceedings of the 4th CIRP International Conference on High Performance Cutting, vol. 1 2010 271 276
-
(2010)
Proceedings of the 4th CIRP International Conference on High Performance Cutting, Vol. 1
, pp. 271-276
-
-
Diaz, N.1
Choi, S.2
Helu, M.3
Chen, Y.4
Jayanathan, S.5
Yasui, Y.6
Kong, D.7
Pavanaskar, S.8
Dornfeld, D.9
-
37
-
-
71849087389
-
Quantification of the cold worked material inside the deep honing grooves on cylinder liner surfaces and its effect on wear
-
Z. Dimkovski, C. Anderberg, B.-G. Rosén, R. Ohlsson, and T.R. Thomas Quantification of the cold worked material inside the deep honing grooves on cylinder liner surfaces and its effect on wear Wear 267 12 2009 2235 2242
-
(2009)
Wear
, vol.267
, Issue.12
, pp. 2235-2242
-
-
Dimkovski, Z.1
Anderberg, C.2
Rosén, B.-G.3
Ohlsson, R.4
Thomas, T.R.5
-
39
-
-
84861629310
-
Towards energy and resource efficient manufacturing: A processes and systems approach
-
J. Duflou, J. Sutherland, D. Dornfeld, C. Herrmann, J. Jeswiet, S. Kara, M. Hauschild, and K. Kellens Towards energy and resource efficient manufacturing: a processes and systems approach CIRP Ann. Manuf. Technol. 61 2 2012 587 609
-
(2012)
CIRP Ann. Manuf. Technol.
, vol.61
, Issue.2
, pp. 587-609
-
-
Duflou, J.1
Sutherland, J.2
Dornfeld, D.3
Herrmann, C.4
Jeswiet, J.5
Kara, S.6
Hauschild, M.7
Kellens, K.8
-
42
-
-
0003423355
-
Cannibals with forks
-
New Society Publishers Gabriola Island, BC/Stony Creek, CT
-
J. Elkington Cannibals with forks The Triple Bottom Line of 21st Century Business 1998 New Society Publishers Gabriola Island, BC/Stony Creek, CT
-
(1998)
The Triple Bottom Line of 21st Century Business
-
-
Elkington, J.1
-
43
-
-
79957644230
-
A newly developed polishing pad for achieving high surface flatness without edge roll off
-
T. Enomoto, U. Satake, T. Miyake, and N. Tabata A newly developed polishing pad for achieving high surface flatness without edge roll off CIRP Ann. Manuf. Technol. 60 1 2011 371 374
-
(2011)
CIRP Ann. Manuf. Technol.
, vol.60
, Issue.1
, pp. 371-374
-
-
Enomoto, T.1
Satake, U.2
Miyake, T.3
Tabata, N.4
-
45
-
-
61549107603
-
Temperature as sensitive monitor for efficiency of work in abrasive flow machining
-
L. Fang, J. Zhao, K. Sun, D. Zheng, and D. Ma Temperature as sensitive monitor for efficiency of work in abrasive flow machining Wear 266 7-8 2009 678 687
-
(2009)
Wear
, vol.266
, Issue.78
, pp. 678-687
-
-
Fang, L.1
Zhao, J.2
Sun, K.3
Zheng, D.4
Ma, D.5
-
46
-
-
33646495399
-
A study on wear mechanism and wear reduction strategies in grinding wheels used for ELID grinding
-
K. Fathima, A. Senthil Kumar, M. Rahman, and H. Lim A study on wear mechanism and wear reduction strategies in grinding wheels used for ELID grinding Wear 254 12 2003 1247 1255
-
(2003)
Wear
, vol.254
, Issue.12
, pp. 1247-1255
-
-
Fathima, K.1
Senthil Kumar, A.2
Rahman, M.3
Lim, H.4
-
47
-
-
61549103466
-
The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V
-
G. Fowler, I.R. Pashby, and P.H. Shipway The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V Wear 266 7-8 2009 613 620
-
(2009)
Wear
, vol.266
, Issue.78
, pp. 613-620
-
-
Fowler, G.1
Pashby, I.R.2
Shipway, P.H.3
-
48
-
-
84883226840
-
Optimization of the polishing procedure using a robot assisted polishing equipment
-
Halmstad University
-
M. Gagnolet Optimization of the polishing procedure using a robot assisted polishing equipment Project Report 2008 Halmstad University
-
(2008)
Project Report
-
-
Gagnolet, M.1
-
50
-
-
0002916255
-
Analysis of hydrodynamic forces in grinding
-
M. Ganesan, C. Guo, A. Ronen, and S. Malkin Analysis of hydrodynamic forces in grinding Trans. N. Am. Manuf. Res. Inst. Soc. Manuf. Eng. XXIV 24 1996 105 110
-
(1996)
Trans. N. Am. Manuf. Res. Inst. Soc. Manuf. Eng.
, vol.XXIV
, Issue.24
, pp. 105-110
-
-
Ganesan, M.1
Guo, C.2
Ronen, A.3
Malkin, S.4
-
51
-
-
0141458174
-
Loose abrasive blasting as an alternative to slurry polishing of optical fibre end faces
-
Y. Gharbia, and J. Katupitiya Loose abrasive blasting as an alternative to slurry polishing of optical fibre end faces Int. J. Mach. Tools Manuf. 43 14 2003 1413 1418
-
(2003)
Int. J. Mach. Tools Manuf.
, vol.43
, Issue.14
, pp. 1413-1418
-
-
Gharbia, Y.1
Katupitiya, J.2
-
52
-
-
44649091154
-
Modelling of specific energy requirement during high-efficiency deep grinding
-
S. Ghosh, A. Chattopadhyay, and S. Paul Modelling of specific energy requirement during high-efficiency deep grinding Int. J. Mach. Tools Manuf. 48 11 2008 1242 1253
-
(2008)
Int. J. Mach. Tools Manuf.
, vol.48
, Issue.11
, pp. 1242-1253
-
-
Ghosh, S.1
Chattopadhyay, A.2
Paul, S.3
-
54
-
-
33344465990
-
Non-conservative oscillations of a tool for deep hole honing
-
A.M. Gouskov, S.A. Voronov, E.A. Butcher, and S.C. Sinha Non-conservative oscillations of a tool for deep hole honing Commun. Nonlin. Sci. Numer. Simul. 11 6 2006 685 708
-
(2006)
Commun. Nonlin. Sci. Numer. Simul.
, vol.11
, Issue.6
, pp. 685-708
-
-
Gouskov, A.M.1
Voronov, S.A.2
Butcher, E.A.3
Sinha, S.C.4
-
55
-
-
77955510788
-
Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions
-
W. Grabon, P. Pawlus, and J. Sep Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions Tribol. Int. 43 10 2010 1882 1892
-
(2010)
Tribol. Int.
, vol.43
, Issue.10
, pp. 1882-1892
-
-
Grabon, W.1
Pawlus, P.2
Sep, J.3
-
56
-
-
0035822756
-
A review of the influence of grinding conditions on resulting residual stresses after induction surface hardening and grinding
-
J. Grum A review of the influence of grinding conditions on resulting residual stresses after induction surface hardening and grinding J. Mater. Process. Technol. 114 3 2001 212 226
-
(2001)
J. Mater. Process. Technol.
, vol.114
, Issue.3
, pp. 212-226
-
-
Grum, J.1
-
57
-
-
79251614354
-
An experimental and numerical study of water jet cleaning process
-
A. Guha, M.R. Barron, and R. Balachandar An experimental and numerical study of water jet cleaning process J. Mater. Process. Technol. 211 4 2011 610 618
-
(2011)
J. Mater. Process. Technol.
, vol.211
, Issue.4
, pp. 610-618
-
-
Guha, A.1
Barron, M.R.2
Balachandar, R.3
-
59
-
-
0029252033
-
Analysis of energy partition in grinding
-
C. Guo, and S. Malkin Analysis of energy partition in grinding J. Mater. Sci. Eng. 117 1 1995 55 61
-
(1995)
J. Mater. Sci. Eng.
, vol.117
, Issue.1
, pp. 55-61
-
-
Guo, C.1
Malkin, S.2
-
60
-
-
0028595335
-
Abrasive water jet cutting - Methods to calculate cutting performance and cutting efficiency
-
N.S. Guo, H. Louis, G. Meier, and J. Ohlsen Abrasive water jet cutting - methods to calculate cutting performance and cutting efficiency Proceedings of the International Conference on Geomechanics, vol. 93 1994 291 299
-
(1994)
Proceedings of the International Conference on Geomechanics, Vol. 93
, pp. 291-299
-
-
Guo, N.S.1
Louis, H.2
Meier, G.3
Ohlsen, J.4
-
61
-
-
4243118645
-
Environmentally benign manufacturing: Observations from Japan, Europe and the United States
-
T.G. Gutowski, C. Murphy, D. Allen, D. Bauer, B. Bras, T. Piwonka, P. Sheng, J. Sutherland, D. Thurston, and E. Wolff Environmentally benign manufacturing: observations from Japan, Europe and the United States J. Clean. Prod. 13 2005 1 17
-
(2005)
J. Clean. Prod.
, vol.13
, pp. 1-17
-
-
Gutowski, T.G.1
Murphy, C.2
Allen, D.3
Bauer, D.4
Bras, B.5
Piwonka, T.6
Sheng, P.7
Sutherland, J.8
Thurston, D.9
Wolff, E.10
-
64
-
-
84883248001
-
Energy consumption in ultra larger ring finishing
-
Timken
-
F. Hashimoto Energy consumption in ultra larger ring finishing Internal Report 2012 Timken
-
(2012)
Internal Report
-
-
Hashimoto, F.1
-
66
-
-
84883241695
-
Best existing practice for characterization modelling
-
M. Hauschild, M. Goedkoop, J. Guinée, R. Heijungs, M. Huijbregts, O. Jolliet, M. Margni, A.de Schryver, S. Humbert, A. Laurent, S. Sala, and R. Pant Best existing practice for characterization modelling Life Cycle Impact Assessment 2012
-
(2012)
Life Cycle Impact Assessment
-
-
Hauschild, M.1
Goedkoop, M.2
Guinée, J.3
Heijungs, R.4
Huijbregts, M.5
Jolliet, O.6
Margni, M.7
Schryver, A.D.8
Humbert, S.9
Laurent, A.10
Sala, S.11
Pant, R.12
-
67
-
-
32044456224
-
From life cycle assessment to sustainable production: Status and perspectives
-
M. Hauschild, J. Jeswiet, and L. Alting From life cycle assessment to sustainable production: status and perspectives CIRP Ann. Manuf. Technol. 54 2 2005 1 21
-
(2005)
CIRP Ann. Manuf. Technol.
, vol.54
, Issue.2
, pp. 1-21
-
-
Hauschild, M.1
Jeswiet, J.2
Alting, L.3
-
68
-
-
43649094261
-
Assessing social impacts in a life cycle perspective - Lessons learned
-
M.Z. Hauschild, L.C. Dreyer, and A. Jørgensen Assessing social impacts in a life cycle perspective - lessons learned CIRP Ann. Manuf. Technol. 57 1 2008 21 24
-
(2008)
CIRP Ann. Manuf. Technol.
, vol.57
, Issue.1
, pp. 21-24
-
-
Hauschild, M.Z.1
Dreyer, L.C.2
Jørgensen, A.3
-
69
-
-
30344483612
-
Surface roughness and gloss of dental materials as a function of force and polishing time in vitro
-
S.D. Heintze, M. Forjanic, and V. Rousson Surface roughness and gloss of dental materials as a function of force and polishing time in vitro Dent. Mater. 22 2 2006 146 165
-
(2006)
Dent. Mater.
, vol.22
, Issue.2
, pp. 146-165
-
-
Heintze, S.D.1
Forjanic, M.2
Rousson, V.3
-
70
-
-
84861628061
-
Prevention of wheel clogging in creep feed grinding by efficient tool cleaning
-
C. Heinzel, and G. Antsupov Prevention of wheel clogging in creep feed grinding by efficient tool cleaning CIRP Ann. Manuf. Technol. 61 1 2012 323 326
-
(2012)
CIRP Ann. Manuf. Technol.
, vol.61
, Issue.1
, pp. 323-326
-
-
Heinzel, C.1
Antsupov, G.2
-
71
-
-
67349119274
-
Engineered wheels for grinding of optical glass
-
C. Heinzel, and K. Rickens Engineered wheels for grinding of optical glass CIRP Ann. Manuf. Technol. 58 1 2009 315 318
-
(2009)
CIRP Ann. Manuf. Technol.
, vol.58
, Issue.1
, pp. 315-318
-
-
Heinzel, C.1
Rickens, K.2
-
72
-
-
0034962760
-
Process analysis for the evaluation of the surface formation and removal rate in lapping
-
U. Heisel, and J. Avroutine Process analysis for the evaluation of the surface formation and removal rate in lapping CIRP Ann. Manuf. Technol. 50 1 2001 229 232
-
(2001)
CIRP Ann. Manuf. Technol.
, vol.50
, Issue.1
, pp. 229-232
-
-
Heisel, U.1
Avroutine, J.2
-
73
-
-
79957638114
-
Evaluating the relationship between use phase environmental impacts and manufacturing process precision
-
M. Helu, A. Vijayaraghavan, and D. Dornfeld Evaluating the relationship between use phase environmental impacts and manufacturing process precision CIRP Ann. Manuf. Technol. 60 1 2011 49 52
-
(2011)
CIRP Ann. Manuf. Technol.
, vol.60
, Issue.1
, pp. 49-52
-
-
Helu, M.1
Vijayaraghavan, A.2
Dornfeld, D.3
-
74
-
-
67651152558
-
Process chain simulation to foster energy efficiency in manufacturing
-
C. Herrmann, and S. Thiede Process chain simulation to foster energy efficiency in manufacturing CIRP J. Manuf. Sci. Technol. 1 4 2009 221 229
-
(2009)
CIRP J. Manuf. Sci. Technol.
, vol.1
, Issue.4
, pp. 221-229
-
-
Herrmann, C.1
Thiede, S.2
-
75
-
-
0005184655
-
Auf dem Weg zum Trockenschleifen
-
H.-W. Hoffmeister, and A. Langemeyer Auf dem Weg zum Trockenschleifen VDI-Z 140 5 1998 43 46
-
(1998)
VDI-Z
, vol.140
, Issue.5
, pp. 43-46
-
-
Hoffmeister, H.-W.1
Langemeyer, A.2
-
76
-
-
84883260559
-
Flachschleifen metallischer Werkstoffe unter Verwendung von flüssigem Stickstoff zur Kühlung, Jahrbuch Schleifen
-
H.-W. Hoffmeister, and K. Maiz Flachschleifen metallischer Werkstoffe unter Verwendung von flüssigem Stickstoff zur Kühlung, Jahrbuch Schleifen Honen, Läppen und Polieren vol. 63 2007 119 135
-
(2007)
Honen, Läppen und Polieren
, vol.63 VOL.
, pp. 119-135
-
-
Hoffmeister, H.-W.1
Maiz, K.2
-
79
-
-
0026369222
-
Environmental aspects of grinding fluids
-
T.D. Howes, H.K. Tönshoff, W. Heuer, and T. Howes Environmental aspects of grinding fluids CIRP Ann. Manuf. Technol. 40/ 2 1991 623 630
-
(1991)
CIRP Ann. Manuf. Technol.
, vol.40
, Issue.2
, pp. 623-630
-
-
Howes, T.D.1
Tönshoff, H.K.2
Heuer, W.3
Howes, T.4
-
80
-
-
29244470560
-
A method for reducing tool wear in a polishing process
-
T.-C. Hung, and Y.-T. Su A method for reducing tool wear in a polishing process Int. J. Mach. Tools Manuf. 46 3-4 2006 413 423
-
(2006)
Int. J. Mach. Tools Manuf.
, vol.46
, Issue.34
, pp. 413-423
-
-
Hung, T.-C.1
Su, Y.-T.2
-
83
-
-
0035283620
-
High-speed grinding with CBN grinding wheels - Applications and future technology
-
M. Jackson, C. Davis, M. Hitchiner, and B. Mills High-speed grinding with CBN grinding wheels - applications and future technology J. Mater. Process. Technol. 110 1 2001 78 88
-
(2001)
J. Mater. Process. Technol.
, vol.110
, Issue.1
, pp. 78-88
-
-
Jackson, M.1
Davis, C.2
Hitchiner, M.3
Mills, B.4
-
84
-
-
80051673337
-
Surface integrity in material removal processes: Recent advances
-
I.S. Jawahir, E. Brinksmeier, R. M'Saoubi, D.K. Aspinwall, J.C. Outeiro, D. Meyer, D. Umbrello, and A.D. Jayal Surface integrity in material removal processes: recent advances CIRP Ann. Manuf. Technol. 60 2 2011 603 626
-
(2011)
CIRP Ann. Manuf. Technol.
, vol.60
, Issue.2
, pp. 603-626
-
-
Jawahir, I.S.1
Brinksmeier, E.2
M'Saoubi, R.3
Aspinwall, D.K.4
Outeiro, J.C.5
Meyer, D.6
Umbrello, D.7
Jayal, A.D.8
-
85
-
-
0347354866
-
High-efficiency fixed abrasive polishing method for quartz crystal blanks
-
H.-W. Jeong, T. Aoki, and T. Hatsuzawa High-efficiency fixed abrasive polishing method for quartz crystal blanks Int. J. Mach. Tools Manuf. 44 2-3 2004 167 173
-
(2004)
Int. J. Mach. Tools Manuf.
, vol.44
, Issue.23
, pp. 167-173
-
-
Jeong, H.-W.1
Aoki, T.2
Hatsuzawa, T.3
-
86
-
-
0037698098
-
Investigation of the heat partitioning in high efficiency deep grinding
-
T. Jin, and D.J. Stephenson Investigation of the heat partitioning in high efficiency deep grinding Int. J. Mach. Tools Manuf. 43 11 2003 1129 1134
-
(2003)
Int. J. Mach. Tools Manuf.
, vol.43
, Issue.11
, pp. 1129-1134
-
-
Jin, T.1
Stephenson, D.J.2
-
87
-
-
0015159818
-
An investigation of abrasive blasting
-
J. Jones, and J. Gardos An investigation of abrasive blasting J. Am. Soc. Lubric. Eng. 6 1971 393 399
-
(1971)
J. Am. Soc. Lubric. Eng.
, vol.6
, pp. 393-399
-
-
Jones, J.1
Gardos, J.2
-
88
-
-
84861631242
-
Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding
-
P. Kalita, A.P. Malshe, and K.P. Rajurkar Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding CIRP Ann. Manuf. Technol. 61 1 2012 327 330
-
(2012)
CIRP Ann. Manuf. Technol.
, vol.61
, Issue.1
, pp. 327-330
-
-
Kalita, P.1
Malshe, A.P.2
Rajurkar, K.P.3
-
89
-
-
10444261194
-
Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements
-
J. Kang, and M. Hadfield Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements Wear 258 1-4 2005 2 12
-
(2005)
Wear
, vol.258
, Issue.14
, pp. 2-12
-
-
Kang, J.1
Hadfield, M.2
-
90
-
-
6744222290
-
Strategien zur Reduzierung des Kühlschmierstoffverbrauchs beim Schleifen, Jahrbuch Schleifen
-
B. Karpuschewski, G. Brunner, and Y. Falkenberg Strategien zur Reduzierung des Kühlschmierstoffverbrauchs beim Schleifen, Jahrbuch Schleifen Honen, Läppen und Polieren vol. 58 1997 146 159
-
(1997)
Honen, Läppen und Polieren
, vol.58 VOL.
, pp. 146-159
-
-
Karpuschewski, B.1
Brunner, G.2
Falkenberg, Y.3
-
94
-
-
84855257842
-
Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI) - CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description
-
K. Kellens, W. Dewulf, M. Overcash, M.Z. Hauschild, and J. Duflou Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI) - CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: methodology description Int. J. Life Cycle Assess. 17 1 2012 69 78
-
(2012)
Int. J. Life Cycle Assess.
, vol.17
, Issue.1
, pp. 69-78
-
-
Kellens, K.1
Dewulf, W.2
Overcash, M.3
Hauschild, M.Z.4
Duflou, J.5
-
95
-
-
0028794853
-
Stochastic approach to experimental analysis of cylindrical lapping process
-
J.-D. Kim, and M.-S. Choi Stochastic approach to experimental analysis of cylindrical lapping process Int. J. Mach. Tools Manuf. 35 1 1995 51 59
-
(1995)
Int. J. Mach. Tools Manuf.
, vol.35
, Issue.1
, pp. 51-59
-
-
Kim, J.-D.1
Choi, M.-S.2
-
96
-
-
84878844128
-
Wirkmechanismen der Kühlung beim Schleifen mit galvanisch belegten CBN-Schleifscheiben mit unterschiedlichen Kühlschmierstoff- Zufuhrbedingungen, Jahrbuch Schleifen
-
B. Kirsch, and J.C. Aurich Wirkmechanismen der Kühlung beim Schleifen mit galvanisch belegten CBN-Schleifscheiben mit unterschiedlichen Kühlschmierstoff-Zufuhrbedingungen, Jahrbuch Schleifen Honen, Läppen und Polieren vol. 65 2011 87 108
-
(2011)
Honen, Läppen und Polieren
, vol.65 VOL.
, pp. 87-108
-
-
Kirsch, B.1
Aurich, J.C.2
-
97
-
-
0033704216
-
Coolant induced forces in CBN high speed grinding with shoe nozzles
-
F. Klocke, A. Baus, and T. Beck Coolant induced forces in CBN high speed grinding with shoe nozzles CIRP Ann. Manuf. Technol. 49 1 2000 241 244
-
(2000)
CIRP Ann. Manuf. Technol.
, vol.49
, Issue.1
, pp. 241-244
-
-
Klocke, F.1
Baus, A.2
Beck, T.3
-
98
-
-
3843128878
-
Trockenschleifen: Grenzbetrachtung zur Kühlschmierstoffreduzierung
-
F. Klocke, and C. Bücker Trockenschleifen: Grenzbetrachtung zur Kühlschmierstoffreduzierung Industrie Diamanten Rundschau 1 1996 26 35
-
(1996)
Industrie Diamanten Rundschau
, vol.1
, pp. 26-35
-
-
Klocke, F.1
Bücker, C.2
-
99
-
-
84883234574
-
High-speed dry grinding with CBN - A borderline case of minimizing the quantity of cooling lubricants
-
F. Klocke, and C. Bücker High-speed dry grinding with CBN - a borderline case of minimizing the quantity of cooling lubricants Prod. Eng. IV 2 1997 15 18
-
(1997)
Prod. Eng.
, vol.IV
, Issue.2
, pp. 15-18
-
-
Klocke, F.1
Bücker, C.2
-
101
-
-
84883241034
-
An approach to sustainability in centerless grinding
-
F. Klocke, B. Linke, B. Meyer, A. Roderburg, and R. Brocker An approach to sustainability in centerless grinding Sustainable Production for Resource Efficiency vol. 54 2010 847 854
-
(2010)
Sustainable Production for Resource Efficiency
, vol.54 VOL.
, pp. 847-854
-
-
Klocke, F.1
Linke, B.2
Meyer, B.3
Roderburg, A.4
Brocker, R.5
-
103
-
-
0001055067
-
Continuous dressing - Dressing conditions determine material removal rates and workpiece quality
-
W. König, and A. von Arciszewski Continuous dressing - dressing conditions determine material removal rates and workpiece quality CIRP Ann. Manuf. Technol. 37 1 1988 303 307
-
(1988)
CIRP Ann. Manuf. Technol.
, vol.37
, Issue.1
, pp. 303-307
-
-
König, W.1
Von Arciszewski, A.2
-
104
-
-
11144229737
-
Effects of polishing techniques on the surface roughness of acrylic denture base resins
-
M. Kuhar, and N. Funduk Effects of polishing techniques on the surface roughness of acrylic denture base resins J. Prosth. Dentist. 93 1 2005 76 85
-
(2005)
J. Prosth. Dentist.
, vol.93
, Issue.1
, pp. 76-85
-
-
Kuhar, M.1
Funduk, N.2
-
105
-
-
79952192442
-
New polishing method using water-based slurry under AC electric field for glass substrate
-
T. Kusumi, Y. Sato, Y. Akagami, and N. Umehara New polishing method using water-based slurry under AC electric field for glass substrate J. Magn. Magn. Mater. 323 10 2011 1394 1397
-
(2011)
J. Magn. Magn. Mater.
, vol.323
, Issue.10
, pp. 1394-1397
-
-
Kusumi, T.1
Sato, Y.2
Akagami, Y.3
Umehara, N.4
-
107
-
-
77955328834
-
Carbon footprint as environmental performance indicator for the manufacturing industry
-
A. Laurent, S.I. Olsen, and M.Z. Hauschild Carbon footprint as environmental performance indicator for the manufacturing industry CIRP Ann. Manuf. Technol. 59 1 2010 37 40
-
(2010)
CIRP Ann. Manuf. Technol.
, vol.59
, Issue.1
, pp. 37-40
-
-
Laurent, A.1
Olsen, S.I.2
Hauschild, M.Z.3
-
108
-
-
0342695590
-
Material removal rate in flat lapping
-
X. Le, and M.L. Peterson Material removal rate in flat lapping J. Manuf. Syst. 18 2 1999 71 78
-
(1999)
J. Manuf. Syst.
, vol.18
, Issue.2
, pp. 71-78
-
-
Le, X.1
Peterson, M.L.2
-
109
-
-
84861648732
-
Eco-efficiency of manufacturing processes: A grinding case
-
W. Li, M. Winter, S. Kara, and C. Herrmann Eco-efficiency of manufacturing processes: a grinding case CIRP Ann. Manuf. Technol. 61 1 2012 59 62
-
(2012)
CIRP Ann. Manuf. Technol.
, vol.61
, Issue.1
, pp. 59-62
-
-
Li, W.1
Winter, M.2
Kara, S.3
Herrmann, C.4
-
110
-
-
84868689122
-
Application of axiomatic design principles to identify more sustainable strategies for grinding
-
B. Linke, and D. Dornfeld Application of axiomatic design principles to identify more sustainable strategies for grinding J. Manuf. Syst. 31 4 2012 412 419
-
(2012)
J. Manuf. Syst.
, vol.31
, Issue.4
, pp. 412-419
-
-
Linke, B.1
Dornfeld, D.2
-
113
-
-
77950918984
-
Removal behaviors of different SiC ceramics during polishing
-
G. Liu, Z. Huang, X. Liu, and D. Jiang Removal behaviors of different SiC ceramics during polishing J. Mater. Sci. Technol. 26 2 2010 125 130
-
(2010)
J. Mater. Sci. Technol.
, vol.26
, Issue.2
, pp. 125-130
-
-
Liu, G.1
Huang, Z.2
Liu, X.3
Jiang, D.4
-
114
-
-
36248940831
-
Thermal analysis of grinding
-
S. Malkin, and C. Guo Thermal analysis of grinding CIRP Ann. Manuf. Technol. 56 2 2007 760 782
-
(2007)
CIRP Ann. Manuf. Technol.
, vol.56
, Issue.2
, pp. 760-782
-
-
Malkin, S.1
Guo, C.2
-
115
-
-
84883248576
-
Hochgeschwindigkeitsschleifen mit CBN-Schleifscheiben, Jahrbuch Schleifen
-
H.-R. Meyer, F. Klocke, and J. Sauren Hochgeschwindigkeitsschleifen mit CBN-Schleifscheiben, Jahrbuch Schleifen Honen, Läppen und Polieren vol. 54 1987 219 240
-
(1987)
Honen, Läppen und Polieren
, vol.54 VOL.
, pp. 219-240
-
-
Meyer, H.-R.1
Klocke, F.2
Sauren, J.3
-
116
-
-
84871339045
-
Energy efficiency optimization of engine by frictional reduction of functional surfaces of cylinder ring-pack system
-
S. Mezghani, D. Ibrahim, M. El Mansori, and H. Zahouani Energy efficiency optimization of engine by frictional reduction of functional surfaces of cylinder ring-pack system Tribol. Int. 59 2013 240 247
-
(2013)
Tribol. Int.
, vol.59
, pp. 240-247
-
-
Mezghani, S.1
Ibrahim, D.2
El Mansori, M.3
Zahouani, H.4
-
117
-
-
0030916432
-
Test parameter analysis in abrasive water jet cutting of rocklike materials
-
A.W. Momber, and R. Kovacevic Test parameter analysis in abrasive water jet cutting of rocklike materials Int. J. Rock Mech. Min. Sci. 34 1 1997 17 25
-
(1997)
Int. J. Rock Mech. Min. Sci.
, vol.34
, Issue.1
, pp. 17-25
-
-
Momber, A.W.1
Kovacevic, R.2
-
118
-
-
27644474612
-
Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels
-
R.D. Monici, E.C. Bianchi, R.E. Catai, and P.R. de Aguiar Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels Int. J. Mach. Tools Manuf. 46 2 2006 122 131
-
(2006)
Int. J. Mach. Tools Manuf.
, vol.46
, Issue.2
, pp. 122-131
-
-
Monici, R.D.1
Bianchi, E.C.2
Catai, R.E.3
De Aguiar, P.R.4
-
119
-
-
43649106595
-
Optimisation of fluid application in grinding
-
M.N. Morgan, A.R. Jackson, H. Wu, V. Baines-Jones, A. Batako, and W.B. Rowe Optimisation of fluid application in grinding CIRP Ann. Manuf. Technol. 57 1 2008 363 366
-
(2008)
CIRP Ann. Manuf. Technol.
, vol.57
, Issue.1
, pp. 363-366
-
-
Morgan, M.N.1
Jackson, A.R.2
Wu, H.3
Baines-Jones, V.4
Batako, A.5
Rowe, W.B.6
-
120
-
-
79957649147
-
A study on energy efficiency improvement for machine tools
-
M. Mori, M. Fujishima, Y. Inamusa, and Y. Oda A study on energy efficiency improvement for machine tools CIRP Ann. Manuf. Technol. 60 1 2011 145 148
-
(2011)
CIRP Ann. Manuf. Technol.
, vol.60
, Issue.1
, pp. 145-148
-
-
Mori, M.1
Fujishima, M.2
Inamusa, Y.3
Oda, Y.4
-
121
-
-
78149434330
-
Loose abrasive slurries for optical glass lapping
-
J. Neauport, J. Destribats, C. Maunier, C. Ambard, P. Cormont, B. Pintault, and O. Rondeau Loose abrasive slurries for optical glass lapping Appl. Opt. 49 30 2010 5736 5745
-
(2010)
Appl. Opt.
, vol.49
, Issue.30
, pp. 5736-5745
-
-
Neauport, J.1
Destribats, J.2
Maunier, C.3
Ambard, C.4
Cormont, P.5
Pintault, B.6
Rondeau, O.7
-
122
-
-
59249104566
-
Performance of a new segmented grinding wheel system
-
T. Nguyen, and L.C. Zhang Performance of a new segmented grinding wheel system Int. J. Mach. Tools Manuf. 49 3-4 2009 291 296
-
(2009)
Int. J. Mach. Tools Manuf.
, vol.49
, Issue.34
, pp. 291-296
-
-
Nguyen, T.1
Zhang, L.C.2
-
123
-
-
4544328872
-
Impact of different slurry and polishing pad choices on the planarization efficiency of a copper CMP process
-
V.H. Nguyen, R. Daamen, and R. Hoofman Impact of different slurry and polishing pad choices on the planarization efficiency of a copper CMP process Microelectron. Eng. 76 1-4 2004 95 99
-
(2004)
Microelectron. Eng.
, vol.76
, Issue.14
, pp. 95-99
-
-
Nguyen, V.H.1
Daamen, R.2
Hoofman, R.3
-
124
-
-
34047232915
-
Engineering case report, wet abrasive blasting with a win nozzle - A case study
-
L.T. Old, and W.A. Heitbrink Engineering case report, wet abrasive blasting with a win nozzle - a case study J. Occup. Environ. Hyg. 4 6 2007 D55 D59
-
(2007)
J. Occup. Environ. Hyg.
, vol.4
, Issue.6
-
-
Old, L.T.1
Heitbrink, W.A.2
-
125
-
-
33750087578
-
Development of environmentally friendly fluid for CBN grinding
-
J.F.G. Oliveira, and S.M. Alves Development of environmentally friendly fluid for CBN grinding CIRP Ann. Manuf. Technol. 55 1 2006 343 346
-
(2006)
CIRP Ann. Manuf. Technol.
, vol.55
, Issue.1
, pp. 343-346
-
-
Oliveira, J.F.G.1
Alves, S.M.2
-
127
-
-
43549101576
-
Analysis of striation formation mechanism in abrasive water jet cutting
-
H. Orbanic, and M. Junkar Analysis of striation formation mechanism in abrasive water jet cutting Wear 265 5-6 2008 821 830
-
(2008)
Wear
, vol.265
, Issue.56
, pp. 821-830
-
-
Orbanic, H.1
Junkar, M.2
-
128
-
-
44749094404
-
Correlation between break-in characteristics and pad surface conditions in silicon wafer polishing
-
K. Park, J. Park, B. Park, and H. Jeong Correlation between break-in characteristics and pad surface conditions in silicon wafer polishing J. Mater. Process. Technol. 205 1-3 2008 360 365
-
(2008)
J. Mater. Process. Technol.
, vol.205
, Issue.13
, pp. 360-365
-
-
Park, K.1
Park, J.2
Park, B.3
Jeong, H.4
-
129
-
-
71749120570
-
The study of cylinder liner plateau honing process
-
P. Pawlus, T. Cieslak, and T. Mathia The study of cylinder liner plateau honing process J. Mater. Process. Technol. 209 20 2009 6078 6086
-
(2009)
J. Mater. Process. Technol.
, vol.209
, Issue.20
, pp. 6078-6086
-
-
Pawlus, P.1
Cieslak, T.2
Mathia, T.3
-
130
-
-
43649105232
-
Simulation for optimizing grain pattern on engineered grinding tools
-
F.W. Pinto, G.E. Vargas, and K. Wegener Simulation for optimizing grain pattern on engineered grinding tools CIRP Ann. Manuf. Technol. 57 1 2008 353 356
-
(2008)
CIRP Ann. Manuf. Technol.
, vol.57
, Issue.1
, pp. 353-356
-
-
Pinto, F.W.1
Vargas, G.E.2
Wegener, K.3
-
131
-
-
0036338471
-
Comparative pulmonary toxicity of blasting sand and five substitute abrasive blasting agents
-
D.W. Porter, A.F. Hubbs, V.A. Robinson, L.A. Battelli, M. Greskevitch, M. Barger, D. Landsittel, W. Jones, V. Castranova, D.W. Porter, A.F. Hubbs, V.A. Robinson, L.A. Battelli, M. Greskevitch, M. Barger, D. Landsittel, W. Jones, and V. Castranova Comparative pulmonary toxicity of blasting sand and five substitute abrasive blasting agents J. Toxicol. Environ. Health A 65 16 2002 1121 1140
-
(2002)
J. Toxicol. Environ. Health A
, vol.65
, Issue.16
, pp. 1121-1140
-
-
Porter, D.W.1
Hubbs, A.F.2
Robinson, V.A.3
Battelli, L.A.4
Greskevitch, M.5
Barger, M.6
Landsittel, D.7
Jones, W.8
Castranova, V.9
Porter, D.W.10
Hubbs, A.F.11
Robinson, V.A.12
Battelli, L.A.13
Greskevitch, M.14
Barger, M.15
Landsittel, D.16
Jones, W.17
Castranova, V.18
-
132
-
-
80051755218
-
Electrolytic in-process dressing superfinishing of spherical bearings using metal-resin bond ultra-fine CBN wheels
-
M.H. Raffles, D.J. Stephenson, P. Shore, and T. Jin Electrolytic in-process dressing superfinishing of spherical bearings using metal-resin bond ultra-fine CBN wheels Proc. Inst. Mech. Eng. 225 1 2011 112 122
-
(2011)
Proc. Inst. Mech. Eng.
, vol.225
, Issue.1
, pp. 112-122
-
-
Raffles, M.H.1
Stephenson, D.J.2
Shore, P.3
Jin, T.4
-
134
-
-
0022375684
-
Schmierstoffe und Kühlschmierstoffe - Ursache von Schädigungen am menschlichen Hautorgan
-
E. Rietschel Schmierstoffe und Kühlschmierstoffe - Ursache von Schädigungen am menschlichen Hautorgan Tribologie+Schmierstofftechnik 32 5: 1985 289 292
-
(1985)
Tribologie+Schmierstofftechnik
, vol.32
, Issue.5
, pp. 289-292
-
-
Rietschel, E.1
-
135
-
-
33744991954
-
Ergonomics of abrasive blasting: A comparison of high pressure water and steel shot
-
B. Rosenberg, L. Yuan, and S. Fulmer Ergonomics of abrasive blasting: a comparison of high pressure water and steel shot Appl. Ergon. 37 5 2006 659 667
-
(2006)
Appl. Ergon.
, vol.37
, Issue.5
, pp. 659-667
-
-
Rosenberg, B.1
Yuan, L.2
Fulmer, S.3
-
136
-
-
29244471284
-
Modelling and analysis of contact stress for automated polishing
-
A. Roswell, F. Xi, and G. Liu Modelling and analysis of contact stress for automated polishing Int. J. Mach. Tools Manuf. 46 3-4 2006 424 435
-
(2006)
Int. J. Mach. Tools Manuf.
, vol.46
, Issue.34
, pp. 424-435
-
-
Roswell, A.1
Xi, F.2
Liu, G.3
-
137
-
-
84883236095
-
Experimental investigation of fire monitors and nozzles
-
H. Rouse, J. Howe, and D. Metzler Experimental investigation of fire monitors and nozzles Trans. Am. Soc. Civil Eng. 117 1 1952 1186 1188
-
(1952)
Trans. Am. Soc. Civil Eng.
, vol.117
, Issue.1
, pp. 1186-1188
-
-
Rouse, H.1
Howe, J.2
Metzler, D.3
-
138
-
-
72149133383
-
Process variability in honing of cylinder liner with vitrified bonded diamond tools
-
L. Sabri, and M. El Mansori Process variability in honing of cylinder liner with vitrified bonded diamond tools Surf. Coat. Technol. 204 6-7 2009 1046 1050
-
(2009)
Surf. Coat. Technol.
, vol.204
, Issue.67
, pp. 1046-1050
-
-
Sabri, L.1
El Mansori, M.2
-
139
-
-
78649988535
-
A study on the influence of bond material on honing engine cylinder bores with coated diamond stones
-
L. Sabri, S. Mezghani, and M. El Mansori A study on the influence of bond material on honing engine cylinder bores with coated diamond stones Surf. Coat. Technol. 205 5 2010 1515 1519
-
(2010)
Surf. Coat. Technol.
, vol.205
, Issue.5
, pp. 1515-1519
-
-
Sabri, L.1
Mezghani, S.2
El Mansori, M.3
-
140
-
-
79957490833
-
Multiscale study of finish-honing process in mass production of cylinder liner
-
L. Sabri, S. Mezghani, M. El Mansori, and H. Zahouani Multiscale study of finish-honing process in mass production of cylinder liner Wear 271 3-4 2011 509 513
-
(2011)
Wear
, vol.271
, Issue.34
, pp. 509-513
-
-
Sabri, L.1
Mezghani, S.2
El Mansori, M.3
Zahouani, H.4
-
141
-
-
67349147517
-
The contribution of PAS 2050 to the evolution of international greenhouse gas emission standards
-
G. Sinden The contribution of PAS 2050 to the evolution of international greenhouse gas emission standards Int. J. Life Cycle Assess. 14 3 2009 195 203
-
(2009)
Int. J. Life Cycle Assess.
, vol.14
, Issue.3
, pp. 195-203
-
-
Sinden, G.1
-
143
-
-
84861592865
-
Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites
-
S.L. Soo, I.S. Shyha, T. Barnett, D.K. Aspinwall, and W.-M. Sim Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites CIRP Ann. Manuf. Technol. 61 1 2012 295 298
-
(2012)
CIRP Ann. Manuf. Technol.
, vol.61
, Issue.1
, pp. 295-298
-
-
Soo, S.L.1
Shyha, I.S.2
Barnett, T.3
Aspinwall, D.K.4
Sim, W.-M.5
-
144
-
-
84883233442
-
Polishing
-
L. Laperrière, G. Reinhart, Springer-Verlag Berlin, Heidelberg 10.1007/SpringerReference-341103 ()
-
F. Sousa Polishing L. Laperrière, G. Reinhart, CIRP Encyclopedia of Production Engineering: Springer Reference 2012 Springer-Verlag Berlin, Heidelberg 1 10.1007/SpringerReference-341103 (www.springerreference.com)
-
(2012)
CIRP Encyclopedia of Production Engineering: Springer Reference
, pp. 1
-
-
Sousa, F.1
-
145
-
-
58149327311
-
Optimization of the kinematics available in the polishing process of ceramic tiles by computational simulations
-
F.J.P. Sousa, J.C. Aurich, W.L. Weingaertner, and O.E. Alarcon Optimization of the kinematics available in the polishing process of ceramic tiles by computational simulations J. Am. Ceram. Soc. 92 1 2009 41 48
-
(2009)
J. Am. Ceram. Soc.
, vol.92
, Issue.1
, pp. 41-48
-
-
Sousa, F.J.P.1
Aurich, J.C.2
Weingaertner, W.L.3
Alarcon, O.E.4
-
146
-
-
0033389084
-
Dry-ice blasting for cleaning: Process, optimization and application
-
G. Spur, E. Uhlmann, and F. Elbing Dry-ice blasting for cleaning: process, optimization and application Wear 233-235 1999 402 411
-
(1999)
Wear
, vol.233-235
, pp. 402-411
-
-
Spur, G.1
Uhlmann, E.2
Elbing, F.3
-
147
-
-
70449633173
-
Effect of minimum quantity lubrication (MQL) with nanofluids on grinding behavior and thermal distortion
-
U. Sridharan, and S. Malkin Effect of minimum quantity lubrication (MQL) with nanofluids on grinding behavior and thermal distortion Trans. N. Am. Manuf. Res. Inst. Soc. Manuf. Eng. 37 2009 629 636
-
(2009)
Trans. N. Am. Manuf. Res. Inst. Soc. Manuf. Eng.
, vol.37
, pp. 629-636
-
-
Sridharan, U.1
Malkin, S.2
-
149
-
-
0034325150
-
An experimental study on tool wear of hydrodynamic polishing process
-
Y.-T. Su, T.-C. Hung, and C.-C. Horng An experimental study on tool wear of hydrodynamic polishing process Wear 246 1-2 2000 117 129
-
(2000)
Wear
, vol.246
, Issue.12
, pp. 117-129
-
-
Su, Y.-T.1
Hung, T.-C.2
Horng, C.-C.3
-
150
-
-
0035443786
-
A preliminary study on smoothing efficiency of surface irregularities by hydrodynamic polishing process
-
Y.-T. Su, S.-H. Liu, and Y.-W. Chen A preliminary study on smoothing efficiency of surface irregularities by hydrodynamic polishing process Wear 249 9 2001 808 820
-
(2001)
Wear
, vol.249
, Issue.9
, pp. 808-820
-
-
Su, Y.-T.1
Liu, S.-H.2
Chen, Y.-W.3
-
151
-
-
0033750290
-
Material removal in the optical polishing of hydrophilic polymer materials
-
J. Sun, L.C. Zhang, Y.-W. Mai, S. Payor, and M. Hogg Material removal in the optical polishing of hydrophilic polymer materials J. Mater. Process. Technol. 103 2 2000 230 236
-
(2000)
J. Mater. Process. Technol.
, vol.103
, Issue.2
, pp. 230-236
-
-
Sun, J.1
Zhang, L.C.2
Mai, Y.-W.3
Payor, S.4
Hogg, M.5
-
152
-
-
34547538175
-
Removal rate and surface roughness in the lapping and polishing of RB-SiC optical components
-
H.Y. Tam, H.B. Cheng, and Y.W. Wang Removal rate and surface roughness in the lapping and polishing of RB-SiC optical components J. Mater. Process. Technol. 192-193 2007 276 280
-
(2007)
J. Mater. Process. Technol.
, vol.192-193
, pp. 276-280
-
-
Tam, H.Y.1
Cheng, H.B.2
Wang, Y.W.3
-
153
-
-
78650717374
-
Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheel
-
T. Tawakoli, and B. Azarhoushang Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheel Int. J. Mach. Tools Manuf. 51 2 2011 112 119
-
(2011)
Int. J. Mach. Tools Manuf.
, vol.51
, Issue.2
, pp. 112-119
-
-
Tawakoli, T.1
Azarhoushang, B.2
-
154
-
-
77955227814
-
Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant-lubricant types
-
T. Tawakoli, M.J. Hadad, and M.H. Sadeghi Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant-lubricant types Int. J. Mach. Tools Manuf. 50 8 2010 698 708
-
(2010)
Int. J. Mach. Tools Manuf.
, vol.50
, Issue.8
, pp. 698-708
-
-
Tawakoli, T.1
Hadad, M.J.2
Sadeghi, M.H.3
-
155
-
-
84883209536
-
Trockenschleifen mit CBN-Schleifscheiben - Ein innovatives Konzept, Jahrbuch Schleifen
-
T. Tawakoli, and M. Rabiey Trockenschleifen mit CBN-Schleifscheiben - ein innovatives Konzept, Jahrbuch Schleifen Honen, Läppen und Polieren vol. 63 2007 100 118
-
(2007)
Honen, Läppen und Polieren
, vol.63 VOL.
, pp. 100-118
-
-
Tawakoli, T.1
Rabiey, M.2
-
156
-
-
0003545437
-
-
The World Commission on Environment and Development
-
The World Commission on Environment and Development Our Common Future 1987
-
(1987)
Our Common Future
-
-
-
159
-
-
0029709132
-
Removal rate and surface roughness in high-precision lapping of Mn-Zn ferrite
-
M. Touge, and T. Matsuo Removal rate and surface roughness in high-precision lapping of Mn-Zn ferrite CIRP Ann. Manuf. Technol. 45 1 1996 307 310
-
(1996)
CIRP Ann. Manuf. Technol.
, vol.45
, Issue.1
, pp. 307-310
-
-
Touge, M.1
Matsuo, T.2
-
161
-
-
67649827310
-
Robotic polishing of precision molds with uniform material removal control
-
M.J. Tsai, J.F. Huang, and W.L. Kao Robotic polishing of precision molds with uniform material removal control Int. J. Mach. Tools Manuf. 49 11 2009 885 895
-
(2009)
Int. J. Mach. Tools Manuf.
, vol.49
, Issue.11
, pp. 885-895
-
-
Tsai, M.J.1
Huang, J.F.2
Kao, W.L.3
-
162
-
-
84883247532
-
Lapping
-
L. Laperrière, G. Reinhart, Springer-Verlag Berlin, Heidelberg 10.1007/SpringerReference-341102 ()
-
E. Uhlmann Lapping L. Laperrière, G. Reinhart, CIRP Encyclopedia of Production Engineering: Springer Reference 2012 Springer-Verlag Berlin, Heidelberg 1 10.1007/SpringerReference-341102 (www.springerreference.com)
-
(2012)
CIRP Encyclopedia of Production Engineering: Springer Reference
, pp. 1
-
-
Uhlmann, E.1
-
163
-
-
84875624944
-
Analyse von Schleifprozessen mit genuteten Schleifscheiben
-
online
-
E. Uhlmann, J. Mewis, and L. Hochschild Analyse von Schleifprozessen mit genuteten Schleifscheiben Werkstatttechnik 100 6 2010 494 501 online
-
(2010)
Werkstatttechnik
, vol.100
, Issue.6
, pp. 494-501
-
-
Uhlmann, E.1
Mewis, J.2
Hochschild, L.3
-
164
-
-
84857172021
-
Resource efficient grinding - Solutions and restrictions
-
E. Uhlmann, C. Sammler, and F. Byrne Resource efficient grinding - solutions and restrictions Int. J. Mechatr. Manuf. Syst. 4 6 2011 487 495
-
(2011)
Int. J. Mechatr. Manuf. Syst.
, vol.4
, Issue.6
, pp. 487-495
-
-
Uhlmann, E.1
Sammler, C.2
Byrne, F.3
-
166
-
-
34547514123
-
Developing the polymer abrasive gels in AFM process
-
A.C. Wang, and S.H. Weng Developing the polymer abrasive gels in AFM process J. Mater. Process. Technol. 192-193 2007 486 490
-
(2007)
J. Mater. Process. Technol.
, vol.192-193
, pp. 486-490
-
-
Wang, A.C.1
Weng, S.H.2
-
167
-
-
0041083189
-
Computer-controlled lapping system for granite surface plates
-
J. Wang, B. Zhang, and B. Xue Computer-controlled lapping system for granite surface plates J. Manuf. Syst. 19 3 2000 149 155
-
(2000)
J. Manuf. Syst.
, vol.19
, Issue.3
, pp. 149-155
-
-
Wang, J.1
Zhang, B.2
Xue, B.3
-
168
-
-
77955514284
-
Modeling effects of abrasive particle size and concentration on material removal at molecular scale in chemical mechanical polishing
-
Y. Wang, Y. Zhao, W. An, Z. Ni, and J. Wang Modeling effects of abrasive particle size and concentration on material removal at molecular scale in chemical mechanical polishing Appl. Surf. Sci. 257 1 2010 249 253
-
(2010)
Appl. Surf. Sci.
, vol.257
, Issue.1
, pp. 249-253
-
-
Wang, Y.1
Zhao, Y.2
An, W.3
Ni, Z.4
Wang, J.5
-
169
-
-
0038176419
-
Assessment of grinding fluid effectiveness in continuous-dress creep feed grinding
-
J. Webster, E. Brinksmeier, C. Heinzel, M. Wittmann, and K. Thoens Assessment of grinding fluid effectiveness in continuous-dress creep feed grinding CIRP Ann. Manuf. Technol. 51 1 2002 235 240
-
(2002)
CIRP Ann. Manuf. Technol.
, vol.51
, Issue.1
, pp. 235-240
-
-
Webster, J.1
Brinksmeier, E.2
Heinzel, C.3
Wittmann, M.4
Thoens, K.5
-
171
-
-
80051665802
-
Conditioning and monitoring of grinding wheels
-
K. Wegener, H.-W. Hoffmeister, B. Karpuschewski, F. Kuster, W.-C. Hahmann, and M. Rabiey Conditioning and monitoring of grinding wheels CIRP Ann. Manuf. Technol. 60 2 2011 757 777
-
(2011)
CIRP Ann. Manuf. Technol.
, vol.60
, Issue.2
, pp. 757-777
-
-
Wegener, K.1
Hoffmeister, H.-W.2
Karpuschewski, B.3
Kuster, F.4
Hahmann, W.-C.5
Rabiey, M.6
-
172
-
-
34547665290
-
Study on ultrasonic-assisted lapping of gears
-
B.Y. Wei, X.Z. Deng, and Z.D. Fang Study on ultrasonic-assisted lapping of gears Int. J. Mach. Tools Manuf. 47 12-13 2007 2051 2056
-
(2007)
Int. J. Mach. Tools Manuf.
, vol.47
, Issue.1213
, pp. 2051-2056
-
-
Wei, B.Y.1
Deng, X.Z.2
Fang, Z.D.3
-
173
-
-
12344316078
-
Dry machining and minimum quantity lubrication
-
K. Weinert, I. Inasaki, J. Sutherland, and T. Wakabayashi Dry machining and minimum quantity lubrication CIRP Ann. Manuf. Technol. 53 2 2004 511 537
-
(2004)
CIRP Ann. Manuf. Technol.
, vol.53
, Issue.2
, pp. 511-537
-
-
Weinert, K.1
Inasaki, I.2
Sutherland, J.3
Wakabayashi, T.4
-
174
-
-
84883257028
-
Dressing
-
L. Laperrière, G. Reinhart, Springer-Verlag Berlin, Heidelberg ()
-
E. Weingärtner, K. Wegener, and M. Rabiey Dressing L. Laperrière, G. Reinhart, CIRP Encyclopedia of Production Engineering: Springer Reference 2012 Springer-Verlag Berlin, Heidelberg 1 (www.springerreference.com)
-
(2012)
CIRP Encyclopedia of Production Engineering: Springer Reference
, pp. 1
-
-
Weingärtner, E.1
Wegener, K.2
Rabiey, M.3
-
176
-
-
84883234444
-
Managing hand-arm vibration in abrasive processes
-
N. Willcock Managing hand-arm vibration in abrasive processes The Abrasives Hub 2011 http://www.abrasiveshub.com/index.php?page=31&lang= EN&itm
-
(2011)
The Abrasives Hub
-
-
Willcock, N.1
-
177
-
-
84883234771
-
Methode zur Bewertung der Kühlwirkung des Kühlschmierstoff- Zufuhrsystems beim Schleifen
-
M. Wittmann Methode zur Bewertung der Kühlwirkung des Kühlschmierstoff-Zufuhrsystems beim Schleifen Tribol. Lubric. Eng. 14 2004 881 893
-
(2004)
Tribol. Lubric. Eng.
, vol.14
, pp. 881-893
-
-
Wittmann, M.1
-
179
-
-
0041562590
-
Mechanisms of abrasive wear in the grinding of titanium (TC4) and nickel (K417) alloys
-
X. Xu, Y. Yu, and H. Huang Mechanisms of abrasive wear in the grinding of titanium (TC4) and nickel (K417) alloys Wear 255 7-12 2003 1421 1426
-
(2003)
Wear
, vol.255
, Issue.712
, pp. 1421-1426
-
-
Xu, X.1
Yu, Y.2
Huang, H.3
-
180
-
-
78650871045
-
Polishing experiments on surface quality of building stone tiles
-
H. Yavuz, T. Ozkahraman, and S. Demirdag Polishing experiments on surface quality of building stone tiles Construct. Build. Mater. 25 4 2011 1707 1711
-
(2011)
Construct. Build. Mater.
, vol.25
, Issue.4
, pp. 1707-1711
-
-
Yavuz, H.1
Ozkahraman, T.2
Demirdag, S.3
-
181
-
-
0041842503
-
Lapping of single crystal diamond tools
-
Z.J. Yuan, Y.X. Yao, M. Zhou, and Q.S. Bal Lapping of single crystal diamond tools CIRP Ann. Manuf. Technol. 52 1 2003 285 288
-
(2003)
CIRP Ann. Manuf. Technol.
, vol.52
, Issue.1
, pp. 285-288
-
-
Yuan, Z.J.1
Yao, Y.X.2
Zhou, M.3
Bal, Q.S.4
-
182
-
-
33750056113
-
Speed stroke grinding of γ-titanium aluminides
-
C. Zeppenfeld, and F. Klocke Speed stroke grinding of γ-titanium aluminides CIRP Ann. Manuf. Technol. 55 1 2006 333 338
-
(2006)
CIRP Ann. Manuf. Technol.
, vol.55
, Issue.1
, pp. 333-338
-
-
Zeppenfeld, C.1
Klocke, F.2
-
183
-
-
68049137510
-
Study on the abrasive effecting factors of the removal rate during dual-lapping sapphire wafer
-
K. Zhang, D. Wen, and J. Yuan Study on the abrasive effecting factors of the removal rate during dual-lapping sapphire wafer Key Eng. Mater. 407-408 2009 550 554
-
(2009)
Key Eng. Mater.
, vol.407-408
, pp. 550-554
-
-
Zhang, K.1
Wen, D.2
Yuan, J.3
-
184
-
-
80051552028
-
Effect of mechanical process parameters on friction behavior and material removal during sapphire chemical mechanical polishing
-
Z. Zhang, W. Yan, L. Zhang, W. Liu, and Z. Song Effect of mechanical process parameters on friction behavior and material removal during sapphire chemical mechanical polishing Microelectron. Eng. 88 9 2011 3020 3023
-
(2011)
Microelectron. Eng.
, vol.88
, Issue.9
, pp. 3020-3023
-
-
Zhang, Z.1
Yan, W.2
Zhang, L.3
Liu, W.4
Song, Z.5
-
185
-
-
64449086353
-
Experimental study on abrasive waterjet polishing for hard-brittle materials
-
H.T. Zhu, C.Z. Huang, J. Wang, Q.L. Li, and C.L. Che Experimental study on abrasive waterjet polishing for hard-brittle materials Int. J. Mach. Tools Manuf. 49 7-8 2009 569 578
-
(2009)
Int. J. Mach. Tools Manuf.
, vol.49
, Issue.78
, pp. 569-578
-
-
Zhu, H.T.1
Huang, C.Z.2
Wang, J.3
Li, Q.L.4
Che, C.L.5
-
186
-
-
33746645185
-
Contact accuracy and orientations affecting the lapped tool sharpness of diamond cutting tools by mechanical lapping
-
W.J. Zong, D. Li, T. Sun, and K. Cheng Contact accuracy and orientations affecting the lapped tool sharpness of diamond cutting tools by mechanical lapping Diamond Relat. Mater. 15 9 2006 1424 1433
-
(2006)
Diamond Relat. Mater.
, vol.15
, Issue.9
, pp. 1424-1433
-
-
Zong, W.J.1
Li, D.2
Sun, T.3
Cheng, K.4
-
187
-
-
77649341764
-
The basic issues in design and fabrication of diamond-cutting tools for ultra-precision and nanometric machining
-
6078-6086 ls Processing Technology, 209/20
-
W.J. Zong, Z.Q. Li, T. Sun, K. Cheng, D. Li, and S. Dong The basic issues in design and fabrication of diamond-cutting tools for ultra-precision and nanometric machining Int. J. Mach. Tools Manuf. 50/4 411-419 2010 6078 6086 ls Processing Technology, 209/20
-
(2010)
Int. J. Mach. Tools Manuf.
, vol.50
, Issue.4
, pp. 411-419
-
-
Zong, W.J.1
Li, Z.Q.2
Sun, T.3
Cheng, K.4
Li, D.5
Dong, S.6
|