Life cycle analysis of grinding

Leveraging Technology for a Sustainable World - Proceedings of the 19th CIRP Conference on Life Cycle Engineering

Volumn , Issue , 2012, Pages 293-298

  Linke, Barbara ^a   Overcash, Michael ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b WICHITA STATE UNIVERSITY   (United States)

Author keywords

Grinding; Specific energy; Unit process LCI

Indexed keywords

FLOORS; GRINDING (MACHINING); STABILITY CRITERIA; SUSTAINABLE DEVELOPMENT;

COOLING LUBRICANTS; DIMENSIONAL TOLERANCE; ENVIRONMENTAL ASPECTS; INTEGRATED ANALYSIS; LIFE CYCLE ANALYSIS; LIFE CYCLE INVENTORY; PRODUCT LIFE CYCLES; SPECIFIC ENERGY;

LIFE CYCLE;

EID: 84883248820     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1007/978-3-642-29069-5_50     Document Type: Conference Paper

References (35)

1. Klocke, F. (2008): Manufacturing Processes 2: Grinding, Honing, Lapping, Springer, ISBN 978-35-4092-2582.
2. Eckebrecht, J. (2000): Umweltverträgliche Gestaltung von spanenden Fertigungsprozessen - Forschungsansätze und Wissenstransfer, PhD thesis at the University of Bremen, ISBN 978-3-8265-7661-4.
3. Denkena, B., Reichstein, M., Kramer, N., Jacobsen, J., Jung, M. (2005): Eco- and Energy-Efficient Grinding Processes, Key Engineering Materials Vols. 291-292, p. 39-44.
4. Klocke, F., Linke, B., Meyer, B., Roderburg, A. (2010): Sustainability Aspects in Centerless Grinding, Proc. of the Conf. of Sustainable Life in Manufacturing SLIM2010, May 24-25, 2010, Egirdir, Turkey.
5. Oliveira, J. F. G., Silva, E. J., Guo, C., Hashimoto, F. (2009): Challenges in grinding, Annals of the CIRP Vol. 58/2/2009, p. 663-680.
6. Tönshoff, H. K., Peters, J., Inasaki, I., Paul, T. (1992): Modelling and Simulation of Grinding Processes, Annals of the CIRP Vol. 41/2/1992, p. 677 ff.
7. UPLCI (2010) online database and taxonomy (Screening Approach), Last Accessed June 20, 2011, http://cratel.wichita.edu/uplci.
8. CO2PE! Cooperative Effort on Process Emissions in Manufacturing website, Last Accessed June 20, 2011, http://www.mech.kuleuven. be/co2pe.
9. Malkin, S., Guo, C. (2008): Grinding Technology - Theory and applications of machining with abrasives, Second Edition, Industrial Press New York.
10. Marinescu, I. D., Hitchiner, M., Uhlmann, E., Rowe, W. B., Inasaki, I. (2007): Handbook of Machining with Grinding Wheels, CRC Press Group, ISBN 1-57444-671-1.
11. Brinksmeier, E., Heinzel, C., Wittmann, M. (1999): Friction, Cooling and Lubrication in Grinding, Keynote Paper, Annals of the CIRP Vol. 48/2/1999, p. 581 ff.
12. Beck, T. (2002): Kühlschmierstoffeinsatz beim Schleifen mit CBN, PhD-thesis RWTH Aachen University.
13. Badger, J. (2009): Cooling in Grinding - Environmental Considerations of Quantity, Disposal and Energy Consumption, The 7th CIRP Conf. on Sustainable Manufacturing, 2009, India.
14. Friedrich, D. (2006): Nadeldüsen senken die Temperatur während des Schleifprozesses, Schleifen + Polieren 1/2006, p. 19-21.
15. Reinhardt, S., Maretta, L., Robinson, S., Linke, B. (2011): LMAS report on Life Cycle Assessment for Discrete Manufacturing Processes.
16. Morgan, M. N., Jackson, A. R., Wua, H., Batako, A., Rowe, W. B. (2008): Optimisation of Fluid Application in Grinding, Annals of the CIRP, Vol. 57/1/2008, p. 363-366.
17. Wittmann, M. (2007): Bedarfsgerechte Kühlschmierung beim Schleifen, PhD-thesis University of Bremen.
18. Kalita, P., Malshe, A. P., Kumar, S. A., Yoganath, V. G., Gurumurthy, T. (2011): Study of Specific Energy and Friction Coefficient in Minimum Quantity Lubrication Grinding Using Oil-Based Nanolubricants, Proc. of NAMRI/SME, Vol. 39, 2011.
19. Zein, A., Oehlschlaeger, G., Herrmann, C. (2011): Polymer Water as Optimal Cutting Fluid - An Analysis of Environmental Advantages, Proc. of the 44th CIRP Int. Conf. on Manufacturing Systems, Madison, WI, USA, June 1-3, 2011.
20. Helletsberger, H. (2005): Grindology Papers G1-G7, Grindology College of Tyrolit Schleifmittelwerke Swarovski K. G., 2005-2010.
21. Rowe, W. B. (2009): Principles of Modern Grinding Technology, William Andrew, ISBN 978-0-8155-2018-4.
22. Reinhart, G., Reinhardt, S., Foeckerer, T., Zaeh, M. (2011): Comparison of the Resource Efficiency of Alternative Process Chains for Surface Hardening, Proc. of the 18th CIRP Int. Conf. on Life Cycle Engineering, Braunschweig, Germany, May 2-4, 2011.
23. Helu, M., Vijayaraghavan, A., Dornfeld, D. (2011): Evaluating the Relationship between Use Phase Environmental Impacts and Manufacturing Process Precision, Annals of the CIRP Vol. 60/1/2011, p. 49-52.
24. rd edition, Addison-Wesley, ISBN 0-201-82370-5.
25. Zeppenfeld, C. (2005): Schnellhubschleifen von Γ-Titanaluminiden, PhD-thesis RWTH Aachen University.
26. Ilio, A. Di, Paoletti, A., D'Addona, D. (2009): Characterization and modelling of the grinding process of metal matrix, Annals of the CIRP Vol. 58/1/2009, p. 291-294.
27. Li, Z. C., Lin, B., Xu, Y. S., Hu, J. (2002): Experimental studies on grinding forces and force ratio of the unsteady-state grinding technique, Journal of Materials Processing Technology, Vol. 129, Issues 1-3, 11 Oct. 2002, p. 76-80.
28. Dornfeld, D. (2010): Sustainable Manufacturing - Greening Processes, Systems and Products, Proc. ICMC Sustainable Production for Resource Efficiency and Ecomobility, Chemnitz, Germany, September 2010.
29. Zein, A., Li, W., Herrmann, C., Kara, S. (2011): Energy Efficiency Measures for the Design and Operation of Machine Tools: An Axiomatic Approach, Proc. of the 18th CIRP Conf. on Life Cycle Engineering, Braunschweig, Germany, May 2-4, 2011, p. 274-279.
30. Baniszewski, B. (2005): An environmental impact analysis of grinding, B. Sc. thesis at the Massachusetts Institute of Technology.
31. Diaz, N., Helu, M., Jayanathan, S., Chen, Y., Horvath, A., and Dornfeld, D. (2010): Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments, IEEE Int. Symposium on Sustainable Systems and Technology (ISSST2010), Washington, D. C., USA.
32. Schön, J., Buchmüller, K., Dahmen, N., Griesheimer, P., Schwab, P., Wilde, H. (2003): EMSIC - Ein Pfiffiges Verfahren zur Entölung von Metall- und Glas-Schleifschlämmen; Wissenschaftliche Berichte FZKA 6799, Karlsruhe.
33. Knight, A. (1822): Observations on the Grinder's Asthma, University of London Library.
34. Dornfeld, D. (2010): Green Manufacturing, http://greenmanufacturing.blogspot.com/2010/02/paper-or-plastic.html (access on Sept 26, 2011).
35. Raab, A., Klocke, F. (2007): Flexible Hochleistungshartendbearbeitung von Wellenbauteilen, Shaker Verlag, ISBN 978-3-8322-6049-1.