Nano-scale wear: A review

International Journal of Precision Engineering and Manufacturing

Volumn 13, Issue 9, 2012, Pages 1709-1718

  Kim, Hae Jin ^a   Yoo, Shin Sung ^a   Kim, Dae Eun ^a  

^a Yonsei University   (South Korea)

Author keywords

Friction; Nano scale; Nano wear; Tribology

Indexed keywords

FRICTION; NANOTECHNOLOGY; TRIBOLOGY;

COMPLEX NATURE; EXPERIMENTAL INVESTIGATIONS; FRICTION AND WEAR; MECHANICAL SYSTEMS; MICRO SYSTEMS TECHNOLOGIES; NANO SCALE; NANO WEAR; ULTRA PRECISION;

WEAR OF MATERIALS;

EID: 84870552151     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-012-0224-y     Document Type: Review

References (73)

1. Gahr, K. Z., "Microstructure and wear of materials," Elsevier, 1987.
2. Kim, H. J. and Kim, D. E., "Nano-scale Friction: A review," Int. J. Precis. Eng. Manuf., Vol. 10, No. 2, pp. 141-151, 2009.
3. Bhushan, B., "Principles and applications of tribology," John Wiley & Sons, Inc, 1999.
4. Jost, H. P., "Tribology-origin and future," Wear, Vol. 136, No. 1, pp. 1-17, 1990.
5. Kang, K. H., Kim, H. J., and Kim, D. E., "Characteristics of progressive damage of ZnO nanowires during contact sliding under relatively low loads," J. of Nanomat., Vol. 2011, Article ID 624195, 2011.
6. Kim, H. J. and Kim, D. E., "Effect of surface roughness of top cover layer on the efficiency of dye-sensitized solar cell," Solar Energy, Vol. 86, No. 7, pp. 2049-2055, 2012.
7. Stachowiak, G. W., "Wear - materials, mechanisms and practice," John Wiley & Sons, Inc, 2005.
8. Archard, J. F., "Contacting and rubbing of flat surfaces," J. of Appl. Phys., Vol. 24, No. 8, pp. 981-988, 1953.
9. Rabinowicz, E., "Friction and wear of materials," John Wiley & Sons, Inc, 1995.
10. Bhushan, B. and Kwak, K. J., "Velocity dependence of nanoscale wear in atomic force microscopy," Appl. Phys. Lett., Vol. 91, No. 16, Paper No. 163113, 2007.
11. Gnecco, E., Bennewitz, R., and Meyer, E., "Abrasive wear on atomic scale," Appl. Phys. Lett., Vol. 88, No. 21, Paper No. 215501, 2002.
12. Ovcharenko, A., Halperin, G., and Etision, I., "In situ and real-time optical investigation of junction growth in spherical elastic-plastic contact," Wear, Vol. 264, No. 11, pp. 1043-1050, 2008.
13. Bennewitz, R. and Dickinson, J. T., "Fundamental studies of nanometer-scale wear mechanisms," MRS Bull., Vol. 33, pp. 1174-1180, 2008.
14. Wakuda, M., Yamauchi, Y., Kanzaki, S., and Yasuda, Y., "Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact," Wear, Vol. 254, No. 3, pp. 356-363, 2003.
15. Chouquet, C., Gavillet, J., Ducros, C., and Sanchette, F., "Effect of DLC surface texturing on friction and wear during lubricated sliding," Mat. Chem. And Phys., Vol. 123, No. 2, pp. 367-371, 2010.
16. Luo, J., Meng, Y., Shao, T., and Zhao, Q., "Advanced Tribology: Proc. of CIST2008 & ITS-IFToMM2008," Springer, 2010.
17. Deng, J. and Braun, M., "DLC multilayer coatings for wearprotection," Diamond Relat. Mater., Vol. 4, No. 7, pp. 936-943, 1995.
18. Chowalla, M. and Amaratunga G., "Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear," Nature, Vol. 407, pp. 164-167, 2000.
19. Sheng, X., Yu, S., Luo, X., and He, S., "Wear behavior of graphite studies in an air-conditioned environment," Nucl. Eng. and Design, Vol. 223, No. 2, pp. 109-115, 2003.
20. Bhushan, B., "Nanotribology and nanomechanics-An introduction," Springer, 2005.
21. Liskiewicz, T. W., Beake, B. D., and Smith, J. F., "In situ accelerated micro-wear - A new technique to fill the measurement gap," Surf. & Coat. Tech., Vol. 205, pp. 1455-1459, 2010.
22. Cagin, T., Che, J., Gardos, M., Fijany, A., and Goddard, W., "Simulation and experiments on friction and wear of diamond: a material for MEMS and NEMS application," Nanotechnology, Vol. 10, pp. 278-284, 1999.
23. Adams, J., Hector, L., Siegel, D., Yu, H., and Zhong, J., "Adhesion, lubrication and wear on the atomic scale," Surf. Interface Anal., Vol. 31, pp. 619-626, 2001.
24. Bhaskaran, H., Gotsmann, B., Sebastian, A., Drechsler, U., Lantz, M., Despont, M., Jaroenapibal, P., Carpick, R., Chen, Y., and Sridharan, K., "Ultralow nanoscale wear through atom-by-atom attrition in silicon-containing diamond-like carbon," Nature Nanotech., Vol. 5, pp. 181-185, 2010.
25. Jacobs, T., Gotsmann, B., Lantz, M., and Carpick, R., "On the application of transition state theory to atomic-scale wear," Tribol. Lett., Vol. 39, pp. 257-271, 2010.
26. Kang, K. H., Penkov, O., Kim, H. J., and Kim, D. E., "Effectiveness of bubble structure in contact damage reduction of Au film," Tribol. Int., Vol. 55, pp. 40-45, 2012.
27. Kim, C. L., Kim, Y. T., Lee, K. S., Kim, D. E., Ko, Y. G., and Jang, Y. S., "Damage of rotary tool for removal of intravascular blood clots," Int. J. Precis. Eng. Manuf., Vol. 13, No. 3, pp. 413-419, 2012.
28. Lin, L. Y. and Kim, D. E., "Tribological properties of polymer/silica composite coatings for microsystems applications," Tribol. Int., Vol. 44, No. 12, pp. 1926-1931, 2012.
29. Cho, M. H., "The role of transfer film and back transfer behavior on the tribological performance of polyoxymethylene in sliding," J. of Mech. Sci. and Tech., Vol. 23, pp. 2291-2298, 2009.
30. Pham, D. C., Na, K., Yang, S., Kim, J., and Yoon, E., "Nanotribological properties of silicon nano-pillars coated by Z-DOL lubricating film," J. of Mech. Sci. and Tech., Vol. 24, pp. 59-65, 2010.
31. Carpick, R., "Scratching the surface: Fundamental investigations of tribology with atomic force microscopy," Chem. Rev., Vol. 97, pp. 1163-1194, 1997.
32. Chung, K. H., Lee, Y. H., and Kim, D. E., "Characteristics of fracture during the approach process and wear mechanism of a silicon AFM tip," Ultramicroscopy, Vol. 102, pp. 161-171, 2005.
33. Chung, K. H. and Kim, D. E., "Wear characteristics of diamond coated atomic force microscope probe," Ultramicroscopy, Vol. 108, pp. 1-10, 2007.
34. Sung, I. H., "Development of mechano-chemical nanolithography technology based on nanotribological interactions," Ph.D. Thesis, Department of Mechanical Engineering, Yonsei University, 2004.
35. Chung, K. H. and Kim, D. E., "Fundamental investigation of micro-wear rate using an atomic force microscope," Tribol. Lett., Vol. 15, No. 2, pp. 135-144, 2003.
36. Beerschwinger, U., Albrecht, T., Mathieson, D., Reuben, R. L., Yang, S. J., and Taghizadeh, M., "Wear at microscopic scales and light loads for MEMS applications," Wear, Vol. 181-183, pp. 426-435, 1995.
37. Gotsmann, B. and Lantz, M., "Atomistic wear in a single asperity sliding contact," Phys. Rev. Lett., Vol. 101, Paper No. 125501, 2008.
38. Chung, K. H., Lee, Y. H., Kim, D. E., Yoo, J., and Hong, S., "Tribological characteristics of probe tip and PZT media for AFM-based recording technology," IEEE Trans. on Magn., Vol. 41, No. 2, pp. 849-854, 2005.
39. Maw, W., Stevens, F., Langford, S. C., and Dickinson, J. T., "Single asperity tribochemical wear of silicon nitride studied by atomic force microscopy," J. of Appl. Phys., Vol. 92, No. 9, Paper No. 5103, 2002.
40. Liu, J., Notbohm, J. K., Carpick, R. W., and Turner, K. T., "Method for characterizing nanoscale wear of atomic force microscope tips," ACS Nano, Vol. 4, No. 7, pp. 3763-3772, 2010.
41. Tambe, T. S. and Bhushan, B., "Nanowear mapping: a novel atomic force microscopy based approach for studying nanoscale wear at high sliding velocities," Tribol. Lett., Vol. 20, No. 1, pp. 83-90, 2005.
42. Lantz, M. A., Wiesmann, D., and Gotsmann, B., "Dynamic superlubricity and the elimination of wear on the nanoscale," Nature Nanotech., Vol. 4, pp. 586-591, 2009.
43. Liu, J., Grierson, D. S., Moldovan, N., Notbohm, J., Li, S., Jaroenapibal, P., O'Connor, S. D., Sumant, A. V., Neelakantan, N., Carlisle, J. A., Turner, K. T., and Carpick, R. W., "Preventing nanoscale wear of atomic force microscopy tips through the use of monolithic ultrananocrystalline diamond probes," Small, Vol. 6, No. 10, pp. 1140-1149, 2010.
44. Lin, L. Y., Kim, D. E., Kim, W. K., and Jun, S. C., "Friction and wear characterisitics of multi-layer graphene films investigated by atomic force microscopy," Surf. & Coat. Tech., Vol. 205, pp. 4864-4869, 2011.
45. Fan, L. S., Tai, Y. C., and Muller, R. S., "Integrated movable micromechanical structures for sensors and actuators," IEEE T. Electron Dev., Vol. 35, pp. 724-730, 1988.
46. Maboudian, R., "Surface process in MEMS technology," Surf. Sci. Reports, Vol. 30, pp. 207-269, 1998.
47. Krause, P., Obermeier, E., and Wehl, W., "A micromachined single-chip inkjet printhead," Sensor Acuat. A-Phys., Vol. 53, No. 1-3, pp. 405-409, 1996.
48. Amini, B. V. and Ayzi, F., "Micro-gravity capacitive silicon-on-insulator accelerometers," J. Micromech. Microeng., Vol. 15, pp. 2113-2120, 2005.
49. Garcia, E. J. and Sniegowski, J. J., "Surface micromachined microengine," Sensor Acutat. A: Physical, Vol. 48, pp. 203-214, 1995.
50. Kolesar, E. S., Odom, W. E., Jayachandran, J. A., Ruff, M. D., Ko, S. Y., Howard, J. T., Allen, P. B., Wilken, J. M., Boydston, N. C., Bosch, J. E., Wilks, R. J., and McAllister, J. B., "Design and performance of an electrothermal MEMS microengine capable of bi-directional motion," Thin Solid Films, Vol. 447-448, pp. 481-488, 2004.
51. MEMS Market Tracker, 2011, www.iSuppli.com.
52. Zhao, Y. P. and Yu, T. X., "Failure modes of MEMS and microscale adhesive contact theory," Int. J. Nonlin. Sci. Num., Vol. 1, pp. 361-371, 2000.
53. Spengen, W. M. V., "MEMS reliability from a failure mechanisms perspective," Microelectron. Reliab., Vol. 43, pp. 1049-1060, 2003.
54. Komvopoulos, K., "Surface engineering and microtribology for microelectromechanical systems," Wear, Vol. 200, pp. 305-327, 1996.
55. Miller, S. L., LaVigne, G., Rodgers, M. S., Sniegowski, J. J., Waters, J. P., and McWorther, P. J., "Routes to failure in rotating MEMS devices experiencing sliding friction," Proc. SPIE, Vol. 3224, pp. 24-30, 1997.
56. Miller, S. L., Rodgers, M. S., LaVigne, G., Sniegowski, J. J., Clews, P., and Tanner, D. M., "Failure modes in surface micromachined microelectromechanical actuators," Proc. IRPS Annu. Conf., 1998.
57. Tanner, D. M., Miller, W. M., Eaton, W. P., and Irwin, L. W., "The effect of frequency on the lifetime of a surface micromachined microengine driving a load," Proc. IRPS Annu. Conf., 1998.
58. Tanner, D. M., Peterson, K. A., Irwin, L. W, Tanyunyong, P., Miller, W. M., Eaton, W. P., Smith, N. F., and Rodgers, M. S., "Linkage design effect on the reliability of surface micromachined microengines driving a load," Proc. SPIE, Vol. 3512, pp. 215-226, 1998.
59. Tanner, D. M., Smith, N. F., Bowman, D. J., Eaton, W. P., and Peterson, K. A., "First reliability test of a surface micromachined microengine using SHiMMeR," Proc. SPIE, Vol. 3224, pp. 14-23, 1997.
60. Chllins, J. A., "Failure of materials in mechanical design: analysis, prediction, prevention," John Wiley & Sons, 1993.
61. Tanner, D. M., Walraven, J. A., Barnes, S. M., Smith, N. F., Bitsie, F., and Swanson, S. E., "Reliability of a MEMS torsional ratcheting actuator," Proc. IRPS Annu. Conf., pp. 81-91, 2001.
62. Hsu, T. R., "MEMS and microsystems: design, manufacture, and nanoscale engineering," John Wiley & Sons, 2008.
63. Beerschwinger, U., Mathieson, D., Rueben, R. L., and Yang, S. J., "A study of wear on MEMS contact morphologies," J. Micromech. Microeng., Vol. 4, pp. 95-105, 1994.
64. Chung, K. H., Jang, C. E., and Kim, D. E., "Wear characteristics of microscopic bushing for MEMS applications investigated by an AFM," J. Micromech. Microeng., Vol. 17, pp. 1877-1887, 2007.
65. Kim, H. J. and Kim, D. E., "Molecular dynamics simulation of atomic-scale frictional behavior of corrugated nano-structured surfaces," Nanoscale, Vol. 4, pp. 3937-3944, 2012.
66. Kim, H. J. and Kim, D. E., "MD Simulation of the frictional behavior of CNTs with respect to orientation," Tribol. Int., Vol. 50, pp. 51-56, 2012.
67. Jeng, Y. R., Tsai, P. C., and Fang, T. H., "Molecular dynamics of atomic-scale tribological characteristics for different sliding systems," Tribol. Lett., Vol. 18, No. 3, pp. 315-330, 2005.
68. Zhong, J. and Adams, J., "Molecular dynamics simulations of asperity shear in aluminum," J. of Appl. Phys., Vol. 94, No. 7, pp. 4306-4314, 2003.
69. Cheng, K., Luo, X., Ward, R., and Holt, R., "Modeling and simulation of the tool wear in nanometric cutting," Wear, Vol. 255, pp. 1427-1432, 2003.
70. Tang, Q. and Chen, F., "MD simulation of phase transformations due to nanoscale cutting on silicon monocrystals with diamond tip," J. Appl. Phys., Vol. 39, pp. 3674-3679, 2006.
71. Varenberg, M., Etsion, I., and Halperin, G., "Nanoscale fretting wear study by scanning probe microscopy," Tribol. Lett., Vol. 18, No. 4, pp. 493-498, 2005.
72. Chung, K. H., Lee, Y. H., Kim, Y. T., Kim, D. E., Yoo, J., and Hong, S., "Nano-tribological characteristics of PZT thin film investigated by atomic force microscopy," Surf. & Coat. Tech., Vol. 201, pp. 7983-7991, 2007.
73. Chung, K. H., Kim, H. J., Lin, L. Y., and Kim, D. E., "Tribologcial characteristics of ZnO nanowires investigated by atomic force microscope," Appl. Phys. A, Vol. 92, pp. 267-274, 2008.