Current ceramic materials and systems with clinical recommendations: A systematic review

Journal of Prosthetic Dentistry

Volumn 98, Issue 5, 2007, Pages 389-404

  Conrad, Heather J ^a   Seong, Wook Jin ^a   Pesun, Igor J ^b  

^a UNIVERSITY OF MINNESOTA   (United States)

^b UNIVERSITY OF MANITOBA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 36148962932     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(07)60124-3     Document Type: Article

References (165)

1. Land C. Porcelain dental art: No. II. Dent Cosmos 45 (1903) 615-620
2. McLean J., and Hughes T. The reinforcement of dental porcelain with ceramic oxides. Br Dent J 119 (1965) 251-267
3. Sjogren G., Lantto R., Granberg A., Sundstrom B., and Tillberg A. Clinical examination of leucite-reinforced glass-ceramic crowns (Empress) in general practice: a retrospective study. Int J Prosthodont 12 (1999) 122-128
4. Piconi C., and Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 20 (1999) 1-25
5. Christel P., Meunier A., Dorlot J., Crolet J., Witvoet J., Sedel L., et al. Biomechanical compatibility and design of ceramic implants for orthopedic surgery. Ann N Y Acad Sci 523 (1988) 234-256
6. Piwowarczyk A., Ottl P., Lauer H., and Kuretzky T. A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava All-Ceramic System. J Prosthodont 14 (2005) 39-45
7. Raigrodski A. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 92 (2004) 557-562
8. Raigrodski A. Contemporary all-ceramic fixed partial dentures: a review. Dent Clin North Am 48 (2004) 531-544
9. Devigus A., and Lombardi G. Shading Vita YZ substructures: influence on value and chroma, part I. Int J Comput Dent 7 (2004) 293-301
10. Heffernan M., Aquilino S., Diaz-Arnold A., Haselton D., Stanford C., and Vargas M. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 88 (2002) 4-9
11. Fischer H., and Marx R. Fracture toughness of dental ceramics: comparison of bending and indentation method. Dent Mater 18 (2002) 12-19
12. Edelhoff D., and Sorensen J. Tooth structure removal associated with various preparation designs for posterior teeth. Int J Periodontics Restorative Dent 22 (2002) 241-249
13. Aboushelib M., de Jager N., Kleverlaan C., and Feilzer A. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 21 (2005) 984-991
14. Fradeani M., D'Amelio M., Redemagni M., and Corrado M. Five-year follow-up with Procera all-ceramic crowns. Quintessence Int 36 (2005) 105-113
15. Oden A., Andersson M., Krystek-Ondracek I., and Magnusson D. Five-year clinical evaluation of Procera AllCeram crowns. J Prosthet Dent 80 (1998) 450-456
16. Odman P., and Andersson B. Procera AllCeram crowns followed for 5 to 10.5 years: a prospective clinical study. Int J Prosthodont 14 (2001) 504-509
17. Wolfart S., Bohlsen F., Wegner S., and Kern M. A preliminary prospective evaluation of all-ceramic crown-retained and inlay-retained fixed partial dentures. Int J Prosthodont 18 (2005) 497-505
18. Frankenberger R., Petschelt A., and Kramer N. Leucite-reinforced glass ceramic inlays and onlays after six years: clinical behavior. Oper Dent 25 (2000) 459-465
19. Fradeani M., and Redemagni M. An 11-year clinical evaluation of leucite-reinforced glass-ceramic crowns: a retrospective study. Quintessence Int 33 (2002) 503-510
20. Marquardt P., and Strub J. Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study. Quintessence Int 37 (2006) 253-259
21. Esquivel-Upshaw J., Anusavice K., Young H., Jones J., and Gibbs C. Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs. Int J Prosthodont 17 (2004) 469-475
22. Bindl A., and Mormann W. An up to 5-year clinical evaluation of posterior In-Ceram CAD/CAM core crowns. Int J Prosthodont 15 (2002) 451-456
23. McLaren E., and White S. Survival of In-Ceram crowns in a private practice: a prospective clinical trial. J Prosthet Dent 83 (2000) 216-222
24. Vult von Steyern P., Jonsson O., and Nilner K. Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs. Int J Prosthodont 14 (2001) 379-384
25. Olsson K., Furst B., Andersson B., and Carlsson G. A long-term retrospective and clinical follow-up study of In-Ceram Alumina FPDs. Int J Prosthodont 16 (2003) 150-156
26. Sorensen J., Kang S., Torres T., and Knode H. In-Ceram fixed partial dentures: three-year clinical trial results. J Calif Dent Assoc 26 (1998) 207-214
27. Fradeani M., Aquilano A., and Corrado M. Clinical experience with In-Ceram Spinell crowns: 5-year follow-up. Int J Periodontics Restorative Dent 22 (2002) 525-533
28. Pallesen U., and van Dijken J. An 8-year evaluation of sintered ceramic and glass ceramic inlays processed by the Cerec CAD/CAM system. Eur J Oral Sci 108 (2000) 239-246
29. Otto T., and De Nisco S. Computer-aided direct ceramic restorations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays. Int J Prosthodont 15 (2002) 122-128
30. Malament K., and Socransky S. Survival of Dicor glass-ceramic dental restorations over 14 years: Part I. Survival of Dicor complete coverage restorations and effect of internal surface acid etching, tooth position, gender, and age. J Prosthet Dent 81 (1999) 23-32
31. Kim J., Bhowmick S., Hermann I., and Lawn B. Transverse fracture of brittle bilayers: relevance to failure of all-ceramic dental crowns. J Biomed Mater Res B Appl Biomater 79 (2006) 58-65
32. Kosmac T., Oblak C., Jevnikar P., Funduk N., and Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 15 (1999) 426-433
33. Luthardt R., Sandkuhl O., and Reitz B. Zirconia-TZP and alumina-advanced technologies for the manufacturing of single crowns. Eur J Prosthodont Restor Dent 7 (1999) 113-119
34. Reichel K. Virtual Reality by Cerec inLab Framework. Int J Comput Dent 7 (2004) 85-95
35. Kamposiora P., Papavasiliou G., Bayne S., and Felton D. Stress concentration in all-ceramic posterior fixed partial dentures. Quintessence Int 27 (1996) 701-706
36. Raigrodski A., and Chiche G. The safety and efficacy of anterior ceramic fixed partial dentures: A review of the literature. J Prosthet Dent 86 (2001) 520-525
37. Raigrodski A., Chiche G., Potiket N., Hochstedler J., Mohamed S., Billiot S., et al. The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 96 (2006) 237-244
38. Vult von Steyern P., Carlson P., and Nilner K. All-ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study. J Oral Rehabil 32 (2005) 180-187
39. Walton T. An up to 15-year longitudinal study of 515 metal-ceramic FPDs: Part 2. Modes of failure and influence of various clinical characteristics. Int J Prosthodont 16 (2003) 177-182
40. Goodacre C., Bernal G., Rungcharassaeng K., and Kan J. Clinical complications in fixed prosthodontics. J Prosthet Dent 90 (2003) 31-41
41. Miller L. Framework design in ceramo-metal restorations. Dent Clin North Am 21 (1977) 699-716
42. Oh S., Dong J., Luthy H., and Scharer P. Strength and microstructure of IPS Empress 2 glass-ceramic after different treatments. Int J Prosthodont 13 (2000) 468-472
43. Nakamura T., Ohyama T., Imanishi A., Nakamura T., and Ishigaki S. Fracture resistance of pressable glass-ceramic fixed partial dentures. J Oral Rehabil 29 (2002) 951-955
44. Holand W., Schweiger M., Frank M., and Rheinberger V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J Biomed Mater Res 53 (2000) 297-303
45. Esquivel-Upshaw J., Chai J., Sansano S., and Shonberg D. Resistance to staining, flexural strength, and chemical solubility of core porcelains for all-ceramic crowns. Int J Prosthodont 14 (2001) 284-288
46. Tinschert J., Natt G., Mautsch W., Augthun M., and Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 14 (2001) 231-238
47. Raptis N., Michalakis K., and Hirayama H. Optical behavior of current ceramic systems. Int J Periodontics Restorative Dent 26 (2006) 31-41
48. Stappert C., Att W., Gerds T., and Strub J. Fracture resistance of different partial-coverage ceramic molar restorations: An in vitro investigation. J Am Dent Assoc 137 (2006) 514-522
49. Fasbinder D. Restorative material options for CAD/CAM restorations. Compend Contin Educ Dent 23 (2002) 911-916 918.
50. Attia A., and Kern M. Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems. J Prosthet Dent 92 (2004) 551-556
51. Reich S., Troeltzsch M., Denekas T., and Wichmann M. Generation of functional Cerec 3D occlusal surfaces: a comparison of two production methods relevant in practice. Int J Comput Dent 7 (2004) 229-238
52. Bindl A., Luthy H., and Mormann W. Fracture load of CAD/CAM-generated slot-inlay FPDs. Int J Prosthodont 16 (2003) 653-660
53. Otto T. Computer-aided direct all-ceramic crowns: preliminary 1-year results of a prospective clinical study. Int J Periodontics Restorative Dent 24 (2004) 446-455
54. Denissen H., Dozic A., van der Zel J., and van Waas M. Marginal fit and short-term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays. J Prosthet Dent 84 (2000) 506-513
55. Reich S., Wichmann M., Rinne H., and Shortall A. Clinical performance of large, all-ceramic CAD/CAM-generated restorations after three years: a pilot study. J Am Dent Assoc 135 (2004) 605-612
56. Attia A., and Kern M. Fracture strength of all-ceramic crowns luted using two bonding methods. J Prosthet Dent 91 (2004) 247-252
57. Bindl A., and Mormann W. Survival rate of mono-ceramic and ceramic-core CAD/CAM-generated anterior crowns over 2-5 years. Eur J Oral Sci 112 (2004) 197-204
58. Reich S., and Hornberger H. The effect of multicolored machinable ceramics on the esthetics of all-ceramic crowns. J Prosthet Dent 88 (2002) 44-49
59. Kurbad A., and Reichel K. Multicolored ceramic blocks as an esthetic solution for anterior restorations. Int J Comput Dent 9 (2006) 69-82
60. Fritzsche G. Treatment of a single-tooth gap with a Cerec 3D crown on an implant: A case report. Int J Comput Dent 7 (2004) 199-206
61. Sevuk C., Gur H., and Akkayan B. Copy-milled all-ceramic restorations: case reports. Quintessence Int 33 (2002) 353-357
62. Sevuk C., Gur H., and Akkayan B. Fabrication of one-piece all-ceramic coronal post and laminate veneer restoration: a clinical report. J Prosthet Dent 88 (2002) 565-568
63. Chai J., Takahashi Y., Sulaiman F., Chong K., and Lautenschlager E. Probability of fracture of all-ceramic crowns. Int J Prosthodont 13 (2000) 420-424
64. Chang J., Hart D., Estey A., and Chan J. Tensile bond strengths of five luting agents to two CAD-CAM restorative materials and enamel. J Prosthet Dent 90 (2003) 18-23
65. Malament K., and Socransky S. Survival of Dicor glass-ceramic dental restorations over 14 years. Part II: effect of thickness of Dicor material and design of tooth preparation. J Prosthet Dent 81 (1999) 662-667
66. Haselton D., Diaz-Arnold A., and Hillis S. Clinical assessment of high-strength all-ceramic crowns. J Prosthet Dent 83 (2000) 396-401
67. Sundh A., and Sjogren G. A comparison of fracture strength of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil 31 (2004) 682-688
68. Xiao-ping L., Jie-mo T., Yun-long Z., and Ling W. Strength and fracture toughness of MgO-modified glass infiltrated alumina for CAD/CAM. Dent Mater 18 (2002) 216-220
69. Heffernan M., Aquilino S., Diaz-Arnold A., Haselton D., Stanford C., and Vargas M. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 88 (2002) 10-15
70. Magne P., and Belser U. Esthetic improvements and in vitro testing of In-Ceram Alumina and Spinell ceramic. Int J Prosthodont 10 (1997) 459-466
71. Dozic A., Kleverlaan C., Meegdes M., van der Zel J., and Feilzer A. The influence of porcelain layer thickness on the final shade of ceramic restorations. J Prosthet Dent 90 (2003) 563-570
72. De Jager N., Pallav P., and Feilzer A. The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns. Dent Mater 21 (2005) 242-251
73. van der Zel J., Vlaar S., de Ruiter W., and Davidson C. The CICERO system for CAD/CAM fabrication of full-ceramic crowns. J Prosthet Dent 85 (2001) 261-267
74. Bindl A., and Mormann W. Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations. J Oral Rehabil 32 (2005) 441-447
75. Andersson M., and Oden A. A new all-ceramic crown. A dense-sintered, high-purity alumina coping with porcelain. Acta Odontol Scand 51 (1993) 59-64
76. May K., Russell M., Razzoog M., and Lang B. Precision of fit: the Procera AllCeram crown. J Prosthet Dent 80 (1998) 394-404
77. Garvie R., Hannink R., and Pascoe R. Ceramic steel?. Nature 258 (1975) 703-704
78. Garvie R., and Nicholson P. Phase analysis in zirconia systems. J Am Ceram Soc 55 (1972) 303-305
79. Kohal R., and Klaus G. A zirconia implant-crown system: a case report. Int J Periodontics Restorative Dent 24 (2004) 147-153
80. Sundh A., Molin M., and Sjogren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater 21 (2005) 476-482
81. Luthardt R., Holzhuter M., Sandkuhl O., Herold V., Schnapp J., Kuhlisch E., et al. Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 81 (2002) 487-491
82. Luthardt R., Holzhuter M., Rudolph H., Herold V., and Walter M. CAD/CAM-machining effects on Y-TZP zirconia. Dent Mater 20 (2004) 655-662
83. Tinschert J., Natt G., Mautsch W., Spiekermann H., and Anusavice K. Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent 26 (2001) 367-374
84. Guazzato M., Proos K., Quach L., and Swain M. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 25 (2004) 5045-5052
85. Addi S., Hedayati-Khams A., Poya A., and Sjogren G. Interface gap size of manually and CAD/CAM-manufactured ceramic inlays/onlays in vitro. J Dent 30 (2002) 53-58
86. Coli P., and Karlsson S. Fit of a new pressure-sintered zirconium dioxide coping. Int J Prosthodont 17 (2004) 59-64
87. Butz F., Heydecke G., Okutan M., and Strub J. Survival rate, fracture strength and failure mode of ceramic implant abutments after chewing simulation. J Oral Rehabil 32 (2005) 838-843
88. Henriksson K., and Jemt T. Evaluation of custom-made procera ceramic abutments for single-implant tooth replacement: a prospective 1-year follow-up study. Int J Prosthodont 16 (2003) 626-630
89. Priest G. Virtual-designed and computer-milled implant abutments. J Oral Maxillofac Surg 63 (2005) 22-32
90. Heydecke G., Sierraalta M., and Razzoog M. Evolution and use of aluminum oxide single-tooth implant abutments: a short review and presentation of two cases. Int J Prosthodont 15 (2002) 488-493
91. Suarez M., Lozano J., Paz Salido M., and Martinez F. Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs. Int J Prosthodont 17 (2004) 35-38
92. Probster L. Four year clinical study of glass-infiltrated, sintered alumina crowns. J Oral Rehabil 23 (1996) 147-151
93. Scurria M., Bader J., and Shugars D. Meta-analysis of fixed partial denture survival: prostheses and abutments. J Prosthet Dent 79 (1998) 459-464
94. Esquivel-Upshaw J., and Anusavice K. Ceramic design concepts based on stress distribution analysis. Compend Contin Educ Dent 21 (2000) 649-652 654.
95. Scherrer S., and de Rijk W. The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont 6 (1993) 462-467
96. Meyer Jr. A., Cardoso L., Araujo E., and Baratieri L. Ceramic inlays and onlays: clinical procedures for predictable results. J Esthet Restor Dent 15 (2003) 338-351
97. Wen M., Mueller H., Chai J., and Wozniak W. Comparative mechanical property characterization of 3 all-ceramic core materials. Int J Prosthodont 12 (1999) 534-541
98. Lohbauer U., Petschelt A., and Greil P. Lifetime prediction of CAD/CAM dental ceramics. J Biomed Mater Res 63 (2002) 780-785
99. Seghi R., Denry I., and Rosenstiel S. Relative fracture toughness and hardness of new dental ceramics. J Prosthet Dent 74 (1995) 145-150
100. Hwang J., and Yang J. Fracture strength of copy-milled and conventional In-Ceram crowns. J Oral Rehabil 28 (2001) 678-683
101. Guazzato M., Albakry M., Swain M., and Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. Int J Prosthodont 15 (2002) 339-346
102. Chong K., Chai J., Takahashi Y., and Wozniak W. Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials. Int J Prosthodont 15 (2002) 183-188
103. Zeng K., Oden A., and Rowcliffe D. Evaluation of mechanical properties of dental ceramic core materials in combination with porcelains. Int J Prosthodont 11 (1998) 183-189
104. Wakabayashi N., and Anusavice K. Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness. J Dent Res 79 (2000) 1398-1404
105. Proos K., Swain M., Ironside J., and Steven G. Influence of core thickness on a restored crown of a first premolar using finite element analysis. Int J Prosthodont 16 (2003) 474-480
106. Studart A., Filser F., Kocher P., Luthy H., and Gauckler L. Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges. Dent Mater 23 (2007) 115-123
107. Taskonak B., Mecholsky Jr. J., and Anusavice K. Residual stresses in bilayer dental ceramics. Biomaterials 26 (2005) 3235-3241
108. Studart A., Filser F., Kocher P., Luthy H., and Gauckler L. Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges. Dent Mater 23 (2007) 177-185
109. Oh W., Gotzen N., and Anusavice K. Influence of connector design on fracture probability of ceramic fixed-partial dentures. J Dent Res 81 (2002) 623-627
110. Oh W., and Anusavice K. Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures. J Prosthet Dent 87 (2002) 536-542
111. Oilo G., Tornquist A., Durling D., and Andersson M. All-ceramic crowns and preparation characteristics: a mathematic approach. Int J Prosthodont 16 (2003) 301-306
112. Pospiech P., Rammelsberg P., Goldhofer G., and Gernet W. All-ceramic resin-bonded bridges. A 3-dimensional finite-element analysis study. Eur J Oral Sci 104 (1996) 390-395
113. DeLong R., and Douglas W. Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control. J Dent Res 62 (1983) 32-36
114. Strub J., and Beschnidt S. Fracture strength of 5 different all-ceramic crown systems. Int J Prosthodont 11 (1998) 602-609
115. Christensen G. Marginal fit of gold inlay castings. J Prosthet Dent 16 (1966) 297-305
116. McLean J., and von Fraunhofer J. The estimation of cement film thickness by an in vivo technique. Br Dent J 131 (1971) 107-111
117. Holmes J., Bayne S., Holland G., and Sulik W. Considerations in measurement of marginal fit. J Prosthet Dent 62 (1989) 405-408
118. Knoernschild K., and Campbell S. Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures. J Prosthet Dent 84 (2000) 492-498
119. Martin N., and Jedynakiewicz N. Interface dimensions of CEREC-2 MOD inlays. Dent Mater 16 (2000) 68-74
120. Reich S., Wichmann M., Nkenke E., and Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures generated with three different CAD/CAM systems. Eur J Oral Sci 113 (2005) 174-179
121. Lin M., Sy-Munoz J., Munoz C., Goodacre C., and Naylor W. The effect of tooth preparation form on the fit of Procera copings. Int J Prosthodont 11 (1998) 580-590
122. Molin M., and Karlsson S. The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study. Acta Odontol Scand 51 (1993) 201-206
123. Luthardt R., Bornemann G., Lemelson S., Walter M., and Huls A. An innovative method for evaluation of the 3-D internal fit of CAD/CAM crowns fabricated after direct optical versus indirect laser scan digitizing. Int J Prosthodont 17 (2004) 680-685
124. Nakamura T., Dei N., Kojima T., and Wakabayashi K. Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int J Prosthodont 16 (2003) 244-248
125. Sato K., Matsumura H., and Atsuta M. Relation between cavity design and marginal adaptation in a machine-milled ceramic restorative system. J Oral Rehabil 29 (2002) 24-27
126. Mou S., Chai T., Wang J., and Shiau Y. Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns. J Prosthet Dent 87 (2002) 248-255
127. Balkaya M., Cinar A., and Pamuk S. Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems. J Prosthet Dent 93 (2005) 346-355
128. Reich S., Peltz I., Wichmann M., and Estafan D. A comparative study of two CEREC software systems in evaluating manufacturing time and accuracy of restorations. Gen Dent 53 (2005) 195-198
129. Boening K., Wolf B., Schmidt A., Kastner K., and Walter M. Clinical fit of Procera AllCeram crowns. J Prosthet Dent 84 (2000) 419-424
130. Fleming G., and Narayan O. The effect of cement type and mixing on the bi-axial fracture strength of cemented aluminous core porcelain discs. Dent Mater 19 (2003) 69-76
131. Knobloch L., Kerby R., Seghi R., Berlin J., and Lee J. Fracture toughness of resin-based luting cements. J Prosthet Dent 83 (2000) 204-209
132. Diaz-Arnold A., Vargas M., and Haselton D. Current status of luting agents for fixed prosthodontics. J Prosthet Dent 81 (1999) 135-141
133. Chen J., Matsumura H., and Atsuta M. Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. J Dent 26 (1998) 53-58
134. Kamada K., Yoshida K., and Atsuta M. Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent 79 (1998) 508-513
135. Ahmad I. Restitution of maxillary anterior aesthetics with all-ceramic components. Int Dent J 52 (2002) 47-56
136. Jedynakiewicz N., and Martin N. The effect of surface coating on the bond strength of machinable ceramics. Biomaterials 22 (2001) 749-752
137. Kern M., and Thompson V. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent 71 (1994) 453-461
138. Bindl A., Richter B., and Mormann W. Survival of ceramic computer-aided design/manufacturing crowns bonded to preparations with reduced macroretention geometry. Int J Prosthodont 18 (2005) 219-224
139. Scherrer S., De Rijk W., and Belser U. Fracture resistance of human enamel and three all-ceramic crown systems on extracted teeth. Int J Prosthodont 9 (1996) 580-585
140. Bindl A., Luthy H., and Mormann W. Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dent Mater 22 (2006) 29-36
141. Attia A., Abdelaziz K., Freitag S., and Kern M. Fracture load of composite resin and feldspathic all-ceramic CAD/CAM crowns. J Prosthet Dent 95 (2006) 117-123
142. Albert F., and El-Mowafy O. Marginal adaptation and microleakage of Procera AllCeram crowns with four cements. Int J Prosthodont 17 (2004) 529-535
143. Federlin M., Sipos C., Hiller K., Thonemann B., and Schmalz G. Partial ceramic crowns. Influence of preparation design and luting material on margin integrity-a scanning electron microscopic study. Clin Oral Investig 9 (2005) 8-17
144. Sjogren G., Molin M., and van Dijken J. A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite. Int J Prosthodont 17 (2004) 241-246
145. Sjogren G., Molin M., and van Dijken J. A 5-year clinical evaluation of ceramic inlays (Cerec) cemented with a dual-cured or chemically cured resin composite luting agent. Acta Odontol Scand 56 (1998) 263-267
146. Hasegawa E., Boyer D., and Chan D. Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent 66 (1991) 187-192
147. Peutzfeldt A. Dual-cure resin cements: in vitro wear and effect of quantity of remaining double bonds, filler volume, and light curing. Acta Odontol Scand 53 (1995) 29-34
148. Lee I., and Um C. Thermal analysis on the cure speed of dual cured resin cements under porcelain inlays. J Oral Rehabil 28 (2001) 186-197
149. Tanoue N., Koishi Y., Atsuta M., and Matsumura H. Properties of dual-curable luting composites polymerized with single and dual curing modes. J Oral Rehabil 30 (2003) 1015-1021
150. Shimura R., Nikaido T., Yamauti M., Ikeda M., and Tagami J. Influence of curing method and storage condition on microhardness of dual-cure resin cements. Dent Mater J 24 (2005) 70-75
151. Peumans M., Van Meerbeek B., Lambrechts P., and Vanherle G. Porcelain veneers: a review of the literature. J Dent 28 (2000) 163-177
152. Federlin M., Schmidt S., Hiller K., Thonemann B., and Schmalz G. Partial ceramic crowns: influence of preparation design and luting material on internal adaptation. Oper Dent 29 (2004) 560-570
153. Ferrari M., Cagidiaco M., Vichi A., Mannocci F., Mason P., and Mjor I. Bonding of all-porcelain crowns: structural characteristics of the substrate. Dent Mater 17 (2001) 156-164
154. Ibarra G., Johnson G., Geurtsen W., and Vargas M. Microleakage of porcelain veneer restorations bonded to enamel and dentin with a new self-adhesive resin-based dental cement. Dent Mater 23 (2007) 218-225
155. Awliya W., Oden A., Yaman P., Dennison J., and Razzoog M. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol Scand 56 (1998) 9-13
156. Kern M., and Strub J. Bonding to alumina ceramic in restorative dentistry: clinical results over up to 5 years. J Dent 26 (1998) 245-249
157. Derand P., and Derand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 13 (2000) 131-135
158. Kern M., and Wegner S. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 (1998) 64-71
159. Ernst C., Cohnen U., Stender E., and Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 93 (2005) 551-558
160. Zhang Y., Lawn B., Malament K., Van Thompson P., and Rekow E. Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont 19 (2006) 442-448
161. Zhang Y., Lawn B., Rekow E., and Thompson V. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater 71 (2004) 381-386
162. Palacios R., Johnson G., Phillips K., and Raigrodski A. Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent 96 (2006) 104-114
163. Herrguth M., Wichmann M., and Reich S. The aesthetics of all-ceramic veneered and monolithic CAD/CAM crowns. J Oral Rehabil 32 (2005) 747-752
164. Douglas R., and Przybylska M. Predicting porcelain thickness required for dental shade matches. J Prosthet Dent 82 (1999) 143-149
165. Vichi A., Ferrari M., and Davidson C. Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent 83 (2000) 412-417