A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava™ all-ceramic system

Journal of Prosthodontics

Volumn 14, Issue 1, 2005, Pages 39-45

  Piwowarczyk, Andree ^a   Ottl, Peter ^a   Lauer, Hans Christoph ^a   Kuretzky, Timo ^b  

^a GOETHE UNIVERSITY   (Germany)

^b 3M Deutschland GmbH   (Germany)

Author keywords

All ceramic restorations; CAD CAM technology; Zirconia

Indexed keywords

Y TZP CERAMIC; Y-TZP CERAMIC; YTTRIUM; ZIRCONIUM;

ARTICLE; CASE REPORT; COMPUTER AIDED DESIGN; DENTURE; HUMAN; MATERIALS TESTING; TOOTH CROWN; TOOTH PROSTHESIS;

COMPUTER-AIDED DESIGN; CROWNS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTURE, PARTIAL, FIXED; HUMANS; MATERIALS TESTING; YTTRIUM; ZIRCONIUM;

EID: 21244506130     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2005.00003.x     Document Type: Article

References (35)

1. Cales B: Zirconia as a sliding material: histologic, laboratory, and clinical data. Clin Orthop 2000;379:94-112.
2. Cales B, Stefani Y, Lilley E: Long-term in vivo and in vitro aging of a zirconia ceramic used in orthopaedy. J Biomed Mater Res 1994;28:619-624.
3. Keith O, Kusy RP, Whitley JQ: Zirconia brackets: an evaluation of morphology and coefficients of friction. Am J Orthod Dentofacial Orthop 1994;106:605-614.
4. Strub JR, Pontius O, Koutayas S: Survival rate and fracture strength of incisors restored with different post and core systems after exposure in the artificial mouth. J Oral Rehabil 2001;28:120-124.
5. Kern M, Simon MHP, Strub JR: Clinical evaluation of all-ceramic zirconia posts. A pilot study. J Dent Res 1997;76:293 (abstract 2234).
6. Meyenberg KH, Lüthy H, Schärer P: Zirconia posts: a new all-ceramic concept for nonvital abutment teeth. J Esthet Dent 1995;7:73-80.
7. Ottl P, Hahn L, Laurer HCH, et al: Fracture characteristics of carbon fibre, ceramic and non-palladium endodontic post system at monotonously increasing loads. J Oral Rehabil 2000;29:175-183.
8. Akagawa Y, Ichikawa Y, Nikai H, et al: Interface histology of unloaded and early loaded partially stabilized zirconia endosseous implant in initial bone healing. J Prosthet Dent 1993;69:599-604.
9. Prestipino V, Ingber A: Esthetic high-strength implant abutments. Part I. J Esthet Dent 1993;5:29-36.
10. Filser F, Eglin M, Lüthy H, et al: FEA study of DCM machined zirconia vs Vita-Celay In-ceram bridges. J Dent Res 1999;78:204 (abstract 792).
11. Lüthy H, Filser F, Gauckler L, et al: Reliability of DCM machined zirconia bridges: comparison for different interdental connector areas. J Dent Res 1999;78:205 (abstract 793).
12. Green DJ, Hannink RHJ, Swain MV: Transformation Toughening of Ceramics. Boca Raton, CRC Press, 1989, pp 137-144.
13. Rieger W: Medical applications of ceramics. In Kostorz G: High-Tech Ceramics. London, Academic Press, 1989, pp 191-228.
14. Yanagida H, Komoto K, Miyayama M: The Chemistry of Ceramics. Chichester, NY, Wiley, 1996, pp 247-249.
15. Marx R: Moderne keramische Werkstoffe für ästhetische Restaurationen - Verstärkung und Bruchzähigkeit [Modern ceramic materials for aesthetic restorations - strengthening and tensile strength.] Dtsch Zahnärztl Z 1993;48:229-236.
16. Takagi H, Nishioka K, Kawanami T, et al: The properties of a closely sintered zirconia. Ceram Forum Int 1985;62:195-198.
17. Tinschert J, Zwez D, Marx R, et al: Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 2000;28:529-535.
18. Christel P, Meunier A, Heller M, et al: Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989;23:45-61.
19. Kosmač T, Oblak C, Jevnikar P, et al: Strength and relia-bility of surface treated Y-TZP dental ceramics. J Biomed Mater Res 2000;53:304-313.
20. 2-TZP and In-Ceram.] Dtsch Zahnärztl Z 1999;54:692-694.
21. Jung YG, Peterson IM, Kim DK, et al: Lifetime-limiting strength degradation from contact fatigue in dental ceramics. J Dent Res 2000;79:722-731.
22. Guiberteau F, Padture NP, Cai H, et al: Indentation fatigue: a simple cyclic Hertzian test for measuring damage accumulation in polycrystalline ceramics. Phil Mag 1993;68:1003-1016.
23. Shimizu K, Oka M, Kumar P, et al: Time-dependent changes in the mechanical properties of zirconia ceramic. J Biomed Mater Res 1993;27:729-734.
24. Ichikawa Y, Akagawa Y, Nikai H, et al: Tissue compatibility and stability of a new zirconia ceramic in vivo. J Prosthet Dent 1992;68:322-326.
25. 2-ceramics. J Dent Res 2001;80:57 (abstract 173).
26. Rosentritt M, Behr M, Lang R, et al: Fracture strength of tooth colored posterior fixed partial dentures. J Dent Res 2001;80:57 (abstract 174).
27. Tinschert J, Natt G, Jorewitz A, et al: Belastbarkeit vollkeramischer Seitenzahnbrücken aus neuen Hartkernkeramiken. [Fracture strength of all-ceramic fixed partial dentures.] Dtsch Zahnärzt! Z 2000;55:610-616.
28. Hertlein G, Höscheler S, Frank S, et al: Marginal Fit of CAD/CAM manufactured all ceramic zirconia prostheses. J Dent Res 2001;80:42 (abstract 049).
29. Holmes JR, Bayne SC, Holland GA, et al: Considerations in measurement of marginal fit. J Prosthet Dent 1989;62:405-408.
30. Yeo IS, Yang JH, Lee JB: In vitro marginal fit of three all-ceramic crown systems. J Prosthet Dent 2003;90:459-464.
31. Körber KH, Ludwig K: Maximale Kaukraft als Berechnungsfaktor zahntechnischer Konstruktionen. [Maximum mastication force as a calculatory factor in dental constructions.] Dent Lab 1983;83:55-60.
32. Tinschert J, Natt G, Doose B, et al: Seitenzahnbrücken aus hochfester Strukturkeramik. [High performance ceramic posterior bridges.] Dtsch Zahnärztl Z 1999;54:545-550.
33. Kelly JR, Tesk JA, Sorensen JA: Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res 1995;74:1253-1258.
34. Sturzenegger B, Feher A, Lüthy H, et al: Klinische Studie von Zirkonoxidbrücken im Seitenzahnbereich mit dem DCM-System. [Clinical study of zirconia bridges in posterior areas using the DCM system] Acta Med Dent Helv 2000;5:131-139.
35. Filser F, Kocher P, Weibel F, et al: Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM). Int J Comput Dent 2001;4:89-106.