Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing

Dental Materials

Volumn 21, Issue 5, 2005, Pages 476-482

  Sundh, Anders ^a,b,c   Molin, Margareta ^a   Sjögren, Göran ^a  

^a UMEÅ UNIVERSITY   (Sweden)

^b National Dental Health Service   (Sweden)

^c Cadesthetics AB   (Sweden)

Author keywords

All ceramic bridges; Dental ceramics; FPDs; Fracture load; Y TZP

Indexed keywords

CERAMIC MATERIALS; DENTAL MATERIALS; DYNAMIC LOADS; FATIGUE TESTING; FRACTURE; HEAT TREATMENT; MACHINING; YTTRIUM COMPOUNDS;

ALL-CERAMIC BRIDGES; DENTAL CERAMICS; FPD; FRACTURE LOADS; Y-TZP;

ZIRCONIA;

ERIS CERAMIC; VITA VENEERING CERAMIC D; YTTRIA STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIUM;

ARTICLE; CERAMICS; COMPUTER AIDED DESIGN; DENTAL CARE; DENTAL SURGERY; DENTURE; HEAT; NONPARAMETRIC TEST; TOOTH PROSTHESIS;

CERAMICS; COMPUTER-AIDED DESIGN; DENTAL PORCELAIN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTAL VENEERS; DENTURE DESIGN; DENTURE, PARTIAL, FIXED; HEAT; STATISTICS, NONPARAMETRIC; YTTRIUM;

EID: 16344387546     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2004.07.013     Document Type: Article

References (34)

1. R.R. Seghi, I.L. Denry, and S.F. Rosenstiel Relative fracture toughness and hardness of new dental ceramics J Prosthet Dent 74 1995 145 150
2. W. Höland, M. Schweiger, M. Frank, and V. Rheinberger A comparison of the microstructure and properties of IPS Empress 2 and the IPS Empress glass-ceramic J Biomed Mater Res 53 2000 297 303
3. E.A. McLaren, and S.N. White Glass-infiltrated zirconia/alumia-based ceramic for crowns and fixed partial dentures Pract Periodont Aesthet Dent 11 1999 985 994
4. L. Pröbster, and J. Diehl Slip-casting alumina ceramics for crown and bridge restorations Quintessence Int 23 1992 25 31
5. K.H. Chong, J. Chai, Y. Takahashi, and W. Wozniak Flexural strength of In-Ceram alumina and In-Ceram Zirconia core materials Int J Prosthodont 15 2002 183 188
6. M. Andersson, M.E. Razzoog, A. Oden, E.A. Hegenbarth, and B.R. Lang Procera: a new way to achieve an all-ceramic crown Quintessence Int 29 1998 285 296
7. R.G. Luthardt, O. Sandkuhl, and B. Reitz Zirconia-TZP and alumina-advanced technologies for the manufacturing of single crowns Eur J Prosthodont Rest Dent 7 1999 113 119
8. T. Nakamura, A. Ohyama, A. Imanishi, T. Nakamura, and S. Ishigaki Fracture resistance of pressable glass-ceramic fixed partial dentures J Oral Rehabil 29 2002 951 955
9. J.W. McLean Development of esthetics in aluminous porcelain restorations J Esthet Dent 9 1997 208 214
10. A. Oden, M. Andersson, I. Krystek-Ondracek, and D. Magnusson Five-year clinical evaluation of Procera AllCeram crowns J Prosthet Dent 80 1998 450 456
11. G. Sjögren, R. Lantto, Å. Granberg, B-O. Sundström, and A. Tillberg Clinical examination of leucite-reinforced glass ceramic crowns (Empress) in general practices. A retrospective study Int J Prosthodont 12 1999 122 128
12. A. Bindl, and W.H. Mörmann An up to 5-year clinical evaluation of posterior In-Ceram CAD/CAM core crowns Int J Prosthodont 15 2002 451 456
13. S. Chitmongkolsuk, G. Heydecke, C. Stappert, and J.R. Strub Fracture strength of all-ceramic lithium disilicate and porcelain-fused-to-metal bridges for molar replacement after dynamic loading Eur J Prosthodont Restor Dent 10 2002 15 22
14. T. Nakamura, T. Ohyama, A. Imanishi, T. Nakamura, and S. Ishigaki Fracture resistance of pressable glass-ceramic fixed partial dentures J Oral Rehabil 29 2002 951 955
15. J. Tinschert, G. Natt, W. Mautsch, M. Augthun, and H. Spiekermann Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study Int J Prosthodont 14 2001 231 238
16. S. Kheradmandan, S.O. Koutayas, M. Bernhard, and J.R. Strub Fracture strength of four different types of anterior 3-unit bridges after thermo-mechanical fatigue in the dual-axis chewing simulator J Oral Rehabil 28 2001 361 369
17. K.G. Olsson, B. Furst, B. Andersson, and G.E. Carlsson A long-term retrospective and clinical follow-up study of In-Ceram Alumina FPDs Int J Prosthodont 16 2003 150 156
18. P. Vult von Steyern, O. Jonsson, and K. Nilner Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs Int J Prosthodont 14 2001 379 384
19. F. Filser, P. Kocher, F. Weibel, H. Luthy, P. Scharer, and L.J. Gauckler Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM) Int J Comput Dent 4 2001 89 106
20. R. Sjölin, A. Sundh, and M. Bergman The Decim system for the production of dental restorations Int J Comput Dent 2 1999 197 207
21. P. Christel, A. Meunier, M. Heller, J.P. Torre, and C.N. Peille Mechanical properties and short-term in-vivo evaluation of yttrium-oxide partially-stabilized zirconia J Biomed Mater Res 23 1989 45 61
22. R.H. Hannink, P.M. Kelly, and B.C. Muddle Transformation toughening in zirconia-containing ceramics J Am Ceram Soc 83 2000 461 487
23. C. Piconi, and G. Maccauro Zirconia as a ceramic biomaterial, a review Biomaterials 29 1999 1 25
24. J. Chevalier, B. Cales, and J.M. Drouin Low temperature aging of Y-TZP ceramics J Am Ceram Soc 82 1999 2150 2154
25. T. Kosmac, C. Oblak, P. Jevnikar, N. Funduk, and L. Marion The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic Dent Mater 15 1999 426 433
26. R. Morena, G.M. Beaudreau, P.E. Lockwood, A.L. Evans, and C.W. Fairhurst Fatigue of dental ceramics in a simulated oral environment J Dent Res 65 1986 993 997
27. W. Oh, and K.J. Anusavice Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures J Prosthet Dent 87 2002 536 542
28. A.H. de Aza, J. Chevalier, G. Fantozzi, M. Schehl, and R. Torrecillias Crack growth resistance of aluminia, zirconia and zirconia toughened alumina ceramics for joint prostheses Biomaterials 23 2002 937 945
29. J.L. Reed, and A.M. Lejus Effect of grinding and polishing on near surface phase transformations in zirconia Mat Res Bull 12 1977 949 954
30. J.R. Kelly, J.A. Tesk, and J.A. Sorensen Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling J Dent Res 74 1995 1253 1258
31. N. Wakabayashi, and K.J. Anusavice Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness J Dent Res 79 2000 1398 1404
32. M. Guazzato, K. Proos, L. Quach, and M. Vincent Swain Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics Biomaterials 25 2004 5045 5052
33. J. Tinschert, G. Natt, B. Dose, H. Fisher, and R. Marx Seitenzahnbrücken aus hochfester Strukturkeramik Dtsch Zahnarztl Z 54 1999 545 550
34. J. Geis-Gerstorfer, and P. Fässler Untersuchungen zum Ermüdungsverhalten der Dentalkeramiken Zirkondioxid-TZP und In-Ceram Dtsch Zahnarztl Z 54 1999 692 694