Advantages and challenges of the spray-drying technology for the production of pure drug particles and drug-loaded polymeric carriers

Advances in Colloid and Interface Science

Volumn 223, Issue , 2015, Pages 40-54

  Sosnik, Alejandro ^a   Seremeta, Katia P ^b,c,d  

^a TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

^b Facultad de Ciencias Naturales e Instituto M Lillo   (Argentina)

^c UNIVERSIDAD DE BUENOS AIRES   (Argentina)

^d National University of the Chaco Austral ^*  (Argentina)

Author keywords

Drug encapsulation; Nanocomposite microparticles; Polymeric microparticles; Polymeric nanoparticles; Pure drug particles; Spray drying

Indexed keywords

AIR; COST EFFECTIVENESS; DEHYDRATION; DRUG PRODUCTS; ENCAPSULATION; POLYMERS; SPRAY DRYING;

DRUG ENCAPSULATION; DRUG PARTICLES; NANOCOMPOSITE MICROPARTICLES; POLYMERIC MICROPARTICLES; POLYMERIC NANOPARTICLES;

DRYING;

DRUG CARRIER; NANOCOMPOSITE; NANOPARTICLE; POLYMER;

ANIMAL; CHEMISTRY; DEVICES; DRUG ADMINISTRATION ROUTE; DRUG DELIVERY SYSTEM; DRUG FORMULATION; DRUG INDUSTRY; HUMAN; NANOTECHNOLOGY; PROCEDURES; SCANNING ELECTRON MICROSCOPY;

ANIMALS; DRUG ADMINISTRATION ROUTES; DRUG CARRIERS; DRUG COMPOUNDING; DRUG DELIVERY SYSTEMS; DRUG INDUSTRY; HUMANS; MICROSCOPY, ELECTRON, SCANNING; NANOCOMPOSITES; NANOPARTICLES; NANOTECHNOLOGY; POLYMERS;

EID: 84938960718     PISSN: 00018686     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cis.2015.05.003     Document Type: Review

References (149)

1. A.L. Rattes, and W.P. Oliveira Spray drying conditions and encapsulating composition effects on formation and properties of sodium diclofenac microparticles Powder Technol 171 2007 7 14 10.1016/j.powtec.2006.09.007
2. C. Freitas, and R.H. Müller Spray-drying of solid lipid nanoparticles (SLNTM) Eur J Pharm Biopharm 46 1998 145 151 10.1016/S0939-6411(97)00172-0
3. Y.J. Fu, S.S. Shyu, F.H. Su, and P.C. Yu Development of biodegradable co-poly(D, L-lactic/glycolic acid) microspheres for the controlled release of 5-FU by the spray drying method Colloids Surf B: Biointerfaces 25 2002 269 279 10.1016/S0927-7765(01)00205-3
4. N. Schafroth, C. Arpagaus, U.Y. Jadhav, S. Makne, and D. Douroumis Nano and microparticle engineering of water insoluble drugs using a novel spray-drying process Colloids Surf B: Biointerfaces 90 2012 8 15 10.1016/j.colsurfb.2011.09.038
5. S.H. Lee, D. Heng, W.K. Ng, H.K. Chan, and R.B. Tan Nano spray drying: a novel method for preparing protein nanoparticles for protein therapy Int J Pharm 403 2011 192 200 10.1016/j.ijpharm.2010.10.012
6. J. Elversson, A. Millqvist-Fureby, G. Alderborn, and U. Elofsson Droplet and particle size relationship and shell thickness of inhalable lactose particles during spray drying J Pharm Sci 92 2003 900 910 10.1002/jps.10352
7. M. Fatnassi, C. Tourné-Péteilh, P. Peralta, T. Cacciaguerra, P. Dieudonné, J.M. Devoisselle, and et al. Encapsulation of complementary model drugs in spray-dried nanostructured materials J Sol-Gel Sci Technol 68 2013 307 316 10.1007/s10971-013-3170-y
8. K. Ståhl, M. Claesson, P. Lilliehorn, H. Lindén, and K. Bäckström The effect of process variables on the degradation and physical properties of spray dried insulin intended for inhalation Int J Pharm 233 2002 227 237 10.1016/S0378-5173(01)00945-0
9. A. Schoubben, P. Blasi, S. Giovagnoli, C. Rossi, and M. Ricci Development of a scalable procedure for fine calcium alginate particle preparation Chem Eng J 160 2010 363 369 10.1016/j.cej.2010.02.062
10. D. Heng, S.H. Lee, W.K. Ng, and R.B. Tan The nano spray dryer B-90 Expert Opin Drug Deliv 8 2011 965 972 10.1517/17425247.2011.588206
11. K. Cal, and K. Sollohub Spray drying technique. I: Hardware and process parameters J Pharm Sci 99 2010 575 586 10.1002/jps.21886
12. N.R. Rabbani, and P.C. Seville The influence of formulation components on the aerosolisation properties of spray-dried powders J Control Release 110 2005 130 140 10.1016/j.jconrel.2005.09.004
13. C. Gómez-Gaete, E. Fattal, L. Silva, M. Besnard, and N. Tsapis Dexamethasone acetate encapsulation into Trojan particles J Control Release 128 2008 41 49 10.1016/j.jconrel.2008.02.008
14. X. Li, N. Anton, C. Arpagaus, F. Belleteix, and T.F. Vandamme Nanoparticles by spray drying using innovative new technology: the Büchi nano spray dryer B-90 J Control Release 147 2010 304 310 10.1016/j.jconrel.2010.07.113
15. J. Berggren, G. Frenning, and G. Alderborn Compression behaviour and tablet-forming ability of spray-dried amorphous composite particles Eur J Pharm Sci 22 2004 191 200 10.1016/j.ejps.2004.03.008
16. L. Mu, M.M. Teo, H.Z. Ning, C.S. Tan, and S.S. Feng Novel powder formulations for controlled delivery of poorly soluble anticancer drug: application and investigation of TPGS and PEG in spray-dried particulate system J Control Release 103 2005 565 575 10.1016/j.jconrel.2004.12.023
17. Y. Takashima, R. Saito, A. Nakajima, M. Oda, A. Kimura, T. Kanazawa, and et al. Spray-drying preparation of microparticles containing cationic PLGA nanospheres as gene carriers for avoiding aggregation of nanospheres Int J Pharm 343 2007 262 269 10.1016/j.ijpharm.2007.05.042
18. W.S. Cheow, S. Li, and K. Hadinoto Spray drying formulation of hollow spherical aggregates of silica nanoparticles by experimental design Chem Eng Res Des 88 2010 673 685 10.1016/j.cherd.2009.11.012
19. O. Ní Ógáin, L. Tajber, O.I. Corrigan, and A.M. Healy Spray drying from organic solvents to prepare nanoporous/nanoparticulate microparticles of protein: excipient composites designed for oral inhalation J Pharm Pharmacol 64 2012 1275 1290 10.1111/j.2042-7158.2012.01488.x
20. A.S. Mujumdar Handbook of industrial drying Third ed. 2006 Taylor & Francis Group, CRC Press US
21. R.P. Raffin, D.S. Jornada, M.I. Ré, A.R. Pohlmann, and S.S. Guterres Sodium pantoprazole-loaded enteric microparticles prepared by spray drying: effect of the scale of production and process validation Int J Pharm 324 2006 10 18 10.1016/j.ijpharm.2006.06.045
22. W. Khan, and N. Kumar Drug targeting to macrophages using paromomycin-loaded albumin microspheres for treatment of visceral leishmaniasis: an in vitro evaluation J Drug Target 19 2011 239 250 10.3109/1061186X.2010.492524
23. M. Beck-Broichsitter, C. Schweiger, T. Schmehl, T. Gessler, W. Seeger, and T. Kissel Characterization of novel spray-dried polymeric particles for controlled pulmonary drug delivery J Control Release 158 2012 329 335 10.1016/j.jconrel.2011.10.030
24. C.W. Park, X. Li, F.G. Vogt, D. Hayes Jr., J.B. Zwischenberger, E.S. Park, and et al. Advanced spray-dried design, physicochemical characterization, and aerosol dispersion performance of vancomycin and clarithromycin multifunctional controlled release particles for targeted respiratory delivery as dry powder inhalation aerosols Int J Pharm 455 2013 374 392 10.1016/j.ijpharm.2013.06.047
25. C. Sander, K.D. Madsen, B. Hyrup, H.M. Nielsen, J. Rantanen, and J. Jacobsen Characterization of spray dried bioadhesive metformin microparticles for oromucosal administration Eur J Pharm Biopharm 85 2013 682 688 10.1016/j.ejpb.2013.05.017
26. C. Anish, A.K. Upadhyay, D. Sehgal, and A.K. Panda Influences of process and formulation parameters on powder flow properties and immunogenicity of spray dried polymer particles entrapping recombinant pneumococcal surface protein A Int J Pharm 466 2014 198 210 10.1016/j.ijpharm.2014.03.025
27. E.M. Littringer, S. Zellnitz, K. Hammernik, V. Adamer, H. Friedl, and N.A. Urbanetz Spray drying of aqueous salbutamol sulfate solutions using the nano spray dryer B-90 - the impact of process parameters on particle size Dry Technol 31 2013 1346 1353 10.1080/07373937.2013.793701
28. F. Wan, A. Bohr, M.J. Maltesen, S. Bjerregaard, C. Foged, J. Rantanen, and et al. Critical solvent properties affecting the particle formation process and characteristics of celecoxib-loaded PLGA microparticles via spray-drying Pharm Res 30 2013 1065 1076 10.1007/s11095-012-0943-x
29. L.T. Ngan, S.L. Wang, D.M. Hiep, P.M. Luong, N.T. Vui, T.M. Dinh, and et al. Preparation of chitosan nanoparticles by spray drying, and their antibacterial activity Res Chem Intermed 40 2014 2165 2175 10.1007/s11164-014-1594-9
30. A.B. Nandiyanto, and K. Okuyama Progress in developing spray-drying methods for the production of controlled morphology particles: from the nanometer to submicrometer size ranges Adv Powder Technol 22 2011 1 19 10.1016/j.apt.2010.09.011
31. D. Sen, A. Khan, J. Bahadur, S. Mazumder, and B.K. Sapra Use of small-angle neutron scattering to investigate modifications of internal structure in self-assembled grains of nanoparticles synthesized by spray drying J Colloid Interface Sci 347 2010 25 30 10.1016/j.jcis.2010.03.033
32. P. Gong, L. Zhang, X. Han, N. Shigwedha, W. Song, H. Yi, and et al. Injury mechanisms of lactic acid bacteria starter cultures during spray drying: a review Dry Technol 32 2014 793 800 10.1080/07373937.2013.860458
33. B.B. Patel, J.K. Patel, and S. Chakraborty Review of patents and application of spray drying in pharmaceutical, food and flavor industry Recent Pat Drug Deliv Formul 8 2014 63 78 10.2174/1872211308666140211122012
34. D. Krishnaiah, R. Sarbatly, and R. Nithyanandam Microencapsulation of Morinda citrifolia L. extract by spray-drying Chem Eng Res Des 90 2012 622 632 10.1016/j.cherd.2011.09.003
35. B. Baras, M.A. Benoit, and J. Gillard Parameters influencing the antigen release from spray-dried poly(DL-lactide) microparticles Int J Pharm 200 2000 133 145 10.1016/S0378-5173(00)00363-X
36. G. A., L. Ren, Z. Zhou, D. Lu, and S. Wang Design and evaluation of biodegradable enteric microcapsules of amifostine for oral delivery Int J Pharm 453 2013 441 447 10.1016/j.ijpharm.2013.06.019
37. K. Bowey, B.E. Swift, L.E. Flynn, and R.J. Neufeld Characterization of biologically active insulin-loaded alginate microparticles prepared by spray drying Drug Dev Ind Pharm 39 2013 457 465 10.3109/03639045.2012.662985
38. T. Bhowmik, B. D'Souza, R. Shashidharamurthy, C. Oettinger, P. Selvaraj, and M.J. D'Souza A novel microparticulate vaccine for melanoma cancer using transdermal delivery J Microencapsul 28 2011 294 300 10.3109/02652048.2011.559287
39. L. Tshweu, L. Katata, L. Kalombo, D.A. Chiappetta, C. Höcht, A. Sosnik, and et al. Enhanced oral bioavailability of the antiretroviral efavirenz encapsulated in poly(epsilon-caprolactone) nanoparticles by a spray-drying method Nanomedicine (Lond) 9 2014 1821 1833 10.2217/nnm.13.167
40. M. Maury, K. Murphy, S. Kumar, A. Mauerer, and G. Lee Spray-drying of proteins: effects of sorbitol and trehalose on aggregation and FT-IR amide I spectrum of an immunoglobulin G Eur J Pharm Biopharm 59 2005 251 261 10.1016/j.ejpb.2004.07.010
41. P. Tewa-Tagne, S. Briançon, and H. Fessi Spray-dried microparticles containing polymeric nanocapsules: formulation aspects, liquid phase interactions and particles characteristics Int J Pharm 325 2006 63 74 10.1016/j.ijpharm.2006.06.025
42. A. Gharsallaoui, G. Roudaut, O. Chambin, A. Voilley, and R. Saurel Applications of spray-drying in microencapsulation of food ingredients: an overview Food Res Int 40 2007 1107 1121 10.1016/j.foodres.2007.07.004
43. S.A. Mahdavi, S.M. Jafari, M. Ghorbani, and E. Assadpoor Spray-drying microencapsulation of anthocyanins by natural biopolymers: a review Dry Technol 32 2014 509 518 10.1080/07373937.2013.839562
44. M.E. Lane, F.S. Brennan, and O.I. Corrigan Comparison of post-emulsification freeze drying or spray drying processes for the microencapsulation of plasmid DNA J Pharm Pharmacol 57 2005 831 838 10.1211/0022357056406
45. A. Rampino, M. Borgogna, P. Blasi, B. Bellich, and A. Cesàro Chitosan nanoparticles: preparation, size evolution and stability Int J Pharm 455 2013 219 228 10.1016/j.ijpharm.2013.07.034
46. L. Tshweu, L. Katata, L. Kalombo, and H. Swai Nanoencapsulation of water-soluble drug, lamivudine, using a double emulsion spray-drying technique for improving HIV treatment J Nanopart Res 15 2013 2040 10.1007/s11051-013-2040-4
47. B. Tobar-Grande, R. Godoy, P. Bustos, C. von Plessing, E. Fattal, N. Tsapis, and et al. Development of biodegradable methylprednisolone microparticles for treatment of articular pathology using a spray-drying technique Int J Nanomedicine 8 2013 2065 2076 10.2147/IJN.S39327
48. T. Lebhardt, S. Roesler, H.P. Uusitalo, and T. Kissel Surfactant-free redispersible nanoparticles in fast-dissolving composite microcarriers for dry-powder inhalation Eur J Pharm Biopharm 78 2011 90 96 10.1016/j.ejpb.2010.12.002
49. R. Kolakovic, T. Laaksonen, L. Peltonen, A. Laukkanen, and J. Hirvonen Spray-dried nanofibrillar cellulose microparticles for sustained drug release Int J Pharm 430 2012 47 55 10.1016/j.ijpharm.2012.03.031
50. J.O. Sham, Y. Zhang, W.H. Finlay, W.H. Roa, and R. Löbenberg Formulation and characterization of spray-dried powders containing nanoparticles for aerosol delivery to the lung Int J Pharm 269 2004 457 467 10.1016/j.ijpharm.2003.09.041
51. K.P. Seremeta, M.I. Reyes Tur, S. Martínez Pérez, C. Höcht, C. Taira, O.D. López Hernández, and et al. Spray-dried didanosine-loaded polymeric particles for enhanced oral bioavailability Colloids Surf B: Biointerfaces 123 2014 515 523 10.1016/j.colsurfb.2014.09.055
52. P. Tewa-Tagne, S. Briançon, and H. Fessi Preparation of redispersible dry nanocapsules by means of spray-drying: development and characterisation Eur J Pharm Sci 30 2007 124 135 10.1016/j.ejps.2006.10.006
53. B. Bittner, M. Morlock, H. Koll, G. Winter, and T. Kissel Recombinant human erythropoietin (rhEPO) loaded poly(lactide-co-glycolide) microspheres: influence of the encapsulation technique and polymer purity on microsphere characteristics Eur J Pharm Biopharm 45 1998 295 305 10.1016/S0939-6411(98)00012-5
54. C. Zhu, Y. Shoji, S. McCray, M. Burke, C.E. Hartman, J.A. Chichester, and et al. Stabilization of HAC1 influenza vaccine by spray drying: formulation development and process scale-up Pharm Res 31 2014 3006 3018 10.1007/s11095-014-1394-3
55. M. Maury, K. Murphy, S. Kumar, L. Shi, and G. Lee Effects of process variables on the powder yield of spray-dried trehalose on a laboratory spray-dryer Eur J Pharm Biopharm 59 2005 565 573 10.1016/j.ejpb.2004.10.002
56. E. Cevher, Z. Orhan, L. Mülazimoʇlu, D. Sensoy, M. Alper, A. Yildiz, and et al. Characterization of biodegradable chitosan microspheres containing vancomycin and treatment of experimental osteomyelitis caused by methicillin-resistant Staphylococcus aureus with prepared microspheres Int J Pharm 317 2006 127 135 10.1016/j.ijpharm.2006.03.014
57. A.M. Oliveira, K.L. Guimarães, N.N. Cerize, A.S. Tunussi, and J.G. Poço Nano spray drying as an innovative technology for encapsulating hydrophilic active pharmaceutical ingredients (API) J Nanomed Nanotechnol 4 2013 6 10.4172/2157-7439.1000186
58. F. Andrade, D. Rafael, M. Videira, D. Ferreira, A. Sosnik, and B. Sarmento Nanotechnology and pulmonary delivery to overcome resistance in infectious diseases Adv Drug Deliv Rev 65 2013 1816 1827 10.1016/j.addr.2013.07.020
59. K.P. Seremeta, D.A. Chiappetta, and A. Sosnik Poly(ε-caprolactone), Eudragit® RS 100 and poly(ε-caprolactone)/Eudragit® RS 100 blend submicron particles for the sustained release of the antiretroviral efavirenz Colloids Surf B: Biointerfaces 102 2013 441 449 10.1016/j.colsurfb.2012.06.038
60. E. Elmowafy, R. Osman, A.H. El-Shamy, and G.A. Awad Nanocomplexes of an insulinotropic drug: optimization, microparticle formation, and antidiabetic activity in rats Int J Nanomedicine 9 2014 4449 4465 10.2147/IJN.S66876
61. K. Schmid, C. Arpagaus, and W. Friess Evaluation of the Nano Spray Dryer B-90 for pharmaceutical applications Pharm Dev Technol 16 2011 287 294 10.3109/10837450.2010.485320
62. S.H. Lee, J. Teo, D. Heng, W.K. Ng, H.K. Chan, and R.B. Tan Synergistic combination dry powders for inhaled antimicrobial therapy: formulation, characterization and in vitro evaluation Eur J Pharm Biopharm 83 2013 275 284 10.1016/j.ejpb.2012.09.002
63. A. Schoubben, S. Giovagnoli, M.C. Tiralti, P. Blasi, and M. Ricci Capreomycin inhalable powders prepared with an innovative spray-drying technique Int J Pharm 469 2014 132 139 10.1016/j.ijpharm.2014.04.042
64. K. Baba, and K. Nishida Calpain inhibitor nanocrystals prepared using Nano Spray Dryer B-90 Nanoscale Res Lett 7 2012 436 10.1186/1556-276X-7-436
65. U. Brinkmann-Trettenes, S. Barnert, and A. Bauer-Brandl Single step bottom-up process to generate solid phospholipid nano-particles Pharm Dev Technol 19 2014 326 332 10.3109/10837450.2013.778875
66. S. Harsha, M. Attimard, T.A. Khan, A.B. Nair, B.E. Aldhubiab, S. Sangi, and et al. Design and formulation of mucoadhesive microspheres of sitagliptin J Microencapsul 30 2013 257 264 10.3109/02652048.2012.720722
67. Spray drying - scale up from research to industrial production http://www.niro.com/niro/cmsresources.nsf/filenames/small-scale-drying-lab.pdf/$file/small-scale-drying-lab.pdf
68. Best@BUCHI about the scale up process from a mini spray dryer B-290 to a mobile minor from Niro http://static1.buchi.com/sites/default/files/downloads/B-290-Scale-up-B-290-Niro-MOBILE-MINOR-en-01.pdf
69. Y. Kojima, T. Ohta, K. Shiraki, R. Takano, H. Maeda, and Y. Ogawa Effects of spray drying process parameters on the solubility behavior and physical stability of solid dispersions prepared using a laboratory-scale spray dryer Drug Dev Ind Pharm 39 2013 1484 1493 10.3109/03639045.2012.692378
70. A. Grenha, B. Seijo, and C. Remuñán-López Microencapsulated chitosan nanoparticles for lung protein delivery Eur J Pharm Sci 25 2005 427 437 10.1016/j.ejps.2005.04.009
71. K. Hadinoto, K. Zhu, and R.B. Tan Drug release study of large hollow nanoparticulate aggregates carrier particles for pulmonary delivery Int J Pharm 341 2007 195 206 10.1016/j.ijpharm.2007.03.035
72. K. Tomoda, T. Ohkoshi, Y. Kawai, M. Nishiwaki, T. Nakajima, and K. Makino Preparation and properties of inhalable nanocomposite particles: effects of the temperature at a spray-dryer inlet upon the properties of particles Colloids Surf B: Biointerfaces 61 2008 138 144 10.1016/j.colsurfb.2007.07.016
73. J.C. Sung, D.J. Padilla, L. Garcia-Contreras, J.L. Verberkmoes, D. Durbin, C.A. Peloquin, and et al. Formulation and pharmacokinetics of self-assembled rifampicin nanoparticle systems for pulmonary delivery Pharm Res 26 2009 1847 1855 10.1007/s11095-009-9894-2
74. H. Shen, A.A. Banerjee, P. Mlynarska, M. Hautman, S. Hong, I.M. Kapetanovic, and et al. Enhanced oral bioavailability of a cancer preventive agent (SR13668) by employing polymeric nanoparticles with high drug loading J Pharm Sci 101 2012 3877 3885 10.1002/jps.23269
75. F. Ungaro, I. d'Angelo, C. Coletta, Bianca R. d'Emmanuele di Villa, R. Sorrentino, B. Perfetto, and et al. Dry powders based on PLGA nanoparticles for pulmonary delivery of antibiotics: modulation of encapsulation efficiency, release rate and lung deposition pattern by hydrophilic polymers J Control Release 157 2012 149 159 10.1016/j.jconrel.2011.08.010
76. G. Pilcer, F. Vanderbist, and K. Amighi Preparation and characterization of spray-dried tobramycin powders containing nanoparticles for pulmonary delivery Int J Pharm 365 2009 162 169 10.1016/j.ijpharm.2008.08.014
77. C. Duret, N. Wauthoz, T. Sebti, F. Vanderbist, and K. Amighi Solid dispersions of itraconazole for inhalation with enhanced dissolution, solubility and dispersion properties Int J Pharm 428 2012 103 113 10.1016/j.ijpharm.2012.03.002
78. P.S. Pourshahab, K. Gilani, E. Moazeni, H. Eslahi, M.R. Fazeli, and H. Jamalifar Preparation and characterization of spray dried inhalable powders containing chitosan nanoparticles for pulmonary delivery of isoniazid J Microencapsul 28 2011 605 613 10.3109/02652048.2011.599437
79. D.K. Jensen, L.B. Jensen, S. Koocheki, L. Bengtson, D. Cun, H.M. Nielsen, and et al. Design of an inhalable dry powder formulation of DOTAP-modified PLGA nanoparticles loaded with siRNA J Control Release 157 2012 141 148 10.1016/j.jconrel.2011.08.011
80. K. Kho, W.S. Cheow, R.H. Lie, and K. Hadinoto Aqueous re-dispersibility of spray-dried antibiotic-loaded polycaprolactone nanoparticle aggregates for inhaled anti-biofilm therapy Powder Technol 203 2010 432 439 10.1016/j.powtec.2010.06.003
81. A. Grenha, B. Seijo, C. Serra, and C. Remuñán-López Chitosan nanoparticle-loaded mannitol microspheres: structure and surface characterization Biomacromolecules 8 2007 2072 2079 10.1021/bm061131g
82. D.M. Jensen, D. Cun, M.J. Maltesen, S. Frokjaer, H.M. Nielsen, and C. Foged Spray drying of siRNA-containing PLGA nanoparticles intended for inhalation J Control Release 142 2010 138 145 10.1016/j.jconrel.2009.10.010
83. Y.J. Son, P. Worth Longest, and M. Hindle Aerosolization characteristics of dry powder inhaler formulations for the excipient enhanced growth (EEG) application: effect of spray drying process conditions on aerosol performance Int J Pharm 443 2013 137 145 10.1016/j.ijpharm.2013.01.003
84. J.S. Woo, M.G. Piao, D.X. Li, D.S. Ryu, J.Y. Choi, J.A. Kim, and et al. Development of cyclosporin A-loaded hyaluronic microsphere with enhanced oral bioavailability Int J Pharm 345 2007 134 141 10.1016/j.ijpharm.2007.08.050
85. T. Cerchiara, F. Bigucci, G. Corace, V. Zecchi, and B. Luppi Eudragit-coated albumin nanospheres carrying inclusion complexes for oral administration of indomethacin J Incl Phenom Macrocycl Chem 71 2011 129 136 10.1007/s10847-010-9916-z
86. L. Katata, L. Tshweu, S. Naidoo, L. Kalombo, and H. Swai Design and formulation of nano-sized spray dried efavirenz - part I: influence of formulation parameters J Nanopart Res 14 2012 1247 10.1007/s11051-012-1247-0
87. M. Morgen, C. Bloom, R. Beyerinck, A. Bello, W. Song, K. Wilkinson, and et al. Polymeric nanoparticles for increased oral bioavailability and rapid absorption using celecoxib as a model of a low-solubility, high-permeability drug Pharm Res 29 2012 427 440 10.1007/s11095-011-0558-7
88. D. Heng, D.J. Cutler, H.K. Chan, J. Yun, and J.A. Raper What is a suitable dissolution method for drug nanoparticles? Pharm Res 25 2008 1696 1701 10.1007/s11095-008-9560-0
89. S. Kumar, X. Xu, R. Gokhale, and D.J. Burgess Formulation parameters of crystalline nanosuspensions on spray drying processing: a DoE approach Int J Pharm 464 2014 34 45 10.1016/j.ijpharm.2014.01.013
90. Y. Shi, A. Wan, Y. Shi, Y. Zhang, and Y. Chen Experimental and mathematical studies on the drug release properties of aspirin loaded chitosan nanoparticles Biomed Res Int 613619 2014 10.1155/2014/613619
91. K. Baba, and K. Nishida Steroid nanocrystals prepared using the nano spray dryer B-90 Pharmaceutics 5 2013 107 114 10.3390/pharmaceutics5010107
92. J.G. Chan, H.K. Chan, C.A. Prestidge, J.A. Denman, P.M. Young, and D. Traini A novel dry powder inhalable formulation incorporating three first-line anti-tubercular antibiotics Eur J Pharm Biopharm 83 2013 285 292 10.1016/j.ejpb.2012.08.007
93. R.T. Addo, A. Siddig, R. Siwale, N.J. Patel, J. Akande, A.N. Uddin, and et al. Formulation, characterization and testing of tetracaine hydrochloride-loaded albumin-chitosan microparticles for ocular drug delivery J Microencapsul 27 2010 95 104 10.3109/02652040903010638
94. H.K. Stulzer, M.P. Tagliari, A.L. Parize, M.A. Silva, and M.C. Laranjeira Evaluation of cross-linked chitosan microparticles containing acyclovir obtained by spray-drying Mater Sci Eng C 29 2009 387 392 10.1016/j.msec.2008.07.030
95. L.H. Reddy, R.K. Sharma, K. Chuttani, A.K. Mishra, and R.R. Murthy Etoposide-incorporated tripalmitin nanoparticles with different surface charge: formulation, characterization, radiolabeling, and biodistribution studies AAPS J 6 2004 e23 10.1208/aapsj060323
96. K.Y. Yang, H. Hwang du, A.M. Yousaf, D.W. Kim, Y.J. Shin, O.N. Bae, and et al. Silymarin-loaded solid nanoparticles provide excellent hepatic protection: physicochemical characterization and in vivo evaluation Int J Nanomedicine 8 2013 3333 3343 10.2147/IJN.S50683
97. Z. Li, Q. Li, S. Simon, N. Guven, K. Borges, and B.B. Youan Formulation of spray-dried phenytoin loaded poly(ε-caprolactone) microcarrier intended for brain delivery to treat epilepsy J Pharm Sci 96 2007 1018 1030 10.1002/jps.20935
98. P. López-Gasco, I. Iglesias, J. Benedí, R. Lozano, J.M. Teijón, and M.D. Blanco Paclitaxel-loaded polyester nanoparticles prepared by spray-drying technology: in vitro bioactivity evaluation J Microencapsul 28 2011 417 429 10.3109/02652048.2011.576785
99. M.C. Fontana, T.L. Durli, A.R. Pohlmann, S.S. Guterres, and R.C. Beck Polymeric controlled release inhalable powder produced by vibrational spray-drying: one-step preparation and in vitro lung deposition Powder Technol 258 2014 49 59 10.1016/j.powtec.2014.03.011
100. R. Parikh, and S. Dalwadi Preparation and characterization of controlled release poly-ε-caprolactone microparticles of isoniazid for drug delivery through pulmonary route Powder Technol 264 2014 158 165 10.1016/j.powtec.2014.04.077
101. P. Muttil, J. Kaur, K. Kumar, A.B. Yadav, R. Sharma, and A. Misra Inhalable microparticles containing large payload of anti-tuberculosis drugs Eur J Pharm Sci 32 2007 140 150 10.1016/j.ejps.2007.06.006
102. A.A. da Silva Jr., J.R. de Matos, T.P. Formariz, G. Rossanezi, M.V. Scarpa, E.S. do Egito, and et al. Thermal behavior and stability of biodegradable spray-dried microparticles containing triamcinolone Int J Pharm 368 2009 45 55 10.1016/j.ijpharm.2008.09.054
103. Y. Kohl, C. Kaiser, W. Bost, F. Stracke, M. Fournelle, C. Wischke, and et al. Preparation and biological evaluation of multifunctional PLGA-nanoparticles designed for photoacoustic imaging Nanomed Nanotechnol Biol Med 7 2011 228 237 10.1016/j.nano.2010.07.006
104. J.P. Raval, D.R. Naik, and P.S. Patel Spray-dried cefixime encapsulated poly(lactide-co-glycolide) microparticles: characterization and evaluation of in vitro release kinetics with antibacterial activity Dry Technol 30 2012 865 872 10.1080/07373937.2012.673526
105. A. Yildiz, E. John, Y. Özsoy, A. Araman, J.C. Birchall, K.J. Broadley, and et al. Inhaled extended-release microparticles of heparin elicit improved pulmonary pharmacodynamics against antigen-mediated airway hyper-reactivity and inflammation J Control Release 162 2012 456 463 10.1016/j.jconrel.2012.07.008
106. F. Wan, J.X. Wu, A. Bohr, S.G. Baldursdottir, M.J. Maltesen, S. Bjerregaard, and et al. Impact of PLGA molecular behavior in the feed solution on the drug release kinetics of spray dried microparticles Polymer 54 2013 5920 5927 10.1016/j.polymer.2013.08.044
107. S. Guerrero, C. Teijón, E. Muñíz, J.M. Teijón, and M.D. Blanco Characterization and in vivo evaluation of ketotifen-loaded chitosan microspheres Carbohydr Polym 79 2010 1006 1013 10.1016/j.carbpol.2009.10.034
108. 3 factorial design for preventing restenosis Drug Deliv 17 2010 178 186 10.3109/10717541003667780
109. W. Samy, N. Elgindy, and H.M. El-Gowelli Biopolymeric nifedipine powder for acceleration of wound healing Int J Pharm 422 2012 323 331 10.1016/j.ijpharm.2011.11.021
110. V. Tokárová, O. Kašpar, Z. Knejzlík, P. Ulbrich, and F. Štěpánek Development of spray-dried chitosan microcarriers for nanoparticle delivery Powder Technol 235 2013 797 805 10.1016/j.powtec.2012.12.005
111. E. Başaran, E. Yenilmez, M.S. Berkman, G. Büyükköroʇlu, and Y. Yazan Chitosan nanoparticles for ocular delivery of cyclosporine A J Microencapsul 31 2014 49 57 10.3109/02652048.2013.805839
112. N. Sivadas, and S.A. Cryan Inhalable, bioresponsive microparticles for targeted drug delivery in the lungs J Pharm Pharmacol 63 2011 369 375 10.1111/j.2042-7158.2010.01234.x
113. A. Paudel, Y. Loyson, and G. Van den Mooter An investigation into the effect of spray drying temperature and atomizing conditions on miscibility, physical stability, and performance of naproxen-PVP K 25 solid dispersions J Pharm Sci 102 2013 1249 1267 10.1002/jps.23459
114. T.H. Tran, B.K. Poudel, N. Marasini, S.C. Chi, H.G. Choi, C.S. Yong, and et al. Preparation and evaluation of raloxifene-loaded solid dispersion nanoparticle by spray-drying technique without an organic solvent Int J Pharm 443 2013 50 57 10.1016/j.ijpharm.2013.01.013
115. D.X. Li, Y.K. Oh, S.J. Lim, J.O. Kim, H.J. Yang, J.H. Sung, and et al. Novel gelatin microcapsule with bioavailability enhancement of ibuprofen using spray-drying technique Int J Pharm 355 2008 277 284 10.1016/j.ijpharm.2007.12.020
116. A. Sosnik, J. das Neves, and B. Sarmento Mucoadhesive polymers in the design of nano-drug delivery systems for administration by non-parenteral routes: a review Prog Polym Sci 39 2014 2030 2075 10.1016/j.progpolymsci.2014.07.010
117. R.O. Cook, R.K. Pannu, and I.W. Kellaway Novel sustained release microspheres for pulmonary drug delivery J Control Release 104 2005 79 90 10.1016/j.jconrel.2005.01.003
118. M.D. Blanco, R.L. Sastre, C. Teijón, R. Olmo, and J.M. Teijón Degradation behaviour of microspheres prepared by spray-drying poly(D, L-lactide) and poly(D, L-lactide-co-glycolide) polymers Int J Pharm 326 2006 139 147 10.1016/j.ijpharm.2006.07.030
119. T.P. Learoyd, J.L. Burrows, E. French, and P.C. Seville Chitosan-based spray-dried respirable powders for sustained delivery of terbutaline sulfate Eur J Pharm Biopharm 68 2008 224 234 10.1016/j.ejpb.2007.04.017
120. S. Gungor, A. Okyar, S. Erturk-Toker, G. Baktir, and Y. Ozsoy Ondansetron-loaded biodegradable microspheres as a nasal sustained delivery system: In vitro/in vivo studies Pharm Dev Technol 15 2010 258 265 10.3109/10837450903148257
121. E. Gavini, A.B. Hegge, G. Rassu, V. Sanna, C. Testa, G. Pirisino, and et al. Nasal administration of carbamazepine using chitosan microspheres: In vitro/in vivo studies Int J Pharm 307 2006 9 15 10.1016/j.ijpharm.2005.09.013
122. N. Brandhonneur, F. Chevanne, V. Vié, B. Frisch, R. Primault, M.F. Le Potier, and et al. Specific and non-specific phagocytosis of ligand-grafted PLGA microspheres by macrophages Eur J Pharm Sci 36 2009 474 485 10.1016/j.ejps.2008.11.013
123. A.K. Jones, N.K. Bejugam, H. Nettey, R. Addo, and M.J. D'Souza Spray-dried doxorubicin-albumin microparticulate systems for treatment of multidrug resistant melanomas J Drug Target 19 2011 427 433 10.3109/1061186X.2010.504270
124. M.S. Crcarevska, M.G. Dodov, G. Petrusevska, I. Gjorgoski, and K. Goracinova Bioefficacy of budesonide loaded crosslinked polyeletrolyte microparticles in rat model of induced colitis J Drug Target 17 2009 788 802 10.3109/10611860903161310
125. S. Kumar, J. Shen, and D.J. Burgess Nano-amorphous spray dried powder to improve oral bioavailability of itraconazole J Control Release 192 2014 95 102 10.1016/j.jconrel.2014.06.059
126. D.H. Oh, Y.D. Yan, D.W. Kim, J.O. Kim, C.S. Yong, and H.G. Choi Development of flurbiprofen-loaded nanoparticles with a narrow size distribution using sucrose Drug Dev Ind Pharm 40 2014 172 177 10.3109/03639045.2012.752501
127. T. Nassar, S. Attili-Qadri, O. Harush-Frenkel, S. Farber, S. Lecht, P. Lazarovici, and et al. High plasma levels and effective lymphatic uptake of docetaxel in an orally available nanotransporter formulation Cancer Res 71 2011 3018 3028 10.1158/0008-5472.CAN-10-3118
128. T. Bhowmik, B. D'Souza, M.N. Uddin, and M.J. D'Souza Oral delivery of microparticles containing plasmid DNA encoding hepatitis-B surface antigen J Drug Target 20 2012 364 371 10.3109/1061186X.2012.662686
129. L. Chablani, S.A. Tawde, A. Akalkotkar, C. D'Souza, P. Selvaraj, and M.J. D'Souza Formulation and evaluation of a particulate oral breast cancer vaccine J Pharm Sci 101 2012 3661 3671 10.1002/jps.23275
130. P.N. Shastri, M.C. Kim, F.S. Quan, M.J. D'Souza, and S.M. Kang Immunogenicity and protection of oral influenza vaccines formulated into microparticles J Pharm Sci 101 2012 3623 3635 10.1002/jps.23220
131. A. García, D. Leonardi, G.N. Piccirilli, M.E. Mamprin, A.C. Olivieri, and M.C. Lamas Spray drying formulation of albendazole microspheres by experimental design. In vitro-in vivo studies Drug Dev Ind Pharm 41 2015 244 252 10.3109/03639045.2013.858737
132. N. Marasini, T.H. Tran, B.K. Poudel, H.J. Cho, Y.K. Choi, S.C. Chi, and et al. Fabrication and evaluation of pH-modulated solid dispersion for telmisartan by spray-drying technique Int J Pharm 441 2013 424 432 10.1016/j.ijpharm.2012.11.012
133. L. Cruz, E. Fattal, L. Tasso, G.C. Freitas, A.B. Carregaro, S.S. Guterres, and et al. Formulation and in vivo evaluation of sodium alendronate spray-dried microparticles intended for lung delivery J Control Release 152 2011 370 375 10.1016/j.jconrel.2011.02.030
134. S. Jafarinejad, K. Gilani, E. Moazeni, M. Ghazi-Khansari, A.R. Najafabadi, and N. Mohajel Development of chitosan-based nanoparticles for pulmonary delivery of itraconazole as dry powder formulation Powder Technol 222 2012 65 70 10.1016/j.powtec.2012.01.045
135. R. Cortesi, S.C. Ajanji, E. Sivieri, M. Manservigi, G. Fundueanu, E. Menegatti, and et al. Eudragit microparticles as a possible tool for ophthalmic administration of acyclovir J Microencapsul 24 2007 445 456 10.1080/02652040701374889
136. J.A. Straub, D.E. Chickering, J.C. Lovely, H. Zhang, B. Shah, W.R. Waud, and et al. Intravenous hydrophobic drug delivery: a porous particle formulation of paclitaxel (AI-850) Pharm Res 22 2005 347 355 10.1007/s11095-004-1871-1
137. T. Cerchiara, B. Luppi, G. Chidichimo, F. Bigucci, and V. Zecchi Chitosan and poly(methyl vinyl ether-co-maleic anhydride) microparticles as nasal sustained delivery systems Eur J Pharm Biopharm 61 2005 195 200 10.1016/j.ejpb.2005.05.005
138. T. Zhang, C. Zhang, V. Agrahari, J.B. Murowchick, N.A. Oyler, and B.B. Youan Spray drying tenofovir loaded mucoadhesive and pH-sensitive microspheres intended for HIV prevention Antivir Res 97 2013 334 346 10.1016/j.antiviral.2012.12.019
139. J.L. Arias, M. López-Viota, E. Sáez-Fernández, and M.A. Ruiz Formulation and physicochemical characterization of poly(epsilon-caprolactone) nanoparticles loaded with ftorafur and diclofenac sodium Colloids Surf B: Biointerfaces 75 2010 204 208 10.1016/j.colsurfb.2009.08.032
140. J.P. Rao, and K.E. Geckeler Polymer nanoparticles: preparation techniques and size-control parameters Prog Polym Sci 36 2011 887 913 10.1016/j.progpolymsci.2011.01.001
141. K. Adibkia, Y. Javadzadeh, S. Dastmalchi, G. Mohammadi, F.K. Niri, and M. Alaei-Beirami Naproxen-eudragit® RS100 nanoparticles: preparation and physicochemical characterization Colloids Surf B: Biointerfaces 83 2011 155 159 10.1016/j.colsurfb.2010.11.014
142. A. Sheikh Hassan, A. Sapin, A. Lamprecht, E. Emond, F. El Ghazouani, and P. Maincent Composite microparticles with in vivo reduction of the burst release effect Eur J Pharm Biopharm 73 2009 337 344 10.1016/j.ejpb.2009.07.009
143. C. Pinto Reis, R.J. Neufeld, A.J. Ribeiro, and F. Veiga Nanoencapsulation I. Methods for preparation of drug-loaded polymeric nanoparticles Nanomed Nanotechnol Biol Med 2 2006 8 21 10.1016/j.nano.2005.12.003
144. W.L. Lee, W.L. Foo, E. Widjaja, and S.C. Loo Manipulation of process parameters to achieve different ternary phase microparticle configurations Acta Biomater 6 2010 1342 1352 10.1016/j.actbio.2009.10.028
145. H.F. Florindo, S. Pandit, L. Lacerda, L.M. Gonçalves, H.O. Alpar, and A.J. Almeida The enhancement of the immune response against S. equi antigens through the intranasal administration of poly-epsilon-caprolactone-based nanoparticles Biomaterials 30 2009 879 891 10.1016/j.biomaterials.2008.10.035
146. J.C. Jeong, J. Lee, and K. Cho Effects of crystalline microstructure on drug release behavior of poly(epsilon-caprolactone) microspheres J Control Release 92 2003 249 258 10.1016/S0168-3659(03)00367-5
147. W.S. Cheow, M.W. Chang, and K. Hadinoto Antibacterial efficacy of inhalable levofloxacin-loaded polymeric nanoparticles against E. coli biofilm cells: the effect of antibiotic release profile Pharm Res 27 2010 1597 1609 10.1007/s11095-010-0142-6
148. Nano spray dryer B-90 technical data sheet http://static2.buchi.com/sites/default/files/technical-data-pdf/B-90-Data-Sheet-en-A-0.pdf
149. Mini spray dryer B-290 technical data sheet http://static2.buchi.com/sites/default/files/technical-data-pdf/B-290-Data-Sheet-en-C-1.pdf