A simple application of conjugate profile theory to the development of a silicon micro tribometer

ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014

Volumn 2, Issue , 2014, Pages

  Belfiore, Nicola P ^a   Prosperi, Gabriele ^a   Crescenzi, Rocco ^a  

^a SAPIENZA UNIVERSITY OF ROME   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

FRICTION; NANOTRIBOLOGY; SILICON;

BLOCK-ON-RING; CONCEPT DESIGNS; CONTACT CONDITIONS; EXPERIMENTAL SET UP; FRICTION AND WEAR; MICRO AND NANO TRIBOLOGY; PROFILE THEORY; RELATIVE MOTION;

FINITE ELEMENT METHOD;

EID: 84916897860     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/ESDA2014-20296     Document Type: Conference Paper

References (40)

1. Walsh, S. T., Boylan, R., and Bart, S. F., 1995. "Overcoming stiction in mems manufacturing". Microcontamination, 13(3).
2. Maboudian, R., Ashurst, W., and Carraro, C., 2000. "Selfassembled monolayers as anti-stiction coatings for mems: Characteristics and recent developments". Sensors and Ac-tuators, A: Physical, 82(1), pp. 219-223.
3. Ashurst,W., Yau, C., Carraro, C., Lee, C., Kluth, G., Howe, R., and Maboudian, R., 2001. "Alkene based monolayer films as anti-stiction coatings for polysilicon mems". Sen-sors and Actuators, A: Physical, 90(3), pp. 239-248.
4. Ashurst, W., Yau, C., Carraro, C., Maboudian, R., and Dugger, M., 2001. "Dichlorodimethylsilane as an antistiction monolayer for mems: A comparison to the octadecyltrichlosilane self-Assembled monolayer". Journal of Mi-croelectromechanical Systems, 10(1), pp. 41-49.
5. Jun, Y., and Zhu, X., 2003. "Alkoxyl monolayers as antistiction coatings in si-based mems devices". Journal of Ad-hesion Science and Technology, 17(4), pp. 593-601.
6. Ashurst,W., Carraro, C., and Maboudian, R., 2003. "Vapor phase anti-stiction coatings for mems". IEEE Transactions on Device and Materials Reliability, 3(4), pp. 173-178.
7. Ashurst, W., Carraro, C., Moboudian, R., and Frey, W., 2003. "Wafer level anti-stiction coatings for mems". Sen-sors and Actuators, A: Physical, 104(3), pp. 213-221.
8. Gunda, N., Jha, S., and Sastri, S., 2004. "Anti-stiction coatings for mems devices". Advanced Materials and Pro-cesses, 162(9), pp. 27-28. cited By (since 1996)2.
9. Bhushan, B., Kasai, T., Kulik, G., Barbieri, L., and Hoffmann, P., 2005. "Afm study of perfluoroalkylsilane and alkylsilane self-Assembled monolayers for anti-stiction in mems/nems". Ultramicroscopy, 105(1-4), pp. 176-188.
10. Yamashita, T., Itoh, T., and Suga, T., 2011. "Investigation of anti-stiction coating for ohmic contact mems switches with thiophenol and 2-naphthalenethiol self-Assembled monolayer". Sensors and Actuators, A: Physical, 172(2), pp. 455-461.
11. Yamashita, T., Itoh, T., and Suga, T., 2012. "Anti-stiction coatings for mems switches based on quantitative evaluation of adhesion forces". Journal of Japan Institute of Elec-tronics Packaging, 15(1), pp. 49-58.
12. Fujitsuka, N., and Sakata, J., 2002. "A new processing technique to prevent stiction using silicon selective etching for soi-mems". Sensors and Actuators, A: Physical, 97-98, pp. 716-719.
13. Yamazaki, H., Ikehashi, T., Ohguro, T., Ogawa, E., Kojima, K., Ishimaru, K., and Ishiuchi, H., 2007. "An intelligent bipolar actuation method with high stiction immunity for rf mems capacitive switches and variable capacitors". Sensors and Actuators, A: Physical, 139(1-2 SPEC. ISS.), pp. 233-236.
14. Savkar, A., Murphy, K., Leseman, Z., Mackin, T., and Begley, M., 2007. "On the use of structural vibrations to release stiction failed mems". Journal of Microelectromechanical Systems, 16(1), pp. 163-173.
15. Iannacci, J., Repchankova, A., Faes, A., Tazzoli, A., Meneghesso, G., and Betta, G., 2010. "Enhancement of rfmems switch reliability through an active anti-stiction heatbased mechanism". Microelectronics Reliability, 50(9-11), pp. 1599-1603.
16. Merlijn Van Spengen, W., Puers, R., and De Wolf, I., 2002. "A physical model to predict stiction in mems". Journal of Micromechanics and Microengineering, 12(5), pp. 702-713.
17. Zhao, Y., 2003. "Stiction and anti-stiction in mems and nems". Acta Mechanica Sinica/Lixue Xuebao, 19(1), pp. 1-10. cited By (since 1996)13.
18. Ali, S., Jennings, J., and Phinney, L., 2004. "Temperature dependence for in-use stiction of polycrystalline silicon mems cantilevers". Sensors and Actuators, A: Physi-cal, 113(1), pp. 60-70. cited By (since 1996)6.
19. Zhuang, Y., and Menon, A., 2005. "On the stiction of mems materials". Tribology Letters, 19(2), pp. 111-117.
20. Hariri, A., Zu, J., and Ben Mrad, R., 2006. "Modeling of dry stiction in micro electro-mechanical systems (mems)". Journal of Micromechanics and Microengineering, 16(7), pp. 1195-1206.
21. Hariri, A., Zu, J., and Mrad, R., 2007. "Modeling of wet stiction in microelectromechanical systems (mems)". Jour-nal of Microelectromechanical Systems, 16(5), pp. 1276-1285.
22. Yu, T., Ranganathan, R., Johnson, N., Yadav, N., Gale, R., and Dallas, T., 2007. "In situ characterization of induced stiction in a mems". Journal of Microelectromechanical Systems, 16(2), pp. 355-364.
23. Haluzan, D., Klymyshyn, D., Brner, M., Achenbach, S., Wells, G., Mappes, T., and Mohr, J., 2008. "Stiction issues and actuation of rf liga-mems variable capacitors". Mi-crosystem Technologies, 14(9-11), pp. 1709-1714.
24. Ranganathan, R., Sivakumar, G., Gale, R., and Dallas, T., 2009. "Characterization of stiction accrual in a mems". Journal of Microelectromechanical Systems, 18(5), pp. 1149-1159.
25. Zaghloul, U., Bhushan, B., Pons, P., Papaioannou, G., Coccetti, F., and Plana, R., 2011. "Nanoscale characterization of different stiction mechanisms in electrostatically driven mems devices based on adhesion and friction measurements". Journal of Colloid and Interface Science, 358(1), pp. 1-13.
26. Liu, Y., and Zhang, Y., 2012. "Stiction of flexural mems structures". Applied Mechanics and Materials, 190-191, pp. 794-800.
27. Zhang, Y., and Zhao, Y.-P., 2012. "Flexural contact in mems stiction". International Journal of Solids and Struc-tures, 49(17), pp. 2203-2214.
28. Tian, W., and Zhao, L., 2013. "Md simulation of mems "stiction" and "snap-back" phenomena". Key Engineering Materials, 562-565, pp. 1177-1181.
29. Kim, M.-W., Song, Y.-H., Yang, H.-H., and Yoon, J.-B., 2013. "An ultra-low voltage mems switch using stictionrecovery actuation". Journal of Micromechanics and Mi-croengineering, 23(4).
30. Balucani, M., Belfiore, N. P., Crescenzi, R., and Verotti, M., 2010. "The development of a mems/nems-based 3 d.o.f. compliant micro robot". In 19th International Workshop on Robotics in Alpe-Adria-Danube Region, RAAD 2010-Proceedings, pp. 173-179. eid=2-s2.0-77956053302.
31. Balucani, M., Belfiore, N. P., Crescenzi, R., Genua, M., and Verotti, M., 2011. "Developing and modeling a plane 3 dof compliant micromanipulator by means of a dedicated mbs code". In Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011, Vol. 2, pp. 659-662. eid=2-s2.0-81455140088.
32. Belfiore, N., Balucani, M., Crescenzi, R., and Verotti, M., 2012. "Performance analysis of compliant mems parallel robots through pseudo-rigid-body model synthesis". In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, Vol. 3, pp. 329-334.
33. Nenzi, P., Crescenzi, R., Dolgyi, A., Klyshko, A., Bondarenko, V., Belfiore, N. P., and Balucani, M., 2012. "High density compliant contacting technology for integrated high power modules in automotive applications". In Proceedings-Electronic Components and Technology Conference, pp. 1976-1983. eid=2-s2.0-84866879226.
34. Belfiore, N. P., Di Giamberardino, P., Rudas, I. J., and Verotti, M., 2010. "Isotropy in any rr planar dyad under active joint stiffness regulation". In 19th International Workshop on Robotics in Alpe-Adria-Danube Region, RAAD 2010-Proceedings, pp. 219-224.
35. Belfiore, N. P., Verotti, M., Di Giamberardino, P., and Rudas, I. J., 2012. "Active joint stiffness regulation to achieve isotropic compliance in the euclidean space". Jour-nal of Mechanisms and Robotics, 4(4), pp. 041010 1-11.
36. Belfiore, N. P., and Simeone, P., 2013. "Inverse kinetostatic analysis of compliant four-bar linkages". Mechanism and Machine Theory, 69, pp. 350-372.
37. Belfiore, N. P., EmamiMeibodi, M., Verotti, M., Crescenzi, R., and adn P. Nenzi, M. B., 2013. "Kinetostatic optimization of a memsbased compliant 3 dof plane parallel platform". In IEEE 9th International Conference on Computational Cybernetics, ICCC 2013, IEEE, pp.-. Tihany, Hungary.
38. Belfiore, N. P., Verotti, M., Crescenzi, R., and Balucani, M., 2013. "Design, optimization and construction of MEMSBased micro grippers for cell manipulation". In IEEE International Conference on System Science and Engineering, ICSSE 2013, IEEE, p.. Budapest, Hungary.
39. Pennestri, E., and Belfiore, N. P., 1994. "Modular thirdorder analysis of planar linkages with applications". In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, Vol. 70-1, pp. 99-103. eid=2-s2.0-0028561388.
40. Pennestri, E., and Belfiore, N. P., 1995. "On the numerical computation of generalized burmester points". Meccanica, 30(2), pp. 147-153. eid=2-s2.0-34249754180.