Two-Dimensional X-Ray Diffraction

Two-Dimensional X-Ray Diffraction

Volumn , Issue , 2009, Pages 1-426

  He, Bob B ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84889492297     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470502648     Document Type: Book

References (464)

1. A. Michette and S. Pfauntsch, X-Ray: The First Hundred Years, JohnWiley& Sons, Inc., New York, 1996.
2. B. D. Cullity, Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley, Reading, MA, 1978.
3. B. E. Warren, X-Ray Diffraction, Dover Publications, New York, 1990.
4. R. Jenkins and R. L. Snyder, Introduction to X-Ray Powder Diffractometry, JohnWiley& Sons, Inc., New York, 1996.
5. A. J. C.Wilson, International Tables for Crystallography, Kluwer Academic Publishers, Boston, MA, 1995.
6. F. D. Bloss, Crystallography and Crystal Chemistry, Holt, Rinehart and Winston, New York, 1971.
7. F. C. Phillips, An Introduction to Crystallography, John Wiley & Sons, Inc., New York, 1972.
8. T. C.W. Mak and G.-D. Zhou, Crystallography in Modern Chemistry, JohnWiley&Sons, Inc., New York, 1997.
9. C. Giacovazzo, et al., Fundamentals of Crystallography, IUCR and Oxford University Press, New York, 1992.
10. D. E. McRee, Practical Protein Crystallography, Academic Press, San Diego, CA, 1993, pp. 84-86.
11. P. R. Rudolf and B. G. Landes, Two-dimensional X-ray diffraction and scattering of microcrystalline and polymeric materials, Spectroscopy 1994, 9(6), 22-33.
12. J. Formica, X-ray diffraction, Handbook of Instrumental Techniques for Analytical Chemistry, edited by F. Settle, Prentice-Hall, New Jersey, 1997.
13. N. F. M. Henry, H. Lipson, and W. A. Wooster, The Interpretation of X-Ray Diffraction Photographs, St. Martin's Press, New York, 1960.
14. H. Lipson and H. Steeple, Interpretation of X-Ray Powder Diffraction Patterns, St. Martin's Press, New York, 1970.
15. S. N. Sulyanov, A. N. Popov, and D. M. Kheiker, Using a two-dimensional detector for X-ray powder diffractometry, J. Appl. Crystallogr. 1994, 27, 934-942.
16. B. B. He, Introduction to two-dimensional X-ray diffraction, Powder Diffr. 2003, 18(2), 71-85.
17. H. J. Bunge and H. Klein, Determination of quantitative, high-resolution pole-figures with the area detector, Z. Metallkd. 1996, 87(6), 465-475.
18. K. L. Smith and R. B. Ortega, Use of a two-dimensional, position sensitive detector for collecting pole figures, Adv. X-Ray Anal. 1993, 36, 641-647.
19. B. B. He and K. L. Smith, Strain and stress measurement with two-dimensional detector, Adv. X-Ray Anal. 1997, 41, 501-508.
20. B. B. He and K. L. Smith, Fundamental equation of strain and stress measurement using 2D detectors, Proceedings of 1998 SEM Spring Conference on Experimental and Applied Mechanics, Houston, TX, 1998.
21. B. B. He, U. Preckwinkel, and K. L. Smith, Advantages of using 2D detectors for residual stress measurement, Adv. X-Ray Anal. 1998, 42, 429-438.
22. R. W. Hendricks, The ORNL 10-meter small-angle X-ray scattering camera, J. Appl. Crystallogr. 1978, 11, 15-30.
23. T. Furuno, H. Sasabe, and A. Ikegami, A small-angle X-ray camera using a twodimensional multiwire proportional chamber, J. Appl. Crystallogr. 1987, 20, 16-22.
24. R. G. Tissot, Microdiffraction applications utilizing a two-dimensional detector, Powder Diffr. 2003, 18(2), 86-90.
25. N. S. P. Bhuvanesh and J. H. Reibenspies, Anovel approach to micro-sample X-ray powder diffraction using nylon loops, J. Appl. Crystallogr. 2003, 36, 1480-1481.
26. B. B. He, Microdiffraction using two-dimensional detectors, Powder Diffr. 2004, 19(2), 110-118.
27. B. He, K. Xu, F.Wang, and P. Huang, Two-dimensional X-ray diffraction for structure and stress analysis, ICRS-7 Proceeding, Mater. Sci. Forum 2005, 490-491, 1-6.
28. B. B. He, Measurement of residual stresses in thin films by two-dimensional XRD, Proceedings of the 7th European Conference on Residual Stresses, Berlin, Germany, September 13-15, 2006.
29. M. Schmidbauer, et al., A novel multi-detection technique for three-dimensional reciprocal-space mapping in grazing-incidence X-ray diffraction, J. Synchrotron Radiat. 2008, 15, 549-557.
30. M. Schmidbauer, et al., A novel multi-detection technique for three-dimensional reciprocal-space mapping in grazing-incidence X-ray diffraction, J. Synchrotron Radiat. 2008, 15, 549-557.
31. J. Lein, et al., Combinatorial material libraries on the microgram scale with an example of hydrothermal synthesis, Angew. Chem., Int. Ed. Engl. 1998, 37(24), 3369-3372.
32. B. B. He, et al., XRDrapid screening system for combinatorial chemistry, Adv. X-Ray Anal. 2001, 44, 1-5.
33. W. Kugler, X-ray diffraction analysis in the forensic science: the last resort in many criminal cases, Adv. X-Ray Anal. 2003, 46, 1-16.
34. W. Kugler, Application of X-ray diffraction in the forensic science institute of the Landeskriminalamt Baden-Wuerttemberg, Germany, handout to a Workshop at NYPD Crime Laboratory, New York, May 25, 2004.
35. L. Bertrand, et al., Microbeam synchrotron imaging of hairs from Ancient Egyptian mummies, J. Synchrotron Radiat. 2003, 10, 387-392.
36. W. Wagermaier, et al., Scanning texture analysis of lamellar bone using microbeam synchrotron X-ray radiation, J. Appl. Crystallogr. 2007, 40, 115-120.
37. B. B. He, Introduction to two-dimensional X-ray diffraction, Powder Diffr. 2003, 18(2), 71-85.
38. W. Busing and H. A. Levy, Angle calculations for 3- and 4-circle X-ray and neutron diffractometers, Acta Crystallogr. 1967, 22, 457-464.
39. W. R. Massey Jr. and P. C. Manor, A four-circle single crystal diffractometer with a rotating anode source, J. Appl. Crystallogr. 1976, 9, 119-125.
40. D. J. Thomas, Modern equations of diffractometry. Goniometry, Acta Crystallogr. 1990, A46, 321-343.
41. D. J. Thomas, Modern equations of diffractometry. Diffraction geometry, Acta Crystallogr. 1992, A48, 134-158.
42. M. Lohmeier and E. Vlieg, Angle calculations for a six-circle surface X-ray diffractometer, J. Appl. Crystallogr. 1993, 26, 706-716.
43. E. Vlieg, Integrated intensities using a six-circle surface X-ray diffractometer, J. Appl. Crystallogr. 1997, 30, 532-543.
44. P. Dera and A. Katrusiak, Towards general diffractometry. I. Normal-beam equatorial geometry, Acta Crystallogr. 1998, A54, 653-660.
45. H. You, Angle calculations for a '4S {thorn} 2D' six-circle diffractometer, J. Appl. Crystallogr. 1999, 32, 614-623.
46. P. Dera and A. Katrusiak, Towards general diffractometry. II. Unrestricted normal-beam equatorial geometry, J. Appl. Crystallogr. 1999, 32, 193-196.
47. G. Thorkildsen, R. H. Mathiesen, and H. B. Larsen, Angle calculations for a six-circle k diffractometer, J. Appl. Crystallogr. 1999, 32, 943-950.
48. P. Dera and A. Katrusiak, Towards general diffractometry. III. Beyond the normal-beam geometry, J. Appl. Crystallogr. 2001, 34, 27-32.
49. G. Thorkildsen, H. B. Larsenb, and J. A. Beukes, Angle calculations for a three-circle goniostat, J. Appl. Crystallogr. 2006, 39, 151-157.
50. S. Hanna and A. H. Windle, A novel polymer fibre diffractometer, based on a scanning X-ray-sensitive charge-coupled device, J. Appl. Crystallogr. 1995, 28, 673-689.
51. M. Schmidbauer, et al., A novel multi-detection technique for three-dimensional reciprocal-space mapping in grazing-incidence X-ray diffraction, J. Synchrotron Radiat. 2008, 15, 549-557.
52. D.-M. Smilgies and D. R. Blasini, Indexation scheme for oriented molecular thin films studied with grazing-incidence reciprocal-space mapping, J. Appl. Crystallogr. 2007, 40, 716-718.
53. S. T. Mudie, et al., Collection of reciprocal space maps using imaging plates at the Australian National Beamline Facility at the Photon Factory, J. Synchrotron Radiat. 2004, 11, 406-413.
54. H. P. Klug and L. E. Alexander, X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials, John Wiley & Sons, Inc., New York, 1974, 58-119.
55. B. D. Cullity, Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley, Reading, MA, 1978.
56. A. C. Bloomer and U. W. Arndt, Experiences and expectations of a novel X-ray microsource with focusing mirror. I, Acta Crystallogr. 1999, D55, 1672-1680.
57. J. Wiesmann, J. Graf, C. Hoffmann, and C. Michaelsen, New possibilities for X-ray diffractometry, Physics Meets Industry, edited by J. Gegner and F. Haider, Expert Verlag, 2007.
58. U. W. Arndt, et al., Focusing mirrors for use with microfocus X-ray Tubes, J. Appl. Crystallogr. 1998, 31, 733-741.
59. U. W. Arndt, Focusing optics for laboratory sources in X-ray crystallography, J. Appl. Crystallogr. 1990, 23, 161-168.
60. R. Jenkins and R. L. Snyder, Introduction to X-Ray Powder Diffractometry, JohnWiley& Sons, Inc., New York, 1996.
61. C. Giannini and L. Tapfer, A high-resolution multiple-crystal monochromator for X-ray diffraction studies, J. Appl. Crystallogr. 1996, 29, 230-235.
62. M. Servidori, X-ray monochromator combining high resolution with high intensity, J. Appl. Crystallogr. 2002, 35, 41-48.
63. H. St€ocker, K. K. Reuter, and D. C. Meyer, Si(511) channel cut for monochromatization and linear polarization of X-rays, J. Appl. Crystallogr. 2007, 40, 635-636.
64. B. B. He, Microdiffraction using two-dimensional detectors, Powder Diffr. 2004, 19(2).
65. B. B. He and U. Preckwinkel, X-ray optics for two-dimensional X-ray diffraction, Adv. X-Ray Anal. 2002, 45, 332-337.
66. L. Jiang, Z. Al-Mosheky, and N. Grupido, Basic principle and performance characteristics of multilayer beam conditioning optics, Powder Diffr. 2002, 17(2).
67. C. Michaelsen, J. Wiesmann, C. Hoffmann, A. Oehr, A. B. Storm, and L. J. Seijbel, Optimized performance of graded multilayer optics for X-ray single-crystal diffraction, Proceedings of SPIE, Vol. 5193, 2004, pp. 211-219.
68. A. B. Storm, C. Michaelsen, A. Oehr, and C. Hoffmann, Multilayer optics for Mo-radiation-based crystallography, Proceedings of SPIE, Vol. 5537, 2004, pp. 177-181.
69. C. Michaelsen, J.Wiesmann, K.Wulf, L. Brugemann, and A. Storm, Recent developments of multilayer X-ray optics for laboratory X-ray instrumentation, Proceedings of SPIE, Vol. 4782, 2002, pp. 143-151.
70. M. Schuster and H. G€obel, Graded-spacing multilayers for X-ray diffraction applications, Adv. X-Ray Anal. 1996, 39, 57-71.
71. P. Kirkpatrick and A. V. Baez, Formation of optical images by X-rays, J. Opt. Sci. Am. 1948, 38, 766.
72. M. Montel, The X-ray microscope with catamegonic roof-shaped objective, X-Ray Microscope and Microradiography, Elsevier, Amsterdam, 1953, p. 177.
73. P. J. Schields, I. Y. Ponomarev, N. Gao, and R. B. Ortega, Comparison of diffraction intensity using a monocapillary optic and pinhole collimators in a microdiffractometer with a curved image-plate, Powder Diffr. 2002, 17(2), 94-98.
74. C. A. MacDonald, S. M. Owens, and W. M. Gibson, Polycapillary X-ray optics for microdiffraction, J. Appl. Crystallogr. 1999, 32, 160-167.
75. P. J. Schields, D. M. Gibson, W. M. Gibson, N. Gao, H. Huang, and I. Y. Ponomarev, Overview of polycapillary X-ray optics, Powder Diffr. 2002, 17(2), 70-80.
76. T. N. Blanton, X-ray films as a two-dimensional detector for X-ray diffraction analysis, Powder Diffr. 2003, 18(2), 91-98.
77. H. P. Klug and L. E. Alexander, X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials, John Wiley & Sons, Inc., New York, 1974.
78. H. Johns, Aerospace: the aircraft gas turbine industry, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 129-178.
79. B. D. Cullity, Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley, Reading, MA, 1978.
80. R. Jenkins and R. L. Snyder, Introduction to X-Ray Powder Diffractometry, JohnWiley& Sons, Inc., New York, 1996.
81. G. Gandolfi, Discussion upon methods to obtain X-ray powder patterns from a single crystal, Mineral. Petrog. Acta. 13, 67-74, 1967.
82. R. W. Hendricks, An incident-beam ionization chamber and charge integration system for stabilization of X-ray diffraction experiments, J. Appl. Crystallogr. 1972, 6, 129.
83. M. Manther an W. Parrish, Energy dispersive X-ray diffractometry, Adv. X-Ray Anal. 1976, 20, 1-186.
84. R. D. Luggar, M. J. Farquharson, J. A. Horrocks, and R. J. Lacey, Multivariate analysis of statistically poor EDXRD spectra for the detection of concealed explosives, X-Ray Spectrom. 1998, 27(2), 87-94.
85. D. L. Bish and S. J. Chipera, Comparison of a solid-state Si detector to a conventional scintillation detector-monochromator system in X-ray diffraction analysis, Powder Diffr. 1989, 4(3).
86. M. Stanton, et al., The detective quantum efficiency of CCD and vidicon-based detectors for X-ray crystallographic applications, J. Appl. Crystallogr. 1992, 25, 638-645.
87. N. M. Allinson, Development of non-intensified charge-coupled device area X-ray detectors, J. Synchrotron Radiat. 1994, 1, 54-62.
88. D. A. Gedcke, How counting statistics controls detection limits and peak precision, ORTEC Application Note AN59, 2001.
89. M. R. James and J. B. Cohen, Geometrical problems with a position-sensitive detector employed on a diffractometer, including its use in the measurement of stress, J. Appl. Crystallogr. 1979, 12, 339-345.
90. H. E. G€obel, The use and accuracy of continuously scanning position-sensitive detector data in X-ray powder diffraction, Adv. X-Ray Anal. 1980, 24, 123-138.
91. S. K. Byram, et al., A novel X-ray powder diffractometer detector system, Adv. X-Ray Anal. 1976, 20, 529-545.
92. E. R. Wolfel, A novel curved position-sensitive proportional counter for X-ray diffractometry, J. Appl. Crystallogr. 1983, 16, 341-348.
93. L. Castex, J. L. Lebrun, and S. Bras, A new model of X-ray position sensitive detector developed in France, Adv. X-Ray Anal. 1980, 24, 139141.
94. A. Kinne, et al., Image plates as one-dimensional detectors in high-resolution X-ray diffraction, J. Appl. Crystallogr. 1998, 31, 446-452.
95. U.W. Arndt, X-ray position-sensitive detectors, J. Appl. Crystallogr. 1986, 19, 145-163.
96. R. Durst, et al., Readout structure and technique for electron cloud avalanche detectors, U.S. Patent 6,340,819, January 22, 2002.
97. D. M. Khazins, B. L. Becker, Y. Diawara, R. D. Durst, B. B. He, S. A. Medved, V. Sedov, and T. A. Thorson, A parallel-plate resistive-anode gaseous detector for X-ray imaging, IEEE Trans. Nucl. Sci. 2004, 51(3), 943-947.
98. L. Br€ugemann, et al., New detector technology for super speed X-ray diffraction, The 3rd Symposium on Pharmaceutical Powder X-Ray Diffraction, ICDD, February 2000.
99. L. Br€ugemann, et al., VANTEC-1 hot humidity studies in parallel beam geometry, Bruker AXS Lab Report XRD53, 2004.
100. C. Ponchut, Characterization of X-ray area detectors for synchrotron beamlines, J. Synchrotron Radiat. 2006, 13, 195-203.
101. E. M.Westbrook, Performance characteristics needed for protein crystal diffraction X-ray detectors, Proceedings of SPIE, 1999, 3774, 2-16.
102. M. O. Eatough, et al., A comparison of detectors used for microdiffraction applications, Adv. X-Ray Anal. 1997, 41, 319-326.
103. A. C. Thompson, et al., X-Ray Data Booklet, 2nd ed., Center for X-Ray Optics and Advanced Light Source, LBNL, Berkeley, CA, 2001.
104. D. Bourgeois, J. P. Moy, S.O. Svensson, and A. Kvick, The Point-spread function of X-ray image-intensifiers/CCD-camera and imaging-plate systems in crystallography: assessment and consequences for the dynamic range, J. Appl. Crystallogr. 1994, 27, 868-877.
105. H. Fujita et al., A simple method for determining the modulation transfer function in digital radiography, IEEE Trans. Med. Imaging 1992, 11, 34-39.
106. R. Lewis, Multiwire gas proportional counters: decrepit antiques or classic performers, J. Synchrotron Radiat. 1994, 1, 43-53.
107. R. W. Hendricks, The ORNL 10-meter small-angle X-ray scattering camera, J. Appl. Crystallogr. 1978, 11, 15-30.
108. R. Hamlin, et al., Characteristics of a flat multiwire area detector for protein crystallography, J. Appl. Crystallogr. 1981, 14, 85-93.
109. C. R. Desper, An area-imaging proportional counter for X-ray diffraction, Adv. X-Ray Anal. 1980, 24, 161-166.
110. Z. Derewenda and J. R. Helliwell, Calibration tests and use of a Nicolet/Xentronics imaging proportional chamber mounted on a conventional source for protein crystallography, J. Appl. Crystallogr. 1989, 22, 123-137.
111. I. Tanaka, et al., An automatic diffraction data collection system with an imaging plate, J. Appl. Crystallogr. 1990, 23, 334-339.
112. H. Iwasaki, et al., Time-resolved two-dimensional observation of the change in X-ray diffuse scattering from an alloy single crystal using an imaging plate on a synchrotronradiation source, J. Appl. Crystallogr. 1990, 23, 509-514.
113. K. Krause, Experience with commercial area detectors: a "buyer's perspective, J. Appl. Crystallogr. 1992, 25, 146-154.
114. N. Kamiya and H. Iwasaki, Development of a new imaging-plate diffractometer (IPD-WAS) for time-resolved crystallography with a laboratory X-ray source, J. Appl. Crystallogr. 1995, 28, 745-752.
115. M. Thoms, et al., An improved X-ray image plate detector for diffractometry, Mater. Sci. Forum 1996, 228-231, 107-112.
116. R. W. Ryon, et al., X-ray imaging: status and trends, Adv. X-Ray Anal. 1987, 31, 35-52.
117. T. N. Blanton, X-ray diffraction orientation studies using two-dimensional detectors, Adv. X-Ray Anal. 1993, 37, 367-373.
118. M. W. Tate, et al., A large-format high-resolution area X-ray detector based on a fiberoptically bonded charge-coupled device (CCD), J. Appl. Crystallogr. 1995, 28, 196-205.
119. R. Durst, The design and characterization of CCD-based X-ray detectors for crystallography, Bruker AXS Technical Note SCD 5, DOC-T86-EXS005, 2008.
120. V. Valdna and R. D. Durst, High efficiency polycrystalline phosphors and method of making same, U.S. Patent 6,254,806, 2001.
121. F. Sauli, GEM: a new concept for electron amplification in gas detectors, Nucl. Instrum. Methods 1997, A386, 531.
122. A. Oed, Position sensitive detector with microstrip anode for electron multiplication with gases, Nucl. Instrum. Methods 1988, A263, 351.
123. F. Aangelini, et al., The micro-gap chamber, Nucl. Instrum. Methods 1993, A335, 69.
124. F. Bartol, et al., TheCAT. Pixel proportional gas counter detector, J. Phys. III France 1996, 6, 337.
125. Y. Giomatartis, Development and prospects of the new gaseous detector "Micromegas", Nucl. Instrum. Methods 1998, A419, 239.
126. Y. Diawara, et al., Novel, photon counting detectors for X-ray diffraction applications, Proceedings of SPIE, 2002, 4784, 358-364.
127. R. D. Durst, C. Campana, B. He, and J. Phillips, The use of CCD detectors for X-ray diffraction-invited, The 47th Annual Denver X-Ray Conference, Colorado Springs, CO, August 3-7, 1998.
128. W. Busing and H. A. Levy, Angle calculations for 3- and 4-circle X-ray and neutron diffractometers, Acta Crystallogr. 1967, 22, 457-464.
129. W. R. Massey Jr. and Philip C. Manor, A four-circle single crystal diffractometer with a rotating anode source, J. Appl. Crystallogr. 1976, 9, 119-125.
130. D. J. Thomas, Modern equations of diffractometry. Goniometry, Acta Crystallogr. 1990, A46, 321-343.
131. M. Lohmeier and E. Vlieg, Angle calculations for a six-circle surface X-ray diffractometer, J. A.ppl Crystallogr. 1993, 26, 706-716.
132. E. Vlieg, Integrated intensities using a six-circle surface X-ray diffractometer, J. Appl. Crystallogr. 1997, 30, 532-543.
133. P. Dera and A. Katrusiak, Towards general diffractometry. I. Normal-beam equatorial geometry, Acta Crystallogr. 1998, A54, 653-660.
134. G. Thorkildsen, H. B. Larsenb, and J. A. Beukes, Angle calculations for a three-circle goniostat, J. Appl. Crystallogr. 2006, 39, 151-157.
135. N. S. P. Bhuvanesh and J. H. Reibenspies, Anovel approach to micro-sample X-ray powder diffraction using nylon loops, J. Appl. Crystallogr. 2003, 36, 1480-1481.
136. S. Guggenheim, Simulations of Debye-Scherrer and Gandolfi patterns using a Bruker Smart Apex diffractometer system, Bruker AXS Application Note 373. 2005.
137. M. F. Davis, C. Groter, and H. F. Kay, On choosing off-line automatic X-ray diffractometers, J. Appl. Crystallogr. 1968, 1, 209-217.
138. R. Sanishvili, A 7 mm mini-beam improves diffraction data from small or imperfect crystals of macromolecules, Acta Crystallogr. 2008, D64, 425-435.
139. I. C. Noyan, et al., Acost-effective method for minimizing the sphere-of-confusion error of X-ray diffractometers, Rev. Sci. Instrum. 1999, 70, 1300-1304.
140. R. Moukhametzianov, et al., Protein crystallography with a micrometre-sized synchrotronradiation beam, Acta Crystallogr. 2008, D64, 158-166.
141. J. P. Cline, NIST standard reference materials for characterization of instrument performance, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 903-917.
142. B. B. He and R. C. Bollig, X-ray diffraction screening system convertible between reflection and transmission modes, US Patent 7,242,745, July 10, 2007.
143. J. Fink, et al., X-ray micro diffractometer sample positioner,US Patent 5,359,640, October 25, 1994.
144. S. T. Misture, E. A. Payzant, and C. R. Hubbard, Handout of high temperature XRD workshop, The 47th Annual Denver X-ray Conference, August 4, 1998.
145. M. Rodriguez, High-temperature and nonambient X-ray diffraction, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 891-902.
146. L. J. Farrugia, P. Macchi, and A. Sironi, Reversible displacive phase transition in [Ni(en)3]2{thorn}(NO3-)2: a potential temperature calibrant for area-detector diffractometers, J. Appl. Crystallogr. 2003, 36, 141-145.
147. L. Br€ugemann, et al., VANTEC-1 hot humidity studies in parallel beam geometry, Bruker AXS Lab Report XRD53, 2004.
148. R. Resel, Aheating stage up to 1173Kfor X-ray diffraction studies in the whole orientation space, J. Appl. Crystallogr. 2003, 36, 80-85.
149. L. Bruegemann, High temperature investigations with the D8 DISCOVER using the DHS 900, Bruker AXS Inc., Lab Report XRD 40, 2001.
150. STC-Eulerian cradle-special temperature chamber with hemispherical berylliumwindow for direct sample heating up to 1200°C in high vacuum, Materials Research Instruments (MRI), www.mri-gmbh.de, June 2002.
151. L. F. Connell Jr. and J. H. Gammel, Hysteresis ranges of polymorphic transitions of some crystals, Acta Crystallogr. 1950, 3, 75.
152. W. Ostertag and G. Fischer, Temperature measurements with metal ribbon high temperature X-ray furnaces, Rev. Sci. Instrum. 1968, 39, 888.
153. B. B. He and K. Klitzke, High-temperature attachment installation manual, Bruker AXS Inc., DOC-269-021902, 2001.
154. S. N. Sulyanov, A. N. Popov, and D. M. Kheiker, Using a two-dimensional detector for X-ray powder diffractometry, J. Appl. Crystallogr. 1994, 27, 934-942.
155. S. Scheidegger,A. Estermann, and W. Steurer, Correction of specimen absorption in X-ray diffuse scattering experiments with area-detector systems, J. Appl. Crystallogr. 1999, 33, 35-48.
156. A. Cervellino, et al., Folding a two-dimensional powder diffraction image into a onedimensional scan: a new procedure, J. Appl. Crystallogr. 2006, 39, 745-748.
157. P. Boesecke, Reduction of two-dimensional small- and wide-angle X-ray scattering data, J. Appl. Crystallogr. 2007, 40, 423-427.
158. R. Jenkins and R. L. Snyder, Introduction to X-Ray Powder Diffractometry, JohnWiley& Sons, Inc., New York, 1996. pp. 319-320.
159. ICDD, Release 2007 of the Powder Diffraction File, http://www.icdd.com, 2008.
160. P. R. Rudolf and B. G. Landes, Two-dimensional X-ray diffraction and scattering of microcrystalline and polymeric materials, Spectroscopy 1994, 9(6), 22-33.
161. A. Fujiwara, et al., Synchrotron radiation X-ray powder diffractometer with a cylindrical imaging plate, J. Appl. Crystallogr. 2000, 33, 1241-1245.
162. B. B. He, Introduction to two-dimensional X-ray diffraction, Powder Diffr. 2003, 18(2), 71-90.
163. G. Ning and R. L. Flemming, Rietveld refinement of LaB6: data from mXRD, J. Appl. Crystallogr. 2005, 38, 757-759.
164. M. W. Tate, et al., A large-format high-resolution area X-ray detector based on a fiberoptically bonded charge-coupled device (CCD), J. Appl. Crystallogr. (1995), 28, 196-205.
165. M. Stanton, et al., Correcting spatial distortions and nonuniform response in area detectors, J. Appl. Crystallogr. 1992, 25, 549-558.
166. J. P. Moy, A novel technique for accurate intensity calibration of area X-ray detectors at almost arbitrary energy, J. Synchrotron Radiat. 1996, 3, 1-5.
167. B. B. He, Test report on Hi-Star calibration with glassy Fe foil, Bruker AXS, April 23, 1997.
168. J.W.Campbell, Spatial-distortioncorrections, forLauediffractionpatternsrecordedonimage plates, modeled using polynomial functions, J. Appl. Crystallogr. (1995), 28, 43-48.
169. Z. Derewenda and J. R. Helliwell, Calibration tests and use of a Nicolet/Xentronics imaging proportional chamber mounted on a conventional source for protein crystallography, J. Appl. Crystallogr. 1989, 22, 123-137.
170. Bruker AXS, General Area Detector Diffraction Software (GADDS) Reference Manual, DOC-269-017203, May, 1996.
171. A. B. Rodriguez-Navarro, XRD2DScan: new software for polycrystalline materials characterization using two-dimensional X-ray diffraction, J. Appl. Crystallogr. 2006, 39, 905-909.
172. J. E. Bresenham, Algorithm for computer control of a digital plotter, IBM Syst. J. 1965, 4(1), 25-30.
173. B. D.Cullity, Elements of X-RayDiffraction, 2nd ed., Addison-Wesley,Reading,MA, 1978.
174. H. P. Klug and L. E. Alexander, X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed., John Wiley & Sons, Inc., New York, 1974.
175. O. Robach, et al., Corrections for surface X-ray diffraction measurements using the Z-axis geometry: finite size effects in direct and reciprocal space J. Appl. Crystallogr. 2000, 33, 1006-1018.
176. D. J. Thomas, Modern equations of diffractometry: diffraction geometry, Acta Crystallogr. 1992, A48, 134-158.
177. L. V. Azaroff, Polarization correction for crystal-monochromatized X-radiation, Acta Crystallogr. 1955, 8, 701.
178. C. Giacovazzo, et al., Fundamentals of Crystallography, Oxford Science, New York, 1992.
179. K. A. Kerr and J. P. Ashmore, Systematic errors in polarization corrections for crystalmonochromatized radiation, Acta Crystallogr. 1974, A30, 176.
180. M. Polentarutti, R. Glazerb, and K. D. Carugo, Ahelium-purged beam path to improve soft and softer X-ray data quality, J. Appl. Crystallogr. 2004, 37, 319-324.
181. M. Krieger, et al., Data collection in protein crystallography: capillary effects and background corrections, Acta Crystallogr. 1974, A30, 740.
182. M. Krieger and R. M. Stroud, Data collection in protein crystallography: experimental methods for reducing background radiation, Acta Crystallogr. 1976, A32, 653.
183. R. W. Alkire, et al., Re-thinking the role of the beamstop at a synchrotron-based protein crystallography beamline, J. Appl. Crystallogr. 2004, 37, 836-840.
184. W. R. Busing and H. A. Levy, High-speed computation of the absorption correction for single crystal diffraction measurements, Acta Crystallogr. 1957, 10, 180.
185. E. N. Maslen, X-ray absorption, International Tables for Crystallography, Vol. C, edited by A. J. C. Wilson, IUCR by Kluwer Academic Publisher, 1992, 520-529.
186. S. Scheidegger, et al., Correction of specimen absorption in X-ray diffuse scattering experiments with area-detector systems, J. Appl. Crystallogr. 2000, 33, 35-48.
187. W. Pitschke, Absorption corrections of powder diffraction intensities recorded in transmission geometry, J. Appl. Crystallogr. 1996, 29, 561-567.
188. A. D. Zuev, Calculation of the instrumental function in X-ray powder diffraction, J. Appl. Crystallogr. 2006, 39, 304-314.
189. C. R. Ross II, Measurement of powder diffraction sample absorption coefficients using monochromated radiation and transmission geometry, J. Appl. Crystallogr. 1992, 25, 628-631.
190. R.M. F.Leal, et al., Absorption correction based on a three-dimensionalmodel reconstruction fromvisual images, J. Appl. Crystallogr. 2008, 41, 1-9, doi: 10.1107/S0021889808011898.
191. J. Collazo, et al., Microabsorption of X-rays in planar powder samples in the nonsymmetric reflection case, J. Appl. Crystallogr. 1997, 30, 312-319.
192. V. K. Pecharsky and P. Y. Zavalij, Fundamentals of Powder Diffraction and Structural Characterization of Materials, Kluwer Academic Publisher, 2003, 193-196.
193. M. E. Hilley (ed.), Residual Stress Measurement by X-Ray Diffraction, SAE J784a, Society of Automotive Engineers, Warrendale, PA, 1971, pp. 38-45.
194. R. Jenkins and R. L. Snyder, Introduction to X-Ray Powder Diffractometry, JohnWiley& Sons, Inc., New York, 1996, pp. 319-320.
195. ICDD, Release 2007 of the Powder Diffraction File, http://www.icdd.com, 2008.
196. P. R. Rudolf and B. G. Landes, Two-dimensional X-ray diffraction and scattering of microcrystalline and polymeric materials, Spectroscopy 1994, 9(6), 22-33.
197. S. N. Sulyanov, A. N. Popov, and D. M. Kheiker, Using a two-dimensional detector for X-ray powder diffractometry, J. Appl. Crystallogr. 1994, 27, 934-942.
198. A. Fujiwara, et al., Synchrotron radiation X-ray powder diffractometer with a cylindrical imaging plate, J. Appl. Crystallogr. 2000, 33, 1241-1245.
199. B. B. He, Introduction to two-dimensional X-ray diffraction, Powder Diffr. 2003, 18(2), 71-85.
200. G.W. Brindley, The X-Ray Identification and Crystal Structures of Clay Minerals, 2nd ed., edited by G. Brown, Mineralogical Society, 1961.
201. B. D. Cullity, Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley, Reading, MA, 1978.
202. V. K. Pecharsky and P. Y. Zavalij, Fundamental of Powder Diffraction and Structure Characterization of Materials, Kluwer Academic Publishers, Boston, MA, 2003.
203. Bruker AXS, DIFFRACplus SEARC software, http://www.bruker-axs.com.
204. MDI, JADE, http://www.materialsdata.com/products.htm.
205. The Collaborative Computational Projects (CCP14), http://www.ccp14.ac.uk.
206. G. Ning and R. L. Flemming, Rietveld refinement of LaB6: data from mXRD, J. Appl. Crystallogr. 2005, 38, 757-759.
207. B. He, X-ray diffraction from point-like imperfection, Ph.D. dissertation, Virginia Tech, 1992, 93-125.
208. B. He, S. Rao, and C. R. Houska, A simplified procedure for obtaining relative X-ray intensities when a texture and atomic displacements are present, J. Appl. Phys. 75(9), May 1994.
209. A. J. C. Wilson (ed.), International Tables for Crystallography, Vol. C: Mathematical, Physical and Chemical Tables, Kluwer Academic Publishers, Dordrecht, Netherlands, 1992.
210. M. A. Krivoglaz, Theory of X-Ray and Thermal-Neutron Scattering by Real Crystals, Plenum Press, New York, 1969, p. 234.
211. S. Scheidegger, et al., Correction of specimen absorption in X-ray diffuse scattering experiments with area-detector systems, J. Appl. Crystallogr. 2000, 33, 35-48.
212. B. J. Campbell, Elucidation of zeolite microstructure by synchrotron X-ray diffuse scattering, J. Appl. Crystallogr. 2004, 37, 187-192.
213. S. Guggenheim, Simulations of Debye-Scherrer and Gandolfi patterns using a Bruker Smart Apex diffractometer system, Bruker AXS Application Note 373, 2005.
214. J. P. Cline, NIST standard reference materials for characterization of instrument performance, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 903-917.
215. H. J. Bunge, Texture Analysis in Materials Science, Butterworth, London, 1983.
216. R. D. Angelis, et al., Quantitative description of fiber textures in cubic metals, Adv. X-Ray Anal. 2000, 42, 510-520.
217. R. J. Roe, Inversion of pole-figures for materials having cubic-crystal symmetry, J. Appl. Phys. 1966, 37, 2069.
218. S. Rao and C. R. Houska, Quantitative analysis of fiber texture in cubic films, J. Appl. Phys. 1983, 54, 1872.
219. H. J. Bunge and H. Klein, Determination of quantitative, high-resolution pole figures with the area detector, Z. Metallkd. 1996, 87(6), 465-475.
220. K. L. Smith and R. B. Ortega, Use of a two-dimensional, position sensitive detector for collecting pole figures, Adv. X-Ray Anal. 1993, 36, 641-647.
221. T. N. Blanton, X-ray diffraction orientation studies using two-dimensional detectors, Adv. X-Ray Anal. 1994, 37, 367-373.
222. K. Helmings, M. Lyubchenko, B. He, and U. Preckwinfel, A new method for texture measurements using a general area detector diffraction system, Powder Diffr. 2003, 18(2), 99-105.
223. B. B. He, K. Xu, F.Wang, and P. Huang, Two-dimensional X-ray diffraction for structure and stress analysis, Residual Stresses VII, Proceedings of the 7th International Conference on Residual Stresses, Xian, China, June 14-17, 2004, Mater. Sci. Forum 2005, 490-491, 1-6.
224. B. Bob He, Introduction to two-dimensional X-ray diffraction, Powder Diffr. 2003, 18(2).
225. H. R. Wenk and S. Grigull, Synchrotron texture analysis with area detectors, J. Appl. Crystallogr. 2003, 36, 1040-1049.
226. M. Birkholz, Thin Film Analysis by X-Ray Scattering, Wiley-VCH,Weinheim, 2006, pp. 191-195.
227. A. C. Rizzie, T. R.Watkins, and E. A. Payzant, Elaboration on the hexagonal grid and spiral trace schemes for pole figure data collection, Powder Diffr. 2008, 23(2).
228. H. J. Bunge, Texture Analysis in Materials Science, Butterworth, London, 1983.
229. H. J. Bunge and C. Esling (eds.) Advances and Applications of Quantitative Texture Analysis, DGM, Oberursel, 1991.
230. S. Matthies, H. R. Wenk, and G. W. Vinel, Some basic concepts of texture analysis and comparison of three methods to calculate orientation distributions from pole figures, J. Appl. Crystallogr. 1988, 21, 285-304.
231. A. X. S. Bruker, Texture Evaluation Program User's Manual, TEXEVAL 2.0, DOC-M85-E03010, November 2000.
232. R. M. Bozorth, The orientations of crystals in electrodeposited metals, Phys. Rev. 1925, 26, 390.
233. B. He, X-ray diffraction from point-like imperfection, Ph.D. dissertation, Virginia Tech, Blacksburg, VA, 1992, pp. 93-125.
234. B. He, S. Rao, and C. R. Houska, A simplified procedure for obtaining relative X-ray intensities when a texture and atomic displacements are present, J. Appl. Phys. 1994, 75(9), 4456-4464.
235. B. He, Application of two-dimensional X-ray diffraction, handout distributed in Denver X-Ray Conference Workshop on Two-Dimensional XRD, 2001, 2003, 2005, 2007.
236. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity, McGraw-Hill, New York, 1970.
237. I. C. Noyan and J. B. Cohen, Residual Stress, Spinger-Verlag, New York, 1987.
238. J. Lu, Handbook of Measurement of Residual Stress, The Fairmont Press, Lilburn, GA, 1996.
239. N. M. Walter, et al., Residual Stress Measurement by X-Ray Diffraction-SAE J784a, Society of Automotive Engineering, 1971.
240. E. J. Mittemeijer, The relation between residual macro- and microstresses and mechanical properties of case-hardened steels, Case-Hardened Steels: Microstructural and Residual Stress Effects, edited by D. E. Diesburg, TMS-AIME, Warrendale, PA, 1984, 161-187.
241. C. K. Lowe-Ma and M. J. Vinarcik, Selected applications of X-ray diffraction in the automotive industry, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, pp. 179-192.
242. A. P Voskamp and E. J. Mittemeijer, Residual stress development and texture formation during rolling contact loading, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, pp. 813-846.
243. S. I. Rao, B. He, and C. R. Houska, X-ray diffraction analysis of concentration and residual stress gradients in nitrogen-implanted niobium and molybdenum, J. Appl. Phys. 1991, 69 (12), 8111-8118.
244. M. R. James and J. B. Cohen, The measurement of residual stresses by X-ray diffraction techniques, Treatise on Materials Science and Technology, edited by H. Herman, Vol. 19, Part A, Academic Press, New York, 1980.
245. T. Adler and C. R. Houska, Simplifications in X-ray line-shape analysis, J. Appl. Phys. 1979, 50(5), 3282-3287.
246. C. R. Houska, Least-square analysis of X-ray diffraction line shapes with analytic functions, J. Appl. Phys. 1981, 52(2), 748-754.
247. R. Delhez, et al., Determination of crystallite size and lattice distortions through X-ray diffraction line profile analysis: recipes, methods and comments, Fresenius Z Anal Chem. 1982, 312, 1-16.
248. S. Rao and C. R. Houska, X-ray diffraction profiles described by refined analytical functions, Acta Crystallogr. 1986, A42, 14-19.
249. D. Balzar, Profile fitting of X-ray diffraction lines and Fourier analysis of broadening, J. Appl. Crystallogr. 1992, 25, 559-570.
250. R. W. Cheary and A. Coelho, A fundamental parameters approach to X-ray line-profile fitting, J. Appl. Crystallogr. 1992, 25, 109-121.
251. D. Balzar, et al., Size-strain line-broadening analysis of the ceria round-robin sample, J. Appl. Crystallogr. 2004, 37, 911-924.
252. prEN 15305:2005, Non-destructive Testing-Test Method for Residual Stress Analysis by X-Ray Diffraction, Draft European Standard, July 2005.
253. G. M. Borgonovi, Determination of residual stress from two-dimensional diffraction pattern, Nondestructive Methods for Material Property Determination, edited by C. O. Ruud and R. E. Green, Jr., Plenum Publishing Corporation, 1984, pp. 47-57.
254. G. M. Borgonovi and C. P. Gazzara, Stress measurement with two-dimensional real-time system, Adv. X-Ray Anal. 1989, 32, 397-406.
255. M. A. Korhonen, V. K. Lindroos, and L. S. Suominen, Application of a new solid state X-ray camera to stress measurement, Adv. X-Ray Anal. 1989, 32, 407-413.
256. Y. Yoshioka and S. Ohya, X-ray analysis of stress in a localized area by use of image plate, Adv. X-Ray Anal. 1992, 35, 537-543.
257. N. Fujii and S. Kozaki, Highly sensitive X-ray stress measurement in small area, Adv. X-Ray Anal. 1993, 36, 505-513.
258. Y. Yoshioka and S. Ohya, X-ray analysis of stress in a localized area by use of image plate, Proceedings of ICRS-4, Baltimore, MD, 1994.
259. B. B. He and K. L. Smith, A new method for residual stress measurement using an area detector, Proceedings of The Fifth International Conference on Residual Stresses (ICRS-5), edited by T. Ericsson, et al., Linkoping, Sweden, 1997, pp. 634-639.
260. B. B. He and K. L. Smith, Fundamental equation of strain and stress measurement using 2D detector, Proceedings of 1998 SEM Spring Conference on Experimental and Applied Mechanics, Houston, TX, 1998.
261. B. B. He, U. Preckwinkel, and K. L. Smith, Advantages of using 2D detectors for residual stress measurement, Adv. X-Ray Anal. 1998, 42, 429-438.
262. A.K€ampfe, et al., X-ray stress analysis on polycrystalline materials using two-dimensional detectors, Adv. X-Ray Anal. 1999, 43, 54-65.
263. B. B. HE, The 20th ASM Heat Treating Society Conference Proceedings, Vol. 1, St. Louis, Missouri, 2000, pp. 408-417.
264. B. B. He, Introduction to two-dimensional X-ray diffraction, Powder Diffr. 2003 18(2), 71-85.
265. M. Francois, Unified description for the geometry of X-ray stress analysis: proposal for a consistent approach, J. Appl. Crystallogr. 2008, 41, 44-55.
266. B. He, K. Xu, F. Wang, and P. Huang, Two-dimensional X-ray diffraction for structure and stress analysis, ICRS-7 Proceeding, Mater. Sci. Forum 2005, 490-491, 1-6.
267. T. Sasaki,Y. Kanematsu, and Y. Hirose, Determination of volume fraction of constituents in deformed stainless steel by means of image plate, ICRS-7 Proceeding, Mater. Sci. Forum 2005, 490-491, 190-193.
268. G. Geandier, et al., Benefits of two-dimensional detectors for synchrotron X-ray diffraction studies of thin film mechanical behavior, J. Appl. Crystallogr. 2008, 41, 1-13.
269. J. O. Almen, Shot blasting test, U.S. Patent 2350440, 1944.
270. R. A. Thompson, Almen strip, U.S. Patent 5731509, 1998.
271. B. B. He and K. L. Smith, Computer simulation of diffraction stress measurement with 2D detectors, Proceedings of 1998 SEM Spring Conference on Experimental and Applied Mechanics, Houston, TX, 1998.
272. H. P. Klug and L. E. Alexander, X-Ray Diffraction Procedures, JohnWiley & Sons, Inc., New York, 1974.
273. R. Delhez and E. J. Mittemeijer, An improveda2 elimination, J. Appl. Crystallogr. 1975, 8, 609-611.
274. W. Pfeiffer, The role of the peak locationmethod in X-ray stressmeasurement, Proceedings of the 4th International Conference on Residual Stresses, SEM,Bethel,CT, 1994, pp. 148-155.
275. J. M. Sprauel and H. Michaud, Global X-ray method for determination of stress profiles, Mater. Sci. Forum 2002, 404-407, 19-24.
276. W. Parrish, Powder and related techniques, International Tables for Crystallography, Vol. C, edited by A. J. C. Wilson, Kluwer Academic Publisher, 1992, pp. 42-79.
277. V. N. Naidu and C. R. Houska, Profile separation in complex powder patterns, J. Appl. Crystallogr. 1982, 15, 190-198.
278. P. T. Boggs and E. Prince, Least squares, International Tables for Crystallography, Vol. C, edited by A. J. C. Wilson, Kluwer Academic Publisher, 1992, pp. 594-604.
279. B. B. He, X. L. Wang, W. Tang, and Y. Chao, Stress mapping using a two-dimensional diffraction system, Proceedings of the SEM Annual Conference on Experimental and Applied Mechanics, Portland, OR, June 4-6, 2001, pp. 547-550.
280. W. M. Thomas, International Patent Application PCT/GB92/02203, June 10, 1993.
281. X. -L. Wang, et al., Neutron diffraction study of residual stresses in friction stir welds, Proceedings of the 6th International Conference on Residual Stresses, Oxford, UK, 2000.
282. I. J. Fiala and S. Nemecek, X-ray diffraction imaging as a tool of mesostructure analysis, Adv. X-Ray Anal. 2001, 44, 24-31.
283. I. C. Noyan, Defining residual stresses in thin film structure, Adv. X-Ray Anal. 1992, 35,461-473.
284. L. Yu, B. Hendrix, K. Xu, J. He, and H. Gu, X-ray residual stress measurement in thin films with crystallographic texture and grain shape, Mater. Res. Soc. Symp. Proc. 1996, 403, 171-182.
285. V. Hauk, Stress evaluation on materials having non-linear lattice strain distribution, Adv. X-Ray Anal. 1984, 27, 101-120.
286. P. Huang, K. Xu, B. He, and Y. Han, An investigation of residual stress of porous titania layer by micro-arc oxidation under different voltages, ICRS-7 Proceeding, Mater. Sci. Forum 2004, 490-491, 552-557.
287. B. B. He, Measurement of residual stresses in thin films by two-dimensional XRD, Proceedings of the 7th European Conference on Residual Stresses, Berlin, Germany, September 13-15, 2006.
288. I. Kraus and N. Ganev, Residual stress and stress gradients, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, pp. 793-811.
289. C. L. Azanza Ricardo, M. D'Incau, and P. Scardi, Revision and extension of the standard laboratory technique for X-ray diffraction measurement of residual stress gradients, J. Appl. Crystallogr. 2007, 40, 675-683.
290. V. Hauk and B. Kruger, A new approach to evaluate steep stress gradients principally using layer remove, Mater. Sci. Forum, 2000, 347-349, 80-82.
291. H. K.Tonshoff, J. Ploger, and H. Seegers, Determination of residual stress gradients in brittle materials using an improved spline algorithm, Mater. Sci. Forum, 2000, 347-349, 83-88.
292. J. Koo and J. Valgur, Layer growing/removing method for the determination of residual stresses in thin inhomogeneous discs, Mater. Sci. Forum, 2000, 347-349, 89-94.
293. B. D. Cullity, Elements of X-Ray Diffraction, Addison Wesley, Reading, MA, 1978.
294. General Motors, Statistical Process Control Manual, General Motors Corporation, Warren, MI, 1986, pp. 3-1-11.
295. J. W. Sinn, Introduction and overview of statistical process control, Proceeding of Electrical/Electronics Insulation Conference, Chicago, IL, October 1993, pp. 729-736.
296. C. S. Ackermann, Evaluating destructive measurements using gage R&R, Proceedings of 1993 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop, Boston, October 1993, pp. 101-105.
297. B. B. He, K. L. Smith, U. Preckwinkel, and W. Schultz, Micro-area residual stress measurement using a two-dimensional detector, Proceedings of the 5th European Conference on Residual Stresses, The Netherlands, September 28-30, 1999, Mater. Sci. Forum 2000, 347-349, 166-171.
298. B. B. He, K. L. Smith, U. Preckwinkel, and W. Schultz, Gage R&R study on residual stress measurement system with area detector, Proceedings of the 5th European Conference on Residual Stresses, The Netherlands, September 28-30, 1999, Mater. Sci. Forum 347-349, 2000, 101-106.
299. T. J. Kazmierski, Statistical Problem Solving in Quality Engineering, McGraw-Hill, New York, 1995.
300. A. Guinier and G. Fournet, Small-Angle Scattering of X-Rays, John Wiley & Sons, Inc., New York, 1955.
301. L. E. Alexander, X-Ray Diffraction Methods in Polymer Science, Krieger Publishing Company, Malabar, FL, 1985.
302. F. J. Baltá-Calleja and C. G. Vonk, X-Ray Scattering of Synthetic Polymers, Elsevier Science Publishing Company, New York, 1989.
303. G. Fritz and A. Bergmann, SAXS instruments with slit collimation: investigation of resolution and flu, J. Appl. Crystallogr. 2006, 39, 64-71.
304. O. Glatter, A new method for the evaluation of small-angle scattering data, J. Appl. Crystallogr. 1977, 10, 415-421.
305. O. Glatter, Small-angle techniques, International Tables for Crystallography, Vol. C, edited by A. J. C. Wilson, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1995, 89-112.
306. R. A. Register and S. L. Cooper, Smearing effects in 'pinhole' collimation with onedimensional detection, J. Appl. Crystallogr. 1988, 21, 550-557.
307. O. Glatter and O. Kratky, (eds), Small Angle X-Ray Scattering, Academic Press, New York, 1982.
308. H. P. Klug and L. E. Alexander, X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials,1st ed., John Wiley & Sons, Inc., New York, 1954.
309. R. W. Hendricks, The ORNL 10-meter small-angle X-ray scattering camera, J. Appl. Crystallogr. 1978, 11, 15-30.
310. J. Schelten and R. W. Hendricks, Recent developments in X-ray and neutron small-angle scattering instrumentation and data analysis, J. Appl. Crystallogr. 1978, 11, 297-324.
311. J. S. Higgins and R. S. Stein, Recent developments in polymer applications of small-angle neutron, X-ray and light scattering, J. Appl. Crystallogr. 1978, 11, 346-375.
312. T. Furuno, H. Sasabe, and A. Ikegami, A small-angle X-ray camera using a twodimensional multiwire proportional chamber, J. Appl. Crystallogr. 1987, 20, 16-22.
313. G. D. Wignall, J. S. Lin, and S. Spooner, Reduction of parasitic scattering in small-angle X-ray scattering by a three-pinhole collimating system, J. Appl. Crystallogr. 1990, 23, 241-245.
314. J. S. Pedersen, D. Posselt, and K. Mortensen, Analytical treatment of the resolution function for small-angle scattering, J. Appl. Crystallogr. 1990, 23, 321-333.
315. A. R. Faruqi, R. A. Cross, and J. Kendrick-Jones, Solution small-angle X-ray scattering studies on myosin with a multiwire area detector, J. Appl. Crystallogr. 1991, 24, 852-856.
316. F. Né, et al., Characterization of an image-plate detector used for quantitative smallangle-scattering studies, J. Appl. Crystallogr. 1993, 26, 763-773.
317. P. Fratzl and A. Daxer, Structural transformation of collagen fibrils in corneal stoma during drying: an X-ray scattering study, Biophys. J. 1993, 64, 1210-1214.
318. A. Gupta, I. R. Harrison, and J. Lahijani, Small-angle X-ray scattering in carbon fibers, J. Appl. Crystallogr. 1994, 27, 627-636.
319. M. W. Tate, et al., A large-format high-resolution area X-ray detector based on a fiberoptically bonded charge-coupled device (CCD), J. Appl. Crystallogr. 28, 1995, 196-205.
320. D. J. Hughes, et al., Time-resolved simultaneous SAXS/WAXS of the drawing of polyethylene at the Daresbury SRS, J. Synchrotron Radiat. 1996, 3, 84-90.
321. V. Le Flanchec, et al., Two-dimensional desmearing of centrosymmetric small-angle X-ray scattering diffraction patterns, J. Appl. Crystallogr. 1996, 29, 110-117.
322. S. Pollzzi, et al., Two-dimensional small-angle X-ray scattering investigation of stretched borosilicate glasses, J. Appl. Crystallogr. 1997, 30, 487-494.
323. J. A. Pople, P. A. Keates, and G. R. Mitchell, ATwo-dimensional X-ray scattering system for in-situ time-resolving studies of polymer structures subjected to controlled deformations, J. Synchrotron Radiat. 1997, 4, 267-278.
324. Z. Bu, et al., A small-angle X-ray scattering apparatus for studying biological macromolecules in solution, J. Appl. Crystallogr. 1998, 31, 533-543.
325. B. B. He, K. Smith, U. Preckwinkel, and H. F. Jakob, Small angle X-ray scattering systems with point focus and area detector, American Crystallography Association Annual Meeting, Washington, DC, 1998.
326. S. Ran, et al. Novel image analysis of two-dimensional X-ray fiber diffraction patterns: example of a polypropylene fiber drawing study, J. Appl. Crystallogr. 2000, 33, 1031-1036.
327. T. Fujisawa, Y. Inoko, and N. Yagi, The use of a Hamamatsu X-ray image intensifier with a cooled CCD as a solution X-ray scattering detector, J. Synchrotron Radiat. 1999, 6, 1106-1114.
328. S. Seifert, et al., Design and performance of a ASAXS instrument at the advanced photon source, J. Appl. Crystallogr. 2000, 33, 782-784.
329. I. Zizak, et al., Investigation of bone and cartilage by synchrotron scanning-SAXS and -WAXD with micrometer spatial resolution, J. Appl. Crystallogr. 2000, 33, 820-823.
330. D. Pontoni, T. Narayanana, and A. R. Rennieb, High-dynamic range SAXS data acquisition with an X-ray image intensifier, J. Appl. Crystallogr. 2002, 35, 207-211.
331. P. Fratzl, Small-angle scattering in materials science-a short review of applications in alloys, ceramics and composite materials, J. Appl. Crystallogr. 2003, 36, 397-404.
332. T. Kamiyama, et al. Change in the nano-structure of Al-base alloy ribbons in response to tensile stress-a small angle X-ray scattering study, J. Appl. Crystallogr. 2003, 36, 464-468.
333. V. Urban, et al. Two-dimensional camera for millisecond range time-resolved small-and wide-angle X-ray scattering, J. Appl. Crystallogr. 2003, 36, 809-811.
334. A. Orthen, et al., Development of a two-dimensional virtual-pixel X-ray imaging detector for time-resolved structure research, J. Synchrotron Radiat. 2004, 11, 177-186.
335. E. Mathew, A. Mirza, and N. Menhart, Liquid-chromatography-coupled SAXS for accurate sizing of aggregating proteins, J. Synchrotron Radiat. 2004, 11, 314-318.
336. J. S. Pedersen, A flux- and background-optimized version of the NanoSTAR smallangle X-ray scattering camera for solution scattering, J. Appl. Crystallogr. 2004, 37, 369-380.
337. C. A. Dreiss, K. S. Jack, and A. P. Parker, On the absolute calibration of bench-top small-angle X-ray scattering instruments: a comparison of different standard methods, J. Appl. Crystallogr. 2006, 39, 32-38.
338. P. L. Guzzo, et al., Two-dimensional small-angle X-ray scattering from as-grown and heat-treated synthetic quartz, J. Appl. Crystallogr. 2007, 40(Suppl.), s132-s137.
339. P. Boesecke, Reduction of two-dimensional small- and wide-angle X-ray scattering data, J. Appl. Crystallogr. 2007, 40(Suppl.), s423-s427.
340. W. Ruland and B. M. Smarsly, Two-dimensional small-angle X-ray scattering of self-assembled nanocomposite films with oriented arrays of spheres: determination of lattice type, preferred orientation, deformation and imperfection, J. Appl. Crystallogr. 2007, 40, 409-417.
341. N. Yagi and K. Inoue, CMOS flatpanel detectors for SAXS/WAXS experiments, J. Appl. Crystallogr. 2007, 40(Suppl.), s439-s441.
342. K. Erlacher, SAXS experiments using the D8 Discover with GADDS, Bruker Lab Report, May 2005.
343. S. J. Henderson, Comparison of parasitic scattering from window materials used for small-angle X-ray scattering: a better beryllium window, J Appl. Crystallogr. 1995, 28, 820-826.
344. L. Lurio, et al., Windows for small-angle X-ray scattering cryostats, J. Synchrotron Radiat. 2007, 14, 527-531.
345. T. C. Huang, H. Toraya, T. N. Blanton, and Y. Wu, X-ray powder diffraction analysis of silver bahenate, a possible low-angle diffraction standard, J Appl. Crystallogr. 1993, 26, 180-184.
346. P. Fratzl, F. Langmayr, and O. Paris, Evaluation of 3D small-angle scattering from non-spherical particles in single crystals, J. Appl. Crystallogr. 1993, 26, 820-826.
347. O. Paris, P. Fratzl, F. Langmayr, G. Vogl, and H. G. Haubold, Internal oxidation of Cu-Fe. I. Small-angle X-ray scattering study of oxide precipitation, Acta Metall. Mater. 1994, 42, 2019-2026.
348. P. Fratzl and H. F. Jakob, NanoStar: small-angle X-ray scattering on alloys, Bruker AXS Lab Report XRD 37, L86-E00037, 2002.
349. P. Fratzl and H. F. Jakob, NanoStar: small-angle X-ray scattering with area detector, Bruker AXS Application Note No. 359, A89-E00001, 2000.
350. J. S. Pedersen and K. Erlacher, NanoStar: small-angle X-ray scattering from solutions, Bruker AXS Application Note No. 369, A88-E00009, 2004.
351. A. Stradner and P. Schurtenberger, NanoStar: small-angle X-ray scattering (SAXS) on proteins, Bruker AXS Application Note No. 367, A88-E00008, 2004.
352. K. Erlacher and P. Doppler, NanoStar: SAXS studies on drug components embedded in a polymer matrix, Bruker AXS Lab Report XRD 50, L88-E00050, 2004.
353. P. Fratzl, et al., Position-resolved small-angle X-ray scattering of complex biological materials, J. Appl. Crystallogr. 1997, 30, 765-769.
354. H. F. Jakob, Nanostructure of natural cellulose and cellulose composites, Ph.D. thesis, Universit€at Wien, Austria, April 1996.
355. B. B. He, H. F. Jakob, K. Smith, and U. Preckwinkel, SAXS with area detector and scanning-SAXS, Proceedings SAXS99, Brookhaven, NY, USA, 1999.
356. A. Gourrier, Scanning X-ray imaging with small-angle scattering contrast, J. Appl. Crystallogr. 2007, 40(Suppl.), s78-s82.
357. Y. Kajiura, et al., Structural analysis of single wool fibre by scanning microbeam SAXS, J. Appl. Crystallogr. 2005, 38, 420-425.
358. O. Paris, et al., Scanning-SAXS: a tool for structural characterization of complex materials at the micrometer and the nanometer scale, Acta Crystallogr. 2002, A58(Suppl.), c25.
359. G. A. Maier, G. Wallner, R. W. Lang, and P. Fratzl, Scanning X-ray scattering study on structural changes at crack tips in PVDF, Acta Crystallogr. 2005, A61, c391.
360. T. Morita, et al., Apparatus for the simultaneous measurement of the X-ray absorption factor developed for a small-angle X-ray scattering beamline, J. Appl. Crystallogr. 2007, 40, 791-795.
361. B. B. He and K. L. Smith, An innovation in transmission coefficient measurement, Adv. X-Ray Anal. 1999, 43, 281-286.
362. B. B. He and K. L. Smith, Beam scattering measurement system with transmitted beam energy detection, US Patent 6,136,592, December 19, 2000.
363. B. B. He and R. D. Schipper, Vertical small angle X-ray scattering system, US Patent 6,956,928, October 18, 2005.
364. J. J. Hanak, The "multiple sample concept" in materials research: synthesis, compositional analysis and testing of entire multicomponent systems, J. Mater. Sci. 1970, 5, 964-971.
365. N. K. Terrett, Combinatory Chemistry, Oxford University Press, New York, 1998.
366. M. S. Lesney, The red queen's race: combinatorial chemistry feeds the need for speed, Today's Chemist at Work, January 1999, 8(1), 36-43.
367. R. Brown, Worldwide alliance pursues discovery tools, Today's Chemist at Work, January 1999, 8(1), 48-50.
368. J. S. MacNeil, Innovating in the material world, Today's Chemist at Work, December 1999, 8(12), 22-28.
369. R. Dagani, Afaster route to new materials, Chemical&Engineering News, March 8, 1999, 51-60.
370. S. Borman, Reducing time to drug discovery, Chemical & Engineering News, March 8, 1999, 33-48.
371. X. D. Xiang, et al., A combinatorial approach to materials discovery, Science 1995, 268(5218), 1738-1740.
372. B. Jandeleit, et al., Combinatorial materials science and catalysis, Angew. Chem. Int. Ed. Engl. 1999, 38, 2494-2535.
373. J. Bernstein, Pharmaceuticals: development and formulation, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 527-538.
374. J. Anwar, Pharmaceuticals: design and development of drug delivery systems, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 539-553.
375. B. Litteer and D. Beckers, Increasing application of X-ray powder diffraction in the pharmaceutical industry, American Laboratory, June 2005, 22-24.
376. S. Yin, et al., Simulated PXRD patterns in studies of the phase composition and thermal behavior of bulk crystalline solids, Am. Pharm. Rev. 2003, 6(2), 80-85.
377. M. Davidovch, et al., Detection of polymorphism by powder X-ray diffraction: interference by preferred orientation, Am. Pharm. Rev. 2004, 7(1), 10-16.
378. P. J. Desrosiers, The potential of perform: an integrated approach to preformulation allows researchers to complete this crucial step earlier in the drug development process, Mod. Drug Discov. 2004.
379. S. Yin, et al., Bioavailability enhancement of a COX-2 inhibitor, BMS-347070, from a nanocrystalline dispersion prepared by spray-drying, J. Pharm. Sci. 2005, 94(2), 1598-1607.
380. S. Yin, et al., In-situ variable temperature powder X-ray diffraction and thermal analysis, Am. Pharm. Rev. 2005, 8(2), 56-62.
381. S. Yin, C. J. Pommier, and R. P. Scaringe, The role of PXRD in QbD and PAT, PPXRD-6 organized by ICDD, Barcelona, Spain, February 19-22, 2007.
382. J. Lein, et al., Combinatorial material libraries on the microgram scale with an example of hydrothermal synthesis, Angew. Chem. Int. Ed. Engl. 1998, 37(24), 3369-3372.
383. B. B. He, et al., XRDrapid screening system for combinatorial chemistry, Adv. X-Ray Anal. 2001, 44, 1-5.
384. B. B. He, L. Bruegemann, and U. Preckwinkel, Rapid combinatorial screening by means of X-ray diffraction, Bus. Brief. Pharmatech, 2003.
385. R. D. Durst and B. B. He, Diffraction system for biological crystal screening, US Patent 6,836,532, December 28, 2004.
386. J. Fink, et al., X-ray micro diffractometer sample positioner,US Patent 5,359,640, October 25, 1994.
387. C. J. Gilmore, G. Barr, and J. Paisley, High-throughput powder diffraction. I. A new approach to qualitative and quantitative powder diffraction pattern analysis using full pattern profiles, J. Appl. Crystallogr. 2004, 37, 231-242.
388. G. Barr,W. Dong, and C. J. Gilmore, High-throughput powder diffraction. II. Applications of clustering methods and multivariate data analysis, J. Appl. Crystallogr. 2004, 37, 243-252.
389. G. Barr, W. Dong, C. Gilmore, and J. Faber, High-throughput powder diffraction. III. The application of full-profile pattern matching and multivariate statistical analysis to round-robin-type data sets, J. Appl. Crystallogr. 2004, 37, 635-642.
390. G. Barr, W. Dong, and C. J. Gilmore, High-throughput powder diffraction. IV. Cluster validation using silhouettes and fuzzy clustering, J. Appl. Crystallogr. 2004, 37, 874-882.
391. T. G. Fawcett, et al., Using PDF-4{thorn}/Organics to discover and analyze polymorphs, PPXRD-7 organized by ICDD, Orlando, FL, February 26, 2008.
392. G. Barr, W. Dong, and C. J. Gilmore, PolySNAP: a computer program for analyzing high-throughput powder diffraction data, J. Appl. Crystallogr. 2004, 37, 658-664.
393. G. Barr, C. J. Gilmore, and J. Paisley, SNAP-1D: a computer program for qualitative and quantitative powder diffraction pattern analysis using the full pattern profile, J. Appl. Crystallogr. 2004, 37, 665-668.
394. G. Barr,W. Dong, C. J. Gilmore, A. Parkin, and C. C.Wilson, dSNAP: a computer program to cluster and classify Cambridge structural database searches, J. Appl. Crystallogr. 2005, 38, 833-841.
395. PolySNAP: high-throughput XRDdata analysis for research, development and production control, Bruker AXS Handout, Order No. DOC-H88-EXS010, 2007.
396. M. Norrman, et al., Characterization of insulin microcrystals using powder diffraction and multivariate data analysis, J. Appl. Crystallogr. 2006, 39, 391-400.
397. B. B. He and F. F. Jin, X-ray diffraction screening system with retractable X-ray shield, US Patent 6,718,008, April 6, 2004.
398. B. B. He, et al., Retractable knife-edge forXRDcombinatorial screening, Adv. X-Ray Anal. 2004, 47, 194-199.
399. B. B. He, R. C. Bollig, and H. M. L. Br€ugemann, Transmission mode X-ray diffraction screening system, US Patent 6,859,520, February 22, 2005.
400. B. B. He and R. C. Bollig, X-ray diffraction screening system convertible between reflection and transmission modes, US Patent 7,242,745, July 10, 2007.
401. D. A. Long, Raman Spectroscopy, McGraw-Hill, New York, 1977.
402. D. J. Gardiner and P. R. Graves, Practical Raman Spectroscopy, Springer-Verlag, Berlin, 1989.
403. B. Sarsfield, et al., When spectroscopy is better than powder X-ray diffraction for crystal form analysis of active pharmaceutical ingredients, Am. Pharm. Rev. 2007, 10(1), 16-23.
404. L. D. Peter, et al., Quantitative PXRD and complementary techniques: improving resolution for multi-component compact systems using contemporary chemometric methods, PPXRD-7 organized by ICDD, Orlando, FL, February 25-28, 2008.
405. E. H. Barash, Trends in solid form patents: cocrystal IP opportunities and challenges, PPXRD-6 organized by ICDD, Barcelona, Spain, February 19-22, 2007.
406. B. B. He, C. S. Frampton, and F.W. Burg€azy, Combinatorial screening system with X-ray diffraction and Raman spectroscopy, US Patent 7,269,245, September 11, 2007.
407. B. He, C. Frampton, J. Sawatzki, A. Kern, C. Gilmore, and G. Barr, Combined XRD and Raman combinatorial screening system, PPXRD-6 organized by ICDD, Barcelona, Spain, February 19-22, 2007.
408. G. Barr and C. Gilmore, How to combine PXRD, Raman and other 1-D data in high throughput studies, PPXRD-6 organized by ICDD, Barcelona, Spain, February 19-22, 2007.
409. L. E. Alexander, X-Ray Diffraction Methods in Polymer Science, Krieger Publishing Company, Malabar, FL, 1985.
410. N. Kasai and M. Kakudo, X-Ray Diffraction by Macromolecules, Kodansha and Springer, Tokyo, 2005, 393-417.
411. N. S. Murthy and H. Minor, General procedure for evaluating amorphous scattering and crystallinity from X-ray diffraction scans of semicrystalline polymers, Polymer 1990, 31, 996-1002.
412. N. S. Murthy, H. Minor,M. K. Akkapeddi, and B. V. Buskirk, Characterization of polymer blends and alloys by constrained profile-analysis of X-ray diffraction scans, J. Appl. Polym. Sci. 1990, 41, 2265-2272.
413. K. B. Schwartz, et al., Crystallinity and unit cell variations in linear high-density polyethylene, Adv. X-Ray Anal. 1995, 38, 495-502.
414. N. S. Murthy and R. Barton Jr., Polymer industry, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 495-509.
415. S. Krimm and A. V. Tobolsky, Quantitative X-ray studies of order in amorphous and crystalline polymers. Quantitative X-ray determination of crystallinity in polyethylene, J. Polym. Sci. 1951, 7, 57-76.
416. C. G. Vonk, Computerization of Ruland's X-ray method for determination of the crystallinity in polymers, J. Appl. Crystallogr. 1973, 6, 148-152.
417. S. Polizzi, et al., A fitting method for the determination of crystallinity by means of X-ray diffraction, J. Appl. Crystallogr. 1990, 23, 359-365.
418. C. G. Vonk and G. Fagherazzi, The determination of the crystallinity in glass-ceramic materials by the method of Ruland, J. Appl. Crystallogr. 1983, 16, 274-276.
419. F. H. Chung and R. W. Scott, A new approach to the determination of crystallinity of polymers by X-ray diffraction, J. Appl. Crystallogr. 1973, 6, 225-230.
420. J. A. Pople, P. A. Keates and G. R. Mitchell, A two-dimensional X-ray scattering system for in-situ time-resolving studies of polymer structures subjected to controlled deformations, J. Synchrotron Radiat. 1997, 4, 267-278.
421. Percent crystallinity in polymer, Bruker AXS Lab Report No. L86-E00005, 2000.
422. S. Ran, et al., Novel image analysis of two-dimensional X-ray fiber diffraction patterns: example of a polypropylene fiber drawing study, J. Appl. Crystallogr. 2000, 33, 1031-1036.
423. M. Shimazu and A. Watanabe, Effective elimination of the Compton component in amorphous scattering by experimental means, J. Appl. Crystallogr. 1974, 7, 531-535.
424. W. Ruland, X-ray determination of crystallinity and diffuse disorder scattering, Acta Crystallogr. 1961, 14, 1180-1185.
425. P. Pattison, P. Suortti, and W. Weyrich, An X-ray spectrometer for inelastic scattering experiments. III. Design and performance, J. Appl. Crystallogr. 1986, 19, 353-363.
426. S. R. Sternberg, Biomedical image processing computer, IEEE Comput. Soc. 1983, 6, 22-34.
427. S. R. Sternberg, Greyscale morphology, Comput. Vis. Graph. Image Process. 1986, 35, 333-355.
428. D. R. Askeland and P. P. Phule, The Science and Engineering of Materials, Thomson-Brooks/Cole, Pacific Grove, CA, 2003.
429. S. Rao and C. R. Houska, X-ray particle-size broadening, Acta Crystallogr. 1986, A42, 6-13.
430. A. J. C. Wilson, Some further considerations in particle-size broadening, J. Appl. Crystallogr. 1971, 4, 440-443.
431. T. Ungár, Warren-Averbach applications, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 847-867.
432. H. P. Klug and L. E. Alexander, X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials, John Wiley & Sons, Inc., New York, 1974, 618-708.
433. B. D. Cullity, Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley, Reading, MA, 1978.
434. R. P. Goehner, et al., Microbeam crystallographic and element analysis, Industrial Applications of X-Ray Diffraction, edited by F. H. Chung and D. K. Smith, Marcel Dekker, New York, 2000, 869-890.
435. G. Allegra and S. Br€uckner, Crystallite-size distributions and diffraction line profiles near the peak maximum, Powder Diffr. 1993, 8(2), 102-106.
436. H. Ebel, Crystallite size distributions from intensities of diffraction spots, Powder Diffr. 1988, 3(3), 168-171.
437. J. I. Langford, The variance and other measures of line broadening in powder diffractometry. I. Practical considerations, J. Appl. Crystallogr. 1968, 1, 48-59.
438. J. I. Langford, The variance and other measures of line broadening in powder diffractometry. II. Determination of particle size, J. Appl. Crystallogr. 1968, 1, 131-138.
439. J. P. Urban, X-ray measurements of strain and mosaic particle size in annealed tungsten powder, J. Appl. Crystallogr. 1975, 8, 459-464.
440. J. I. Langford and A. J. C.Wilson, Scherrer after sixty years: a survey and some newresults in the determination of crystallite size, J. Appl. Crystallogr. 1978, 11, 102-113.
441. T. Adler and C. R. Houska, Simplifications in X-ray line-shape analysis, J. Appl. Phys. 1979, 50(5), 3282-3287.
442. C. R. Houska, Least-square analysis of X-ray diffraction line shapes with analytic functions, J. Appl. Phys. 1981, 52(2), 748-754.
443. R. Delhez, et al., Determination of crystallite size and lattice distortions through X-ray diffraction line profile analysis: recipes, methods and comments, Fresenius J. Anal. Chem. 1982, 312, 1-16.
444. S. Rao and C. R. Houska, X-ray diffraction profiles described by refined analytical functions, Acta Crystallogr. 1986, A42, 14-19.
445. D. Balzar, Profile fitting of X-ray diffraction lines and Fourier analysis of broadening, J. Appl. Crystallogr. 1992, 25, 559-570.
446. R. W. Cheary and A. Coelho, A fundamental parameters approach to X-ray line-profile fitting, J. Appl. Crystallogr. 1992, 25, 109-121.
447. T. Ungár, J. Gubicza, G. Ribárik, and A. Borbély, Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals, J. Appl. Crystallogr. 2001, 34, 298-310.
448. D. Balzar, et al., Size-strain line-broadening analysis of the ceria round-robin sample, J. Appl. Crystallogr. 2004, 37, 911-924.
449. Z.W.Wilchinsky, Effect of crystal, grain, and particle size on X-ray power diffracted from powders, Acta Crystallogr. 1951, 4, 1-9.
450. S. W. Freiman and N. M. Trahey, NIST Certificate of standard reference material 660a, lanthanum hexaboride powder for line position and line shape standard for powder diffraction, September 13, 2000.
451. T. Ida and K. Kimura, Effect of sample transparency in powder diffractometry with Bragg-Brentano geometry as a convolution, J. Appl. Crystallogr. 1999, 32, 982-991.
452. C. F. Jatczak, Retained Austenite and Its Measurement by X-Ray Diffraction,SAE800426, Society of Automotive Engineering, Warrendale, PA, 1980.
453. Standard practice for X-ray determination of retained austenite in steel with near random crystallographic orientation, designation: E 975-03, ASTM International, 2003.
454. D. Stephan, G. Grosse, and K. Wetzig, Simultaneous position-resolved determination of phase and stress distributions by means of an X-ray diffractometer with a two-dimensional position-sensitive detector, J Appl. Crystallogr. 1995, 28, 561-567.
455. J. D. Makinson, et al., Diffracting particle size analysis of martensite-retained austenite microstructure, Adv. X-Ray Anal. 2000, 43, 326-331.
456. P. R. Rudolf and B. G. Landes, Two-dimensional X-ray diffraction and scattering of microcrystalline and polymeric materials, Spectroscopy 1994, 9(6), 22-33.
457. S. N. Sulyanov, A. N. Popov, and D. M. Kheiker, Using a two-dimensional detector for Xray powder diffractometry, J. Appl. Crystallogr. 1994, 27, 934-942.
458. B. B. He, Introduction to two-dimensional X-ray diffraction, Powder Diffr. 2003, 18(2), 71-85.
459. B. B. He, Scanning line detector for two-dimensional X-ray diffractometer, US Patent 7,190,762, March 13, 2007.
460. U. L. Olsen, S. Schmidt, and H. F. Poulsen, A high-spatial-resolution three-dimensional detector array for 30-200 keV X-rays based on structured scintillators, J. Synchrotron Radiat. 2008, 15, 363-370.
461. W. Leitenberger, et al., Application of a pnCCD in X-ray diffraction: a three-dimensional X-ray detector, J. Synchrotron Radiat. 2008, 15, 449-457.
462. D. E. McRee, Practical Protein Crystallography, Academic Press, San Diego, CA, 1993, pp. 84-86.
463. R. Jenkins and R. L. Snyder, Introduction to X-Ray Powder Diffractometry, JohnWiley & Sons, Inc., New York, 1996.
464. E. Prince and P. T. Boggs, Least squares, International Table for X-Ray Crystallography, Vol. C, edited by A. J. C. Wilson, Kluwer Academic Publishers, 1992, pp. 594-604.