-
4
-
-
38649102798
-
Enhanced dissolution of silymarin/polyvinylpyrrolidone solid dispersion pellets prepared by a one-step fluid-bed coating technique
-
DOI 10.1016/j.powtec.2007.05.029, PII S0032591007002884
-
Sun N, Wei X, Wu B, Chen J, Lu Y, Wu W. 2008. Enhanced dissolution of silymarin/polyvinylpyrrolidone solid dispersion pellets prepared by a onestep fluid-bed coating technique. Powder Technol 182: 72-80. (Pubitemid 351173199)
-
(2008)
Powder Technology
, vol.182
, Issue.1
, pp. 72-80
-
-
Sun, N.1
Wei, X.2
Wu, B.3
Chen, J.4
Lu, Y.5
Wu, W.6
-
5
-
-
43449127183
-
New insight into modified release pellets-Internal structure and drug release mechanism
-
Ensslin S, Moll KP, Paulus K, Mäder K. 2008. New insight into modified release pellets-Internal structure and drug release mechanism. J Control Release 128:149-156.
-
(2008)
J Control Release
, vol.128
, pp. 149-156
-
-
Ensslin, S.1
Moll, K.P.2
Paulus, K.3
Mäder, K.4
-
6
-
-
39649099134
-
Physical characterization of lansoprazole/PVP solid dispersion prepared by fluid-bed coating technique
-
DOI 10.1016/j.powtec.2007.07.011, PII S0032591007003506
-
Zhang X, Sun N, Wu B, Lu Y, Guan T, Wu W. 2008. Physical characterization of lansoprazole/PVP solid dispersion prepared by fluid-bed coating technique. Powder Technol 182:480-485. (Pubitemid 351288390)
-
(2008)
Powder Technology
, vol.182
, Issue.3
, pp. 480-485
-
-
Zhang, X.1
Sun, N.2
Wu, B.3
Lu, Y.4
Guan, T.5
Wu, W.6
-
7
-
-
33745579609
-
Fluid bed drying of guarana (paullinia cupana hbk) extract: Effect of process factors on caffeine content
-
Article 54
-
Pagliarussi RS, Bastos JK, Freitas LAP. 2006. Fluid bed drying of guarana (paullinia cupana hbk) extract: Effect of process factors on caffeine content. AAPS PharmSciTech 7:Article 54.
-
(2006)
AAPS PharmSciTech
, vol.7
-
-
Pagliarussi, R.S.1
Bastos, J.K.2
Freitas, L.A.P.3
-
8
-
-
1342266617
-
Importance of inlet air velocity in fluid bed drying of a granulation prepared in a high shear granulator
-
Gao JZH, Gray DB, Motheram R, Hussain MA. 2000. Importance inlet air velocity in fluid bed drying of a granulation prepared in a high shear granulator. AAPS PharmSciTech 1:TechNote. (Pubitemid 41086044)
-
(2000)
AAPS PharmSciTech
, vol.1
, Issue.4
-
-
Gao, J.Z.H.1
Gray, D.B.2
Motheram, R.3
Hussain, M.A.4
-
9
-
-
50149115748
-
The consequences of granulate heterogeneity towards breakage and attrition upon fluid-bed drying
-
Nieuwmeyer F, Maarschalk KV, Vromans H. 2008. The consequences of granulate heterogeneity towards breakage and attrition upon fluid-bed drying. Eur J Pharm Biopharm 70:402-408.
-
(2008)
Eur J Pharm Biopharm
, vol.70
, pp. 402-408
-
-
Nieuwmeyer, F.1
Maarschalk, K.V.2
Vromans, H.3
-
10
-
-
33846272147
-
Comparison of the effects of different drying techniques on properties of granules and tablets made on a production scale
-
DOI 10.1016/j.ijpharm.2006.09.001, PII S0378517306007344
-
Hegedus A, Pintye-Hódi K. 2007. Comparison of the effects of different drying techniques on properties of granules and tablets made on a production scale. Int J Pharm 330:99-104. (Pubitemid 46110951)
-
(2007)
International Journal of Pharmaceutics
, vol.330
, Issue.1-2
, pp. 99-104
-
-
Hegedus, A.1
Pintye-Hodi, K.2
-
11
-
-
2442459914
-
Formulation study for lansoprazole fast-disintegrating tablet. III. Design of rapidly disintegrating tablets
-
Shimizu T, Sugaya M, Nakano Y, Izutsu D, Mizukami Y, Okochi K, Tabata T, Hamaguchi N, Igari Y. 2003. Formulation study for lansoprazole fast-disintegrating tablet. III. Design of rapidly disintegrating tablets. Chem Pharm Bull 51:1121-1127.
-
(2003)
Chem Pharm Bull
, vol.51
, pp. 1121-1127
-
-
Shimizu, T.1
Sugaya, M.2
Nakano, Y.3
Izutsu, D.4
Mizukami, Y.5
Okochi, K.6
Tabata, T.7
Hamaguchi, N.8
Igari, Y.9
-
12
-
-
34548316737
-
Granulation of core particles suitable for film coating by agitation fluidized bed I. Optimum formulation for core particles and Development of a novel friability test method
-
Hamashita T, Nakagawa Y, Aketo T, Watano S. 2007. Granulation of core particles suitable for film coating by agitation fluidized bed I. Optimum formulation for core particles and Development of a novel friability test method. Chem Pharm Bull 55:1169-1174.
-
(2007)
Chem Pharm Bull
, vol.55
, pp. 1169-1174
-
-
Hamashita, T.1
Nakagawa, Y.2
Aketo, T.3
Watano, S.4
-
13
-
-
46749128580
-
Granulation of core particles suitable for film coating by agitation fluidized bed II. A proposal of a rapid dissolution test for Evaluation of bitter taste of ibuprofen
-
Hamashita T, Matsuzaki M, Ono T, Ono M, Tsunenari Y, Aketo T, Watano S. 2008. Granulation of core particles suitable for film coating by agitation fluidized bed II. A proposal of a rapid dissolution test for Evaluation of bitter taste of ibuprofen. Chem Pharm Bull 56:883-887.
-
(2008)
Chem Pharm Bull
, vol.56
, pp. 883-887
-
-
Hamashita, T.1
Matsuzaki, M.2
Ono, T.3
Ono, M.4
Tsunenari, Y.5
Aketo, T.6
Watano, S.7
-
14
-
-
43249113881
-
Development of a novel osmotically driven drug delivery system for weakly basic drugs
-
Guthmann C, Lipp R, Wagner T, Kranz H. 2008. Development of a novel osmotically driven drug delivery system for weakly basic drugs. Eur J Pharm Biopharm 69:667-674.
-
(2008)
Eur J Pharm Biopharm
, vol.69
, pp. 667-674
-
-
Guthmann, C.1
Lipp, R.2
Wagner, T.3
Kranz, H.4
-
15
-
-
50149120096
-
In-vitro and in-vivo evaluation of enteric-coated starch-based pellets pre pared via extrusion/spheronisation
-
Dukić-Ott A, Beer T, Remon JP, Baeyens W, Foreman P, Vervaet C. 2008. In-vitro and in-vivo evaluation of enteric-coated starch-based pellets pre pared via extrusion/spheronisation. Eur J Pharm Biopharm 70:302-312.
-
(2008)
Eur J Pharm Biopharm
, vol.70
, pp. 302-312
-
-
Dukić-Ott, A.1
Beer, T.2
Remon, J.P.3
Baeyens, W.4
Foreman, P.5
Vervaet, C.6
-
16
-
-
47049128634
-
In vitro and in vivo evaluation of ofloxacin sustained release pellets
-
Cui Y, Zhang Y, Tang X. 2008. In vitro and in vivo evaluation of ofloxacin sustained release pellets. Int J Pharm 360:47-52.
-
(2008)
Int J Pharm
, vol.360
, pp. 47-52
-
-
Cui, Y.1
Zhang, Y.2
Tang, X.3
-
17
-
-
48149095501
-
Leaky enteric coating on ranitidine hydrochloride beads: Dissolution and prediction of plasma data
-
Bendas ER, Ayres JW. 2008. Leaky enteric coating on ranitidine hydrochloride beads: Dissolution and prediction of plasma data. Eur J Pharm Biopharm 69:977-985.
-
(2008)
Eur J Pharm Biopharm
, vol.69
, pp. 977-985
-
-
Bendas, E.R.1
Ayres, J.W.2
-
18
-
-
49649135524
-
The effect of particle size and size distribution on the behavior of gas fluidized beds
-
Geldart D. 1972. The effect of particle size and size distribution on the behavior of gas fluidized beds. Powder Technol 6:201-215.
-
(1972)
Powder Technol
, vol.6
, pp. 201-215
-
-
Geldart, D.1
-
19
-
-
0003280561
-
Single particles, fixed and quiescent beds
-
Geldart D, editor. Chichester UK: John Wiley and Sons
-
Geldart D. 1986. Single particles, fixed and quiescent beds. In: Geldart D, editor. Gas fluidization technology. Chichester UK: John Wiley and Sons.
-
(1986)
Gas Fluidization Technology
-
-
Geldart, D.1
-
20
-
-
0015626608
-
Types of gas fluidization
-
Geldart D. 1973. Types of gas fluidization. Powder Technol 7:285-292.
-
(1973)
Powder Technol
, vol.7
, pp. 285-292
-
-
Geldart, D.1
-
21
-
-
0020177919
-
INTERPRETATION of GELDART'S TYPE A, B, C and D POWDERS by TAKING into ACCOUNT INTERPARTICLE COHESION FORCES
-
DOI 10.1016/0032-5910(82)85041-9
-
Molerus O. 1982 Interpretation of Geldart's Type A, B, C, and D powders by taking into account interparticle cohesion forces. Powder Technol 33:81-87. (Pubitemid 13462995)
-
(1982)
Powder Technology
, vol.33
, Issue.1
, pp. 81-87
-
-
Molerus, O.1
-
22
-
-
0024106971
-
A numerical representation of Geldart's classification
-
Clark NN, Van Egmond JW, Turton R. 1968. A numerical representation of Geldart's classification. Powder Technol 56:225-226.
-
(1968)
Powder Technol
, vol.56
, pp. 225-226
-
-
Clark, N.N.1
Van Egmond, J.W.2
Turton, R.3
-
23
-
-
0021495133
-
HEAT TRANSFER to IMMERSED SURFACES in GAS-FLUIDIZED BEDS of LARGE PARTICLES and POWDER CHARACTERIZATION
-
DOI 10.1016/0032-5910(84)85037-8
-
Saxena SC, Ganzha VL. 1984. Heat transfer to immersed surfaces in gas fluidized beds of large particles and powder characterization. Powder Technol 39:199-208. (Pubitemid 14671865)
-
(1984)
Powder Technology
, vol.39
, Issue.2
, pp. 199-208
-
-
Saxena, S.C.1
Ganzha, V.L.2
-
24
-
-
0028138651
-
Air suspension coating for multi-particulates
-
Jones DM. 1994. Air suspension coating for multi-particulates. Drug Dev Ind Pharm 20:3175-3206.
-
(1994)
Drug Dev Ind Pharm
, vol.20
, pp. 3175-3206
-
-
Jones, D.M.1
-
25
-
-
41949130445
-
Fluidization of non-spherical particles: Sphericity, Zingg factor and other fluidization parameters
-
Baiqian L, Xiaohui Z, Ligang W, Hui H. 2005. Fluidization of non-spherical particles: Sphericity, Zingg factor and other fluidization parameters. Particuology 6:125-129.
-
(2005)
Particuology
, vol.6
, pp. 125-129
-
-
Baiqian, L.1
Xiaohui, Z.2
Ligang, W.3
Hui, H.4
-
26
-
-
84918266485
-
A generalized method for predicting the minimum fluidization velocity
-
Wen CY, Yu YH. 1966. A generalized method for predicting the minimum fluidization velocity. AIChE J 12:610-612.
-
(1966)
AIChE J
, vol.12
, pp. 610-612
-
-
Wen, C.Y.1
Yu, Y.H.2
-
27
-
-
0017512003
-
The measurement of incipient fluidization velocities in a bed of coarse dolomite at temperature and pressure
-
Saxena SC, Vogel GJ. 1977. The measurement of incipient fluidization velocities in a bed of coarse dolomite at temperature and pressure. Trans Inst Chem Eng 55:184-189.
-
(1977)
Trans Inst Chem Eng
, vol.55
, pp. 184-189
-
-
Saxena, S.C.1
Vogel, G.J.2
-
29
-
-
0022704301
-
MINIMUM FLUIDIZATION VELOCITY of BINARY MIXTURE of PARTICLES with LARGE SIZE RATIO
-
DOI 10.1016/0032-5910(86)80021-3
-
Noda K, Uchida T, Makino T, Kamo H. 1986. Minimum fluidization velocity of binary mixture of particles with large size ratio. Powder Technol 46:149-154. (Pubitemid 16594884)
-
(1986)
Powder Technology
, vol.46
, Issue.2-3
, pp. 149-154
-
-
Noda, K.1
Uchida, S.2
Makino, T.3
Kamo, H.4
-
30
-
-
0027579807
-
Prediction of the minimum fluidization velocity
-
Lippens BC, Mulder J. 1993. Prediction of the minimum fluidization velocity. Powder Technol 75:67-78.
-
(1993)
Powder Technol
, vol.75
, pp. 67-78
-
-
Lippens, B.C.1
Mulder, J.2
-
31
-
-
0035368265
-
Minimum fluidization velocities of mixtures of biomass and sands
-
Rao TR, Bheemarasetti JVR. 2001. Minimum fluidization velocities of mixtures of biomass and sands. Energy 26:633-644.
-
(2001)
Energy
, vol.26
, pp. 633-644
-
-
Rao, T.R.1
Bheemarasetti, J.V.R.2
-
32
-
-
1542410336
-
The Characterization of Fluidization Behavior Using a Novel Multichamber Microscale Fluid Bed
-
DOI 10.1002/jps.10540
-
Räsänen E, Rantanen J, Mannermaa JP, Yliruusi J. 2004. The characterization of fluidization behavior using a novel multichamber microscale fluid bed. J Pharm Sci 93:780-791. (Pubitemid 38332309)
-
(2004)
Journal of Pharmaceutical Sciences
, vol.93
, Issue.3
, pp. 780-791
-
-
Rasanen, E.1
Rantanen, J.2
Mannermaa, J.-P.3
Yliruusi, J.4
-
33
-
-
0030912831
-
Qualitative description of the Wurster based fluid-bed coating process
-
Christensen FN, Bertelson P. 1997. Qualitative description of the Wurster based fluid-bed coating process. Drug Dev Ind Pharm 23:451-463.
-
(1997)
Drug Dev Ind Pharm
, vol.23
, pp. 451-463
-
-
Christensen, F.N.1
Bertelson, P.2
-
34
-
-
0001789718
-
Coating of pharmaceutical solid-dosage forms
-
Lieberman HA, Lachman L, Schwartz JB, editors. New York: Marcel Dekker
-
Porter SC, Bruno CH. 1990. Coating of pharmaceutical solid-dosage forms. In: Lieberman HA, Lachman L, Schwartz JB, editors. Pharmaceutical dosage forms, tablets. New York: Marcel Dekker. pp. 77-159.
-
(1990)
Pharmaceutical Dosage Forms, Tablets
, pp. 77-159
-
-
Porter, S.C.1
Ch, B.2
-
35
-
-
17444374871
-
Introduction and overview of pharmaceutical coating
-
Cole GC, editor. London, UK: Taylor & Francis
-
Cole GC. 1995. Introduction and overview of pharmaceutical coating. In: Cole GC, editor. Pharmaceutical coating technology. London, UK: Taylor & Francis. pp. 1-5.
-
(1995)
Pharmaceutical Coating Technology
, pp. 1-5
-
-
Cole, G.C.1
-
36
-
-
0002100770
-
Film coating of dragee seeds by fluidized bed spraying methods
-
Horvath E, Ormos Z. 1989. Film coating of dragee seeds by fluidized bed spraying methods. Acta Pharm Tech 35:90-96.
-
(1989)
Acta Pharm Tech
, vol.35
, pp. 90-96
-
-
Horvath, E.1
Ormos, Z.2
-
37
-
-
84946487318
-
Encapsulated and powdered foods
-
Onwulata C, editor. USA: CRC Press
-
Teunou E, Poncelet D. 2005. Encapsulated and powdered foods. In: Onwulata C, editor. Fluid bed coating. USA: CRC Press. pp. 197-214.
-
(2005)
Fluid Bed Coating
, pp. 197-214
-
-
Teunou, E.1
Poncelet, D.2
-
38
-
-
0031382716
-
Fluidized bed spray granulation. Investigation of the coating process on a single sphere
-
Link KC, Schlunder EU. 1997. Fluidized bed spray granulation. Investigation of the coating process on a single sphere. Chem Eng Process 36:443-457.
-
(1997)
Chem Eng Process
, vol.36
, pp. 443-457
-
-
Link, K.C.1
Schlunder, E.U.2
-
40
-
-
0032693723
-
Fluidized bed coating in food technology
-
DOI 10.1016/S0924-2244(99)00041-2, PII S0924224499000412
-
Dewettinck K, Huyghebaert A. 1999. Fluidized bed coating in food technology. Trends Food Sci Technol 10:163-168. (Pubitemid 29524025)
-
(1999)
Trends in Food Science and Technology
, vol.10
, Issue.4-5
, pp. 163-168
-
-
Dewettinck, K.1
Huyghebaert, A.2
-
41
-
-
0001325871
-
Industrial spray drying systems
-
Munjundar AS, editor. New York: Marcel Dekker
-
Filkova I, Munjundar AS. 1995. Industrial spray drying systems. In: Munjundar AS, editor. Handbook of industrial drying. New York: Marcel Dekker. pp. 263-307.
-
(1995)
Handbook of Industrial Drying
, pp. 263-307
-
-
Filkova, I.1
Munjundar, A.S.2
-
42
-
-
0000601763
-
Means for applying Coatings to tablets or like
-
Wurster DE. 1950. Means for applying Coatings to tablets or like. J Am Pharm Assoc 48:451-460.
-
(1950)
J Am Pharm Assoc
, vol.48
, pp. 451-460
-
-
Wurster, D.E.1
-
43
-
-
33845704246
-
Air-suspension coating in the food industry. Part II. Micro-level process approach Pearce
-
Stephen RLW, Jones JR, Paterson AHJ, Archer RH, David LP. 2007. Air-suspension coating in the food industry. Part II. Micro-level process approach Pearce. Powder Technol 171:34-45.
-
(2007)
Powder Technol
, vol.171
, pp. 34-45
-
-
Stephen, R.L.W.1
Jones, J.R.2
Paterson, A.H.J.3
Archer, R.H.4
David, L.P.5
-
44
-
-
0035829170
-
Particle growth and droplet deposition in fluidised bed granulation
-
DOI 10.1016/S0032-5910(01)00350-3, PII S0032591001003503
-
Zank J, Kind M, Schlunder EU. 2001. Particle growth and droplet deposition in fluidized bed granulation. Powder Technol 120:76-81. (Pubitemid 32846670)
-
(2001)
Powder Technology
, vol.120
, Issue.1-2
, pp. 76-81
-
-
Zank, J.1
Kind, M.2
Schlunder, E.-U.3
-
45
-
-
33646169375
-
Air suspension coating
-
Deasy PB, editor. New York: Marcel Dekker
-
Deasy PB. 1984. Air suspension coating. In: Deasy PB, editor. Microencapsulation and related drug processes. New York: Marcel Dekker. pp. 161-180.
-
(1984)
Microencapsulation and Related Drug Processes
, pp. 161-180
-
-
Deasy, P.B.1
-
46
-
-
0001751640
-
Key factors in the development of modified-release pellets
-
Ghebre-Sellasie I, editor. New York: Marcel Dekker
-
Porter SC, Ghebre-Sellassie I. 1990. Key factors in the development of modified-release pellets. In: Ghebre-Sellasie I, editor. Multiparticulate oral drug delivery. New York: Marcel Dekker. pp. 217-284.
-
(1990)
Multiparticulate Oral Drug Delivery
, pp. 217-284
-
-
Porter, S.C.1
Ghebre-Sellassie, I.2
-
47
-
-
0032538654
-
Solid cross-flow into the spout and particle trajectories in conical spouted beds
-
DOI 10.1016/S0009-2509(98)00170-5, PII S0009250998001705
-
SanJose MJ, Olazar M, Alvarez S, Izquierdo MA, Bilbao J. 1998. Solid cross-flow into the spout and particle trajectories in conical spouted beds. Chem Eng Sci 53:3561-3570. (Pubitemid 29114786)
-
(1998)
Chemical Engineering Science
, vol.53
, Issue.20
, pp. 3561-3570
-
-
San Jose, M.J.1
Olazar, M.2
Alvarez, S.3
Izquierdo, M.A.4
Bilbao, J.5
-
48
-
-
0141703356
-
Positron emission particle tracking studies of a wurster process for coating applications
-
Fitzpatrick S, Ding Y, Seiler C. 2003. Positron emission particle tracking studies of a Wurster process for coating applications. Pharm Tech 27:70-78. (Pubitemid 37140064)
-
(2003)
Pharmaceutical Technology
, vol.27
, Issue.9
, pp. 70-78
-
-
Fitzpatrick, S.1
Ding, Y.2
Seiler, C.3
Lovegrove, C.4
Booth, S.5
Forster, R.6
Parker, D.7
Seville, J.8
-
49
-
-
0034193131
-
Nonuniformity of particle coating on a size distribution of particles in a fluidized bed coater
-
DOI 10.1016/S0032-5910(99)00266-1, PII S0032591099002661
-
Sudsakorn K, Turton R. 2000. Non-uniformity of particle coating on a size distribution of particles in a fluidized bed coater. Powder Technol 110:37-43. (Pubitemid 30133349)
-
(2000)
Powder Technology
, vol.110
, Issue.1-2
, pp. 37-43
-
-
Sudsakorn, K.1
Turton, R.2
-
50
-
-
0034194380
-
Identification and characterization of factors controlling tablet coating uniformity in a Wurster coating process
-
DOI 10.1016/S0032-5910(99)00265-X, PII S003259109900265X
-
Shelukar S, Ho J, Zega J, Roland E, Yeh N, Quiram D, Nole A, Katdare A, Reynolds S. 2000. Identification and characterization of factors controlling tablet coating uniformity in a Wurster coating process. Powder Technol 110:29-36. (Pubitemid 30133348)
-
(2000)
Powder Technology
, vol.110
, Issue.1-2
, pp. 29-36
-
-
Shelukar, S.1
Ho, J.2
Zega, J.3
Roland, E.4
Yeh, N.5
Quiram, D.6
Nole, A.7
Katdare, A.8
Reynolds, S.9
-
51
-
-
85031341725
-
-
Masters K, editor. London: Leonard Hill Books
-
Masters K. 1979. In: Masters K, editor. Spray drying. London: Leonard Hill Books. p. 702.
-
(1979)
Spray Drying
, pp. 702
-
-
Masters, K.1
-
52
-
-
0002864207
-
Drying of droplets/sprays
-
Masters K, editor. New York: Longman Wiley
-
Masters K. 1988. Drying of droplets/sprays. In: Masters K, editor. Spray drying handbook. New York: Longman Wiley. pp. 298-342.
-
(1988)
Spray Drying Handbook
, pp. 298-342
-
-
Masters, K.1
-
53
-
-
0029310981
-
Aerodynamics and heat transfer during coating of tablets in two-dimensional spouted bed
-
Rocha SCS, Taranto OP, Ayub GE. 1995. Aerodynamics and heat transfer during coating of tablets in two-dimensional spouted bed. Can J Chem Eng 73:308-312.
-
(1995)
Can J Chem Eng
, vol.73
, pp. 308-312
-
-
Rocha, S.C.S.1
Taranto, O.P.2
Ayub, G.E.3
-
54
-
-
31544461555
-
Fluidized bed microencapsulation: Thermodynamics of aqueous and ethanolic coating processes
-
DOI 10.1080/02652040500317527, PII V5634171606039
-
Gouin S. 2005. Fluidized bed microencapsulation: Thermodynamics of aqueous and ethanolic coating processes. J Microencap 22:829-839. (Pubitemid 43158185)
-
(2005)
Journal of Microencapsulation
, vol.22
, Issue.8
, pp. 829-839
-
-
Gouin, S.1
-
55
-
-
0029310980
-
Coating of solids
-
Kleinbach Th, Riede E. 1995. Coating of solids. Chem Eng Process 34:329-337.
-
(1995)
Chem Eng Process
, vol.34
, pp. 329-337
-
-
Th, K.1
Riede, E.2
-
57
-
-
70349643529
-
Apparatus for coating solid particles
-
US patent 5718764
-
Walter K. Apparatus for coating solid particles, US patent 5718764.
-
-
-
Walter, K.1
-
58
-
-
0002775613
-
Gas injection in shallow. beds of fluidized, coarse solids
-
Donadono S, Maresca A, Massimilla L. 1980. Gas injection in shallow. beds of fluidized, coarse solids. Ing Chim Ital 16:1-10.
-
(1980)
Ing Chim Ital
, vol.16
, pp. 1-10
-
-
Donadono, S.1
Maresca, A.2
Massimilla, L.3
-
59
-
-
0003771352
-
Hydrodynamics of a gas jet immersed in a particles bed under non isothermic conditions
-
Bentahar F, Kaci F, Mahi F, Daoud K, Benkahla YK. 1997. Hydrodynamics of a gas jet immersed in a particles bed under non isothermic conditions. Proc ECCE, Florence 1:1855.
-
(1997)
Proc ECCE, Florence
, vol.1
, pp. 1855
-
-
Bentahar, F.1
Kaci, F.2
Mahi, F.3
Daoud, K.4
Benkahla, Y.K.5
-
60
-
-
41949113453
-
Effect of injection-nozzle operating parameters on the interaction between a gas-liquid jet and a gas-solid fluidized bed
-
Portoghese F, Ferrante L, Berruti F, Briens C, Chan E. 2008. Effect of injection-nozzle operating parameters on the interaction between a gas-liquid jet and a gas-solid fluidized bed. Powder Technol 184:1-10.
-
(2008)
Powder Technol
, vol.184
, pp. 1-10
-
-
Portoghese, F.1
Ferrante, L.2
Berruti, F.3
Briens, C.4
Chan, E.5
-
61
-
-
41949137737
-
A new and rapid method for the evaluation of the liquid-solid contact resulting from liquid injection into a fluidized bed
-
Leach A, Portoghese F, Briens C, Berruti F. 2008. A new and rapid method for the evaluation of the liquid-solid contact resulting from liquid injection into a fluidized bed. Powder Technol 184:44-51.
-
(2008)
Powder Technol
, vol.184
, pp. 44-51
-
-
Leach, A.1
Portoghese, F.2
Briens, C.3
Berruti, F.4
-
62
-
-
41949128585
-
Solids entrainment into gas, liquid, and gas-liquid spray jets in fluidized beds
-
Briens C, Berruti F, Felli V, Chan E. 2008. Solids entrainment into gas, liquid, and gas-liquid spray jets in fluidized beds. Powder Technol 184:52-57.
-
(2008)
Powder Technol
, vol.184
, pp. 52-57
-
-
Briens, C.1
Berruti, F.2
Felli, V.3
Chan, E.4
-
63
-
-
34447291081
-
Effect of nozzle type, size and pressure on spray droplet characteristics
-
DOI 10.1016/j.biosystemseng.2007.03.001, PII S1537511007000712
-
Nuyttens D, Baetens K, Schampheleire MD, Sonck B. 2007. Effect of nozzle type, size and pressure on spray droplet characteristics. Biosys Eng 97:333-345. (Pubitemid 47048791)
-
(2007)
Biosystems Engineering
, vol.97
, Issue.3
, pp. 333-345
-
-
Nuyttens, D.1
Baetens, K.2
De Schampheleire, M.3
Sonck, B.4
-
64
-
-
33846847496
-
A comparison of collision kernels for sprays from one and two-nozzle atomisation systems
-
DOI 10.1016/j.cej.2006.07.015, PII S1385894706003433
-
Langrish TAG, Kota K. 2007. A comparison of collision kernels for sprays from one and two-nozzle atomisation systems. Chem Eng J 126:131-138. (Pubitemid 46205355)
-
(2007)
Chemical Engineering Journal
, vol.126
, Issue.2-3
, pp. 131-138
-
-
Langrish, T.A.G.1
Kota, K.2
-
66
-
-
0002439978
-
Scale-up considerations in the fluid-bed process for controlled release products
-
Mehta AM. 1988. Scale-up considerations in the fluid-bed process for controlled release products. Pharm Tech 12:46-52.
-
(1988)
Pharm Tech
, vol.12
, pp. 46-52
-
-
Mehta, A.M.1
-
68
-
-
1842559833
-
Comparison of low shear, high shear, and fluid bed granulation during low dose tablet process development
-
Hausman DS. 2004. Comparison of low shear, high shear, and fluid bed granulation during low dose tablet process development. Drug Dev Ind Pharm 30:259-266.
-
(2004)
Drug Dev Ind Pharm
, vol.30
, pp. 259-266
-
-
Hausman, D.S.1
-
69
-
-
0028246481
-
Characterization of wet granulation process parameters using response surface methodology. 1. Top-spray fluidized bed
-
Lipps DM, Sakr AM. 1994. Characterization of wet granulation process parameters using response surface methodology. 1. Top-spray fluidized bed. J Pharm Sci 83:937-947.
-
(1994)
J Pharm Sci
, vol.83
, pp. 937-947
-
-
Lipps, D.M.1
Sakr, A.M.2
-
70
-
-
27544497972
-
Influence of process variable and physicochemical properties on the granulation mechanism of mannitol in a fluid bed top spray granulator
-
DOI 10.1080/03639040500272124
-
Bouffard J, Kaster M, Dumont H. 2005. Influence of process variable and physicochemical properties on the granulation mechanism of mannitol in a fluid bed top spray granulator. Drug Dev Ind Pharm 31:923-933. (Pubitemid 41540945)
-
(2005)
Drug Development and Industrial Pharmacy
, vol.31
, Issue.9
, pp. 923-933
-
-
Bouffard, J.1
Kaster, M.2
Dumont, H.3
-
71
-
-
43049087751
-
Top-spray fluid bed coating: Scale-up in terms of relative droplet size and drying force
-
DOI 10.1016/j.powtec.2007.09.009, PII S0032591007004834
-
Hede PD, Bach P, Anker D. 2008. Jensen Top-spray fluid bed coating: Scale-up in terms of relative droplet size and drying force. Powder Technol 184:318-332. (Pubitemid 351626820)
-
(2008)
Powder Technology
, vol.184
, Issue.3
, pp. 318-332
-
-
Hede, P.D.1
Bach, P.2
Jensen, A.D.3
-
72
-
-
14644415919
-
The scale-up of spray coating processes for granular solids and tablets
-
DOI 10.1016/j.powtec.2004.11.021, PII S0032591004004875
-
Turton R, Cheng XX. 2005. The scale-up of spray coating processes for granular solids and tablets. Powder Technol 150:78-85. (Pubitemid 40312809)
-
(2005)
Powder Technology
, vol.150
, Issue.2 SPEC. ISS
, pp. 78-85
-
-
Turton, R.1
Cheng, X.X.2
-
73
-
-
0002127397
-
Fluid flow through packed columns
-
Ergun S. 1952. Fluid flow through packed columns. Chem Eng Progress 48:89-94.
-
(1952)
Chem Eng Progress
, vol.48
, pp. 89-94
-
-
Ergun, S.1
-
74
-
-
18644367203
-
Studies of fluid bed granulation in an industrial R&D context
-
DOI 10.1016/j.ces.2005.02.021, PII S0009250905001211
-
Boerefijn R, Hounslow MJ. 2005. Studies of fluid bed granulation in an industrial R&D context. Chem Eng Sci 60:3879-3890. (Pubitemid 40665417)
-
(2005)
Chemical Engineering Science
, vol.60
, Issue.14
, pp. 3879-3890
-
-
Boerefijn, R.1
Hounslow, M.J.2
-
75
-
-
0342378046
-
Critical parameters and limiting conditions in binder granulation of fine powders
-
Tardos GI, Khan IM, Mort PR. 1997. Critical parameters and limiting conditions in binder granulation of fine powders. Powder Technol 94:245-258.
-
(1997)
Powder Technol
, vol.94
, pp. 245-258
-
-
Tardos, G.I.1
Khan, I.M.2
Mort, P.R.3
-
76
-
-
0035806257
-
Nucleation, growth and breakage phenomena in agitated granulation processes: A review
-
Iveson SM, Litster JD, Hapgood KB, Ennis J. 2001. Nucleation, growth and breakage phenomena in agitated granulation processes: A review. Powder Technol 117:3-39.
-
(2001)
Powder Technol
, vol.117
, pp. 3-39
-
-
Iveson, S.M.1
Litster, J.D.2
Hapgood, K.B.3
Ennis, J.4
-
78
-
-
0000452874
-
Agglomeration of powders
-
Kristensen HG. 1988. Agglomeration of powders. Acta Pharm Suec 25:187-204.
-
(1988)
Acta Pharm Suec
, vol.25
, pp. 187-204
-
-
Kristensen, H.G.1
-
79
-
-
36048938114
-
Process control during fluid-bed granulation. The importance of humidity control
-
Westrup J. 1996. Process control during fluid-bed granulation. The importance of humidity control. Pharm Res 13:220.
-
(1996)
Pharm Res
, vol.13
, pp. 220
-
-
Westrup, J.1
-
80
-
-
0033039331
-
Effects and control of humidity and particle mixing in fluid-bed granulation
-
Schaafsma SH, Kossen NWF, Mos MT, Blauw L, Hoffmann AC. 1999. Effects and control of humidity and particle mixing in fluid-bed granulation. AIChE J 45:1202-1210. (Pubitemid 29290744)
-
(1999)
AIChE Journal
, vol.45
, Issue.6
, pp. 1202-1210
-
-
Schaafsma, S.H.1
Kossen, N.W.F.2
Mos, M.T.3
Blauw, L.4
Hoffmann, A.C.5
-
81
-
-
36048950677
-
Novel description of a design space for fluidised bed granulation
-
DOI 10.1016/j.ijpharm.2007.05.051, PII S0378517307004747
-
Lipsanen T, Antikainen O, Raikkonen H, Airaksinen S, Yliruusi J. 2007. Novel description of a design space for fluidized bed granulation. Int J Pharm 315:101-107. (Pubitemid 350087547)
-
(2007)
International Journal of Pharmaceutics
, vol.345
, Issue.1-2
, pp. 101-107
-
-
Lipsanen, T.1
Antikainen, O.2
Raikkonen, H.3
Airaksinen, S.4
Yliruusi, J.5
-
82
-
-
36549008702
-
Study growth kinetics in fluidized bed granulation with at-line FBRM
-
DOI 10.1016/j.ijpharm.2007.06.043, PII S0378517307005261
-
Hu X, Cunningham JC, Winstead D. 2008. Study growth kinetics in fluidized bed granulation with at-line FBRM. Int J Pharm 347:54-61. (Pubitemid 350180320)
-
(2008)
International Journal of Pharmaceutics
, vol.347
, Issue.1-2
, pp. 54-61
-
-
Hu, X.1
Cunningham, J.C.2
Winstead, D.3
-
83
-
-
84966735318
-
Fluid bed granulations in microscale fluid bed powder processor (MFP)
-
Kivikero N, Ingelbeen B, Murtomaa M, Antikainen O, Räsänen E, Mannermaa JP, Juppo A. 2007. Fluid bed granulations in microscale fluid bed powder processor (MFP). Eur J Pharm Sci 32:S49.
-
(2007)
Eur J Pharm Sci
, vol.32
-
-
Kivikero, N.1
Ingelbeen, B.2
Murtomaa, M.3
Antikainen, O.4
Räsänen, E.5
Mannermaa, J.P.6
Juppo, A.7
-
84
-
-
34447340233
-
Small-scale top-spray fluidised bed coating: Granule impact strength, agglomeration tendency and coating layer morphology
-
DOI 10.1016/j.powtec.2007.02.018, PII S0032591007000691
-
Hede PD, Bach P, Jensen AD. 2007. Small-scale top-spray fluidized bed coating: Granule impact strength, agglomeration tendency and coating layer morphology. Powder Technol 176:156-167. (Pubitemid 47058148)
-
(2007)
Powder Technology
, vol.176
, Issue.2-3
, pp. 156-167
-
-
Hede, P.D.1
Bach, P.2
Jensen, A.D.3
-
85
-
-
0344528556
-
Effects of process variables on the size, shape, and surface characteristics of microcrystalline cellulose beads prepared in a centrifugal granulator
-
DOI 10.1081/DDC-100102215
-
Rashid H, Heinmki J, Antikainen O, Yliruusi J. 1999. Effects of process variables on the size, shape, and surface characteristics of microcrystalline cellulose beads prepared in a centrifugal granulator. Drug Dev Ind Pharm 25:605-611. (Pubitemid 29186292)
-
(1999)
Drug Development and Industrial Pharmacy
, vol.25
, Issue.5
, pp. 605-611
-
-
Rashid, H.A.1
Heinamaki, J.2
Antikainen, O.3
Yliruusi, J.4
-
86
-
-
0034755748
-
The effect of powder type, free moisture and deformation behaviour of granules on the kinetics of fluid-bed granulation
-
DOI 10.1016/S0939-6411(01)00185-0, PII S0939641101001850
-
Abberger T. 2001. The effect of powder type, free moisture and deformation behavior of granules on the kinetics of fluid-bed granulation. Eur J Pharm Biopharm 52:327-336. (Pubitemid 33033186)
-
(2001)
European Journal of Pharmaceutics and Biopharmaceutics
, vol.52
, Issue.3
, pp. 327-336
-
-
Abberger, T.1
-
87
-
-
33947594314
-
Optimization and scale-up of a fluid bed tangential spray rotogranulation process
-
DOI 10.1016/j.ijpharm.2006.11.022, PII S0378517306009550
-
Bouffard J, Dumont H, Bertrand F, Legros R. 2007. Optimization and scale-up of a fluid bed tangential spray rotogranulation process. Int J Pharm 335:54-62. (Pubitemid 46482865)
-
(2007)
International Journal of Pharmaceutics
, vol.335
, Issue.1-2
, pp. 54-62
-
-
Bouffard, J.1
Dumont, H.2
Bertrand, F.3
Legros, R.4
-
89
-
-
0034767326
-
Process control and scale-up of pharmaceutical wet granulation processes: A review
-
DOI 10.1016/S0939-6411(01)00184-9, PII S0939641101001849
-
Faure A, York P, Rowe RC. 2001. Process control and scale-up of pharmaceutical wet granulation processes: A review. Eur J Pharm Biopharm 52:269-277. (Pubitemid 33033180)
-
(2001)
European Journal of Pharmaceutics and Biopharmaceutics
, vol.52
, Issue.3
, pp. 269-277
-
-
Faure, A.1
York, P.2
Rowe, R.C.3
-
90
-
-
0001870496
-
Pelletization by granulation in a roto-processor RP-2. Part 1. Effects of process and product variables on granule growth
-
Holm P, Bonde M, Wigmore T. 1996. Pelletization by granulation in a roto-processor RP-2. Part 1. Effects of process and product variables on granule growth. Pharm Tech Eur 8:22-36.
-
(1996)
Pharm Tech Eur
, vol.8
, pp. 22-36
-
-
Holm, P.1
Bonde, M.2
Wigmore, T.3
-
92
-
-
1842500846
-
Effects of material motion on agglomeration in the rotary fluidized bed granulator
-
Jäger KF, Bauer KH. 1982. Effects of material motion on agglomeration in the rotary fluidized bed granulator. Drugs Made Ger 25:61-65.
-
(1982)
Drugs Made Ger
, vol.25
, pp. 61-65
-
-
Jäger, K.F.1
Bauer, K.H.2
-
94
-
-
0031003259
-
Application of powder-layering technology and film coating for manufacture of sustained-release pellets using a rotary fluid bed processor
-
Vuppala MK, Parikh DM, Bhagat HR. 1997 Application of powder-layering technology and film coating for manufacture of sustained-release pellets using a rotary fluid bed processor. Drug Dev Ind Pharm 23:687-694.
-
(1997)
Drug Dev Ind Pharm
, vol.23
, pp. 687-694
-
-
Vuppala, M.K.1
Parikh, D.M.2
Bhagat, H.R.3
-
95
-
-
0030317742
-
Improvement of the material motion in a rotary processor
-
Vertommen J, Jaucot B, Rombaut P, Kinget R. 1996. Improvement of the material motion in a rotary processor. Pharm Dev Tech 1:365-371. (Pubitemid 28257339)
-
(1996)
Pharmaceutical Development and Technology
, vol.1
, Issue.4
, pp. 365-371
-
-
Vertommen, J.1
Jaucot, B.2
Rombaut, P.3
Kinget, R.4
-
96
-
-
0031033983
-
The influence of five selected processing and formulation variables on the particle size, particle size distribution, and friability of pellets produced in a rotary processor
-
Vertommen J, Kinget R. 1997. The influence of five selected processing and formulation variables on the particle size, particle size distribution, and friability of pellets produced in a rotary processor. Drug Dev Ind Pharm 23:39-46. (Pubitemid 27099478)
-
(1997)
Drug Development and Industrial Pharmacy
, vol.23
, Issue.1
, pp. 39-46
-
-
Vertommen, J.1
Kinget, R.2
-
97
-
-
0028244651
-
Preparation of Indobufen pellets by using centrifugal rotary fluidized bed equipment without starting seeds
-
Vecchio C, Bruni G, Gazzaniga A. 1994. Preparation of indobufen pellets by using centrifugal rotary fluidized bed equipment without starting seeds. Drug Dev Ind Pharm 209:1943-1956. (Pubitemid 24210238)
-
(1994)
Drug Development and Industrial Pharmacy
, vol.20
, Issue.12
, pp. 1943-1956
-
-
Vecchio, C.1
Bruni, G.2
Gazzanagi, A.3
-
98
-
-
0001903612
-
Pellets: A general overview
-
Ghebre-Sellassie I, editor. New York: Marcel Dekker Inc.
-
Ghebre-Sellassie I. 1989. Pellets: A general overview. In: Ghebre-Sellassie I, editor. Pharmaceutical pelletization technology. New York: Marcel Dekker Inc. pp. 1-13.
-
(1989)
Pharmaceutical Pelletization Technology
, pp. 1-13
-
-
Ghebre-Sellassie, I.1
-
99
-
-
33645024433
-
Wet granulation in rotary processor and fluid bed: Comparison of granule and tablet properties
-
Article 22
-
Kristensen J, Hansen VW. 2006. Wet granulation in rotary processor and fluid bed: Comparison of granule and tablet properties. AAPS PharmSciTech 7:Article 22.
-
(2006)
AAPS PharmSciTech
, vol.7
-
-
Kristensen, J.1
Hansen, V.W.2
-
100
-
-
0028830177
-
Extrusion spheronisation: A literature review
-
Vervaet C, Baert L, Remon JP. 1995. Extrusion spheronisation: A literature review. Int J Pharm 116:131-146.
-
(1995)
Int J Pharm
, vol.116
, pp. 131-146
-
-
Vervaet, C.1
Baert, L.2
Remon, J.P.3
-
101
-
-
0028924865
-
Factorial design in the feasibility of producing microcel MC 101 pellets by extrusion/spheronization
-
Sonaglio D, Bataille B, Ortigosa C, Jacob M. 1995. Factorial design in the feasibility of producing microcel MC 101 pellets by extrusion/ spheronization. Int J Pharm 115:53-60.
-
(1995)
Int J Pharm
, vol.115
, pp. 53-60
-
-
Sonaglio, D.1
Bataille, B.2
Ortigosa, C.3
Jacob, M.4
-
102
-
-
0003052145
-
Manufacture of spherical acetaminophen pellets: Comparison of rotary processing with multi-step extrusion and spheronization
-
Robinson RL, Hollenbeck RG. 1991. Manufacture of spherical acetaminophen pellets: Comparison of rotary processing with multi-step extrusion and spheronization. Pharm Tech 15:48-56.
-
(1991)
Pharm Tech
, vol.15
, pp. 48-56
-
-
Robinson, R.L.1
Hollenbeck, R.G.2
-
103
-
-
0033018787
-
Fluid-bed technology: Overview and criteria for process selection
-
Rubino DP. 1999. Fluid-bed technology: Overview and criteria for process selection. Pharm Tech 23:104-113. (Pubitemid 29282562)
-
(1999)
Pharmaceutical Technology
, vol.23
, Issue.6
, pp. 104-113
-
-
Rubino, O.P.1
-
104
-
-
33544469747
-
Development, production and in-vitro evaluation of enteric coated aspirin pellets
-
April 13-16, Utrecht, The Netherlands
-
Korakianiti E, Rekkas DM, Dallas PP, Choulis NH. Development, production and in-vitro evaluation of enteric coated aspirin pellets. The 18th Pharmaceutical Technology Conference and Exhibition, Proceedings, Vol.2, April 13-16, Utrecht, The Netherlands.
-
The 18th Pharmaceutical Technology Conference and Exhibition, Proceedings
, vol.2
-
-
Korakianiti, E.1
Rekkas, D.M.2
Dallas, P.P.3
Choulis, N.H.4
-
105
-
-
0027466515
-
Evaluation of drug layering and coating: Effect of process mode and binder level
-
Iyer RM, Augsburger LL, Parikh DM. 1993. Evaluation of drug layering and coating: Effect of process mode and binder level. Drug Dev Ind Pharm 19:981-998.
-
(1993)
Drug Dev Ind Pharm
, vol.19
, pp. 981-998
-
-
Iyer, R.M.1
Augsburger, L.L.2
Parikh, D.M.3
-
107
-
-
0023951956
-
Recent advances in microencapsulation technology and equipment
-
Li SP, Kowarski CR, Feld KM, Grim WM. 1988. Recent advances in microencapsulation technology and equipment. Drug Dev Ind Pharm 14:353-376. (Pubitemid 18099522)
-
(1988)
Drug Development and Industrial Pharmacy
, vol.14
, Issue.2-3
, pp. 353-376
-
-
Por Li, S.1
Kowarski, C.R.2
Feld, K.M.3
Grim, W.M.4
-
108
-
-
0005455049
-
Centrifugal equipment
-
Ghebre-Sellassie I, editor. New York: Marcel Dekker Inc.
-
Goodhart FW. 1989. Centrifugal equipment. In: Ghebre-Sellassie I, editor. Pharmaceutical pelletization technology. New York: Marcel Dekker Inc. pp. 101-122.
-
(1989)
Pharmaceutical Pelletization Technology
, pp. 101-122
-
-
Goodhart, F.W.1
-
109
-
-
0028125341
-
Effect of formulation components on drug release from multiparticulates
-
Nesbitt RU. 1994. Effect of formulation components on drug release from multiparticulates. Drug Dev Ind Pharm 20:3207-3236. (Pubitemid 24353486)
-
(1994)
Drug Development and Industrial Pharmacy
, vol.20
, Issue.20
, pp. 3207-3236
-
-
Nesbitt, R.U.1
-
110
-
-
0031775741
-
Influence of polytetrafluoroethylene on spheroid production by rotary processing
-
Liew CV, Wan LSC, Heng PWS. 1998. Influence of polytetrafluoroethylene on spheroid production by rotary processing. STP Pharma Sci 8:297-302.
-
(1998)
STP Pharma Sci
, vol.8
, pp. 297-302
-
-
Liew, C.V.1
Wan, L.S.C.2
Heng, P.W.S.3
-
112
-
-
0028102137
-
The role of moisture and gap air pressure in the formation of spherical granules by rotary processing
-
Wan LSC, Heng PWS, Liew CV. 1994. The role of moisture and gap air pressure in the formation of spherical granules by rotary processing. Drug Dev Ind Pharm 20:2551-2561.
-
(1994)
Drug Dev Ind Pharm
, vol.20
, pp. 2551-2561
-
-
Wan, L.S.C.1
Heng, P.W.S.2
Liew, C.V.3
-
113
-
-
0028956462
-
The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids
-
Wan LSC, Heng PWS, Liew CV. 1995. The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids. Int J Pharm 118:213-219.
-
(1995)
Int J Pharm
, vol.118
, pp. 213-219
-
-
Wan, L.S.C.1
Heng, P.W.S.2
Liew, C.V.3
-
114
-
-
85031331737
-
Granule producing and/or processing apparatus and method
-
U.S. Patent 4740390
-
Kulling W. Granule producing and/or processing apparatus and method, U.S. Patent 4740390.
-
-
-
Kulling, W.1
-
115
-
-
17644432997
-
Influence of rotational speed and surface of rotating disc on pellets produced by direct rotor pelletization
-
Pisek R, Planinsek O, Tus M, Srcic S. 2000. Influence of rotational speed and surface of rotating disk on pellets produced by direct rotor pelletization. Pharm Ind 62:312-319. (Pubitemid 30313123)
-
(2000)
Pharmazeutische Industrie
, vol.62
, Issue.4
, pp. 312-319
-
-
Pisek, R.1
Planinsek, O.2
Tus, M.3
Srcic, S.4
-
116
-
-
0000538441
-
Spheronization: A novel pill-making process?
-
Rowe RC. 1985. Spheronization: A novel pill-making process? Pharm Ind 6:119-123.
-
(1985)
Pharm Ind
, vol.6
, pp. 119-123
-
-
Rowe, R.C.1
-
117
-
-
0013587546
-
Extrusion and spheronization equipment
-
Ghebre-Sellassie I, editor. New York: Marcel Dekker Inc.
-
Hicks DC, Freese HL. 1989. Extrusion and spheronization equipment. In: Ghebre-Sellassie I, editor. Pharmaceutical pelletization technology. New York: Marcel Dekker Inc. pp. 71-100.
-
(1989)
Pharmaceutical Pelletization Technology
, pp. 71-100
-
-
Hicks, D.C.1
Freese, H.L.2
-
118
-
-
0031775741
-
Influence of polytetrafluoroethylene on spheroid production by rotary processing
-
Liew CV, Wan LSC, Heng PWS. 1998. Influence of polytetrafluoroethylene on spheroid production by rotary processing. STP Pharma Sci 8:297-302.
-
(1998)
STP Pharma Sci
, vol.8
, pp. 297-302
-
-
Liew, C.V.1
Wan, L.S.C.2
Heng, P.W.S.3
-
119
-
-
0028956462
-
The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids
-
Wan LSC, Heng PWS, Liew CV. 1995. The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids. Int J Pharm 118:213-219.
-
(1995)
Int J Pharm
, vol.118
, pp. 213-219
-
-
Wan, L.S.C.1
Heng, P.W.S.2
Liew, C.V.3
-
120
-
-
0033943234
-
Role of base plate rotational speed in controlling spheroid size and size distribution and minimizing oversize particle formation during spheroid production by rotary processing
-
Liew CV, Wan LSC, Heng PWS. 2000. Role of base plate rotational speed in controlling spheroid size and size distribution and minimizing oversize particle formation during spheroid production by rotary processing. Drug Dev Ind Pharm 26:953-963.
-
(2000)
Drug Dev Ind Pharm
, vol.26
, pp. 953-963
-
-
Liew, C.V.1
Wan, L.S.C.2
Heng, P.W.S.3
-
121
-
-
0001870497
-
Pelletization by granulation in a rotoprocessor RP-2. Part II. Effects of process and product variables on agglomerates' shape and porosity
-
Holm P. 1996. Pelletization by granulation in a rotoprocessor RP-2. Part II. Effects of process and product variables on agglomerates' shape and porosity. Pharm Tech Eur 8:38-45.
-
(1996)
Pharm Tech Eur
, vol.8
, pp. 38-45
-
-
Holm, P.1
-
122
-
-
0037043104
-
Influence of teardrop studs on rotating frictional base plate on spheroid quality in rotary spheronization
-
DOI 10.1016/S0378-5173(02)00236-3, PII S0378517302002363
-
Heng PWS, Liew CV, Gu L. 2002. Influence of teardrop studs on rotating frictional base plate on spheroid quality in rotary spheronization. Int J Pharm 241:173-184. (Pubitemid 34667077)
-
(2002)
International Journal of Pharmaceutics
, vol.241
, Issue.1
, pp. 173-184
-
-
Heng, P.W.S.1
Liew, C.V.2
Gu, L.3
-
123
-
-
0037151424
-
The influence of operational variables on mean size and size distribution of spheroids produced by rotary spheronization using teardrop studs
-
DOI 10.1016/S0378-5173(02)00213-2, PII S0378517302002132
-
Liew CV, Gu L, Heng PWS. 2002. The influence of operational variables on mean size and size distribution of spheroids produced by rotary spheronization using teardrop studs. Int J Pharm 242:345-348. (Pubitemid 34899485)
-
(2002)
International Journal of Pharmaceutics
, vol.242
, Issue.1-2
, pp. 345-348
-
-
Liew, C.V.1
Gu, L.2
Heng, P.W.S.3
-
124
-
-
1342336401
-
Feasibility studies in spheronization and scale-up of ibuprofen microparticulates using the rotor disk fluid-bed technology
-
Chukwumezie BN, Wojcik M, Malak P, Adeyeye MC. 2002. Feasibility studies in spheronization and scale-up of ibuprofen microparticulates using the rotor disk fluid-bed technology. AAPS PharmSciTech 3:Article 2. (Pubitemid 41086093)
-
(2002)
AAPS PharmSciTech
, vol.3
, Issue.1
, pp. 2
-
-
Chukwumezie, B.N.1
Wojcik, M.2
Malak, P.3
Adeyeye, M.C.4
-
125
-
-
0023951956
-
Recent advances in microencapsulation technology and equipment
-
Li SP, Kowarski CR, Feld KM, Grim WM. 1988. Recent advances in microencapsulation technology and equipment. Drug Dev Ind Pharm 14:353-376. (Pubitemid 18099522)
-
(1988)
Drug Development and Industrial Pharmacy
, vol.14
, Issue.2-3
, pp. 353-376
-
-
Por Li, S.1
Kowarski, C.R.2
Feld, K.M.3
Grim, W.M.4
-
127
-
-
0023909986
-
Influence of liquid bonding strength on power consumption during granulation in a high shear mixer
-
Ritala M, Holm P, Schaefer T, Kristensen HG. 1988. Influence of liquid bonding strength on power consumption during granulation in a high shear mixer. Drug Dev Ind Pharm 14:1041-1060. (Pubitemid 18154548)
-
(1988)
Drug Development and Industrial Pharmacy
, vol.14
, Issue.8
, pp. 1041-1060
-
-
Ritala, M.1
Holm, P.2
Schaefer, T.3
Kristensen, H.G.4
-
129
-
-
0026786172
-
Melt pelletization in a high shear mixer I. Effects of process variables and binder
-
Schæfer T, Holm P, Kristensen HG. 1992. Melt pelletization in a high shear mixer I. Effects of process variables and binder. Acta Pharm Nord 4:133-140.
-
(1992)
Acta Pharm Nord
, vol.4
, pp. 133-140
-
-
Schæfer, T.1
Holm, P.2
Kristensen, H.G.3
-
130
-
-
0026793133
-
Melt pelletization in a high shear mixer II. Power consumption and granule growth
-
Schæfer T, Holm P, Kristensen HG. 1992. Melt pelletization in a high shear mixer II. Power consumption and granule growth. Acta Pharm Nord 4:141-148.
-
(1992)
Acta Pharm Nord
, vol.4
, pp. 141-148
-
-
Schæfer, T.1
Holm, P.2
Kristensen, H.G.3
-
131
-
-
0027199565
-
Pelletization by controlled wet granulation in a high-shear mixer
-
Holm P, Schæfer T, Kristensen HG. 1993. Pelletization by controlled wet granulation in a high shear mixer. STP Pharma Sci 3:286-293. (Pubitemid 23255885)
-
(1993)
S.T.P. Pharma Sciences
, vol.3
, Issue.4
, pp. 286-293
-
-
Holm, P.1
Schaefer, T.2
Kristensen, H.G.3
-
132
-
-
0031775741
-
Influence of polytetrafluoroethylene on spheroid production by rotary processing
-
Liew CV, Wan LSC, Heng PWS. 1998. Influence of polytetrafluoroethylene on spheroid production by rotary processing. STP Pharma Sci 8:297-302.
-
(1998)
STP Pharma Sci
, vol.8
, pp. 297-302
-
-
Liew, C.V.1
Wan, L.S.C.2
Heng, P.W.S.3
-
133
-
-
0033943234
-
Role of base plate rotational speed in controlling spheroid size and size distribution and minimizing oversize particle formation during spheroid production by rotary processing
-
Liew CV, Wan LSC, Heng PWS. 2000. Role of base plate rotational speed in controlling spheroid size and size distribution and minimizing oversize particle formation during spheroid production by rotary processing. Drug Dev Ind Pharm 26:953-963.
-
(2000)
Drug Dev Ind Pharm
, vol.26
, pp. 953-963
-
-
Liew, C.V.1
Wan, L.S.C.2
Heng, P.W.S.3
-
134
-
-
0029790835
-
The influence of five selected processing and formulation variables on the release of riboflavin from pellets produced in a rotary processor
-
Vertommen J, Kinget R. 1996. The influence of five selected processing and formulation variables on the release of riboflavin from pellets produced in a rotary processor. STP Pharma Sci 6:335-340. (Pubitemid 126447329)
-
(1996)
S.T.P. Pharma Sciences
, vol.6
, Issue.5
, pp. 335-340
-
-
Vertommen, J.1
Kinget, R.2
-
135
-
-
0031040451
-
Shape and surface smoothness of pellets made in a rotary processor
-
DOI 10.1016/S0378-5173(96)04754-0, PII S0378517396047540
-
Vertommen J, Rombaut P, Kinget R. 1997. Shape and surface smoothness of pellets made in a rotary processor. Int J Pharm 146:21-29. (Pubitemid 27062961)
-
(1997)
International Journal of Pharmaceutics
, vol.146
, Issue.1
, pp. 21-29
-
-
Vertommen, J.1
Rombaut, P.2
Kinget, R.3
-
136
-
-
0032559614
-
Internal and external structure of pellets made in a rotary processor
-
DOI 10.1016/S0378-5173(97)00357-8, PII S0378517397003578
-
Vertommen J, Rombaut P, Kinget R. 1998. Internal and external structure of pellets made in a rotary processor. Int J Pharm 161:225-236. (Pubitemid 28095706)
-
(1998)
International Journal of Pharmaceutics
, vol.161
, Issue.2
, pp. 225-236
-
-
Vertommen, J.1
Rombaut, P.2
Kinget, R.3
-
137
-
-
0031745310
-
Estimation of the amount of water removed by gap and atomization air streams during pelletization in a rotary processor
-
Vertommen J, Rombaut P, Michoel A, Kinget R. 1998. Estimation of the amount of water removed by gap and atomization air streams during pelletization in a rotary processor. Pharm Dev Tech 3:63-72. (Pubitemid 28252506)
-
(1998)
Pharmaceutical Development and Technology
, vol.3
, Issue.1
, pp. 63-72
-
-
Vertommen, J.1
Rombaut, P.2
Michoel, A.3
Kinget, R.4
-
138
-
-
0000369067
-
Pelletization techniques
-
Swarbrick J, Boylan JC, editors. New York: Marcel Dekker, Inc.
-
Ghebre-Sellassie I, Knoch A. 1995. Pelletization techniques. In: Swarbrick J, Boylan JC, editors. Encyclopedia of pharmaceutical technology. New York: Marcel Dekker, Inc. pp. 369-394.
-
(1995)
Encyclopedia of Pharmaceutical Technology
, pp. 369-394
-
-
Ghebre-Sellassie, I.1
Knoch, A.2
-
139
-
-
0004970223
-
Rotary granulator - Evaluation of process technology for pellet production using a factorial experimental design
-
Gajdos B. 1984. Rotary granulator - Evaluation of process technology for pellet production using a factorial experimental design. Drugs Made Ger 27:30-36.
-
(1984)
Drugs Made Ger
, vol.27
, pp. 30-36
-
-
Gajdos, B.1
-
140
-
-
0003052145
-
Manufacture of spherical acetaminophen pellets: Comparison of rotary processing with multiple-step extrusion and spheronization
-
Robinson RL, Hollenbeck RG. 1991. Manufacture of spherical acetaminophen pellets: Comparison of rotary processing with multiple-step extrusion and spheronization. Pharm Tech 15:48-56.
-
(1991)
Pharm Tech
, vol.15
, pp. 48-56
-
-
Robinson, R.L.1
Hollenbeck, R.G.2
-
141
-
-
0031033983
-
The influence of five selected processing and formulation variables on the particle size, particle size distribution, and friability of pellets produced in a rotary processor
-
Vertommen J, Kinget R. 1997. The influence of five selected processing and formulation variables on the particle size, particle size distribution, and friability of pellets produced in a rotary processor. Drug Dev Ind Pharm 23:39-46. (Pubitemid 27099478)
-
(1997)
Drug Development and Industrial Pharmacy
, vol.23
, Issue.1
, pp. 39-46
-
-
Vertommen, J.1
Kinget, R.2
-
142
-
-
0028244651
-
Preparation of Indobufen pellets by using centrifugal rotary fluidized bed equipment without starting seeds
-
Vecchio C, Bruni G, Gazzaniga A. 1994. Preparation of indobufen pellets by using centrifugal rotary fluidized bed equipment without starting seeds. Drug Dev Ind Pharm 209:1943-1956. (Pubitemid 24210238)
-
(1994)
Drug Development and Industrial Pharmacy
, vol.20
, Issue.12
, pp. 1943-1956
-
-
Vecchio, C.1
Bruni, G.2
Gazzanagi, A.3
-
143
-
-
0031040451
-
Shape and surface smoothness of pellets made in a rotary processor
-
DOI 10.1016/S0378-5173(96)04754-0, PII S0378517396047540
-
Vertommen J, Rombaut P, Kinget R. 1997. Shape and surface smoothness of pellets made in a rotary processor. Int J Pharm 146:21-29. (Pubitemid 27062961)
-
(1997)
International Journal of Pharmaceutics
, vol.146
, Issue.1
, pp. 21-29
-
-
Vertommen, J.1
Rombaut, P.2
Kinget, R.3
-
144
-
-
0030601840
-
Optimization of spheroid production by centrifugal rotary processing
-
Heng PWS, Wan LSC, Tan YTF. 1996. Optimization of spheroid production by centrifugal rotary processing. Int J Pharm 143:107-112.
-
(1996)
Int J Pharm
, vol.143
, pp. 107-112
-
-
Heng, P.W.S.1
Wan, L.S.C.2
Tan, Y.T.F.3
-
145
-
-
0031886527
-
Rotary tangential spray technique for aqueous film coating of indobufen pellets
-
Vecchio C, Fabiani F, Sangalli ME, Zema L, Gazzaniga A. 1998. Rotary tangential spray technique for aqueous film coating of indobufen pellets. Drug Dev Ind Pharm 24:269-274. (Pubitemid 28119245)
-
(1998)
Drug Development and Industrial Pharmacy
, vol.24
, Issue.3
, pp. 269-274
-
-
Vecchio, C.1
Fabiani, F.2
Sangalli, M.E.3
Zema, L.4
Gazzaniga, A.5
-
146
-
-
0028244651
-
Preparation of Indobufen pellets by using centrifugal rotary fluidized bed equipment without starting seeds
-
Vecchio C, Bruni G, Gazzaniga A. 1994. Preparation of indobufen pellets by using centrifugal rotary fluidized bed equipment without starting seeds. Drug Dev Ind Pharm 209:1943-1956. (Pubitemid 24210238)
-
(1994)
Drug Development and Industrial Pharmacy
, vol.20
, Issue.12
, pp. 1943-1956
-
-
Vecchio, C.1
Bruni, G.2
Gazzanagi, A.3
-
147
-
-
18044399886
-
Direct pelletization in a rotary processor controlled by torque measurements. II: Effects of changes in the content of microcrystalline cellulose
-
Article 24
-
Kristensen J, Schæfer T. 2002. Direct pelletization in a rotary processor controlled by torque measurements. II: Effects of changes in the content of microcrystalline cellulose. AAPS PharmsciTech 2:Article 24.
-
(2002)
AAPS PharmsciTech
, vol.2
-
-
Kristensen, J.1
Schæfer, T.2
-
148
-
-
0034112023
-
Direct pelletization in a rotary processor controlled by torque measurements. I. Influence of process variables
-
Kristensen J, Schæfer T, Kleinebudde P. 2000. Direct pelletization in a rotary processor controlled by torque measurements. I. Influence of process variables. Pharm Dev Tech 5:247-256.
-
(2000)
Pharm Dev Tech
, vol.5
, pp. 247-256
-
-
Kristensen, J.1
Schæfer, T.2
Kleinebudde, P.3
-
149
-
-
0035213671
-
Comparison of rotor direct pelletization (fluid bed) and extrusion/spheronization method for pellet production
-
Pisek R, Sirca J, Svanjak G, Srcic S. 2001. Comparison of rotor direct pelletization (fluid bed) and extrusion/spheronization method for pellet production. Pharm Ind 63:1202-1209. (Pubitemid 33139971)
-
(2001)
Pharmazeutische Industrie
, vol.63
, Issue.11
, pp. 1202-1209
-
-
Pisek, R.1
Sirca, J.2
Svanjak, G.3
Srcic, S.4
-
150
-
-
0003052145
-
Manufacture of spherical acetaminophen pellets: Comparison of rotary processing with multiple-step extrusion and spheronization
-
Robinson RL, Hollenbeck RG. 1991. Manufacture of spherical acetaminophen pellets: Comparison of rotary processing with multiple-step extrusion and spheronization. Pharm Tech 15:48-56.
-
(1991)
Pharm Tech
, vol.15
, pp. 48-56
-
-
Robinson, R.L.1
Hollenbeck, R.G.2
-
151
-
-
23144447487
-
Optimization of the pelletization process in a fluid-bed rotor granulator using experimental design
-
Article 35
-
Korakianiti ES, Rekkas DM, Dallas PP, Choulis NH. 2000. Optimization of the pelletization process in a fluid-bed rotor granulator using experimental design. AAPS PharmSciTech 1: Article 35.
-
(2000)
AAPS PharmSciTech
, vol.1
-
-
Korakianiti, E.S.1
Rekkas, D.M.2
Dallas, P.P.3
Choulis, N.H.4
-
152
-
-
0033929364
-
Kornbildungsmechanismen bei der schmelzgranulierung in der wirbelschicht und ihre auswirkungen auf die tablettierung
-
Abberger T, Henck JO. 2000. Kornbildungsmechanismen bei der Schmelzgranulierung in der Wirbelschicht und ihre Auswirkungen auf die Tablettierung. Pharmazie 55:521-526. (Pubitemid 30471436)
-
(2000)
Pharmazie
, vol.55
, Issue.7
, pp. 521-526
-
-
Abberger, Th.1
Henck, J.-O.2
-
153
-
-
0033752690
-
A process to produce effervescent tablets: Fluidized bed dryer melt granulation
-
DOI 10.1081/DDC-100100988
-
Yanze FM, Duru C, Jacob M. 2000. A process to produce effervescent tablets: Fluidized bed dryer melt granulation. Drug Dev Ind Pharm 26:1167-1176. (Pubitemid 30807502)
-
(2000)
Drug Development and Industrial Pharmacy
, vol.26
, Issue.11
, pp. 1167-1176
-
-
Yanze, F.M.1
Duru, C.2
Jacob, M.3
-
154
-
-
0035666286
-
Influence of binder properties, method of addition, powder type and operating conditions on fluid-bed melt granulation and resulting tablet properties
-
Abberger T. 2001. Influence of binder properties, method of addition, powder type and operating conditions on fluid-bed melt granulation and resulting tablet properties. Pharmazie 56:949-952. (Pubitemid 34016825)
-
(2001)
Pharmazie
, vol.56
, Issue.12
, pp. 949-952
-
-
Abberger, Th.1
-
155
-
-
34547759359
-
Pharmaceutically engineering powders using FHMG: The effects of process parameters and formulation variables
-
DOI 10.1205/cherd06186
-
Walker G, Bell S, Vann M, Zhai H, Jones D, Andrews G. 2007. Pharmaceutically engineering powders using FHMG: The effects of process parameters and formulation variables. Chem Eng Res Design 85:981-986. (Pubitemid 47241492)
-
(2007)
Chemical Engineering Research and Design
, vol.85
, Issue.7 A
, pp. 981-986
-
-
Walker, G.1
Bell, S.2
Vann, M.3
Zhai, H.4
Jones, D.5
Andrews, G.6
-
156
-
-
18644370761
-
Influence of process parameters on fluidized hot-melt granulation and tablet pressing of pharmaceutical powders
-
Walker GM, Holland CR, Ahmad MMN, Craig DQM. 2005. Influence of process parameters on fluidized hot-melt granulation and tablet pressing of pharmaceutical powders. Chem Eng Sci 60:3867-3877.
-
(2005)
Chem Eng Sci
, vol.60
, pp. 3867-3877
-
-
Walker, G.M.1
Holland, C.R.2
Ahmad, M.M.N.3
Craig, D.Q.M.4
-
157
-
-
4143151696
-
Kinetics of fluidized bed melt granulation. IV. Selecting the breakage model
-
Tan HS, Salman AD, Hounslow MJ. 2004. Kinetics of fluidized bed melt granulation. IV. Selecting the breakage model. Powder Technol 143-144:65-83.
-
(2004)
Powder Technol
, vol.143-144
, pp. 65-83
-
-
Tan, H.S.1
Salman, A.D.2
Hounslow, M.J.3
-
158
-
-
0001844676
-
Control of fluidized bed granulation. V. Factors affecting granule growth
-
Schæfer T, Wørts O. 1978. Control of fluidized bed granulation. V. Factors affecting granule growth. Arch Pharm Chem Sci 6:69-82.
-
(1978)
Arch Pharm Chem Sci
, vol.6
, pp. 69-82
-
-
Schæfer, T.1
Wørts, O.2
-
159
-
-
0025736079
-
Determination of end-point with a complex granulation applying infrared moisture sensor
-
Watano S, Terashita K, Miyanami K. 1991. Determination of end-point with a complex granulation applying infrared moisture sensor. Chem Pharm Bull 39:1013-1017.
-
(1991)
Chem Pharm Bull
, vol.39
, pp. 1013-1017
-
-
Watano, S.1
Terashita, K.2
Miyanami, K.3
-
160
-
-
0028891755
-
Development of agglomerated talc. I. Evaluation of fluidized bed granulation parameters on the physical properties of agglomerated talc
-
Lin K, Peck GE. 1995. Development of agglomerated talc. I. Evaluation of fluidized bed granulation parameters on the physical properties of agglomerated talc. Drug Dev Ind Pharm 21:447-460.
-
(1995)
Drug Dev Ind Pharm
, vol.21
, pp. 447-460
-
-
Lin, K.1
Peck, G.E.2
-
161
-
-
0029790834
-
Granule growth kinetics and attrition of granules made of different materials in a fluidized bed granulator
-
Juslin L, Yliruusi J. 1996. Granule growth kinetics and attrition of granules made of different materials in a fluidized bed granulator. STP Pharma Sci 6:321-327. (Pubitemid 126447327)
-
(1996)
S.T.P. Pharma Sciences
, vol.6
, Issue.5
, pp. 321-327
-
-
Juslin, L.1
Yliruusi, J.2
-
162
-
-
0033988684
-
Fluid bed agglomeration with a narrow droplet size distribution
-
DOI 10.1016/S0378-5173(99)00329-4, PII S0378517399003294
-
Schaafsma SH, Vonk P, Kossen NWF. 2000. Fluid bed agglomeration with a narrow droplet size distribution. Int J Pharm 193:175-187. (Pubitemid 30001860)
-
(2000)
International Journal of Pharmaceutics
, vol.193
, Issue.2
, pp. 175-187
-
-
Schaafsma, S.H.1
Vonk, P.2
Kossen, N.W.F.3
-
163
-
-
0001844678
-
Control of fluidized bed granulation. IV. Effects of binder solution and atomization on granule size and size distribution
-
Schæfer T,Wørts O. 1978. Control of fluidized bed granulation. IV. Effects of binder solution and atomization on granule size and size distribution. Arch Pharm Chem Sci 6:14-25.
-
(1978)
Arch Pharm Chem Sci
, vol.6
, pp. 14-25
-
-
Schæfer, T.1
Wørts, O.2
-
164
-
-
0025864188
-
Action of binders in the fluidized bed granulation of lactose
-
Wan LSC, Lim KS. 1991. Action of binders in the fluidized bed granulation of lactose. STP Pharma Sci 1:248-255.
-
(1991)
STP Pharma Sci
, vol.1
, pp. 248-255
-
-
Wan, L.S.C.1
Lim, K.S.2
-
165
-
-
0029100587
-
Effect of several cellulosic binders on particle size distribution in fluidized bed granulation
-
Kokubo H, Nakamura S, Sunada H. 1995. Effect of several cellulosic binders on particle size distribution in fluidized bed granulation. Chem Pharm Bull 43:1402-1406.
-
(1995)
Chem Pharm Bull
, vol.43
, pp. 1402-1406
-
-
Kokubo, H.1
Nakamura, S.2
Sunada, H.3
-
166
-
-
0019157345
-
Granule growth of pharmaceutical powders in a fluidized bed
-
Andreev BV, Gorodnichev VI, Minina SA, El- Banna HM. 1980. Granule growth of pharmaceutical powders in a fluidized bed. Pharm Ind 42:1304-1306. (Pubitemid 11190597)
-
(1980)
Pharmazeutische Industrie
, vol.42
, Issue.12
, pp. 1304-1306
-
-
Andreev, B.V.1
Gorodnichev, V.I.2
Minina, S.A.3
El-Banna, H.M.4
-
167
-
-
0025864188
-
Action of binders in the fluidized bed granulation of lactose
-
Wan LSC, Lim KS. 1991. Action of binders in the fluidized bed granulation of lactose. STP Pharma Sci 1:248-255.
-
(1991)
STP Pharma Sci
, vol.1
, pp. 248-255
-
-
Wan, L.S.C.1
Lim, K.S.2
-
168
-
-
30344471093
-
Kinetics of fluidized bed melt granulation. I. Effect of process variables
-
Tan SH, Salman AD, Hounslow MJ. 2006. Kinetics of fluidized bed melt granulation. I. Effect of process variables. Chem Eng Sci 61:1585-1601.
-
(2006)
Chem Eng Sci
, vol.61
, pp. 1585-1601
-
-
Tan, S.H.1
Salman, A.D.2
Hounslow, M.J.3
-
169
-
-
33646141854
-
Kinetics of fluidized bed melt granulation. II. Modelling the net rate of growth
-
Tan SH, Salman AD, Hounslow MJ. 2006. Kinetics of fluidized bed melt granulation. II. Modelling the net rate of growth. Chem Eng Sci 61:3930-3941.
-
(2006)
Chem Eng Sci
, vol.61
, pp. 3930-3941
-
-
Tan, S.H.1
Salman, A.D.2
Hounslow, M.J.3
-
170
-
-
18644385287
-
Kinetics of fluidized bed melt granulation. III. Tracer studies
-
Tan SH, Salman AD, Hounslow MJ. 2005. Kinetics of fluidized bed melt granulation. III. Tracer studies. Chem Eng Sci 60:3835-3845.
-
(2005)
Chem Eng Sci
, vol.60
, pp. 3835-3845
-
-
Tan, S.H.1
Salman, A.D.2
Hounslow, M.J.3
-
171
-
-
4143151696
-
Kinetics of fluidized bed melt granulation IV. Selecting the breakage model
-
Tan SH, Salman AD, Hounslow MJ. 2004. Kinetics of fluidized bed melt granulation IV. Selecting the breakage model. Powder Technol 143-144:65-83.
-
(2004)
Powder Technol
, vol.143-144
, pp. 65-83
-
-
Tan, S.H.1
Salman, A.D.2
Hounslow, M.J.3
-
172
-
-
18644365012
-
Kinetics of fluidized bed melt granulationV: Simultaneous modelling of aggregation and breakage
-
Tan SH, Salman AD, Hounslow MJ. 2005. Kinetics of fluidized bed melt granulationV: Simultaneous modelling of aggregation and breakage. Chem Eng Sci 60:3847-3866.
-
(2005)
Chem Eng Sci
, vol.60
, pp. 3847-3866
-
-
Tan, S.H.1
Salman, A.D.2
Hounslow, M.J.3
-
173
-
-
33751006419
-
Co-melt fluidised bed granulation of pharmaceutical powders: Improvements in drug bioavailability
-
DOI 10.1016/j.ces.2006.08.074, PII S0009250906005550, Fluidized Bed Applications
-
Walker GM, Bell SEJ, Andrews G, Jones D. 2007. Co-melt fluidized bed granulation of pharmaceutical powders: Improvements in drug bioavailability. Chem Eng Sci 62:451-462. (Pubitemid 44750899)
-
(2007)
Chemical Engineering Science
, vol.62
, Issue.1-2
, pp. 451-462
-
-
Walker, G.M.1
Bell, S.E.J.2
Andrews, G.3
Jones, D.4
-
174
-
-
0036166898
-
Preparation and characterisation of ibuprofen-poloxamer 188 granules obtained by melt granulation
-
DOI 10.1016/S0928-0987(01)00210-X, PII S092809870100210X
-
Passerini N, Albertini B, Gonzalez-Rodriguez ML, Cavallari C, Rodriguez L. 2002. Preparation and characterisation of ibuprofen-poloxamer 188 granules obtained by melt granulation. Eur J Pharm Sci 15:71-78. (Pubitemid 34136970)
-
(2002)
European Journal of Pharmaceutical Sciences
, vol.15
, Issue.1
, pp. 71-78
-
-
Passerini, N.1
Albertini, B.2
Gonzalez-Rodriguez, M.L.3
Cavallari, C.4
Rodriguez, L.5
-
175
-
-
0642309884
-
Effect of crystallization behavior of polyethylene glycol 6000 on the properties of granules prepared by fluidized hot-melt granulation (FHMG)
-
Kidokoro M, Sasaki K, Haramiishi Y, Matahira N. 2003. Effect of crystalline behavior of PEG 6000 on the properties of granules prepared by fluidized hot melt granulation. Chem Pharm Bull 51:467-493. (Pubitemid 41656797)
-
(2003)
Chemical and Pharmaceutical Bulletin
, vol.51
, Issue.5
, pp. 487-493
-
-
Kidokoro, M.1
Sasaki, K.2
Haramiishi, Y.3
Matahira, N.4
-
176
-
-
33745273247
-
Effect of process parameters on the melt granulation of pharmaceutical powders
-
DOI 10.1016/j.powtec.2006.03.024, PII S003259100600129X
-
Walker GM, Andrews G, Jones D. 2006. Effect of granulation process parameters on melt granulation of pharmaceutical powders. Powder Technol 165:161-166. (Pubitemid 43928028)
-
(2006)
Powder Technology
, vol.165
, Issue.3
, pp. 161-166
-
-
Walker, G.M.1
Andrews, G.2
Jones, D.3
-
177
-
-
0017918304
-
Fluidized bed granulation of microdose pharmaceutical powder
-
Crooks MJ, Schade HW. 1978. Fluidized bed granulation of microdose pharmaceutical powder. Powder Technol 19:103-108.
-
(1978)
Powder Technol
, vol.19
, pp. 103-108
-
-
Crooks, M.J.1
Schade, H.W.2
-
178
-
-
18644370761
-
Influence of process parameters on fluidized hot-melt granulation and tablet pressing of pharmaceutical powders
-
Walker GM, Holland CR, Ahmad MMN, Craig DQM. 2005. Influence of process parameters on fluidized hot-melt granulation and tablet pressing of pharmaceutical powders. Chem Eng Sci 60:3867-3877.
-
(2005)
Chem Eng Sci
, vol.60
, pp. 3867-3877
-
-
Walker, G.M.1
Holland, C.R.2
Ahmad, M.M.N.3
Craig, D.Q.M.4
-
179
-
-
0037177510
-
Fluid bed granulation of a poorly water soluble, low density, micronized drug: Comparison with high shear granulation
-
DOI 10.1016/S0378-5173(01)00982-6, PII S0378517301009826
-
Gao JZH, Jain A, Motherham R, Gray DB, Hussain MA. 2002. Fluid bed granulation of poorly water soluble, low density, micronized drug: Comparison with high shear granulation. Int J Pharm 237:1-14. (Pubitemid 34310474)
-
(2002)
International Journal of Pharmaceutics
, vol.237
, Issue.1-2
, pp. 1-14
-
-
Gao, J.Z.H.1
Jain, A.2
Motheram, R.3
Gray, D.B.4
Hussain, M.A.5
-
180
-
-
0025241347
-
Characterization of a hot melt fluid bed coating process for fine granules
-
Jozwiaskowski MJ, Jones D, Franz RM. 1990. Characterization of a hot melt fluid bed coating process for fine granules. Pharm Res 7:3-10.
-
(1990)
Pharm Res
, vol.7
, pp. 3-10
-
-
Jozwiaskowski, M.J.1
Jones, D.2
Franz, R.M.3
-
181
-
-
0031382716
-
Fluidized bed spray granulation. Investigation of the coating process on a single sphere
-
Link KC, Schlunder EU. 1997. Fluidized bed spray granulation. Investigation of the coating process on a single sphere. Chem Eng Process 36:443-457.
-
(1997)
Chem Eng Process
, vol.36
, pp. 443-457
-
-
Link, K.C.1
Schlunder, E.U.2
-
182
-
-
33845704606
-
Air-suspension particle coating in the food industry. Part I. State of the art
-
Werner SRL, Jones JR, Paterson AHJ, Archer RH, Pearce DL. 2007. Air-suspension particle coating in the food industry. Part I. State of the art. Powder Technol 171:25-33.
-
(2007)
Powder Technol
, vol.171
, pp. 25-33
-
-
Werner, S.R.L.1
Jones, J.R.2
Paterson, A.H.J.3
Archer, R.H.4
Pearce, D.L.5
-
183
-
-
0035829170
-
Particle growth and droplet deposition in fluidised bed granulation
-
DOI 10.1016/S0032-5910(01)00350-3, PII S0032591001003503
-
Zank J, Kind M, Schlunder EU. 2001. Particle growth and droplet deposition in fluidized bed granulation. Powder Technol 120:76-81. (Pubitemid 32846670)
-
(2001)
Powder Technology
, vol.120
, Issue.1-2
, pp. 76-81
-
-
Zank, J.1
Kind, M.2
Schlunder, E.-U.3
-
184
-
-
0036467958
-
Numerical simulation of the electrostatic powder coating process with a corona spray gun
-
DOI 10.1016/S0304-3886(01)00181-4, PII S0304388601001814
-
Ye Q, Steigleder T, Scheibe A, Domnick J. 2002. Numerical simulation of
-
(2002)
Journal of Electrostatics
, vol.54
, Issue.2
, pp. 189-205
-
-
Ye, Q.1
Steigleder, T.2
Scheibe, A.3
Domnick, J.4
-
185
-
-
0242383535
-
On the simulation of space charge in electrostatic powder coating with a corona spray gun
-
DOI 10.1016/j.powtec.2003.08.019
-
Ye Q, Domnick J. 2003. On the simulation of space charge in electrostatic powder coating with a corona spray gun. Powder Technol 135-136:250-260. (Pubitemid 37346452)
-
(2003)
Powder Technology
, vol.135-136
, pp. 250-260
-
-
Ye, Q.1
Domnick, J.2
-
187
-
-
34447581128
-
Modeling nonelectrostatic and electrostatic powder coating
-
DOI 10.1016/j.jfoodeng.2007.04.005, PII S0260877407002348
-
Yousuf S, Barringer SA. 2007. Modeling non electrostatic and electrostatic powder coating. J Food Eng 83:550-561. (Pubitemid 47077820)
-
(2007)
Journal of Food Engineering
, vol.83
, Issue.4
, pp. 550-561
-
-
Yousuf, S.1
Barringer, S.A.2
-
188
-
-
34447518813
-
Particle size, cohesiveness and charging effects on electrostatic and nonelectrostatic powder coating
-
DOI 10.1016/j.elstat.2007.05.005, PII S0304388607000666
-
Ratanatriwong P, Barringer SA. 2007. Particle size, cohesiveness and charging effects on electrostatic and nonelectrostatic powder coating. J Electrostat 65:704-708. (Pubitemid 47074332)
-
(2007)
Journal of Electrostatics
, vol.65
, Issue.10-11
, pp. 704-708
-
-
Ratanatriwong, P.1
Barringer, S.2
-
189
-
-
34250787570
-
Modelling of electrostatic fluidized bed (EFB) coating process using artificial neural networks
-
DOI 10.1016/j.engappai.2006.06.013, PII S0952197606001242
-
Barletta M, Gisario A, Guarino S. 2007. Modelling of electrostatic fluidized bed (EFB) coating process using artificial neural networks. Eng App Artif Intel 20:721-733. (Pubitemid 46962282)
-
(2007)
Engineering Applications of Artificial Intelligence
, vol.20
, Issue.6
, pp. 721-733
-
-
Barletta, M.1
Gisario, A.2
Guarino, S.3
-
190
-
-
34247165754
-
Validation of a numerical model for the simulation of an electrostatic powder coating process
-
DOI 10.1016/j.ijmultiphaseflow.2006.12.001, PII S0301932206001844
-
Shah U, Zhang C, Zhu J, Wang F, Martinuzzi R. 2007. Validation of a numerical model for the simulation of an electrostatic powder coating process. Int J Multiphase Flow 33:557-573. (Pubitemid 46602665)
-
(2007)
International Journal of Multiphase Flow
, vol.33
, Issue.5
, pp. 557-573
-
-
Shah, U.1
Zhang, C.2
Zhu, J.3
Wang, F.4
Martinuzzi, R.5
-
191
-
-
34047190976
-
Development of matte finishes in electrostatic (EFB) and conventional hot dipping (CHDFB) fluidized bed coating process
-
DOI 10.1016/j.porgcoat.2007.01.012, PII S030094400700015X
-
Barletta M, Bolelli G, Guarino S, Lusvarghi L. 2007. Development of matte finishes in electrostatic (EFB) and conventional hot dipping (CHDFB) fluidized bed coating process. Prog Org Coat 59:53-67. (Pubitemid 46528633)
-
(2007)
Progress in Organic Coatings
, vol.59
, Issue.1
, pp. 53-67
-
-
Barletta, M.1
Bolelli, G.2
Guarino, S.3
Lusvarghi, L.4
-
192
-
-
33751241999
-
Development of smooth finishes in electrostatic fluidized bed (EFB) coating process of high-performance thermoplastic powders (PPA 571 H)
-
Barletta M, Gisario A, Guarino S, Rubino G. 2006. Development of smooth finishes in electrostatic fluidized bed (EFB) coating process of high-performance thermoplastic powders (PPA 571 H). Prog Org Coat 57:337-347.
-
(2006)
Prog Org Coat
, vol.57
, pp. 337-347
-
-
Barletta, M.1
Gisario, A.2
Guarino, S.3
Rubino, G.4
-
193
-
-
0026124125
-
Effect of particle size and porosity on particle film coating
-
Iley WJ. 1991. Effect of particle size and porosity on particle film coating. Powder Technol 65:441-445.
-
(1991)
Powder Technol
, vol.65
, pp. 441-445
-
-
Iley, W.J.1
-
195
-
-
70349638412
-
-
Wang TJ, Hasegawa H, Mineo T, Tsutsumi A, Yoshida K. 1997. Proc. of the 3rd SCEJ Sym. on Fluidization, Nagoya, Japan, December 4-5:136-143.
-
(1997)
Proc. of the 3rd SCEJ Sym. on Fluidization, Nagoya, Japan, December 4-5
, pp. 136-143
-
-
Wang, T.J.1
Hasegawa, H.2
Mineo, T.3
Tsutsumi, A.4
Yoshida, K.5
-
196
-
-
70349636477
-
Simulation of particle coating in the supercritical fluidized bed
-
Vogt C, Hartge E-U, Werther J, Brunner G. 2005. Simulation of particle coating in the supercritical fluidized bed. China Particuol 3:113-124.
-
(2005)
China Particuol
, vol.3
, pp. 113-124
-
-
Vogt, C.1
Hartge, E.-U.2
Werther, J.3
Brunner, G.4
-
197
-
-
5444267557
-
Microencapsulation of particles using supercritical carbon dioxide
-
Kröber H, Teipel U. 2005. Microencapsulation of particles using supercritical carbon dioxide. Chem Eng Process 44:215-219.
-
(2005)
Chem Eng Process
, vol.44
, pp. 215-219
-
-
Kröber, H.1
Teipel, U.2
-
199
-
-
0029142361
-
A novel fluidized-bed coating of fine particles by rapid expansion of supercritical fluid solutions
-
Tsutsumi A, Nakamoto S, Mineo T, Yoshida K. 1995. A novel fluidized-bed coating of fine particles by rapid expansion of supercritical fluid solutions. Powder Technol 85:275-278.
-
(1995)
Powder Technol
, vol.85
, pp. 275-278
-
-
Tsutsumi, A.1
Nakamoto, S.2
Mineo, T.3
Yoshida, K.4
-
200
-
-
0031948421
-
Fluidized bed granulation the - Importance of a drying zone for the particle growth mechanism
-
Becher RD, Schlü nder EU. 1997. Fluidized bed granulation the - Importance of a drying zone for the particle growth mechanism. Chem Eng Process 37:1-6.
-
(1997)
Chem Eng Process
, vol.37
, pp. 1-6
-
-
Becher, R.D.1
Schlü Nder, E.U.2
-
201
-
-
0032650830
-
Modelling the steady state thermodynamic operation point of topspray fluidized bed
-
Dewettinck K, Visscher A, Deroo L, Huyghebaert A. 1999. Modelling the steady state thermodynamic operation point of topspray fluidized bed. J Food Eng 39:131-143.
-
(1999)
J Food Eng
, vol.39
, pp. 131-143
-
-
Dewettinck, K.1
Visscher, A.2
Deroo, L.3
Huyghebaert, A.4
-
202
-
-
0006089491
-
Granulation of enzyme powders in a fluidised bed spray granulator
-
HärkÖ nen H, Koskinen M, Linko P, Siika-aho M, Poutanen K. 1993. Granulation of enzyme powders in a fluidised bed spray granulator. Lebensmittel Wissenchaft und Technologie 26:235-241.
-
(1993)
Lebensmittel Wissenchaft und Technologie
, vol.26
, pp. 235-241
-
-
Härkö Nen, H.1
Koskinen, M.2
Linko, P.3
Siika-aho, M.4
Poutanen, K.5
-
203
-
-
33746299776
-
Particles agglomeration in a conical fluidized bed in relation with air temperature profiles
-
DOI 10.1016/j.ces.2006.05.007, PII S0009250906003101
-
Jimenez T, Turchiuli C, Dumoulin E. 2006. Particles agglomeration in a conical fluidized bed in relation with air temperature profiles. Chem Eng Sci 61:5954-5961. (Pubitemid 44107881)
-
(2006)
Chemical Engineering Science
, vol.61
, Issue.18
, pp. 5954-5961
-
-
Jimenez, T.1
Turchiuli, C.2
Dumoulin, E.3
-
204
-
-
0031642529
-
The coating surface and agglomeration of seed particles in a fluidized bed coater
-
Kage H, Takahashi T, Yoshida T, Ogura H, Matsuno Y. 1998. The coating surface and agglomeration of seed particles in a fluidized bed coater. Adv Powder Tech 9:245-259. (Pubitemid 128551557)
-
(1998)
Advanced Powder Technology
, vol.9
, Issue.3
, pp. 245-259
-
-
Kage, H.1
Takahashi, T.2
Yoshida, T.3
Ogura, H.4
Matsuno, Y.5
-
205
-
-
0032689710
-
An experimental study of fluidized-bed coating: Influence of operating conditions on growth rate and mechanism
-
Saleh K, Cherif R, Hemati A. 1999. An experimental study of fluidized-bed coating: Influence of operating conditions on growth rate and mechanism. Adv Powder Tech 10:255-277.
-
(1999)
Adv Powder Tech
, vol.10
, pp. 255-277
-
-
Saleh, K.1
Cherif, R.2
Hemati, A.3
-
206
-
-
0021064671
-
Particle growth mechanisms in fluidized-bed granulation. I. The effects of process variables
-
Smith PG, Nienow AW. 1983. Particle growth mechanisms in fluidized-bed granulation. I. The effects of process variables. Chem Eng Sci 38:1223-1231.
-
(1983)
Chem Eng Sci
, vol.38
, pp. 1223-1231
-
-
Smith, P.G.1
Nienow, A.W.2
-
207
-
-
0002646090
-
Factors to consider in fluid-bed processing
-
Jones DM. 1985. Factors to consider in fluid-bed processing. Pharm Tech 9:50-62.
-
(1985)
Pharm Tech
, vol.9
, pp. 50-62
-
-
Jones, D.M.1
-
208
-
-
0040944178
-
Top-Spray Fluidized Bed Coating: Effect of Process Variables on Coating Efficiency
-
DOI 10.1006/fstl.1998.0417, PII S0023643898904170
-
Dewettinck K, Huyghebaert A. 1998. Top-spray fluidized bed coating: Effect of process variables on coating efficiency. Lebensmittel- Wissenschaft und Technologie 31:568-575. (Pubitemid 128370283)
-
(1998)
LWT - Food Science and Technology
, vol.31
, Issue.6
, pp. 568-575
-
-
Dewettinck, K.1
Huyghebaert, A.2
-
209
-
-
0344287152
-
Study of dynamic multi-dimensional temperature and concentration distributions in liquid-sprayed fluidized beds
-
DOI 10.1016/j.ces.2003.08.010
-
Heinrich S, Blumschein J, Henneberg M, Ihlow M, Peglow M, Morl L. 2003. Study of dynamic multi-dimensional temperature and concentration distributions in liquid-sprayed fluidized beds. Chem Eng Sci 58:5135-5160. (Pubitemid 37502843)
-
(2003)
Chemical Engineering Science
, vol.58
, Issue.23-24
, pp. 5135-5160
-
-
Heinrich, S.1
Blumschein, J.2
Henneberg, M.3
Ihlow, M.4
Peglow, M.5
Morl, L.6
-
211
-
-
0036476437
-
Fluid bed encapsulation of particles: Principles and practice
-
Guignon B, Duquenoy A, Dumoulin ED. 2002. Fluid bed encapsulation of particles: Principles and practice. Drying Tech 20:419-447.
-
(2002)
Drying Tech
, vol.20
, pp. 419-447
-
-
Guignon, B.1
Duquenoy, A.2
Dumoulin, E.D.3
-
212
-
-
0037453890
-
Helping to choose operating parameters for a coating fluid bed process
-
Guignon B, Regalado E, Duquenoy A, Dumoulin ED. 2003. Helping to choose operating parameters for a coating fluid bed process. Powder Technol 130:193-198.
-
(2003)
Powder Technol
, vol.130
, pp. 193-198
-
-
Guignon, B.1
Regalado, E.2
Duquenoy, A.3
Dumoulin, E.D.4
-
213
-
-
0027552449
-
Spouted bed seed coating: The effect of process variables on maximum coating rate and elutriation
-
Liu LX, Litster JD. 1993. Spouted bed seed coating: The effect of process variables on maximum coating rate and elutriation. Powder Technol 74:215-230.
-
(1993)
Powder Technol
, vol.74
, pp. 215-230
-
-
Liu, L.X.1
Litster, J.D.2
-
214
-
-
0023225538
-
Granulation. A review on pharmaceutical wet granulation
-
Kristensen HG, Schaefer T. 1987. Granulation. A review on pharmaceutical wet granulation. Drug Dev Ind Pharm 13:803-872.
-
(1987)
Drug Dev Ind Pharm
, vol.13
, pp. 803-872
-
-
Kristensen, H.G.1
Schaefer, T.2
-
215
-
-
0035806250
-
Using experimental design to optimize the process parameters in fluidized bed granulation on a semi-full scale
-
DOI 10.1016/S0378-5173(01)00658-5, PII S0378517301006585
-
Rambali B, Baert L, Massart DL. 2001. Using experimental design to optimize the process parameters in fluidized bed granulation on a semi-full scale. Int J Pharm 220:149-160. (Pubitemid 32476851)
-
(2001)
International Journal of Pharmaceutics
, vol.220
, Issue.1-2
, pp. 149-160
-
-
Rambali, B.1
Baert, L.2
Massart, D.L.3
-
216
-
-
84954777863
-
The theory of atmospheric evaporation with special reference to compartment dryers
-
Carrier WH. 1921. The theory of atmospheric evaporation with special reference to compartment dryers. J Ind Eng Chem 13:432-438.
-
(1921)
J Ind Eng Chem
, vol.13
, pp. 432-438
-
-
Carrier, W.H.1
|