Electrical and electrochemical processes

Intelligent Energy Field Manufacturing: Interdisciplinary Process Innovations

Volumn , Issue , 2010, Pages 173-212

  Sundaram, Murali Meenakshi ^a   Rajurkar, Kamlakar P ^b  

^a UNIVERSITY OF CINCINNATI   (United States)

^b UNIVERSITY OF NEBRASKA LINCOLN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85014882390     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/EBK1420071016     Document Type: Chapter

References (282)

1. Tsai, Y. Y., Su, J. S., and Su, C. Y., 2008, A novel method to produce carbon nanotubes using EDM process, International Journal of Machine Tools and Manufacture, 48, 1653-1657.
2. Jeong, Y. H., HanYoo, B., Lee, H. U., Min, B.-K., Cho, D.-W., and Lee, S. J., 2009, Deburring microfeatures using micro-EDM, Journal of Materials Processing Technology, 209, 5399-5406.
3. Kohkonen, K. E., 2001, Manufacturing precision and delicate parts, Proceedings of Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Conference, Cincinnati, OH. IEEE, Piscataway, NJ.
4. Puertas, I. and Luis, C. J., 2004, A study on the electrical discharge machining of conductive ceramics, Journal of Materials Processing Technology, 153-154, 1033-1038.
5. Priestley, J., 1778, Experiments and observations relating to the principle of acidity, the composition of water, and phlogiston, Philosophical Transactions of the Royal Society of London, 78, 147-157.
6. Lazarenko, B. R. and Lazarenko, N. I., 1948, Machining by erosion, American Machinist, 91, 120-121.
7. Jameson, E. C., 1983, Electrical Discharge Machining: Tooling, Methods, and Applications, Society of Manufacturing Engineers Marketing Services Division, Dearborn, MI.
8. Chapman, W. W., 2002, Modern Machine Shop’s Handbook for the Metalworking Industries, Hanser Gardner Publications, Cincinnati, OH.
9. Kher, S. and Dua, A., 1999, EDM pulse control: A design approach, Proceedings of the SICE 38th Annual Conference, Morioka, Japan. IEEE, Piscataway, NJ.
10. DiBitonto, D. D., Eubank, P. T., Patel, M. R., and Barrufet, M. A., 1989, Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model, Journal of Applied Physics, 66, 4095-4103.
11. Arunachalam, C., 1995, Modeling the electrical discharge machining process, PhD thesis, Texas A&M University, College Station, TX.
12. Albinski, K., Musiol, K., Miernikiewicz, A., Labuz, S., and Malota, M., 1995, Plasma temperature in electro-discharge machining, Proceedings of 11th International Symposium for Electromachining, Lausanne, Switzerland. Presses polytechniques et universitaires romandes, Lausanne, Switzerland, pp. 143-152.
13. Toren, M., Zvirin, Y., and Winograd, Y., 1975, Melting and evaporation phenomena during electrical erosion, Transactions of the ASME, Journal of Heat Transfer, 97 Series C, 576-581.
14. Koenig, W., Wertheim, R., Zvirin, Y., and Toren, M., 1975, Material removal and energy distribution in electrical discharge machining, Annals of the CIRP, 24, 95-100.
15. Erden, A., 1983, Effect of materials on the mechanism of electric discharge machining (EDM), Transactions of the ASME, Journal of Engineering Materials and Technology, 105, 132-138.
16. Gadalla, A. M. and Bozkurt, B., 1992, Expanding heat source model for thermal spalling of TiB2 in electrical discharge machining, Journal of Materials Research, 7, 2852-2858.
17. Trueman, C. S. and Huddleston, J., 2000, Material removal by spalling during EDM of ceramics, Journal of the European Ceramic Society, 20, 1629-1635.
18. Gadalla, A. M., Bozkurt, B., and Faulk, N. M., 1991, Modeling of thermal spalling during electrical discharge machining of titanium diboride, Journal of the American Ceramic Society, 74, 801-806.
19. Lauwers, B., Kruth, J. P., Liu, W., Eeraerts, W., Schacht, B., and Bleys, P., 2004, Investigation of material removal mechanisms in EDM of composite ceramic materials, Journal of Materials Processing Technology, 149, 347-352.
20. Tomura, S. and Kunieda, M., 2009, Analysis of electromagnetic force in wire-EDM, Precision Engineering, 33, 255-262.
21. Liu, Y. H., Ji, R. J., Li, X. P., Yu, L. L., and Zhang, H. F., 2008, Electric discharge milling of insulating ceramics, Proceedings of the Institution of Mechanical Engineers, Part B: Engineering Manufacture, 222, 361-366.
22. Rajurkar, K. P. and Yu, Z. Y., 2000, Micro EDM can produce micro parts, Manufacturing Engineering, 125, 68-70.
23. Yang, C. T., Ho, S. S., and Yan, B. H., 2001, Micro hole machining of borosilicate glass through electrochemical discharge machining (ECDM), Key Engineering Materials, 196, 149-166.
24. Li, H. and Masaki, T., 1991, Micro-EDM, SME Technical Paper, MS91-485, pp. 1-7.
25. Masuzawa, T. and Toenshoff, H. K., 1997, Three-dimensional micromachining by machine tools, Annals of the CIRP, 46, 621-628.
26. Rajurkar, K. P., Microelectrodischarge machining, Center for Nontraditional Manufacturing Research, University of Nebraska-Lincoln, http://www.unl.edu/nmrc/microEDM/medm3.htm
27. Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A., and Popov, K., 2004, Micro-EDM-Recent developments and research issues, Journal of Materials Processing Technology, 149, 50-57.
28. Masuzawa, T., 2001, Micro-EDM, Proceedings of the 13th International Symposium for Electromachining, Bilbao, Spain, pp. 1-19.
29. Rajurkar, K. P., Levy, G., Malshe, A., Sundaram, M. M., McGeough, J., Hu, X., Resnick, R., and DeSilva, A., 2006, Micro and nano machining by electro-physical and chemical processes, Annals of the CIRP, 55, 643-666.
30. Schumacher, B. M., 2004, After 60 years of EDM the discharge process remains still disputed, Journal of Materials Processing Technology, 149, 376-381.
31. Petrofes, N. F., 1989, Shaping advanced ceramics with electrical discharge machining, PhD thesis, Texas A&M University, College Station, TX.
32. Myers, G. E., 1987, Analytical Methods in Conduction Heat Transfer, Genium Publishing Corporation, Schenectady, NY.
33. Erden, A., Arinc, F., and Kogmen, M., 1995, Comparison of mathematical models for electric discharge machining, Journal of Materials Processing and Manufacturing Science, 4, 163-176.
34. Singh, A. and Ghosh, A., 1999, A thermo-electric model of material removal during electric discharge machining, International Journal of Machine Tools & Manufacture, 39, 669-682.
35. Ikai, T., Fujita, I., and Hashiguchi, K., 1992, Heat input radius for crater formation in the electric discharge machining, Transactions of the Institute of Electrical Engineers of Japan, Part D, 112-D, 943-949.
36. Ikai, T. and Hashiguchi, K., 1995, Heat input for crater formation in EDM. Proceedings of 11th International Symposium for Electromachining, Lausanne, Switzerland. Presses polytechniques et universitaires romandes, Lausanne, Switzerland.
37. Patel, M. R., Barrufet, M. A., Eubank, P. T., and DiBitonto, D. D., 1989, Theoretical models of the electrical discharge machining process. II. The anode erosion model, Journal of Applied Physics, 66, 4104-4111.
38. Erden, A. and Kaftanoglu, B., 1981, Heat transfer modeling of electrical discharge machining, Proceedings of the 21st International Machine Tool Design and Research Conference, Swansea, U.K. Macmillan Press, Ltd, London, U.K.
39. Marty, C. C., 1977, Investigation of surface temperature in electro-discharge machining, Transactions of the ASME, Journal of Engineering for Industry, 99, 682-684.
40. Van Dijck, F. S. and Dutre, W. L., 1974, Heat conduction model for the calculation of the volume of molten metal in electric discharges [discharge machining], Journal of Physics D (Applied Physics), 7, 899-910.
41. Heuvelman, C. J., 1969, Some aspects of the research on electro-erosion machining, Annals of the CIRP, 17, 195-199.
42. Spur, G. and Schoenbeck, J., 1993, Anode erosion in wire-EDM-A theoretical model, Annals of the CIRP, 42, 253-256.
43. Konig, W. and Wertheim, R., 1975, Material removal and energy distribution in EDM, Annals of the CIRP, 24, 95-100.
44. Jennes, M., Snoeys, R., and Dekeyser, W., 1984, Comparison of various approaches to model the thermal load on the EDM-wire electrode., Annals of the CIRP, 33, 93-98.
45. Roethel, F., Garbajs, V., and Kosec, L., 1975, Contribution to the micro-analysis of the spark eroded surfaces, Annals of the CIRP, 25, 135-140.
46. Rajurkar, K. P. and Pandit, S. M., 1984, Quantitative expressions for some aspects of surface integrity of electro-discharge machined components, Transactions of the ASME, Journal of Engineering for Industry, 106, 171-177.
47. Lee, L. C., Lim, L. C., Narayanan, V., and Venkatesh, V. C., 1988, Quantification of surface damage of tool steels after EDM, International Journal of Machine Tools and Manufacture, 28, 359-372.
48. Rebelo, J. C., Dias, A. M., Kremer, D., and Lebrun, J. L., 1998, Influence of EDM pulse energy on the surface integrity of martensitic steels, Journal of Materials Processing Technology, 84, 90-96.
49. Rebelo, J. C., Kornmeier, M., Batista, A. C., and Dias, A. M., 2002, Residual stress after EDM-FEM study and measurement results, Materials Science Forum, 404-407, 159-164.
50. Yadav, V., Jain, V. K., and Dixit, P. M., 2002, Thermal stresses due to electrical discharge machining, International Journal of Machine Tools and Manufacture, 42, 877-888.
51. Bhattacharya, R., Jain, V. K., and Ghoshdastidar, P. S., 1996, Numerical simulation of thermal erosion in EDM process, IE(I) Journal-PR, 77, 13-19.
52. Das, S., Klotz, M., and Klocke, F., 2003, EDM simulation: Finite element-based calculation of deformation, microstructure and residual stresses, Journal of Materials Processing Technology, 142, 434-451.
53. Rajurkar, K. P. and Wang, W. M., 1997, Advances in EDM monitoring and control systems using modern control concepts, International Journal of Electrical Machining, 2, 1-8.
54. Ahmed, M. S., 1988, Adaptive control of the EDM process, SME Technical Paper, MR88-222, pp. 1-11.
55. Wang, W. M. and Rajurkar, K. P., 1992, Modeling and adaptive control of EDM systems, Journal of Manufacturing Systems, 11, 334-345.
56. Rajurkar, K. P., Wang, W. M., and Zhao, W. S., 1997, WEDM-Adaptive control with a multiple input model for identification of workpiece height, Annals of the CIRP, 46, 147-150.
57. Weck, M. and Dehmer, J. M., 1992, Analysis and adaptive control of EDM sinking process using the ignition delay time and fall time as parameter, Annals of the CIRP, 41, 243-246.
58. Kruth, J. P., Snoeys, R., and Van Brussel, H., 1979, Adaptive control optimization of the EDM process using minicomputers, Computers in Industry, 1, 65-75.
59. Rajurkar, K. P., 1981, A physico-mathematical investigation of electrical discharge machining by Data Dependent Systems, PhD thesis, Michigan Technological University, Houghton, MI, p. 287.
60. Rajurkar, K. P. and Wang, W. M., 1990, Real-time stochastic model and control of EDM, Annals of the CIRP, 39, 187-190.
61. Dekeyser, W., Snoeys, R., and Jennes, M., 1988, Expert system for wire cutting EDM, based on pulse classification and thermal modeling, Robotics and Computer-Integrated Manufacturing, Manufacturing Science, Technology and Systems of the Future, 4, 219-224.
62. Filipic, B. and Junkar, M., 2000, Using inductive machine learning to support decision making in machining processes, Computers in Industry, 43, 31-41.
63. Kaneko, T. and Onodera, T., 2004, Improvement in machining performance of die-sinking EDM by using self-adjusting fuzzy control, Journal of Materials Processing Technology, 149, 204-211.
64. Boccadoro, M. and Dauw, D. F., 1995, About the application of fuzzy controllers in high-performance die-sinking EDM machines, Annals of the CIRP, 44, 147-150.
65. Tarng, Y. S., Tseng, C. M., and Chung, L. K., 1997, A fuzzy pulse discriminating system for electrical discharge machining, International Journal of Machine Tools and Manufacture, 37, 511-522.
66. Lin, J. L., Wang, K. S., Yan, B. H., and Tarng, Y. S., 2000, Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics, Journal of Materials Processing Technology, 102, 48-55.
67. Lin, C.-T., Chung, I.-F., and Huang, S.-Y., 2001, Improvement of machining accuracy by fuzzy logic at corner parts for wire-EDM, Fuzzy Sets and Systems, 122, 499-511.
68. Su, J. C., Kao, J. Y., and Tarng, Y. S., 2004, Optimisation of the electrical discharge machining process using a GA-based neural network, International Journal of Advanced Manufacturing Technology, 24, 81-90.
69. Liao, Y. S., Yan, M. T., and Chang, C. C., 2002, A neural network approach for the on-line estimation of workpiece height in WEDM, Journal of Materials Processing Technology, 121, 252-258.
70. Tsai, K.-M. and Wang, P.-J., 2001, Comparisons of neural network models on material removal rate in electrical discharge machining, Journal of Materials Processing Technology, 117, 111-24.
71. Higuerey, E. E., 1998, Neural network modeling of process parameters for electrical discharge machining, PhD thesis, Lehigh University, Bethlehem, PA, p. 186.
72. Zhang, J. H., Zhang, H., Su, D. S., Qin, Y., Huo, M. Y., Zhang, Q. H., and Wang, L., 2002, Adaptive fuzzy control system of a servomechanism for electro-discharge machining combined with ultrasonic vibration, Journal of Materials Processing Technology, 129, 45-49.
73. Yuanfeng, L., Wansheng, Z., and Shichun, D., 2000, The detection of discharge state and neuro-fuzzy control in electrical discharge machining, High Technology Letters, 10, 72-74.
74. Huang, J. T. and Liao, Y. S., 2000, A wire-EDM maintenance and fault-diagnosis expert system integrated with an artificial neural network, International Journal of Production Research, 38, 1071-1082.
75. Kunieda, M., Lauwers, B., Rajurkar, K. P., and Schumacher, B. M., 2005, Advancing EDM through fundamental insight into the process, Annals of the CIRP, 54, 599-622.
76. Altpeter, F. and Perez, R., 2004, Relevant topics in wire electrical discharge machining control, Journal of Materials Processing Technology, 149, 147-151.
77. Rajurkar, K. P. and Wang, W. M., 1991, On-line monitor and control for wire breakage in WEDM, Annals of the CIRP, 40, 219-222.
78. Snoeys, R., Dauw, D., and Kruth, J. P., 1980, Improved adaptive control system for EDM processes, Annals of the CIRP, 29, 97-101.
79. Hocheng, H., Lei, W. T., and Hsu, H. S., 1997, Preliminary study of material removal in electricaldischarge machining of SiC/Al, Journal of Materials Processing Technology, 63, 813-818.
80. Kahng, C. H. and Rajurkar, K. P., 1977, Fundamental theories of the parameters of EDM process, SME Technical Paper Series, MR for Midwest Engineering Conference, Milwaukee, WI.
81. Lee, S. H. and Li, X. P., 2001, Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide, Journal of Materials Processing Technology, 115, 344-358.
82. Huang, J. T. and Liao, Y. S., 2003, Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses, International Journal of Production Research, 41, 1707-1720.
83. Marafona, J. and Wykes, C., 2000, A new method of optimising material removal rate using EDM with copper-tungsten electrodes, International Journal of Machine Tools & Manufacture, 40, 153-164.
84. Klocke, F., Lung, D., Thomaidis, D., and Antonoglou, G., 2004, Using ultra thin electrodes to produce micro-parts with wire-EDM, Journal of Materials Processing Technology, 149, 579-584.
85. Masuzawa, T., Tsukamoto, J., and Fujino, M., 1989, Drilling of deep microholes by EDM, Annals of the CIRP, 38, 195-198.
86. Yu, Z. Y., Rajurkar, K. P., and Shen, H., 2002, High aspect ratio and complex shaped blind micro holes by micro EDM, Annals of the CIRP, 51, 359-362.
87. Wu, K. L., Yan, B. H., Lee, J.-W., and Ding, C. G., 2009, Study on the characteristics of electrical discharge machining using dielectric with surfactant, Journal of Materials Processing Technology, 209, 3783-3789.
88. Mohri, N., Saito, N., and Higashi, M., 1991, New process of finish machining on free surface by EDM methods, Annals of the CIRP, 40, 207-210.
89. Klocke, F., Lung, D., Antonoglou, G., and Thomaidis, D., 2004, The effects of powder suspended dielectrics on the thermal influenced zone by electrodischarge machining with small discharge energies, Journal of Materials Processing Technology, 149, 191-197.
90. Huang, H., Zhang, H., Zhou, L., and Zheng, H. Y., 2003, Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol, Journal of Micromechanics and Microengineering, 13, 693-700.
91. Kunieda, M. and Yoshida, M., 1997, Electrical discharge machining in gas, Annals of the CIRP, 46, 143-146.
92. Kunieda, M., Miyoshi, Y., Takaya, T., Nakajima, N., Bo, Y. Z., and Yoshida, M., 2003, High speed 3D milling by dry EDM, Annals of the CIRP, 52, 147-150.
93. Kunieda, M. and Furudate, C., 2001, High precision finish cutting by dry WEDM, Annals of the CIRP, 50, 121-124.
94. Lonardo, P. M. and Bruzzone, A. A., 1999, Effect of flushing and electrode material on die sinking EDM, Annals of the CIRP, 48, 123-126.
95. Bojorquez, B., Marloth, R. T., and Es-Said, O. S., 2002, Formation of a crater in the workpiece on an electrical discharge machine, Engineering Failure Analysis, 9, 93-97.
96. Luo, Y. F., 1997, The dependence of interspace discharge transitivity upon the gap debris in precision electrodischarge machining, Journal of Materials Processing Technology, 68, 121-131.
97. De Bruijn, H. E. and Pekelharing, A. J., 1978, Effect of a magnetic field on the gap cleaning in EDM, Annals of the CIRP, 27, 93-95.
98. Durgan, P. R., 1989, Fast EDM drilling, SME Technical Paper, EE89-815, pp. 1-10.
99. Masuzawa, T., Cui, X., and Taguchi, T., 1992, Improved jet flushing for EDM, CIRP Annals-Manufacturing Technology, 41, 239-242.
100. Okada, A., Uno, Y., Onoda, S., and Habib, S., 2009, Computational fluid dynamics analysis of working fluid flow and debris movement in wire EDMed kerf, Annals of the CIRP, 58, 209-212.
101. Lee, S., Minami, H., Masui, K., and Okami, M., 2003, EDM with mesh-sheet electrode, International Journal of Electrical Machining, 8, 45-50.
102. Sommer, C., 2000, Non-Traditional Machining Handbook, Advance Publishing, Houston, TX.
103. Yan, B. H., Huang, F. Y., Chow, H. M., and Tsai, J. Y., 1999, Micro-hole machining of carbide by electric discharge machining, Journal of Materials Processing Technology, 87, 139-145.
104. Batzinger, T. J. and Wei, B., 2002, Electromachining with perforated electrodes. U.S. Patent 6, 680, 454, General Electric Company, Niskayuna, NY.
105. Fukuzawa, Y., Tani, T., Ito, Y., Ichinose, Y., and Mohori, N., 1995, Electrical discharge machining (EDM) of insulator ceramics with a sheet of metal mesh. Proceedings of 11th International Symposium for Electromachining, Lausanne, Switzerland. Presses polytechniques et universitaires romandes, Lausanne, Switzerland.
106. Kremer, D., Bazine, G., Moisan, A., Bessaguet, L., Astier, A., and Thanh, N. K., 1983, Ultrasonic machining improves EDM technology. Proceedings of the Seventh International Symposium in Electromachining, Birmingham, U.K. IFS (Publ) Ltd., Kempston, U.K.
107. Komsa, E., 1974, Ultrasonic flushing in electric-discharge machining, IBM Technical Disclosure Bulletin, 16, 3429.
108. Sundaram, M. M., Pavalarajan, G., and Rajurkar, K., 2008, A study on process parameters of ultrasonic assisted micro EDM based on Taguchi method, Journal of Materials Engineering and Performance, 17, 210-215.
109. Wansheng, Z., Zhenlong, W., Shichun, D., Guanxin, C., and Hongyu, W., 2002, Ultrasonic and electric discharge machining to deep and small hole on titanium alloy, Journal of Materials Processing Technology, 120, 101-106.
110. Thoe, T. B., Aspinwall, D. K., and Killey, N., 1999, Combined ultrasonic and electrical discharge machining of ceramic coated nickel alloy, Journal of Materials Processing Technology, 93, 323-328.
111. Zhixin, J., Jianhua, Z., and Xing, A., 1995, Ultrasonic vibration pulse electro-discharge machining of holes in engineering ceramics, Journal of Materials Processing Technology, 53, 811-816.
112. Kremer, D., 1989, Effects of ultrasonic vibrations on the performances in EDM, Annals of the CIRP, 38, 199-202.
113. Gao, C. and Liu, Z., 2003, A study of ultrasonically aided micro-electrical-discharge machining by the application of workpiece vibration, Journal of Materials Processing Technology, 139, 226-228.
114. Zhang, Q. H., Zhang, J. H., Deng, J. X., Qin, Y., and Niu, Z. W., 2002, Ultrasonic vibration electrical discharge machining in gas, Journal of Materials Processing Technology, 129, 135-138.
115. Zhang, J. H., Lee, T. C., Lau, W. S., and Ai, X., 1997, Spark erosion with ultrasonic frequency, Journal of Materials Processing Technology, 68, 83-88.
116. Guo, Z. N., Lee, T. C., Yue, T. M., and Lau, W. S., 1997, A study of ultrasonic-aided wire electrical discharge machining, Journal of Materials Processing Technology, 63, 823-828.
117. Rozenberg, L. D., 1973, Physical Principles of Ultrasonic Technology, Plenum Press, New York.
118. Murti, V. S. R. and Philip, P. K., 1987, An analysis of the debris in ultrasonic-assisted electrical discharge machining, Wear, 117, 241-250.
119. Yeo, S. H. and Tan, L. K., 1999, Effects of ultrasonic vibrations in micro electro-discharge machining of microholes, Journal of Micromechanics and Microengineering, 9, 345-352.
120. Yeo, S. H. and Goh, K. M., 2001, The effect of ultrasound in micro electro discharge machining on surface roughness, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215, 271-276.
121. Murali, M. and Yeo, S. H., 2004, Rapid biocompatible micro device fabrication by micro electro-discharge machining, Biomedical Microdevices, 6, 41-45.
122. Certin, S., Okada, A., and Uno, Y., 2004, Effect of debris accumulation on machining speed in EDM, International Journal of Electrical Machining, 9, 9-14.
123. Soni, J. S. and Chakraverti, G., 1994, Machining characteristics of titanium with rotary electro-discharge machining, Wear, 171, 51-58.
124. Sato, T., Mizutani, T., Yonemochi, K., and Kawata, K., 1986, The development of an electrodischarge machine for micro-hole boring, Precision Engineering, 8, 163-168.
125. Guu, Y. H. and Hocheng, H., 2001, Effects of workpiece rotation on machinability during electricaldischarge machining, Materials and Manufacturing Processes, 16, 91-101.
126. Masuzawa, T., Okajima, K., Taguchi, T., and Fujino, M., 2002, EDM-lathe for micromachining, Annals of the CIRP, 51, 355-358.
127. Ehrfeld, W., Lehr, H., Michel, F., Wolf, A., Gruber, H.-P., and Bertholds, A., 1996, Micro electro discharge machining as a technology in micromachining. Proceedings of the SPIE-The International Society for Optical Engineering Micromachining and Microfabrication Process Technology II, Austin, TX.
128. Masuzawa, T. and Heuvelman, C. J., 1983, Self flushing method with spark-erosion machining, Annals of the CIRP, 32, 109-111.
129. Altan, T., Lilly, B. W., Kruth, J. P., Koenig, W., Toenshoff, H. K., van Luttervelt, C. A., and Khairy, A. B., 1993, Advanced techniques for die and mold manufacturing, Annals of the CIRP, 42, 707-716.
130. Yu, Z. Y., Zhang, Y., Li, J., Luan, J., Zhao, F., and Guo, D., 2009, High aspect ratio micro-hole drilling aided with ultrasonic vibration and planetary movement of electrode by micro-EDM, Annals of the CIRP, 58, 213-216.
131. Lim, H. S., Wong, Y. S., Rahman, M., and Edwin Lee, M. K., 2003, A study on the machining of highaspect ratio micro-structures using micro-EDM, Journal of Materials Processing Technology, 140, 318-325.
132. Han, F., Wachi, S., and Kunieda, M., 2004, Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control, Precision Engineering, 28, 378-385.
133. Guu, Y. H., Hocheng, H., Chou, C. Y., and Deng, C. S., 2003, Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steel, Materials Science and Engineering A, 358, 37-43.
134. Lee, H.-T., Rehbach, W. P., Tai, T.-Y., and Hsu, F.-C., 2003, Surface integrity in micro-hole drilling using micro-electro discharge machining, Materials Transactions, 44, 2718-2722.
135. Lee, H. T. and Tai, T. Y., 2003, Relationship between EDM parameters and surface crack formation, Journal of Materials Processing Technology, 142, 676-683.
136. Zhou, M. and Han, F., 2009, Adaptive control for EDM process with a self-tuning regulator, International Journal of Machine Tools and Manufacture, 49, 462-469.
137. Yu, Z., Rajurkar, K. P., and Prabhuram, P. D., 2001, Study of contouring micro EDM characteristics. 10th International Conference Precision Engineering (ICPE), Yokohama, Japan, Euspen.
138. Michel, F., Ehrfeld, W., Koch, O., and Gruber, H. P., 2000, EDM for micro fabrication-Technology and applications. Proceedings of the International Seminar on Precision Engineering and Micro Technology, Aachen, Germany. Verlag Rhiem, Voerde.
139. Davim, J. P., Maranhão, C., Cabral, G., and Grácio, J., 2009, Performance of cutting tools in machining Cu/W alloys for application in EDM electrodes, International Journal of Refractory Metals and Hard Materials, 27, 676-682.
140. Muttamara, A., Fukuzawa, Y., Mohri, N., and Tani, T., 2009, Effect of electrode material on electrical discharge machining of alumina, Journal of Materials Processing Technology, 209, 2545-2552.
141. Lee, Y. H. and Li, C. L., Automation in the design of EDM electrodes, Computer-Aided Design, 41, 600-613.
142. Yu, Z. Y., Kozak, J., and Rajurkar, K. P., 2003, Modelling and simulation of micro EDM process, Annals of the CIRP, 52, 143-146.
143. IWF and IPT, 2002, Investigation of the International State of the Art of Micro Production Technology, MickroPRO.
144. Masuzawa, T., Fujino, M., Kobayashi, K., Suzuki, T., and Kinoshita, N., 1985, Wire electro-discharge grinding for micro-machining, Annals of the CIRP, 34, 431-434.
145. Masuzawa, T., Yamaguchi, M., and Fujino, M., 2005, Surface finishing of micropins produced by WEDG, Annals of the CIRP, 54, 171-174.
146. Monzón, M., Benítez, A. N., Marrero, M. D., Hernández, N., Hernández, P., and Aisa, J., 2008, Validation of electrical discharge machining electrodes made with rapid tooling technologies, Journal of Materials Processing Technology, 196, 109-114.
147. Habib, M. A., Gan, S. W., and Rahman, M., 2009, Fabrication of complex shape electrodes by localized electrochemical deposition, Journal of Materials Processing Technology, 209, 4453-4458.
148. Takezawa, H., Hamamatsu, H., Mohri, N., and Saito, N., 2004, Development of micro-EDM-center with rapidly sharpened electrode, Journal of Materials Processing Technology, 149, 112-116.
149. Takezawa, H., Itoh, N., and Mohri, N., 2001, The behavior of thin electrode wear in electrical discharge machining. Proceedings of the 13th International Symposium for Electromachining, Bilbao, Spain.
150. Takezawa, H., Mohri, N., and Furutani, K., 2001, Rapid production of a thin electrode by a single discharge machining. I. Machining phenomena and application of formed electrode, Journal of the Japan Society of Precision Engineering, 67, 1299-1303.
151. Yamazaki, M., Suzuki, T., Mori, N. and Kunieda, M., 2004, EDM of micro-rods by self-drilled holes, Journal of Materials Processing Technology, 149, 134-138.
152. Sheu, D.-Y., 2004, Multi-spherical probe machining by EDM: Combining WEDG technology with one- pulse electro-discharge, Journal of Materials Processing Technology, 149, 597-603.
153. Yeo, S. H. and Murali, M., 2003, A new technique using foil electrodes for the electro-discharge machining of micro grooves, Journal of Micromechanics and Microengineering, 13, N1-N5.
154. Murali, M. and Yeo, S. H., 2004, A novel spark erosion technique for the fabrication of high aspect ratio micro-grooves, Microsystem Technologies, 10, 628-632.
155. Ullmann, E., Doll, U., and Piltz, S., 2001, Electrical discharge grinding of microstructures, International Journal of Electrical Machining, 6, 41-46.
156. Song, X., Reynaerts, D., Meeusen, W., and Van Brussel, H., 1999, Investigation of micro-EDM for silicon microstructure fabrication, Proceedings of SPIE-The International Society for Optical Engineering, 3680, 792-799.
157. Yu, Z., Rajurkar, K. P., and Shen, H., 2002, Drilling of noncircular blind micro holes by micro EDM, Transactions of the NAMRC/SME, XXX, 263-270.
158. Yu, Z. Y., Masuzawa, T., and Fujino, M., 1998, 3D micro-EDM with simple shape electrode Part 1, International Journal of Electrical Machining, 3, 7-12.
159. Sharma, A., Iwai, M., Kawanaka, K., Suzuki, K., and Uematsu, T., 2004, Attempt at EDM of electrically conductive diamond and its application to miniature mold processing. Seventh International Symposium on Advances in Abrasive Technology, Bursa, Turkey.
160. Uhlmann, E. and Roehner, M., 2008, Investigations on reduction of tool electrode wear in micro-EDM using novel electrode materials, CIRP Journal of Manufacturing Science and Technology, 1, 92-96.
161. Sharma, A., Iwai, M., Suzuki, K., and Uematsu, T., 2004, Low-wear diamond electrode for micro-EDM of die-steel. Seventh International Symposium on Advances in Abrasive Technology, Bursa, Turkey.
162. Dauw, D. F., 1994, High-precision wire-EDM by online wire positioning control, Annals of the CIRP, 43, 193-197.
163. Xia, H., Kunieda, M., and Nishiwaki, N., 1996, Removal amount difference between anode and cathode in EDM process, International Journal of Electrical Machining, 1, 42-52.
164. Xia, H., Hashimoto, H., Kunieda, M., and Nishiwaki, N., 1996, Measurement of energy distribution in continuous EDM process, Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 62, 1141-1145.
165. Natsu, W., Kunieda, M., and Nishiwaki, N., 2004, Study on influence of inter-electrode atmosphere on carbon adhesion and removal amount, International Journal of Electrical Machining, 9, 43-50.
166. Tsai, Y.-Y. and Masuzawa, T., 2004, An index to evaluate the wear resistance of the electrode in micro-EDM, Journal of Materials Processing Technology, 149, 304-309.
167. Yu, Z. Y., Masuzawa, T., and Fujino, M., 1998, Micro-EDM for three-dimensional cavities-Development of uniform wear method, Annals of the CIRP, 47, 169-172.
168. Sundaram, M. M. and Rajurkar, K. P., 2008, Towards freeform machining by micro electro discharge machining process, Transactions of the North American Manufacturing Research Institution of SME, 36, 381-388.
169. Yuzawa, T., Magara, T., Imai, Y., and Sato, T., 1997, Micro electric discharge scanning using a mini-size cylindrical electrode, Kata Gijutsu, 12, 104-105.
170. Bleys, P., Kruth, J.-P., Lauwers, B., Zryd, A., Delpretti, R., and Tricarico, C., 2002, Real-time tool wear compensation in milling EDM, Annals of the CIRP, 51, 157-160.
171. Narasimhan, J., Yu, Z., and Rajurkar, K. P., 2004, Tool wear compensation and path generation in micro and macro EDM, Transactions of NAMRI/SME, 32, 151-158.
172. Tai, T. Y. and Lu, S. J., 2009, Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks, International Journal of Fatigue, 31, 433-438.
173. Machinability Data Center, 1980, Machining Data Handbook, 3rd edn., MDC, Cincinnati, OH.
174. Lai, L.-C., Chiou, W.-A., and Earthman, J. C., Influence of electrical discharged machining and surface defects on the fatigue strength of electrodeposited nanocrystalline Ni, International Journal of Fatigue, 32, 584-591.
175. Ghrib, T., Salem, S. B., and Noureddine, Y., 2009, EDM effects on the thermal properties of 36NiCrMo16 steel, Tribology International, 42, 391-396.
176. Newton, T. R., Melkote, S. N., Watkins, T. R., Trejo, R. M., and Reister, L., 2009, Investigation of the effect of process parameters on the formation and characteristics of recast layer in wire-EDM of Inconel 718, Materials Science and Engineering: A, 513-514, 208-215.
177. Bonny, K., De Baets, P., Quintelier, J., Vleugels, J., Jiang, D., Van der Biest, O., Lauwers, B., and Liu, W., Surface finishing: Impact on tribological characteristics of WC-Co hardmetals, Tribology International, 43, 40-54.
178. Bonny, K., De Baets, P., Ost, W., Vleugels, J., Huang, S., Lauwers, B., and Liu, W., 2009, Influence of electrical discharge machining on the reciprocating sliding wear response of WC-Co cemented carbides, Wear, 266, 84-95.
179. Kruth, J.-P., Stevens, L., Froyen, L., and Lauwers, B., 1995, Study of the white layer of a surface machined by die-sinking electro-discharge machining, Annals of the CIRP, 44, 169-172.
180. Liao, Y. S., Huang, J. T., and Chen, Y. H., 2004, A study to achieve a fine surface finish in Wire-EDM, Journal of Materials Processing Technology, 149, 165-171.
181. Yu, Z. Y., Rajurkar, K. P., and Narasimhan, J., 2003, Effect of machining parameters on machining performance of micro EDM and surface integrity. Proceedings of the 18th Annual Meeting of American Society for Precision Engineering, Portland, OR.
182. Kawakami, K. and Kunieda, M., 2005, Study on factors determining limits of minimum machinable size in micro EDM, Annals of the CIRP, 54, 167-170.
183. Han, F., Yamagata, Y., Kawakami, T., and Kunieda, M., 2003, Investigation on feasibility of sub- micrometer order manufacturing using micro-EDM, Proceedings of the 18th Annual ASPE Meeting, Portland, OR.
184. Han, F., Yamada, Y., Kawakami, T., and Kunieda, M., 2006, Experimental attempts of sub-micrometer order size machining using micro-EDM, Precision Engineering, 30, 123-131.
185. Egashira, K. and Mizutani, K., 2005, EDM at low open-circuit voltage, International Journal of Electrical Machining, 10, 21-26.
186. Kruth, J.-P. and Bleys, P., 2000, Measuring residual stress caused by Wire EDM of tool steel, International Journal of Electrical Machining, 5, 23-28.
187. Klocke, F. and Lung, D., 2001, Micro contouring by EDM with fine wires, Proceedings of the13th International Symposium for Electromachining, Bilbao, Spain.
188. Yan, M.-T. and Huang, P.-H., 2004, Accuracy improvement of wire-EDM by real-time wire tension control, International Journal of Machine Tools and Manufacture, 44, 807-814.
189. Yan, M.-T., Huang, C.-W., Fang, C.-C., and Chang, C.-X., 2004, Development of a prototype Micro-Wire-EDM machine, Journal of Materials Processing Technology, 149, 99-105.
190. Tani, T., Fukuzawa, Y., Mohri, N., Saito, N., and Okada, M., 2004, Machining phenomena in WEDM of insulating ceramics, Journal of Materials Processing Technology, 149, 124-128.
191. Sheu, D.-Y., Masuzawa, T., and Fujino, M., 1997, Machining of deep micro holes by EDM, Proceedings of the Annual Assembly of JSEME, 105-108.
192. Koch, O., Ehrfeld, W., Michel, F., and Gruber, H. P., 2001, Recent progress in micro-electro discharge machining-part 1. Proceedings of the 13th International Symposium for Electromachining, Bilbao, Spain.
193. Masaki, T., Kawata, K., and Masuzawa, T., 1990, Micro electro-discharge machining and its applications. Proceedings of the IEEE Micro Electro Mechanical Systems: An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots, Napa Valley, CA. IEEE, Piscataway, NJ.
194. Okada, A., Uno, Y., Okamoto, H., Tanaka, H., and Okada, S., 2001, A new micro EDM technique of monocrystalline silicon using fine triangular section electrode, Proceedings of the 13th International Symposium for Electromachining, Bilbao, Spain.
195. Song, X., Meeusen, W., Reynaerts, D., and Van Brussel, H., 2000, Experimental study of micro-EDM machining performances on silicon wafer. Micromachining and Microfabrication Process Technology VI, Santa Clara, CA. Society of Photo-Optical Instrumentation Engineers, Bellingham, WA.
196. Reynaerts, D., Meeusen, W., Song, X., Van Brussel, H., Reyntjens, S., De Bruyker, D., and Puers, R., 2000, Integrating electro-discharge machining and photolithography: Work in progress, Journal of Micromechanics and Microengineering, 10, 189-195.
197. Masuzawa, T., 1998, Recent trends in EDM/ECM technologies in Japan, Proceedings of the 12th International Symposium for Electromachining, Aachen, Germany.
198. Kawata, K., Fujimura, H., and Nishimur, K., 2004, Micro-electrodischarge machining of single-crystal diamond for micro-dies. Seventh International Symposium on Advances in Abrasive Technology, Bursa, Turkey.
199. Morgan, C. J., Vallance, R. R., and Marsh, E. R., 2004, Micro machining glass with polycrystalline diamond tools shaped by micro electro discharge machining, Journal of Micromechanics and Microengineering, 14, 1687-1692.
200. Albert, M., Wire EDM goes horizontal, Modern Machine Shop, November 2004.
201. Liao, Y.-S., Chen, S.-T., and Lin, C.-S., 2005, Development of a high precision tabletop versatile CNC wire-EDM for making intricate micro parts, Journal of Micromechanics and Microengineering, 15, 245-253.
202. Gusseff, W., 1930, Method and apparatus for the electrolytic treatment of metals, British Patent 335,003.
203. Bannard, J., 1977, Electrochemical machining, Journal of Applied Electrochemistry, 7, 1-29.
204. McGeough, J. A., 1974, Principles of Electrochemical Machining, Chapman & Hall; Halsted Press Division, Wiley, London, U.K.
205. Wilson, J. F., 1971, Practice and Theory of Electrochemical Machining, Wiley-Interscience, New York.
206. Schuster, R., Kirchner, V., Allongue, P., and Ertl, G., 2000, Electrochemical micromachining, Science, 289, 98-101.
207. Bhattacharyya, B. and Munda, J., 2003, Experimental investigation on the influence of electrochemical machining parameters on machining rate and accuracy in micromachining domain, International Journal of Machine Tools and Manufacture, 43, 1301-1310.
208. McGeough, J. A. and Thomson, J. R., 1986, Some effects of electrolyte flow in the electroforming of iron foil, Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 200, 111-122.
209. McGeough, J. A. and Rasmussen, H., 1990, A theoretical analysis of electrochemical arc machining, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 429, 429-447.
210. De Silva, A. and McGeough, J. A., 1986, Surface effects on alloys drilled by electrochemical arc machining, Proceedings of the Institution of Mechanical Engineers, Part B: Management and Engineering Manufacture, 200, 237-246.
211. Bhattacharyya, B., Mitra, S., and Boro, A. K., 2002, Electrochemical machining: New possibilities for micromachining, Robotics and Computer-Integrated Manufacturing, 18, 283-289.
212. Kim, B. H., Na, C. W., Lee, Y. S., Choi, D. K., and Chi, C. N., 2005, Micro electrochemical machining of 3D micro structure using dilute sulfuric acid, Annals of the CIRP, 54, 191-194.
213. Sen, M. and Shan, H. S., 2005, A review of electrochemical macro- to micro-hole drilling processes, International Journal of Machine Tools and Manufacture, 45, 137-152.
214. Sharma, S., Jain, V. K., and Shekhar, R., 2002, Electrochemical drilling of inconel superalloy with acidified sodium chloride electrolyte, International Journal of Advanced Manufacturing Technology, 19, 492-500.
215. Basak, I. and Ghosh, A., 1997, Mechanism of material removal in electrochemical discharge machining:A theoretical model and experimental verification, Journal of Materials Processing Technology, 71, 350-359.
216. Crichton, I. M. and McGeough, J. A., 1984, Theoretical, experimental and computational aspects of the electrochemical arc machining process, Annals of the CIRP, 33, 429-432.
217. Kozak, J. and M, P., 1989, Electrochemical arc cutting, Proceedings of ISEM, 9, 103-106.
218. Fascio, V., Wuthrich, R., and Bleuler, H., 2004, Spark assisted chemical engraving in the light of electrochemistry, Electrochimica Acta, 49, 3997-4003.
219. Kita, Y. and Ajiro, H., 1986, Influence of electrochemical discharge phenomena on fine ceramics, Journal of the Society of Materials Science, Japan, 35, 1418-1424.
220. Bhattacharyya, B., Doloi, B. N., and Sorkhel, S. K., 1999, Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials, Journal of Materials Processing Technology, 95, 145-154.
221. Kurafuji, H. and Suda, K., 1968, Electrical discharge drilling of glass-I, Annals of the CIRP, 16/4, 415.
222. De Silva, A. and McGeough, J., 1989, The production of full die shapes by electrochemical arc/electrochemical machining, Proceedings of the ISEM, 9, 107-110.
223. Sarkar, B. R., Doloi, B., and Bhattacharyya, B., 2006, Parametric analysis on electrochemical discharge machining of silicon nitride ceramics, The International Journal of Advanced Manufacturing Technology, 28, 873-881.
224. Han, M.-S., Min, B.-K., and Lee, S. J., 2008, Modeling gas film formation in electrochemical discharge machining processes using a side-insulated electrode, Journal of Micromechanics and Microengineering, 18, 1-8.
225. Zheng, Z.-P., Lin, J.-K., Huang, F.-Y., and Yan, B.-H., 2008, Improving the machining efficiency in electrochemical discharge machining (ECDM) microhole drilling by offset pulse voltage, Journal of Micromechanics and Microengineering, 18, 1-6.
226. Ghosh, A., 1997, Electrochemical discharge machining: Principle and possibilities, Sadhana, 22, 435-447.
227. Schopf, M., 2002, Dressing of metal-bond grinding wheels by ECDM, Industrial Diamond Review, 62, 82-85.
228. Peng, W. Y. and Liao, Y. S., 2004, Study of electrochemical discharge machining technology for slicing non-conductive brittle materials, Journal of Materials Processing Technology, 149, 363-369.
229. Drake, T. H. and McGeough, J. A., 1982, Aspects of drilling by electrochemical arc machining, Proceedings of the 22nd International Machine Tool Design and Research Conference, Manchester, U.K.
230. McGeough, J. A., Khayry, A. B. M., Munro, W., and Crookall, J. R., 1983, Theoretical and experimental investigation of the relative effects of spark erosion and electrochemical dissolution in electrochemical ARC machining, Annals of the CIRP, 32, 113-118.
231. Zheng, Z.-P., Cheng, W.-H., Huang, F.-Y., and Yan, B.-H., 2007, 3D microstructuring of Pyrex glass using the electrochemical discharge machining process, Journal of Micromechanics and Microengineering, 17, 960-966.
232. West, J. and Jadhav, A., 2007, ECDM methods for fluidic interfacing through thin glass substrates and the formation of spherical microcavities, Journal of Micromechanics and Microengineering, 17, 403-409.
233. Kim, D.-J., Ahn, Y., Lee, S.-H., and Kim, Y.-K., 2006, Voltage pulse frequency and duty ratio effects in an electrochemical discharge microdrilling process of Pyrex glass, International Journal of Machine Tools and Manufacture, 46, 1064-1067.
234. Zheng, Z.-P., Su, H.-C., Huang, F.-Y., and Yan, B.-H., 2007, The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge microdrilling process, Journal of Micromechanics and Microengineering, 17, 265-272.
235. Chak, S. K. and Venkateswara Rao, P., 2008, The drilling of Al2O3 using a pulsed DC supply with a rotary abrasive electrode by the electrochemical discharge process, International Journal of Advanced Manufacturing Technology, 39, 633-641.
236. Cavallotti, P. L., 2005, Editorial, Electrochimica Acta, 50, 4523-4524.
237. Brown, J. A., 1991, Modern Manufacturing Processes, Industrial Press, New York.
238. Watson, S. A., 1989, Modern electroforming, Transactions of the Institute of Metal Finishing, 67, pt 4, 89-94.
239. McGeough, J. A., Leu, M. C., Rajurkar, K. P., De Silva, A. K. M., and Liu, Q., 2001, Electroforming process and application to micro/macro manufacturing, Annals of the CIRP, 50, 499-514.
240. Lin, T.-H., Hung, S.-Y., Yang, H., and Chao, C.-K., 2007, Fabrication of a microlens array electroformed mold with low roughness and high hardness, Journal of Micromechanics and Microengineering, 17, 419-425.
241. Brown, R., 2003, Electroplating, in RF/Microwave Hybrids, Kluwer Academic Publishers, Dordrecht, the Netherlands, pp. 169-184.
242. Cotell, C. M. et al., 1995, ASM Handbook, Volume 5: Surface Engineering, ASM International, Materials Park, OH.
243. Watts, O. P., 1916, Rapid nickel plating, Transactions of American Electrochemical Society, 29, 395.
244. Kruglikov, S. S., Kudriavtsev, N. T., Vorobiova, G. F., and Antonov, A. Y. A., 1965, On the mechanism of levelling by addition agents in electrodeposition of metals, Electrochimica Acta, 10, 253-261.
245. Mandich, N. V., 2002, Pulse and pulse-reverse electroplating, Metal Finishing, 100, 359-364.
246. Tang, P. T., Jaskula, M., Kubiczek, M., Mizushima, I., Pantleon, K., and Arentoft, M., 2009, Pulse reversal plating of nickel-cobalt alloys, Transactions of the Institute of Metal Finishing, 87, 72-77.
247. Anonymous, 1939, Brush plating, Iron Age, 143, 39.
248. Rubinstein, M., 1954, Brush plating now practical, Materials and Methods, 40, 98-101.
249. Sole, M. J., 1994, Electroforming: Methods, materials, and merchandise, JOM, 46, 29-35.
250. Tang, P.T., Dylmer, H., and Møller, P., 1995, Nickel coatings and electroforming using pulse reversal plating, Metal Finishing AESF SUR/FIN, 93, 529-536.
251. Amblard, J., Epelboin, I., Froment, M., and Maurin, G., 1979, Inhibition and nickel electrocrystallization, Journal of Applied Electrochemistry, 9, 233-242.
252. Hsieh, J.-C., Hu, C.-C., and Lee, T.-C., 2008, The synergistic effects of additives on improving the electroplating of zinc under high current densities, Journal of the Electrochemical Society, 155, D675-D681.
253. Xi, W., Qiao, Z., Zhu, C., Jia, A., and Li, M., 2009, The preparation of lotus-like super-hydrophobic copper surfaces by electroplating, Applied Surface Science, 255, 4836-4839.
254. Povetkin, V. V., Shibleva, T. G., and Zhitnikova, A. V., 2008, Electroplating lead-indium alloy from trilonate solutions in a magnetic field, Protection of Metals, 44, 487-489.
255. Wang, C., Zhong, Y.-B., Wang, J., Wang, Z.-q., Ren, W.-L., Lei, Z.-S., and Ren, Z.-M., 2009, Effect of magnetic field on electroplating Ni/nano-Al2O3 composite coating, Journal of Electroanalytical Chemistry, 630, 42-48.
256. Park, B.-N., Sohn, Y.-S., and Choi, S.-Y., 2008, Effects of a magnetic field on the copper metallization using the electroplating process, Microelectronic Engineering, 85, 308-314.
257. Mitooka, Y., Murakami, K., Hino, M., Takamizawa, M., and Takada, J., 2009, Effect of laser irradiation on generation and growth of whiskers in tin-electroplated film, Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 73, 226-233.
258. Ohsaka, T., Isaka, M., Hirano, K., and Ohishi, T., 2008, Effect of ultrasound sonication on electroplating of iridium, Ultrasonics Sonochemistry, 15, 283-288.
259. Zhang, X., Tu, K. N., Chen, Z., Tan, Y. K., Wong, C. C., Mhaisalkar, S. G., Li, X. M., Tung, C. H., and Cheng, C. K., 2008, Pulse electroplating of copper film: A study of process and microstructure, Journal of Nanoscience and Nanotechnology, 8, 2568-2574.
260. Ning, Z., He, Y. and Gao, W., 2008, Mechanical attrition enhanced Ni electroplating, Surface and Coatings Technology, 202, 2139-2146.
261. Saile, V., 2009, LIGA and Its Applications, Wiley-VCH, Weinheim, U.K.
262. Liu, G., Huang, X., Xiong, Y., and Tian, Y., 2008, Fabricating HARMS by using megasonic assisted electroforming, Microsystem Technologies, 14, 1223-1226.
263. Li, J.-S., Xue, Y.-J., Lan, M.-M., Liu, Y., and Yu, Y.-J., 2009, Effects of ultrasound on microstructures and properties of Ni-CeO2 nanocomposite electroforming deposits, Chinese Journal of Nonferrous Metals, 19, 517-522.
264. Holstein, N., Schanz, G., Konys, J., Piotter, V., and Ruprecht, R., 2005, Metallic microstructures by electroforming from conducting polymer templates, Microsystem Technologies, 11, 179-185.
265. Zhu, D. and Zeng, Y. B., 2008, Micro electroforming of high-aspect-ratio metallic microstructures by using a movable mask, Annals of the CIRP, 57, 227-230.
266. Chan, K. C., Chan, W. K., and Qu, N. S., 1999, Effect of current waveform on the deposit quality of electroformed nickels, Journal of Materials Processing Technology, 89-90, 447-450.
267. Wong, K. P., Chan, K. C., and Yue, T. M., 2001, Study of hardness and grain size in pulse current electroforming of nickel using different shaped waveforms, Journal of Applied Electrochemistry, 31, 25-34.
268. Yang, J. M., Zhu, D., and Kim, D. H., 2008, Influence of high frequency pulse current on properties of electroformed nanocrystalline Ni-Mn alloys, Transactions of the Institute of Metal Finishing, 86, 98-102.
269. Huang, C.-H., 1993, Effect of organic additives on electroformed nickel alloys, Metal Finishing, 91, 107-110.
270. Huang, C.-H. O., 1999, Effect of imides on nickel-tungsten alloy electroforming, Journal of Materials Science, 34, 1373-1377.
271. Lim, J. H., Park, E. C., Joo, J., and Jung, S.-B., 2009, Effect of additives on microstructure and mechanical properties of nickel plate/mask fabricated by electroforming process, Journal of the Electrochemical Society, 156, D108-D112.
272. Zhu, Z.-W., Zhu, D., Qu, N.-S., Wang, K., and Yang, J.-M., 2008, Electroforming of revolving parts with near-polished surface and uniform thickness, International Journal of Advanced Manufacturing Technology, 39, 1164-1170.
273. Toenshoff, H. K., Egger, R., and Klocke, F., 1996, Environmental and safety aspects of electrophysical and electrochemical processes, Annals of the CIRP, 45, 553-568.
274. Hamid, Z. A. and Aal, A. A., 2009, New environmentally friendly noncyanide alkaline electrolyte for copper electroplating, Surface and Coatings Technology, 203, 1360-1365.
275. Mason, T. J., Lorimer, J. P., Saleem, S., and Paniwnyk, L., 2001, Controlling emissions from electroplating by the application of ultrasound, Environmental Science and Technology, 35, 3375-3377.
276. http://www.cdphe.state.co.us/el/library/metal/Electroplating.pdf
277. Priya, P. G., Basha, C. A., Ramamurthi, V., and Begum, S. N., 2009, Recovery and reuse of Ni(II) from rinsewater of electroplating industries, Journal of Hazardous Materials, 163, 899-909.
278. Pereira, F. V., Gurgel, L. V. A., De Aquino, S. F., and Gil, L. F., 2009, Removal of Zn2+ from electroplating wastewater using modified wood sawdust and sugarcane bagasse, Journal of Environmental Engineering, 135, 341-350.
279. Chen, S.-S., Li, C.-W., Hsu, H.-D., Lee, P.-C., Chang, Y.-M., and Yang, C.-H., 2009, Concentration and purification of chromate from electroplating wastewater by two-stage electrodialysis processes, Journal of Hazardous Materials, 161, 1075-1080.
280. Panayotova, T., Dimova-Todorova, M., and Dobrevsky, I., 2007, Purification and reuse of heavy metals containing wastewaters from electroplating plants, Desalination, 206, 135-140.
281. Li, C.-T., Lee, W.-J., Huang, K.-L., Fu, S.-F., and Lai, Y.-C., 2007, Vitrification of chromium electroplating sludge, Environmental Science and Technology, 41, 2950-2956.
282. Jung, S.-M., Cho, Y.-M., and Na, H.-G., 2007, Chemical analysis of zinc electroplating solutions by x-ray fluorescence spectrometry, ISIJ International, 47, 853-859.