Machine tool feed drives

CIRP Annals - Manufacturing Technology

Volumn 60, Issue 2, 2011, Pages 779-796

  Altintas, Y ^a   Verl, A ^b   Brecher, C ^c   Uriarte, L ^d   Pritschow, G ^b  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

^b UNIVERSITY OF STUTTGART   (Germany)

^c RWTH AACHEN UNIVERSITY   (Germany)

^d IK4 TEKNIKER   (Spain)

Author keywords

Drive; Feed; Machine tool

Indexed keywords

BALL SCREWS; DRIVES; FEEDING; LINEAR MOTORS; MACHINE TOOL DRIVES; MACHINE TOOLS; MAGNETIC LEVITATION; MAGNETIC LEVITATION VEHICLES;

ANALYSIS AND CONTROLS; COMPLIANCE MODEL; DESIGN AND CONTROL; ELECTRICAL MOTORS; ENGINEERING PRINCIPLES; FEED DRIVE SYSTEMS; MACHINE TOOL FEED DRIVES; VIRTUAL MODELING;

MECHANICAL DRIVES;

EID: 80051670756     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2011.05.010     Document Type: Article

References (137)

1. G. Aguirre, F. Al-Bender, and H. Van Brussel A Multiphysics Model for Optimizing the Design of Active Aerostatic Thrust Bearings Precision Engineering 34 3 2010 507 515
2. F. Al-Bender On the Modelling of the Dynamic Characteristics of Aerostatic Bearings Films: From Stability Analysis to Active Compensation Precision Engineering 33 2 2009 117 126
3. Y. Altintas Manufacturing Automation 2000 Cambridge University Press Cambridge, UK
4. Y. Altintas Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurements Transactions of ASME, Journal of Engineering for Industry 114 1992 386 392 (Pubitemid 23581982)
5. Y. Altintas, C. Brecher, M. Weck, and S. Witt Virtual Machine Tool Annals of the CIRP 54 2 2005 651 674 (Pubitemid 43204296)
6. Y. Altintas, K. Erkorkmaz, and W.-H. Zhu Sliding Mode Controller Design for High Speed Feed Drives Annals of CIRP 49 1 2000 265 270
7. Y. Altintas, and C. Okwudire Dynamic Stiffness Enhancement of Direct-Driven Machine Tools using Sliding Mode Control with True Disturbance Recovery Annals of CIRP 58 1 2009 335 338
8. T. Aoyama, K. Koizumi, Y. Kakinuma, and Y. Kobayashi Numerical and Experimental Analysis of Transient State Micro-bounce of Aerostatic Guideways Caused by Small Pores Annals of the CIRP 58 1 2009 367 370
9. T. Aoyama, Y. Kakinuma, and Y. Kobayashi Numerical and Experimental Analysis for Small Vibration of Aerostatic Guideways Annals of the CIRP 55 1 2006 419 422 (Pubitemid 44578445)
10. A. Arias, L. Romeral, E. Aldabas, and M. Jayne Stator Flux Optimised Direct Torque Control System for Induction Motors Electric Power Systems Research 73 3 2005 257 265 (Pubitemid 40120584)
11. A. Ast, S. Braun, P. Eberhard, and U. Heisel Adaptronic Vibration Damping for Machine Tools Annals of the CIRP 56 1 2007 379 382 (Pubitemid 46898321)
12. A. Baehr, and P. Mutschler Comparison of Speed Acquisition Methods based on Sinusoidal Encoder Signals Journal of Electrical Engineering. Edition 4 2006 1582 4594
13. J. Berkemer, R. Altenburger, T. Koch, and W.-D. Lehner Effektive Nutzung des Leistungspotenzials von Direktantrieben wt Werkstattstechnik 2004 Springer Berlin online Jahrgang 94 H. 5
14. C. Brecher, A. Schulz, and M. Weck Electrohydraulic Active Damping System Annals of the CIRP 54 1 2005 389 392 (Pubitemid 40948482)
15. A. Bünte, and S. Beineke High-Performance Speed Measurement by Suppression of Systematic Resolver and Encoder Errors IEEE Transactions on Industrial Electronics 5 1 2004 49 53
16. R. Brown, S. Schneider, and M. und Mulligan Analysis of Algorithms for Velocity Estimation from Discrete Position Versus Time Data IEEE Transactions on Industrial Electronics 39 1 1992 11 19
17. Y. Chen, and J. Tlusty Effect of Low-Friction Guideways and Lead-Screw Flexibility on Dynamics of High-Speed Machines Annals of the CIRP 44 1 1995 353 356
18. Y.-D. Chen, C.-C. Fuh, and P.-C. Tung Application of Voice Coil Motors in Active Dynamic Vibration Absorbers IEEE Transactions on Magnetics 41 2005 1149 1154 (Pubitemid 40421696)
19. C.-W. Cheng, and M.-C. Tsai Real-time Variable Feed Rate NURBS Curve Interpolator for CNC Machining International Journal of Advanced Manufacturing Technology 23 11-12 2004 865 873
20. C. Choi, and T.-C. Tsao Control of Linear Motor Machine Tool Feed Drives for End Milling: Robust MIMO Approach Mechatronics 15 2005 1207 1224 (Pubitemid 41336571)
21. B. Chung, S. Smith, and J. Tlusty Active Damping of Structural Modes in High-Speed Machine Tools Journal of Vibration and Control 3 1997 279 295 (Pubitemid 127596360)
22. J.F. Cuttino, T.A. Dow, and B.F. Knight Analytical and Experimental Identification of Nonlinearities in a Single-Nut, Preloaded Ball Screw ASME Journal of Mechanical Design 119 1 1997 15 19 (Pubitemid 127709699)
23. A. Dadalau, M. Mottahedi, G. Groh, and A. Verl Parametric Modeling of Ball Screw Spindles Production Engineering 4 6 2010 625 631
24. B. Denkena, S. Brehmeier, and H.-C. Möhring Active Linear Guidances for Micro Actuators: Alternative Concepts and First Prototypes Journal of Microsystem Technologies 14 12 2008 1961 1973
25. B. Denkena, F. Hackeloeer, and C.-C. Neuber 5-DOF Harmonic Frequency Control Using Contactless Magnetic Guides CIRP Journal of Manufacturing Science and Technology 2 1 2009 21 28
26. B. Denkena, H.K. Tönshoff, X. Li, J. Imiela, and C. Lapp Analysis and Control/Monitoring of the Direct Linear Drive in End Milling International Journal of Production Research 42 24 2004 5149 5166
27. B. Denkena, P. Hesse, and O. Gümmer Energy Optimized Jerk-decoupling Technology for Translatory Feed Axes Annals of CIRP 58 1 2009 339 342
28. B. Denkena, F. Kallage, M. Ruskowski, K. Popp, and H.K. Tönshoffr Machine Tool with Active Magnetic Guides Annals of the CIRP 53 1 2004 333 336
29. B. Denkena, J. Li, and D. Kopp An Aerostatic Linear Guidance for Microsystems Annals of the German Academic Society for Production Engineering XI 2 2004 203 208
30. A. Dietmair, and A. Verl Drive Based Vibration Reduction for Production Machines Modern Machinery Science Journal 3 4 2009 Prague, Czech Republic
31. N.N., DIN 69051-3: Werkzeugmaschinen; Kugelgewindetriebe; Abnahmebedingungen und Abnahmeprüfungen, Mai 1998.
32. N.N., DIN69051-4: Kugelgewindetriebe-Berechnung der statischen und dynamischen Tragzahl sowie der Lebensdauer, Entwurf April 1989.
33. N.N., DIN69051-5: Werkzeugmaschinen; Kugelgewindetriebe; Anschlussmaße für Kugelgewindemuttern, September 1992.
34. D. Dumur, P. Boucher, and G. Ramond Direct Adaptive Generalized Predictive Control. Application to Motor Drives with Flexible Modes Annals of the CIRP 49 1 2000 271 274
35. T.O. Ekinci, J.R.R. Mayer, and G.M. Cloutier Investigation of Accuracy of Aerostatic Guideways International Journal of Machine Tools & Manufacturing 49 6 2009 478 487
36. Eloundou RF, Singhose WE (2003) Command Generation Combining Input Shaping and Smooth Base-line Functions, US Patent Application Publication US0218440A1, US Patent Office.
37. K. Erkorkmaz, and Y. Altintas High Speed CNC System Design. Part II. Modeling and Identification of Feed Drives International Journal of Machine Tools and Manufacture 41 10 2001 1487 1509 (Pubitemid 32405085)
38. K. Erkorkmaz, Y. Altintas, and C.H. Yeung Virtual Computer Numerical Control System Annals of CIRP 55 1 2006 399 402
39. K. Erkorkmaz, and A. Kamalzadeh High Bandwidth Control of Ball Screw Drives Annals of the CIRP 55 1 2006 393 398 (Pubitemid 44578439)
40. K. Erkorkmaz, J.M. Gorniak, and D.J. Gordon Precision Machine Tool X-Y Stage Utilizing a Planar Air Bearing Arrangement Annals of CIRP 59 1 2010 425 428
41. I. Etxaniz, A. Izpizua, M. San Martin, and J. Arana Magnetic Levitated 2D Fast Drive IEEJ Transactions on Industry Applications 126 12 2006 1678 1681
42. A. Verl, and S. Frey Correlation between Feed Velocity and Preloading in Ball Screw Drives CIRP Annals 59 1 2010 429 432
43. S. Frey, M. Walther, and A. Verl Periodic Variation of Preloading in Ball Screws Production Engineering 4 2 2010 261 267
44. Y.B. Gianchandani, O. Tabata, and H. Zappe Comprehensive Microsystems vol. 2 2008 Elsevier Amsterdam/Heidelberg ISBN 978-0-444-52192-7
45. S. Gleich Approach for Simulating Ball Screws in Thermal Finite Element Simulation, Workshop on Supervising and Diagnostics of Machining Systems Journal of Machine Engineering 7 1 2007 101 107
46. K. Großmann, and J. Müller Untersuchungsergebnisse zur Wirksamkeit der Impulskompensation von Lineardirektantrieben ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 104 9 2009 S761 S767
47. H.U. Golz, and H. Weule Vorspannungsregelung im Kugelgewindetrieb - ein neuer Ansatz für den Werkzeugmaschinenbau? Wt Werkstattstechnik 80 1990 Springer 366-368
48. Hara R (1989) Apparatus for Controlling Acceleration and Deceleration for Servo Control, European Patent EP 0378708 A1, Paris.
49. S. Huang, S. Luo, F. Leonardi, and T.A. Lipo A Comparison of Power Density for Axial Flux Machines Based on the General Purpose Sizing Equation IEEE Transactions on Energy Conversion 14 2 1999 185 192
50. C.L. Hwang, and Y.M. Chen Discrete Sliding-mode Tracking Control of High-displacement Piezoelectric Actuator Systems ASME Journal of Dynamic Systems, Measurement and Control 126 2004 721 725
51. M. Heng, and K. Erkorkmaz Design of a NURBS Interpolator with Minimal Feed Fluctuation and Continuous Feed Modulation Capability International Journal of Machine Tools & Manufacturing 50 2010 281 293
52. Z. Jamaludin, H.V. Brussel, and J. Swevers Classical Cascade and Sliding Mode Control Tracking Performances for a XY Feed Table of a High-speed Machine Tool International Journal of Precision Technology 1 1 2007 65 74
53. Z. Jamaludin, H. Van Brussel, G. Pipeleers, and J. Swevers Accurate Motion Control of XY High-Speed Linear Drives using Friction Model Feed-Forward and Cutting Forces Estimation Annals of the CIRP 57 1 2008 403 406
54. J.W. Jeon, and Y.Y. Ha A Generalized Approach for the Acceleration and Deceleration of Industrial Robots and CNC Machine Tools IEEE Transactions on Industrial Electronics 47 1 2000 133 139
55. S.Y. Jeon, and K.H. Kim A Fluid Film Model for Finite Element Analysis of Structures with Linear Hydrostatic Bearings Proceedings of the Institution of Mechanical Engineering, Part C: Journal of Mechanical Engineering Science 218 3 2004 309 316 (Pubitemid 38522424)
56. S.D. Jones, and A.G. Ulsoy An Approach to Control Input Shaping with Application to Coordinate Measuring Machines ASME Journal of Dynamic Systems Measurement Control 21 2 1999 242 247
57. A. Kamalzadeh, and K. Erkorkmaz Compensation of Axial Vibrations in Ball Screw Drives Annals of the CIRP 56 1 2007 373 378 (Pubitemid 46898320)
58. A. Kamalzadeh, and K. Erkorkmaz Accurate Tracking Controller Design for High Speed Drives International Journal of Machine Tools & Manufacturing 47 2007 1393 1400 (Pubitemid 46550784)
59. R.C. Kavanagh Improved Digital Tachometer With Reduced Sensitivity to Sensor Nonideality IEEE Transactions on Industrial Electronics 47 4 2000 890 897
60. M.-S. Kim, and S.-C. Chung Integrated Design Methodology of Ball-Screw Driven Servomechanisms with Discrete Controllers. Part I. Modelling and Performance Analysis Mechatronics 16 2006 491 502 (Pubitemid 44137472)
61. Knorr M (2001) Impulsgekoppelter TransmissionsantriebEuropean Patent and Trademark Office, Patent Specification EP 1 247 613 B1 (date of filing 06.04.2001).
62. Y. Koren, and C.C. Lo Advanced Controllers for Feed Drives Annals of the CIRP 41 2 1992 689 698 (Pubitemid 23606286)
63. Y. Koren Control of Machine Tools Transactions of ASME, Journal of Manufacturing Science and Engineering 110 1997 749 755 (Pubitemid 127680562)
64. Künzel S, et al. (2002) Verfahren zur Dämpfung mechanischer Schwingungen von Achsen von Werkzeugmaschine. German Patent and Trademark Office, Patent specification DE 102 46 093C 1, Siemens AG, München (date of filing 02.10.2002).
65. Ladra U, Schäfers E, Schür T (2007) Operating Method for an Assembly Having a Mechanically Movable Element, Patent Application WO 2007/115874 A1.
66. S.H. Lee, and J.B. Song Acceleration Estimator for Low-velocity and Low-acceleration Regions Based on Encoder Position Data IEEE/ASME Transaction on Mechatronics 6 1 2001 58 64
67. M.C. Lin, B. Ravani, and S.A. Velinsky Kinematics of the Ball Screw Mechanism ASME Journal of Mechanical Design 116 1994 849 855
68. L. Márton, and B. Lantos Control of Mechanical Systems with Stribeck Friction and Backlash Systems & Control Letters 58 2 2009 141 147
69. S. Mekid High Precision Linear Slide. Part I. Design and Construction International Journal of Machine Tools & Manufacturing 40 7 2000 1039 1050 (Pubitemid 30566204)
70. S. Mekid, and O. Olejniczak High Precision Linear Slide. Part II. Control and Measurements International Journal of Machine Tools & Manufacturing 40 7 2000 1051 1064 (Pubitemid 30566203)
71. S.-H. Nam, and M.-Y. Yang A Study on a Generalized Parametric Interpolator with Real-time Jerk-limited Acceleration Computer-Aided Design 36 1 2004 27 36
72. R. Neugebauer, B. Denkena, and K. Wegener Mechatronic Systems for Machine Tools Annals of the CIRP 56 2 2007 657 686 (Pubitemid 350122472)
73. R. Neugebauer, W.-G. Drossel, S. Ihlenfeldt, and C. Harzbecker Design Method for Machine Tools with Bionic Inspired Kinematics CIRP Annals 59 1 2009 371 374
74. R. Neugebauer, V. Wittstock, A. Illgen, and G. Naumann Piezo-based Actuator-Sensor-Units for Uni-axial Vibration Reduction in Machine Tools Annals of the German Academic Society for Production Engineering, WGP XIII 2 2006 211 216
75. Novotny L, Strakos P, Vesely J, Dietmair A (2009) Potential of State-feedback Control for Machine Tool Drives, Modern Machinery Science Journal 2009(2):98-112, Paper No. 4, Prague.
76. M. Nordin, and P.-O. Gutman Controlling Mechanical Systems with Backlash - A Survey Automatica 38 10 2002 1633 1649 (Pubitemid 34946681)
77. C. Okwudire, and Y. Altintas Hybrid Modeling of Ball Screw Drives with Coupled Axial, Torsional and Lateral Dynamics Transactions of ASME, Journal of Machine Design 131 071002 2009 1 9 10.1115/1.3125887
78. C. Okwudire, and Y. Altintas Minimum Tracking Error Control of Flexible Ball Screw Drives using a Discrete-time Sliding Mode Controller Transactions of ASME, Journal of Dynamic Systems, Measurement and Control 131 5, 051006 2009 1 12 10.1115/1.3155005
79. T. Ostermann, and M. Weck Lineardirektantriebe mit Impulsentkopplung Antriebstechnik 42 11 2003 61 64 ISSN 0722-8546
80. C.H. Park, J.H. Chung, H. Lee, and S.T. Kim Motion Error Analysis of the Porous Air Bearing Stages Using the Transfer Function Journal of Korean Society of Precision Engineering 21 7 2004 185 194
81. C.H. Park, Y.J. Oh, E. Shamoto, and D.W. Lee Compensation for Five DOF Motion Errors of Hydrostatic Feed Table by Utilizing Actively Controlled Capillaries Precision Engineering 30 3 2006 299 305 (Pubitemid 44183604)
82. C. Pislaru, D.G. Ford, and G. Holroyd Hybrid Modelling and Simulation of a Computer Numerical Control Machine Tool Feed Drive Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 218 2 2004 111 120 (Pubitemid 40122487)
83. G. Pritschow A Comparison of Linear and Conventional Electromechanical Drives Annals of the CIRP 47 2 1998 541 547
84. G. Pritschow, Y. Altintas, F. Jovane, Y. Koren, M. Mitsuishi, S. Takata, H. Van Brussel, M. Weck, and K. Yamazaki Open Controller Architecture - Past, Present and Future Annals of CIRP 50 2 2001 446 463
85. G. Pritschow, C. Eppler, and W.-D. Lehner Ferraris Sensor - The Key for Advanced Dynamic Drives CIRP Annals 52 1 2003 289 292
86. G. Pritschow, and W. Philipp Direct Drives for High-Dynamic Machine Tool Axes Annals of the CIRP 39 1 1990 413 416
87. G. Pritschow, and W. Philipp Research on the Efficiency of Feedforward Controllers in Direct Drives Annals of the CIRP 41 1 1992 411 415 (Pubitemid 23568190)
88. G. Pritschow, and S. Röck Hardware in the Loop Simulation of Machine Tools CIRP Annals-Manufacturing Technology 53 1 2004 295 298
89. G. Pritschow On the influence of the Velocity Gain Factor on the Path Deviation Annals of the CIRP 45 1 1996 367 372
90. Pritschow G (2001) Antriebssystem sowie Verfahren zur Bestimmung der Bandbreite eines solchen Antriebssystems, German Patent and Trademark Office, Patent Specification DE 10135220.
91. R. Ramesh, M.A. Mannan, and A.N. Poo Error Compensation in Machine Tools - A Review. Part I. Geometric, Cutting-force Induced and Fixture-dependent Errors International Journal of Machine Tools and Manufacture 40 9 2000 1235 1256 (Pubitemid 30592198)
92. G. Reinhart, M.F. Zäh, and T. Baudisch Simulation Environment for Designing the Dynamic Motion Behaviour of the Mechatronic System Machine Tool Journal of Production Engineering-Research and Development, Jg XI 1 2004 145 148
93. D. Renton, and M.A. Elbestawi Motion Control for Linear Motor Feed Drives in Advanced Machine Tools International Journal of Machine Tools and Manufacture 41 2001 479 507 (Pubitemid 34771338)
94. S. Röck, and G. Pritschow Real-time Capable Finite Element Models with Closed-Loop Control - A Method for Hardware-in-the-Loop Simulation of flexible Systems WGP Annals-Production Engineering Research & Development XIV 1 2007 37 43
95. Sakano T (1986) Acceleration/Deceleration Control System, US Patent 4,603,286, Fanuc Ltd., Assignee.
96. E. Shamoto, C.H. Park, and T. Moriwaki Analysis and Improvement of Motion Accuracy of Hydrostatic Feed Table Annals of the CIRP 50 1 2001 285 288
97. E. Shamoto, N. Suzuki, and A. Hamaguchi A New Fluid Bearing Utilizing Traveling Waves Annals of the CIRP 55 1 2006 411 414 (Pubitemid 44578443)
98. H. Shinno, H. Yoshioka, and K. Taniguchi A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining Annals of the CIRP 56 1 2007 369 372 (Pubitemid 46898319)
99. H. Shinno, H. Hashizume, H. Yoshioka, K. Komatsu, T. Shinshi, and K. Sato X-Y-θ Nano-Positioning Table System for a Mother Machine Annals of the CIRP 53 1 2004 337 340
100. H. Shinno, H. Hashizume, and K. Sato Nanometer Positioning of a Linear Motor-driven Ultraprecision Aerostatic Table System with Electrorheological Fluid Dampers Annals of the CIRP 48 1 1999 289 292
101. Singer NC, Seering WP, Pasch K (1989) Shaping Command Input to Minimize Unwanted Dynamics, Europäische Patentschrift EP0433375B1, Europäisches Patentamt, Paris.
102. R. Sipahi, and N. Olgac Active Vibration Suppression With Time Delayed Feedback Journal of Vibration and Acoustics 125 3 2003 384 389
103. J.-J.E. Slotine, and W. Li Adaptive Manipulator Control: A Cast Study IEEE Transactions on Automatic Control 33 11 1988 995 1003
104. A. Slocum Precision Machine Design 1992 Prentice-Hall 401-412 (Chapter 7.7)
105. A. Slocum Linear Motion Carriage with Aerostatic Bearings Preloaded by Inclined Iron Core Linear Electric Motor Precision Engineering 27 1 2003 382 394
106. M. Slutka, L. Novotny, J. Sveda, P. Strakos, J. Hudec, J. Smolik, and P. Vlach Machine Tool Lightweight Design and Advanced Control Techniques MM Science Journal 2008 31 36 ISSN 1803-1269
107. D. Spath, J. Rosum, and A. Haberkern Kinematics, Frictional Characteristics and Wear Reduction by PVD Coating on Ball Screw Drives Annals of the CIRP 44 1 1995 349 352
108. W. Symens, H. Van Brussel, and J. Swevers Gain-scheduling Control of Machine Tools with Varying Structural Dynamics Annals of the CIRP 53 1 2004 321 324
109. Y. Takeuchi, Y. Sakaida, K. Sawada, and T. Sata Development of 5-axis Control Ultraprecision Milling Machine for Micromachining Based on Non-friction Servomechanism Annals of the CIRP 49 1 2000 295 298
110. Y.S. Tarng, J.Y. Kao, and Y.S. Lin Identification of and Compensation for Backlash on the Contouring Accuracy of CNC Machining Centers International Journal of Advanced Manufacturing Technology 13 5 1997 359 366
111. M. Tomizuka Zero Phase Error Tracking Algorithm for Digital Control ASME Journal of Dynamic Systems, Measurement, and Control 109 1987 65 68 (Pubitemid 17554850)
112. H.K. Tonshof, C. Lapp, and R. Kaak Control of Linear Direct Drives and New Demands on Machine Tool Structures Annals of the German Academic Society for Production Engineering V 2 1998 51 56
113. A.M. Trzynadlowski Control of Induction Motors 2001 Academic Press San Diego
114. M.-C. Tsai, M.-Y. Cheng, K.-F. Lin, and N.-C. Tsai On Acceleration/Deceleration Before Interpolation for CNC Motion Control Proceedings of the 2005 IEEE International Conference on Mechatronics Taipei, Taiwan, 10.07.-12.07.2005 2005 382 387 (Pubitemid 44424792)
115. T. Tsuji, T. Hashimoto, H. Kobayashi, M. Mizuochi, and K. Ohnishi A Wide-range Velocity Measurement Method for Motion Control IEEE Transactions on Industrial Electronics 56 2 2009 510 519
116. V.I. Utkin Variable Structure Systems with Sliding Modes IEEE Transactions on Automatic Control 22 2 1977 212 222
117. H. Van Brussel, C.-H. Chen, and J. Swevers Accurate Motion Controller Design Based on an Extended Pole Placement Method and a Disturbance Observer Annals of CIRP 43 1 1994 367 372
118. H. Van Brussel, P. Sas, N. Istvan, P. De Fonseca, and P. Van den Braembussche Towards a Mechatronic Compiler IEEE/ASME Transactions on Mechatronics 6 1 2001 90 105 (Pubitemid 32394250)
119. H. Van Brussel, and P. Van den Braembussche Robust Control of Feed Drives with Linear Motors Annals of the CIRP 47 1 1998 325 328
120. P. Van den Braembussche, J. Swevers, and H. Van Brussel Design and Experimental Validation of Robust Controllers for Machine Tool Drives with Linear Motor Mechatronics 11 2001 545 561
121. K.K. Varanasi, and S.A. Nayfeh The Dynamics of Lead-screw Drives: Low-order Modeling and Experiments Transactions of ASME, Journal of Dynamic Systems, Measurement and Control 126 2004 388 396 (Pubitemid 40122687)
122. A. Verl, and M. Bodson Torque Maximization for Permanent Magnet Synchronous Motors IEEE Transactions on Control Systems Technology 6 6 1998 740 745 (Pubitemid 128747903)
123. ISG-Virtuos - A Powerful Tool for Simulation and Visualization, ISG Industrielle Steuerungstechnik GmbH, Stuttgart, www.isg-stuttgart.de.
124. M. Weck, and G. Ye Sharp Corner Tracking Using the IKF Control Strategy Annals of the CIRP 39 1 1990 437 441
125. M. Weck, P. Krüger, and C. Brecher Limits for Controller Settings with Electric Linear Direct Drives International Journal of Machine Tools and Manufacture 41 1 2001 65 88
126. M. Weck, C. Brecher, A. Schulz, and R. Keiser Coupled Simulation of Control Loop and Structural Dynamics Annals of the German Academic Society for Production Engineering X 2 2003 105 110
127. Weck M, Brecher C (2005) Werkzeugmaschinen Band 2- Konstruktion und Berechnung, Springer-VDI, Berlin/Heidelberg/New York, 8. Auflage.
128. H. Weule, and U. Golz Dynamisches Verhalten von Kugelgewindetrieben wt Werkstattstechnik 78 1988 Springer 623-626
129. M. Weck, and U. Wahner Linear Magnetic Bearing and Levitation System for Machine Tools Annals of the CIRP 47 1 1998 311 314
130. R. Whalley, M. Ebrahimi, and A.A. Abdul-Ameer Machine Tool Axis Dynamics Proceedings of the IMechE, Part C: Journal of Mechanical Engineer Science 220 2006 403 419
131. M.F. Zaeh, T. Oertli, and J. Milberg Finite Element Modelling of Ball screw Feed Drive Systems CIRP Annals 53 1 2004 289 294
132. M.F. Zaeh, and G. Englberger Robust Speed Control of Feed Drive Systems with Ball Screw for Machine Tools Journal of Production Engineering-Research and Development XII 1 2005 209 212
133. Y. Zhang, and A. Alleyne A Simple Novel Approach to Active Vibration Isolation With Electrohydraulic Actuation Transactions of ASME, Journal of Dynamic Systems, Measurement, and Control 125 1 2003 125 128
134. M. Zatarain, I. Ruiz de Argandona, A. Illarramendi, J.L. Azpeitia, and R. Bueno New Control Techniques Based on State Space Observers for Improving the Precision and Dynamic Behaviour of Machine Tools Annals of the CIRP 54 1 2005 393 396 (Pubitemid 40948483)
135. W.-H. Zhu, and T. Lamarche Velocity Estimation by Using Position and Acceleration Sensors IEEE Transactions on Industrial Electronics 54 5 2007 2706 2715
136. Zirn O (2008) Machine Tool Analysis - Modelling, Simulation and Control of Machine Tool Manipulators, Habilitation Thesis, Department of Mechanical & Process Engineering, ETH Zürich (http://e-collection.ethbib.ethz.ch/ view/eth:41862).
137. O. Zirn, S. Weikert, and F. Rehsteiner Design and Optimization of Fast Axis Feed Drives Using Nonlinear Stability Analysis Annals of CIRP 45 1 1996 363 366 (Pubitemid 126601467)