Control of machine tools

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 119, Issue 4B, 1997, Pages 749-755

  Koren, Yoram ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADAPTIVE CONTROL SYSTEMS; FUZZY CONTROL; MOTION CONTROL; POSITION CONTROL; SERVOMECHANISMS; THREE TERM CONTROL SYSTEMS;

SERVOCONTROL LOOPS;

MACHINE TOOLS;

EID: 0031273742     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.2836820     Document Type: Article

References (67)

1. Armstrong, B., Control of Machines With Friction, Academic Press, 1991.
2. Bin, H. Z., Yamazaki, K., and DeVries, M. F., “A Microprocessor-Based Control Scheme for the Improvement of Contouring Accuracy,” Annals of the CIRP, Vol. 32/1/83, 1983, pp. 275-279.
3. Burhoe, J. C., and Nwokah, O. D., “Multivariable Control of a Biaxial Machine Tool,” Proc. of the Symposium on Dynamic Systems, Measurement, and Control, ASME Winter Annual Meeting, San Francisco, CA, Dec. 1989, pp. 1-6.
4. Canudas, C., Astrom, K. J., and Braun, K., “Adaptive Friction Compensation in DC Motor Drives,” Proc. IEEE Int. Conf on Robotics and Automation, San Frasisico, Apr. 1986, pp. 1556-1561.
5. Canudas, C., and Seront, V., “Robust Adaptive Friction Compensation,” Proc. Of the 1990 IEEE Int. Conf. on Robotics and Automation, 1990, pp. 1383-1388, Cincinnati, OH.
6. Chuang, H. Y., and Liu, C. H., “Cross-Coupled Adaptive Feedrate Control for Multiaxis Machine Tools,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 113, Sept. 1991, pp. 451-457.
7. Doraiswami, R., and Gulliver, A., “A Control Strategy for Computer Numerical Control Machine Exhibiting Precision and Rapidity,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 106, 1984, pp. 56-62.
8. Haack, B., and Tomizuka, M., “The Effect of Adding Zeros to Feedforward Controllers,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 113, Mar. 1991, pp. 6-10.
9. Jee, S., and Koren, Y., 1996, “Fuzzy Logic Controller for Friction Compensation in Feed Drives,” ASME Journal of Engineering for Industry.
10. Johnson, W. C., Shrinivasan, K., and Kulkarni, P., “Digital Control Algorithms for Electrical Machine Tool Feed Drives,” Proc. Of the 12th N. American Mfg. Research Conf. Hougton, MI, 1984, pp. 447-453.
11. Koren, Y., Shani, A., and Ben-Uri, J., “Numerical Control of a Lathe,” IEEE Trans. Ind. Gen. Appl, vol. 6, no. 2, pp. 175-179, Mar. 1970.
12. Koren, Y., “Design of Computer Control for Manufacturing Systems,” ASME Journal of Engineering for Industry, Vol. 101, No. 3, Aug. 1979, pp. 326-332.
13. Koren, Y., “Cross-Coupled Biaxial Computer Control for Manufacturing Systems,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 102, No. 4, Dec. 1980, pp. 265-272.
14. Koren, Y., 1983, Computer Control of Manufacturing Systems, McGraw- Hill, New York.
15. Koren, Y., and Lo, C. C., “Variable-Gain Cross-Coupling Controller for Contouring,” Annals of the CIRP, Vol. 43/1, Aug., 1991, pp. 371-374.
16. Koren, Y., and Lo, C. C., “Advanced Controllers for Feed Drives” Mmia/i of the CIRP, Vol. 44/2, Aug., 1992, pp. 689-698.
17. Kubo T., Anwar, G., and Tomizuka, M., “Application of Nonlinear Friction Compensation to Robot Arm,” Proc. Of the 1986 IEEE Int. Conf. on Robotics and Automation, 1986, pp. 722-727, San Francisco, CA.
18. Kulkarni, P. K., and Srinivasan, K., 1989, “Optimal Contouring Control of Multi-Axis Drive Servomechanisms,” Asme Journal of Engineering for Industry, Vol. 3, May, 1989, pp. 140-148.
19. Kulkarni, P. K., and Srinivasan, K., 1990, “Cross-Coupled Control of Biaxial Feed Drive Servomechanisms,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 112, No. 2, June, 1990, pp. 225-232.
20. Lee, C.-C., “Fuzzy Logic in Control Systems: Fuzzy Logic Controller— Part I and II,” IEEE Transactions on System, Man, and Cybernetics, Vol. 20, No. 2, 1990, pp. 404-435.
21. Liu, C. H., and Chan, W. M., “Microprocessor-Based Cross-Coupled Biaxial Controller for A Two-Axis Positioning System,” IEEE Transactions, Journal of Industrial Electronics and Control Instrumentation, 1985, pp. 327-332.
22. Makino, H., and Ohde, T., “Motion Control of the Direct Drive Actuator,” Annals of the CIRP, Vol. 40/1/1991, 1991, pp. 375-378.
23. Masory, O., “The Effect of a Velocity Feed Forward Loop on Contour Accuracy,” Proceedings of 7th International Motor Conference, Oct., 1985, pp. 418-428.
24. Masory, O., and Wang, J., “Improving Contouring System Accuracy by Two-stage Actuation,” 1991, NAMRC Proceedings.
25. Pak, A., “Adaptive Matching Controllers for Feed Drive Systems,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 113, June, pp. 316-320.
26. Poo, A., Bollinger, J. G., and Younkin, W., “Dynamic Errors in Type 1 Contouring Systems,” IEEE Transaction on Industrial Applications, Vol. IA-8, No. 4, 1972, pp. 477-484.
27. Pritschow, G., and Philipp, W., “Direct Drives for High-Dynamic Machine Tool Axes,” Annals of the CIRP, Vol. 39/1/1990, 1990, pp. 413-416.
28. Schepper, F., and Yamazaki, K., “Application of ASIC-Techonology to Mechatronics Control: Development of the Flexible Servo Peripheral Chip,” Annals of the CIRP, Vol. 37/1, 1988, pp. 389-392.
29. Schepper, F., and Yamazaki, K., “Development of an ASIC Performing High Speed Current Loop Processing of Servo Motor Control for Mechatronics Applications,” Annals of the CIRP, Vol. 38/1, 1989, pp. 355-358.
30. Tsao, T. C., and Tomizuka, M., “Adaptive Zero Phase Error Tracking Algorithm for Digital Control,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 109, Dec. 1987, pp. 349-354.
31. Tomizuka, M., “Zero Phase Error Tracking Algorithm for Digital Control,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 109, March, 1987, pp. 65-68.
32. Torfs, D., De Schutter, J., and Swevers, J., “Extended Bandwidth Zero Phase Error Tracking Control of Non-Minimal Phase Systems,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 114, Sept. 1992.
33. Walrath, C. D., “Adaptive Bearing Friction Compensation Based on Recent Knowledge of Dynamic Friction,” Automatica, Vol. 20, No. 6, 1984, pp. 717-727.
34. Week, M., and Ye, G., “Sharp Comer Tracking Using the IKF Control Strategy,” Annals of the CIRP, Vol. 39/1/1990, 1990, pp. 437-441.
35. Yamazaki, K., “Development of Flexible Actuator Controller for Advanced Machine Tool and Robot Control,” Annals of the CIRP, Vol. 36, 1987, pp. 285-288.
36. Chou, J., and Yang, D., “On the Generation of Coordinated Motion of Five-Axis CNC/CMM Machines,” Journal of Engineering for Industry, Vol. 114, 1992, pp. 15-22.
37. Hanada, T., Bandyopadhyay, B. P., and Hoshi, T., “Development of A CAD/CAM System for Rapid Prototyping,” ASME PED-Vol. 64, Mfg. Science and Eng., 1993, pp. 101-108.
38. Hwang, J., “Interference-Free Tool-Path Generation in the NC Machining of Parametric Compound Surfaces,” CAD Vol. 24, no. 12, Dec., 1992, pp. 667-677.
39. Jensen, C., and Anderson, D., “Accurate Tool Placement and Orientation for Finish Surface Machining,” ASME Winter Annals Meeting, 1992, pp. 127-145.
40. Kawabe, S., Kimura, F., and Sata, T., 1981, “Generation of NC Commands for Sculptureed Surface Machining form 3-Coordinate Measuring Data,” CIRP Ann., Vol. 30, 1981, pp. 369-372.
41. Koren, Y., Lo, C. C., and Shpitalni, M., 1993, “CNC Interpolators: Algorithm and Analysis,” PED-Vol. 64, ASME Winter Annual Meeting, 1993, pp. 83-92.
42. Koren, Y., 1975, “Interpolator for a CNC System,” IEEE Trans. Comp., Vol. C-25, No. 1, Jan. pp. 32-37.
43. Koren, Y., and Masory, O., “Reference-Pulses Circular Interpolators for CNC Systems,” ASME Journal of Engineering for Industry, Vol. 103, No. 1, Feb., 1981, pp. 131-136.
44. Kota, K., Oshima, M., and Maruyama, H., “The DDI-CNC for Machining Sculptured Surfaces,” IEEE Conference on IECON, 1984, pp. 551-555, New Jersey.
45. Lee, Y., and Chang, T., “CASCAM-An Automated System for Sculptured Surface Cavity Machining,” Computers in Industry, Vol. 16, 1991, pp. 321-342.
46. Lin, R. S., and Koren, Y., “Real-Time Five-Axis Interpolator for Machining Ruled Surfaces,” ASME Winter Annual Meeting, Nov., DSC-Vol. 55-2, 1994, pp. 951-960.
47. Lin, R. S., and Koren, Y., “Real-Time Interpolator for 5-Axis Surface Machining,” The 3rd International Conference on Automation Technology, Taipei, July, 1994, pp. 107-113.
48. Lin, R. S., and Koren, Y., 1996, “Efficient Tool-Path Planning,” ASME Journal of Engineering for Industry, New paper in ASME.
49. Masory, O., and Koren, Y., “Reference-Word Circular Interpolators for CNC Systems,” ASME Journal of Engineering for Industry, Vol. 104, Nov. 1982.
50. Shpitalni, M., Koren, Y., and Lo, C., “Real-Time Curve Interpolators,” Computer-Aided Design, Vol. 26, Nov. 1994, pp. 832-838.
51. Tseng, A., Kolluri, S., and Radhakrish-nan, P., “A CNC Machining System for Education,” J. Of Manufacturing System, Vol. 8, No. 3, 1990, pp. 207-214.
52. Vickers, G. W., and Quan, K. W., “Ball-Mills Versus End-Mills for Curved Surface Machining,” ASME Journal of Engineering for Industry, Vol. 3, Feb. 1989, pp. 22-26.
53. Amitay, G., Malkin, S., and Koren, Y., “Adaptive Control Optimization of Grinding,” ASME Journal of Engineering for Industry, 103 (1), 1981, pp. 102-111.
54. Centner, R., 1964, “Final Report on Development of Adaptive Control Techniques for a Numerically Controlled Milling Machine,” Technical Documentary Report ML-TDR-64-279.
55. Koren, Y., and Masory, O., “Adaptive Control With Process Estimation,” Annals of the CIRP, 30 (1), 1981, pp. 373-376.
56. Koren, Y., “Adaptive Control Systems for Machining,” Manufacturing Review, Vol. 2, No. 1, March, 1989, pp. 6-15.
57. Lauderbaugh, L. K., and Ulsoy, A. G., “Model Reference Adaptive Force Control in Milling,” Modeling, Sensing, and Control of Mfg. Systems, PED— Vol. 23, DSC—Vol. 4, ASME, 1986, pp. 165-180.
58. Lin, S. B., and Masory, O., “Gains Selection for a Variable Gain Adaptive Control System for Turning,” ASME Journal of Engineering for Industry, 109 (4), 1987, pp. 399-403.
59. Masory, O., and Koren, Y., “Adaptive Control System for Turning,” Annals of the CIRP, 1980, 29 (1).
60. Masory, O., and Koren, Y., “Variable-Gain Adaptive Control System for Machine Tools,” Journal of Manufacturing Systems, 2, (2) 1983, pp. 165-174.
61. Mathias, R. A., “Adaptive Control for the Eighties,” SME Technical Report M58G-242, 1980.
62. Peklenik, J., “Geometrick Adaptive Control of Manufacturing Systems,” Annals of the CIRP, 18 (1), 1970, pp. 265-272.
63. Tlusty, J., and Koren, Y., 1974. “Numerical and Adaptive Control for Die Sinking,” Proc. Of the 2nd International Conference of Production Engineering, Tokyo.
64. Ulsoy, A. G., Koren, Y., and Rasmussen, F., “Principal Developments in the Adaptive Control of Machine Tools,” ASME Journal of Dynamic Systems, Measurement, and Control. 105, 1983, pp. 107-112.
65. Watanabe, T., 1986, “A Model-Based Approach to Adaptive Control Optimization in Millings,” ASME Journal of Dynamic Systems, Meas., and Control, 108, 1986, pp. 56-64.
66. Wu, C. L., Haboush, R. K., Lymburner, D. R., and Smith, G. H., “Closed-Loop Machining Control for Cylindrical Turning,” Modeling, Sensing, and Control of Manufacturing Systems, PED Vol. 23, ASME, 1986, pp. 189-204.
67. Yen, D. W., and Wright, P. K., 1983, “Adaptive Control in Machining— A New Approach Based on the Physical Constraints of Tool Wear Mechanisms,” ASME Journal of Engineering for Industry, 105 (1), pp. 31-38.