Error compensation in machine tools - a review. Part I: Geometric, cutting-force induced and fixture-dependent errors

International Journal of Machine Tools and Manufacture

Volumn 40, Issue 9, 2000, Pages 1235-1256

  Ramesh, R ^a   Mannan, M A ^a   Poo, A N ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING; ERROR ANALYSIS; ERROR COMPENSATION; KINEMATICS; MATHEMATICAL TRANSFORMATIONS; MATRIX ALGEBRA; THERMAL EFFECTS;

GEOMETRIC ERRORS;

MACHINE TOOLS;

EID: 0033893438     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0890-6955(00)00009-2     Document Type: Article

References (43)

1. D.M.S. Blackshaw, Machine tool accuracy and repeatability - A new approach with the revision of IS0 230-2, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 91-100.
2. Bryan J. International status of thermal error research. Annals of the CIRP. 39(2):1990;645-656.
3. Chen L., Tsutsumi M. Measurement and compensation of corner-tracking errors of CNC machine tools. International Journal of Japan Society of Precision Engineering. 30(4):1996;331-336.
4. DeMeter E.C., Hockenberger M.J. The application of tool path compensation for the reduction of clamping-induced geometric errors. International Journal of Production Research. 35(12):1997;3415-3432.
5. M.A. Donmez, A general methodology for machine tool accuracy enhancement: theory, application and implementation, PhD dissertation, Purdue University, 1985.
6. Evans C.J., Kocken R.J. Self-calibration: reversal, redundancy, error separation and absolute testing. Annals of the CIRP. 45(2):1996;617-632.
7. K.C. Fan, M. Burdekin, Development of a computer software package for positioning accuracy calibration and analysis on NC machine tools, Proc. 26th Int. MTDR Conf, 17, Manchester, UK 1986, pp. 107-113.
8. P.M. Ferreira, Adaptive accuracy improvement of machine tools, PhD dissertation, Purdue University, 1987.
9. J.M. Freeman, D.G. Ford, The analysis of geometric and thermal errors of non-Cartesian structures, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 371-379.
10. Furukawa Y., Moronuki N. Contact deformation of a machine tool slideway and its effect on machining accuracy. JSME International Journal. 30(263):1987;868-874.
11. M. Gull, Contouring accuracy assessment of CNC machine tools - a user's view, Proc. 3rd Int, Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 401-412.
12. M.J. Hockenberger, Implementing meta-functions into a quasi-static model to analyse workpiece displacement within a machining fixture, PhD dissertation, The Pennsylvania State University, 1995.
13. Hockenberger M.J., DeMeter E.C. The application of meta-functions to the quasi-static analysis of workpiece displacement within a machining fixture. Journal of Manufacturing Science and Engineering. 118:1996;325-331.
14. J. Holsa, Utilising CMM measurements in the evaluation of machine tool accuracy, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 487-496.
15. Huang P.S., Ni J. On-line error compensation of coordinate measuring machines. International Journal of Machine Tools and Manufacture. 35(5):1995;725-738.
16. J. Jedrzejewski, W. Modrzycki, Intelligent supervision of thermal deformations in high precision machine tools, Proc. 32nd Int. MATADOR Conf, Manchester, UK, 1997, pp. 457-462.
17. W. Knapp, Interim checks for machine tools, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMP, 1997 pp. 161-168.
18. R. Krug, Automated calibration of coordinate measuring machines, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 413-420.
19. Lee E.S., Suh S.H., Shon J.W. A comprehensive method for calibration of volumetric positioning accuracy on CNC machines. The International Journal of Advanced Manufacturing Technology. 14:1998;43-49.
20. C.H. Lo, Real-time error compensation on machine tools through optimal thermal error modelling, PhD dissertation, University of Michigan, 1994.
21. A.P. Longstaff, M. Mavromihales, D.G. Ford, Calibration and correction methods of spatial errors found in Cartesian manipulators, Proc. 3rd Inc. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 431-441.
22. D.R. McMurtry, Development of the next generation of 3D probing systems for the future Coordinate Measuring Machines and Machine Tools, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 169-185.
23. T.J. Morris, The REAL accuracy of machine tools, Proc. 3rd Int. Conf. on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 113-122.
24. Ni J. CNC machine accuracy enhancement through real-time error compensation. ASME Trans Journal of Manufacturing Science and Engineering. 119:1997;717-724.
25. J. Ni, Study on online identification and forecasting compensatory control of volumetric errors for multiple axis machine tools, PhD dissertation, University of Wisconsin-Madison, 1987.
26. Ni J., Wu S.M. An on-line measurement technique for machine volumetric error compensation. ASME Trans. Journal of Engineering for Industry. 115:1993;85-92.
27. Oya M., Hokari H., Tanura H. A study on improvement of the accuracy of a three-coordinate measuring machine (A method of error compensation). JSME International Journal. 30(260):1987;344-349.
28. Philpott M.L., Green P.A. An error compensation strategy for replication by rapid prototyping. ASME Trans. Journal of Engineering for Industry. 117:1995;423-429.
29. S.R. Postlethwaite, D.G. Ford, Geometric error analysis software for CNC machine tools, Proc. 3rd Int. Conf. on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 305-316.
30. Sartori S., Zhang G.X. Geometric error measurement and compensation of machines. Annals of the CIRP. 44(2):1995;599-609.
31. S. Shafie, V. Chiles, D. Jenkinson, D.M.S. Blackshaw, Static and dynamic measurements of machine tools, Proc. 3rd Int. Conf. on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 215-227.
32. J. Sladek, Strategy of applying coordinate metrology in quality assurance systems with regard to a measurement accuracy, Proc. 3rd Int. Conf. on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 497-507.
33. Slocum A.H. Precision Machine Design. 1992;Prentice Hall.
34. J.A. Soons, Error analysis of a hexapod machine tool, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 347-358.
35. A. Statham, A. Martin, D.M.S. Blackshaw, Assessing the thermal distortion caused by spindle rotation of a machining centre using the draft standard ISO/DIS 230-3, Proc. 3rd Int. Conf on Laser Metrology and Machine Performance - LAMDAMAP, 1997, pp. 101-111.
36. Tarng Y.S., Chuang H.Y., Hsu W.T. An optimisation approach to the contour error control of CNC machine tools using genetic algorithms. The International Journal of Advanced Manufacturing Technology. 13:1997;359-366.
37. Tarng Y.S., Kao J.Y., Lim Y.S. Identification of and compensation for backlash on the contouring accuracy of CNC machining centres. The International Journal of Advanced Manufacturing Technology. 13:1997;77-85.
38. R. Venugopal, Thermal effects on the accuracy of numerically controlled machine tools, PhD dissertation, Purdue University, 1985.
39. Wilhelm R.G., Srinivasan N., Farabaugh F. Part-form errors predicted from machine tool performance measurements. Annals of the CIRP. 46(1):1997;471-475.
40. Wu S.M., Ni J. Precision machining without precise machinery. Annals of the CIRP. 38(1):1989;533-536.
41. Yang S., Yuan J., Ni J. Real-time cutting force induced error compensation on a turning centre. International Journal of Machine Tools and Manufacture. 37(11):1997;1597-1610.
42. Yang S., Yuan J., Ni J. The improvement of thermal error modelling and compensation on machine tools by CMAC neural network. International Journal of Machine Tools and Manufacture. 36(4):1996;527-537.
43. Yuan J., Ni J. The real-time error compensation technique for CNC machining systems. Mechatronics. 8:1998;359-380.