Robotics: Modelling, planning and control

Advanced Textbooks in Control and Signal Processing

Volumn , Issue 9781846286414, 2009, Pages 1-623

  Siciliano, Bruno ^a   Sciavicco, Lorenzo ^b   Villani, Luigi ^a   Oriolo, Giuseppe ^c  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

^b ROMA TRE UNIVERSITY   (Italy)

^c SAPIENZA UNIVERSITY OF ROME   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROL ENGINEERING; ELECTRICAL ENGINEERING; SIGNAL PROCESSING;

PLANNING AND CONTROL;

ROBOT PROGRAMMING;

EID: 84969566030     PISSN: 14392232     EISSN: 25103814     Source Type: Book Series    
DOI: None     Document Type: Chapter

References (250)

1. C. Abdallah, D. Dawson, P. Dorato, M. Jamshidi, “Survey of robust control for rigid robots,” IEEE Control Systems Magazine, vol. 11, no. 2, pp. 24–30, 1991.
2. M. Aicardi, G. Casalino, A. Bicchi, A. Balestrino, “Closed loop steering of unicycle-like vehicles via Lyapunov techniques,” IEEE Robotics and Automation Magazine, vol. 2, no. 1, pp. 27–35, 1995.
3. J.S. Albus, H.G. McCain, R. Lumia, NASA/NBS Standard Reference Model for Telerobot Control System Architecture (NASREM), NBS tech. note 1235, Gaithersburg, MD, 1987.
4. C.H. An, C.G. Atkeson, J.M. Hollerbach, Model-Based Control of a Robot Manipulator, MIT Press, Cambridge, MA, 1988.
5. R.J. Anderson, M.W. Spong, “Hybrid impedance control of robotic manipulators,” IEEE Journal of Robotics and Automation, vol. 4, pp. 549–556, 1988.
6. J. Angeles, Spatial Kinematic Chains: Analysis, Synthesis, Optimization, Springer-Verlag, Berlin, 1982.
7. S. Arimoto, F. Miyazaki, “Stability and robustness of PID feedback control for robot manipulators of sensory capability,” in Robotics Research: The First International Symposium, M. Brady, R. Paul (Eds.), MIT Press, Cambridge, MA, pp. 783–799, 1984.
8. R.C. Arkin, Behavior-Based Robotics, MIT Press, Cambridge, MA, 1998.
9. B. Armstrong-Hélouvry, Control of Machines with Friction, Kluwer, Boston, MA, 1991.
10. H. Asada, J.-J.E. Slotine, Robot Analysis and Control, Wiley, New York, 1986.
11. H. Asada, K. Youcef-Toumi, “Analysis and design of a direct-drive arm with a five-bar-link parallel drive mechanism,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 106, pp. 225–230, 1984.
12. H. Asada, K. Youcef-Toumi, Direct-Drive Robots, MIT Press, Cambridge, MA, 1987.
13. C.G. Atkeson, C.H. An, J.M. Hollerbach, ”Estimation of inertial parameters of manipulator loads and links,” International Journal of Robotics Research, vol. 5, no. 3, pp. 101–119, 1986.
14. J. Baillieul, “Kinematic programming alternatives for redundant manipulators,” Proc. 1985 IEEE International Conference on Robotics and Automation, St. Louis, MO, pp. 722–728, 1985.
15. A. Balestrino, G. De Maria, L. Sciavicco, “An adaptive model following control for robotic manipulators,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 105, pp. 143–151, 1983.
16. A. Balestrino, G. De Maria, L. Sciavicco, B. Siciliano, “An algorithmic approach to coordinate transformation for robotic manipulators,” Advanced Robotics, vol. 2, pp. 327–344, 1988.
17. J. Barraquand, J.-C. Latombe, “Robot motion planning: A distributed representation approach,” International Journal of Robotics Research, vol. 10, pp. 628–649, 1991.
18. G. Bastin, G. Campion, B. D’Andréa-Novel, “Structural properties and classification of kinematic and dynamic models of wheeled mobile robots,” IEEE Transactions on Robotics and Automation, vol. 12, pp. 47–62, 1996.
19. A.K. Bejczy, Robot Arm Dynamics and Control, memo. TM 33-669, Jet Propulsion Laboratory, California Institute of Technology, 1974.
20. W.M. Boothby, An Introduction to Differentiable Manifolds and Riemannian Geometry, Academic Press, Orlando, FL, 1986.
21. J. Borenstein, H.R. Everett, L. Feng, Navigating Mobile Robots: Systems and Techniques, A K Peters, Wellesley, MA, 1996.
22. B.K.K. Bose, Modern Power Electronics and AC Drives, Prentice-Hall, Englewood Cliffs, NJ, 2001.
23. O. Bottema, B. Roth, Theoretical Kinematics, North Holland, Amsterdam, 1979.
24. T.L. Boullion, P.L. Odell, Generalized Inverse Matrices, Wiley, New York, 1971.
25. M. Brady, “Artificial intelligence and robotics,” Artificial Intelligence, vol. 26, pp. 79–121, 1985.
26. M. Brady, J.M. Hollerbach, T.L. Johnson, T. Lozano-Pérez, M.T. Mason, (Eds.), Robot Motion: Planning and Control, MIT Press, Cambridge, MA, 1982.
27. H. Bruyninckx, J. De Schutter, “Specification of force-controlled actions in the “task frame formalism” — A synthesis,” IEEE Transactions on Robotics and Automation, vol. 12, pp. 581–589, 1996.
28. H. Bruyninckx, S. Dumey, S. Dutré, J. De Schutter, “Kinematic models for model-based compliant motion in the presence of uncertainty,” International Journal of Robotics Research, vol. 14, pp. 465–482, 1995.
29. F. Caccavale, P. Chiacchio, “Identification of dynamic parameters and feedforward control for a conventional industrial manipulator,” Control Engineering Practice, vol. 2, pp. 1039–1050, 1994.
30. F. Caccavale, C. Natale, B. Siciliano, L. Villani, “Resolved-acceleration control of robot manipulators: A critical review with experiments,” Robotica, vol. 16, pp. 565–573, 1998.
31. F. Caccavale, C. Natale, B. Siciliano, L. Villani, “Six-DOF impedance control based on angle/axis representations,” IEEE Transactions on Robotics and Automation, vol. 15, pp. 289–300, 1999.
32. F. Caccavale, C. Natale, B. Siciliano, L. Villani, ”Robot impedance control with nondiagonal stiffness,” IEEE Transactions on Automatic Control, vol. 44, pp. 1943–1946, 1999.
33. J.F. Canny, The Complexity of Robot Motion Planning, MIT Press, Cambridge, MA, 1988.
34. C. Canudas de Wit, H. Khennouf, C. Samson, O.J. Sørdalen, “Nonlinear control design for mobile robots,” in Recent Trends in Mobile Robots, Y.F. Zheng, (Ed.), pp. 121–156, World Scientific Publisher, Singapore, 1993.
35. F. Chaumette, “Image moments: A general and useful set of features for visual servoing,” IEEE Transactions on Robotics and Automation, vol. 21, pp. 1116-1127, 2005.
36. F. Chaumette, S. Hutchinson, “Visual servo control. Part I: Basic approaches,” IEEE Robotics and Automation Magazine, vol. 13, no. 4, pp. 82–90, 2006.
37. P. Chiacchio, S. Chiaverini, L. Sciavicco, B. Siciliano, “Closed-loop inverse kinematics schemes for constrained redundant manipulators with task space augmentation and task priority strategy,” International Journal of Robotics Research, vol. 10, pp. 410–425, 1991.
38. P. Chiacchio, S. Chiaverini, L. Sciavicco, B. Siciliano, “Influence of gravity on the manipulability ellipsoid for robot arms,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 114, pp. 723–727, 1992.
39. P. Chiacchio, F. Pierrot, L. Sciavicco, B. Siciliano, “Robust design of independent joint controllers with experimentation on a high-speed parallel robot,” IEEE Transactions on Industrial Electronics, vol. 40, pp. 393–403, 1993.
40. S. Chiaverini, L. Sciavicco, “The parallel approach to force/position control of robotic manipulators,” IEEE Transactions on Robotics and Automation, vol. 4, pp. 361–373, 1993.
41. S. Chiaverini, B. Siciliano, “The unit quaternion: A useful tool for inverse kinematics of robot manipulators,” Systems Analysis Modelling Simulation, vol. 35, pp. 45–60, 1999.
42. S. Chiaverini, B. Siciliano, O. Egeland, “Review of the damped least-squares inverse kinematics with experiments on an industrial robot manipulator,” IEEE Transactions on Control Systems Technology, vol. 2, pp. 123–134, 1994.
43. S. Chiaverini, B. Siciliano, L. Villani, “Force/position regulation of compliant robot manipulators,” IEEE Transactions on Automatic Control, vol. 39, pp. 647–652, 1994.
44. S.L. Chiu, “Task compatibility of manipulator postures,” International Journal of Robotics Research, vol. 7, no. 5, pp. 13–21, 1988.
45. H. Choset, K.M. Lynch, S. Hutchinson, G. Kantor, W. Burgard, L.E. Kavraki, S. Thrun, Principles of Robot Motion: Theory, Algorithms, and Implementations, MIT Press, Cambridge, MA, 2005.
46. J.C.K. Chou, “Quaternion kinematic and dynamic differential equations. IEEE Transactions on Robotics and Automation, vol. 8, pp. 53–64, 1992.
47. A.I. Comport, E. Marchand, M. Pressigout, F. Chaumette, “Real-time markerless tracking for augmented reality: The virtual visual servoing framework,” IEEE Transactions on Visualization and Computer Graphics, vol. 12, pp. 615– 628, 2006.
48. P.I. Corke, Visual Control of Robots: High-Performance Visual Servoing, Research Studies Press, Taunton, UK, 1996.
49. P. Corke, S. Hutchinson, “A new partitioned approach to image-based visual servo control,” IEEE Transactions on Robotics and Automation, vol. 17, pp. 507-515, 2001.
50. M. Corless, G. Leitmann, “Continuous state feedback guaranteeing uniform ultimate boundedness for uncertain dynamic systems,” IEEE Transactions on Automatic Control, vol. 26, pp. 1139–1144, 1981.
51. T.H. Cormen, C.E. Leiserson, R.L. Rivest, C. Stein, Introduction to Algorithms, 2nd ed., MIT Press, Cambridge, MA, 2001.
52. J.J. Craig, Adaptive Control of Mechanical Manipulators, Addison-Wesley, Reading, MA, 1988.
53. J.J. Craig, Introduction to Robotics: Mechanics and Control, 3rd ed., Pearson Prentice Hall, Upper Saddle River, NJ, 2004.
54. C. De Boor, A Practical Guide to Splines, Springer-Verlag, New York, 1978.
55. T.L. De Fazio, D.S. Seltzer, D.E. Whitney, “The instrumented Remote Center of Compliance,” Industrial Robot, vol. 11, pp. 238–242, 1984.
56. A. De Luca, A Spline Generator for Robot Arms, tech. rep. RAL 68, Rensselaer Polytechnic Institute, Department of Electrical, Computer, and Systems Engineering, 1986.
57. A. De Luca, C. Manes, “Modeling robots in contact with a dynamic environment,” IEEE Transactions on Robotics and Automation, vol. 10, pp. 542–548, 1994.
58. A. De Luca, G. Oriolo, C. Samson, “Feedback control of a nonholonomic carlike robot,” in Robot Motion Planning and Control, J.-P. Laumond, (Ed.), Springer-Verlag, Berlin, Germany, 1998.
59. A. De Luca, G. Oriolo, B. Siciliano, “Robot redundancy resolution at the acceleration level,” Laboratory Robotics and Automation, vol. 4, pp. 97–106, 1992.
60. J. Denavit, R.S. Hartenberg, “A kinematic notation for lower-pair mechanisms based on matrices,” ASME Journal of Applied Mechanics, vol. 22, pp. 215–221, 1955.
61. P.M. DeRusso, R.J. Roy, C.M. Close, A.A. Desrochers, State Variables for Engineers, 2nd ed., Wiley, New York, 1998.
62. J. De Schutter, H. Bruyninckx, S. Dutré, J. De Geeter, J. Katupitiya, S. Demey, T. Lefebvre, “Estimating first-order geometric parameters and monitoring contact transitions during force-controlled compliant motions,” International Journal of Robotics Research, vol. 18, pp. 1161–1184, 1999.
63. J. De Schutter, H. Bruyninckx, W.-H. Zhu, M.W. Spong, ”Force control: A bird’s eye view,” in Control Problems in Robotics and Automation, B. Siciliano, K.P. Valavanis, (Ed.), pp. 1–17, Springer-Verlag, London, UK, 1998.
64. J. De Schutter, H. Van Brussel, “Compliant robot motion I. A formalism for specifying compliant motion tasks,” International Journal of Robotics Research, vol. 7, no. 4, pp. 3–17, 1988.
65. J. De Schutter, H. Van Brussel, “Compliant robot motion II. A control approach based on external control loops,” International Journal of Robotics Research, vol. 7, no. 4, pp. 18–33, 1988.
66. K.L. Doty, C. Melchiorri, C. Bonivento, “A theory of generalized inverses applied to robotics,” International Journal of Robotics Research, vol. 12, pp. 1–19, 1993.
67. S. Dubowsky, D.T. DesForges, “The application of model referenced adaptive control to robotic manipulators,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 101, pp. 193–200, 1979.
68. C. Edwards, L. Galloway, “A single-point calibration technique for a six-degree–of–freedom articulated arm,” International Journal of Robotics Research, vol. 13, pp. 189–199, 1994.
69. O. Egeland, “Task-space tracking with redundant manipulators,” IEEE Journal of Robotics and Automation, vol. 3, pp. 471–475, 1987.
70. S.D. Eppinger, W.P. Seering, “Introduction to dynamic models for robot force control,” IEEE Control Systems Magazine, vol. 7, no. 2, pp. 48–52, 1987.
71. B. Espiau, F. Chaumette, P. Rives, “A new approach to visual servoing in robotics,” IEEE Transactions on Robotics and Automation, vol. 8, pp. 313– 326, 1992.
72. H.R. Everett, Sensors for Mobile Robots: Theory and Application, AK Peters, Wellesley, MA, 1995.
73. G.E. Farin, Curves and Surfaces for CAGD: A Practical Guide, 5th ed., Morgan Kaufmann Publishers, San Francisco, CA, 2001.
74. E.D. Fasse, P.C. Breedveld, “Modelling of elastically coupled bodies: Parts I– II”, ASME Journal of Dynamic Systems, Measurement, and Control, vol. 120, pp. 496–506, 1998.
75. O. Faugeras, Three-Dimensional Computer Vision: A Geometric Viewpoint, MIT Press, Boston, MA, 1993.
76. R. Featherstone, “Position and velocity transformations between robot endeffector coordinates and joint angles,” International Journal of Robotics Research, vol. 2, no. 2, pp. 35–45, 1983.
77. R. Featherstone, Robot Dynamics Algorithms, Kluwer, Boston, MA, 1987.
78. R. Featherstone, O. Khatib, “Load independence of the dynamically consistent inverse of the Jacobian matrix,” International Journal of Robotics Research, vol. 16, pp. 168–170, 1997.
79. J. Feddema, O. Mitchell, “Vision-guided servoing with feature-based trajectory generation,” IEEE Transactions on Robotics and Automation, vol. 5, pp. 691– 700, 1989.
80. M. Fliess, J. Lévine, P. Martin, P. Rouchon, “Flatness and defect of nonlinear systems: Introductory theory and examples,” International Journal of Control, vol. 61, pp. 1327–1361, 1995.
81. J. Fraden, Handbook of Modern Sensors: Physics, Designs, and Applications, Springer, New York, 2004.
82. G.F. Franklin, J.D. Powell, A. Emami-Naeini, Feedback Control of Dynamic Systems, 5th ed., Prentice-Hall, Lebanon, IN, 2005.
83. E. Freund, “Fast nonlinear control with arbitrary pole-placement for industrial robots and manipulators,” International Journal of Robotics Research, vol.1, no. 1, pp. 65–78, 1982.
84. L.-C. Fu, T.-L. Liao, “Globally stable robust tracking of nonlinear systems using variable structure control with an application to a robotic manipulator,” IEEE Transactions on Automatic Control, vol. 35, pp. 1345–1350, 1990.
85. M. Gautier, W. Khalil, “Direct calculation of minimum set of inertial parameters of serial robots,” IEEE Transactions on Robotics and Automation, vol. 6, pp. 368–373, 1990.
86. A.A. Goldenberg, B. Benhabib, R.G. Fenton, “A complete generalized solution to the inverse kinematics of robots,” IEEE Journal of Robotics and Automation, vol. 1, pp. 14–20, 1985.
87. H. Goldstein, C.P. Poole, J.L. Safko, Classical Mechanics, 3rd ed., Addison Wesley, Reading, MA, 2002.
88. G.H. Golub, C.F. Van Loan, Matrix Computations, 3rd ed., The Johns Hopkins University Press, Baltimore, MD, 1996.
89. M.C. Good, L.M. Sweet, K.L. Strobel, “Dynamic models for control system design of integrated robot and drive systems,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 107, pp. 53–59, 1985.
90. D.M. Gorinevski, A.M. Formalsky, A.Yu. Schneider, Force Control of Robotics Systems, CRC Press, Boca Raton, FL, 1997.
91. W.A. Gruver, B.I. Soroka, J.J. Craig, T.L. Turner, “Industrial robot programming languages: A comparative evaluation,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 14, pp. 565–570, 1984.
92. G. Hager, W. Chang, A. Morse, “Robot feedback control based on stereo vision: Towards calibration-free hand-eye coordination,” IEEE Control Systems Magazine, vol. 15, no. 1, pp. 30–39, 1995.
93. R.M. Haralick, L.G. Shapiro, Computer and Robot Vision, vols. 1 & 2, Addison Wesley, Reading, MA, 1993.
94. S. Helgason, Differential Geometry and Symmetric Spaces, Academic Press, New York, NY, 1962.
95. N. Hogan, “Impedance control: An approach to manipulation: Part I — Theory,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 107, pp. 1–7, 1985.
96. J.M. Hollerbach, “A recursive Lagrangian formulation of manipulator dynamics and a comparative study of dynamics formulation complexity,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 10, pp. 730–736, 1980.
97. J.M. Hollerbach, “Dynamic scaling of manipulator trajectories,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 106, pp. 102–106, 1984.
98. J.M. Hollerbach, “A survey of kinematic calibration,” in The Robotics Review 1, O. Khatib, J.J. Craig, and T. Lozano-Pérez (Eds.), MIT Press, Cambridge, MA, pp. 207–242, 1989.
99. J.M. Hollerbach, G. Sahar, “Wrist-partitioned inverse kinematic accelerations and manipulator dynamics,” International Journal of Robotics Research, vol. 2, no. 4, pp. 61–76, 1983.
100. R. Horowitz, M. Tomizuka, “An adaptive control scheme for mechanical manipulators — Compensation of nonlinearity and decoupling control,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 108, pp. 127– 135, 1986.
101. T.C.S. Hsia, T.A. Lasky, Z. Guo, “Robust independent joint controller design for industrial robot manipulators,” IEEE Transactions on Industrial Electronics, vol. 38, pp. 21–25, 1991.
102. P. Hsu, J. Hauser, S. Sastry, “Dynamic control of redundant manipulators,” Journal of Robotic Systems, vol. 6, pp. 133–148, 1989.
103. S. Hutchinson, G. Hager, P. Corke, “A tutorial on visual servo control,” IEEE Transactions on Robotics and Automation, vol. 12, pp. 651–670, 1996.
104. A. Isidori, Nonlinear Control Systems, 3rd ed., Springer-Verlag, London, UK, 1995.
105. H. Kazerooni, P.K. Houpt, T.B. Sheridan, “Robust compliant motion of manipulators, Part I: The fundamental concepts of compliant motion,” IEEE Journal of Robotics and Automation, vol. 2, pp. 83–92, 1986.
106. J.L. Jones, A.M. Flynn, Mobile Robots: Inspiration to Implementation, AK Peters, Wellesley, MA, 1993.
107. L.E. Kavraki, P. Svestka, J.-C. Latombe, M.H. Overmars, “Probabilistic roadmaps for path planning in high-dimensional configuration spaces,” IEEE Transactions on Robotics and Automation, vol. 12, pp. 566–580, 1996.
108. R. Kelly, R. Carelli, O. Nasisi, B. Kuchen, F. Reyes, “Stable visual servoing of camera-in-hand robotic systems,” IEEE/ASME Transactions on Mechatronics, vol. 5, pp. 39–48, 2000.
109. H.K. Khalil, Nonlinear Systems, Prentice-Hall, Englewood Cliffs, NJ, 2002.
110. W. Khalil, F. Bennis, “Symbolic calculation of the base inertial parameters of closed-loop robots,” International Journal of Robotics Research, vol. 14, pp. 112–128, 1995.
111. W. Khalil, E. Dombre, Modeling, Identification and Control of Robots, Hermes Penton Ltd, London, 2002.
112. W. Khalil, J.F. Kleinfinger, “Minimum operations and minimum parameters of the dynamic model of tree structure robots,” IEEE Journal of Robotics and Automation, vol. 3, pp. 517–526, 1987.
113. O. Khatib, “Real-time obstacle avoidance for manipulators and mobile robots,” International Journal of Robotics Research, vol. 5, no. 1, pp. 90–98, 1986.
114. O. Khatib, “A unified approach to motion and force control of robot manipulators: The operational space formulation,” IEEE Journal of Robotics and Automation, vol. 3, pp. 43–53, 1987.
115. P.K. Khosla, “Categorization of parameters in the dynamic robot model,” IEEE Transactions on Robotics and Automation, vol. 5, pp. 261–268, 1989.
116. P.K. Khosla, T. Kanade, “Parameter identification of robot dynamics,” in Proceedings of 24th IEEE Conference on Decision and Control, Fort Lauderdale, FL, pp. 1754–1760, 1985.
117. P.K. Khosla, T. Kanade, “Experimental evaluation of nonlinear feedback and feedforward control schemes for manipulators,” International Journal of Robotics Research, vol. 7, no. 1, pp. 18–28, 1988.
118. C.A. Klein, C.H. Huang, “Review of pseudoinverse control for use with kinematically redundant manipulators,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 13, pp. 245–250, 1983.
119. D.E. Koditschek, “Natural motion for robot arms,” Proc. 23th IEEE Conference on Decision and Control, Las Vegas, NV, pp. 733–735, 1984.
120. A.J. Koivo, Fundamentals for Control of Robotic Manipulators, Wiley, New York, 1989.
121. K. Kreutz, “On manipulator control by exact linearization,” IEEE Transactions on Automatic Control, vol. 34, pp. 763–767, 1989.
122. J.-C. Latombe, Robot Motion Planning, Kluwer, Boston, MA, 1991.
123. J.-P. Laumond, (Ed.), Robot Motion Planning and Control, Springer-Verlag, Berlin, 1998.
124. S.M. LaValle, Planning Algorithms, Cambridge University Press, New York, 2006.
125. S.M. LaValle, J.J. Kuffner, “Rapidly-exploring random trees: Progress and prospects,” in New Directions in Algorithmic and Computational Robotics, B.R. Donald, K. Lynch, D. Rus, (Eds.), AK Peters, Wellesley, MA, pp. 293– 308, 2001.
126. M.B. Leahy, G.N. Saridis, “Compensation of industrial manipulator dynamics,” International Journal of Robotics Research, vol. 8, no. 4, pp. 73–84, 1989.
127. C.S.G. Lee, “Robot kinematics, dynamics and control,” IEEE Computer, vol. 15, no. 12, pp. 62–80, 1982.
128. W. Leonhard, Control of Electrical Drives, Springer-Verlag, New York, 2001.
129. A. Liégeois, “Automatic supervisory control of the configuration and behavior of multibody mechanisms,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 7, pp. 868–871, 1977.
130. K.Y. Lim, M. Eslami, “Robust adaptive controller designs for robot manipulator systems,” IEEE Journal of Robotics and Automation, vol. 3, pp. 54–66, 1987.
131. C.S. Lin, P.R. Chang, J.Y.S. Luh, “Formulation and optimization of cubic polynomial joint trajectories for industrial robots,” IEEE Transactions on Automatic Control, vol. 28, pp. 1066–1073, 1983.
132. S.K. Lin, “Singularity of a nonlinear feedback control scheme for robots,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 19, pp. 134–139, 1989.
133. H. Lipkin, J. Duffy, “Hybrid twist and wrench control for a robotic manipulator,” ASME Journal of Mechanism, Transmissions, and Automation Design, vol. 110, pp. 138–144, 1988.
134. V. Lippiello, B. Siciliano, L. Villani, “Position-based visual servoing in industrial multirobot cells using a hybrid camera configuration,” IEEE Transactions on Robotics, vol. 23, pp. 73–86, 2007.
135. D.A. Lizárraga, “Obstructions to the existence of universal stabilizers for smooth control systems,” Mathematics of Control, Signals, and Systems, vol. 16, pp. 255–277, 2004.
136. J. Lončarić, “Normal forms of stiffness and compliance matrices,” IEEE Journal of Robotics and Automation, vol. 3, pp. 567–572, 1987.
137. T. Lozano-Pérez, “Automatic planning of manipulator transfer movements,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 11, pp. 681–698, 1981.
138. T. Lozano-Pérez, “Spatial planning: A configuration space approach,” IEEE Transactions on Computing, vol. 32, pp. 108–120, 1983.
139. T. Lozano-Pérez, “Robot programming,” Proceedings IEEE, vol. 71, pp. 821– 841, 1983.
140. T. Lozano-Pérez, M.T. Mason, R.H. Taylor, “Automatic synthesis of finemotion strategies for robots,” International Journal of Robotics Research, vol. 3, no. 1, pp. 3–24, 1984.
141. J.Y.S. Luh, “Conventional controller design for industrial robots: A tutorial,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 13, pp. 298–316, 1983.
142. J.Y.S. Luh, M.W. Walker, R.P.C. Paul, “On-line computational scheme for mechanical manipulators,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 102, pp. 69–76, 1980.
143. J.Y.S. Luh, M.W. Walker, R.P.C. Paul, “Resolved-acceleration control of mechanical manipulators,” IEEE Transactions on Automatic Control, vol. 25, pp. 468–474, 1980.
144. J.Y.S. Luh, Y.-F. Zheng, “Computation of input generalized forces for robots with closed kinematic chain mechanisms,” IEEE Journal of Robotics and Automation vol. 1, pp. 95–103, 1985.
145. V.J. Lumelsky, Sensing, Intelligence, Motion: How Robots and Humans Move in an Unstructured World, Wiley, Hoboken, NJ, 2006.
146. Y. Ma, S. Soatto, J. Kosecka, S. Sastry, An Invitation to 3-D Vision: From Images to Geometric Models, Springer, New York, 2003.
147. A.A. Maciejewski, C.A. Klein, “Obstacle avoidance for kinematically redundant manipulators in dynamically varying environments,” International Journal of Robotics Research, vol. 4, no. 3, pp. 109–117, 1985.
148. E. Malis, F. Chaumette, S. Boudet, “2-1/2D visual servoing,” IEEE Transactions on Robotics and Automation, vol. 15, pp. 238–250, 1999.
149. B.R. Markiewicz, Analysis of the Computed Torque Drive Method and Comparison with Conventional Position Servo for a Computer-Controlled Manipulator, memo. TM 33-601, JPL, Pasadena, CA, 1973.
150. M.T. Mason, “Compliance and force control for computer controlled manipulators,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 6, pp. 418– 432, 1981.
151. J.M. McCarthy, An Introduction to Theoretical Kinematics, MIT Press, Cambridge, MA, 1990.
152. N.H. McClamroch, D. Wang, “Feedback stabilization and tracking of constrained robots,” IEEE Transactions on Automatic Control, vol. 33, pp. 419– 426, 1988.
153. R.T. M’Closkey, R.M. Murray, “Exponential stabilization of driftless nonlinear control systems using homogeneous feedback,” IEEE Transactions on Automatic Control, vol. 42, pp. 614–628, 1997.
154. L. Meirovitch, Dynamics and Control of Structures, Wiley, New York, 1990.
155. C. Melchiorri, Traiettorie per Azionamenti Elettrici, Progetto Leonardo, Bologna, I, 2000.
156. N. Manring, Hydraulic Control Systems, Wiley, New York, 2005.
157. R. Middleton, G.C. Goodwin, “Adaptive computed torque control for rigid link manipulators,” Systems & Control Letters, vol. 10, pp. 9–16, 1988.
158. R.R. Murphy, Introduction to AI Robotics, MIT Press, Cambridge, MA, 2000.
159. R.M. Murray, Z. Li, S.S. Sastry, A Mathematical Introduction to Robotic Manipulation, CRC Press, Boca Raton, CA. 1994.
160. Y. Nakamura, Advanced Robotics: Redundancy and Optimization, Addison Wesley, Reading, MA, 1991.
161. Y. Nakamura, H. Hanafusa, “Inverse kinematic solutions with singularity robustness for robot manipulator control,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 108, pp. 163–171, 1986.
162. Y. Nakamura, H. Hanafusa, “Optimal redundancy control of robot manipulators,” International Journal of Robotics Research, vol. 6, no. 1, pp. 32–42, 1987.
163. Y. Nakamura, H. Hanafusa, T. Yoshikawa, “Task-priority based redundancy control of robot manipulators,” International Journal of Robotics Research, vol. 6, no. 2, pp. 3–15, 1987.
164. J.I. Neimark, F.A. Fufaev, Dynamics of Nonholonomic Systems, American Mathematical Society, Providence, RI, 1972.
165. I. Nevins, D.E. Whitney, “The force vector assembler concept,” Proc. First CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators, Udine, I, 1973.
166. F. Nicolò, J. Katende, “A robust MRAC for industrial robots,” Proc. 2nd IASTED International Symposium on Robotics and Automation, pp. 162–171, Lugano, Switzerland, 1983.
167. S. Nicosia, P. Tomei, “Model reference adaptive control algorithms for industrial robots,” Automatica, vol. 20, pp. 635–644, 1984.
168. H. Nijmeijer, A. van der Schaft, Nonlinear Dynamical Control Systems, Springer-Verlag, Berlin, Germany, 1990.
169. B. Noble, Applied Linear Algebra, 3rd ed., Prentice-Hall, Englewood Cliffs, NJ, 1987.
170. C. O’Dúnlaing, C.K. Yap, “A retraction method for planning the motion of a disc,” Journal of Algorithms, vol. 6, pp. 104–111, 1982.
171. K. Ogata, Modern Control Engineering, 4th ed., Prentice-Hall, Englewood Cliffs, NJ, 2002.
172. D.E. Orin, R.B. McGhee, M. Vukobratović, G. Hartoch, “Kinematic and kinetic analysis of open-chain linkages utilizing Newton–Euler methods,” Mathematical Biosciences vol. 43, pp. 107–130, 1979.
173. D.E. Orin, W.W. Schrader, “Efficient computation of the Jacobian for robot manipulators,” International Journal of Robotics Research, vol. 3, no. 4, pp. 66– 75, 1984.
174. G. Oriolo, A. De Luca, M. Vendittelli, “WMR control via dynamic feedback linearization: Design, implementation and experimental validation,” IEEE Transactions on Control Systems Technology, vol. 10, pp. 835–852, 2002.
175. R. Ortega, M.W. Spong, “Adaptive motion control of rigid robots: A tutorial,” Automatica, vol. 25, pp. 877–888, 1989.
176. T. Patterson, H. Lipkin, “Duality of constrained elastic manipulation,” Proc. 1991 IEEE International Conference on Robotics and Automation, pp. 2820– 2825, Sacramento, CA, 1991.
177. T. Patterson, H. Lipkin, “Structure of robot compliance,” ASME Journal of Mechanical Design, vol. 115, pp. 576–580, 1993.
178. R.P. Paul, Modelling, Trajectory Calculation, and Servoing of a Computer Controlled Arm, memo. AIM 177, Stanford Artificial Intelligence Laboratory, 1972.
179. R.P. Paul, “Manipulator Cartesian path control,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 9, pp. 702–711, 1979.
180. R.P. Paul, Robot Manipulators: Mathematics, Programming, and Control, MIT Press, Cambridge, MA, 1981.
181. R.P. Paul, B.E. Shimano, G. Mayer, “Kinematic control equations for simple manipulators,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 11, pp. 449–455, 1981.
182. R.P. Paul, H. Zhang, “Computationally efficient kinematics for manipulators with spherical wrists based on the homogeneous transformation representation,” International Journal of Robotics Research, vol. 5, no. 2, pp. 32–44, 1986.
183. D.L. Pieper, The Kinematics of Manipulators Under Computer Control memo. AIM 72, Stanford Artificial Intelligence Laboratory, 1968.
184. M.H. Raibert, J.J. Craig, “Hybrid position/force control of manipulators,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 103, pp. 126–133, 1981.
185. E. Rimon, D.E. Koditschek, “The construction of analytic diffeomorphisms for exact robot navigation on star worlds,” Proc. 1989 IEEE International Conference on Robotics and Automation, Scottsdale, AZ, pp. 21–26, 1989.
186. E.I. Rivin, Mechanical Design of Robots, McGraw-Hill, New York, 1987.
187. R.E. Roberson, R. Schwertassek, Dynamics of Multibody Systems, Springer Verlag, Berlin, Germany, 1988.
188. Z. Roth, B.W. Mooring, B. Ravani, “An overview of robot calibration,” IEEE Journal of Robotics and Automation, vol. 3, pp. 377–386, 1987.
189. S. Russell, P. Norvig, Artificial Intelligence: A Modern Approach, 2nd ed., Prentice Hall, Englewood Cliffs, NJ, 2003.
190. J.K. Salisbury,“Active stiffness control of a manipulator in Cartesian coordinates,” Proc. 19th IEEE Conference on Decision and Control, pp. 95–100, Albuquerque, NM, 1980.
191. J.K. Salisbury, J.J. Craig, “Articulated hands: Force control and kinematic issues,” International Journal of Robotics Research, vol. 1, no. 1, pp. 4–17, 1982.
192. C. Samson, “Robust control of a class of nonlinear systems and applications to robotics,” International Journal of Adaptive Control and Signal Processing, vol. 1, pp. 49–68, 1987.
193. C. Samson, “Time-varying feedback stabilization of car-like wheeled mobile robots,” International Journal of Robotics Research, vol. 12, no. 1, pp. 55–64, 1993.
194. C. Samson, M. Le Borgne, B. Espiau, Robot Control: The Task Function Approach, Clarendon Press, Oxford, UK, 1991.
195. S. Sastry, Nonlinear Systems: Analysis, Stability and Control, Springer-Verlag, Berlin, Germany, 1999.
196. V.D. Scheinman, Design of a Computer Controlled Manipulator, memo. AIM 92, Stanford Artificial Intelligence Laboratory, 1969.
197. J.T. Schwartz, M. Sharir, “On the ‘piano movers’ problem: II. General techniques for computing topological properties of real algebraic manifolds,” Advances in Applied Mathematics, vol. 4, pp. 298–351, 1983.
198. L. Sciavicco, B. Siciliano, “Coordinate transformation: A solution algorithm for one class of robots,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 16, pp. 550–559, 1986.
199. L. Sciavicco, B. Siciliano, “A solution algorithm to the inverse kinematic problem for redundant manipulators,” IEEE Journal of Robotics and Automation, vol. 4, pp. 403–410, 1988.
200. L. Sciavicco, B. Siciliano, Modelling and Control of Robot Manipulators, 2nd ed., Springer, London, UK, 2000.
201. L. Sciavicco, B. Siciliano, L. Villani, “Lagrange and Newton–Euler dynamic modeling of a gear-driven rigid robot manipulator with inclusion of motor inertia effects,” Advanced Robotics, vol. 10, pp. 317–334, 1996.
202. R. Sedgewick, Algorithms, 2nd ed., Addison-Wesley, Reading, MA, 1988.
203. H. Seraji, “Configuration control of redundant manipulators: Theory and implementation,” IEEE Transactions on Robotics and Automation, vol. 5, pp. 472–490, 1989.
204. S.W. Shepperd, S.W., “Quaternion from rotation matrix,” AIAA Journal of Guidance and Control, vol. 1, pp. 223–224, 1978.
205. R. Shoureshi, M.E. Momot, M.D. Roesler, “Robust control for manipulators with uncertain dynamics,” Automatica, vol. 26, pp. 353–359, 1990.
206. B. Siciliano, “Kinematic control of redundant robot manipulators: A tutorial,” Journal of Intelligent and Robotic Systems, vol. 3, pp. 201–212, 1990.
207. B. Siciliano, “A closed-loop inverse kinematic scheme for on-line joint based robot control,” Robotica, vol. 8, pp. 231–243, 1990.
208. B. Siciliano, J.-J.E. Slotine, “A general framework for managing multiple tasks in highly redundant robotic systems,” Proc. 5th International Conference on Advanced Robotics, Pisa, I, pp. 1211–1216, 1991.
209. B. Siciliano, L. Villani, Robot Force Control, Kluwer, Boston, MA, 2000.
210. R. Siegwart, I.R. Nourbakhsh, Introduction to Autonomous Mobile Robots, MIT Press, Cambridge, MA, 2004.
211. D.B. Silver, “On the equivalence of Lagrangian and Newton–Euler dynamics for manipulators,” International Journal of Robotics Research, vol. 1, no. 2, pp. 60–70, 1982.
212. J.-J.E. Slotine, “The robust control of robot manipulators,” International Jorunal of Robotics Research, vol. 4, no. 2, pp. 49–64, 1985.
213. J.-J.E. Slotine, “Putting physics in control — The example of robotics,” IEEE Control Systems Magazine, vol. 8, no. 6, pp. 12–18, 1988.
214. J.-J.E. Slotine, W. Li, “On the adaptive control of robot manipulators,” International Journal of Robotics Research, vol. 6, no. 3, pp. 49–59, 1987.
215. J.-J.E. Slotine, W. Li, Applied Nonlinear Control, Prentice-Hall, Englewood Cliffs, NJ, 1991.
216. M.W. Spong, “On the robust control of robot manipulators,” IEEE Transactions on Automatic Control, vol. 37, pp. 1782–1786, 1992.
217. M.W. Spong, S. Hutchinson, M. Vidyasagar, Robot Modeling and Control, Wiley, New York, 2006.
218. M.W. Spong, R. Ortega, R. Kelly, “Comments on “Adaptive manipulator control: A case study”,” IEEE Transactions on Automatic Control, vol. 35, pp. 761–762, 1990.
219. M.W. Spong, M. Vidyasagar, “Robust linear compensator design for nonlinear robotic control,” IEEE Journal of Robotics and Automation, vol. 3, pp. 345– 351, 1987.
220. SRI International, Robot Design Handbook, G.B. Andeen, (Ed.), McGraw-Hill, New York, 1988.
221. Y. Stepanenko, M. Vukobratović, “Dynamics of articulated open-chain active mechanisms,” Mathematical Biosciences, vol. 28, pp. 137–170, 1976.
222. Y. Stepanenko, J. Yuan, “Robust adaptive control of a class of nonlinear mechanical systems with unbounded and fast varying uncertainties,” Automatica, vol. 28, pp. 265–276, 1992.
223. S. Stramigioli, Modeling and IPC Control of Interactive Mechanical Systems — A Coordinate Free Approach, Springer, London, UK, 2001.
224. K.R. Symon, Mechanics, 3rd ed., Addison-Wesley, Reading, MA, 1971.
225. K. Takase, R. Paul, E. Berg, “A structured approach to robot programming and teaching,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 11, pp. 274–289, 1981.
226. M. Takegaki, S. Arimoto, “A new feedback method for dynamic control of manipulators,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 102, pp. 119–125, 1981.
227. T.-J. Tarn, A.K. Bejczy, X. Yun, Z. Li, “Effect of motor dynamics on nonlinear feedback robot arm control,” IEEE Transactions on Robotics and Automation, vol. 7, pp. 114–122, 1991.
228. T.-J. Tarn, Y. Wu, N. Xi, A. Isidori, “Force regulation and contact transition control,” IEEE Control Systems Magazine, vol. 16, no. 1, pp. 32–40, 1996.
229. R.H. Taylor, “Planning and execution of straight line manipulator trajectories,” IBM Journal of Research and Development, vol. 23, pp. 424–436, 1979.
230. R.H. Taylor, D.D. Grossman, “An integrated robot system architecture,” Proceedings IEEE, vol. 71, pp. 842–856, 1983.
231. S. Thrun, W. Burgard, D. Fox, Probabilistic Robotics, MIT Press, Cambridge, MA, 2005.
232. L.W. Tsai, A.P. Morgan, “Solving the kinematics of the most general six- and five-degree-of-freedom manipulators by continuation methods,” ASME Journal of Mechanisms, Transmission, and Automation in Design, vol. 107, pp. 189– 200, 1985.
233. R. Tsai, “A versatile camera calibration technique for high accuracy 3-D machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE Transactions on Robotics and Automation, vol. 3, pp. 323–344, 1987.
234. J.J.Uicker, “Dynamic force analysis of spatial linkages,” ASME Journal of Applied Mechanics, vol. 34, pp. 418–424, 1967.
235. L. Villani, C. Canudas de Wit, B. Brogliato, “An exponentially stable adaptive control for force and position tracking of robot manipulators,” IEEE Transactions on Automatic Control, vol. 44, pp. 798–802, 1999.
236. M. Vukobratović, “Dynamics of active articulated mechanisms and synthesis of artificial motion,” Mechanism and Machine Theory, vol. 13, pp. 1–56, 1978.
237. M.W. Walker, D.E. Orin, “Efficient dynamic computer simulation of robotic mechanisms,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 104, pp. 205–211, 1982.
238. C.W. Wampler, “Manipulator inverse kinematic solutions based on damped least-squares solutions,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 16, pp. 93–101, 1986.
239. L. Weiss, A. Sanderson, C. Neuman, “Dynamic sensor-based control of robots with visual feedback,” IEEE Journal of Robotics and Automation, vol. 3, pp. 404–417, 1987.
240. D.E. Whitney, “Resolved motion rate control of manipulators and human prostheses,” IEEE Transactions on Man-Machine Systems, vol. 10, pp. 47–53, 1969.
241. D.E. Whitney, “Force feedback control of manipulator fine motions,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 99, pp. 91–97, 1977.
242. D.E. Whitney, “Quasi-static assembly of compliantly supported rigid parts,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 104, pp. 65–77, 1982.
243. D.E. Whitney, “Historical perspective and state of the art in robot force control,” International Journal of Robotics Research, vol. 6, no. 1, pp. 3–14, 1987.
244. W. Wilson, C. Hulls, G. Bell, “Relative end-effector control using Cartesian position based visual servoing,” IEEE Transactions on Robotics and Automation, vol. 12, pp. 684–696, 1996.
245. T. Yoshikawa, “Manipulability of robotic mechanisms,” International Journal of Robotics Research, vol. 4, no. 2, pp. 3–9, 1985.
246. T. Yoshikawa, “Dynamic manipulability ellipsoid of robot manipulators,” Journal of Robotic Systems, vol. 2, pp. 113–124, 1985.
247. T. Yoshikawa, “Dynamic hybrid position/force control of robot manipulators — Description of hand constraints and calculation of joint driving force,” IEEE Journal of Robotics and Automation, vol. 3, pp. 386–392, 1987.
248. T. Yoshikawa, Foundations of Robotics, MIT Press, Boston, MA, 1990.
249. T. Yoshikawa, T. Sugie, N. Tanaka, “Dynamic hybrid position/force control of robot manipulators — Controller design and experiment,” IEEE Journal of Robotics and Automation, vol. 4, pp. 699–705, 1988.
250. J.S.-C. Yuan, “Closed-loop manipulator control using quaternion feedback,” IEEE Journal of Robotics and Automation, vol. 4, pp. 434–440, 1988.