Handbook of modern sensors: Physics, designs, and applications

Handbook of Modern Sensors: Physics, Designs, and Applications

Volumn , Issue , 2016, Pages 1-758

  Fraden, Jacob ^a  

^a Fraden Corp   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENGINEERS;

CONSUMER APPLICATIONS; ELECTRICAL CHARGES; EMBEDDED PROCESSING; INTERFACE DEVICES; LATEST DEVELOPMENT; MODERN INSTRUMENTATION; PHYSICAL PRINCIPLES; SENSING TECHNOLOGY;

EMBEDDED SYSTEMS;

EID: 84955678972     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-319-19303-8     Document Type: Book

References (421)

1. Thompson, S. (1989). Control systems: Engineering & design. Essex, England: Longman Scientific & Technical.
2. Norton, H. N. (1989). Handbook of transducers. Englewood Cliffs, NJ: Prentice Hall.
3. White, R. W. (1991). A sensor classification scheme. In Microsensors (pp. 3–5). New York: IEEE Press.
4. Thompson, A., & Taylor, B. N. (2008). Guide for the use of the international system of units (SI). NIST Special Publication 811, National Institute of Standards and Technology, Gaithersburg, MD 20899, March 2008.
5. Stoer, J., & Bulirsch, R. (1991). Introduction to numerical analysis (2nd ed., pp. 93–106). New York, NY: Springer.
6. Kelley, C. T. (2003). Solving nonlinear equations with Newton’s method. Number 1 in Fundamental algorithms for numerical calculations. Philadelphia, PA: SIAM.
7. Suli, E., & Mayers, D. (2003). An introduction to numerical analysis. Cambridge, UK: Cambridge University Press.
8. Fraden, J. (2015). Medical sensors for mobile communication devices, Chapt. D-11. In H. Eren & J. G. Webster (Eds.), The E-medicine, E-health, M-health, telemedicine and telehealth handbook. Boca Raton, FL: CRC Press.
9. Fraden, J., et al. (2012, September 25). Wireless communication device with integrated electromagnetic sensors. U.S. Patent No. 8,275,413.
10. U.S. Dept. of Defense. (1991, December 2). Military handbook. Reliability prediction of electronic equipment (Mil-HDBK-217F).
11. Department of Defense. (1996, December 31). Test method standard. Microcircuits (MIL-STD-883E).
12. Suhir, E. (2007). How to make a device into a product. Accelerated life testing (ALT), its role attributes, challenges, pitfalls and interaction with qualification tests, Chapt. 8. In E. Suhir, Y. C. Lee, & C. P. Wong (Eds.), Micro- and opto-electronic materials and structures: physics, mechanics, design, reliability, packaging (Vol. 2, pp. 203–230). New York: Springer.
13. Suhir, E., et al. (2014, March). Highly accelerated life testing (HALT), failure oriented accelerated Testing (FOAT), and their role in making a viable device into a reliable product. 2014 I.E. Aerospace Conference, Big Sky, Montana.
14. Suhir, E. (2014, March 9–13). Failure-oriented-accelerated-testing (FOAT) and its role in making a viable IC package into a reliable product. SEMI-THERM 2014, San Jose, CA.
15. Suhir, E., et al. (2014, March). Application of multi-parametric BAZ Model in aerospace optoelectronics. IEEE Aerospace Conference, Big Sky, Montana.
16. Taylor, B. N., et al. (1994). Guidelines for evaluation and expressing the uncertainty of NIST Measurement Results (NIST Technical Note 1297).
17. CIPM. (1981). BIPM Proc.-Verb. Com. Int. Poids et Mesures (in French) 49, 8–9, No. 26.
18. International Organization for Standardization. (1993). ISO Guide to the expression of uncertainty in measurements. Geneva, Switzerland: Author.
19. Better reliability via system tests. (1991, August 19). Electronic Engineering Times, CMP Publication, 40–41.
20. Halliday, D., et al. (1986). Fundamentals of physics (2nd ed.). New York: John Wiley & Sons.
21. Crotzer, D., et al. (1993) Method for manufacturing hygristors. U.S. Patent No. 5,273,777.
22. Meissner, A. (1927). U¨ ber piezoelectrische Krystalle bei Hochfrequenz. Zeitschrift f€ur Technische Physik, 8(74).
23. Neubert, H. K. P. (1975). Instrument transducers. An introduction to their performance and design (2nd ed.). Oxford: Clarendon.
24. Radice, P. F. (1982). Corona discharge poling process. U.S. Patent No. 4,365,283.
25. Southgate, P. D. (1976). Room-temperature poling and morphology changes in pyroelectric polyvinylidene fluoride. Applied Physics Letters, 28, 250.
26. Jaffe, B., et al. (1971). Piezoelectric ceramics. London: Academic.
27. Mason, W. P. (1950). Piezoelectric crystals and their application to ultrasonics. New York: Van Nostrand.
28. Megaw, H. D. (1957). Ferroelectricity in crystals. London: Methuen.
29. Oikawa, A., et al. (1976). Preparation of Pb(Zr, Ti)O3 thin films by an electron beam evaporation technique. Applied Physics Letters, 29, 491.
30. Okada, A. (1977). Some electrical and optical properties of ferroelectric lead-zirconite-leadtitanate thin films. Journal of Applied Physics, 48, 2905.
31. Castelano, R. N., et al. (1979). Ion-beam deposition of thin films of ferroelectric lead-zirconitetitanate (PZT). Journal of Applied Physics, 50, 4406.
32. Adachi, H., et al. (1986). Ferroelectric (Pb, La)(Zr, Ti)O3 epitaxial thin films on sapphire grown by RF-planar magnetron sputtering. Journal of Applied Physics, 60, 736.
33. Ogawa, T., et al. (1989). Preparation of ferroelectric thin films by RF sputtering. Journal of Applied Physics, 28, 11–14.
34. Roy, D., et al. (1991). Excimer laser ablated lead zirconite titanate thin films. Journal of Applied Physics, 69, 1.
35. Yi, G., et al. (1989). Preparation of PZT thin film by sol-gel processing: Electrical, optical, and electro-optic properties. Journal of Applied Physics, 64, 2717.
36. Tamura, M., et al. (1975). Electroacoustical transducers with piezoelectric high polymer. Journal of the Audio Engineering Society, 23(31), 21–26.
37. Elliason, S. (1984). Electronic properties of piezoelectric polymers. Report TRITA-FYS 6665 from Dept. of Applied Physics, The Royal Inst. of Techn., Stockholm, Sweden.
38. Dargahi, J. (2000). A piezoelectric tactile sensor with three sensing elements for robotic, endoscopic and prosthetic applications. Sensors and Actuators A: Physical, 80(1), 1–90.
39. Kawai, H. (1969). The piezoelectricity of poly (vinylidene fluoride). Japanese Journal of Applied Physics, 8, 975–976.
40. Meixner, H., et al. (1986). Infrared sensors based on the pyroelectric polymer polyvinylidene fluoride (PVDF). Siemens Forsch-u Entwicl Ber Bd, 15(3), 105–114.
41. Ye, C., et al. (1991). Pyroelectric PbTiO3 thin films for microsensor applications. In: Transducers‘ 91 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers (pp. 904–907). #IEEE
42. Beer, A. C. (1963). Galvanomagnetic effect in semiconductors. In F. Seitz & D. Turnbull (Eds.), Suppl. to solid state physics. New York: Academic.
43. Putlye, E. H. (1960). The Hall effect and related phenomena. In C. A. Hogarth (Ed.), Semiconductor monographs. London: Butterwort.
44. Williams, J. (1990). Thermocouple measurement, AN28. In: Linear applications handbook. # Linear Technology Corp.
45. Seebeck, T. (1822–1823). Magnetische Polarisation der Metalle und Erze durch Temperatur-Differenz. Abhaandulgen der Preussischen Akademic der Wissenschaften (pp. 265–373).
46. Benedict, R. P. (1984). Fundamentals of temperature, pressure, and flow measurements (3rd ed.). New York: John Wiley & Sons.
47. LeChatelier, H. (1962). Copt. Tend., 102, 188629. In: D. K. C. MacDonald (Eds.), Thermoelectricity: An introduction to the principles. New York: John Wiley & Sons.
48. Carter, E. F. (1966). Dictionary of inventions and discoveries. In F. Muller (Ed.), Crane. New York: Russak.
49. Peltier, J. C. A. (1834). Investigation of the heat developed by electric currents in homogeneous materials and at the junction of two different conductors. Annals of Physical Chemistry, 56(2nd ser.), 371–386.
50. Thomson, W. (1854, May). On the thermal effects of electric currents in unequal heated conductors. Proceedings of the Royal Soc. (Vol. VII).
51. Manual on the use of thermocouples in temperature measurement. (1981). ASTM Publication code number 04-470020-40. Philadelphia: ASTM.
52. Doebelin, E. O. (1990). Measurement systems: Application and design (4th ed.). New York: McGraw-Hill.
53. Holman, J. P. (1972). Heat transfer (3rd ed.). New York: McGraw-Hill Book.
54. Fraden, J. (2002). Blackbody cavity for calibration of infrared thermometers. U.S. Patent No. 6447160.
55. Feynman, R. P. (2006). QED: The strange theory of light and matter. Princeton, NJ: Princeton University Press.
56. Stover, J. C. (1995). Optical scattering: Measurement and analysis. Bellingham, WA: SPIE Optical Engineering Press.
57. Begunov, B. N., et al. (1988). Optical instrumentation. Theory and design. Moscow: Mir Publishers.
58. Katz, M. (1994). Introduction to geometrical optics. New York: Penumbra Publishing.
59. Kingslake, R. (1978). Lens design fundamentals. New York: Academic Press.
60. Sirohi, R. S. (1979). Design and performance of plano-cylindrical fresnel lens. Applied Optics, 45(4), 1509–1512.
61. Aieta, F., et al. (2012). Aberration-free ultrathin flat lenses and axicons at telecom wavelengths based on plasmonic metasurfaces. Nano Letters. dx.doi.org/10.1021/nl302516v
62. Giuliani, J. F. (1989). Optical waveguide chemical sensors. In Chemical sensors and microinstrumentation. Chapt. 24. Washington, DC: American Chemical Society.
63. Johnson, L. M. (1991). Optical modulators for fiber optic sensors. In E. Udd (Ed.), Fiber optic sensors: Introduction for engineers and scientists. Hoboken, NJ: John Wiley & Sons.
64. Welford, W. T., et al. (1989). High collection nonimaging optics. San Diego: Academic.
65. Winston, R., et al. (1971). Retinal cone receptor as an ideal light collector. Journal of the Optical Society of America, 61, 1120–1121.
66. Leutz, R., et al. (2001). Nonimaging fresnel lenses: Design and performance of solar concentrators. Berlin: Springer Verlag.
67. Persky, M. J. (1999). Review of black surfaces for space-borne infrared systems. Review of Scientific Instruments, 70(5), 2193–2217.
68. Lang, W., et al. (1991). Absorption layers for thermal infrared detectors. In: Transducers‘91. International Conference on Solid-State Sensors and Actuators. Digest of technical papers (pp. 635–638). IEEE.
69. Harris, L., et al. (1948). The Preparation and Optical Properties of Gold Blacks. J. of the Opt. Soc. of Am., 38, 582–588.
70. Jiang, B. et al. (2013). Design and analysis of hermetic single chip packaging for large format thermistor. Applied Mechanics and Materials. 3, 1-x manuscripts.
71. Widlar, R. J. (1980). Working with high impedance Op Amps, AN24. Linear application handbook. National Semiconductor.
72. Park, Y. E., et al. (1983). An MOS switched-capacitor readout amplifier for capacitive pressure sensors. IEEE Custom IC Conf. (pp. 380–384).
73. Cho, S. T., et al. (1991). A self-testing ultrasensitive silicon microflow sensor. Sensor Expo Proceedings (p. 208B-1).
74. Ryhanen, T. (1996). Capacitive transducer feedback-controlled by means of electrostatic force and method for controlling the profile of the transducing element in the transducer. U.S. Patent 5531128.
75. Pease, R. A. (1983, January 20). Improve circuit performance with a 1-op-amp current pump. EDN (pp. 85–90).
76. Bell, D. A. (1981). Solid state pulse circuits (2nd ed.). Reston, VA: Reston Publishing Company.
77. Sheingold, D. H. (Ed.). (1986). Analog-digital conversion handbook (3rd ed.). Englewood Cliffs, NJ: Prentice-Hall.
78. Johnson, C., et al. (1986). Highly accurate resistance deviation to frequency converter with programmable sensitivity and resolution. IEEE Transactions on Instrumentation and Measurement, IM-35, 178–181.
79. AVR121: Enhancing ADC resolution by oversampling. (2005). Atmel Application Note 8003A-AVR-09/05.
80. Coats, M. R. (1991). New technology two-wire transmitters. Sensors, 8(1).
81. Johnson, J. B. (1928). Thermal agitation of electricity in conductors. Physical Review, 32, 97–109.
82. Rich, A. (1991). Shielding and guarding. In: Best of analog dialogue. #Analog Devices.
83. Ott, H. W. (1976). Noise reduction techniques in electronic systems. New York: John Wiley & Sons.
84. Pascoe, G. (1977, February 6). The choice of solders for high-gain devices. New Electronics (U.K.).
85. Jensen, M. (2010). White Paper SWRA349. Texas Instruments.
86. Powers, R. A. (1995). Batteries for low power electronics. Proceedings of the IEEE, 83(4), 687–693.
87. Batra, A., et al. (2011). Simulation of energy harvesting from roads via pyroelectricity. Journal of Photonics for Energy, 1(1), 014001.
88. Le, T. T., et al. (2009). RF energy harvesting circuit. U.S. Patent publ. No. 2009/0152954.
89. Mickle, M. H., et al. (2006). Energy harvesting circuit. U.S. Patent No. 7084605.
90. Butler, P. (2012). Harvesting power in near field communication (NFC) device. U.S. Patent No. 8326224.
91. Safak, M. (2014). Wireless sensor and communication nodes with energy harvesting. Journal of Communication, Navigation, Sensing and Services, 1, 47–66.
92. Blumenkrantz, S. (1989). Personal and organizational security handbook. Washington, DC: Government data publications.
93. Sarabia, E. G., et al. (2013). Accurate estimation of airborne ultrasonic time-of-flight for overlapping echoes. Sensors, 13(11), 15465–15488.
94. Kyrynyuk, V. et al. (2014), Automotive ultrasonic distance measurement for park-assist systems. AN76530. cypress.com
95. McEwan, T. E. (1994, November 1). Ultra-wideband radar motion sensor. U.S. Patent No. 5,361,070.
96. Azevedo, S. G., et al. (1995). Landmine detection and imaging using micropower impulse radar (MIR). Proceedings of the Workshop on Anti-personnel Mine Detection and Removal, July 1, 1995, Lausanne, Switzerland (pp. 48–51).
97. Boles, S. et al. (1995). Signal processing for ultra-wide band impulse radar. U.S. Patent No. 5381151.
98. Staderini, E. M. (2002). UWB radars in medicine. IEEE Aerospace and Electronic Systems Magazine, 17(1), 13–18.
99. van Drecht, J., et al. (1991). Concepts for the design of smart sensors and smart signal processors and their applications to PSD displacement transducers. In: Transducers‘91. International Conference on Solid-State Sensors and Actuators. Digest of technical papers (pp. 475–478). #IEEE.
100. Long, D. J. (1975, August 5). Occupancy detector apparatus for automotive safety system. U.S. Patent No. 3,898,472.
101. Gao, X. (2013). Microchip capacitive proximity design guide. AN1492, DS01492A, Microchip Technology Inc.
102. Fraden, J. (1991, May 28). Apparatus and method for detecting movement of an object. U.S. Patent No. 5,019,804.
103. Fraden, J. (1984, May 22). Motion discontinuance detection system and method. U.S. Patent No. 4,450,351.
104. Fitz Gerald, A. S. (1932, February 4). Photo-electric system. U.S. Patent No. 2,016,036.
105. Fraden, J. (1984, October 30). Toy including motion-detecting means for activating same. U.S. Patent No. 4,479,329.
106. Fraden, J. (1988, September 6). Motion detector. U.S. Patent No. 4,769,545.
107. Fraden, J. (1990, January 23). Active infrared motion detector and method for detecting movement. U.S. Patent No. 4,896,039.
108. Fraden, J. (1992). Active far infrared detectors. In: Temperature. Its measurement and control in science and industry (Vol. 6, Part 2, pp. 831–836). New York: #AIP.
109. APDS-9700. (2010). Signal conditioning IC for optical proximity sensors. Avago Technologies. www.avagotech.com
110. Parsons, N. E., et al. (2003, September 16). Automatic flow controller employing energyconservation mode. U.S. Patent No. 6,619,614.
111. Parsons, N. E., et al. (2008, July 8). Passive sensors for automatic faucets and bathroom flushers. U.S. Patent No. 7,396,000.
112. Fraden, J. (2007, August 31). Alarm system with air pressure detector. U.S. Patent Publication No. US 2008/0055079.
113. Fraden, J. (2009, February 17). Detector of low levels of gas pressure and flow. U.S. Patent No. 7,490,512.
114. Kirsch, S. T. (1985, October 8). Detector for electro-optical mouse. U.S. Patent No. 4546347.
115. Theremin, L. (1928, February 28). Method of and apparatus for the generation of sounds. U.S. Patent No. 1661058.
116. Silicon Laboratories Inc. (2011). Infrared gesture sensing. AN580. www.silabs.com
117. Microchip Technology. (2013). Gest IC design guide: Electrodes and system design. MGC3130. Microchip Technology.
118. Measurement Specialties. (1999, April). Piezo film sensors technical manual. Norristown, PA: Measurement Specialties. www.msiusa.com
119. Fraden, J. (1985). Cardio-respiration transducer. U.S. Patent No. 4509527.
120. Del Prete, Z., et al. (2001). A novel pressure array sensor based on contact resistance variation: Metrological properties. Review of Scientific Instruments, 72(3), 1548–1553.
121. Someya, T., et al. (2004). A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applications. Proceedings of the National Academy of Sciences of the United States of America, 101(27), 9966–9970.
122. Mei, T., et al. (2000). An integrated MEMS three-dimensional tactile sensor with large force range. Sensors and Actuators, 80, 155–162.
123. Huff, M. A., et al. (1991). A threshold pressure switch utilizing plastic deformation of silicon. In: Transducers‘91. International Conference on Solid-State Sensors and Actuators. Digest of technical papers (pp. 177–180). #IEEE.
124. Fujitsu Michroelectronics America. (2009). Touch screen controller technology and application trends. Fujitsu Technology Backgrounder.
125. Lee, H.-K., et al. (2006). A flexible polymer tactile sensor: Fabrication and modular expandability for large area deployment. Journal of Microelectromechanical Systems, 15(6), 1681–1686.
126. Ding, H., et al. (2006). Refractive indices of human skin tissues at eight wavelengths and estimated dispersion relations between 300 and 1600 nm. Physics in Medicine and Biology, 51, 1479–1489.
127. Parsons, N. E., et al. (1999, November 16). Object-sensor-based flow-control system employing fiber-optic signal transmission. U.S. Patent No. 5,984,262.
128. Wilkinson, P., et al. (2008). Nanomechanical properties of piezoresistive cantilevers: Theory and experiment. Journal of Applied Physics, 104, 103527.
129. Cullinan, M., et al. (2010). Carbon nanotubes as piezoresistive microelectromechanical sensors: Theory and experiment. Physical Review, B82, 115428.
130. Young, D., et al. (1996, June). A micromachined variable capacitor for monolithic low-noise VCOs. Solid-State Sensor and Actuator Workshop. Hilton Head, SC.
131. Barker, M. J., et al. (1997). A two-dimensional capacitive position transducer with rotation output. Review of Scientific Instruments, 68(8), 3238–3240.
132. Peters, R. D. (1994, November 3). Symmetric differential capacitance transducer employing cross coupled conductive plates to form equipotential pairs. U.S. Patent No. 5461319.
133. De Silva, C. W. (1989). Control sensors and actuators. Englewood Cliffs, NJ: Prentice Hall.
134. Bruce, R. (1984, February 7). Loop detector for traffic signal control. U.S. Patent No. 4430636.
135. Lees, R. H. (2002, January 8). Inductive loop sensor for traffic detection. U.S. Patent No. 6337640.
136. Hall effect sensing and application. Honeywell, Inc. www.honeywell.com/sensing
137. Popovic, R. S., et al. (2002). Hall ASICs with integrated magnetic concentrators. Proceedings of the Sensors Expo & Conference, Boston, USA.
138. Palumbo, V., et al. (2013). Hall current sensor IC with integrated Co-based alloy thin film magnetic concentrator. EPJ Web of Conferences 40, 16002.
139. Born, M., et al. (1984). Principles of optics (6th ed.). London: Pergamon.
140. Lee, C. E., et al. (1991). Fiber-optic Fabry-Perot temperature sensor using a low-coherence light source. Journal of Lightwave Technology, 9, 129–134.
141. Wolthuis, R. A., et al. (1991). Development of medical pressure and temperature sensors employing optical spectrum modulation. IEEE Transactions on Biomedical Engineering, 38, 974–980.
142. Hill, K. O., et al. (1978). Photosensitivity in optical fiber waveguides: Application to reflection fiber fabrication. Applied Physics Letters, 32(10), 647.
143. Spillman, W. B., (1981). Multimode fiber-optic hydrophone based on a schlieren technique. Applied Optics, 20, 465.
144. In-Depth Ablative Plug Transducers (1992). Series #S-2835, Hycal Engineering, 9650 Telstar Avenue, P. O. Box 5488, El Monte, California.
145. Noffz, G. K., et al. (1996). Design and laboratory validation of a capacitive sensor for measuring the recession of a thin-layered ablator. NASA Technical Memorandum 4777.
146. Brown, R. C., et al. (1978). The use of wire probes for the measurement of liquid film thickness in annular gas-liquid flows. The Canadian Journal of Chemical Engineering, 56, 754–757.
147. Graham, J., et al. (2000). Capacitance based scanner for thickness mapping of thin dielectric films. Review of Scientific Instruments, 71(5), 2219–2223.
148. Brusch, L., et al. (1999). Level meter for dielectric liquids. Review of Scientific Instruments, 70(2), 1514.
149. Park, S., et al. (2009). Oscillation control algorithms for resonant sensors with applications to vibratory gyroscopes. Sensors, 9, 5952–5967.
150. Fox, C. H. J., et al. (1984). Vibratory gyroscopic sensors. Symposium Gyro Technology (DGON).
151. Udd, E. (1991). Fiber optic sensors based on the Sagnac interferometer and passive ring resonator. In E. Udd (Ed.), Fiber optic sensors (pp. 233–269). New York: John Wiley & Sons.
152. Ezekiel, S., & Arditty, H. J. (Eds.). (1982). Fiber-optic rotation sensors (Springer series in optical sciences, Vol. 32). New York: Springer.
153. Fredericks, R. J., et al. (1984). Phase error bounds of fiber gyro with imperfect polarizer/depolarizer. Electronics Letters, 29, 330.
154. BMA220 Data sheet (2011). Bosch Sensortec GmbH.
155. Havskov, J., et al. (2004). Instrumentation in earthquake seismology. New York: Springer.
156. Sensor signal conditioning: An IC designer’s perspective. (1991, November). Sensors, 23–30.
157. Allen, H., et al. (1989). Accelerometer system with self-testable features. Sensors and Actuators, 20, 153–161.
158. Qu, P., et al. (2013). Design and characterization of a fully differential MEMS accelerometer fabricated using MetalMUMPs technology. Sensors, 13, 5720–5736.
159. Senldge, M., et al. (1987). Piezoelectric accelerometers and vibration preamplifiers. Copenhagen, Denmark: Bru¨el & Kjær.
160. Haritsuka, R., et al. (1991). A novel accelerometer based on a silicon thermopile. In: Transducers‘91. International conference on solid-state sensors and actuators. Digest of technical papers (pp. 420–423). #IEEE.
161. Fennelly, J., et al. (2012, March). Thermal MEMS accelerometers fit many applications. Sensor Magazine. www.sensormagazin.de
162. Ultra Low Cost Accelerometer MXC6226XC Data Sheet. (2010). Memsic, Inc. www.memsic. com
163. Dong, Y., et al. (2006). Force feedback linearization for higher-order electromechanical sigma–delta modulators. Journal of Micromechanics and Microengineering, 16, S54–S60.
164. Newton, I. (1687). Philosophia Naturalis Principia Mathematica. London: Joseph Streater for the Royal Society.
165. Doebelin, E. O. (1966). Measurement systems: Applications and design. New York: McGraw- Hill.
166. Ioppolo, T., et al. (2009). High-resolution force sensor based on morphology dependent optical resonances of polymeric spheres. Journal of Applied Physics, 105, 013535.
167. Tilmans, H. A. C., et al. (1992). Micro resonant force gauges. Sensors and Actuators A, 30, 35.53.
168. Suster, M., et al. (2006). A high-performance MEMS capacitive strain sensing system. Journal of Microelectromechanical Systems, 15(5), 1069.1077.
169. PallaLs-Areny, R., et al. (2001). Sensors and signal conditioning (2nd ed.). New York: John Wiley & Sons.
170. Sctefanescu, D. M. (2011). Handbook of force transducers. Principles and components. New York: Springer.
171. Holman, J. P. (1978). Experimental methods for engineers. New York: McGraw-Hill Book Co.
172. Ren, T.-L., et al. (2012). Flexible graphite-on-paper piezoresistive sensors. Sensors, 12, 6685.6694.
173. Lefort, M.-H., et al. (2000). Thick film piezoresistive ink: Application to pressure sensors. International Jounal of Microcircuits and Electronic Packaging, 23(2), 191.202.
174. Hadmani, S. T. A., et al. (2014). The application of a piezo-resistive cardiorespiratory sensor system in an automobile safety belt. Proced. Intern. Electronic Conf. on Sensors and Applications. www.mdpi.com/journal/sensors
175. Karrer, E., et al. (1977). A low range quartz pressure transducer. ISA Transactions, 16, 90.98.
176. Corbett, J. P. (1991). Quatz steady-state force and pressure sensor. In: Sensors Expo West Proceedings, paper 304A-1. Peterborough, NH: Helmers Publishing, Inc.
177. Benes, E., et al. (1995). Sensors based on piezoelectric resonators. Sensors and Actuators A, 48, 1.21.
178. Kirman, R. G., et al. (1986). Force sensors. U.S. Patent No. 4594898.
179. Wu, W., et al. (2014). Piezoelectricity of single-atomic-layer MoS2 for energy conversion and piezotronics. Nature. doi:10.1038/nature13792.
180. Piezo Film Sensors Technical Manual. (1999, April). Norristown, PA: Measurement Specialties, Inc. www.msiusa.com
181. Radice, F. P. (1991). Piezoelectric sensors and smart highways. Sensors Expo Proceed.
182. Ebisawa, M., et al. (2007, April 3). Coaxial piezoelectric cable polarizer, polarizing method, defect detector, and defect detecting method. US Patent No. 7199508.
183. Pacheco, C. J., et al. (2013). A noncontact force sensor based on a Fiber Bragg Grating and its application for corrosion measurement. Sensors, 13(9), 11476.11489.
184. Ioppolo, T., et al. (2008). Micro-optical force sensor concept based on whispering gallery mode resonators. Applied Optics, 47(16), 3009.3014.
185. Benedict, R. P. (1984). Fundamentals of temperature, pressure, and flow measurements (3rd ed.). New York, NY: John Wiley & Sons.
186. Clark, S. K., et al. (1979). Pressure sensitivity in anisotropically etched thin-diaphragm pressure sensor. IEEE Transactions on Electron Devices, ED-26, 1887–1896.
187. Kurtz, A. D., et al. (1967). Semiconductor transducers using transverse and shear piezoresistance. Proceedings of the 22nd ISA Conference, No. P4-1 PHYMMID-67, September 1967.
188. Tanigawa, H., et al. (1985). MOS integrated silicon pressure sensor. IEEE Transactions on Electron Devices, ED-32(7), 1191–1195.
189. Petersen, K., et al. (1998). Silicon fusion bonding for pressure sensors. Rec. of the IEEE Solidstate sensor and actuator workshop (pp. 144–147).
190. Peng, K. H., et al. (2004). The temperature compensation of the silicon piezo-resistive pressure sensor using the half-bridge technique. In Tanner DM, Ramesham R (Eds.) Reliability, testing, and characterization of MEMS/MOEMS III, Proc. SPIE. Vol. 5343.
191. Wolthuis, R., et al. (1991). Development of medical pressure and temperature sensors employing optical spectral modulation. IEEE Transactions on Bio-medical Engineering, 38 (10), 974–981.
192. Halg, B. (1991). A silicon pressure sensor with an interferometric optical readout. In: Transducers’91. International conference on solid-state sensors and actuators. Digest of technical papers (pp. 682–684). IEEE.
193. Vaughan, J. M. (1989). The Fabry-Perot interferometers. Bristol: Adam Hilger.
194. Saaski, E.W., et al. (1989). A fiber optic sensing system based on spectral modulation. Paper #86-2803, #ISA.
195. Fraden, J. (2009). Detector of low levels of gas pressure and flow. U.S. Patent No. 7,490,512. February 17, 2009.
196. von Pirani, M. (1906). Selbszeigendes vakuum-mefsinstrument. Verhandlungen der Deutschen Physikalischen Gesellschaft, 1906, 686–694.
197. Von Smoluchovski, M. (1911). Zur theorie der warmteleitung in verdunnten gasen und der dabei auftretenden druckkrafte. Annalen der Physik, 35, 983–1004.
198. Leck, J. H. (1964). Pressure measurement in vacuum systems (2nd ed.). London: Chapman & Hall.
199. Bayard, R. T., et al. (1950). Extension of the low pressure range of the ionization gauge. Review of Scientific Instruments, 21, 571. American Institute of Physics.
200. Fremery, J. K. (1946). Vacuum, 32, 685.
201. Looney, J. P., et al. (1994). PC-based spinning rotor gage controller. Review of Scientific Instruments, 65(9), 3012.
202. Zhang Y., et al. (2001). An ultra-sensitive high-vacuum absolute capacitive pressure sensor. In: 14th IEEE international conference on micro electro mechanical systems. (Cat. No. 01CH37090). Technical Digest, pp: 166–169.
203. Benedict, R. P. (1984). Fundamentals of temperature, pressure, and flow measurements (3rd ed.). New York, NY: John Wiley & Sons.
204. Cho, S. T., et al. (1991). A high performance microflowmeter with built-in self test. In: Transducers’91. International conference on solid-state sensors and actuators. Digest of technical papers (pp 400–403), IEEE.
205. Bruun, H. H. (1995). Hot-wire anemometry. Principles and signal analysis. Oxford: Oxford Science.
206. King, L. V. (1914). On the convention of heat from small cylinders in a stream of fluid. Philosophical Transactions of the Royal Society A, A214, 373.
207. Collis, D. C., et al. (1959). Two-dimensional convection from heated wires at low Reynolds’ numbers. Journal of Fluid Mechanics, 6, 357.
208. Fraden, J., et al. (2007). Clogging detector for air filter. U.S. Patent No. 7178410, February 20, 2007.
209. Fraden, J. (2009). Detector of low levels of gas pressure and flow. U.S. patent No. 7490512, February 17, 2009.
210. Fraden, J. (2012). Measuring small air pressure gradients by a flow sensor. IEEE Instrumentation and Measurement Magazine, 15(5), 35–40.
211. Van Herwaarden, A. W., et al. (1986). Thermal sensors based on the Seebeck effect. Sensors and Actuators, 10, 321–346.
212. Nan-Fu, C., et al. (2005). Low power consumption design of micro-machined thermal sensor for portable spirometer. Tamkang Journal of Science and Engineering, 8(3), 225–230.
213. Wachutka, G., et al. (1991). Analytical 2D-model of CMOS micromachined gas flow sensors. In: Transducers’91. International conference on solid-state sensors and actuators. Digest of technical papers. #IEEE.
214. Esashi, M. (1991). Micro flow sensor and integrated magnetic oxygen sensor using it. In: Transducers’91. International conference on solid-state sensors and actuators. Digest of technical papers. IEEE.
215. Gessner, U. (1969). The performance of the ultrasonic flowmeter in complex velocity profiles. IEEE Transactions on Bio-medical Engineering, MBE-16, 139–142.
216. Yoder, J. (2000). Coriolis effect mass flowmeters. In J. Webster (Ed.), Mechanical variables measurement. Boca Raton, FL: CRC Press LLC.
217. Philip-Chandy, R., et al. (2000). Drag force flowmeters. In J. Webster (Ed.), Mechanical variables measurement. Boca, Raton, FL: CRC Press LLC.
218. Clarke, T. (1986). Design and operation of target flowmeters. Encyclopedia of fluid mechanics (Vol. 1). Houston, TX: Gulf Publishing Company.
219. Wang, Y. H., et al. (2007). A MEMS-based air flow sensor with a free-standing microcantilever structure. Sensors, 7, 2389–2401.
220. Ma, R. H., et al. (2009). A MEMS-based flow rate and flow direction sensing platform with integrated temperature compensation scheme. Sensors, 9, 5460–5476.
221. Dobrzanski, J., et al. (1977). Ionization smoke detector and alarm system. U.S. Patent No. 4037206, July 19, 1977.
222. Steele, D. F., et al. (1975). Optical smoke detector. U.S. Patent No. 3863076, January 28, 1975.
223. Hohm, D., et al. (1989). A subminiature condenser microphone with silicon nitrite membrane and silicon back plate. The Journal of the Acoustical Society of America, 85, 476–480.
224. Bergqvist, J., et al. (1990). A new condenser microphone in silicon. Sensors and Actuators, A21–A23, 123–125.
225. Sprenkels, A. J., et al. (1989). Development of an electret microphone in silicon. Sensors and Actuators, 17(3&4), 509–512.
226. van der Donk, A. G. H., et al. (1991). Preliminary results of a silicon condenser microphone with internal feedback. In: Transducers’91. International Conference on Solid-State Sensors and Actuators. Digest of technical papers (pp. 262–265). IEEE.
227. Wong, S. K., et al. (Eds.). (1995). AIP handbook of condenser microphones. New York: AIP Press.
228. Nishikawa, S., et al. (1928). Proc. Imp. Acad. Tokyo (Vol. 4, p. 290).
229. Sessler, G. M. (Ed.). (1980). Electrets. Berlin: Springer.
230. Sessler, G. M. (1963). Electrostatic microphones with electret foil. The Journal of the Acoustical Society of America, 35(9), 1354–1357.
231. Griese, H. J. (1977). Paper Q29. Proc. 9th Int. Conf. Acoust., Madrid.
232. Bicen, B. (2010). Micromachined diffraction based optical microphones and intensity probes with electrostatic force feedback. Ph.D. Dissertation, Georgia Institute of Technology. School of Mech. Eng.
233. Hellbaum, R. F., et al. (1991). An experimental fiber optic microphone for measurement of acoustic pressure levels in hostile environments. In Sensors Expo Proceedings. Peterborough: Helmers.
234. Piezo Film Sensors Technical Manual. (1999). Norristown, PA: Measurement Specialties. www.msiusa.com
235. Motamedi, M. E., et al. (1994). Acoustic sensors. In S. M. Sze (Ed.), Semiconductor sensors (pp. 97–151). New York: John Wiley & Sons.
236. Quinn, F. C. (1985). The most common problem of moisture/humidity measurement and control. In: Moisture and humidity. Proc. Of the 1985 Int. Symp. On Moisture and Humidity (pp. 1-5). ISA: Washington, DC.
237. Carter, E. F. (1966). Dictionary of inventions and discoveries. In F. Muller (Ed.), Crane. New York: Russak and Co.
238. Berry, F. A., (1945). Handbook of meteorology (p. 343). New York: McGraw-Hill Book Company.
239. Sashida, T., et al. (1985, April 15–18). An interchangeable humidity sensor for an industrial hygrometer. In: Moisture and humidity. Proc. Of the Intern. Symp. On Moisture and Humidity, Washington, DC.
240. Kang, U., et al. (2000). A high-speed capacitive humidity sensor with on-chip thermal reset. IEEE Transactions on Electron Devices, 47(4), 702–710.
241. Carr-Brion, K. (1986). Moisture sensors in process control. New York: Elsevier Applied Science Publishers.
242. Norton, H. N. (1989). Handbook of transducers. Englewood Cliffs, NJ: Prentice Hall.
243. Hilhorst, M. A. (2000). A pore water conductivity sensor. Soil Science Society of America Journal, 64, 1922–1925.
244. Harding, J. C. (1985, April 15–18). A chilled mirror dewpoint sensor/psychrometric transmitter for energy monitoring and control systems. In: Moisture and humidity. Proc. Of the Intern. Symp. On Moisture and Humidity, Washington, DC.
245. Actkcoz, S., et al. (2008). Use of polyethylene glycol coatings for optical fibre humidity sensing. Optical Review, 15(2), 84–90.
246. Somani, P. R., et al. (2001). Charge transfer complex-forming dyes incorporated in solid polymer electrolyte for optical humidity sensing. Sensors and Actuators B, 80, 141–148.
247. Porlier, C. (1991). Chilled piezoelectric hygrometer: Sensor interface design. In: Sensors Expo proceedings, 107B-7. Dublin, NH: Helmers Publishing.
248. Moghaddam, M., et al. (2010). A wireless soil moisture smart sensor web using physics-based optimal control: Concept and initial demonstrations. IEEE Journal of Selected Topics and Applied Earth Observations and Remote Sensing, 3(4), 522–535.
249. Hendrickx, J. M. H., et al. (2002). Indirect measurement of solute concentration: Nonintrusive electromagnetic induction. In J. H. Dane & G. C. Topp (Eds.), Methods of soil analysis. Part 4 (SSSA Book Ser. 5, pp. 1297–1306). Madison, WI: SSSA.
250. Spillman, W. B., (1991). Optical detectors. In U. Eric (Ed.), Fiber optic sensors (pp. 69–97). New York, NY: John Wiley & Sons.
251. Verdeyen, J. T. (1981). Laser electronics. Englewood Clifs, NJ: Prentice-Hall.
252. Golay, M. J. E. (1947). Theoretical consideration in heat and infra-red detection, with particular reference to the pneumatic detector. Review of Scientific Instruments, 18, 347.
253. Qian, D.-P., et al. (2013). Hardening and optimizing of the black gold thin film as the absorption layer for infrared detector. Optics and Photonics Journal, 3, 281–283.
254. V€olklein, A., et al. (1991). High-sensitivity radiation thermopiles made of films. Sensors and Actuators A, 29, 87–91.
255. Schieferdecker, J., et al. (1995). Infrared thermopile sensors with high sensitivity and very low temperature coefficient. Sensors and Actuators A, 46–47, 422–427.
256. Meixner, H., et al. (1986). Infrared sensors based on the pyroelectric polymer polyvinylidene fluoride (PVDF). Siemens Forsch-u Entwicl Ber Bd, 15(3), 105–114.
257. Fraden, J. (1992). Active far infrared detectors. In J. F. Schooley (Ed.), Temperature. Its measurement and control in science and industry (Vol. 6, pp. 831–836). College Park, MD: American Institute of Physics.
258. Fraden, J. (1989). Radiation thermometer and method for measuring temperature. U.S. Patent No. 4,854,730, August 8, 1989.
259. Fraden, J. (1990). Active infrared motion detector and method for detecting movement, U.S. Patent No. 4,896,039, January 23, 1990.
260. Astheimer, R. W. (1984). Thermistor infrared detectors. SPIE, 443, 95–109.
261. Shie, J.-S., et al. (1991) Fabrication of micro-bolometer on silicon substrate by anizotropic etching technique (pp. 627–630). In Transducers’91. International conference on solid-state sensors and actuators. Digest of technical papers, #IEEE, 1991.
262. Vogl, T. P., et al. (1962). Generalized theory of metal-film bolometers. Journal of the Optical Society of America, 52, 957–964.
263. Lentz, R. R., et al. (1989). Method and apparatus for measuring strong microwave electric field strengths. US Patent No. 4816634, 1989.
264. Evans, R. D. (1955). The atomic nucleus. New York, NY: McGraw-Hill.
265. Knoll, G. F. (1999). Radiation detection and measurement (3rd ed.). New York, NY: John Wiley and Sons.
266. The Elegant Universe. Teacher’s guide. Nova #pbs.org, 2012.
267. Fraden, J. et al. (2007). Ear temperature monitor and method of temperature measurement. U.S. Patent No. 7306565, 11 December 2007.
268. Benedict, R. P. (1984). Fundamentals of temperature, pressure, and flow measurements (3rd ed.). New York, NY: John Wiley & Sons.
269. Callendar, H. L. (1887). On the practical measurement of temperature. Philosophical Transactions. Royal Society of London, 178, 160.
270. Sapoff, M. (1999). Thermistor thermometers. In J. G. Webster (Ed.), The measurement, instrumentation and sensors handbook (pp. 3225–3241). Boca Raton, FL: CRC Press.
271. Fraden, J. (2000). A two-point calibration of negative temperature coefficient thermistors. Review of Scientific Instruments, 71(4), 1901–1905.
272. Steinhart, J. S., & Hart, S. R. (1968). Calibration curves for thermistors. Deep Sea Research, 15, 497.
273. Mangum, B. W. (1983). Triple point of succinonitrile and its use in the calibration of thermistor thermometers. Review of Scientific Instruments, 54(12), 1687.
274. Sapoff, M., et al. (1982). The exactness of Ät of resistance—temperature data. In J. E. Schooley (Ed.), Temperature Its measurement and control in science and industry (Vol. 5, p. 875). College Park, MD: American Institute of Physics.
275. Keystone Carbon Company. (1984). Keystone NTC and PTC thermistors. Catalogue # Keystone Carbon Company, St. Marys, PA.
276. Tosaki H et al. (1986) Thick film thermistor composition. U.S. Patent No. 4587040, 6 May 1986.
277. Zhiong J, et al. Thick film thermistors printed on low temperature co-fired ceramic tapes. University of Pensilvania. Retrieved from http://repository.upenn.edu/meam_papers/117/.
278. Villemant, C. M., et al. (1971). Thermistor. U.S. Patent No. 3,568,125, March 2, 1971.
279. Silver, E. H, et al. (2007). Method for making an epitaxial germanium temperature sensor. U.S. Patent No. 7232487, June 19, 2007.
280. Kozhukh, M. (1993). Low-temperature conduction in germanium with disorder caused by extended defects. Nuclear Instruments & Methods, A329, 453–466.
281. Kozhukh, M. (1993). Neutron doping of silicon in power reactors. Journal of Physics: Condensed Matter, 5, 2351–2376.
282. Sachse, H. B. (1975). Semiconducting temperature sensors and their applications. New York, NY: Wiley.
283. Timko, M. P. (1976). A two terminal IC temperature transducer. IEEE Journal of Solid-State Circuits, 11, 784–788.
284. Caldwell, F. R. (1962) Thermocouple materials. NBS monograph 40. National Bureau of Standards, 1 March 1962.
285. ASTM. (1993). Manual on the use of thermocouples in temperature measurement. ASTM manual series: MNL: 12-93 (4th ed.). Philadelphia, PA: ASTM.
286. Wickersheim, K. A., et al. (1987). Fluoroptic thermometry. Medical Electronics, February, 84–91.
287. Fernicola, V. C., et al. (2000). Investigations on exponential lifetime measurements for fluorescence thermometry. Review of Scientific Instruments, 71(7), 2938–2943.
288. Schultheis, L., et al. (1988). Fiber-optic temperature sensing with ultrathin silicon etalons. Optics Letters, 13(9), 782–784.
289. Wolthuis, R., et al. (1991). Development of medical pressure and temperature sensors employing optical spectral modulation. IEEE Transactions on Biomedical Engineering, 38 (10), 974–981.
290. Beheim, G., et al. (1990). A sputtered thin film fiber optic temperature sensor. Sensors, January, 37–43.
291. Weng, W., et al. (2014). Nano-Kelvin thermometry and temperature control: Beyond the thermal noise limit. PRL, 112, 160801.
292. Hao, T., et al. (1990). An optical fiber temperature sensor using a thermochromic solution. Sensors and Actuators A, 24, 213–216.
293. Kersey, A. D., et al. (1997). Fiber grating sensors. Journal of Lightwave Technology, 15, 1442–1463.
294. Cazo, R. M., et al. Fiber Bragg Grating temperature sensor. Photonics Div., IEAv, Sa˜o Jose´ dos Campos-SP-Brazil, e-mail:carmi@ieav.cta.br.
295. Williams, J. (1990). Some techniques for direct digitization of transducer outputs, AN7, Linear Technology application handbook. Milpitas, CA: Linear Technology.
296. Venema, A., et al. (1990). Acoustic-wave physical-electronic systems for sensors. Fortschritte der Acustik der 16. Deutsche Arbeitsgemeinschaft f€ur Akustik (pp. 1155–1158).
297. Vellekoop, M. J., et al. (1990). All-silicon plate wave oscillator system for sensor applications. New York, NY: Proceedings of the IEEE Ultrasonic Symposium.
298. Smith, W. L., et al. (1963). Quartz crystal thermometer for measuring temperature deviation in the 10 range. Review of Scientific Instruments, 4, 268-270
299. Hammond, D. L., et al. (1962). Linear quartz thermometer. Instrumentation and Control Systems, 38, 115.
300. Ziegler, H. (1984). A low-cost digital sensor system. Sensors and Actuators, 5, 169–178.
301. Ueda T, et al. (1986). Temperature sensor utilizing quatz tuning fork resonator (pp. 224–229). In Proceedings of the 40th annuals of frequency control symposium, Philadelphia, PA, 1986.
302. EerNisse E. P., et al. (1986). A resonator temperature transducer with no activity dips. (pp. 216–223). In Proceedings of the 40th annuals of frequency control symposium, Philadelphia, PA, 1986.
303. Jacoby, M. (2009). Keepers of the gate. Chemical and Engineering News, 87(22), 10–13.
304. Zheng, O., et al. (2009). Handheld miniature ion trap mass spectrometers. Analytical Chemistry, 81(7), 2421–2425.
305. Nagle, H. T., et al. (1998). The how and why of electronic noses. IEEE Spectrum, 35, 22–34.
306. Amoore, J. E., et al. (1964). The stereochemical theory of odor. Scientific American, 210, 42–99.
307. Ho, C. K., et al. (2002). In-situ chemiresistor sensor package for real-time detection of volatile organic compounds in soil and groundwater. Sensors, 2, 23–34.
308. Dewa, A. S., et al. (1994). Biosensors. In S. M. Sze (Ed.), Semiconductor sensors (pp. 415–472). New York, NY: John Wiley & Sons.
309. Kim, T. (2009, February 16). Canary in the old growth. High Country News.
310. For a wealth of information on Mine Safety Gas Monitoring Equipment is the United States Department of Labor. Mine Safety & Health Administration (MSHA) website. Retrieved from http://www.msha.gov.
311. Clutton-Brock, J. (1995). Origins of the dog: domestication and early history. In J. Serpell (Ed.), The domestic dog, its evolution, behaviour and interactions with people (pp. 7–20). Cambridge: Cambridge University Press.
312. Gentry, S. J. (1988). Catalytic devices. In T. E. Edmonds (Ed.), Chemical sensors. New York, NY: Chapman and Hall.
313. Cobbold, R. S. C. (1974). Transducers for biomedical measurements. New York, NY: John Wiley & Sons. www.askiitians.com/iit-jee-chemistry/physical-chemistry/Kohlrausch-law.aspx
314. Tan, T. C., & Liu, C. C. (1991). Principles and fabrication materials of electrochemical sensors. In Kodansha Ltd (Ed.), Chemical sensor technology (Vol. 3). Tokyo: Kodansha Ltd.
315. Clark, L. C. (1956). Monitor and control of blood and tissue oxygen tension. Transactions – American Society for Artificial Internal Organs, 2(p), 41–46.
316. Madou, M. J., et al. (1989). Chemical sensing with solid state devices. Waltham, MA: Academic.
317. Wolfrum, E. J., et al. (2006). Metal oxide sensor arrays for the detection, differentiation, and quantification of volatile organic compounds at sub-parts-per-million concentration levels. Sensors and Actuators B, 115, 322–329.
318. Persaud, K., et al. (1982). Analysis of discrimination mechanisms in the mammalian olfactory system using a model nose. Nature, 299, 352–355.
319. Sberveglieri, G. (1992). Gas sensors: principles, operations, and developments (p. 8, 148, 282, 346–408). Boston, MA: Kluwer.
320. Blum, L. J. (1997). Bio- and chemi-luminescent sensors (pp. 6–32). River Edge, NJ: World Scientific Publishing Co. Pte. Ltd.
321. Sberveglieri, G. (1995). Recent developments in semiconducting thin-film gas sensors. Sensors and Actuators B, 23, 103–109.
322. Demarne, V., et al. (1992). Thin film semiconducting metal oxide gas sensors. In G. Sberveglieri (Ed.), Gas sensors (pp. 89–116). Dordrecht: Kluwer.
323. Malyshe, V., et al. (1992). Gas sensitivity of SnO2 and ZnO thin-film resistive sensors to hydrocarbons, carbon monoxide, and hydrogen. Sensors and Actuators B, 10, 11–14.
324. Hoefer, U., et al. (1994). CO and CO2 thin-film SnO2 gas sensors on Si substrates. Sensors and Actuators B, 22, 115–119.
325. Demarne, V., et al. (1988). An integrated low-power thin-film CO gas sensors on silicon. Sensors and Actuators B, 13, 301–313.
326. Barsan, N., et al. (1995). The temperature dependence of the response of SnO2-based gas sensing layers to O2, CH4, and CO. Sensors and Actuators B, 26–27, 45–48.
327. Van Geloven, P., et al. (1989). Tin(IV) oxide gas sensors: thick-film versus metallo-organic based sensors. Sensors and Actuators B, 17, 361–368.
328. Schierbaum, K. D., et al. (1993). Specific palladium and platinum doping for SnO2-based thin film sensor arrays. Sensors and Actuators B, 13–14, 143–147.
329. Sulz, G., et al. (1993). Ni, In, and Sb implanted Pt and V catalyzed thin-film SnO2 gas sensors. Sensors and Actuators B, 16, 390–395.
330. Tournier, G., et al. (1995). Selective detection of CO and CH4 with gas sensors using SnO2 doped with palladium. Sensors and Actuators B, 26–27, 24–28.
331. Huck, R., et al. (1993). Spillover effects in the detection of H2 and CH4 by sputtered SnO2 films with Pd and PdO deposits. Sensors and Actuators B, 17, 355–359.
332. Saji, K., et al. (1983). Characteristics of TiO2 oxygen sensor in nonequilibrium gas mixtures. In T. Seiyama, K. Fueki, J. Shiokawa, & S. Suzuki (Eds.), Chemical sensors, proceedings of the international meeting on chemical sensors, Fukuoka Japan (pp. 171–176). Tokyo: Elsevier.
333. Mumuera, G., et al. (1989). Mechanism of hydrogen gas-sensing at low temperatures using Rh/TiO2 systems. Sensors and Actuators B, 18, 337–348.
334. Egashira, M., et al. (1989). Gas-sensing characteristics of Li + -doped and undoped ZnO whiskers. Sensors and Actuators B, 18, 349–360.
335. Grate, J. W., et al. (1990). Role of selective sorption in chemiresistor sensors for organophosphorus detection. Analytical Chemistry, 62(18), 1927–1934.
336. Eastman, M. P., et al. (1999). Application of the solubility parameter concept to the design of chemiresistor arrays. Journal of the Electrochemical Society, 146, 3907–3913. doi:10.1149/1.1392571.
337. Liu, Q., et al. (2014). Nanomaterials for analysis and monitoring of emerging chemical pollutants. Trends in Analytical Chemistry, 58, 10–22.
338. Sharma, S., et al. (2014). MWCNT-conducting polymer composite based ammonia gas sensors: A new approach for complete recovery process. Sensors and Actuators B: Chemical, 194, 213–219.
339. Benz, M., et al. (2012). Freestanding chemiresistive polymer composite ribbons as high-flux sensors. Journal of Applied Polymer Science, 125(5), 3986–3995.
340. Garg, N., et al. (2010). Robust gold nanoparticles stabilized by trithiol for application in chemiresistive sensors. Nanotechnology, 21, 405501.
341. Kwon, O., & Seok, O. (2012). Seok multidimensional conducting polymer nanotubes for ultrasensitive chemical nerve agent sensing. Nano Letters, 12(6), 2797–2802.
342. Penza, M., et al. (2010). Metalloporphyrins-modified carbon nanotubes networked filmsbased chemical sensors for enhanced gas sensitivity. Sensors and Actuators B: Chemical, 144 (2;17), 387–394.
343. Hierlemann, A., et al. (2000). Application-specific sensor systems based on cmos chemical microsensors. Sensors and Actuators B: Chemical, 70, 2–11.
344. Endres, H.-E., et al. (1999). A capacitive CO2 sensor system with suppression of the humidity interference. Sensors and Actuators B: Chemical, 57, 83–87.
345. Patel, S. V., et al. (2003). Chemicapacitive microsensors for volatile organic compound detection. Sensors and Actuators B, 96(3), 541–553.
346. Fotis, E. (2002). A new ammonia detector based on thin film polymer technology. Sensors, 19 (5), 73–75.
347. Mlsna, T. E., et al. (2006). Chemicapacitive microsensors for chemical warfare agent and toxic industrial chemical detection. Sensors and Actuators B: Chemical, 116(1-2), 192–201.
348. The Multi-User MEMS Process (MUMPs) from MEMSCAP, Inc. (Durham, NC) is used to manufacture the these chemicapacitive sensor chips.
349. Britton, C. L., et al. (2000). Multiple-input microcantilever sensors. Ultramicroscopy, 82, 17–21.
350. Baselt, D. R., et al. (2003). Design and performance of a microcantilever-based hydrogen sensor. Sensors and Actuators B: Chemical, 88(2), 120–131.
351. Polk, B. J. (2002). Chem FET arrays for chemical sensing microsystems. IEEE, 2002, 732–735.
352. Wilson, D. M., et al. (2001). Chemical sensors for portable, handheld field instruments. IEEE Sensor Journal, 1(4), 256–274.
353. Janata, J. (1989). Principles of chemical sensors, Chapter 4. New York, NY: Plenum.
354. Kharitonov, A. B., et al. (2000). Enzyme monolayer-functionalized field-effect transistors for biosensor applications. Sensors and Actuators, B, 70(1–3), 222–231.
355. Ballantine, D. S., et al. (1997). Acoustic wave sensors: Theory, design and physicochemical applications. Boston, MA: Academic.
356. Ristic, V. M. (1983). Principles of acoustic devices. New York: Wiley and Sons.
357. Nieuwenhuizen, M. S., et al. (1986). Transduction mechanism in SAW gas sensors. Electronics Letters, 22, 184–185.
358. Wenzel, S. W., et al. (1989). Analytic comparison of the sensitivities of bulk-surface-, and flextural plate-mode ultrasonic gravimetric sensors. Applied Physics Letters, 54, 1976–1978.
359. Binnig, G., et al. (1986). Atomic force microscope. Physical Review Letters, 56, 930–933.
360. Battiston, F. M., et al. (2001). A chemical sensor based on a microfabricated cantilever array with simultaneous resonance-frequency and bending readout. Sensors and Actuators B: Chemical, 77, 122–131.
361. Sharma, S., et al. (2012). Review article: a new approach to gas sensing with nanotechnology. Philosophical Transactions of the Royal Society A, Mathematical, Physical and Engineering Sciences, 370(1967), 2448-24-73.
362. Hansen, K. M., et al. (2001). Cantilever-based optical deflection assay for discrimination of DNA single-nucleotide mismatches. Analytical Chemistry, 73, 1567–1571.
363. Baselt, D. R., et al. (2001). A biosensor based on magnetoresistance technology. Biosensors & Bioelectronics, 13, 731–739.
364. Betts, T. A., et al. (2000). Selectivity of chemical sensors based on micro-cantilevers coated with thin polymer films. Analytica Chimica Acta, 422, 89–99.
365. Senesac, L. R., et al. (2009). Micro-differential thermal analysis detection of adsorbed explosive molecules using microfabricated bridges. Review of Scientific Instruments, 80, 035102.
366. Thundat, T., et al. (1995). Detection of mercury-vapor using resonating microcantilevers. Applied Physics Letters, 66(13), 1695–1697.
367. Thundat, T., et al. (1995). Vapor detection using resonating microcantilevers. Analytical Chemistry, 67(3), 519–521.
368. Pinnaduwage, L. A., et al. (2004). Detection of trinitrotoluene via deflagration on a microcantilever. Journal of Applied Physics, 95, 5871–5875.
369. Datskos, P. G., et al. (1996). Remote infrared radiation detection using piezoresistive microcantilevers. Applied Physics Letters, 69(20), 2986–2988.
370. Creaser, C., et al. (2004). Ion mobility spectrometry: a review. Part 1. Structural analysis by mobility measurement. The Analyst, 129, 984–994.
371. Wu, C., et al. (2000). Secondary electrospray ionization ion mobility spectrometry/mass spectrometry of illicit drugs. Analytical Chemistry, 72(2), 396–403.
372. Tam, M., et al. (2004). Secondary electrospray ionization-ion mobility spectrometry for explosive vapor detection. Analytical Chemistry, 76(10), 2741–2747.
373. Rhykerd, C. L., et al. (1999). Guide for the selection of commercial explosives detection systems for law enforcement applications. NIJ Guide 100-99, NCJ 178913. Retrieved September, 1999, from www.ojp.usdoj.gov/nij/pubs-sum/178913.htm.
374. Kriz, D., et al. (1997). Molecular imprinting: New possibilities for sensor technology. Analytical Chemistry, 69(11), 345A–349A. doi:10.1021/ac971657e.
375. Dybko, A., et al. (2000). Fiber optic chemical sensors. Retrieved from www.ch.pw.edu.pl/~dybko/csrg/fiber/operating.html.
376. Seiler, K., et al. (1992). Principles and mechanisms of ion-selective optodes. Sensors and Actuators B, 6, 295–298.
377. Walt, D. R. (2000). Molecular biology: Bead based fiber-optic arrays. Science, 287(5452), 451.
378. Chen, H. X., et al. (2010). Colorimetric optical pH sensor production using a dual-color system. Sensors and Actuators B: Chemical, 146(1), 278–282.
379. Kreno, L. E., et al. (2011). Metal–organic framework materials as chemical sensors. Chemical Reviews, 112(2), 1105–1125.
380. Xu, Z., et al. (2010). Sensors for the optical detection of cyanide ion. Chemical Society Reviews, 39(1), 127–137.
381. Vilela, D., et al. (2012). Sensing colorimetric approaches based on gold and silver nanoparticles aggregation: Chemical creativity behind the assay. A review. Analytica Chimica Acta, 751, 24–43.
382. Miranda, O. R., et al. (2011). Colorimetric bacteria sensing using a supramolecular enzyme– nanoparticle biosensor. Journal of the American Chemical Society, 133(25), 9650–9653.
383. Mader, H. S., et al. (2010). Optical ammonia sensor based on upconverting luminescent nanoparticles. Analytical Chemistry, 82(12), 5002–5004.
384. Feng, L., et al. (2010). A simple and highly sensitive colorimetric detection method for gaseous formaldehyde. Journal of the American Chemical Society, 132(12), 4046–4047.
385. Burgess, I. B., et al. (2011). Wetting in color: Colorimetric differentiation of organic liquids with high selectivity. ACS Nano, 6(2), 1427–1437.
386. Quang, D. T., et al. (2010). Fluoro-and chromogenic chemodosimeters for heavy metal ion detection in solution and biospecimens. Chemical Reviews, 110(10), 6280–6301.http://www.drierite.com/
387. Janzen, M. C., et al. (2006). Colorimetric sensor arrays for volatile organic compounds. Analytical Chemistry, 78, 3591–3600.
388. Doran, J. W., et al. (1996). Field and laboratory tests of soil respiration. Methods for Assessing Soil Quality, 1996, 231–245.
389. Dra¨ger Safety AG & Co. KGaA. (2008). Dr€ager-Tubes & CMS-handbook (15th ed., p. 114). Lu¨beck: Dra¨ger Safety AG & Co. KGaA.
390. Costello, B. P., et al. (2008). A sensor system for monitoring the simple gases hydrogen, carbon monoxide, hydrogen sulfide, ammonia and ethanol in exhaled breath. Journal of Breath Research, 2(3), 037011.
391. R&D Systems, Inc. ELISA development guide. Retrieved January 12, 2015, from http://www. rndsystems.com/pdf/edbapril02.pdf.
392. Jiao, Y., et al. (2012). Preparation and evaluation of recombinant severe fever with thrombocytopenia syndrome virus nucleocapsid protein for detection of total antibodies in human and animal sera by double-antigen sandwich enzyme-linked immunosorbent assay. Journal of Clinical Microbiology, 50(2), 372–377. Pesticides and companies providing ELISA systems are listed at: http://www.aoac.org/testkits/TKDATA7.HTM.
393. Rissin, D. M., et al. (2010). Single-molecule enzyme-linked immunosorbent assay detects serum proteins at subfemtomolar concentrations. Nature Biotechnology, 28(6), 595–599.
394. Immunoassay methods of acetochlor: Detection Review of existing immunoassay kits for screening of acetochlor and other acetanilides in water. Acetochlor Registration Partnership. Retrieved March, 1995, from http://www.epa.gov/oppefed1/aceto/elisa.htm.
395. Gottuk, D. T., et al. (1999). Identification of fire signatures for shipboard multi-criteria fire detection systems (pp. 48–87). Washington, DC: NRL/MR/6180-99-8386, Naval Research Laboratory.
396. Einax, J. W., et al. (1997). Chemometrics in environmental analysis (pp. 2–75). VCH: Weinheim.
397. Prasad, L., et al. (1994). Fault-tolerant sensor integration using multiresolution decomposition. Physical Review E, 49(4), 3452–3461.
398. Raman, B., et al. (2009). Designing and optimizing microsensor arrays for recognizing chemical hazards in complex environments. Sensors and Actuators B, 137, 617–629.
399. Raman, B., et al. (2008). Bioinspired methodology for artificial olfaction. Analytical Chemistry, 80, 8364.
400. Meier, D. C., et al. (2009). Detecting chemical hazards with temperature-programmed microsensors: Overcoming complex analytical problems with multidimensional databases. Annual Review of Analytical Chemistry, 2, 463–484.
401. Bushdid, C., et al. (2014). Humans can discriminate more than 1 trillion olfactory stimuli. Science, 343, 1370–1372.
402. Cometto-Muniz, J. E., et al. (1990). Thresholds for odor and nasal pungency. Physiology and Behaviour, 48, 719–725.
403. Wang, P., et al. (2007). Olfactory and taste cell sensor and its applications in biomedicine. Sensors and Actuators A, 139, 131–138.
404. Edmonds, T. E. (Ed.). (1988). Chemical sensors. New York, NY: Blackie and Son Ltd.
405. Wilson, D. (2014). Interference and selectivity in portable chemical sensors (Chapter 54). In J. G. Webster & H. Eren (Eds.), Measurement, instrumentation and sensors handbook. Boca Raton, FL: CRC Press.
406. Burl, M. C., et al. (2001). Assessing the ability to predict human percepts of odor quality from the detector responses of a conducting polymer composite-based electronic nose. Sensors and Actuators B, 72, 149–159.
407. Jones, A. W. (1976). Precision, accuracy and relevance of breath alcohol measurements. Modern Problems of Pharmacopsychiatry, 11, 65–78.
408. Jones, E., et al. (1989). Hydrogen sulfide sensor. U.S. Patent No. 4822465.
409. Rabinovich, M., et al. (2008). Transient dynamics for neural processing. Science, 321, 48–50.
410. Muezzinoglu, M. K., et al. (2009). Chemosensor-driven artificial antennal lobe transient dynamics enable fast recognition and working memory. Neural Computation, 21, 1018–1103.
411. RAE Systems Inc., Theory and operation of NDIR Sensors, Technical Note TN-169. rev 1 wh.04-02.
412. Middelhoek, S., et al. (1985). Smart sensors: when and where? Sensors and actuators, 8(1), 39–48. Elsevier Sequoya.
413. Obermier, E., et al. (1986). Characteristics of polysilicon layers and their application in sensors. In: IEEE solid-state sensors workshop.
414. Honeychurch, K. C. (Ed.). (2014). Nanosensors for chemical and biological applications. Sawston: Woodhead Publishing.
415. Frijlink, P. M., et al. (1991). Layer uniformity in a multiwafer MOVPRE reactor for III-V compounds. Journal of of Crystal Growth, 107, 167–174.
416. Ratner, M., et al. (2003). Nanotechnology. A gentle introduction to the next big idea. New York City, NY: Pearson Education, Inc.
417. Popov, V. N. (2004). Carbon nanotubes: properties and application. Materials Science and Engineering, R43, 61–102.
418. Varshney, K. (2014). Carbon nanotubes: a review on synthesis, properties and applications. International Journal of Engineering Research and General Science, 2(4), 660–667.
419. Rancourt, J. D. (1996). Optical thin films – User’s handbook. New York, NY: McGraw-Hill.
420. Gad-El-Hak, M. (Ed.). (2006). MEMS – Introduction and fundamentals (2nd ed.). Boca Raton, FL: CRC Press.
421. Lang, H. P., et al. (1999). An artificial nose based on a micromechanical cantilever array. Analytica Chimica Acta (Elsevier), 393, 59–65.