Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly

Journal of Micromechanics and Microengineering

Volumn 21, Issue 9, 2011, Pages

  Chang, Bo ^a   Routa, Iiris ^a   Sariola, Veikko ^a   Zhou, Quan ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

[No Author keywords available]

Indexed keywords

DROPLET VOLUME; HYDROPHOBIC SUBSTRATE; IN-DEPTH STUDY; KEY PARAMETERS; SEGMENTED STRUCTURE; SELF ALIGNMENT; SELF-ALIGNMENT TECHNIQUES; SURFACE FUNCTIONALITIES; THEORETICAL MODELS; WATER DROPLETS;

ALIGNMENT; CRYPTOGRAPHY; DIES; DROPS; EXPERIMENTS;

RADIO FREQUENCY IDENTIFICATION (RFID);

EID: 80052254281     PISSN: 09601317     EISSN: 13616439     Source Type: Journal    
DOI: 10.1088/0960-1317/21/9/095024     Document Type: Article

References (36)

1. Assembleon Pick and Place equipment 2011 http://www.assembleon.com/smt- equipment/smt-equipment/ - ref-separator -
2. Yeh H and Smith J 1994 Fluidic self-assembly for the integration of GaAs light-emitting diodes on Si substrates IEEE Photonics Technol. L 6 706-8
3. Soga I, Hayashi S, Ohno Y, Kishimoto S, Maezawa K and Mizutani T 2005 Direct integration of GaAs HEMTs on AlN ceramic substrates using fluidic self-assembly IEEE Electron. Lett. 41 1275-6
4. Saeedi E, Kim S and Parviz A B 2008 Self-assembled crystalline semiconductor optoelectronics on glass and plastic J. Micromech. Microeng. 18 075019
5. Fang J and Böhringer K F 2006 Parallel micro component-to-substrate assembly with controlled poses and high surface coverage J. Micromech. Microeng. 16 721-30
6. Fang J and Böhringer K F 2006 Wafer-level packaging based on uniquely orienting self-assembly (the DUO-SPASS processes) J. Microelectromech. Syst. 15 531-40 (Pubitemid 43891348)
7. Ong Y Y, Lim Y L, Yan L L, Vempati S, Liao E B, Kripesh V and Yoon S U 2007 Self-Assembly of Components Using Shape Matching Electronics Packaging Technology Conf. pp 826-9
8. Ong Y Y, Lim Y L, Yan L L, Liao E B and Kripesh V 2006 Dry self-assembly and gang bonding of microcomponents from silicon carrier to substrate wafer 31st Int. Conf. on Electronics Manufacturing Technology pp 486-91
9. Park S and Böhringer K F 2008 A fully dry self-assembly process with proper in-plane orientation 21st Int. Conf. on Micro Electro Mechanical Systems pp 1077-80
10. Knuesel R J and Jacobs H O 2010 Self-assembly of microscopic chiplets at a liquid-liquid-solid interface forming a flexible segmented monocrystalline solar cell Proc. Natl Acad. Sci. USA 107 993-8
11. Srinivasan U, Liepmann D and Howe R T 2001 Microstructure to substrate self-assembly using capillary forces J. Microelectromech. Syst. 10 17-24 (Pubitemid 32287836)
12. Chang B, Sariola V, Jääskeläinen M and Zhou Q 2011 Self-alignment in the stacking of microchips with mist-induced water droplets J. Micromech. Microeng. 21 015016
13. Chang B, Sariola V, Aura S, Ras R H A, Klonner M, Lipsanen H and Zhou Q 2011 Capillary-driven self-assembly of microchips on oleophilic/oleophobic patterned surface using adhesive droplet in ambient air Appl. Phys. Lett. 99 034104
14. Fonstad C J 2002 Magnetically-assisted statistical assembly - a new heterogeneous integration technique MIT Technical Report
15. Böhringer K F, Goldberg K, Cohn M, Howe R T and Pisano A 1998 Parallel microassembly with electrostatic force fields Proc. Int. Conf. on Robotics and Automation vol 2 pp 1204-11
16. Chapuis Y A, Debray A, Jalabert L and Fujita H 2009 Alternative approach in 3D MEMS-IC integration using fluidic self-assembly techniques J. Micromech. Microeng. 19 105002
17. Zheng W and Jacobs H O 2004 Shape-and-solder-directed self-assembly to package semiconductor device segments Appl. Phys. Lett. 85 3635-7
18. Liu M, Lau W and Yang J 2007 On-demand multi-batch self-assembly of hybrid MEMS by patterning solders of different melting points J. Micromech. Microeng. 17 2163-8 (Pubitemid 350037293)
19. Scott K L, Hirano T, Yang H, Singh H, Howe R T and Niknejad A M 2004 High-performance inductors using capillary based fluidic self-assembly J. Microelectromech. Syst. 13 300-9
20. Mastrangeli M, Ruythooren W, Celis J and Van Hoof C 2011 Challenges for capillary self-assembly of microsystems IEEE Trans. Compon. Packag. Manuf. Technol. 1 133-49
21. Sariola V, Jääskeläinen M and Zhou Q 2010 Hybrid microassembly combining robotics and water droplet self-alignment IEEE Trans. Robot. 26 965-77
22. Tsai C G, Hsieh C M and Yeh J A 2007 Self-alignment of microchips using surface tension and solid edge Sensors Actuators A 139 343-9 (Pubitemid 47314216)
23. Lin C, Tseng F and Chieng C-C 2008 Studies on size and lubricant effects for fluidic self-assembly of microparts on patterned substrate using capillary effect J. Electron. Packag. 130 0210051-9
24. Sato K, Ito K, Hata S and Shimokohbe 2003 A. Self-alignment of microparts using liquid surface tension - behavior of micropart and alignment characteristics Precis. Eng. 27 42-50
25. Lin C, Tseng F-G and Chieng C-C 2009 Orientation-specific fluidic self-assembly process based on a capillary effect J. Micromech. Microeng. 19 115020
26. Albut A, Zhou Q, Corral C D, Corrala and Koivo H N 2003 Development of a flexible force-controlled piezo-bimorph microgripping system Proc. 2nd VDE World Microtechnologies Congress pp 507-12
27. Brakke K 1992 The Surface Evolver Exp. Math. 1 141-65
28. Mastrangeli M, Ruythooren W, Van Hoof C and Celis J P 2009 Conformal dip-coating of patterned surfaces for capillary die-to-substrate self-assembly J. Micromech. Microeng. 19 045015
29. Stauth S A and Parviz B A 2006 Modeling of fluidic self-assembly for integration of silicon components on plastic Proc. IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS) p 1627769
30. Wang D-A and Liao B 2010 Shaking assisted self-assembly of rectangular-shaped parts J. Mater. Process. Technol. 210 343-50
31. Dalin J, Wilde J, Zulfiqar A, Lazarou P, Synodinos A and Aspragathos N 2010 Electrostatic attraction and surface-tension-driven forces for accurate self-assembly of microparts Microelectron. Eng. 87 159-62
32. Mastrangeli M, Valsamis J -B, Van Hoof C, Celis J P and Lambert P 2010 Lateral capillary forces of cylindrical fluid menisci: a comprehensive quasi-static study J. Micromech. Microeng. 20 075041
33. Böhringer K F, Srinivasan U and Howe R T 2001 Modeling of capillary forces and binding sites for fluidic self-assembly Proc. IEEE Micro Electro Mechanical Systems (MEMS) pp 369-74 (Pubitemid 32470826)
34. Chan Y C, Tu P L and Hung K C 2001 Study of the self-alignment of no-flow underfill for micro-BGA assembly Microelectron. Reliab. 41 1867-75 (Pubitemid 32934873)
35. Liang S-H, Xiong X and Böhringer K F 2004 Towards optimal designs for self-alignment in surface tension driven micro-assembly Proc. IEEE Conf. Micro Electro Mech. pp 9-12
36. Goldberg D E 1989 Genetic Algorithms in Search, Optimization and Machine Learning (Reading, MA: Addison-Wesley)