Multi-criteria Decision Analysis for Supporting the Selection of Engineering Materials in Product Design: Second Edition

Multi-criteria Decision Analysis for Supporting the Selection of Engineering Materials in Product Design: Second Edition

Volumn , Issue , 2016, Pages 1-238

  Jahan, Ali ^a   Edwards, Kevin L ^b   Bahraminasab, Marjan ^c  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b Institution of Engineering Designers   (United Kingdom)

^c BUEIN ZAHRA TECHNICAL UNIVERSITY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

DECISION MAKING; DESIGN OF EXPERIMENTS; FINITE ELEMENT METHOD; PROBLEM SOLVING; QUALITY FUNCTION DEPLOYMENT; SEARCH ENGINES;

COMPLEX DESIGN PROBLEMS; COMPONENT CONFIGURATIONS; DECISION MAKING PROCESS; GEOMETRICAL OPTIMIZATION; MULTI-CRITERIA DECISION ANALYSIS; MULTI-CRITERIA DECISION MAKING; MULTIPLE OBJECTIVE DECISION-MAKING; QUALITY FUNCTION DEPLOYMENTS (QFD);

PRODUCT DESIGN;

EID: 84966781609     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2014-0-03347-3     Document Type: Book

References (457)

1. Albiñana J.C., Vila C. A framework for concurrent material and process selection during conceptual product design stages. Mater. Des. 2012, 41:433-446.
2. Allwood J.M., Ashby M.F., Gutowski T.G., Worrell E. Material efficiency: a white paper. Resour., Conserv. Recycl. 2011, 55:362-381.
3. Ashby M. Designing architectured materials. Scr. Mater. 2013, 68:4-7.
4. Ashby M., Shercliff H., Cebon D. Materials: Engineering, Science, Processing and Design 2013, Butterworth-Heinemann, Oxford.
5. Ashby M.F. Materials Selection in Mechanical Design 2005, Butterworth-Heinemann, Oxford.
6. Ashby M.F., Brechet Y.J.M., Cebon D., Salvo L. Selection strategies for materials and processes. Mater. Des. 2004, 25:51-67.
7. Asiedu Y., Gu P. Product life cycle cost analysis: state of the art review. Int. J. Prod. Res. 1998, 36:883-908.
8. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Hong T.S., Naghibi H. Material tailoring of the femoral component in a total knee replacement to reduce the problem of aseptic loosening. Mater. Des. 2013, 52:441-451.
9. Blanch R., Ferrer I., Garcia-Romeu M.L. A model to build manufacturing process chains during embodiment design phases. Int. J. Adv. Manuf. Technol. 2011, 59:421-432.
10. Brechet Y., Embury J.D. Architectured materials: expanding materials space. Scr. Mater. 2013, 68:1-3.
11. Brechet Y., Bassetti D., Landru D., Salvo L. Challenges in materials and process selection. Prog. Mater. Sci. 2001, 46:407-428.
12. Callister W.D., Rethwisch D.G. Materials Science and Engineering: An Introduction 2007, Wiley, New York, NY.
13. Chakladar N.D., Das R., Chakraborty S. A digraph-based expert system for nontraditional machining processes selection. Int. J. Adv. Manuf. Technol. 2009, 43:226-237.
14. Charles J.A., Crane F.A.A., Furness J.A.G. Selection and Use of Engineering Materials 1997, Butterworth-Heinemann, Oxford.
15. Chin K.S., Chan A., Yang J.B. Development of a fuzzy FMEA based product design system. Int. J. Adv. Manuf. Technol. 2008, 36:633-649.
16. Chiner M. Planning of expert systems for materials selection. Mater. Des. 1988, 9:195-203.
17. Dehghan-Manshadi B., Mahmudi H., Abedian A., Mahmudi R. A novel method for materials selection in mechanical design: combination of nonlinear normalization and a modified digital logic method. Mater. Des. 2007, 28:8-15.
18. Dieter G.E. Engineering Design: A Materials and Processing Approach 1983, McGraw-Hill, Boston, MA.
19. Djassemi M. A computer-aided approach to material selection and environmental auditing. J. Manuf. Technol. Manage. 2012, 23:704-716.
20. Edwards K.L. Strategic substitution of new materials for old: applications in automotive product development. Mater. Des. 2004, 25:529-533.
21. Edwards K.L. Selecting materials for optimum use in engineering components. Mater. Des. 2005, 26:469-473.
22. Edwards K.L. Towards an improved development process for new hip prostheses. Mater. Des. 2008, 29:558-561.
23. Edwards K.L. Materials influence on design: a decade of development. Mater. Des. 2011, 32:1073-1080.
24. Edwards K.L., Deng Y.M. Supporting design decision-making when applying materials in combination. Mater. Des. 2007, 28:1288-1297.
25. Farag M.M. Materials and Process Selection in Engineering 1979, Elsevier Science & Technology, London.
26. Farag M.M. Quantitative methods of materials selection. Handbook of Materials Selection 2002, John Wiley & Sons, London. M. Kutz (Ed.).
27. Farag M.M. Materials and Process Selection for Engineering Design 2008, CRC Press Taylor and Francis Group, London.
28. Farag M.M. Quantitative methods of materials substitution: application to automotive components. Mater. Des. 2008, 29:374-380.
29. Giaccobi S., Kromm F.X., Wargnier H., Danis M. Filtration in materials selection and multi-materials design. Mater. Des. 2009, 31:1842-1847.
30. Giachetti R.E. A decision support system for material and manufacturing process selection. J. Intell. Manuf. 1998, 9:265-276.
31. Henriques E., Pecas P., Silva A., Leite M. On the influence of material selection decisions on second order cost factors. Technology and Manufacturing Process Selection 2014, Springer, London.
32. Ishii K., Eubanks C.F., Di Marco P. Design for product retirement and material life-cycle. Mater. Des. 1994, 15:225-233.
33. Jahan A. Material selection in biomedical applications: comparing the comprehensive VIKOR and goal programming models. Int. J. Mater. Struct. Integrity 2012, 6:230-240.
34. Jahan A., Edwards K.L. Weighting of dependent and target-based criteria for optimal decision-making in materials selection process: biomedical applications. Mater. Des. 2013, 49:1000-1008.
35. Jahan A., Ismail M.Y., Sapuan S.M., Mustapha F. Material screening and choosing methods-a review. Mater. Des. 2010, 31:696-705.
36. Jalham I.S. Decision-making integrated information technology (IIT) approach for material selection. Int. J. Comput. Appl. Technol. 2006, 25:65-71.
37. Jha D., Kant T., Singh R. A critical review of recent research on functionally graded plates. Composite Struct. 2013, 96:833-849.
38. Karana, E., 2006. Intangible characteristics of materials in industrial design. The International Conference on Design and Emotion.
39. Karana E., Hekkert P., Kandachar P. Material considerations in product design: a survey on crucial material aspects used by product designers. Mater. Des. 2008, 29:1081-1089.
40. Kazemzadeh R.B., Behzadian M., Aghdasi M., Albadvi A. Integration of marketing research techniques into house of quality and product family design. Int. J. Adv. Manuf. Technol. 2009, 41:1019-1033.
41. Khan A.S., Azam M.T., Khan M., Mian S.A., Rehman I.U. An update on glass fiber dental restorative composites: a systematic review. Mater. Sci. Eng. C 2015, 47:26-39.
42. Kusiak A. Concurrent Engineering: Automation, Tools, and Techniques 1993, John Wiley & Sons.
43. Layer A., Brinke E.T., Houten F.V., Kals H., Haasis S. Recent and future trends in cost estimation. Int. J. Comput. Integr. Manuf. 2002, 15:499-510.
44. Ljungberg L.Y. Materials selection and design for development of sustainable products. Mater. Des. 2007, 28:466-479.
45. Ljungberg L.Y., Edwards K.L. Design, materials selection and marketing of successful products. Mater. Des. 2003, 24:519-529.
46. Lovatt A.M., Shercliff H.R. Manufacturing process selection in engineering design. Part 1: the role of process selection. Mater. Des. 1998, 19:205-215.
47. Mayyas A., Shen Q. Using quality function deployment and analytical hierarchy process for material selection of body-in-white. Mater. Des. 2011, 32:2771-2782.
48. Michael P. Selecting materials. Materials Enabled Designs 2009, Butterworth-Heinemann, Boston, MA, (Chapter 3).
49. Noble J.S., Tanchoco J. Concurrent design and economic justification in developing a product. Int. J. Prod. Res. 1990, 28:1225-1238.
50. Normung D.I.F. DIN 32992 Teil 1: Kosteninformationen, Berechnungsgrundlagen, Kalkulationsarten Undverfahren 1989, Deutsches Institut für Normung, Berlin.
51. Pfeifer M. Design requirements. Materials Enabled Designs 2009, Butterworth-Heinemann, Boston, MA, (Chapter 2).
52. Ramalhete P.S., Senos A.M.R., Aguiar C. Digital tools for material selection in product design. Mater. Des. 2010, 31:2275-2287.
53. Roth R., Field F., Clark J. Materials selection and multi-attribute utility analysis. J. Comput. Aided Mater. Des. 1994, 1:325-342.
54. Product Experience 2007, Elsevier. H.N.J. Schifferstein, P. Hekkert (Eds.).
55. Silva, A., Infante, V., 2015. The role of digital libraries in teaching materials science and engineering. Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education, Hershey, PA, USA, IGI Global.
56. Thurston D.L., Locascio A. Decision theory for design economics. Eng. Econ. 1994, 40:41-71.
57. Ulrich K.T., Eppinger S.D. Product Design and Development 2004, McGraw-Hill/Irwin, Boston, MA.
58. van Kesteren I. Selecting Materials in Product Design 2008, Faculty of Industrial Design Engineering, Delft, Delft University of Technology.
59. van Kesteren, I.E.H., Kandachar, P.V., Stappers, P.J., 2006. Activities in selecting materials by product designers. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.
60. Yan X., Gu P. Assembly/disassembly sequence planning for life-cycle cost estimation. Manuf. Sci. Eng., ASME 1995, MED-2 (2)/Mh-3 (2):935-956.
61. Zarandi M.H.F., Mansour S., Hosseinijou S.A., Avazbeigi M. A material selection methodology and expert system for sustainable product design. Int. J. Adv. Manuf. Technol. 2011, 57:885-903.
62. Baines T., Lightfoot H., Williams G.M., Greenough R. State-of-the-art in lean design engineering: a literature review on white collar lean. Proc. Inst. Mech. Eng. B: J. Eng. Manuf. 2006, 220:1539-1547.
63. Cavallini, C., Citti, P., Costanzo, L., Giorgetti, A., 2013a. An axiomatic approach to managing the information content in QFD: applications in material selection. In: The Seventh International Conference on Axiomatic Design, Worcester.
64. Cavallini C., Giorgetti A., Citti P., Nicolaie F. Integral aided method for material selection based on quality function deployment and comprehensive VIKOR algorithm. Mater. Des. 2013, 47:27-34.
65. Gudem M., Steinert M., Welo T. From lean product development to lean innovation: searching for a more valid approach for promoting utilitarian and emotional value. Int. J. Innov. Technol. Manage. 2014, 11. 1450008.
66. Haque B. Lean engineering in the aerospace industry. Proc. Inst. Mech. Eng. B: J. Eng. Manuf. 2003, 217:1409-1420.
67. Haque B., James-Moore M. Applying lean thinking to new product introduction. J. Eng. Des. 2004, 15:1-31.
68. Howard T.J., Culley S.J., Dekoninck E. Describing the creative design process by the integration of engineering design and cognitive psychology literature. Des. Stud. 2008, 29:160-180.
69. Jack H. Needs identification and specifications. Engineering Design, Planning, and Management 2013, Academic Press, Boston, MA, (Chapter 2).
70. Jahan A., Edwards K.L. Weighting of dependent and target-based criteria for optimal decision-making in materials selection process: biomedical applications. Mater. Des. 2013, 49:1000-1008.
71. Kasaei A., Abedian A., Milani A. An application of quality function deployment method in engineering materials selection. Mater. Des. 2014, 55:912-920.
72. Khan M.S., Al-Ashaab A., Shehab E., Haque B., Ewers P., Sorli M., et al. Towards lean product and process development. Int. J. Comput. Integr. Manuf. 2013, 26:1105-1116.
73. Leenders R.T.A., Van Engelen J.M., Kratzer J. Systematic design methods and the creative performance of new product teams: do they contradict or complement each other?. J. Prod. Innov. Manage. 2007, 24:166-179.
74. Prasad K., Chakraborty S. A quality function deployment-based model for materials selection. Mater. Des. 2013, 49:525-535.
75. Reich Y., Levy E. Managing product design quality under resource constraints. Int. J. Prod. Res. 2004, 42:2555-2572.
76. Scalice R.G.K., Brascher G.C., Becker D. A knowledge-based material selector using quality function deployment principles. Prod. Manage. Dev. 2012, 10:23-32.
77. Zarandi M.H.F., Mansour S., Hosseinijou S.A., Avazbeigi M. A material selection methodology and expert system for sustainable product design. Int. J. Adv. Manuf. Technol. 2011, 57:885-903.
78. Ashby M., Shercliff H., Cebon D. Materials: Engineering, Science, Processing and Design 2013, Butterworth-Heinemann, Oxford.
79. Ashby M.F. Material Selection in Mechanical Design 1992, Pergamon Press, Cambridge, UK.
80. Ashby M.F. Materials selection: multiple constraints and compound objectives. ASTM Spec. Tech. Publ. 1997, 1311:45-62.
81. Ashby M.F. Performance Indices 1997, 281-290. ASM International, Materials Park, OH.
82. Ashby M.F. Materials Selection in Mechanical Design 2005, Butterworth-Heinemann, Oxford.
83. Ashby M.F., Cebon D. A Compilation of Material Indices 1995, Granta Design Ltd., Cambridge, MA.
84. Ashby M.F., Johnson K. Materials and Design: The Art and Science of Material Selection in Product Design 2013, Butterworth-Heinemann, Oxford.
85. Ashby M.F., Brechet Y.J.M., Cebon D., Salvo L. Selection strategies for materials and processes. Mater. Des. 2004, 25:51-67.
86. Crilly N., Moultrie J., Clarkson P.J. Seeing things: consumer response to the visual domain in product design. Des. Stud. 2004, 25:547-577.
87. Deng Y.M., Edwards K.L. The role of materials identification and selection in engineering design. Mater. Des. 2007, 28:131-139.
88. Dieter, G.E., 1997. Overview of the materials selection process. ASM Metals Handbook, Materials Selection and Design, ASM International.
89. Edwards K.L. Selecting materials for optimum use in engineering components. Mater. Des. 2005, 26:469-473.
90. Edwards K.L., Deng Y.M. Supporting design decision-making when applying materials in combination. Mater. Des. 2007, 28:1288-1297.
91. Ermolaeva N.S., Kaveline K.G., Spoormaker J.L. Materials selection combined with optimal structural design: concept and some results. Mater. Des. 2002, 23:459-470.
92. Farag M.M. Materials and Process Selection in Engineering 1979, Elsevier Science & Technology, London.
93. Farag, M.M., 2002. Quantitative methods of materials selection. In: Kutz, M. (Ed.), Handbook of Materials Selection London, John Wiley & Sons.
94. Goel V., Chen J. Application of expert network for material selection in engineering design. Comput. Ind. 1996, 30:87-101.
95. Holloway L. Materials selection for optimal environmental impact in mechanical design. Mater. Des. 1998, 19:133-143.
96. Jahan A., Edwards K.L. A state-of-the-art survey on the influence of normalization techniques in ranking: improving the materials selection process in engineering design. Mater. Des. 2015, 65:335-342.
97. Jahan A., Ismail M.Y., Sapuan S.M., Mustapha F. Material screening and choosing methods-a review. Mater. Des. 2010, 31:696-705.
98. Karana E., Hekkert P., Kandachar P. Material considerations in product design: a survey on crucial material aspects used by product designers. Mater. Des. 2008, 29:1081-1089.
99. Karana E., Hekkert P., Kandachar P. Meanings of materials through sensorial properties and manufacturing processes. Mater. Des. 2009, 30:2778-2784.
100. Lovatt A.M., Shercliff H.R., Withers P.J. Material Selection and Processing 2000, Technology Enhancement Programme, London.
101. Ramalhete P.S., Senos A.M.R., Aguiar C. Digital tools for material selection in product design. Mater. Des. 2010, 31:2275-2287.
102. Sandstrom R. TALAT Lecture 1502 Criteria in Material Selection 1994, European Aluminum Association, Stockholm.
103. Sapuan S.M., Jacob M.S.D., Mustapha F., Ismail N. A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components. Mater. Des. 2002, 23:701-708.
104. Silva, A., Infante, V., 2015. The role of digital libraries in teaching materials science and engineering. Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education, p. 190.
105. Trethewey K.R., Wood R.J.K., Puget Y., Roberge P.R. Development of a knowledge-based system for material management. Mater. Des. 1998, 19:39-56.
106. Van Kesteren I., Stappers P.J., De Bruijn S. Materials in products selection: tools for including user-interaction in materials selection. Int. J. Des. 2007, 1:41-55.
107. Van Kesteren, I.E.H., Stappers, P.J., De Bruijn, J.C.M., 2007b. Defining user-interaction aspects for materials selection: three tools. In: The Web Proceedings of Nordic Design Research.
108. Ashby M.F. Multi-objective optimization in material design and selection. Acta Mater. 2000, 48:359-369.
109. Awad Z.K., Aravinthan T., Zhuge Y., Gonzalez F. A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Mater. Des. 2012, 33:534-544.
110. Charles J.A., Crane F.A.A., Furness J.A.G. Selection and Use of Engineering Materials 1997, Butterworth-Heinemann, Oxford.
111. Chiner M. Planning of expert systems for materials selection. Mater. Des. 1988, 9:195-203.
112. Cui X., Wang S., Hu S.J. A method for optimal design of automotive body assembly using multi-material construction. Mater. Des. 2008, 29:381-387.
113. Curtarolo S., Hart G.L., Nardelli M.B., Mingo N., Sanvito S., Levy O. The high-throughput highway to computational materials design. Nat. Mater. 2013, 12:191-201.
114. Deng Y.M., Edwards K.L. The role of materials identification and selection in engineering design. Mater. Des. 2007, 28:131-139.
115. Edwards K.L. Linking materials and design: an assessment of purpose and progress. Mater. Des. 2002, 23:255-264.
116. Edwards K.L. Designing of engineering components for optimal materials and manufacturing process utilisation. Mater. Des. 2003, 24:355-366.
117. Edwards K.L. Selecting materials for optimum use in engineering components. Mater. Des. 2005, 26:469-473.
118. Edwards K.L., Deng Y.M. Supporting design decision-making when applying materials in combination. Mater. Des. 2007, 28:1288-1297.
119. Farag M.M. Materials Selection for Engineering Design 1997, Prentice-Hall, New York, NY.
120. Farag, M.M., 2002. Quantitative methods of materials selection. In: Kutz, M. (Ed.), Handbook of Materials Selection, London, John Wiley & Sons.
121. Hazelrigg G.A. Validation of engineering design alternative selection methods. Eng. Optim. 2003, 35:103-120.
122. Hwang C.L., Yoon K. Multiple Attribute Decision Making: Methods and Applications: A State-of-the-Art Survey 1981, Springer-Verlag, New York, NY.
123. Jahan A., Bahraminasab M. Multicriteria decision analysis in improving quality of design in femoral component of knee prostheses: influence of interface geometry and material. Adv. Mater. Sci. Eng 2015, 16.
124. Jahan A., Edwards K.L. A state-of-the-art survey on the influence of normalization techniques in ranking: Improving the materials selection process in engineering design. Mater. Des. 2015, 65:335-342.
125. Jahan A., Ismail M.Y., Sapuan S.M., Mustapha F. Material screening and choosing methods-a review. Mater. Des. 2010, 31:696-705.
126. Mcdowell D.L., Panchal J.H., Choi H.-J., Seepersad C.C., Allen J.K., Mistree F. Integrated material, product, and process design-a new frontier in engineering systems design. Integrated Design of Multiscale, Multifunctional Materials and Products 2010, Butterworth-Heinemann, Boston, MA, (Chapter 1).
127. Mcdowell D.L., Panchal J.H., Choi H.-J., Seepersad C.C., Allen J.K., Mistree F. Critical path issues in materials design. Integrated Design of Multiscale, Multifunctional Materials and Products 2010, Butterworth-Heinemann, Boston, MA, (Chapter 2).
128. Mcdowell D.L., Panchal J.H., Choi H.-J., Seepersad C.C., Allen J.K., Mistree F. Overview of the framework for integrated design of materials, products, and design processes. Integrated Design of Multiscale, Multifunctional Materials and Products 2010, Butterworth-Heinemann, Boston, MA, (Chapter 3).
129. Miettinen K. Nonlinear Multiobjective Optimization 1999, Kluwer Academic Publishers, Boston, MA.
130. Rakshit S., Ananthasuresh G.K. Simultaneous material selection and geometry design of statically determinate trusses using continuous optimization. Struct. Multidiscip. Optim. 2008, 35:55-68.
131. Sepulveda A.E. Optimal material selection using branch and bound techniques. AIAA J. 1995, 33:340-347.
132. Shanian A., Milani A.S. A combined finite element-multiple criteria optimization approach for materials selection of gas turbine components. J. Appl. Mech. 2012, 1:304.
133. Sirisalee P., Ashby M.F., Parks G.T., Clarkson P.J. Multi criteria material selection in engineering design. Adv. Eng. Mater. 2004, 6:84-92.
134. Sirisalee P., Ashby M.F., Parks G.T., John Clarkson P. Multi criteria material selection of monolithic and multi materials in engineering design. Adv. Eng. Mater. 2006, 8:48-56.
135. Stolpe M., Svanberg K. A stress-constrained truss-topology and material-selection problem that can be solved by linear programming. Struct. Multidiscip. Optim. 2004, 27:126-129.
136. Tang X., Bassir D.H., Zhang W. Shape, sizing optimization and material selection based on mixed variables and genetic algorithm. Optim. Eng. 2010, 12:1-18.
137. Weaver P.M., Ashby M.F., Burgess S., Shibaike N. Selection of materials to reduce environmental impact: a case study on refrigerator insulation. Mater. Des. 1996, 17:11-17.
138. Angilella S., Greco S., Lamantia F., Matarazzo B. Assessing non-additive utility for multicriteria decision aid. Eur. J. Oper. Res. 2004, 158:734-744.
139. Asgharpour M.J. Multiple Criteria Decision Making 1999, Tehran University Publications, Tehran.
140. Ashby M., Johnson K. Chapter 1 - Function and personality. Materials and Design 2010, Butterworth-Heinemann, Oxford. second ed.
141. Ashby M., Johnson K. Chapter 4 - The stuff ... multi-dimensional materials. Materials and Design 2010, Butterworth-Heinemann, Oxford. second ed.
142. Ashby M., Johnson K. Chapter 10 - Conclusions. Materials and Design 2010, Butterworth-Heinemann, Oxford. second ed.
143. Ashby M.F., Brechet Y.J.M., Cebon D., Salvo L. Selection strategies for materials and processes. Mater. Des. 2004, 25:51-67.
144. Ataei M. Multi-Criteria Decision Making 2010, Shahrood University of Technology, Shahrood.
145. Bahraminasab M., Jahan A. Material selection for femoral component of total knee replacement using comprehensive VIKOR. Mater. Des. 2011, 32:4471-4477.
146. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Jahan A., Hong T.S., et al. On the influence of shape and material used for the femoral component pegs in knee prostheses for reducing the problem of aseptic loosening. Mater. Des. 2014, 416-428.
147. Bottomley P.A., Doyle J.R. A comparison of three weight elicitation methods: good, better, and best. Omega 2001, 29:553-560.
148. Cavallini C., Giorgetti A., Citti P., Nicolaie F. Integral aided method for material selection based on quality function deployment and comprehensive VIKOR algorithm. Mater. Des. 2013, 47:27-34.
149. Chang C.L. A modified VIKOR method for multiple criteria analysis. Environ. Monit. Assess. 2010, 168:339-344.
150. Chatterjee P., Athawale V.M., Chakraborty S. Selection of materials using compromise ranking and outranking methods. Mater. Des. 2009, 30:4043-4053.
151. Chatterjee P., Athawale V.M., Chakraborty S. Materials selection using complex proportional assessment and evaluation of mixed data methods. Mater. Des. 2011, 32:851-860.
152. Chen S.J.J., Hwang C.L., Beckmann M.J., Krelle W. Fuzzy Multiple Attribute Decision Making: Methods and Applications 1992, Springer-Verlag, Secaucus, NJ.
153. Chiner M. Planning of expert systems for materials selection. Mater. Des. 1988, 9:195-203.
154. Chu A.T.W., Kalaba R.E., Spingarn K. A comparison of two methods for determining the weights of belonging to fuzzy sets. J. Optim. Theory Appl. 1979, 27:531-538.
155. Cicek K., Celik M. Multiple attribute decision making solution to material selection problem based on modified fuzzy axiomatic design-model selection interface algorithm. Mater. Des. 2010, 31:2129-2133.
156. Dehghan-Manshadi B., Mahmudi H., Abedian A., Mahmudi R. A novel method for materials selection in mechanical design: combination of non-linear normalization and a modified digital logic method. Mater. Des. 2007, 28:8-15.
157. Deng H., Yeh C.H., Willis R.J. Inter-company comparison using modified TOPSIS with objective weights. Comput. Oper. Res. 2000, 27:963-973.
158. Diakoulaki D., Mavrotas G., Papayannakis L. Determining objective weights in multiple criteria problems: the critic method. Comput. Oper. Res. 1995, 22:763-770.
159. Dieter G.E. Overview of the Materials Selection Process. ASM Metals Handbook, Materials Selection and Design 1997, ASM International, Materials Park, OH.
160. Doyle J.R., Green R.H., Bottomley P.A. Judging relative importance: direct rating and point allocation are not equivalent. Organ. Behav. Hum. Decis. Process. 1997, 70:65-72.
161. Durst O., Ellermeier J., Berger C. Influence of plasma-nitriding and surface roughness on the wear and corrosion resistance of thin films (PVD/PECVD). Surf. Coatings Technol. 2008, 203:848-854.
162. Edwards W. How to use multiattribute utility measurement for social decision making. IEEE. Trans. Syst. Man. Cybern. 1977, 7:326-340.
163. Edwards K.L. Selecting materials for optimum use in engineering components. Mater. Des. 2005, 26:469-473.
164. Farag M.M. Materials and Process Selection in Engineering 1979, Elsevier Science & Technology, London.
165. Farag M.M. Materials Selection for Engineering Design 1997, Prentice-Hall, New York.
166. Farag M.M. Quantitative methods of materials selection. Handbook of Materials Selection 2002, John Wiley & Sons, London. M. Kutz (Ed.).
167. Favardin P., Lepelley D., Serais J. Borda rule, Copeland method and strategic manipulation. Rev. Econ. Des. 2002, 7:213-228.
168. Fayazbakhsh K., Abedian A., Manshadi B.D., Khabbaz R.S. Introducing a novel method for materials selection in mechanical design using Z-transformation in statistics for normalization of material properties. Mater. Des. 2009, 30:4396-4404.
169. Figueira J., Roy B. Determining the weights of criteria in the ELECTRE type methods with a revised Simos' procedure. Eur. J. Oper. Res. 2002, 139:317-326.
170. Figueira J.R., Greco S., Roy B. ELECTRE methods with interaction between criteria: an extension of the concordance index. Eur. J. Oper. Res. 2009, 199:478-495.
171. Fouladi, E., Fayazbakhsh, K., Abedian, A., 2010. Patch materials selection for ageing metallic aircraft structures using digital quantitative materials selection methods. 27th International Congress of the Aeronautical Sciences. Nice, France.
172. Giachetti R.E. A decision support system for material and manufacturing process selection. J. Intell. Manuf. 1998, 9:265-276.
173. Hajkowicz S., Collins K. A review of multiple criteria analysis for water resource planning and management. Water Resour. Manage. 2007, 21:1553-1566.
174. Hambali A., Sapuan M.S., Ismail N., Nukman Y. Material selection of polymeric composite automotive bumper beam using analytical hierarchy process. J. Cent. South Univ. Technol. (English Edition) 2010, 17:244-256.
175. Hambali A., Sapuan S.M., Rahim A.S., Ismail N., Nukman Y. Concurrent decisions on design concept and material using analytical hierarchy process at the conceptual design stage. Concurrent Eng. Res. Appl. 2011, 19:111-121.
176. Hobbs B.F., Chankong V., Hamadeh W., Stakhiv E.Z. Does choice of multicriteria method matter? An experiment in water resources planning. Water. Resour. Res. 1992, 28:1767-1779.
177. Huang, J.J., Tzeng, G.H., Liu, H.H., 2009. A revised VIKOR model for multiple criteria decision making - the perspective of regret theory. Cutting-Edge Research Topics on Multiple Criteria Decision Making, 761-768.
178. Hwang C.L., Lin M.J. Group Decision Making Under Multiple Criteria: Methods and Applications 1987, Springer-Verlag, Berlin.
179. Hwang C.L., Yoon K. Multiple Attribute Decision Making - Methods and Applications 1981, Springer-Verlag, Berlin.
180. Jacobs J.F., Van De Poel I., Osseweijer P. Clarifying the debate on selection methods for engineering: Arrow's impossibility theorem, design performances, and information basis. Res. Eng. Des. 2014, 25:3-10.
181. Jahan A., Edwards K.L. VIKOR method for material selection problems with interval numbers and target-based criteria. Mater. Des. 2013, 47:759-765.
182. Jahan A., Edwards K.L. A state-of-the-art survey on the influence of normalization techniques in ranking: improving the materials selection process in engineering design. Mater. Des. 2015, 65:335-342.
183. Jahan A., Ismail M.Y., Sapuan S.M., Mustapha F. Material screening and choosing methods - A review. Mater. Des. 2010, 31:696-705.
184. Jahan A., Ismail M.Y., Shuib S., Norfazidah D., Edwards K.L. An aggregation technique for optimal decision-making in materials selection. Mater. Des. 2011, 32:4918-4924.
185. Jahan A., Mustapha F., Ismail M.Y., Sapuan S.M., Bahraminasab M. A comprehensive VIKOR method for material selection. Mater. Des. 2011, 32:1215-1221.
186. Jahan A., Bahraminasab M., Edwards K.L. A target-based normalization technique for materials selection. Mater. Des. 2012, 35:647-654.
187. Jahan A., Mustapha F., Sapuan S.M., Ismail M.Y., Bahraminasab M. A framework for weighting of criteria in ranking stage of material selection process. Int. J. Adv. Manuf. Technol. 2012, 58:411-420.
188. Jee D.H., Kang K.J. A method for optimal material selection aided with decision making theory. Mater. Des. 2000, 21:199-206.
189. Jeya Girubha R., Vinodh S. Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component. Mater. Des. 2012, 37:478-486.
190. Jiang Y., Li B., Tanabashi Y. Estimating the relation between surface roughness and mechanical properties of rock joints. Int. J. Rock Mech. Min. Sci. 2006, 43:837-846.
191. Karana E., Hekkert P., Kandachar P. Material considerations in product design: a survey on crucial material aspects used by product designers. Mater. Des. 2008, 29:1081-1089.
192. Karana E., Hekkert P., Kandachar P. Meanings of materials through sensorial properties and manufacturing processes. Mater. Des. 2009, 30:2778-2784.
193. Karande P., Chakraborty S. Application of multi-objective optimization on the basis of ratio analysis (MOORA) method for materials selection. Mater. Des. 2012, 37:317-324.
194. Keeney R.L., Raiffa H. Decisions with Multiple Objectives: Preferences and Value Tradeoffs 1993, Cambridge University Press, New York.
195. Lee J.W., Kim S.H. Using analytic network process and goal programming for interdependent information system project selection. Comput. Oper. Res. 2000, 27:367-382.
196. Li, Y., Weston, N., Mavris, D., 2008. An approach for multi-criteria decision making method selection and development. 26th International Congress of the Aeronautical Sciences. Anchorage, AK.
197. Liao T.W. A fuzzy multicriteria decision-making method for material selection. J. Manuf. Syst. 1996, 15:1-12.
198. Lin K.-P., Ho H.-P., Hung K.-C., Pai P.-F. Combining fuzzy weight average with fuzzy inference system for material substitution selection in electric industry. Comput. Ind. Eng. 2012, 62:1034-1045.
199. Ma J., Fan Z.P., Huang L.H. A subjective and objective integrated approach to determine attribute weights. Eur. J. Oper. Res. 1999, 112:397-404.
200. Maity S.R., Chatterjee P., Chakraborty S. Cutting tool material selection using grey complex proportional assessment method. Mater. Des. 2012, 36:372-378.
201. Majumdar A. Selection of raw materials in textile spinning industry using fuzzy multi-criteria decision making approach. Fibers Polym. 2010, 11:121-127.
202. Mardani A., Jusoh A., Zavadskas E.K. Fuzzy multiple criteria decision-making techniques and applications - two decades review from 1994 to 2014. Expert Syst. Appl. 2015, 42:4126-4148.
203. Michael P. Chapter 3 - Selecting materials. Materials Enabled Designs 2009, Butterworth-Heinemann, Boston, MA.
204. Michael P. Chapter 10 - Detail design and testing. Materials Enabled Designs 2009, Butterworth-Heinemann, Boston, MA.
205. Milani A.S., Shanian A. Gear material selection with uncertain and incomplete data. Material performance indices and decision aid model. Int. J. Mech. Mater. Des. 2006, 3:209-222.
206. Milani A.S., Shanian A., Lynam C., Saaty T.L. An application of the analytic network process in multiple criteria material selection. Mater. Des 2012.
207. Olson D.L., Moshkovich H.M., Schellenberger R., Mechitov A.I. Consistency and accuracy in decision aids: experiments with four multiattribute systems. Decis. Sci. 1995, 26:723-747.
208. Opricovic S., Tzeng G.H. Compromise solution by MCDM methods: a comparative analysis of VIKOR and TOPSIS. Eur. J. Oper. Res. 2004, 156:445-455.
209. Pomerol J.C., Barba-Romero S. Multicriterion Decision in Management: Principles and Practice 2000, Springer, Amsterdam.
210. Pöyhönen M., Hämäläinen R.P. On the convergence of multiattribute weighting methods. Eur. J. Oper. Res. 2001, 129:569-585.
211. Pratyyush S., Jian-Bo Y. Multiple Criteria Decision Support in Engineering Design 1998, Springer, Berlin.
212. Ramalhete P.S., Senos A.M.R., Aguiar C. Digital tools for material selection in product design. Mater. Des. 2010, 31:2275-2287.
213. Ramík J., Perzina R. A method for solving fuzzy multicriteria decision problems with dependent criteria. Fuzzy Optim. Decis. Making 2010, 9:123-141.
214. Rao R.V. A material selection model using graph theory and matrix approach. Mater. Sci. Eng. A 2006, 431:248-255.
215. Rao R.V. A decision making methodology for material selection using an improved compromise ranking method. Mater. Des. 2008, 29:1949-1954.
216. Rao R.V., Davim J.P. A decision-making framework model for material selection using a combined multiple attribute decision-making method. Int. J. Adv. Manuf. Technol. 2008, 35:751-760.
217. Rao R.V., Patel B.K. A subjective and objective integrated multiple attribute decision making method for material selection. Mater. Des. 2010, 31:4738-4747.
218. Rongxi, Z., Jianrong, X., Dayi, H., 2009. Approach of determining interval entropy weight based on the subjective preference of decision-maker and its application. Control and Decision Conference. Guilin.
219. Roth R., Field F., Clark J. Materials selection and multi-attribute utility analysis. J. Comput. Aided Mater. Des. 1994, 1:325-342.
220. Saaty T.L. A scaling method for priorities in hierarchical structures. J. Math. Psychol. 1977, 15:234-281.
221. Saaty T.L. How to make a decision: the analytic hierarchy process. Eur. J. Oper. Res. 1990, 48:9-26.
222. Sayadi M.K., Heydari M., Shahanaghi K. Extension of VIKOR method for decision making problem with interval numbers. Appl. Math. Model. 2009, 33:2257-2262.
223. Shanian A., Savadogo O. ELECTRE I decision support model for material selection of bipolar plates for polymer electrolyte fuel cells applications. J. New Mater. Electrochem. Syst. 2006, 9:191-199.
224. Shanian A., Savadogo O. A material selection model based on the concept of multiple attribute decision making. Mater. Des. 2006, 27:329-337.
225. Shanian A., Savadogo O. A non-compensatory compromised solution for material selection of bipolar plates for polymer electrolyte membrane fuel cell (PEMFC) using ELECTRE IV. Electrochim. Acta. 2006, 51:5307-5315.
226. Shanian A., Savadogo O. TOPSIS multiple-criteria decision support analysis for material selection of metallic bipolar plates for polymer electrolyte fuel cell. J. Power Sources 2006, 159:1095-1104.
227. Shanian A., Savadogo O. A methodological concept for material selection of highly sensitive components based on multiple criteria decision analysis. Expert Syst. Appl. 2009, 36:1362-1370.
228. Shanian A., Milani A.S., Carson C., Abeyaratne R.C. A new application of ELECTRE III and revised Simos' procedure for group material selection under weighting uncertainty. Knowl. Based Syst. 2008, 21:709-720.
229. Shemshadi A., Shirazi H., Toreihi M., Tarokh M.J. A fuzzy VIKOR method for supplier selection based on entropy measure for objective weighting. Expert Syst. Appl. 2011, 38:12160-12167.
230. Shirland L.E., Jesse R.R., Thompson R.L., Iacovou C.L. Determining attribute weights using mathematical programming. Omega 2003, 31:423-437.
231. Simanaviciene R., Ustinovichius L. Sensitivity analysis for multiple criteria decision making methods: TOPSIS and SAW. Procedia - Soc. Behav. Sci. 2010, 2:7743-7744.
232. Swift K.G., Raines M., Booker J.D. Case studies in probabilistic design. J. Eng. Des. 2000, 11:299-316.
233. Thurston D.L., Carnahan J.V. Fuzzy ratings and utility analysis in preliminary design evaluation of multiple attributes. J. Mech. Des. - Trans. ASME 1992, 114:648-658.
234. Ullah A.M.M., Harib K.H. An intelligent method for selecting optimal materials and its application. Adv. Eng. Inform. 2008, 22:473-483.
235. Van Kesteren I.E.H. Product designers' information needs in materials selection. Mater. Des. 2008, 29:133-145.
236. Vincke P. Multicriteria Decision-Aid 1992, John Wiley & Sons, New York.
237. Von Winterfeldt D., Edwards W. Decision Analysis and Behavioral Research 1986, Cambridge University Press, Cambridge.
238. Voogd H. Multicriteria Evaluation for Urban and Regional Planning 1983, Pion Ltd., London.
239. Wallace K., Burgess S. Methods and tools for decision making in engineering design. Des. Stud. 1995, 16:429-446.
240. Wang Y.-M., Luo Y. Integration of correlations with standard deviations for determining attribute weights in multiple attribute decision making. Math. Comput. Model. 2010, 51:1-12.
241. Wang Y.M., Parkan C. A general multiple attribute decision-making approach for integrating subjective preferences and objective information. Fuzzy Sets Syst. 2006, 157:1333-1345.
242. Ward E., Hutton B.F. SMARTS and SMARTER: improved simple methods for multiattribute utility measurement. Organ. Behav. Hum. Decis. Process. 1994, 60:306-325.
243. Wu H.H. A comparative study of using grey relational analysis in multiple attribute decision making problems. Qual. Eng. 2002, 15:209-217.
244. Xu X. A note on the subjective and objective integrated approach to determine attribute weights. Eur. J. Oper. Res. 2004, 156:530-532.
245. Yeh A problem-based selection of multi-attribute decision-making methods. Int. Trans. Oper. Res. 2002, 9:169-181.
246. Yurdakul M., Tansel Ç.Y. Application of correlation test to criteria selection for multi criteria decision making (MCDM) models. Int. J. Adv. Manuf. Technol. 2009, 40:403-412.
247. Zeleny M. Multiple Criteria Decision Making 1982, McGraw-Hill, New York.
248. Zhao R., Neighbour G., Deutz P., Mcguire M. Materials selection for cleaner production: an environmental evaluation approach. Mater. Des. 2012, 37:429-434.
249. Zhou P., Ang B.W., Poh K.L. Comparing aggregating methods for constructing the composite environmental index: an objective measure. Ecol. Econ. 2006, 59:305-311.
250. Angilella S., Greco S., Lamantia F., Matarazzo B. Assessing non-additive utility for multicriteria decision aid. Eur. J. Oper. Res. 2004, 158:734-744.
251. Asgharpour M.J. Multiple Criteria Decision Making 1999, Tehran University Publications, Tehran.
252. Ashby M., Johnson K. Chapter 1 - Function and personality. Materials and Design 2010, Butterworth-Heinemann, Oxford. second ed.
253. Ashby M., Johnson K. Chapter 4 - The stuff ... multi-dimensional materials. Materials and Design 2010, Butterworth-Heinemann, Oxford. second ed.
254. Ashby M., Johnson K. Chapter 10 - Conclusions. Materials and Design 2010, Butterworth-Heinemann, Oxford. second ed.
255. Ashby M.F., Brechet Y.J.M., Cebon D., Salvo L. Selection strategies for materials and processes. Mater. Des. 2004, 25:51-67.
256. Ataei M. Multi-Criteria Decision Making 2010, Shahrood University of Technology, Shahrood.
257. Bahraminasab M., Jahan A. Material selection for femoral component of total knee replacement using comprehensive VIKOR. Mater. Des. 2011, 32:4471-4477.
258. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Jahan A., Hong T.S., et al. On the influence of shape and material used for the femoral component pegs in knee prostheses for reducing the problem of aseptic loosening. Mater. Des. 2014, 416-428.
259. Bottomley P.A., Doyle J.R. A comparison of three weight elicitation methods: good, better, and best. Omega 2001, 29:553-560.
260. Cavallini C., Giorgetti A., Citti P., Nicolaie F. Integral aided method for material selection based on quality function deployment and comprehensive VIKOR algorithm. Mater. Des. 2013, 47:27-34.
261. Chang C.L. A modified VIKOR method for multiple criteria analysis. Environ. Monit. Assess. 2010, 168:339-344.
262. Chatterjee P., Athawale V.M., Chakraborty S. Selection of materials using compromise ranking and outranking methods. Mater. Des. 2009, 30:4043-4053.
263. Chatterjee P., Athawale V.M., Chakraborty S. Materials selection using complex proportional assessment and evaluation of mixed data methods. Mater. Des. 2011, 32:851-860.
264. Chen S.J.J., Hwang C.L., Beckmann M.J., Krelle W. Fuzzy Multiple Attribute Decision Making: Methods and Applications 1992, Springer-Verlag, Secaucus, NJ.
265. Chiner M. Planning of expert systems for materials selection. Mater. Des. 1988, 9:195-203.
266. Chu A.T.W., Kalaba R.E., Spingarn K. A comparison of two methods for determining the weights of belonging to fuzzy sets. J. Optim. Theory Appl. 1979, 27:531-538.
267. Cicek K., Celik M. Multiple attribute decision making solution to material selection problem based on modified fuzzy axiomatic design-model selection interface algorithm. Mater. Des. 2010, 31:2129-2133.
268. Dehghan-Manshadi B., Mahmudi H., Abedian A., Mahmudi R. A novel method for materials selection in mechanical design: combination of non-linear normalization and a modified digital logic method. Mater. Des. 2007, 28:8-15.
269. Deng H., Yeh C.H., Willis R.J. Inter-company comparison using modified TOPSIS with objective weights. Comput. Oper. Res. 2000, 27:963-973.
270. Diakoulaki D., Mavrotas G., Papayannakis L. Determining objective weights in multiple criteria problems: the critic method. Comput. Oper. Res. 1995, 22:763-770.
271. Dieter G.E. Overview of the Materials Selection Process. ASM Metals Handbook, Materials Selection and Design 1997, ASM International, Materials Park, OH.
272. Doyle J.R., Green R.H., Bottomley P.A. Judging relative importance: direct rating and point allocation are not equivalent. Organ. Behav. Hum. Decis. Process. 1997, 70:65-72.
273. Durst O., Ellermeier J., Berger C. Influence of plasma-nitriding and surface roughness on the wear and corrosion resistance of thin films (PVD/PECVD). Surf. Coatings Technol. 2008, 203:848-854.
274. Edwards W. How to use multiattribute utility measurement for social decision making. IEEE. Trans. Syst. Man. Cybern. 1977, 7:326-340.
275. Edwards K.L. Selecting materials for optimum use in engineering components. Mater. Des. 2005, 26:469-473.
276. Farag M.M. Materials and Process Selection in Engineering 1979, Elsevier Science & Technology, London.
277. Farag M.M. Materials Selection for Engineering Design 1997, Prentice-Hall, New York.
278. Farag M.M. Quantitative methods of materials selection. Handbook of Materials Selection 2002, John Wiley & Sons, London. M. Kutz (Ed.).
279. Favardin P., Lepelley D., Serais J. Borda rule, Copeland method and strategic manipulation. Rev. Econ. Des. 2002, 7:213-228.
280. Fayazbakhsh K., Abedian A., Manshadi B.D., Khabbaz R.S. Introducing a novel method for materials selection in mechanical design using Z-transformation in statistics for normalization of material properties. Mater. Des. 2009, 30:4396-4404.
281. Figueira J., Roy B. Determining the weights of criteria in the ELECTRE type methods with a revised Simos' procedure. Eur. J. Oper. Res. 2002, 139:317-326.
282. Figueira J.R., Greco S., Roy B. ELECTRE methods with interaction between criteria: an extension of the concordance index. Eur. J. Oper. Res. 2009, 199:478-495.
283. Fouladi, E., Fayazbakhsh, K., Abedian, A., 2010. Patch materials selection for ageing metallic aircraft structures using digital quantitative materials selection methods. 27th International Congress of the Aeronautical Sciences. Nice, France.
284. Giachetti R.E. A decision support system for material and manufacturing process selection. J. Intell. Manuf. 1998, 9:265-276.
285. Hajkowicz S., Collins K. A review of multiple criteria analysis for water resource planning and management. Water Resour. Manage. 2007, 21:1553-1566.
286. Hambali A., Sapuan M.S., Ismail N., Nukman Y. Material selection of polymeric composite automotive bumper beam using analytical hierarchy process. J. Cent. South Univ. Technol. (English Edition) 2010, 17:244-256.
287. Hambali A., Sapuan S.M., Rahim A.S., Ismail N., Nukman Y. Concurrent decisions on design concept and material using analytical hierarchy process at the conceptual design stage. Concurrent Eng. Res. Appl. 2011, 19:111-121.
288. Hobbs B.F., Chankong V., Hamadeh W., Stakhiv E.Z. Does choice of multicriteria method matter? An experiment in water resources planning. Water. Resour. Res. 1992, 28:1767-1779.
289. Huang, J.J., Tzeng, G.H., Liu, H.H., 2009. A revised VIKOR model for multiple criteria decision making - the perspective of regret theory. Cutting-Edge Research Topics on Multiple Criteria Decision Making, 761-768.
290. Hwang C.L., Lin M.J. Group Decision Making Under Multiple Criteria: Methods and Applications 1987, Springer-Verlag, Berlin.
291. Hwang C.L., Yoon K. Multiple Attribute Decision Making - Methods and Applications 1981, Springer-Verlag, Berlin.
292. Jacobs J.F., Van De Poel I., Osseweijer P. Clarifying the debate on selection methods for engineering: Arrow's impossibility theorem, design performances, and information basis. Res. Eng. Des. 2014, 25:3-10.
293. Jahan A., Edwards K.L. VIKOR method for material selection problems with interval numbers and target-based criteria. Mater. Des. 2013, 47:759-765.
294. Jahan A., Edwards K.L. A state-of-the-art survey on the influence of normalization techniques in ranking: improving the materials selection process in engineering design. Mater. Des. 2015, 65:335-342.
295. Jahan A., Ismail M.Y., Sapuan S.M., Mustapha F. Material screening and choosing methods - A review. Mater. Des. 2010, 31:696-705.
296. Jahan A., Ismail M.Y., Shuib S., Norfazidah D., Edwards K.L. An aggregation technique for optimal decision-making in materials selection. Mater. Des. 2011, 32:4918-4924.
297. Jahan A., Mustapha F., Ismail M.Y., Sapuan S.M., Bahraminasab M. A comprehensive VIKOR method for material selection. Mater. Des. 2011, 32:1215-1221.
298. Jahan A., Bahraminasab M., Edwards K.L. A target-based normalization technique for materials selection. Mater. Des. 2012, 35:647-654.
299. Jahan A., Mustapha F., Sapuan S.M., Ismail M.Y., Bahraminasab M. A framework for weighting of criteria in ranking stage of material selection process. Int. J. Adv. Manuf. Technol. 2012, 58:411-420.
300. Jee D.H., Kang K.J. A method for optimal material selection aided with decision making theory. Mater. Des. 2000, 21:199-206.
301. Jeya Girubha R., Vinodh S. Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component. Mater. Des. 2012, 37:478-486.
302. Jiang Y., Li B., Tanabashi Y. Estimating the relation between surface roughness and mechanical properties of rock joints. Int. J. Rock Mech. Min. Sci. 2006, 43:837-846.
303. Karana E., Hekkert P., Kandachar P. Material considerations in product design: a survey on crucial material aspects used by product designers. Mater. Des. 2008, 29:1081-1089.
304. Karana E., Hekkert P., Kandachar P. Meanings of materials through sensorial properties and manufacturing processes. Mater. Des. 2009, 30:2778-2784.
305. Karande P., Chakraborty S. Application of multi-objective optimization on the basis of ratio analysis (MOORA) method for materials selection. Mater. Des. 2012, 37:317-324.
306. Keeney R.L., Raiffa H. Decisions with Multiple Objectives: Preferences and Value Tradeoffs 1993, Cambridge University Press, New York.
307. Lee J.W., Kim S.H. Using analytic network process and goal programming for interdependent information system project selection. Comput. Oper. Res. 2000, 27:367-382.
308. Li, Y., Weston, N., Mavris, D., 2008. An approach for multi-criteria decision making method selection and development. 26th International Congress of the Aeronautical Sciences. Anchorage, AK.
309. Liao T.W. A fuzzy multicriteria decision-making method for material selection. J. Manuf. Syst. 1996, 15:1-12.
310. Lin K.-P., Ho H.-P., Hung K.-C., Pai P.-F. Combining fuzzy weight average with fuzzy inference system for material substitution selection in electric industry. Comput. Ind. Eng. 2012, 62:1034-1045.
311. Ma J., Fan Z.P., Huang L.H. A subjective and objective integrated approach to determine attribute weights. Eur. J. Oper. Res. 1999, 112:397-404.
312. Maity S.R., Chatterjee P., Chakraborty S. Cutting tool material selection using grey complex proportional assessment method. Mater. Des. 2012, 36:372-378.
313. Majumdar A. Selection of raw materials in textile spinning industry using fuzzy multi-criteria decision making approach. Fibers Polym. 2010, 11:121-127.
314. Mardani A., Jusoh A., Zavadskas E.K. Fuzzy multiple criteria decision-making techniques and applications - two decades review from 1994 to 2014. Expert Syst. Appl. 2015, 42:4126-4148.
315. Michael P. Chapter 3 - Selecting materials. Materials Enabled Designs 2009, Butterworth-Heinemann, Boston, MA.
316. Michael P. Chapter 10 - Detail design and testing. Materials Enabled Designs 2009, Butterworth-Heinemann, Boston, MA.
317. Milani A.S., Shanian A. Gear material selection with uncertain and incomplete data. Material performance indices and decision aid model. Int. J. Mech. Mater. Des. 2006, 3:209-222.
318. Milani A.S., Shanian A., Lynam C., Saaty T.L. An application of the analytic network process in multiple criteria material selection. Mater. Des 2012.
319. Olson D.L., Moshkovich H.M., Schellenberger R., Mechitov A.I. Consistency and accuracy in decision aids: experiments with four multiattribute systems. Decis. Sci. 1995, 26:723-747.
320. Opricovic S., Tzeng G.H. Compromise solution by MCDM methods: a comparative analysis of VIKOR and TOPSIS. Eur. J. Oper. Res. 2004, 156:445-455.
321. Pomerol J.C., Barba-Romero S. Multicriterion Decision in Management: Principles and Practice 2000, Springer, Amsterdam.
322. Pöyhönen M., Hämäläinen R.P. On the convergence of multiattribute weighting methods. Eur. J. Oper. Res. 2001, 129:569-585.
323. Pratyyush S., Jian-Bo Y. Multiple Criteria Decision Support in Engineering Design 1998, Springer, Berlin.
324. Ramalhete P.S., Senos A.M.R., Aguiar C. Digital tools for material selection in product design. Mater. Des. 2010, 31:2275-2287.
325. Ramík J., Perzina R. A method for solving fuzzy multicriteria decision problems with dependent criteria. Fuzzy Optim. Decis. Making 2010, 9:123-141.
326. Rao R.V. A material selection model using graph theory and matrix approach. Mater. Sci. Eng. A 2006, 431:248-255.
327. Rao R.V. A decision making methodology for material selection using an improved compromise ranking method. Mater. Des. 2008, 29:1949-1954.
328. Rao R.V., Davim J.P. A decision-making framework model for material selection using a combined multiple attribute decision-making method. Int. J. Adv. Manuf. Technol. 2008, 35:751-760.
329. Rao R.V., Patel B.K. A subjective and objective integrated multiple attribute decision making method for material selection. Mater. Des. 2010, 31:4738-4747.
330. Rongxi, Z., Jianrong, X., Dayi, H., 2009. Approach of determining interval entropy weight based on the subjective preference of decision-maker and its application. Control and Decision Conference. Guilin.
331. Roth R., Field F., Clark J. Materials selection and multi-attribute utility analysis. J. Comput. Aided Mater. Des. 1994, 1:325-342.
332. Saaty T.L. A scaling method for priorities in hierarchical structures. J. Math. Psychol. 1977, 15:234-281.
333. Saaty T.L. How to make a decision: the analytic hierarchy process. Eur. J. Oper. Res. 1990, 48:9-26.
334. Sayadi M.K., Heydari M., Shahanaghi K. Extension of VIKOR method for decision making problem with interval numbers. Appl. Math. Model. 2009, 33:2257-2262.
335. Shanian A., Savadogo O. ELECTRE I decision support model for material selection of bipolar plates for polymer electrolyte fuel cells applications. J. New Mater. Electrochem. Syst. 2006, 9:191-199.
336. Shanian A., Savadogo O. A material selection model based on the concept of multiple attribute decision making. Mater. Des. 2006, 27:329-337.
337. Shanian A., Savadogo O. A non-compensatory compromised solution for material selection of bipolar plates for polymer electrolyte membrane fuel cell (PEMFC) using ELECTRE IV. Electrochim. Acta. 2006, 51:5307-5315.
338. Shanian A., Savadogo O. TOPSIS multiple-criteria decision support analysis for material selection of metallic bipolar plates for polymer electrolyte fuel cell. J. Power Sources 2006, 159:1095-1104.
339. Shanian A., Savadogo O. A methodological concept for material selection of highly sensitive components based on multiple criteria decision analysis. Expert Syst. Appl. 2009, 36:1362-1370.
340. Shanian A., Milani A.S., Carson C., Abeyaratne R.C. A new application of ELECTRE III and revised Simos' procedure for group material selection under weighting uncertainty. Knowl. Based Syst. 2008, 21:709-720.
341. Shemshadi A., Shirazi H., Toreihi M., Tarokh M.J. A fuzzy VIKOR method for supplier selection based on entropy measure for objective weighting. Expert Syst. Appl. 2011, 38:12160-12167.
342. Shirland L.E., Jesse R.R., Thompson R.L., Iacovou C.L. Determining attribute weights using mathematical programming. Omega 2003, 31:423-437.
343. Simanaviciene R., Ustinovichius L. Sensitivity analysis for multiple criteria decision making methods: TOPSIS and SAW. Procedia - Soc. Behav. Sci. 2010, 2:7743-7744.
344. Swift K.G., Raines M., Booker J.D. Case studies in probabilistic design. J. Eng. Des. 2000, 11:299-316.
345. Thurston D.L., Carnahan J.V. Fuzzy ratings and utility analysis in preliminary design evaluation of multiple attributes. J. Mech. Des. - Trans. ASME 1992, 114:648-658.
346. Ullah A.M.M., Harib K.H. An intelligent method for selecting optimal materials and its application. Adv. Eng. Inform. 2008, 22:473-483.
347. Van Kesteren I.E.H. Product designers' information needs in materials selection. Mater. Des. 2008, 29:133-145.
348. Vincke P. Multicriteria Decision-Aid 1992, John Wiley & Sons, New York.
349. Von Winterfeldt D., Edwards W. Decision Analysis and Behavioral Research 1986, Cambridge University Press, Cambridge.
350. Voogd H. Multicriteria Evaluation for Urban and Regional Planning 1983, Pion Ltd., London.
351. Wallace K., Burgess S. Methods and tools for decision making in engineering design. Des. Stud. 1995, 16:429-446.
352. Wang Y.-M., Luo Y. Integration of correlations with standard deviations for determining attribute weights in multiple attribute decision making. Math. Comput. Model. 2010, 51:1-12.
353. Wang Y.M., Parkan C. A general multiple attribute decision-making approach for integrating subjective preferences and objective information. Fuzzy Sets Syst. 2006, 157:1333-1345.
354. Ward E., Hutton B.F. SMARTS and SMARTER: improved simple methods for multiattribute utility measurement. Organ. Behav. Hum. Decis. Process. 1994, 60:306-325.
355. Wu H.H. A comparative study of using grey relational analysis in multiple attribute decision making problems. Qual. Eng. 2002, 15:209-217.
356. Xu X. A note on the subjective and objective integrated approach to determine attribute weights. Eur. J. Oper. Res. 2004, 156:530-532.
357. Yeh A problem-based selection of multi-attribute decision-making methods. Int. Trans. Oper. Res. 2002, 9:169-181.
358. Yurdakul M., Tansel Ç.Y. Application of correlation test to criteria selection for multi criteria decision making (MCDM) models. Int. J. Adv. Manuf. Technol. 2009, 40:403-412.
359. Zeleny M. Multiple Criteria Decision Making 1982, McGraw-Hill, New York.
360. Zhao R., Neighbour G., Deutz P., Mcguire M. Materials selection for cleaner production: an environmental evaluation approach. Mater. Des. 2012, 37:429-434.
361. Zhou P., Ang B.W., Poh K.L. Comparing aggregating methods for constructing the composite environmental index: an objective measure. Ecol. Econ. 2006, 59:305-311.
362. Afzal M.A.F., Kesarwani P., Reddy K.M., Kalmodia S., Basu B., Balani K. Functionally graded hydroxyapatite-alumina-zirconia biocomposite: Synergy of toughness and biocompatibility. Mater. Sci. Eng. C 2012, 32:1164-1173.
363. Andersson J. A survey of multiobjective optimization in engineering design. Department of Mechanical Engineering 2000, Linkoping University, Linkoping, Sweden, Technical Report No: LiTH-IKP.
364. Ashby M. Multi-objective optimization in material design and selection. Acta Mater. 2000, 48:359-369.
365. Ashby M.F. Materials Selection in Mechanical Design 2005, Butterworth-Heinemann, Amsterdam.
366. Ashby M.F., Johnson K. Materials and Design: The Art and Science of Material Selection in Product Design 2013, Butterworth-Heinemann, Amsterdam.
367. 2 functionally graded material by electrophoretic deposition. J. Mech. Behav. Biomed. Mater. 2012, 12:144-150.
368. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Arumugam M., Hong T.S. Aseptic loosening of femoral components - a review of current and future trends in materials used. Mater. Des. 2012, 42:459-470.
369. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Arumugam M. Aseptic loosening of femoral components-materials engineering and design considerations. Mater. Des. 2013, 44:155-163.
370. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Hong T.S., Naghibi H. Material tailoring of the femoral component in a total knee replacement to reduce the problem of aseptic loosening. Mater. Des. 2013, 52:441-451.
371. Bahraminasab M., Sahari B., Edwards K., Farahmand F., Hong T.S., Arumugam M., et al. Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacement. Mater. Des. 2014, 53:159-173.
372. Bahraminasab M., Sahari B., Edwards K., Farahmand F., Jahan A., Hong T.S., et al. On the influence of shape and material used for the femoral component pegs in knee prostheses for reducing the problem of aseptic loosening. Mater. Des. 2014, 55:416-428.
373. Bal B.S., Garino J., Ries M., Rahaman M.N. Ceramic materials in total joint arthroplasty. Semin. Arthroplasty 2006, 17:94-101.
374. Brechet Y., Embury J.D. Architectured materials: Expanding materials space. Scr. Mater. 2013, 68:1-3.
375. Cihan M.T., Guner A., Yuzer N. Response surfaces for compressive strength of concrete. Constr. Build. Mater. 2012, 40:763-774.
376. Curtarolo S., Hart G.L., Nardelli M.B., Mingo N., Sanvito S., Levy O. The high-throughput highway to computational materials design. Nat. Mater. 2013, 12:191-201.
377. Deka D.J., Sandeep G., Chakraborty D., Dutta A. Multiobjective optimization of laminated composites using finite element method and genetic algorithm. J. Reinf. Plast. Comp. 2005, 24:273-285.
378. Edwards K. Selecting materials for optimum use in engineering components. Mater. Des. 2005, 26:469-473.
379. Edwards K.L. Materials influence on design: A decade of development. Mater. Des. 2011, 32:1073-1080.
380. Ermolaeva N.S., Kaveline K.G., Spoormaker J.L. Materials selection combined with optimal structural design: Concept and some results. Mater. Des. 2002, 23:459-470.
381. Goupee A.J., Vel S.S. Multi-objective optimization of functionally graded materials with temperature-dependent material properties. Mater. Des. 2007, 28:1861-1879.
382. Hambali A. Selection of Conceptual Design Using Analytical Hierarchy Process for Automotive Bumper Beam under Concurrent Engineering Environment 2009, Universiti Putra Malaysia, Serdang.
383. Ilzarbe L., Alvarez M.J., Viles E., Tanco M. Practical applications of design of experiments in the field of engineering: A bibliographical review. Qual. Reliab. Eng. Int. 2008, 24:417-428.
384. Jahan A., Edwards K.L. Weighting of dependent and target-based criteria for optimal decision-making in materials selection process: Biomedical applications. Mater. Des. 2013, 49:1000-1008.
385. Jahan A., Ismail M., Sapuan S., Mustapha F. Material screening and choosing methods - A review. Mater. Des. 2010, 31:696-705.
386. Lazic Z.R. Design of Experiments in Chemical Engineering: A Practical Guide 2004, Wiley-VCH, Weinheim.
387. Lin D., Li Q., Li W., Zhou S., Swain M.V. Design optimization of functionally graded dental implant for bone remodeling. Composites Part B: Eng. 2009, 40:668-675.
388. Little R. Mechanical Reliability Improvement: Probability and Statistics for Experimental Testing 2003, Marcel Dekker, New York.
389. Milani A., Wang H., Frey D., Abeyaratne R. Evaluating three DOE methodologies: Optimization of a composite laminate under fabrication error. Qual. Eng. 2008, 21:96-110.
390. Myers R.H., Montgomery D.C., Anderson-Cook C.M. Response Surface Methodology: Process and Product Optimization Using Designed Experiments 2009, John Wiley & Sons, New York.
391. Pelegri A.A., Tekkam A. Optimization of laminates fracture toughness using design of experiments and response surface. J. Comp. Mater. 2003, 37:579-596.
392. Pelletier J.L., Vel S.S. Multi-objective optimization of fiber reinforced composite laminates for strength, stiffness and minimal mass. Comput. Struct. 2006, 84:2065-2080.
393. Qiu L.-M., Sun L.-F., Liu X.-J., Zhang S.-Y. Material selection combined with optimal structural design for mechanical parts. J. Zhejiang Univ. Sci. A 2013, 14:383-392.
394. Rahman H.S.A., Choudhury D., Osman N.A.A., Shasmin H.N., Abas W.A.B.W. In vivo and in vitro outcomes of alumina, zirconia and their composited ceramic-on-ceramic hip joints. J. Ceram. Soc. Jpn. 2013, 121:382-387.
395. Robinson T.J., Borror C.M., Myers R.H. Robust parameter design: a review. Qual. Reliab. Eng. Int. 2004, 20:81-101.
396. Sadollah A., Bahreininejad A. Optimum gradient material for a functionally graded dental implant using metaheuristic algorithms. J. Mech. Behav. Biomed. Mater. 2011, 4:1384-1395.
397. Sapuan S., Mansor M.R. Concurrent engineering approach in the development of composite products: A review. Mater. Des. 2014, 58:161-167.
398. Taylor M., Prendergast P.J. Four decades of finite element analysis of orthopaedic devices: Where are we now and what are the opportunities?. J. Biomech. 2015, 48:767-778.
399. Thompson S.C. Material Design vs Material Selection: A Trade-Off between Design Freedom and Design Simplicity 2007, Georgia Institute of Technology, Atlanta, GA.
400. Asiedu Y., Gu P. Product life cycle cost analysis: state of the art review. Int. J. Prod. Res. 1998, 36:883-908.
401. Bahraminasab M., Jahan A. Material selection for femoral component of total knee replacement using comprehensive VIKOR. Mater. Des. 2011, 32:4471-4477.
402. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Hong T.S., Naghibi H. Material tailoring of the femoral component in a total knee replacement to reduce the problem of aseptic loosening. Mater. Des. 2013, 52:441-451.
403. Bahraminasab M., Sahari B., Edwards K.L., Farahmand F., Hong T.S., Arumugam M., et al. Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacement. Mater. Des. 2014, 53:159-173.
404. Bahraminasab M., Sahari B.B., Edwards K.L., Farahmand F., Jahan A., Hong T.S., et al. On the influence of shape and material used for the femoral component pegs in knee prostheses for reducing the problem of aseptic loosening. Mater. Des. 2014, 416-428.
405. Baker A.A., Rose L.R.F., Jones R. Advances in the Bonded Composite Repair of Metallic Aircraft Structure 2002, Oxford, Elsevier.
406. Chauhan A., Vaish R. Hard coating material selection using multi-criteria decision making. Mater. Des. 2013, 44:240-245.
407. Chen S.J.J., Hwang C.L., Beckmann M.J., Krelle W. Fuzzy Multiple Attribute Decision Making: Methods and Applications 1992, Springer-Verlag New York, Inc., Secaucus, NJ.
408. Dehghan-Manshadi B., Mahmudi H., Abedian A., Mahmudi R. A novel method for materials selection in mechanical design: combination of non-linear normalization and a modified digital logic method. Mater. Des. 2007, 28:8-15.
409. Del Castillo E. Multiresponse process optimization via constrained confidence regions. J. Qual. Technol. 1996, 28:61-70.
410. Del Castillo E., Montgomery D.C. A nonlinear programming solution to the dual response problem. J. Qual. Technol. 1993, 25:199-204.
411. Derringer G., Suich R. Simultaneous optimization of several response variables. J. Qual. Technol. 1980, 12:214-219.
412. Duong C.N., Wang C.H. Composite Repair: Theory and Design 2007, Oxford, Elsevier.
413. Farag M.M. Materials Selection for Engineering Design 1997, Prentice-Hall, New York, NY.
414. Farag M.M. Quantitative methods of materials selection. Handbook of Materials Selection 2002, London, John Wiley & Sons. M. Kutz (Ed.).
415. Farag M.M. Materials and Process Selection for Engineering Design 2008, CRC Press Taylor and Francis Group, London.
416. Fayazbakhsh K., Abedian A. Materials selection for applications in space environment considering outgassing phenomenon. Adv. Space Res. 2009, 45:741-749.
417. Fouladi, E., Fayazbakhsh, K., Abedian, A., 2010. Patch materials selection for ageing metallic aircraft structures using digital quantitative materials selection methods. In: 27th International Congress of the Aeronautical Sciences, Nice, France.
418. Gibson L.J., Ashby M.F. Cellular Solids: Structure and Properties 1999, Cambridge, Cambridge Univ. Press.
419. Goh Y.M., Newnes L.B., Mileham A.R., Mcmahon C.A., Saravi M.E. Uncertainty in through-life costing-review and perspectives. Eng. Manage., IEEE Trans. 2010, 57:689-701.
420. Jahan A., Bahraminasab M. Multicriteria decision analysis in improving quality of design in femoral component of knee prostheses: influence of interface geometry and material. Adv. Mater. Sci. Eng. 2015, 2015:16.
421. Jahan, A., Edwards, K.L., 2013. VIKOR method for material selection problems with interval numbers and target-based criteria, 47, 759-765.
422. Jahan A., Ismail M.Y., Shuib S., Norfazidah D., Edwards K.L. An aggregation technique for optimal decision-making in materials selection. Mater. Des. 2011, 32:4918-4924.
423. Jahan A., Mustapha F., Ismail M.Y., Sapuan S.M., Bahraminasab M. A comprehensive VIKOR method for material selection. Mater. Des. 2011, 32:1215-1221.
424. Jahan A., Bahraminasab M., Edwards K.L. A target-based normalization technique for materials selection. Mater. Des. 2012, 35:647-654.
425. Jee D.H., Kang K.J. A method for optimal material selection aided with decision making theory. Mater. Des. 2000, 21:199-206.
426. Jeya Girubha R., Vinodh S. Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component. Mater. Des. 2012, 37:478-486.
427. Karande P., Gauri S.K., Chakraborty S. Applications of utility concept and desirability function for materials selection. Mater. Des. 2012, 45:349-358.
428. Kurtz S., Ong K., Lau E., Mowat F., Halpern M. Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030. J. Bone Joint Surg. - Ser. A 2007, 89:780-785.
429. Kutz M. Handbook of Materials Selection 2002, London, John Wiley & Sons.
430. Leite M., Silva A., Henriques E., Madeira J. Materials selection for a set of multiple parts considering manufacturing costs and weight reduction with structural isoperformance using direct multisearch optimization. Struct. Multidiscip. Optim. 2015, 1-10.
431. Lemaire R. Fatigue fracture of the femoral component in a mobile bearing knee prosthesis. Acta. Orthop. Belg. 2010, 76:274-281.
432. Levine B., Fabi D. Porous metals in orthopedic applications-a review. Materwiss. Werksttech. 2010, 41:1001-1010.
433. Marsh G. Patching them up, the composites way. Reinf. Plast. 2014, 58:40-44.
434. Montgomery D.C., Runger G.C. Applied Statistics and Probability for Engineers 2010, John Wiley & Sons.
435. Noorossana R., Ardakani M.K. A weighted metric method to optimize multi-response robust problems. J. Ind. Eng. Int. 2009, 5:10-19.
436. Oonishi H., Kim S., Kyomoto M., Iwamoto M., Ueno M. PE wear in ceramic/PE bearing surface in total knee arthroplasty: Clinical experiences of more than 24 years. Bioceramics Alternative Bearings in Joint Arthroplasty 2006, 101-110. Steinkopff.
437. Park J.B., Bronzino J.D. Biomaterials: Principles and Applications 2003, CRC, Boca Roton, FL.
438. Pasandideh S.H.R., Niaki S.T.A. Multi-response simulation optimization using genetic algorithm within desirability function framework. Appl. Math. Comput. 2006, 175:366-382.
439. Ramakrishna S., Mayer J., Wintermantel E., Leong K.W. Biomedical applications of polymer-composite materials: a review. Composites Sci. Technol. 2001, 61:1189-1224.
440. Rao R.V. A material selection model using graph theory and matrix approach. Mater. Sci. Eng. A 2006, 431:248-255.
441. Rao R.V., Davim J.P. A decision-making framework model for material selection using a combined multiple attribute decision-making method. Int. J. Adv. Manuf. Technol. 2008, 35:751-760.
442. Rezvani M., Jahan A. Effect of initiator, design, and material on crashworthiness performance of thin-walled cylindrical tubes: a primary multi-criteria analysis in lightweight design. Thin Wall Struct. 2015, 96, 169-182.
443. Shanian A., Savadogo O. A non-compensatory compromised solution for material selection of bipolar plates for polymer electrolyte membrane fuel cell (PEMFC) using ELECTRE IV. Electrochim. Acta. 2006, 51:5307-5315.
444. Shanian A., Milani A.S., Carson C., Abeyaratne R.C. A new application of ELECTRE III and revised Simos' procedure for group material selection under weighting uncertainty. Knowl. Based Syst. 2008, 21:709-720.
445. Teoh S.H. Fatigue of biomaterials: a review. Int. J. Fatigue. 2000, 22:825-837.
446. Thurston D.L., Locascio A. Decision theory for design economics. Eng. Econ. 1994, 40:41-71.
447. Wu G., Yang J.M. The mechanical behavior of GLARE laminates for aircraft structures. JOM J. Miner., Met. Mater. Soc. 2005, 57:72-79.
448. Aceves C.M., Skordos A.A., Sutcliffe M.P.F. Design selection methodology for composite structures. Mater. Des. 2008, 29:418-426.
449. Ashby M., Shercliff H., Cebon D. Materials: Engineering, Science, Processing and Design 2013, Butterworth-Heinemann, Oxford.
450. Ashby M.F. Materials Selection in Mechanical Design 2005, Butterworth-Heinemann, Oxford.
451. Farag, M.M., 2002. Quantitative methods of materials selection. In: Kutz, M. (Ed.), Handbook of Materials Selection. Wiley, New York, pp. 3-26.
452. Hazelrigg G.A. Validation of engineering design alternative selection methods. Eng. Optim. 2003, 35:103-120.
453. 2Si composite based on TOPSIS method. Mater. Des. 2013, 46:442-450.
454. Leite M., Silva A., Henriques E., Madeira J. Materials selection for a set of multiple parts considering manufacturing costs and weight reduction with structural isoperformance using direct multisearch optimization. Struct. Multidisciplinary Optim. 2015, 52:635-644.
455. McDowell D.L., Olson G.B. Concurrent design of hierarchical materials and structures. Sci. Model. Simulations 2009, 15:207-240.
456. Silva, A., 2015. Materials as a bridge between science, engineering, and design. In: Lim, H.W. (Ed.), Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education. IGI Global, Hershey, PA, pp. 292-308.
457. Sirisalee P., Ashby M.F., Parks G.T., Clarkson P.J. Multi-criteria material selection in engineering design. Adv. Eng. Mater. 2004, 6:84-92.