Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacement

Materials and Design

Volumn 53, Issue , 2014, Pages 159-173

  Bahraminasab, Marjan ^a   Sahari, B B ^a   Edwards, K L ^b   Farahmand, Farzam ^c,d   Hong, Tang Sai ^a   Arumugam, Manohar ^a   Jahan, Ali ^e  

^a UNIVERSITY PUTRA MALAYSIA   (Malaysia)

^b ASTON UNIVERSITY   (United Kingdom)

^c SHARIF UNIVERSITY OF TECHNOLOGY   (Iran)

^d TEHRAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

^e ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Aseptic loosening; Design of experiments; Knee prosthesis; Material selection and design; Multi objective decision making

Indexed keywords

ARTHROPLASTY; BIOLOGICAL MATERIALS; CHROMIUM ALLOYS; DESIGN; DESIGN OF EXPERIMENTS; FUNCTIONS; IMPLANTS (SURGICAL); JOINTS (ANATOMY); KNEE PROSTHESES; LARGE SCALE SYSTEMS; OPTIMAL SYSTEMS; OPTIMIZATION;

ASEPTIC LOOSENING; ENGINEERED BIOMATERIALS; FUNCTIONALLY GRADED MATERIAL (FGM); MATERIAL SELECTION; MULTI OBJECTIVE DECISION MAKING; MULTI-OBJECTIVE DESIGN OPTIMIZATION; RESPONSE SURFACE METHODOLOGY; TOTAL KNEE REPLACEMENT;

FUNCTIONALLY GRADED MATERIALS;

EID: 84881017583     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.06.050     Document Type: Article

References (34)

1. Pelegri A.A., Tekkam A. Optimization of laminates fracture toughness using design of experiments and response surface. J Compos Mater 2003, 37(7):579-596.
2. Lin D., et al. Design optimization of functionally graded dental implant for bone remodeling. Compos B Eng 2009, 40(7):668-675.
3. Sadollah A., Bahreininejad A. Optimum gradient material for a functionally graded dental implant using metaheuristic algorithms. J Mech Behav Biomed Mater 2011, 4(7):1384-1395.
4. Hedia H., et al. Development of cementless metal-backed acetabular cup prosthesis using functionally graded material. Int J Mech Mater Des 2005, 2(3):259-267.
5. Gong H., et al. Effects of materials of cementless femoral stem on the functional adaptation of bone. J Bionic Eng 2012, 9(1):66-74.
6. Enab T.A. A comparative study of the performance of metallic and FGM tibia tray components in total knee replacement joints. Comput Mater Sci 2011, 53(1):94-100.
7. Bahraminasab M., et al. Aseptic loosening of femoral components-materials engineering and design considerations. Mater Des 2013, 44:155-163.
8. Enab T.A., Bondok N.E. Material selection in the design of the tibia tray component of cemented artificial knee using finite element method. Mater Des 2013, 44:454-460.
9. Ilzarbe L., et al. Practical applications of design of experiments in the field of engineering: a bibliographical review. Qual Relia Eng Int 2008, 24(4):417-428.
10. Nemat-Alla M. Reduction of thermal stresses by developing two-dimensional functionally graded materials. Int J Solids Struct 2003, 40(26):7339-7356.
11. Levine B., Fabi D. Porous metals in orthopedic applications - a review. Poröse Metalle in orthopädischen Anwendungen - Eine Übersicht. Materialwiss Werkstofftech 2010, 41(12):1001-1010.
12. Bahraminasab M., et al. Finite element analysis of the effect of shape memory alloy on the stress distribution and contact pressure in total knee replacement. Trends Biomater Artif Organs 2011, 25(3):95-100.
13. Godest A.C., et al. Simulation of a knee joint replacement during a gait cycle using explicit finite element analysis. J Biomech 2002, 35(2):267-275.
14. Cho H.J., et al. Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials. Mater Chem Phys 2004, 88(1):9-16.
15. Shirazi-Adl A., Dammak M., Paiement G. Experimental determination of friction characteristics at the trabecular bone/porousâ€[U+06AF]coated metal interface in cementless implants. J Biomed Mater Res 1993, 27(2):167-175.
16. Gibson L.J., Ashby M.F. Cellular solids: structure and properties 1999, Cambridge Univ Pr.
17. Yan W., Berthe J., Wen C. Numerical investigation of the effect of porous titanium femoral prosthesis on bone remodeling. Mater Des 2011, 32(4):1776-1782.
18. Halloran J.P., Petrella A.J., Rullkoetter P.J. Explicit finite element modeling of total knee replacement mechanics. J Biomech 2005, 38(2):323-331.
19. Liau J., et al. Effect of Fuji pressure sensitive film on actual contact characteristics of artificial tibiofemoral joint. Clin Biomech 2002, 17(9-10):698-704.
20. Liau J., et al. The effect of malalignment on stresses in polyethylene component of total knee prostheses - a finite element analysis. Clin Biomech 2002, 17(2):140-146.
21. Liau J., et al. The influence of inserting a Fuji pressure sensitive film between the tibiofemoral joint of knee prosthesis on actual contact characteristics. Clin Biomech 2001, 16(2):160-166.
22. Bougherara H., et al. The biomechanics of a validated finite element model of stress shielding in a novel hybrid total knee replacement. Proc Inst Mech Eng H: J Eng Med 2010, 224(10):1209-1219.
23. Montgomery D.C., Runger G.C. Applied statistics and probability for engineers 2010, Wiley.
24. Bahraminasab M., et al. Aseptic loosening of femoral components - a review of current and future trends in materials used. Mater Des 2012, 42:459-470.
25. Noorossana R., Ardakani M.K. A weighted metric method to optimize multi-response robust problems. J Ind Eng Int 2009, 5:10-19.
26. Bartel D., Bicknell V., Wright T. The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. J Bone Joint Surg 1986, 68(7):1041-1051.
27. Sathasivam S., Walker P. The conflicting requirements of laxity and conformity in total knee replacement. J Biomech 1999, 32(3):239-247.
28. Van Loon C.J.M., et al. Distal femoral bone mineral density after total knee arthroplasty: a comparison with general bone mineral density. Arch Orthop Trauma Surg 2001, 121(5):282-285.
29. Petersen M.M., et al. Decreased bone density of the distal femur after uncemented knee arthroplasty. A 1-year follow-up of 29 knees. Acta Orthop Scand 1996, 67(4):339-344.
30. Seki T., et al. Is bone density in the distal femur affected by use of cement and by femoral component design in total knee arthroplasty?. J Orthop Sci 1999, 4(3):180-186.
31. Chong D.Y., Hansen U.N., Amis A.A. Analysis of boneâ€"prosthesis interface micromotion for cementless tibial prosthesis fixation and the influence of loading conditions. J Biomech 2010, 43(6):1074-1080.
32. Willing R., Kim I.Y. Three dimensional shape optimization of total knee replacements for reduced wear. Struct Multidiscip Optim 2009, 38(4):405-414.
33. Dowson D., Harding R.T. The wear characteristics of ultra high molecular weight polyethylene against a high density alumina ceramic under wet (distilled water) and dry conditions. Wear 1982, 75:313-331.
34. Maxian T.A., et al. 3-Dimensional sliding/contact computational simulation of total hip wear. Clin Orthop Relat Res 1996, 333:41-50.