Integrated Design of Multiscale, Multifunctional Materials and Products

Integrated Design of Multiscale, Multifunctional Materials and Products

Volumn , Issue , 2010, Pages

  McDowell, David L ^e   Panchal, Jitesh H ^a   Choi, Hae Jin ^b   Seepersad, Carolyn Conner ^c   Allen, Janet K ^d   Mistree, Farrokh ^e  

^a Washington State University   (United States)

^b NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

^c UNIVERSITY OF TEXAS AT AUSTIN   (United States)

^d ASME   (United States)

^e NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85014268468     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2009-0-20058-4     Document Type: Book

References (480)

1. Ashby M.F. Materials Selection in Mechanical Design 1999, Butterworth-Heinemann, Oxford, UK.
2. Chen W., Allen J.K., Mistree F. A robust concept exploration method for enhancing productivity in concurrent systems design. Concurrent Eng. Res. Appl. 1997, 5(3):203-217.
3. Gero J.S. Design prototypes: a knowledge representation schema for design. AI Mag. 1990, 11(4):26-36.
4. Granta Design Limited, 2007. Granta Material Intelligence Software, <>. http://www.grantadesign.com/products/mi/.
5. Kalsi, M., Hacker, K., Lewis, K., 1999. A comprehensive robust design approach for decision trade-offs in complex systems. ASME Design Automation Conference, Las Vegas, Nevada. Paper Number: DETC99/DAC-8589.
6. McDowell, D.L., Story, T.L., 1998. New directions in materials design science and engineering (MDS&E). Report of a NSF DMR-sponsored workshop, October 19-21, Georgia Institute of Technology and Morehouse College, Atlanta, GA.
7. Mistree F., Hughes O.F., Bras B.A. The compromise decision support problem and the adaptive linear programming algorithm. Structural Optimization: Status and Promise 1993, 247-286. AIAA, Washington, DC. M.P. Kamat (Ed.).
8. Muster D., Mistree F. The decision support problem technique in engineering design. Int. J. Appl. Eng. Educ. 1988, 4(1):23-33.
9. Needleman A., Rice J.R. Plastic creep flow effects in the diffusive cavitation of grain-boundaries. Acta Metall. 1980, 28(10):1315-1332.
10. Norton R.L. Machine Design: An Integrated Approach 2006, Pearson Education, Upper Saddle River, NJ.
11. Olson G.B. Computational design of hierarchically structured materials. Science 1997, 277(5330):1237-1242.
12. Olson G.B. Designing a new material world. Science 2000, 288(5468):993-998.
13. Pahl G., Beitz W. Engineering Design: A Systematic Approach 1996, K. Wallace, trans., Springer, New York.
14. Panchal, J.H., Choi, H.-J., Allen, J.K., McDowell, D.L., Mistree, F., 2006. Designing design processes for integrated materials and products realization: A multifunctional energetic structural materials example. Design Automation Conference, Philadelphia, PA. Paper Number: DETC2006-99449.
15. Panchal J.H., Choi H.-J., Allen J.K., McDowell D.L., Mistree F. A systems-based approach for integrated design of materials, products, and design process chains. J. Comput. Aided Mater. Des. 2007, 14(1):265-293.
16. Pollock IV, T.M., Allison, J.E., Backman, D.G., Boyce, M.C., Gersh, M., Holm, E.A., LeSar, R., Long, M., Powell, A.C., Schirra, J.J., Whitis, D.D., Woodward, C., 2008. Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security. National Materials Advisory Board, NAE, National Academies Press Report Number: ISBN-10: 0-309-11999-5.
17. Rolander N., Rambo J., Joshi Y., Allen J.K., Mistree F. Robust design of turbulent convective systems using the proper orthogonal decomposition. ASME J. Mech. Des. Spec. Issue on Robust and Risk-Based Des. 2006, 128:844-855.
18. Seepersad, C.C., 2004. A robust topological preliminary design exploration method with materials design applications. PhD Dissertation, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
19. Seepersad C.C., Pederson K., Emblemsvag J., Bailey R.R., Allen J.K., Mistree F. The validation square: How does one verify and validate a design method?. Decision Making in Engineering Design 2006, American Society of Mechanical Engineers, New York. W. Chen, K. Lewis, L. Schmidt (Eds.).
20. Shigley J.E., Mischke C.R. Mechanical Engineering Design 1989, McGraw-Hill, New York. fifth ed.
21. Taguchi G. Introduction to Quality Engineering 1986, Asian Productivity Organization, Tokyo.
22. Wang A.-J., Kumar R.S., Shenoy M.M., McDowell D.L. Microstructure-based multiscale constitutive modeling of g-g' nickel-base superalloys. Int. J. Multiscale Comput. Eng. 2007, 4(5-6):663-692.
23. Acharjee S., Zabaras N. A non-intrusive stochastic galerkin approach for modeling uncertainty propagation in deformation processes. Comput. Struct. 2007, 85(5-6):244-254.
24. Adams B.L., Henrie A., Henrie B., Lyon M., Kalidindi S.R., Garmestani H. Microstructure-sensitive design of a compliant beam. J. Mech. Phys. Solids 2001, 49(8):1639-1663.
25. Adams B.L., Kalidindi S.R., Fullwood D.T. Microstructure Sensitive Design for Performance Optimization 2005, Brigham Young University Academic Publishing, Provo, UT.
26. Allen J.K., Seepersad C.C., Choi H.-J., Mistree F. Robust design for multiscale and multidisciplinary applications. ASME J. Mech. Des. 2006, 128(4):832-843.
27. Apelian, D., Alleyne, A., Handwerker, C.A., Hopkins, D., Isaacs, J.A., Olson, G.B., Vidyanathan, R., Wolf, S.D., 2004. Accelerating Technology Transition: Bridging the Valley of Death for Materials and Processes in Defense Systems. National Materials Advisory Board, NAE, National Academies Press Report Number: ISBN-10: 0-309-09317-1.
28. Ashby M.F. Materials Selection in Mechanical Design 2005, Butterworth-Heinemann, Oxford, UK.
29. Asta M., Ozolins V., Woodward C. A first-principles approach to modeling alloy phase equilibria. J. Occup. Med. 2001, 53(9):16-19.
30. Backman D.G., Wei D.Y., Whitis D.D., Buczek M.B., Finnigan P.M., Gao D. ICME at GE: Accelerating the insertion of new materials and processes. J. Occup. Med. 2006, 58(11):36-41.
31. Chang T.S., Ward A.C. Conceptual robustness in simultaneous engineering: A formulation in continuous spaces. Res. Eng. Des. 1995, 7(2):67-85.
32. Chang T.S., Ward A.C., Lee J., Jacox E.H. Conceptual robustness in simultaneous engineering: an extension of taguchi's parameter design. Res. Eng. Des. 1994, 6:211-222.
33. Chen C.L.P., Cao Y., LeClair S.R. Materials structure-property prediction using a self-architecting neural network. J. Alloys. Compd. 1998, 279:30-38.
34. Chen W., Lewis K. A robust design approach for achieving flexibility in multidisciplinary design. AIAA J. 1999, 37(8):982-989.
35. Choi S.-K., Grandhi R.V., Canfield R.A. Robust design of mechanical systems via stochastic expansion. Int. J. Mater. Prod. Technol. 2006, 25(1/2/3):127-143.
36. Cregger, S.E., Caiazzo, A., Pugliano, P., Rajagopal, R., Uryasev, S., Accelerated insertion of materials: managing error and uncertainty in structures., 49th International Society for the Advancement of Material and Process Engineering Symposium and Exhibition, 2004, Long Beach, CA, May 17.
37. Cuitino A.M., Stainier L., Wang G., Strachan A., Cagin T., Goddard W.A., Ortiz M. A multiscale approach for modeling crystalline solids. J. Comput. Aided Mater. Des. 2001, 8(2-3):127-149.
38. Cuong N.N., Veroy K., Patera A.T. Certified real-time solutions of parametrized partial differential equations. Handbook of Materials Modeling 2005, 1523-1558. Springer, New York. S. Yip (Ed.).
39. Danielson E., Devenney M., Giaquinta D.M., Golden J.H., Haushalter R.C., McFarland E.W., Poojary D.M., Reaves C.M., Weinberg W.H., Wu X.D. A rare-earth phosphor containing one-dimensional chains identified through combinatorial methods. Science 1998, 279(5352):837-839.
40. Danielson E., Devenney M., Giaquinta D.M., Golden J.H., Haushalter R.C., McFarland E.W., Poojary D.M., Reaves C.M., Weinberg W.H., Wu X.D. X-ray powder structure of Sr2CeO4: a new luminescent material discovered by combinatorial chemistry. J. Mol. Struct. 1998, 470:229-235.
41. Dawson P., Miller M., Han T.-S., Bernier J. An accelerated methodology for the evaluation of critical properties in polyphase alloys. Metall. Mater. Trans. A 2005, 36(7):1627-1641.
42. Du X., Chen W. Methodology for managing the effect of uncertainty in simulation-based systems design. AIAA J. 2000, 38(8):1471-1478.
43. Du X., Chen W. Efficient uncertainty analysis methods for multidisciplinary robust design. AIAA J. 2002, 40:545-552.
44. Gall K., Horstemeyer M.F. Integration of basic materials research into the design of cast components by a multi-scale methodology. J. Eng. Mater. Technol. 2000, 122(3):355-362.
45. Goddard W.A., Cagin T., Blanco M., Vaidehi N., Dasgupta S., Floriano W., Belmares M., Kua J., Zamanakos G., Kashihara S., Iotov M., Gao G. Strategies for multiscale modeling and simulation of organic materials: Polymers and biopolymers. Comput. Theor. Polym. Sci. 2001, 11(5):329-343.
46. Green, M.L., 2007. User-friendly materials databases for the intelligent selection of materials: an industrially responsive materials data center. In Proceedings of the Committee on Integrated Computational Materials Engineering, March 13-14. National Academy of Engineering, Washington, DC. Available at <>. http://www7.nationalacademies.org/nmab/CICME_home_page.html/.
47. Gu X., Renaud J.E., Ashe L.M., Batill S.M., Budhiraja A.S., Krajewski L.J. Decision-based collaborative optimization. ASME J. Mech. Des. 2002, 124(1):1-13.
48. Gu X., Renaud J.E., Batill S.M., Brach R.M., Budhiraja A.S. Worst case propagated uncertainty of multidisciplinary systems in robust design optimization. Struct. Multidiscip. O. 2000, 20(3):190-213.
49. Gu X., Renaud J.E., Penninger C.L. Implicit uncertainty propagation for robust collaborative optimization. ASME J. Mech. Des. 2006, 128(4):1001-1013.
50. Gurdal Z., Haftka R.T., Hajela P. Design and Optimization of Laminated Composite Materials 1999, Wiley, New York.
51. Hahn, G., 2001. Accelerated insertion of materials-composites. DARPA Workshop, Annapolis, MD, August 27-28.
52. Haslam A.J., Moldovan D., Phillpot S.R., Wolf D., Gleiter H. Combined atomistic and mesoscale simulation of grain growth in nanocrystalline thin films. Comput. Mater. Sci. 2002, 23(1-4):15-32.
53. Huynh D.B.P., Patera A.T. Reduced basis approximation and a posteriori error estimation for stress intensity factors. Int. J. Numer. Methods Eng. 2007, 72(10):1219-1259.
54. Hyun S., Torquato S. Optimal and manufacturable two-dimensional, kagome-like cellular solids. J. Mater. Res. 2002, 17(1):137-144.
55. Jackson A., Pawlak Z., LeClair S.R. Rough sets applied to the discovery of materials knowledge. J. Alloy. Compd. 1998, 279:14-21.
56. Jones R.M. Mechanics of Composite Materials 1998, Brunner-Routledge, New York. second ed.
57. Jou H.-J., Voorhees P., Olson G.B., et al. Computer simulations for the prediction of microstructure/property variation in aeroturbine disks. Superalloys 2004 2004, 877-886. The Minerals, Metals, and Materials Society, Warrendale, PA, (proceedings of the 10th International Symposium on Superalloys). K.A. Green (Ed.).
58. Kalidindi S.R., Houskamp J.R., Lyons M., Adams B.L. Microstructure sensitive design of an orthotropic plate subjected to tensile load. Int. J. Plast. 2004, 20(8-9):1561-1575.
59. Kalsi M., Hacker K., Lewis K. A comprehensive robust design approach for decision trade-offs in complex systems design. ASME J. Mech. Des. 2001, 123(1):1-10.
60. Kokkolaras M., Mourelatos Z.P., Papalambros P.Y. Design optimization of hierarchically decomposed multilevel systems under uncertainty. ASME J. Mech. Des. 2006, 128(2):503-508.
61. Kulkarni A.J., Krishnamurthy K., Deshmukh S.P., Mishra R.S. Microstructural optimization of alloys using a genetic algorithm. Mat. Sci. Eng. A 2004, 372(1-2):213-220.
62. Liu H., Chen W., Kokkolaras M., Papalambros P.Y., Kim H.M. Probabilistic analytical target cascading: a moment matching formulation for multilevel optimization under uncertainty. ASME J. Mech. Des. 2006, 128(4):991-1000.
63. Liu W.K., Karpov E.G., Zhang S., Park H.S. An introduction to computational nanomechanics and materials. Comput. Method. Appl. M. 2004, 193(17-20):1529-1578.
64. Liu Z.-K., Chen L.-Q. Integration of first-principles calculations, CALPHAD modeling, and phase-field simulations. Applied Computational Materials Modeling 2007, 171-213. Springer-Verlag, New York. G. Bozzolo, R.D. Noebe, P.B. Abel (Eds.).
65. Liu Z.-K., Chen L.-Q., Raghavan P., Du Q., Sofo J.O., Langer S.A., Wolverton C. An integrated framework for multi-scale materials simulation and design. J. Comput. Aided Mat. Des. 2004, 11:183-199.
66. Liu Z.-K., Chen L.-Q., Rajan K. Linking length scales via materials informatics. J. Occup. Med. 2006, 58(11):42-50.
67. Lu W.F., Deng Y.-M. A system modelling methodology for materials and engineering systems design integration. Mater. Des. 2004, 25(6):459-469.
68. Mavris D.N., Bandte O., DeLaurentis D.A. Robust design simulation: A probabilistic approach to multidisciplinary design. J. Aircr. 1999, 36(1):298-307.
69. McDowell D.L. Simulation-assisted materials design for the concurrent design of materials and products. J. Occup. Med. 2007, 59(9):21-25.
70. McDowell D.L. Viscoplasticity of heterogeneous metallic materials. Mater. Sci. Eng. R 2008, 62(3):67-123.
71. McDowell D.L., Olson G.B. Concurrent design of hierarchical materials and structures. Sci. Model. Simul. 2008, 15(1-3):207-240.
72. McDowell, D.L., Story, T.L., 1998. New directions in materials design science and engineering (MDS&E). Report of a NSF DMR-sponsored workshop, October 19-21.
73. McFarland E.W., Weinberg W.H. Combinatorial approaches to materials discovery. Trends Biotechnol. 1999, 17(3):107-115.
74. Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security 2008, National Materials Advisory Board, National Academies Press, Washington, DC.
75. Oden J.T., Belytschko T., Fish J., Hughes T.J.R., Johnson C., Keyes D., Laub A., Petzold L., Srolovitz D., Yip S. Simulation-based engineering science: revolutionizing engineering science through simulation. A report of the National Science Foundation Blue Ribbon Panel on Simulation-Based Engineering Science 2006, National Science Foundation, Washington, DC.
76. Olson G.B. Computational design of hierarchically structured materials. Science 1997, 277:1237-1242.
77. Olson G.B. Systems design of hierarchically structured materials: advanced steels. J. Comput. Aided Mat. Des. 1997, 4:143-156.
78. Olson G.B. Designing a new material world. Science 2000, 288(5468):993-998.
79. Ortiz M., Cuitino A.M., Knap J., Koslowski M. Mixed atomistic-continuum models of material behavior: the art of transcending atomistics and informing continua. MRS Bull. 2001, 26:216-222.
80. Pollock T.M., Allison J.E., Backman D.G., Boyce M.C., Gersh M., Holm E.A., LeSar R., Long M., Powell IV A.C., Schirra J.J., Whitis D.D., Woodward C. Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security 2008, National Materials Advisory Board, NAE, National Academies Press, Washington, DC, Report Number: ISBN-10: 0-309-11999-5.
81. Rajan K. Materials informatics. Mater. Today 2005, 8(10):38-45.
82. Sankaran S., Zabaras N. A maximum entropy approach for property prediction of random microstructures. Acta. Mater. 2006, 54:2265-2276.
83. Shenderova O.A., Brenner D.W., Nazarov A.A., Romano A.E., Yang L.H. Multiscale modeling approach for calculating grain-boundary energies from first principles. Phy. Rev. B 1998, 57(6):R3181-R3184.
84. Sigmund O. Materials with prescribed constitutive parameters: an inverse homogenization problem. Int. J. Solids Struct. 1994, 31(17):2313-2329.
85. Sigmund O. Tailoring materials with prescribed elastic properties. Mech. Mater 1995, 20(4):351-368.
86. Sigmund O. A new class of extremal composites. J. Mech. Phys. Solids 2000, 48(2):397-428.
87. Sigmund O., Torquato S. Design of materials with extreme thermal expansion using a three-phase topology optimization method. J. Mech. Phys. Solids 1997, 45(6):1037-1067.
88. Subbarayan G., Raj R. A methodology for integrating materials science with system engineering. Mat. Des. 1999, 20:1-12.
89. Suh C., Rajagopalan A., Li X., Rajan K. Combinatorial materials design through database science. Mater. Res. Soc. Symp. Proc. 2003, 804:333-342.
90. van de Walle A., Ghosh G., Asta M. Ab initio modeling of alloy phase equilibria. Applied Computational Materials Modeling 2007, 1-34. Springer-Verlag, New York. G. Bozzolo, R.D. Noebe, P.B. Abel (Eds.).
91. Villars P., Brandenburg K., Berndt M., LeClair S.R., Jackson A., Pao Y.-H., Igelnik B., Oxley M., Bakshi B., Chen P., Iwata S. Interplay of large materials databases, semi-empirical methods, neuro-computing, and first-principle calculations for ternary compound former/nonformer prediction. Eng. Appl. Artif. Intel. 2000, 13:497-505.
92. Wang M.Y., Zhou S. Synthesis of shape and topology of multi-material structures with a phase-field method. J. Comput. Aided Mat. Des. 2004, 11(2-3):117-138.
93. Wang Y., Liu Z.-K., Chen L.-Q. Thermodynamic properties of Al, Ni, NiAl, and Ni3Al from first-principles calculations. Acta. Mater 2004, 52(9):2665-2671.
94. Yin, X., Lee, S., Chen, W., Liu, W.K., Horstemeyer, M.F., 2008. A multiscale design approach with random field representation of material uncertainty. ASME IDETC/CIE, Advances in Design Automation Conference, New York. Paper Number: DETC2008-49560.
95. Zabaras, N., 2006. Advanced computational techniques for Materials-by-Design. Joint Contractors Meeting of the AFOSR Applied Analysis and Computational Mathematics Programs, Long Beach, CA, August 7-11.
96. Zohdi T.I. Constrained inverse formulations in random material design. Com. Meth. Appl. Mech. Eng. 2003, 192(28-30):3179-3194.
97. Allen J.K., Seepersad C.C., Choi H.-J., Mistree F. Robust design for multidisciplinary and multiscale applications. ASME J. Mech. Design. 2006, 128(4):832-843.
98. Austin R.A., McDowell D.L., Benson D.J. Numerical simulation of shock wave propagation in spatially resolved microscale particle systems. Model. Simul. Mater. Sci. Eng. 2006, 14:537-561.
99. Benson D.J. A multi-material eulerian formulation for the efficient solution of impact and penetration problems. Comput. Mech. 1995, 15:558-571.
100. Box G.E.P. Robustness in the strategy of scientific model building. Robustness in Statistics 1979, 201-235. Academic Press, New York. R.L. Launer, G.N. Wilkinson (Eds.).
101. Bradley S.R., Agogino A.M. An intelligent real-time design methodology for component selection: An approach to managing uncertainty. J. Mech. Des. 1994, 116:980-988.
102. Chen, W., 1995. A Robust Concept Exploration Method for Configuring Complex Systems. Ph.D. dissertation, Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
103. Chen W., Allen J., Tsui K.-L., Mistree F. A procedure for robust design: Minimizing variations caused by noise factors and control factors. ASME J. Mech. Des. 1996, 118(4):478-485.
104. Chen W., Allen J.K., Mistree F. A robust concept exploration method for enhancing productivity in concurrent systems design. Concurrent Eng-Res. A. 1997, 5(3):203-217.
105. Choi, H.-J., 2005. A Robust Design Method for Model and Propagated Uncertainty. Ph.D. dissertation, The GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
106. Choi, H.-J., Austin, R., Allen, J.K., McDowell, D.L., Mistree, F., 2004. An approach for robust micro-scale materials design under unparameterizable variability. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY. Paper Number: AIAA-2004-4331.
107. Choi H.-J., Austin R., Allen J.K., McDowell D.L., Mistree F. An approach for robust design of reactive powder metal mixtures based on non-deterministic micro-scale shock simulation. J. Comput-Aided Mater. Des. 2005, 12(1):57-85.
108. Choi, H.-J., Panchal, J. H., Rosen, D. W., Allen, J. K., Mistree, F. 2003. Towards a standardized engineering framework for distributed collaborative product realization. ASME 2003 Design Engineering Technical Conferences, Chicago, IL. Paper Number: DETC2003/CIE-48279.
109. Cochran, J.K., Lee, K.J., McDowell, D.L., Sanders, T.H., 2000. Low-density monolithic metal honeycombs by thermal chemical processing. 4th Conference on Aerospace Materials, Processes, and Environmental Technology, Huntsville, AL.
110. Daxner T., Rammerstorfer F.G., Böhm H.J. Adaptation of density distributions for optimising aluminium foam structures. Mater. Sci. Tech. 2000, 16(7-8):935-939.
111. Evans A.G., Hutchinson J.W., Fleck N.A., Ashby M.F., Wadley H.N.G. The topological design of multifunctional cellular materials. Prog. Mater. Sci. 2001, 46(3-4):309-327.
112. Gibson L.J., Ashby M.F. Cellular Solids: Structure and Properties 1997, Cambridge University Press, Cambridge, UK.
113. Hasan O.A., Boyce M.C. A constitutive model for the nonlinear viscoelastic viscoplastic behavior of glassy polymers. Polym. Eng. Sci. 1995, 35(4):331-344.
114. Hayes A.M., Wang A., Dempsey B.M., McDowell D.L. Mechanics of linear cellular alloys. Mech. Mater. 2004, 36(8):692-713.
115. Howard R. Information value theory. IEEE Trans. Syst. Sci. Cybern. 1966, SSC-2(1):779-783.
116. Isukapalli S.S., Roy A., Georgopoulos P.G. Stochastic response surface methods (SRSM) for uncertainty propagation: Application to environmental and biological systems. Risk Anal. 1998, 18(3):351-363.
117. Klepaczko J.R., Sasaki T., Kurokawa T. On rate sensitivity of polycrystalline aluminum at high strain rates. Trans. Jpn. Soc. Aerosp. Sci. 1993, 36(113):170-187.
118. Lawrence D.B. The Economic Value of Information 1999, Springer, New York.
119. Lu T.J. Heat transfer efficiency of metal honeycombs. Int. J. Heat Mass Transf. 1999, 42(11):2031-2040.
120. Merzhanov A.G. On critical conditions for thermal explosion of a hot spot. Combust. Flame 1966, 10:341-348.
121. Mistree F., Hughes O.F., Bras B.A. The compromise decision support problem and the adaptive linear programming algorithm. Structural optimization: Status and promise 1993, 247-286. AIAA, Washington, DC. M.P. Kamat (Ed.).
122. Mistree, F., Seepersad, C.C., Dempsey, B.M., McDowell, D.L., 2002. Robust concept exploration methods in materials design. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Paper Number: AIAA-2002-5568.
123. Olson G.B. Computational design of hierarchically structured materials. Science 1997, 277:1237-1242.
124. Panchal, J.H., Chamberlain, M., Rosen, D.W., Allen, J., Mistree, F., 2002. A service-based architecture for information and asset utilization in distributed product realization. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Paper Number: AIAA-2002-5480.
125. Panchal, J.H., Choi, H.-J., Allen, J.K., McDowell, D.L., Mistree, F., 2006. Designing design processes for integrated materials and products realization: a multifunctional energetic structural materials example. Design Automation Conference, Philadelphia, PA. Paper Number: DETC2006-99449.
126. Panchal J.H., Choi H.-J., Allen J.K., McDowell D.L., Mistree F. A systems based approach for integrated design of materials, products, and design process chains. J. Comput-Aided Mater. Des. 2007, 14:265-293.
127. Panchal J.H., Paredis C.J.J., Allen J.K., Mistree F. A value-of-information based approach to simulation model refinement. Eng. Optimiz. 2007, 40(3):223-251.
128. Seepersad C.C., Kumar R.S., Allen J.K., Mistree F., McDowell D.L. Multifunctional design of prismatic cellular materials. J. Comput-Aided Mater. Des. 2004, 11(2-3):163-181.
129. Simon H.A. The Sciences of the Artificial 1996, MIT Press, Cambridge.
130. Taguchi G. Introduction to Quality Engineering 1986, Asian Productivity Organization, Tokyo.
131. Taguchi G. Taguchi on Robust Technology Development: Bringing Quality Engineering Upstream 1993, ASME, New York.
132. Formal Engineering Design Synthesis 2001, Cambridge University Press, Cambridge, UK. E.K. Antonsson, J. Cagan (Eds.).
133. Baskaran, E., 1990. A model for the conceptual design of thermal systems: Concurrent decisions in designing the concept., Ph.D. dissertation, Mechanical Engineering Department. University of Houston, Texas.
134. Baskaran E., Bannerot R.B., Mistree F. Hierarchical selection decision support problems in conceptual design. Eng. Optimiz. 1989, 14:207-238.
135. Battelle Memorial Institute and Foresight Nanotech Institute, 2007. Productive nanosystems: A technology roadmap. <>. Accessed October 8, 2008. http://www.foresight.org/roadmaps/.
136. Braha D., Maimon O. The design process: Properties, paradigms and structure. IEEE Trans. Syst. Man Cybern. A Syst. Hum. 1997, 27(2):146-166.
137. Buede D.M. The Engineering Design of Systems: Models and Methods 2000, Wiley, New York.
138. Cagan J., Campbell M.I., Finger S., Tomiyama T. A framework for computational design synthesis: model and applications. J. Comp. Inf. Sci. Eng. 2005, 5(3):171-181.
139. Engineering Design Synthesis: Understanding, Approaches, and Tools 2002, SpringerVerlag, London. A. Chakrabarti (Ed.).
140. Chung L. Composite materials for vibration damping. Composite Materials: Functional Materials for Modern Mechnologies 2003, 245-252. Springer, New York.
141. Evbuomwan N.F.O., Sivaloganathan S., Jebb A. A survey of design philosophies, models, methods, and systems. Proc. Inst. Mech. Eng. 1996, 210:301-319.
142. Gero J.S. Design prototypes: A knowledge representation schema for design. AI Mag. 1990, 11(4):26-36.
143. Granta Design Limited, 2007. Granta material intelligence software. <>. http://www.grantadesign.com/products/mi/.
144. Hazelrigg G. Systems Engineering: An Approach to Information-Based Design 1996, Prentice Hall, Upper Saddle River, NJ.
145. Hazelrigg G.A. A framework for decision-based engineering design. J. Mech. Design 1998, 120(4):653-658.
146. Kamal, S.Z., 1990. The development of heuristic decision support problems for adaptive design. Ph.D. dissertation, Department of Mechanical Engineering, University of Houston, Texas.
147. Karandikar H., Mistree F. Modeling concurrency in the design of composite structures. Structural Optimization: Status and Promise 1993, 769-806. AIAA, Washington, DC. M.P. Kamat (Ed.).
148. Karandikar H.M., Mistree F. Tailoring composite materials through optimal selection of their constituents. J. Mech. Design 1992, 114(3):451-458.
149. Keeney R.L., Raiffa H. Decisions with Multiple Objectives: Preferences and Value Tradeoffs 1976, Wiley, New York.
150. Maher M.L. Process models for design synthesis. AI Mag. 1990, 11(4):49-58.
151. Marston M., Allen J.K., Mistree F. The decision support problem technique: integrating descriptive and normative approaches. Eng. Valuation and Cost Anal. Spec. Issue on Decis. 2000, 3:107-129. Based Design: Status and Promise.
152. Marston, M., Mistree, F., 1997. A decision-based foundation for systems design: A conceptual exposition. CIRP 1997 International Design Seminar Proceedings on Multimedia Technologies for Collaborative Design and Manufacturing. University of Southern California, Los Angeles.
153. Messer, M., Panchal, J.H., Allen, J.K., McDowell, D.L., Mistree, F., 2007. A function-based approach for integrated design of materials and products concepts. ASME Design Automation Conference, Las Vegas: NV Paper Number: DETC2007/DAC-35743.
154. Mistree F., Smith W.F., Bras B.A., Allen J.K., Muster D. Decision-based design: A contemporary paradigm in ship design. Trans. Soc. Naval Arch. Marine Eng. 1990, 98:565-597.
155. Mistree F., Smith W.F., Kamal S.Z., Bras B.A. Designing decisions: Axioms, models, and marine applications. Fourth International Marine Systems Design Conference 1991, 1-24. Society of Naval Architects of Japan, Kobe, Japan.
156. Muster D., Mistree F. The decision support problem technique in engineering design. Int. J. Appl. Eng. Edu. 1988, 4(1):22-33.
157. Olson G.B. Computational design of hierarchically structured materials. Science 1997, 277:1237-1242.
158. Olson G.B. Designing a new material world. Science 2000, 288(5468):993-998.
159. Pahl G., Beitz W. Engineering Design: A Systematic Approach 1996, Springer-Verlag, New York. second ed.
160. Pahl G., Wallace K. Using the concept of functions to help synthesize solutions. Engineering Design Synthesis: Understanding, Approaches, and Tools 2002, 102-120. SpringerVerlag, London. A. Chakrabarti (Ed.).
161. Roozenburg N.F.M. Defining synthesis: on the senses and the logic of design synthesis. Engineering Design Synthesis: Understanding, Approaches, and Tools 2002, Springer-Verlag, London. A. Chakrabarti (Ed.).
162. Roth K. Design catalogues and their usage. Engineering Design Synthesis: Understanding, Approaches, and Tools 2002, 121-130. SpringerVerlag, London. A. Chakrabarti (Ed.).
163. Sambu S., Chen Y., Rosen D. Geometric tailoring: A design for manufacturing method for rapid prototyping and rapid tooling. ASME J. Mech. Design 2004, 126(4):571-580.
164. Sambu, S., 2001. A design for manufacture method for rapid prototyping and rapid tooling, M.S. thesis, GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
165. Seepersad, C.C., 2001. A utility-based compromise decision support problem with applications in product platform design, M.S. thesis, GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
166. Shimomura Y., Yoshioka M., Takeda H., Umeda Y., Tomiyama T. Representation of design object based on the functional evolution process model. J. Mech. Design 1998, 120(2):221-229.
167. Simon H.A. The Sciences of the Artificial 1996, MIT Press, Cambridge, MA.
168. Smalley R.E. Of chemistry, love, and nonobots. Sci. Am. 2001, 285:76-77.
169. Suh N.P. Principles of Design 1990, Oxford University Press, Oxford, UK.
170. Thurston, D.L., 1999. Real and perceived limitations to decision-based design. ASME DETC, Design Theory and Methodology, Las Vegas, NV. Paper Number: DETC99/DTM-8750.
171. Von Neumann J., Morgenstern O. The Theory of Games and Economic Behavior 1947, Princeton University Press, Princeton, NJ.
172. Wood K.L., Greer J.L. Function-based synthesis methods in engineering design. Formal Engineering Design Synthesis 2001, 170-227. Cambridge University Press, Cambridge, UK. E.K. Antonsson, J. Cagan (Eds.).
173. Darms, S.J., 1963. Optimum design of filament-wound rocket motor cases. Directorate of Materials and Processes, Aeronautical Systems Division, Wright Patterson AFB. Report Number: ASD-TDR-63-396.
174. Fernández M.G., Seepersad C.C., Rosen D., Allen J.K., Mistree F. Decision support in concurrent engineering: the utility-based selection decision support problem. Concurrent Eng.-Res. A. 2005, 13(1):13-28.
175. Karandikar H.M., Mistree F. An approach for concurrent and integrated material selection and dimensional synthesis. J. Mech. Design 1992, 114:633-641.
176. Lark, R.F., 1977, Recent advances in lightweight, filament-wound composite pressure vessel technology. In: Composites in pressure vessels and piping, ASME Energy Technology Conference, Houston, TX, pp. 17-49.
177. Puck A., Schneider W. On the failure mechanisms and failure criteria of filament-wound glass-fibres in composites. Plast. Polym. 1969, 37:33-44.
178. Riggs J.S. Engineering Economics 1977, McGraw-Hill, New York.
179. Seepersad, C.C., 2001. The utility-based compromise decision support problem with applications in product platform design, M.S., thesis, The GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology.
180. Seepersad C.C., Mistree F., Allen J.K. Designing evolving families of products using the utility-based compromise decision support problem. Int. J. Mass Customisation 2005, 1(1):37-64.
181. Andradottir S. Simulation Optimization. Handbook of Simulation 1998, Wiley and Sons, Inc., NY. E. John (Ed.).
182. Austin, R., 2005, "Numerical Simulation of the Shock Compression of Microscale Reactive Particle Systems", M.S. Thesis, Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta.
183. Ayyub B.M., Chao R.-J. Uncertainty Modeling in Civil Engineering with Structural and Reliability Applications. Uncertainty Modeling and Analysis in Civil Engineering 1997, 3-32. New York, CRC Press. B.M. Ayyub (Ed.).
184. Belegundu A.D., Zhang S. Robustness of Design through Minimum Sensitivity. Journal of Mechanical Design 1992, 114:213-217.
185. Bisgaard S., Ankenman B. Analytic Parameter Design. Quality Engineering 1995, 8:75-91.
186. Bocchini G.F. The Influence of Porosity on the Characteristics of Sintered Materials. The International Journal of Powder Metallurgy 1986, 22(3):185-202.
187. Borror C.M., Montgomery D.C. Mixed Resolution Designs as Alternatives to Taguchi Inner/Outer Array Designs for Robust Design Problems. Quality and Reliability International 2000, 16:117-127.
188. Box G. Signal-to-Noise Ratios, Performance Criteria, and Transformations. Technometrics 1988, 30:1-18.
189. Bras B.A., Mistree F. Robust Design Using Compromise Decision Support Problems. Engineering Optimization 1993, 2(3):213-239.
190. Byrne D.M., Taguchi S. The Taguchi Approach to Parameter Design. Quality Progress 1987, 20(12):19-26.
191. Cagan J., Williams B.C. First-Order Necessary Conditions for Robust Optimality. ASME Advances in Design Automation 1993, Vol. 65-1:539-549. ASME DE, Albuquerque, NM.
192. Chen, W., 1995, "A Robust Concept Exploration Method for Configuring Complex Systems", PhD Dissertation, G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
193. Chen W., Allen J.K., Mavris D., Mistree F. A Concept Exploration Method for Determining Robust Top-Level Specifications. Engineering Optimization 1996, 26(2):137-158.
194. Chen W., Allen J.K., Tsui K.-L., Mistree F. A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors. ASME Journal of Mechanical Design 1996, 118(4):478-485.
195. Chen W., Atul S., Messac A., Sundararaj G. Exploration of the Effectiveness of Physical Programming in Robust Design. ASME Journal of Mechanical Design 2000, 122(2):155-163.
196. Chen, W., Simpson, T. W., Allen, J. K., and Mistree, F., 1996, "Using Design Capability Indices to Satisfy a Ranged Set of Design Requirements", in Advances in Design Automation, Irvine, CA, pp. ASME Paper no. 96-DETC/DAC-1090.
197. Chen W., Simpson T.W., Allen J.K., Mistree F. Satisfying Ranged Sets of Design Requirements Using Design Capability Indices as Metrics. Engineering Optimization 1999, 31:615-639.
198. Chen W., Wiecek M., Zhang J. Quality Utility: A Compromise Programming Approach to Robust Design. Journal of Mechanical Design 1999, 121:179-187.
199. Chen W., Yuan C. A Probabilistic-Based Design Model for Achieving Flexibility in Design. ASME Journal of Mechanical Design 1999, 121(1):77-83.
200. Choi H.-J., Austin R., Allen J.K., McDowell D.L., Mistree F., Benson D.J. An Approach for Robust Design of Reactive Powder Metal Mixtures Based on Non-deterministic Micro-Scale Shock Simulation. Journal of Computer-Aided Materials Design 2005, 12(1):57-85.
201. Choi S.-K., Grandhi R.V., Canfield R.A. Robust Design of Mechanical Systems via Stochastic Expansion. International Journal of Materials and Product Technology 2006, 25(1/2/3):127-143.
202. Clausing D., Frey D.D. Improving Systems Reliability by Failure-Mode-Avoidance Including Four Concept Design Strategies. Systems Engineering (INCOSE) 2005, 8(3):245-261.
203. Cregger, S. E., Caiazzo, A., Pugliano, P., Rajagopal, R., and Uryasev, S., 2004 (May 17), "Accelerated Insertion of Materials-Managing Error and Uncertainty in Structures", in 49th International Society for the Advancement of Material and Process Engineering Symposium and Exhibition, Long Beach, CA.
204. Cuong N.N., Veroy K., Patera A.T. Certified Real-Time Solutions of Parametrized Partial Differential Equations. Handbook of Materials Modeling 2005, 1523-1558. Springer. S. Yip (Ed.).
205. Der Kiureghian A. Measures of Structural Safety under Imperfect State of Knowledge. J. Structural Eng 1989, 115(5):1119-1139.
206. Du X., Chen W. Towards a Better Understanding of Modeling Feasibility Robustness in Engineering Design. Journal of Mechancial Design 2000, 122:385-394.
207. Du X., Chen W. Efficient Uncertainty Analysis Methods for Multidisciplinary Robust Design. AIAA Journal 2002, 40(3):545-552.
208. Ford J.M., Bloebaum C.L. Decomposition Method for Concurrent Design of Mixed Discrete/Continuous Systems 1993, ASME, New York, NY, USA, Albuquerque, NM, USA, pp. 367-376.
209. Frey, D. D. and Li, X., 2004, "Validating Robust Parameter Design Methods", in ASME Design Technical Conferences, Salt Lake City, UT, pp. Paper Number DETC2004-57518.
210. Gu X., Renaud J.E., Batill S.M., Brach R.M., Budhiraja A.S. Worst Case Propagated Uncertainty of Multidisciplinary Systems in Robust Design Optimization. Structural and Multidisciplinary Optimization 2000, 20(3):190-213.
211. Hahn, G., 2001 (August 27-28), "Accelerated Insertion of Materials-Composites", in DARPA Workshop, Annapolis, MD.
212. Haukass T. Types of Uncertainties, Elementary Data Analysis, Set Theory, Reliability and Structural Safety, Lecture Notes 2003, University of British Columbia.
213. Hernandez G., Simpson T.W., Allen J.K., Bascaran E., Avila L.F., Salinas R.F. Robust Design Modeling of Products and Families. Journal of Mechanical Design 2001, 123(2):183-190.
214. Huynh D.B.P., Patera A.T. Reduced Basis Approximation and A Posteriori Error Estimation for Stress Intensity Factors. International Journal of Numerical Methods in Engineering 2007, 72(10):1219-1259.
215. Hyung Min K., Michelena N.F., Papalambros P.Y., Tao J. Target cascading in optimal system design, Transactions of the ASME. Journal of Mechanical Design 2003, 125(3):474-480.
216. Hyung Min K., Rideout D.G., Papalambros P.Y., Stein J.L. Analytical target cascading in automotive vehicle design, Transactions of the ASME. Journal of Mechanical Design 2003, 125(3):481-489.
217. Isukapalli S.S., Roy A., Georgopoulos P.G. Stochastic Response Surface Methods (SRSMs) for Uncertainty Propagation: Application to Environmental and Biological Systems. Risk Analysis 1998, 18(3):351-363.
218. Joseph V.R., Wu C.F.J. Operating Windows Experiments: A Novel Approach to Quality Improvement. Journal of Quality Technology 2002, 34:345-354.
219. Koch, P. N., 1997, "Hierarchical Modeling and Robust Synthesis for the Preliminary Design of Large Scale Complex Systems", PhD Dissertation, The G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
220. Koch P.N., Allen J.K., Mistree F., Mavris D. The Problem of Size in Robust Design. ASME Advances in Design Automation 1997, ASME, Sacramento, CA, Paper Number: DETC97/DAC-3983.
221. Koch P.N., Mavris D., Mistree F. Multi-level, Partitioned Response Surfaces for Modeling Complex Systems. AIAA Journal 2000, 38(5):875-881.
222. Koehler J.R., Owen A.B. Computer Experiments. Handbook of Statistics 1996, 261-308. Elsevier Science, NY. S. Ghosh, C.R. Rao (Eds.).
223. Kunert, J., Auer, C., Erdbrugge, M., Gobel, R., 2005. An Experiment to Compare the Combined Array and the Product Array for Robust Parameter Design. Journal of Quality Technology pp. (in press).
224. Leon R.V., Shoemaker A.C., Kacker R.N. Performance measures independent of adjustment: an explanation and extension of Taguchi's signal-to-noise ratios (with discussions). Technometrics 1987, 29(3):253-285.
225. Liu H., Chen W., Kokkolaras M., Papalambros P.Y., Kim H.M. Probabilistic analytical target cascading: A moment matching formulation for multilevel optimization under uncertainty, Journal of Mechanical Design. Transactions of the ASME 2006, 128(4):991-1000.
226. Liu J.S. Monte Carlo Strategies in Scientific Computing 2001, Springer, NY.
227. Mavris D.N., Bandte O., DeLaurentis D.A. Robust Design Simulation: A Probabilistic Approach to Multidisciplinary Design. Journal of Aircraft 1999, 36(1):298-307.
228. McKay M.D., Beckman R.J., Conover W.J. A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code. Quality Engineering 1979, 11(3):417-425.
229. Michelena N.F., Agogino A.M. Formal Solution of N-Type Robust Parameter Design Problems with Stochastic Noise Factors. Journal of Mechanical Design 1994, 116:501-507.
230. Mourelatos, Z. P. and Liang, J., 2005, "A Methodology for Trading-Off Performance and Robustness under Uncertainty", in ASME Design Technical Conferences, Long Beach, CA, pp. Paper Number DETC2005/DAC-85019.
231. Murphy T.E., Tsui K.-L., Allen J.K. A Review of Robust Design Methods for Multiple Responses. Research in Engineering Design 2005, 15:201-215.
232. Myers R.H., Montgomery D.C. Response Surface Methodology: Process and Product Optimization Using Designed Experiments 1995, Wiley, New York.
233. Nair V.N. Taguchi's Parameter Design: A Panel Discussion. Technometrics 1992, 34:127-161.
234. Nikolaidis E. Types of Uncertainty in Design Decision Making. Enigneering Design Reliability Handbook 2005, 8.1-8.20. CRC Press, New York. E. Nikolaidis, D.M. nGhiocel, S. Singhal (Eds.).
235. Oberkampf, W. L., DeLand, S. M., Rutherford, B. M., Diegert, K. V., and Alvin, K. F., 1999, "A New Methodology for the Estimation of Total Uncertainty in Computational Simulation", in AIAA, pp. 99-1612. Paper Number: Paper Number 99-1612.
236. Olwenik A., Brauen T., Ferguson S., Lewis K. A Framework for Flexible Systems and Its Implementation in Multiattribute Decision Making. Journal of Mechancial Design 2004, 126:412-419.
237. Otto K.N., Antonsson E.K. Extensions to the Taguchi Method of Product Design. ASME Journal of Mechanical Design 1993, 115(1):5-13.
238. Pareto, V., 1909, Manuel D'Economie Politique.
239. Parkinson A., Sorensen C., Pourhassan N. A General Approach for Robust Optimal Design. ASME Journal of Mechanical Design 1993, 115(1):74-80.
240. Parkinson A., Sorensen C., Pourhassan N. General approach for robust optimal design. Transactions of the ASME 1993, 115(1):74-80.
241. Phadke M.S. Quality Engineering Using Robust Design 1989, Prentice Hall, Englewood Cliffs, NJ.
242. Ramakrishnan B., Rao S.S. A General Loss Function Based Optimization Procedure for Robust Design. Engineering Optimization 1996, 25:255-276.
243. Sandgren E., Cameron T.M. Robust Design Optimization of Structures through Consideration of Variation. Computers and Structures 2002, 80(20-21):1605-1613.
244. Sankaran S., Zabaras N. A Maximum Entropy Approach for Property Prediction of Random Microstructures. Acta Materialia 2006, 54:2265-2276.
245. Santner T.J., Williams B.J., Notz W.I. The Design and Analysis of Computer Experiments 2003, Springer, New York.
246. Schmit L.A., Mehrinfar M. Multilevel Optimum Design of Structures with Fiber-composite Stiffened-panel Components. AIAA Journal 1982, 20(1):138-147.
247. Seepersad, C. C., 2004, "A Robust Topological Preliminary Design Exploration Method with Materials Applications", PhD Dissertation, The G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
248. Seepersad C.C., Allen J.K., McDowell D.L., Mistree F. Robust Design of Cellular Materials with Topological and Dimensional Imperfections. ASME Journal of Mechanical Design 2006, 128(6):1285-1297.
249. Shoemaker A.C., Tsui K.-L., Wu C.F.J. Economical Experimentation Methods for Robust Design. Technometrics 1991, 33:415-427.
250. Simpson, T. W., 1996, "A Concept Exploration Method for Product Family Design", PhD Dissertation, The G.W. Woodruff School of Mechanical Engineering, Atlanta, GA.
251. Simpson T.W., Chen W., Allen J.K., Mistree F. Use of the Robust Concept Exploration Method to Facilitate the Design of a Family of Products. Simultaneous Engineering: Methodologies and Applications 1999, 247-278. Gordon and Breach Science Publishers, Amsterdam, The Netherlands. U. Roy, J.M. Usher, H.R. Parsaei (Eds.).
252. Simpson T.W., Maier J.R.A., Mistree F. Product Platform Design: Method and Applications. Research in Engineering Design: Method and Application 2001, 13:2-22.
253. Simpson T.W., Peplinski J.D., Koch P.N., Allen J.K. Metamodels for Computer-based Engineering Design: Survey and Recommendations. Engineering with Computers 2001, 17:129-150.
254. Simpson T.W., Seepersad C.C., Mistree F. Balancing Commonality and Performance within the Concurrent Design of Multiple Products in a Product Family. Concurrent Engineering: Research and Applications (CERA) 2001, 9(3):177-190.
255. Sobieszczanski-Sobieski J., James B.B., Riley M.F. Structural Sizing by Generalized, Multilevel Optimization. AIAA Journal 1987, 25(1):139-145.
256. Sobieszczanski-Sobieski J., Kodiyalam S. BLISS/S: A new method for two-level structural optimization. Structural and Multidisciplinary Optimization 2001, 21(1):1-13.
257. Su J., Renaud J.E. Automatic Differentiation in Robust Optimization. AIAA Journal 1997, 36(6):1072-1079.
258. Sundaresan S., Ishii K., Houser D.R. Robust optimization procedure with variations on design variables and constraints. Engineering Optimization 1995, 24(2):101-109.
259. Torquato S. Random heterogeneous media: microstructure and improved bounds on effective properties. Applied Mechanics Review 1991, 44:37-76.
260. Tsui K.-L. An Overview of Taguchi Method and Newly Developed Statistical Methods for Robust Design. IIE Transactions 1992, 24(5):44-57.
261. Vining G.G., Myers R.H. Combining Taguchi and Response Surface Philosophies: A Dual Response Approach. J Quality Technology 1990, 22:38-45.
262. Welch J.T., Yu T.K., Kand S.M., Sachs J. Computer Experiments for Quality Control by Parameter Design. Journal of Quality Technology 1990, 22:15-22.
263. Wu C.F.J., Zhu Y. Optimal Selection of Single Arrays for Parameter Design Experiments. Statistica Sinica 2003, 13:1179-1199.
264. Wu C.F.J.H. MExperiments: Planning, Analysis and Parameter Design Optimization 2000, John Wiley and Sons, New York.
265. Wujek B.A., Renaud J.E., Batill S.M., Brockman J.B. Concurrent subspace optimization using design variable sharing in a distributed computing environment. Concurrent Engineering: Research and Applications 1996, 4(4):77-361.
266. Yin, X., Lee, S., Chen, W., Liu, W. K., and Horstemeyer, M. F., 2008, "A Multiscale Design Appraoch with Random Field Representation of Material Uncertainty", in ASME IDETC/CIE, Advances in Design Automation Conference, New York, NY, Paper Number: DETC2008-49560.
267. Yu J., Ishii K. Robust Design by Matching the Design with Manufacturing Variation Patterns. ASME Design Automation Conference 1994, Vol. 69-2:7-14. ASME, DE, Minneapolis, MN.
268. Zohdi T.I. Constrained Inverse Formulations in Random Material Design. Computer Methods in Applied Mechanics and Engineering 2003, 192(28-30):3179-3194.
269. Bae, K.-R., Wang, S., Choi, K. K., 2002. Reliability-based topology optimization. In: 9th AIAA/ISSMO symposium on multidisciplinary analysis and optimization. Atlanta, GA. Paper No: AIAA-2002-5542.
270. Bailey J.C., Intile J., Fric T.F., Tolpadi A.K., Nirmalan N.V., Bunker R.S. Experimental and numerical study of heat transfer in a gas turbine combustor liner. International gas turbine conference and exposition 2002, ASME, Amsterdam, Paper Number: GT-2002-30183.
271. Ben-Tal A., Nemirovski A. Robust truss topology design via semidefinite programming. SIAM J. Optim. 1997, 7(4):991-1016.
272. Bocchini G.F. The influence of porosity on the characteristics of sintered materials. Int. J. Powder Metall. 1986, 22(3):185-202.
273. Cherkaev A., Cherkaeva E. Optimal design for uncertain loading conditions. Homogenization 1999, 193-213. World Scientific, Singapore. V. Berdichevsky, V. Jikov, G. Papanicolaou (Eds.).
274. Christiansen S., Patriksson M., Wynter L. Stochastic bilevel programming in structural optimization. Struct. Multidiscip. Optim. 2001, 21:361-371.
275. Diaz A., Bendsoe M.P. Shape optimization of structures for multiple loading situations using a homogenization method. Struct. Optimization 1992, 4(1):17-22.
276. Diaz A., Lipton R., Soto C.A. A new formulation of the problem of optimum reinforcement of Reissner-Mindlin plates. Comput. Method. Appl. M. 1995, 123(1-4):121-139.
277. Dimiduk D.M., Perepezko J.H. Mo-Si-B alloys: Developing a revolutionary turbine-engine material. MRS Bull. 2003, 639-645. September.
278. Dorn W.S., Gomory R.E., Greenberg H.J. Automatic design of optimal structures. J. Mec. 1964, 3:25-52.
279. Evans A.G., Hutchinson J.W., Fleck N.A., Ashby M.F., Wadley H.N.G. The topological design of multifunctional cellular materials. Prog. Mater. Sci. 2001, 46(3-4):309-327.
280. Gibson L.J., Ashby M.F. Cellular Solids: Structure and Properties 1997, Cambridge University Press, Cambridge, UK.
281. Gu S., Lu T.J., Evans A.G. On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity. Int. J. Heat Mass Tran. 2001, 44(11):2163-2175.
282. Hayes A.M., Wang A., Dempsey B.M., McDowell D.L. Mechanics of linear cellular alloys. Mech. Mater. 2004, 36(8):691-713.
283. Hyun S., Torquato S. Effective elastic and transport properties of regular honeycombs for all densities. J. Mater. Res. 2000, 15(9):1985-1993.
284. Hyun S., Torquato S. Optimal and manufacturable two-dimensional, Kagome-like cellular solids. J. Mater. Res. 2002, 17(1):137-144.
285. Incropera F.P., DeWitt D.P. Fundamentals of Heat and Mass Transfer 1996, Wiley, New York. third ed.
286. Kirsch U. Optimal topologies of structures. Appl. Mech. Rev. 1989, 42(8):223-239.
287. Kocvara M., Zowe J., Nemirovski A. Cascading: An approach to robust material optimization. Comput. Struct. 2000, 76(1-3):431-442.
288. Li Q., Steven G.P., Querin O.M. Structural topology design with multiple thermal criteria. Eng. Computation. 2000, 17(6):715-734.
289. Li Q., Steven G.P., Xie Y.M., Querin O.M. Evolutionary topology optimization for temperature reduction of heat conducting fields. Int. J. Heat Mass Tran. 2004, 47(23):5071-5083.
290. Maute K., Frangopol D.M. Reliability-based design of MEMS mechanisms by topology optimization. Comput. Struct. 2003, 81(8-11):813-824.
291. Neves M.M., Rodrigues H., Guedes J.M. Optimal design of periodic linear elastic microstructures. Comput. Struct. 2000, 76(1-3):421-429.
292. Ohsaki M., Swan C.C. Topology and geometry optimization of trusses and frames. Recent Advances in Optimal Structural Design 2002, American Society of Civil Engineers, Reston, VA. S.A. Burns (Ed.).
293. Sandgren E., Cameron T.M Robust design optimization of structures through consideration of variation. Comput. Struct. 2002, 80(20-21):1605-1613.
294. Schneibel J.H., Kramer M.J., Unal O., Wright R.N. Processing and mechanical properties of a molybdenum silicide with the composition Mo-12Si-8.5B (at. %). Intermetallics 2001, 9(1):25-31.
295. Seepersad, C.C., 2004. A robust Topological Preliminary design Exploration Method with Materials design Applications Ph.D. dissertation. GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
296. Seepersad, C. C., Allen, J. K., McDowell, D. L., and Mistree, F. 2005. Robust design of cellular materials with topological and dimensional imperfections. Advances in Design Automation Conference. Paper No: ASME IDETC/DAC-85061.
297. Seepersad C.C., Allen J.K., McDowell D.L., Mistree F. Robust design of cellular materials with topological and dimensional imperfections. ASME J. Mech. Des. 2006, 128(6):1285-1297.
298. Seepersad C.C., Allen J.K., McDowell D.L., Mistree F. Multifunctional topology design of cellular materials. ASME J. Mech. Des. 2007, 130(3):1-13. 031404.
299. Seepersad C.C., Dempsey B.M., Allen J.K., Mistree F., McDowell D.L. Design of multifunctional honeycomb materials. AIAA J. 2004, 42(5):1025-1033.
300. Seepersad C.C., Kumar R.S., Allen J.K., Mistree F., McDowell D.L. Multifunctional design of prismatic cellular materials. J. Comput-Aided Mater. Des. 2005, 11(2-3):163-181.
301. Sigmund O. Materials with prescribed constitutive parameters: An inverse homogenization problem. Int. J. Solids Struct. 1994, 31(17):2313-2329.
302. Sigmund O. Tailoring materials with prescribed elastic properties. Mech. Mater. 1995, 20(4):351-368.
303. Sigmund O. Design of multiphysics actuators using topology optimization-Part I: One-material structures. Comput. Method. Appl. Mech. Eng. 2001, 190(49-50):6577-6604.
304. Sigmund O., Torquato S. Design of materials with extreme thermal expansion using a three-phase topology optimization method. J. Mech. Phys. Solids 1997, 45(6):1037-1067.
305. Sigmund O., Torquato S., Aksay I.A. On the design of 1-3 piezocomposites using topology optimization. J. Mater. Res. 1998, 13(4):1038-1048.
306. Silva M.J., Hayes W.C., Gibson L.J. The effects of non-periodic microstructure on the elastic properties of two-dimensional cellular solids. Int. J. Mech. Sci. 1995, 37(11):1161-1177.
307. Svanberg K. The method of moving asymptotes: A new method for structural optimization. Int. J. Numer. Meth. Eng. 1987, 24(2):359-373.
308. Thampan C.K.P.V., Krishnamoorthy C.S. System reliability-based configuration optimization of trusses. J. Struct. Eng. 2001, 127(8):947-956.
309. Topping B.H.V. Shape optimization of skeletal structures: A review. J. Struct. Eng. 1984, 109(8):1933-1951.
310. Wang A., McDowell D.L. Effects of defects on in-plane properties of periodic metal honeycombs. Int. J. Mech. Sci. 2004, 45(11):1799-1813.
311. Aitkin M. Modelling variance heterogeneity in normal regression using GLIM. Appl. Stat. 1987, 36(3):332-339.
312. Amemiya T. A note on a heteroscedastic model. J. Econometrics 1977, 6:365-370.
313. Askeland D.R. The Science and Engineering of Materials 1994, PWS Publishing Company, Boston. third ed.
314. Benson D.J. A multi-material Eulerian formulation for the efficient solution of impact and penetration problems. Comput. Mech. 1995, 15(6):558-571.
315. Box G.E.P., Meyer R.D. Dispersion effects from fractional design. Technometrics 1986, 28(1):19-27.
316. Chan L.K., Mak T.K. A regression approach for discovering small variation around a target, Applied Statistics. J. R. Stat. Soc. Ser. C, 1995, 44(3):369-377.
317. Chen W., Allen J.K., Mavris D., Mistree F. A concept exploration method for determining robust top-level specifications. Eng. Optimiz. 1996, 26(2):137-158.
318. Chen W., Lewis K. A robust design approach for achieving flexibility in multidisciplinary design. AIAA J. 1999, 37(8):982-989.
319. Chen W., Simpson T.W., Allen J.K., Mistree F. Satisfying ranged sets of design requirements using design capability indices as metrics. Eng. Optimiz. 1999, 31(5):615-639.
320. Choi, H.-J., 2001, A framework for distributed product realization, M.S., thesis. G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
321. Choi H.-J., Austin R., Allen J.K., McDowell D.L., Mistree F., Benson D.J. An approach for robust design of reactive powder metal mixtures based on non-deterministic micro-scale shock simulation. J. Comput.-Aided Mater. Des. 2005, 12(1):57-85.
322. Choi, H.-J., Panchal, J. H., Allen, K. J., Rosen, D., and Mistree, F. 2003, Towards a standardized engineering framework for distributed, collaborative product realization. ASME Computers and Information in Engineering Conference, Chicago, IL. Paper number: DETC2003/CIE-48279.
323. Davidian M., Carroll R.J. Variance function estimation. J. Am. Stat. Assoc. 1987, 82(400):1079-1091.
324. Engel J., Huele A.F. Generalized linear modeling approach to robust design. Technometrics 1996, 38(4):365-373.
325. Engineous Inc. 2001. Product Overview: iSIGHT. <>. http://www.engineous.com/overview.html.
326. Glejser H. A new test for heteroscedasticity. J. Am. Stat. Assoc. 1969, 64(325):316-323.
327. Gong G., Samaniego F.J. Pseudo-maximum likelihood estimation: Theory and application. Ann. Stat. 1981, 9(4):861-869.
328. Grego J.M. Generalized linear models and process variation. J. Qual. Technol. 1993, 25(4):288-295.
329. Harvey A.C. Estimation regression models with multiplicative heteroscedasticity. Econometrica 1976, 44(3):461-465.
330. Hoffman J.D. Numerical Methods for Engineers and Scientists 1992, McGraw-Hill, New York.
331. Jobson J.D., Fuller W.A. Least squares estimation when the convariance matrix and parameter vector are functionally related. J. Am. Stat. Assoc. 1980, 75(369):176-181.
332. McKay M.D., Conover W.J., Beckman R.J. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code. Technometrics 1979, 21(2):239-245.
333. Merzhanov A.G. On critical conditions for thermal explosion of a hot spot. Combust. Flame 1966, 10(4):341-348.
334. Mistree F., Hughes O.F., Bras B.A. The compromise decision support problem and the adaptive linear programming algorithm. Structural optimization: Status and promise 1992, 251-290. AIAA, Washington, DC. M.P. Kamat (Ed.).
335. Myers R.H., Montgomery D.C. Response surface Methodology, Wiley Series in Probability and Statistics 1995, A Wiley Interscience Publication, New York.
336. Myerson R.B. Game Theory: Analysis of Conflict 1991, Harvard University Press, Cambridge, MA.
337. Nair V.N., Pregibon D. Analyzing dispersion effects from replicated factorial experiments. Technometrics 1988, 30(3):247-256.
338. Neter J., Kutner M.H., Nachtsheim C.J., Wasserman W. Applied Linear Statistical Models 1996, IRWIN, Chicago, IL. fourth ed.
339. Olson G.B. Computational design of hierarchically structured materials. Science 1997, 277(5330):1237-1242.
340. Otto K.N., Antonsson E.K. The method of imprecision compared to utility theory for design selection problems. Design Theory and Methodology-DTM '93 1993, 167-173. ASME, New York. T.K. Hight, L.A. Stauffer (Eds.).
341. Phoenix Integration Inc. 2001. Phoenix Integration: Products. < >. http://www.phoenix-int.com/products/index.html.
342. Theil H. Principles of Econometrics 1971, John Wiley, New York.
343. Vining G.G., Myers R.H. Combining Taguchi and response surface philosophies: A dual-response approach. J. Qual. Technol. 1990, 22(1):38-45.
344. Xiao, A., Choi, H.-J., Kulkani, R., Allen, K. J., Rosen, D., and Mistree, F. 2001. A Web-based distributed product realization environment. In Computers and Information in Engineering Conference, Pittsburgh, PA, ASME, DETC01/CIE-21766.
345. Agogino A.M. Information in the design process. Frontiers of Engineering: Reports on Leading Edge Engineering from the 1996 NAE Symposium on Frontiers of Engineering 1997, 13-16. National Academy of Engineering.
346. Imprecision in Engineering Design 2001, Engineering Design Research Laboratory, Division of Engineering and Applied Science: California Institute of Technology, Pasadena, CA, (http://design.caltech.edu/Research/Imprecise/Reading_List/Imprecision_B ook.pdf). E.K. Antonsson (Ed.).
347. Antonsson, E.K., Otto, K.N., 1995. Imprecision in engineering design. J. Mech. Des.: Spec. Comb. Issue Trans. ASME Commemorat. 50th Anniv. Des. Eng. Div. ASME, 117 (B), 25-32.
348. Arrow K., Hurwicz L. An optimality criterion for decision-making under ignorance. Uncertainty and expectation in economics: Essays in honour of G. L. S. Shackle 1972, 1-11. Blackwell, Oxford, UK. C.F. Carter, J.L. Ford (Eds.).
349. Ashby M.F. Materials Selection in Mechanical Design 1999, Butterworth-Heinemann, Oxford, UK.
350. Aughenbaugh, J.M., Ling, J., Paredis, C.J.J., 2005a. Applying information economics and imprecise probabilities to data collection in design. ASME IMECE 2005, Computers in Engineering Conference, Orlando, FL. Paper number: IMECE2005-81181.
351. Aughenbaugh, J.M., Ling, J.M., Paredis, C.J.J., 2005b. The use of imprecise probabilities to estimate the value of information in design. ASME International Mechanical Engineering Congress and Exposition, Orlando, FL. Paper number: IMECE2005-81181.
352. Austin, R.A., 2005. Numerical Simulation of the Shock Compaction of Microscale Reactive Particle Systems. M.S. thesis, GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
353. Austin R.A., McDowell D.L., Benson D.J. Numerical simulation of shock wave propagation in spatially-resolved microscale particle systems. Model. Simul. Mater. Sci. Eng. 2006, 14(4):537-561.
354. Benson D.J. A multi-material Eulerian formulation for the efficient solution of impact and penetration problems. Comput. Mech. 1995, 15(6):558-571.
355. Box G.E.P. Robustness in the strategy of scientific model building. Robustness in Statistics 1979, 201-235. Academic Press, New York. R.L. Launer, G.N. Wilkinson (Eds.).
356. Bradley S.R., Agogino A.M. An intelligent real time design methodology for component selection: an approach to managing uncertainty. J. Mech. Des. 1994, 116(4):980-988.
357. Bradley S.R., Agogino A.M., Wood W.H. Intelligent engineering component catalogs. Artificial Intelligence in Design '94 1994, 641-658. Kluwer, Dordrecht, the Netherlands.
358. Chen, W., 1995. A Robust Concept Exploration Method for Configuring Complex Systems. Ph.D. dissertation, Mechanical Engineering department, GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
359. Choi, H.-J., 2005. A Robust Design Method for Model and Propagated Uncertainty. Ph.D. dissertation, Mechanical Engineering department, GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
360. Choi, H.-J., Allen, J.K., Rosen, D., McDowell, D.L., Mistree, F., 2005. An inductive design exploration method for the integrated design of multi-scale materials and products. Design Automation Conference, Long Beach, CA. Paper number: DETC2005-85335.
361. Choi, H.-J., Austin, R., Allen, J.K., McDowell, D.L., Mistree, F., 2004. An approach for robust micro-scale materials design under unparameterizable variability. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY. Paper number: AIAA-2004-4331.
362. Choi H.-J., Austin R., Allen J.K., McDowell D.L., Mistree F. An approach for robust design of reactive powder metal mixtures based on non-deterministic micro-scale shock simulation. J. Comput-Aided Mater. Des. 2005, 12(1):57-85.
363. Engineous Inc., 2004. iSIGHT, Version 8.0. http://www.engineous.com/product_iSIGHT.htm.
364. Fernández M.G., Seepersad C.C., Rosen D., Allen J.K., Mistree F. Decision support in concurrent engineering-The utility-based selection decision support problem. Concurrent Eng. Res. Appl. 2005, 13(1):13-28.
365. Ferson S., Donald S. Probability bounds analysis. Probabilistic Safety Assessment and Management 1998, 1203-1208. Springer-Verlag, New York. A. Mosleh, R.A. Bari (Eds.).
366. Howard R. Information value theory. IEEE Trans. Syst. Sci. Cybern. 1966, SSC-2(1):779-783.
367. Keeney R.L., Raiffa H. Decisions with Multiple Objectives: Preferences and Value Tradeoffs 1976, John Wiley and Sons, New York.
368. Lawrence D.B. The Economic Value of Information 1999, Springer, New York.
369. Lu, X., Narayanan, V., Hanagud, S. 2003. Shock-induced chemical reactions in energetic structural materials. 13th American Physical Society Topical Conference on Shock Compaction of Condensed Matter, Portland, OR, July 20-25, 2003.
370. Merzhanov A.G. On critical conditions for thermal explosion of a hot spot. Combust. Flame. 1966, 10(4):341-348.
371. Messer, M., 2008. Systematic Approach for Integrated Product, Materials, and Design-Process Design. Ph.D. dissertation, Mechanical Engineering department, GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
372. Mistree F., Hughes O.F., Bras B.A. The compromise decision support problem and the adaptive linear programming algorithm. Structural Optimization: Status and Promise 1993, 247-286. AIAA, Washington, DC. M.P. Kamat (Ed.).
373. Mistree, F., Seepersad, C.C., Dempsey, B.M., McDowell, D.L., 2002. Robust concept exploration methods in materials design. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Paper number: AIAA-2002-5568.
374. Moore R.E. Interval Analysis 1966, Prentice-Hall, Englewood Cliffs, NJ.
375. Pahl G., Beitz W. Engineering Design: A Systematic Approach 1996, Springer-Verlag, New York. second ed.
376. Panchal, J.H., 2005. A Framework for Simulation-Based Integrated Design of Multiscale Products and Design Processes. Ph.D. dissertation, Mechanical Engineering department, the GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
377. Panchal J.H., Choi H.-J., Allen J.K., McDowell D.L., Mistree F. A systems based approach for integrated design of materials, products, and design process chains. J. Comput-Aided Mater. Des. 2007, 14(Suppl. 1):265-293.
378. Panchal, J.H., Choi, H.-J., Shephard, J., Allen, J.K., McDowell, D.L., Mistree, F., 2005. A strategy for simulation-based multiscale, multifunctional design of products and design processes. ASME Design Automation Conference, Long Beach, CA. Paper number: DETC2005-85316.
379. Patel, N., 2004. Intermediate Strain Rate Behavior of Two Structural Energetic Materials. MS thesis, the GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
380. Phoenix Integration Inc., 2004. ModelCenter®, Version 5.0. <>. http://www.phoenix-int.com/products/ModelCenter.html.
381. Poh K.L., Horvitz E. Reasoning about the value of decision model refinement: methods and application. Proceedings of ninth conference on uncertainty in artificial intelligence 1993, Morgan Kaufmann, San Francisco, 174-182.
382. Seepersad, C.C., 2001. The Utility-Based Compromise Decision Support Problem with Applications in Product Platform Design. M.S. thesis, Mechanical Engineering department, the G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
383. Seepersad, C.C., Allen, J.K., McDowell, D.L., Mistree, F., 2008. Multifunctional topology design of cellular structures. ASME J. Mech. Des. 130 (3) 031404(1-13).
384. Seepersad C.C., Mistree F., Allen J.K. Designing evolving families of products using the utility-based compromise decision support problem. Int. J. Mass Customisat. 2005, 1(1):37-64.
385. Simon H.A. The Sciences of the Artificial 1996, The MIT Press, Cambridge, MA.
386. Simpson T.W., Rosen D., Allen J.K., Mistree F. Metrics for assessing design freedom and information certainty in the early stages of design. J. Mech. Des. 1998, 120(4):628-635.
387. Taguchi G. Introduction to Quality Engineering 1986, UNIPUB, New York.
388. Taylor G.I. The testing of materials at high rates of loading. J. Inst. Civil Engrs. 1946, 26:486-519.
389. Taylor G.I. The use of flat ended projectiles for determining yield stress, I: Theoretical consideration. Proc. R. Soc. Lond. 1948, A194:289-299.
390. Von Neumann J., Morgenstern O. The Theory of Games and Economic Behavior 1947, Princeton University Press, Princeton, NJ.
391. Ward A.C., Lozano-Perez T., Seering W.P. Extending the constraint propagation of intervals. Artif. Intell. Eng. Des. Manuf. 1990, 4(1):47-54.
392. Wood K.L., Antonsson E.K. Computations with imprecise parameters in engineering design: Background and theory. ASME J. Mech., Transm., Autom. Des. 1989, 111(4):616-625.
393. Wood, W.H. 2000. Quantifying design freedom in decision based conceptual design. ASME Design Engineering Technical Conferences, Baltimore, MD. Paper number: DETC2000/DTM-14577.
394. Wood W.H., Agogino A.M. Decision-based conceptual design: Modeling and navigating heterogeneous design spaces. J. Mech. Des. 2005, 127(1):2-11.
395. Alibre, 2006, Alibre Design 9.1. <>. http://www.alibre.com/products/.
396. ANSYS, 2006. ANSYS Workbench™. <>. http://www.ansys.com/products/workbench.asp/.
397. Ansys Inc, 2003. Ansys Products. <>. http://www.ansys.com/ansys/index.htm/.
398. Box, D., Ehnebuske, D., Kakivaya, G., Layman, A., Mendelsohn, N., Nielsen, H. F., Thatte, S., and Winer, D. 2000. Simple Object Access Protocol (SOAP) 1.1, <>. http://www.w3.org/TR/SOAP/.
399. Bras B.A., Mistree F. Designing design process in decision-based concurrent engineering. SAE Trans. J. Mater. Manuf. 1991, 100(3):451-458.
400. Brazier F.M.T., Langen P.H.G.v., Treur J. Modeling conflict management in design: an explicit approach. Artif. Intell. Eng., Anal. Manuf. 1995, 9(4):353-366.
401. Chalfan K.M. A knowledge system that integrates heterogeneous software for a design application. AI Mag. 1986, 7(2):80-84.
402. Choi, H.-J., 2001. A framework for distributed product realization, M.S. thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
403. Cramer, D., Jayaram, U., and Jayaram, S., 2002. A collaborative architecture for multiple computer aided engineering applications. ASME 2002 Design Engineering Technical Conferences. Montreal, Canada, September 30-October 4. Paper Number: DETC2002/CIE-34498.
404. Cutkosky M., Engelmore R., Fikes R., Genesereth M., Gruber T., Mark W., Tenenbaum J., Weber J. PACT: An experiment in integrating concurrent engineering systems. IEEE Comput. 1993, 26(1):28-37.
405. Dabke P., Cox A., Johnson D. NetBuilder: An environment for integrating tools and people. Comput. Aided. Des. 1998, 30(6):465-472.
406. Ebbesmeyer P., Gausemeier J., Krumm H., Molt T. Virtual Web plant: An Internet-based plant engineering information system. J. Comput. Inf. Sci. Eng. 2001, 1(2):257-260.
407. Engineous, Inc. 2001. Rapid Design Exploration and Optimization. <>. http://www.engineous.com/toc_ht.html/.
408. Engineous Inc., 2001. Product Overview: iSIGHT. <>. http://www.engineous.com/overview.html/.
409. Engineous Inc., 2004. iSIGHT, Version 8.0, <>. http://www.engineous.com/product_iSIGHT.htm/.
410. Gerhard F.J., Rosen D.W., Allen J., Mistree F. A distributed product realization environment for design and manufacturing. J. Comput. Inf. Sci. Eng. 2001, 1(3):235-244.
411. Gupta, S.K., Lin, E., Lo, A.J., and Xu, C., 2002. Web-based innovation alert services to support product design evolution, ASME 2002 Design Engineering Technical Conferences. Montreal, Canada, September 30-October 4. Paper Number: DETC2002/CIE-34462.
412. Hayes, A.M., Wang, A., Dempsey, B.M., and McDowell, D.L., 2001. Mechanics of linear cellular alloys. Proceedings of IMECE, International Mechanical Engineering Congress and Exposition. New York, November 11-16.
413. Huang G.Q., Lee S.W., Mak K.L. Web-based product and process data modeling in concurrent 'design for x'. Rob. Comput. Integr. Manuf. 1999, 15(1):53-63.
414. Jiang P., Fukuda S., Raper S.A. TeleDM: An Internet Web service testbed for fast product design supported by prototype manufacturing. J. Comput. Inf. Sci. Eng. 2002, 2(2):125-131.
415. Kao K.J., Seeley C.E., Yin S., Kolonay R.M., Rus T., Paradis M. Business-to-business virtual collaboration of aircraft engine combustor design. J. Comput. Inf. Sci. Eng. 2004, 4(4):365-371.
416. Kim, C.S., Kim, N., Kim, Y., Kang, S., and O'Grady, P., 1998. Internet-based concurrent engineering: An interactive 3D system with markup. Proceedings of the 18th ASME Computer in Engineering Conference. Atlanta, GA, September 13-16.
417. Lin R., Afjeh A.A. Development of XML databinding integration for Web-enabled aircraft engine simulation. J. Comput. Inf. Sci. Eng. 2004, 4(3):186-196.
418. LKSoft. 2006. JSDAI, <>. http://www.jsdai.net/.
419. Madhusudan T. An intelligent mediator-based framework for enterprise application integration. J. Comput. Inf. Sci. Eng. 2004, 4(4):294-304.
420. Marcato, D., 2002. Distributed Computing with SOAP. <>. http://www.devx.com/upload/free/features/vcdj/2000/04apr00/dm0400/dm0400 .asp/.
421. MatWeb, 2008. Online Materials Information Resource. <>. http://www.matweb.com/.
422. Microsoft, 1996. DCOM Technical Overview. <>. http://www.msdn.microsoft.com/library/default.asp?url=/library/en-us/dnd com/html/msdn_dcomtec.asp/.
423. Microsoft, 2003. SOAP Toolkit 3.0. <>. http://www.msdn.microsoft.com/downloads/default.asp?URL=/downloads/sampl e.asp?url=/msdn-files/027/001/948/msdncompositedoc.xml/.
424. MSC Software, 2006. MSC.Acumen. <>. http://www.mscsoftware.com.my/products/software/msc/acumen/index.htm/.
425. Muster D., Mistree F. The decision support problem technique in engineering design. Int. J. Appl. Eng. Educ. 1988, 4(1):23-33.
426. Nell, J., 2003. STEP on a Page (ISO 10303). <>. http://www.nist.gov/sc5/soap/.
427. OASIS, 2004. Introduction to UDDI: Important Features and Functional Concepts. <>. http://www.uddi.org/pubs/uddi-tech-wp.pdf/.
428. Olsen G.R., Cutkosky M., Tenenbaum J., Gruber T.R. Collaborative engineering based on knowledge sharing agreements. Concurrent Eng. Res. Appl. 1995, 3(2):145-159.
429. Pahng F., Senin N., Wallace D. Distribution modeling and evaluation of product design problems. Comput. Aided Des. 1998, 30(6):411-423.
430. Panchal, J.H., 2002. Towards a design support system for collaborative product realization. M.S. thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
431. Panchal J.H., Choi H.-J., Allen J.K., Rosen D., Mistree F. An adaptable service-based framework for distributed product realization. Collaborative Product Design and Manufacturing Methodologies and Applications 2007, 1-37. Springer-Verlag, UK. W. Li (Ed.).
432. Panchal, J.H., Fernández, M. G., Allen, J.K., Paredis, C.J.J., and Mistree, F., 2005. Facilitating meta-design via separation of problem, product, and process information. 2005 ASME International Mechanical Engineering Congress and Exposition. Orlando, FL November 5-11. Paper number: IMECE2005-80013.
433. Panchal, J.H., Fernández, M.G., Paredis, C.J.J., and Mistree, F., 2004. Reusable design processes via modular, executable, decision-centric templates. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Albany, NY, August 30-September 1. Paper number: AIAA-2004-4601.
434. Panchal, J. H., Vrinat, M., and Brown, D. H., 2004. Design and Simulation Frameworks, Collaborative Product Development Associates, LLC <>. Report Number: 050302. http://www.cpd-associates.com/.
435. Peak R., Lubell J., Srinivasan V., Waterbury S. STEP, XML, and UML: Complementary technologies. J. Comput. Inf. Sci. Eng.: Spec. Issue on Eng. Inf. Manage. Prod. Lifecycle Manag. 2004, 4(4):379-390.
436. Phoenix Integration Inc., 2004. ModelCenter®, Version 5.0. <>. http://www.phoenix-int.com/products/ModelCenter.html/.
437. PTC. 2003. PTC Windchill. http://www.ptc.com/products/windchill/.
438. Rajagopalan, S., Pinilla, J. M., Losleben, P., Tian, Q., and Gupta, S. K., 1998. Integrated design and rapid manufacturing over the Internet. ASME 1998 Design Engineering Technical Conferences. Atlanta, GA, September 13-16. Paper number: DETC98/CIE-5519.
439. Ray S.R. Interoperability standards in the semantic Web. J. Comput. Inf. Sci. Eng. 2002, 2(1):65-71.
440. Rezayat M. The enterprise-Web portal for life-cycle support. Comput. Aided Des. 2000, 32(2):85-96.
441. Rezayat M. Knowledge-based product development using XML and KCs. Comput. Aided Des. 2000, 32(5-6):299-309.
442. Rodgers P.A., Huxor A.P., Caldwell N.H.M. Design support using distributed Web-based AI tools. Res. Eng. Des. 1999, 11(1):31-44.
443. Schenck D.A., Wilson P.R. Information Modeling: The EXPRESS Way 1994, Oxford University Press, New York.
444. Schmidt, D.C., 2002. Distributed object computing with CORBA middleware. <>. http://www.cs.wustl.edu/~schmidt/corba.html/.
445. Seepersad, C.C., 2004. A robust topological preliminary design exploration method with materials design applications. Ph.D. dissertation, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
446. Seepersad, C.C., Dempsey, B.M., Allen, J.K., Mistree, F., and McDowell, D. L., 2002. Design of multifunctional honeycomb materials. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization. Atlanta, GA, September 4-6. Paper number: AIAA-2002-5626.
447. Shyamsundar, N., Dani, T., Sonthi, R., and Gadh, R., July 1998. Shape abstractions and representations to enable Internet-based collaborative CAD. Proceedings of the Japan-USA Symposium on Flexible Automation, Otsu, Japan, 229-236.
448. Simpson T.W., Umapathy K., Nanda J., Halbe S., Hodge B. Development of a framework for Web-based product platform customization. J. Comput. Inf. Sci. Eng. 2003, 3(2):119-129.
449. Simulia, 2009. FIPER Infrastructure. <>. http://www.simulia.com/products/fiper.html/.
450. Systinet Corporation. 2004. Systinet Server for Java. <>. http://www.systinet.com/products/ssj/overview/.
451. Toye G., Cutkosky M., Leifer L., Tenenbaum J., Glicksman J. SHARE: A methodology and environment for collaborative product development. Int. J. Intell. Coop. Inf. Syst. 1994, 3(2):129-153.
452. UGS, 2006. Teamcenter 2005. <>. http://www.ugs.com/products/teamcenter/.
453. Wang, F., Wright, P., July 1998. Internet-based design and manufacturing on an open architecture machine center. Proceedings of the Japan-USA Symposium on Flexible Automation. Otsu, Japan, 221-228.
454. Wang J., Ma Z.-D., Hulbert G.M. A distributed mechanical system simulation platform based on a gluing algorithm. J. Comput. Inf. Sci. Eng. 2005, 5(1):71-76.
455. Wang L., Shen W., Xie H., Neelamkavil J., Pardasani A. Collaborative conceptual design-State of the art and future trends. Comput. Aided Des. 2001, 34(13):981-996.
456. Wang P., Bjarnemo R., Motte D. A Web-based interactive virtual environment for mobile phone customization. J. Comput. Inf. Sci. Eng. 2005, 5(1):67-70.
457. Wu T., Xie N., Blackhurst J. Design and implementation of a distributed information system for collaborative product development. J. Comput. Inf. Sci. Eng. 2004, 4(4):281-293.
458. Wujek, B.A., Koch, P.N., McMillan, M., and Chiang, W.-S., 2002. A distributed component-based integration environment for multidisciplinary optimal and quality design. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization. Atlanta, GA, September 4-6. Paper number: AIAA2002-5476.
459. Xiao, A.H., Kulkarni, R., Allen, J., Rosen, D.W., Mistree, F., and Feng, S.C., 2001. A Web-based distributed product realization environment. ASME Computers in Engineering. Pittsburgh, PA, September 4-6. Paper number: DETC2001/CIE-21766.
460. Adams B.L., Lyon M., Henrie B. Microstructures by design: linear problems in elastic-plastic design. Int. J. Plast. 2004, 20(8-9):1577-1602.
461. Apelian D., Alleyne A., Handwerker C.A., Hopkins D., Isaacs J.A., Olson G.B., Vidyanathan R., Wolf S.D. Accelerating Technology Transition: Bridging the Valley of Death for Materials and Processes in Defense Systems 2004, Report Number: ISBN-10: 0-309-09317-1, National Materials Advisory Board, NAE, National Academies Press.
462. Backman, D.G., Dutton, R., 2006. Integrated materials modeling for aerospace components. In: Symp. on the Role of Computational Methods in Materials Research and Development: Applications of Materials Modeling and Simulation, MS&T '06, Cincinnati, OH, October 15-19.
463. Billinge, S.J.E., Rajan, K., Sinnot, S.B., 2006. From cyberinfrastructure to cyberdiscovery in materials science: Enhancing outcomes in materials research. Report of NSF-sponsored Cyberinfrastructure in Materials Research workshop held in Arlington, VA, August 3-5, < >. http://www.mcc.uiuc.edu/nsf/ciw_2006/.
464. Fan J., McDowell D.L., Horstemeyer M.F., Gall K. Cyclic plasticity at pores and inclusions in cast al-si alloys. Eng. Fract. Mech. 2003, 70(10):1281-1302.
465. Friedman T.L. The world is flat [updated and expanded]: a brief history of the twenty-first century 2006, Farrar, Straus, & Giroux, New York.
466. Fullwood D.T., Adams B.L., Kalidindi S.R. Generalized pareto front methods applied to second-order material property closures. Comput. Mater. Sci. 2007, 38(4):788-799.
467. Granta Design Ltd., 2007. Granta Material Intelligence Software. <>. http://www.grantadesign.com/.
468. Li, D.S., Bouhattate, J., Garmestani, H., 2005. Processing path model to describe texture evolution during mechanical processing. Materials Science Forum, v 495-497. In PART 2, Textures of Materials, ICOTOM 14-Proceedings of the 14th International Conference on Textures of Materials, 977-982.
469. McDowell D.L., Gall K., Horstemeyer M.F., Fan J. Microstructure-based fatigue modeling of cast A356-T6 alloy. Eng. Fract. Mech. 2003, 70(1):49-80.
470. McDowell, D.L., Story, T.L., 1998. New directions in materials design science and engineering (MDS&E). Report of a NSF DMR-sponsored Materials Design Science and Engineering workshop, October 19-21.
471. McDowell D.L., Olson G.B. Concurrent design of hierarchical materials and structures. Sci. Model. Simul. (CMNS) 2008, 15(1):207.
472. Pollock T.M., Allison J.E., Backman D.G., Boyce M.C., Gersh M., Holm E.A., LeSar R., Long M., Powell IV A.C., Schirra J.J., Whitis D.D., Woodward C. Integrated computational materials engineering: a transformational discipline for improved competitiveness and national security 2008, Report Number: ISBN-10: 0-309-11999-5, National Materials Advisory Board, NAE, National Academies Press.
473. Rajan K. Materials informatics, part I: a diversity of issues. JOM 2008, 60(3):50.
474. Rajan K. Informatics and integrated computational materials engineering: part II. JOM 2009, 61(1):47.
475. QuesTek Innovations LLC., 2009. <>. http://www.questek.com/.
476. Torquato S. Random Heterogeneous Materials: Microstructure and Macroscopic Properties 2002, Springer-Verlag, New York.
477. Ashby M.F. Materials Selection in Mechanical Design 1999, Butterworth-Heinemann, Oxford, UK.
478. McDowell, D.L., Story, T.L., 1998. New directions in materials design science and engineering (MDS&E). Report of a NSF DMR-sponsored workshop on materials design science and engineering, Atlanta, GA, October 19-21.
479. Oden J.T., Belytschko T., Fish J., Hughes T.J.R., Johnson C., Keyes D., Laub A., Petzold L., Srolovitz D., Yip S. Simulation-based engineering science: Revolutionizing engineering science through simulation. A Report of the National Science Foundation Blue Ribbon Panel on Simulation-Based Engineering Science 2006, National Science Foundation, Arlington, VA.
480. Olson G.B. Computational design of hierarchically structured materials. Science, 1997, 277(5330):1237-1242.