Ceramic dental biomaterials and CAD/CAM technology: State of the art

Journal of Prosthodontic Research

Volumn 58, Issue 4, 2014, Pages 208-216

  Li, Raymond Wai Kim ^a   Chow, Tak Wah ^a   Matinlinna, Jukka Pekka ^a  

^a UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

CAD CAM; Dental ceramics; Survival rate

Indexed keywords

ALUMINUM OXIDE; ALUMINUM SILICATE; BIOMATERIAL; CE-TZP-AL2O3; CERAMICS; CERIUM; DENTAL MATERIAL; DENTAL PORCELAIN; GLASS; LEUCITE; LITHIA DISILICATE; MAGNESIUM; MICA; ZIRCONIUM; ZIRCONIUM OXIDE;

CERAMICS; CHEMISTRY; COMPUTER AIDED DESIGN; CRYSTALLIZATION; DENTAL IMPRESSION; DENTAL PROCEDURE; DENTAL SURGERY; HUMAN; PROCEDURES; TOOTH PROSTHESIS;

ALUMINUM OXIDE; ALUMINUM SILICATES; BIOCOMPATIBLE MATERIALS; CERAMICS; CERIUM; COMPUTER-AIDED DESIGN; CRYSTALLIZATION; DENTAL IMPRESSION TECHNIQUE; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION, PERMANENT; ESTHETICS, DENTAL; GLASS; HUMANS; MAGNESIUM; ZIRCONIUM;

EID: 84922505345     PISSN: 18831958     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jpor.2014.07.003     Document Type: Review

References (121)

1. Christensen R.P., Galan A.D., Mosher T.A. Clinical status of eleven CAD/CAM materials after one to twelve years of service. State of the art of CAD/CAM restorations: 20 years of CEREC 2006, Quintessence Publishing, Surrey. W.H. Mormann (Ed.).
2. Liu P.R., Essig M.E. Panorama of dental CAD/CAM restorative systems. Compend Contin Educ Dent 2008, 29:482-488.
3. Miyazaki T., Nakamura T., Matsumura H., Ban S., Kobayashi T. Current status of zirconia restoration. J Prosthodont Res 2013, 57:236-261.
4. Takaba M., Tanaka S., Ishiura I., Baba K. Implant-supported fixed dental prostheses with CAD/CAM-fabricated porcelain crown and zirconia-based framework. J Prosthodont 2013, 22:402-407.
5. Hickel R., Manart J. Longevity of restorations in posterior teeth and reasons for failure. J Adhes Dent 2001, 3:45-64.
6. Manhart J., Chen H., Hamm G., Hickel R. Buonocore Memorial Lecture. Review of the clinical survival of direct and indirect restorations in posterior teeth of the permanent dentition. Oper Dent 2004, 29:481-508.
7. Holand W., Schweiger M., Rheinberger V.M., Kappert H. Bioceramics and their applications for dental restoration. Adv Appl Ceram 2009, 108:373-380.
8. Liu D., Matinlinna J.P., Pow E.H.N. Insights into porcelain zirconia bonding. J Adhes Sci Technol 2012, 26:1249-1265.
9. Abduo J., Lyons K., Swain M. Fit of zirconia fixed partial denture: a systematic review. J Oral Rehabil 2010, 37:866-876.
10. Kelly J.R., Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J 2011, 56(Suppl. 1):84-96.
11. Wittneben J.G., Wright R.F., Weber H.P., Gallucci G.O. A systematic review of the clinical performance of CAD/CAM single-tooth restorations. Int J Prosthodont 2009, 22:466-471.
12. Beuer F., Stimmelmayr M., Gernet W., Edelhoff D., Guh J.F., Naumann M. Prospective study of zirconia-based restorations: 3-year clinical results. Quintessence Int 2010, 41:631-637.
13. Mormann W.H., Bindl A. All-ceramic, chair-side computer aided design/computer aided machining restorations. Dent Clin North Am 2002, 46:405-426.
14. Otto T., de Nisco S. Computer-aided direct ceramic restorations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays. Int J Prosthodont 2002, 15:122-128.
15. Bindl A., Lüthy H., Mörmann W.H. Fracture load of CAD/CAM-generated slot-inlay FPDs. Int J Prosthodont 2003, 16:653-660.
16. Giordano R. Materials for chairside CAD/CAM-produced restorations. J Am Dent Assoc 2006, 137(Suppl.):14S-21S.
17. Della Bona A. Bonding to ceramics: scientific evidence for clinical dentistry 2009, Editoria Artes Medica, São Paolo.
18. Pallesen U., van Dijken J.W. An 8-year evaluation of sintered ceramic and glass ceramic inlays processed by the Cerec CAD/CAM system. Eur J Oral Sci 2000, 108:239-246.
19. Sjögren G., Molin M., van Dijken J.W. A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite. Int J Prosthodont 2004, 17:241-246.
20. Zimmer S., Göhlich O., Rüttermann S., Lang H., Raab W.H., Barthel C.R. Long-term survival of Cerec restorations: a 10-year study. Oper Dent 2008, 33:484-487.
21. Nakamura T., Dei N., Kojima T., Wakabayashi K. Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int J Prosthodont 2003, 16:244-248.
22. Wiedhahn K. CEREC veneers: esthetics and longevity. State of the art of CAD/CAM restorations: 20 years of CEREC 2006, Quintessence Publishing, Surrey. W.H. Mormann (Ed.).
23. Bindl A., Mörmann W.H. Survival rate of mono-ceramic and ceramic-core CAD/CAM-generated anterior crowns over 2-5 years. Eur J Oral Sci 2004, 112:197-204.
24. Lampe K., Luthy H., Mormann W.H. Fracture load of all ceramic computer crowns. CAD/CAM in aesthetic dentistry: CEREC 10 year anniversary symposium 1996, Quintessence, Chicago, IL. W.H. Mormann (Ed.).
25. Attia A., Kern M. Fracture strength of all-ceramic crowns luted using two bonding methods. J Prosthet Dent 2004, 91:247-252.
26. Bindl A., Richter B., Mörmann W.H. Survival of ceramic computer-aided design/manufacturing crowns bonded to preparations with reduced macroretention geometry. Int J Prosthodont 2005, 18:219-224.
27. Thurmond J.W., Barkmeier W.W., Wilwerding T.M. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 1994, 72:355-359.
28. Ho G.W., Matinlinna J.P. Insights on porcelain as a dental material. Part II: chemical surface treatments. Silicon 2011, 3:117-123.
29. Matinlinna J.P. Processing and bonding of dental ceramics. Non-metallic biomaterials for tooth repair and replacement 2013, Woodhead Publishers, Cambridge, [chapter 5]. P.K. Vallittu (Ed.).
30. Matinlinna J.P., Vallittu P.K. Bonding of resin composites to etchable ceramic surfaces - an insight review of the chemical aspects on surface conditioning. J Oral Rehabil 2007, 34:622-630.
31. Lung C.Y.K., Matinlinna J.P. Aspects of silane coupling agents and surface conditioning in dentistry: an overview. Dent Mater 2012, 28:467-477.
32. Seghi R.R., Sorensen J.A. Relative flexural strength of six new ceramic materials. Int J Prosthodont 1995, 8:239-246.
33. Denry I.L. Recent advances in ceramics for dentistry. Crit Rev Oral Biol Med 1996, 7:134-141.
34. Gladys S., Van Meerbeek B., Inokoshi S., Willems G., Braem M., Lambrechts P., et al. Clinical and semiquantitative marginal analysis of four tooth-coloured inlay systems at 3 years. J Dent 1995, 23:329-338.
35. Keshvad A., Hooshmand T., Asefzadeh F., Khalilinejad F., Alihemmati M., Van Noort R. Marginal gap, internal fit, and fracture load of leucite-reinforced ceramic inlays fabricated by CEREC inLab and hot-pressed techniques. J Prosthodont 2011, 20:535-540.
36. Denissen H.W., El-Zohairy A.A., van Waas M.A., Feilzer A.J. Porcelain-veneered computer-generated partial crowns. Quintessence Int 2002, 33:723-730.
37. Guess P.C., Strub J.R., Steinhart N., Wolkewitz M., Stappert C.F. All-ceramic partial coverage restorations - midterm results of a 5-year prospective clinical splitmouth study. J Dent 2009, 37:627-637.
38. Giordano R., McLaren E.A. Ceramics overview: classification by microstructure and processing methods. Compend Contin Educ Dent 2010, 31:682-688.
39. Culp L., McLaren E.A. Lithium disilicate: the restorative material of multiple options. Compend Contin Educ Dent 2010, 31:716-725.
40. Guess P.C., Zavanelli R.A., Silva N.R., Bonfante E.A., Coelho P.G., Thompson V.P. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont 2010, 23:434-442.
41. Asai T., Kazama R., Fukushima M., Okiji T. Effect of overglazed and polished surface finishes on the compressive fracture strength of machinable ceramic materials. Dent Mater J 2010, 29:661-667.
42. Tysowsky G.W. The science behind lithium disilicate: a metal-free alternative. Dent Today 2009, 28:112-113.
43. Reich S., Fischer S., Sobotta B., Klapper H.U., Gozdowski S. A preliminary study on the short-term efficacy of chairside computer-aided design/computer-assisted manufacturing-generated posterior lithium disilicate crowns. Int J Prosthodont 2010, 23:214-216.
44. Fasbinder D.J., Dennison J.B., Heys D., Neiva G. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. J Am Dent Assoc 2010, 141(Suppl. 2):10S-14S.
45. Filho A.M., Vieira L.C., Araújo E., Monteiro Júnior S. Effect of different ceramic surface treatments on resin microtensile bond strength. J Prosthodont 2004, 13:28-35.
46. Apholt W., Bindl A., Lüthy H., Mörmann W.H. Flexural strength of Cerec 2 machined and jointed InCeram-alumina and InCeram-zirconia bars. Dent Mater 2001, 17:260-267.
47. Bindl A., Mörmann W.H. An up to 5-year clinical evaluation of posterior In-Ceram CAD/CAM core crowns. Int J Prosthodont 2002, 15:451-456.
48. Kokubo Y., Tsumita M., Sakurai S., Suzuki Y., Tokiniwa Y., Fukushima S. Five-year clinical evaluation of In-Ceram crowns fabricated using GN-I (CAD/CAM) system. J Oral Rehabil 2011, 38:601-607.
49. Kokubo Y., Nagayama Y., Tsumita M., Ohkubo C., Fukushima S., Vult von Steyern P. Clinical marginal and internal gaps of In-Ceram crowns fabricated using the GN-I system. J Oral Rehabil 2005, 32:753-758.
50. Awliya W., Odén A., Yaman P., Dennison J.B., Razzoog M.E. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol Scand 1998, 56:9-13.
51. Segal B.S. Retrospective assessment of 546 all-ceramic anterior and posterior crowns in a general practice. J Prosthet Dent 2001, 85:544-550.
52. Kern M., Thompson V.P. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent 1994, 71:453-461.
53. Kern M., Thompson V.P. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent 1995, 73:240-249.
54. Chong K.H., Chai J., Takahashi Y., Wozniak W. Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials. Int J Prosthodont 2002, 15:183-188.
55. Heffernan M.J., Aquilino S.A., Diaz-Arnold A.M., Haselton D.R., Stanford C.M., Vargas M.A. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002, 88:10-15.
56. Bindl A., Mörmann W.H. Fit of all-ceramic posterior fixed partial denture frameworks in vitro. Int J Periodontics Restorative Dent 2007, 27:567-575.
57. Reich S., Wichmann M., Nkenke E., Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 2005, 113:174-179.
58. Chai J., Chu F.C., Chow T.W. Effect of surface treatment on shear bond strength of zirconia to human dentin. J Prosthodont 2011, 20:173-179.
59. Li J., Liao H., Hermansson L. Sintering of partially-stabilized zirconia and partially-stabilized zirconia-hydroxyapatite composites by hot isostatic pressing and pressureless sintering. Biomaterials 1996, 17:1787-1790.
60. Andersson M., Oden A. A new all-ceramic crown. A dense-sintered, high-purity alumina coping with porcelain. Acta Odontol Scand 1993, 51:59-64.
61. Zeng K., Odén A., Rowcliffe D. Flexure tests on dental ceramics. Int J Prosthodont 1996, 9:434-439.
62. Brunton P.A., Smith P., McCord J.F., Wilson N.H. Procera all-ceramic crowns: a new approach to an old problem?. Br Dent J 1999, 186:430-434.
63. Heffernan M.J., Aquilino S.A., Diaz-Arnold A.M., Haselton D.R., Stanford C.M., Vargas M.A. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002, 88:4-9.
64. Hager B., Odén A., Andersson B., Andersson L. Procera AllCeram laminates: a clinical report. J Prosthet Dent 2001, 85:231-232.
65. Odman P., Andersson B. Procera AllCeram crowns followed for 5 to 10.5 years: a prospective clinical study. Int J Prosthodont 2001, 14:504-509.
66. Fradeani M., D'Amelio M., Redemagni M., Corrado M. Five-year follow-up with Procera all-ceramic crowns. Quintessence Int 2005, 36:105-113.
67. Walter M.H., Wolf B.H., Wolf A.E., Boening K.W. Six-year clinical performance of all-ceramic crowns with alumina cores. Int J Prosthodont 2006, 19:162-163.
68. Kassem A.S., Atta O., El-Mowafy O. Survival rates of porcelain molar crowns - an update. Int J Prosthodont 2010, 23:60-62.
69. Zitzmann N.U., Galindo M.L., Hagmann E., Marinello C.P. Clinical evaluation of Procera AllCeram crowns in the anterior and posterior regions. Int J Prosthodont 2007, 20:239-241.
70. May K.B., Russell M.M., Razzoog M.E., Lang B.R. Precision of fit: the Procera AllCeram crown. J Prosthet Dent 1998, 80:394-404.
71. Limkangwalmongkol P., Kee E., Chiche G.J., Blatz M.B. Comparison of marginal fit between all-porcelain margin versus alumina-supported margin on Procera Alumina crowns. J Prosthodont 2009, 18:162-166.
72. Kokubo Y., Ohkubo C., Tsumita M., Miyashita A., Vult von Steyern P., Fukushima S. Clinical marginal and internal gaps of Procera AllCeram crowns. J Oral Rehabil 2005, 32:526-530.
73. Raigrodski A.J. Contemporary all-ceramic fixed partial dentures: a review. Dent Clin North Am 2004, 48:531-544.
74. Andersson B., Odman P., Carlsson L., Brånemark P.I. A new Brånemark single tooth abutment: handling and early clinical experiences. Int J Oral Maxillofac Implants 1992, 7:105-111.
75. Andersson B., Odman P., Lindvall A.M., Brånemark P.I. Cemented single crowns on osseointegrated implants after 5 years: results from a prospective study on CeraOne. Int J Prosthodont 1998, 11:212-218.
76. Razzoog M.E., Lang L.A., McAndrew K.S. AllCeram crowns for single replacement implant abutments. J Prosthet Dent 1997, 78:486-489.
77. Zarone F., Sorrentino R., Vaccaro F., Russo S., De Simone G. Retrospective clinical evaluation of 86 Procera AllCeram anterior single crowns on natural and implant-supported abutments. Clin Implant Dent Relat Res 2005, 7(Suppl. 1):S95-S103.
78. Sorrentino R., Galasso L., Tete S., De Simone G., Zarone F. Clinical evaluation of 209 all-ceramic single crowns cemented on natural and implant-supported abutments with different luting agents: a 6-year retrospective study. Clin Implant Dent Relat Res 2012, 14:184-197.
79. Ozcan M., Vallittu P.K. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 2003, 19:725-731.
80. Borba M., de Araújo M.D., Fukushima K.A., Yoshimura H.N., Cesar P.F., Griggs J.A., et al. Effect of the microstructure on the lifetime of dental ceramics. Dent Mater 2011, 27:710-721.
81. Piconi C., Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999, 20:1-25.
82. Garvie R.C., Hannink R.H., Pascoe R.T. Ceramic steel?. Nature 1975, 258:703-704.
83. Christel P., Meunier A., Heller M., Torre J.P., Peille C.N. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989, 23:45-61.
84. Chai J., Chu F.C., Chow T.W., Liang B.M. Chemical solubility and flexural strength of zirconia-based ceramics. Int J Prosthodont 2007, 20:587-595.
85. Christel P., Meunier A., Dorlot J.M., Crolet J.M., Witvoet J., Sedel L., et al. Biomechanical compatibility and design of ceramic implants for orthopedic surgery. Ann N Y Acad Sci 1988, 523:234-256.
86. Chevalier J. What future for zirconia as a biomaterial?. Biomaterials 2006, 27:535-543.
87. Kim J.W., Covel N.S., Guess P.C., Rekow E.D., Zhang Y. Concerns of hydrothermal degradation in CAD/CAM zirconia. J Dent Res 2010, 89:91-95.
88. Kohorst P., Borchers L., Strempel J., Stiesch M., Hasel T., Bach F.W., et al. Low-temperature degradation of different zirconia ceramics for dental applications. Acta Biomater 2012, 8:1213-1220.
89. Guess P.C., Schultheis S., Bonfante E.A., Coelho P.G., Ferencz J.L., Silva N.R. All-ceramic systems: laboratory and clinical performance. Dent Clin North Am 2011, 55:333-352.
90. Springate S.D., Winchester L.J. An evaluation of zirconium oxide brackets: a preliminary laboratory and clinical report. Br J Orthod 1991, 18:203-209.
91. Meyenberg K.H., Lüthy H., Schärer P. Zirconia posts: a new all-ceramic concept for nonvital abutment teeth. J Esthet Dent 1995, 7:73-80.
92. Luthardt R.G., Sandkuhl O., Reitz B. Zirconia-TZP and alumina - advanced technologies for the manufacturing of single crowns. Eur J Prosthodont Restor Dent 1999, 7:113-119.
93. Kohal R.J., Klaus G., Strub J.R. Zirconia-implant-supported all-ceramic crowns withstand long-term load: a pilot investigation. Clin Oral Implants Res 2006, 17:565-571.
94. Glauser R., Sailer I., Wohlwend A., Studer S., Schibli M., Schärer P. Experimental zirconia abutments for implant-supported single-tooth restorations in esthetically demanding regions: 4-year results of a prospective clinical study. Int J Prosthodont 2004, 17:285-290.
95. Christensen G.J. Choosing an all-ceramic restorative material: porcelain-fused-to-metal or zirconia-based?. J Am Dent Assoc 2007, 138:662-665.
96. Aboushelib M.N., Dozic A., Liem J.K. Influence of framework color and layering technique on the final color of zirconia veneered restorations. Quintessence Int 2010, 41:e84-e89.
97. Tinschert J., Natt G., Mautsch W., Augthun M., Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 2001, 14:231-238.
98. 2 three-unit fixed partial dentures: comparison of failure load before and after exposure to a mastication simulator. J Oral Rehabil 2007, 34:282-290.
99. Zahran M., El-Mowafy O., Tam L., Watson P.A., Finer Y. Fracture strength and fatigue resistance of all-ceramic molar crowns manufactured with CAD/CAM technology. J Prosthodont 2008, 17:370-377.
100. Dittmer M.P., Borchers L., Stiesch M., Kohorst P. Stresses and distortions within zirconia-fixed dental prostheses due to the veneering process. Acta Biomater 2009, 5:3231-3239.
101. Beuer F., Schweiger J., Eichberger M., Kappert H.F., Gernet W., Edelhoff D. High strength CAD/CAM-fabricated veneering material sintered to zirconia copings - a new fabrication mode for all-ceramic restorations. Dent Mater 2009, 25:121-128.
102. Swain M.V. Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures. Acta Biomater 2009, 5:1668-1677.
103. Sundh A., Sjögren G. Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering. Dent Mater 2006, 22:778-784.
104. Fischer J., Starwarczyk B., Trottmann A., Hammerle C.H.F. Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks. Dent Mater 2009, 25:326-330.
105. Philipp A., Fischer J., Hammerle C.H.F., Sailer I. Novel ceria-stabilized tetragonal zirconia/alumina nanocomposite as framework material for posterior fixed dental prostheses: preliminary results of a prospective case series at 1 year of function. Quintessence Int 2010, 41:313-319.
106. Mallineni S.K., Nuvvula S., Matinlinna J.P., Yiu C.K.Y., King N.M. Biocompatibility of various dental materials of contemporary dentistry: a narrative insight. J Invest Clin Dent 2013, 4:9-19.
107. Blatz M.B., Sadan A., Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003, 89:268-274.
108. Della Bona A. Important aspects of bonding resin to dental ceramics. J Adhes Sci Technol 2009, 23:1163-1179.
109. Luthardt R.G., Holzhüter M., Sandkuhl O., Herold V., Schnapp J.D., Kuhlisch E., et al. Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 2002, 81:487-491.
110. Zhang Y., Lawn B.R., Malament K.A., Van Thompson P., Rekow E.D. Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont 2006, 19:442-448.
111. Liu D., Pow E.H.N., Tsoi J.K.H., Matinlinna J.P. Evaluation of four surface coating treatments for resin to zirconia bonding. J Mech Behav Biomed Mater 2014, 32:300-309.
112. Aboushelib M.N., Matinlinna J.P., Salameh Z., Ounsi H. Innovations in bonding to zirconia-based materials: part I. Dent Mater 2008, 24:1268-1272.
113. Thompson J.Y., Stoner B.R., Piascik J.R., Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now?. Dent Mater 2011, 27:71-82.
114. Liu D., Matinlinna J.P., Tsoi J.K.H., Pow E.N.H., Miyazaki T., Shibata Y., et al. A new modified laser pretreatment for porcelain zirconia bonding. Dent Mater 2013, 29:559-565.
115. Matinlinna J.P., Lassila L.V., Vallittu P.K. Pilot evaluation of resin composite cement adhesion to zirconia using a novel silane system. Acta Odontol Scand 2007, 65:44-51.
116. Matinlinna J.P., Choi A.H., Tsoi J.K.H. Bonding promotion of resin-composite to silica-coated zirconia implant surface using a novel silane system. Clin Oral Implants Res 2013, 24:290-296.
117. Aboushelib M.N., Mirmohamadi H., Matinlinna J.P., Kukk E., Ounsi H.F., Salameh Z. Innovations in bonding to zirconia-based materials. Part II: focusing on chemical interactions. Dent Mater 2009, 25:989-993.
118. Kern M., Barloi A., Yang B. Surface conditioning influences zirconia ceramic bonding. J Dent Res 2009, 88:817-822.
119. Mirmohammadi H., Aboushelib M.N., Salameh Z., Feilzer A.J., Kleverlaan C.J. Innovations in bonding to zirconia based ceramics. Part III: phosphate monomer resin cements. Dent Mater 2010, 26:786-792.
120. Cheng H.C.K., Tsoi J.K.H., Zwahlen R.A., Matinlinna J.P. Effects of silica-coating and a zirconate coupling agent on shear bond strength of flowable resin-zirconia bonding. Int J Adhes Adhes 2014, 50:11-16.
121. Inokoshi M., De Munck J., Minakuchi S., Van Meerbeek B. Meta-analysis of bonding effectiveness to zirconia ceramics. J Dent Res 2014, 93:329-334.