Resin-ceramic bonding: A review of the literature

Journal of Prosthetic Dentistry

Volumn 89, Issue 3, 2003, Pages 268-274

  Blatz, Markus B ^a,c   Sadan, Avishani ^a   Kern, Matthias ^b  

^a LOUISIANA STATE UNIVERSITY SCHOOL OF DENTISTRY   (United States)

^b UNIVERSITY OF KIEL   (Germany)

^c LOUISIANA STATE UNIVERSITY HEALTH SCIENCES CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

RESIN; SILICON DIOXIDE; ALUMINUM OXIDE; BIOMEDICAL AND DENTAL MATERIALS; RESIN CEMENT; ZIRCONIUM; ZIRCONIUM OXIDE;

CERAMIC PROSTHESIS; DATA BASE; MEDICAL DOCUMENTATION; MEDICAL LITERATURE; MEDICAL RESEARCH; MEDLINE; PEER REVIEW; REVIEW; TENSILE STRENGTH; TOOTH PROSTHESIS; CERAMICS; CHEMISTRY; CONTROLLED CLINICAL TRIAL; DENTAL BONDING; DENTAL CARE; HUMAN; MATERIALS TESTING; SURFACE PROPERTY;

ALUMINUM OXIDE; CERAMICS; COMPOSITE RESINS; CONTROLLED CLINICAL TRIALS; DENTAL BONDING; DENTAL MATERIALS; ESTHETICS, DENTAL; HUMANS; MATERIALS TESTING; RESIN CEMENTS; SILICON DIOXIDE; SURFACE PROPERTIES; ZIRCONIUM;

EID: 0038644503     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1067/mpr.2003.50     Document Type: Article

References (133)

1. Cho GC, Donovan TE, Chee WW. Clinical experiences with bonded porcelain laminate veneers. J Calif Dent Assoc 1998;26:121-7.
2. Dumfahrt H, Schaffer H. Porcelain laminate veneers. A retrospective evaluation after 1 to 10 years of service: Part II - clinical results. Int J Prosthodont 2000;13:9-18.
3. Friedman MJ. Ask the experts: porcelain veneers. J Esthet Restor Dent 2001;13:86-7.
4. Fradeani M. Six-year follow-up with Empress veneers. Int J Periodontics Restorative Dent 1998;18:216-25.
5. Peumans M, Van Meerbeek B, Lambrechts P, Vanherle G. Porcelain veneers: a review of the literature. J Dent 2000;28:163-77.
6. Blatz MB. Long-term clinical success of all-ceramic posterior restorations. Quintessence Int 2002;33:415-26.
7. Felden A, Schmalz G, Federlin M, Hiller KA. Retrospective clinical investigation and survival analysis on ceramic inlays and partial ceramic crowns: results up to 7 years. Clin Oral Investig 1998;2:161-7.
8. van Dijken JW, Hoglund-Aberg C, Olofsson AL. Fired ceramic inlays: a 6-year follow up. J Dent 1998;26:219-25.
9. Hayashi M, Tsuchitani Y, Miura M, Takeshige F, Ebisu S. 6-year clinical evaluation of fired ceramic inlays. Oper Dent 1998;23:318-26.
10. Fuzzi M, Rappelli G. Ceramic inlays: clinical assessment and survival rate. J Adhesive Dent 1999;1:71-9.
11. Roulet JF. Longevity of glass ceramic inlays and amalgam - results up to 6 years. Clin Oral Invest 1997;1:40-6.
12. Mormann W, Krejci I. Computer-designed inlays after 5 years in situ: clinical performance and scanning electron microscopic evaluation. Quintessence Int 1992;23:109-15.
13. Pallesen U. Clinical evaluation of CAD/CAM ceramic restorations: 6-year report. In: Mormann WH, editor. CAD/CIM in aesthetic dentistry: CEREC 10 year anniversary symposium. Berlin: Quintessence; 1996. p. 241-53.
14. Berg NG, Derand T. A 5-year evaluation of ceramic inlays (CEREC). Swed Dent J 1997;21:121-7.
15. Sjogren G, Molin M, van Dijken JW. A 5-year clinical evaluation of ceramic inlays (Cerec) cemented with a dual-cured or chemically cured resin composite luting agent. Acta Odontol Scand 1998;56:263-7.
16. el-Mowafy O, Rubo MH. Resin-bonded fixed partial dentures - a literature review with presentation of a novel approach. Int J Prosthodont 2000;13:460-7.
17. Corrente G, Vergnano L, Re S, Cardaropoli D, Abundo R. Resin-bonded fixed partial dentures and splints in periodontally compromised patients: a 10-year follow-up. Int J Periodontics Restorative Dent 2000;20:628-36.
18. Behr M, Leibrock A, Stich W, Rammelsberg P, Rosentritt M, Handel G. Adhesive-fixed partial dentures in anterior and posterior areas: results of an on-going prospective study begun in 1985. Clin Oral Investig 1998;2:31-5.
19. Kern M, Strub JR. Bonding to alumina ceramic in restorative dentistry: clinical results over up to 5 years. J Dent 1998;26:245-9.
20. Malament KA, Socransky SS. Survival of Dicor glass-ceramic dental restorations over 14 years: Part I. Survival of Dicor complete coverage restorations and effect of internal surface acid etching, tooth position, gender, and age. J Prosthet Dent 1999;81:23-32.
21. Malament KA, Socransky SS. Survival of Dicor glass-ceramic dental restorations over 14 years. Part II: effect of thickness of Dicor material and design of tooth preparation. J Prosthet Dent 1999;81:662-7.
22. Malament KA, Socransky SS. Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: effect of luting agent and tooth or tooth-substitute core structure. J Prosthet Dent 2001;86:511-9.
23. el-Mowafy O. The use of resin cements in restorative dentistry to overcome retention problems. J Can Dent Assoc 2001;67:97-102.
24. Sorensen JA, Kang SK, Avera SP. Porcelain-composite interface mic-roleakage with various porcelain surface treatments. Dent Mat 1991;7:118-23.
25. Reference deleted.
26. Jensen ME, Sheth JJ, Tolliver D. Etched-porcelain resin-bonded full-veneer crowns: in vitro fracture resistance. Compendium 1989;10:336-8, 340-1, 344-7.
27. Fradeani M. Anterior maxillary aesthetics utilizing all-ceramic restorations. Pract Periodontics Aesthet Dent 1995;7:53-66.
28. Touati B, Quintas AF. Aesthetic and adhesive cementation for contemporary porcelain crowns. Pract Proced Aesthet Dent 2001;13:611-20.
29. Latta MA, Barkmeier WW. Approaches for intraoral repair of ceramic restorations. Compend Contin Educ Dent 2000;21:635-9, 642-4.
30. Semmelmann JO, Kulp PR. Silane bonding porcelain teeth to acrylic. J Am Dent Assoc 1968;76:69-73.
31. Jochen DG, Caputo AA. Composite resin repair of porcelain denture teeth. J Prosthet Dent 1977;38:673-9.
32. Ferrando JM, Graser GN, Tallents RH, Jarvis RH. Tensile strength and microleakage of porcelain repair materials. J Prosthet Dent 1983;50:44-50.
33. Bailey LF, Bennet RJ. DICOR surface treatments for enhanced bonding. J Dent Res 1988;67:925-31.
34. Wolf DM, Powers JM, O'Keefe KL. Bond strength of composite to porcelain treated with new porcelain repair agents. Dent Mater 1992;8:158-61.
35. Sorensen JA, Engelman MJ, Torres TJ, Avera SP. Shear bond strength of composite resin to porcelain. Int J Prosthodont 1991;4:17-23.
36. Chen JH, Matsumura H, Atsuta M. Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. J Dent 1998;26:53-8.
37. Chen JH, Matsumura H, Atsuta M. Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin. Oper Dent 1998;23:250-7.
38. Barghi N. To silanate or not to silanate: making a clinical decision. Compend Contin Educ Dent 2000;21:659-62, 664.
39. Kamada K, Yoshida K, Atsuta M. Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent 1998;79:508-13.
40. Estafan D, Dussetschleger F, Estafan A, Jia W. Effect of prebonding procedures on shear bond strength of resin composite to pressable ceramic. Gen Dent 2000;48:412-6.
41. Della Bona A, Anusavice KJ, Shen C. Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2000;2:305-13.
42. Rosentritt M, Behr M, Kolbeck C, Lang R, Handel G. In vitro repair of all-ceramic and fibre-reinforced composite crowns. Eur J Prosthodont Restor Dent 2000;8:107-12.
43. Kupiec KA, Wuertz KM, Barkmeier WW, Wilwerding TM. Evaluation of porcelain surface treatments and agents for composite-to-porcelain repair. J Prosthet Dent 1996;76:119-24.
44. Thurmond JW, Barkmeier WW, Wilwerding TM. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 1994;72:355-9.
45. Shahverdi S, Canay S, Sahin E, Bilge A. Effects of different surface treatment methods on the bond strength of composite resin to porcelain. J Oral Rehabil 1998;25:699-705.
46. Pameijer CH, Louw NP, Fischer D. Repairing fractured porcelain: how surface preparation affects shear force resistance. J Am Dent Assoc 1996;127:203-9.
47. Szep S, Gerhardt T, Gockel HW, Ruppel M, Metzeltin D, Heidemann D. In vitro dentinal surface reaction of 9.5% buffered hydrofluoric acid in repair of ceramic restorations: a scanning electron microscopic investigation. J Prosthet Dent 2000;83:668-74.
48. Lacy AM, LaLuz J, Watanabe LG, Dellinges M. Effect of porcelain surface treatment on the bond to composite. J Prosthet Dent 1988;60:288-91.
49. Calamia JR. Etched porcelain veneers: the current state of the art. Quintessence Int 1985;16:5-12.
50. Kern M, Thompson VP. Sandblasting and silica coating of a glassinfiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent 1994;71:453-61.
51. Kato H, Matsumura H, Atsuta M. Effect of etching and sandblasting on bond strength to sintered porcelain of unfilled resin. J Oral Rehabil 2000;27:103-10.
52. Frankenberger R, Kramer N, Sindel J. Repair strength of etched vs silica-coated metal-ceramic and all-ceramic restorations. Oper Dent 2000;25:209-15.
53. Kiatsirirote K, Northeast SE, van Noort R. Bonding procedures for intraoral repair of exposed metal with resin composite. J Adhes Dent 1999;1:315-21.
54. Sun R, Suansuwan N, Kilpatrick N, Swain M. Characterization of tribo-chemically assisted bonding of composite resin to porcelain and metal. J Dent 2000;28:441-5.
55. Horn HR. Porcelain laminate veneers bonded to etched enamel. Dent Clin North Am 1983;27:671-84.
56. Bailey JH. Porcelain-to-composite bond strengths using four organosilane materials. J Prosthet Dent 1989;61:174-7.
57. Bertolotti RL, Lacy AM, Watanabe LG. Adhesive monomers for porcelain repair. Int J Prosthodont 1989;2:483-9.
58. Paffenbarger GC, Sweeney WT, Bowen RL. Bonding porcelain teeth to acrylic resin denture bases. J Am Dent Assoc 1967;74:1018-23.
59. Cooley RL, Tseng EY, Evans JG. Evaluation of 4-META porcelain repair system. J Esthet Dent 1991;3:11-13.
60. Diaz-Arnold AM, Aquilino SA. An evaluation of the bond strengths of four organosilane materials in response to thermal stress. J Prosthet Dent 1989;62:257-60.
61. Diaz-Arnold AM, Schneider RL, Aquilino SA. Bond strengths of intraoral porcelain repair materials. J Prosthet Dent 1989;61:305-9.
62. Diaz-Arnold AM, Wistrom DW, Aquilino SA, Swift EJ Jr. Bond strengths of porcelain repair adhesive systems. Am J Dent 1993;6:291-4.
63. Llobell A, Nicholls JI, Kois JC, Daly CH. Fatigue life of porcelain repair systems. Int J Prosthodont 1992;5:205-13.
64. Matsumura H, Kawahara M, Tanaka T, Atsuta M. A new porcelain repair system with a silane coupler, ferric chloride, and adhesive opaque system. J Dent Res 1989;68:813-8.
65. Pratt RC, Burgess JO, Schwartz RS, Smith JH. Evaluation of bond strength of six porcelain repair systems. Dent Mat 1992;8:158-61.
66. Stokes AN, Hod JA, Tidmarsh BG. Effect of 6-month water storage on silane-treated resin/porcelain bonds. J Dent 1988;16:294-6.
67. Suliman AH, Swift EJ Jr, Perdigao J. Effects of surface treatment and bonding agents on bond strength of composite resin to porcelain. J Prosthet Dent 1993;70:118-20.
68. Aida M, Hayakawa T, Mizukawa K. Adhesion of composite to porcelain with various surface conditions. J Prosthet Dent 1995;73:464-70.
69. Tjan AH, Nemetz H. A comparison of the shear bond strength between two composite resins and two etched ceramic materials. Int J Prosthodont 1988;1:73-9.
70. Braga RR, Ballester RY, Carrilho MR. Pilot study on the early shear strength of porcelain-dentin bonding using dual-cure cements. J Prosthet Dent 1999;81:285-9.
71. Soderholm KJ, Shang SW. Molecular orientation of silane at the surface of colloidal silica. J Dent Res 1993;72:1050-4.
72. Russell DA, Meiers JC. Shear bond strength of resin composite to Dicor treated with 4-META. Int J Prosthodont 1994;7:7-12.
73. Chen TM, Brauer GM. Solvent effects on bonding organo-silane to silica surfaces. J Dent Res 1982;61:1439-43.
74. Barghi N, Chung K, Farshchian F, Berry T. Effects of the solvents on bond strength of resin bonded porcelain. J Oral Rehab 1999;26:853-7.
75. Kramer N, Lohbauer U, Frankenberger R. Adhesive luting of indirect restorations. Am J Dent 2000;13:60D-76D.
76. Blackman R, Barghi N, Duke E. Influence of ceramic thickness on the polymerization of light-cured resin cement. J Prosthet Dent 1990;63:295-300.
77. Hasegawa EA, Boyer DB, Chan DC. Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent 1991;66:187-92.
78. el-Badrawy WA, el-Mowafy OM. Chemical versus dual curing of resin inlay cements. J Prosthet Dent 1995;73:515-24.
79. Chang JC, Nguyen T, Duong JH, Ladd GD. Tensile bond strengths of dual-cured cements between a glass-ceramic and enamel. J Prosthet Dent 1998;79:503-7.
80. Gregory WA, Moss SM. Effects of heterogeneous layers of composite and time on composite repair of porcelain. Oper Dent 1990;15:18-22.
81. Hahn P, Attin T, Grofke M, Hellwig E. Influence of resin cement viscosity on microleakage of ceramic inlays. Dent Mater 2001;17:191-6.
82. Frazier KB, Sarrett DC. Wear resistance of dual-cured rein luting agents. Am J Dent 1995;8:161-4.
83. Kawai K, Isenberg BP, Leinfelder KF. Effect of gap dimension on composite resin cement wear. Quintessence Int 1994;25:53-8.
84. Chung CH, Brendlinger EJ, Brendlinger DL, Bernal V, Mante FK. Shear bond strengths of two resin-modified glass ionomer cements to porcelain. Am J Orthod Dentofacial Orthop 1999;115:533-5.
85. Berry T, Barghi N, Chung K. Effect of water storage on the silanization in porcelain repair strength. J Oral Rehabil 1999;26:459-63.
86. Roulet JF, Soderholm KJ, Longmate J. Effects of treatment and storage conditions on ceramic/composite bond strength. J Dent Res 1995;74:381-7.
87. Kato H, Matsumura H, Tanaka T, Atsuta M. Bond strength and durability of porcelain bonding systems. J Prosthet Dent 1996;75:163-8.
88. Matsumura H, Kato H, Atsuta M. Shear bond strength to feldspathic porcelain of two luting cements in combination with three surface treatments. J Prosthet Dent 1997;78:511-7.
89. Eikenberg S, Shurtleff J. Effect of hydration on bond strength of a silane-bonded composite to porcelain after seven months. Gen Dent 1996;44:58-61.
90. Appeldoorn RE, Wilwerding TM, Barkmeier WW. Bond strength of composite resin to porcelain with newer generation porcelain repair systems. J Prosthet Dent 1993;70:6-11.
91. Leibrock A, Degenhart M, Behr M, Rosentritt M, Handel G. In vitro study of the effect of thermo- and load-cycling on the bond strength of porcelain repair systems. J Oral Rehabil 1999;26:130-7.
92. Øilo G. Bond strength testing - what does it mean? Int Dent J 1993;43:492-8.
93. Chadwick RG, Mason AG, Sharp W. Attempted evaluation of three porcelain repair systems - what are we really testing? J Oral Rehabil 1998;25:610-5.
94. Della Bona A, van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res 1995;74:1591-6.
95. McLean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J 1965;119:251-67.
96. Seghi RR, Sorensen JA. Relative flexural strength of six new ceramic materials. Int J Prosthodont 1995;8:239-46.
97. Andersson M, Oden A. A new all-ceramic crown: a dense-sintered, high-purity alumina coping with porcelain. Acta Odontol Scand 1993;51:59-64.
98. Zeng K, Oden A, Rowcliffe D. Flexure tests on dental ceramics. Int J Prosthodont 1996;9:434-9.
99. Zeng K, Oden A, Rowcliffe D. Evaluation of mechanical properties of dental ceramic core materials in combination with porcelains. Int J Prosthodont 1998;11:183-9.
100. Ashizuka M, Kiyohara H, Okuno T, Kubota Y. Fatigue behavior of tetragonal zirconia polycrystals (Y-TZP) containing 2 and 4 mol% Y2O3 (Part 2). J Ceram Soc Jpn Inter Ed 1988;96:731-6.
101. Taira M, Nomura Y, Wakasa K, Yamaki M, Matsui A. Studies on fracture toughness of dental ceramics. J Oral Rehabil 1990;17:551-63.
102. Giordano RA 2nd, Pelletier L, Campbell S, Pober R. Flexural strength of an infused ceramic, glass ceramic, and feldspathic porcelain. J Prosthet Dent 1995;73:411-8.
103. Kern M, Thompson VP. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent 1995;73:240-9.
104. Sadoun M, Asmussen E. Bonding of resin cements to an aluminous ceramic: a new surface treatment. Dent Mater 1994;10:185-9.
105. Kern M, Thompson VP. Sandblasting and silica-coating of dental alloys: volume loss, morphology and changes in the surface composition. Dent Mater 1993;9:151-61.
106. Ozcan M, Alkumru HN, Gemalmaz D. The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont 2001;14:335-9.
107. Isidor F, Stokholm R, Ravnholt G. Tensile bond strength of resin luting cement to glass infiltrated porous aluminium oxide cores (In-Ceram). Eur J Prosthodont Restor Dent 1995;3:199-202.
108. Madani M, Chu FC, McDonald AV, Smales RJ. Effects of surface treatments on shear bond strengths between a resin cement and an alumina core. J Prosthet Dent 2000;83:644-7.
109. Awliya W, Oden A, Yaman P, Dennison JP, Razzoog ME. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol Scand 1998;56:9-13.
110. Blixt M, Adamczak E, Linden LA, Oden A, Arvidson K. Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements. Int J Prosthodont 2000;13:221-6.
111. Derand P, Derand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 2000;13:131-5.
112. Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998;14:64-71.
113. Wegner SM, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000;2:139-47.
114. Weinstein M, Katz S, Weinstein AB. Permanent Manufacturing Corporation, assignee. Fused Porcelain-to-Metal Teeth. U.S. Patent No. 3,052,982. September 11, 1962.
115. McLaughlin G. Porcelain veneers. Dent Clin North Am 1998;42:653-6, ix.
116. Culp L. Empress 2. First year clinical results. J Dent Technol 1999;16:12-5.
117. Mackert J Jr, Evans Al. Effect of cooling rate on leucite volume fraction in dental porcelains. J Dent Res 1991;70:137-9.
118. McKinney JE, Wu W. Chemical softening and wear of dental composites. Dent Res 1985;64:1326-31.
119. Ortengren U, Andersson F, Elgh U, Terselius B, Karlsson S. Influence of pH and storage time on the sorption and solubility behaviour of three composite resin materials. J Dent 2001;29:35-41.
120. Palmer DS, Barco MT, Billy EJ. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent 1992;67:325-7.
121. Harrison A, Moores GE. Influence of abrasive particle size and contact stress on the wear rate of dental restorative materials. Dent Mater 1985;1:14-8.
122. Paul SJ, Pietrobon N, Scharer P. The new In-Ceram Spinell system - a case report. Int J Periodontics Restorative Dent 1995;15:520-7.
123. Piotrowski PR. Comparative studies on the adhesion of a silicone elastomer to a chromium-cobalt dental alloy. Eur J Prosthodont Restor Dent 2001;9:141-6.
124. Wada T. Development of a new adhesive material and its properties. In: Gettleman L, Vrijhoef M, Uchiyama Y, editors. Proceedings of the international symposium on adhesive prosthodontics, 1986 June 24, Amster-dam, Netherlands. Chicago: Academy of Dental Materials; 1986. p. 9-18.
125. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 2001;14:231-8.
126. McLaren EA. All-ceramic alternatives to conventional metal-ceramic restorations. Compend Contin Educ Dent 1998;19:307-8, 310, 312.
127. Yildirim M, Edelhoff D, Hanisch O, Spiekermann H. Ceramic abutments - a new era in achieving optimal esthetics in implant dentistry. Int J Periodontics Restorative Dent 2000;20:81-91.
128. Koutayas SO, Kern M. All-ceramic posts and cores: the state of the art. Quintessence Int 1999;30:383-92.
129. Ahmad I. Zirconium oxide post and core system for the restoration of an endodontically treated incisor. Pract Periodontics Aesthet Dent 1999;11:197-204.
130. Blatz MB. Comprehensive treatment of traumatic fracture and luxation injuries in the anterior permanent dentition. Pract Proced Aesthet Dent 2001;13:273-9.
131. Fradeani M, Aquilano A, Barducci G. Aesthetic restoration of endodontically treated teeth. Pract Periodontics Aesthet Dent 1999;11:761-8.
132. Meyenberg KH, Luthy H, Scharer P. Zirconia posts: a new all-ceramic concept for nonvital abutment teeth. J Esthet Dent 1995;7:73-80.
133. Burke FJ. Fracture resistance of teeth restored with dentin-bonded crowns: the effect of increased tooth preparation. Quintessence Int 1996;27:115-21.