Recent advances in ceramics for dentistry

Critical Reviews in Oral Biology and Medicine

Volumn 7, Issue 2, 1996, Pages 134-143

  Denry, Isabelle L ^a  

^a OHIO STATE UNIVERSITY   (United States)

Author keywords

Ceramics; crystalline phases; dental porcelain

Indexed keywords

ALUMINUM OXIDE; GLASS; HYDROXYAPATITE; LITHIUM DERIVATIVE; MAGNESIUM; ZIRCONIUM OXIDE;

CERAMICS; DENTAL SURGERY; DENTISTRY; ELASTICITY; MACHINE; PRIORITY JOURNAL; REVIEW; STRENGTH; TOOTH PROSTHESIS;

EID: 0029795477     PISSN: 10454411     EISSN: None     Source Type: Journal    
DOI: 10.1177/10454411960070020201     Document Type: Review

References (80)

1. Anusavice KJ (1993). Recent developments in restorative dental ceramics. J Am Dent Assoc 124:72-84.
2. Anusavice KJ, Hojjatie B (1991). Effect of thermal tempering on strength and crack propagation behavior of feldspathic porcelains. J Dent Res 70:1009-1013.
3. Anusavice KJ, Gray A, Shen C (1991). Influence of initial flaw size on crack growth in air-tempered porcelain. J Dent Res 70:131-136.
4. Anusavice KJ, Shen C, Vermost B, Chow B (1992). Strengthening of porcelain by ion exchange subsequent to thermal tempering. Dent Mater 8:149-152.
5. Anusavice KI, Hojjatie B, Chang TC (1994a). Effect of grinding and fluoride-gel exposure on strength of ion-exchanged porcelain. J Dent Res 73:1444-1449.
6. Anusavice KI, Zhang NZ, Moorhead JE (1994b). Influence of colorants on crystallization and mechanical properties of lithia-based glass ceramics. Dent Mater 10:141-146.
7. Asaoka K, Yoshida K, Sakamaki K (1992). Effect of transient stress on acoustic emission behaviour during firing of dental porcelain. J Mater Sci 27:3118-3122.
8. Ban S, Anusavice KJ (1990). Influence of test method on failure stress of brittle dental materials. J Dent Res 69:1791-1799.
9. Barreiro MM, Vicente EE (1993). Kinetic of isothermal phase transformations in a dental porcelain. J Mater Sci: Mater Med 4:431-436.
10. Barreiro MM, Riesgo O, Vicente EE (1989). Phase identification in dental porcelains for ceramo-metallic restorations. Dent Mater 5:51-57.
11. Campbell SD, Kelly JR (1989). The influence of surface preparation on the strength and surface microstructure of a cast dental ceramic. Int J Prosthodont 2:459-466.
12. Claus H, Rauter H (1989). The structure and microstructure of dental porcelain in relationship to the firing conditions. Int J Prosthodont 2:376-384.
13. Daniels WH, Moore RE (1975). Crystallization of a tetrasilicic fluormica glass. J Am Ceram Soc 58:217-221.
14. DeHoff PH, Anusavice KJ (1992). Analysis of tempering stresses in bilayered porcelain discs. J Dent Res 71:1139-1144.
15. DeHoff PH, Vontivillu SB, Wang Z, Anusavice KJ (1994). Stress relaxation behavior of dental porcelains at high temperatures. Dent Mater 10:178-184.
16. Denry I, Rosenstiel SF (1993). Flexural strength and fracture toughness of Dicor glass-ceramic after embedment modification. J Dent Res 72:572-576.
17. Denry IL, Rosenstiel SF (1995). Phase transformations in feldspathic dental porcelains. In: Bioceramics: materials and applications. Fischman G, Clare A, Hench L, editors. Westerville: The American Ceramic Society, pp. 149-156.
18. Denry IL, Rosenstiel SF, Holloway JA, Niemiec MS (1993). Enhanced chemical strengthening of feldspathic dental porcelain. J Dent Res 72:1429-1433.
19. Dong JK, Luthy H, Wohlwend A, Schärer P (1992). Heatpressed ceramics: technology and strength. Int J Prosthodont 5:9-16.
20. Dunn B, Levy MN, Reisbick MH (1977). Improving the fracture resistance of dental ceramic. J Dent Res 56:1209-1213.
21. Eden GT, Kacicz JM (1987). Dicor crown strength improvement due to bonding (abstract). J Dent Res 66:207.
22. Eidenbenz S, Lehner CR, Schärer P (1994). Copy milling ceramic inlays from resin analogs: a practicable approach with the Celay system. Int J Prosthodont 7:134-142.
23. Fairhurst CW, Lockwood PE, Ringle RD, Thompson WO (1992). The effect of glaze on porcelain strength. Dent Mater 8:203-207.
24. Griggs JA, Thompson JY, Anusavice KJ (1995). Effect of flaw size and auto-glaze treatment on porcelain strength (abstract). J Dent Res 74:219.
25. Grossman DG (1972). Machinable glass-ceramic based on tetrasilicic mica. J Am Ceram Soc 55:446-449.
26. Grossman DG (1991). Structure and physical properties of Dicor/MGC glass-ceramic. In: Proceedings of the international symposium on computer restorations. Mörmann WH, editor. Chicago: Quintessence, pp. 103-114.
27. Grossman DG, Johnson JLM, inventors (1987). Corning Glass Works, assignee. Glass-ceramic compositions for dental constructs. US patent 4,652,312. Mar 24.
28. Grossman DG, Nelson JW (1987). The bonded Dicor crown (abstract). J Dent Res 66:206.
29. Hobo S, Iwata T (1985). Castable apatite ceramics as a new biocompatible restorative material. Quintessence Int 2:135-141.
30. Hojjatie B, Anusavice KJ (1993). Effects of initial temperature and tempering medium on thermal tempering of dental porcelains. J Dent Res 72:566-571.
31. Höland W, Frank M, Rheinberger V (1995). Surface crystallization of leucite in glasses. J Non Cryst Solids 180:292-307.
32. Hondrum SO (1992). A review of the strength properties of dental ceramics. J Prosthet Dent 67:859-865.
33. ISO (1984). International standard 6872-1984. Dental ceramic. 1st ed. Geneva, Switzerland: International Organization for Standardization, pp. 1-14.
34. Jones DW, Wilson HJ (1975). Some properties of dental ceramics. J Oral Rehabil 2:379-396.
35. Katz S, inventor (1989). American Thermocraft Corp., assignee. High strength feldspathic dental porcelains containing crystalline leucite. US patent 4,798,536. Jan 17.
36. Kelly JR, Campbell SD, Bowen HK (1989). Fracture-surface analysis of dental ceramics. J Prosthet Dent 62:536-541.
37. Kelly JR, Giordano R, Pober R, Cima MJ (1990). Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont 3:430-440.
38. Kingery WD, Bowen HK, Uhlmann DR (1976). Introduction to ceramics. 2nd ed. New York: John Wiley & Sons.
39. Kon M, Ishikawa K, Kuwayama N (1990). Effects of zirconia addition on fracture toughness and bending strength of dental porcelains. Dent Mater J 9:181-192.
40. Kon M, Kawano F, Asaoka K, Matsumoto N (1994). Effect of leucite crystals on the strength of glassy porcelain. Dent Mater J 13:138-147.
41. Luthy H, Dong JK, Wohlwend A, Schärer P (1993). Effects of veneering and glazing on the strength of heat-pressed ceramics. Schweiz Monatsschr Zahnmed 103:1257-1260.
42. Mackert JR Jr (1988). Effects of thermally induced changes on porcelain-metal compatibility. In: Perspectives in dental ceramics. Proceedings of the Fourth International Symposium on Ceramics. Preston JD, editor. Chicago: Quintessence Publishing Co., pp. 53-64.
43. Mackert JR Jr, Evans AL (1991a). Effect of cooling rate on leucite volume fraction in dental porcelains. J Dent Res 70:137-139.
44. Mackert JR Jr, Evans AL (1991b). Quantitative x-ray diffraction determination of leucite thermal instability in dental porcelain. J Am Ceram Soc 74:450-453.
45. Mackert JR Jr, Butts MB, Fairhurst CW (1986a). The effect of the leucite transformation on dental porcelain expansion. Dent Mater 2:32-36.
46. Mackert JR Jr, Butts MB, Morena R, Fairhurst CW (1986b). Phase changes in a leucite-containing dental porcelain frit. J Am Ceram Soc 69(C):69-72.
47. Mackert JR Jr, Rueggeberg FA, Lockwood PE, Evans AL, Thompson WO (1994). Isothermal anneal effect on microcrack density around leucite particles in dental porcelain. J Dent Res 73:1221-1227.
48. McLaren EA, Sorensen JA (1995). High strength alumina crowns and fixed partial dentures generated by copy-milling technology. Quintessence Dent Technol 18:31-38.
49. McLean JW, Hughes TH (1965). The reinforcement of dental porcelain with ceramic oxides. Br Dent J 119:251-267.
50. McLean JW, Kedge MI (1987). High-strength ceramics. Quintessence Int 18:97-106.
51. McLean JW, Jeansonne EE, Chiche G, Pinault A (1994). All-ceramic crowns and foil crowns. In: Esthetics of anterior fixed prosthodontics. Chiche G, Pinault A, editors. Chicago: Quintessence Publishing Co., Inc., pp. 97-113.
52. McMillan PW (1979). Glass-ceramics. 2nd ed. London: Academic Press, pp. 1-12.
53. Meyer JM, O'Brien WJ, Yu CU (1976). Sintering of dental porcelain enamels. J Dent Res 55:696-699.
54. Michalske TA, Freiman SW (1982). A molecular interpretation of stress corrosion in silica. Nature 295:511-512.
55. 2 additions. J Am Ceram Soc 69(C):75-77.
56. Morena R, Lockwood PE, Fairhurst CW (1986b). Fracture toughness of commercial dental porcelains. Dent Mater 2:58-62.
57. Myers ML, Ergle JW, Fairhurst CW, Ringle RD (1994). Fatigue failure parameters of IPS-Empress porcelain. Int J Prosthodont 7:549-553.
58. O'Brien WJ (1985). Magnesia ceramic jacket crowns. Dent Clin North Am 29:719-724.
59. O'Brien WJ, Groh CL, Boenke KM, Mora GP, Tien TY (1993). The strengthening mechanism of a magnesia core ceramic. Dent Mater 9:242-245.
60. Parsell DE, Anusavice KJ (1994). Optimization of glass-ceramic crystallization based on DTA exotherm analysis. Dent Mater 10:167-171.
61. Peters MCRB, De Vree JHP, Brekelmans WAM (1993). Distributed crack analysis of ceramic inlays. J Dent Res 72:1537-1542.
62. Piché PW, O'Brien WJ, Groh CL, Boenke KM (1994). Leucite content of selected dental porcelains. J Biomed Mater Res 28:603-609.
63. Pröbster L (1992). Compressive strength of two modern all-ceramic crowns. Int J Prosthodont 5:409-414.
64. Pröbster L, Diehl J (1992). Slip-casting alumina ceramics for crown and bridge restorations. Quintessence Int 23:25-31.
65. Scherrer SS, de Rijk WG, Belser UC, Meyer JM (1994). Effect of cement film thickness on the fracture resistance of a machinable glass-ceramic. Dent Mater 10:172-177.
66. Schmid M, Fischer J, Salk M, Strub J (1992). Mikrogefüge leucit-verstärkter glaskeramiken. Schweiz Monatsschr Zahnmed 102:1046-1053.
67. Seghi RR, Sorensen JA (1995). Relative flexural strength of six new ceramic materials. Int J Prosthodont 8:239-246.
68. Seghi RR, Crispin BC, Mito W (1990a). The effect of ion-exchange on the flexural strength of feldspathic porcelains. Int J Prosthodont 3:130-134.
69. Seghi RR, Daher T, Caputo A (1990b). Relative flexural strength of dental restorative ceramics. Dent Mater 6:181-184.
70. Stookey SD (1959). Catalyzed crystallization of glass in theory and practice. Glastechn Ber 32:1-8.
71. Thompson JY, Anusavice KJ, Naman A, Morris HF (1994). Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res 73:1824-1832.
72. 2-modified dental glass ceramics. J Mater Sci 28:6127-6135.
73. Utsumi Y, Sakka S (1970). Strength of glass-ceramics relative to crystal size. J Am Ceram Soc 53:286-287.
74. Vaidyanathan TK, Vaidyanathan I, Prasad A (1989). Properties of a new dental porcelain. Scanning Microsc 3:1023-1033.
75. Wagner WC, O'Brien WJ, Mora GP (1992). Fracture-surface analysis of a glaze-strengthened magnesia core material. Int J Prosthodont 5:475-478.
76. Wall JG, Cipra DL (1992). Alternative crown systems: Is the metal-ceramic crown always the restoration of choice? Dent Clin North Am 36:765-782.
77. Weibull W (1939). A statistical theory of the strength of materials. Ing Vetensk Akad Proc 151:1-45.
78. Weinstein M, Weinstein AB, inventors (1962). J.M. Ney Company, assignee. Fused porcelain-to-metal teeth. US Patent 3,052,982, September 11.
79. Wohlwend A, Strub JR, Schärer P (1989). Metal ceramic and all-porcelain restorations: current considerations. Int J Prosthodont 2:13-26.
80. Wolf WD, Francis LF, Lin CP, Douglas WH (1993). Melt-infiltration processing and fracture toughness of alumina-glass dental composites. J Am Ceram Soc 76:2691-2694.