Stresses and distortions within zirconia-fixed dental prostheses due to the veneering process

Acta Biomaterialia

Volumn 5, Issue 8, 2009, Pages 3231-3239

  Dittmer, Marc Philipp ^a   Borchers, Lothar ^a   Stiesch, Meike ^a   Kohorst, Philipp ^a  

^a HANNOVER MEDICAL SCHOOL   (Germany)

Author keywords

Distortion; FDP; Finite element analysis; Thermal stress; Zirconia

Indexed keywords

DENTAL PROSTHESES; FILLING; RESTORATION; VENEERS; ZIRCONIA;

ALL-CERAMIC; DENTAL RESTORATIONS; FINITE ELEMENT ANALYSE; FIXED DENTAL PROSTHESIS; IN-VITRO; REPLICA TECHNIQUE; THREE DIMENSIONAL FINITE ELEMENT MODEL;

FINITE ELEMENT METHOD;

ZIRCONIUM OXIDE;

ARTICLE; CERAMICS; COMPRESSIVE STRENGTH; COOLING; DENTAL CARE; FINITE ELEMENT ANALYSIS; IN VITRO STUDY; MECHANICAL STRESS; PRIORITY JOURNAL; SIMULATION; STATISTICAL MODEL; TENSILE STRENGTH; TOOTH PROSTHESIS;

COMPRESSIVE STRENGTH; COMPUTER SIMULATION; DENTAL PROSTHESIS; DENTAL PROSTHESIS DESIGN; ELASTIC MODULUS; FINITE ELEMENT ANALYSIS; MODELS, THEORETICAL; STRESS, MECHANICAL; TENSILE STRENGTH; ZIRCONIUM;

EID: 70349105523     PISSN: 17427061     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actbio.2009.04.025     Document Type: Article

References (39)

1. Kohorst P., Herzog T.J., Borchers L., and Stiesch-Scholz M. Load-bearing capacity of all-ceramic posterior four-unit fixed partial dentures with different zirconia frameworks. Eur J Oral Sci 115 (2007) 161-166
2. Kohorst P., Dittmer M.P., Borchers L., and Stiesch-Scholz M. Influence of cyclic fatigue in water on the load-bearing capacity of dental bridges made of zirconia. Acta Biomater 4 (2008) 1440-1447
3. Tinschert J., Schulze K.A., Natt G., Latzke P., Heussen N., and Spiekermann H. Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont 21 (2008) 217-222
4. Edelhoff D., Beuer F., Weber M., and Johnen C. HIP zirconia fixed partial dentures-clinical results after 3 years of clinical service. Quintessence Int 39 (2008) 459-471
5. Hannink R.H.J., Kelly P.M., and Muddle B.C. Transformation toughening in zirconia-containing ceramics. J Am Ceram Soc 83 (2000) 461-487
6. Besimo C.E., Spielmann H.P., and Rohner H.P. Computer-assisted generation of all-ceramic crowns and fixed partial dentures. Int J Comput Dent 4 (2001) 243-262
7. Balkaya M.C., Cinar A., and Pamuk S. Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems. J Prosthet Dent 93 (2005) 346-355
8. Gemalmaz D., and Alkumru H.N. Marginal fit changes during porcelain firing cycles. J Prosthet Dent 73 (1995) 49-54
9. Isgrò G., Wang H., Kleverlaan C.J., and Feilzer A.J. The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs. Dent Mater 21 (2005) 649-655
10. Felton D.A., Kanoy B.E., Bayne S.C., and Wirthman G.P. Effect of in vivo crown margin discrepancies on periodontal health. J Prosthet Dent 65 (1991) 357-364
11. Tuntiprawon M., and Wilson P.R. The effect of cement thickness on the fracture strength of all-ceramic crowns. Aust Dent J 40 (1995) 17-21
12. Bridger D.V., and Nicholls J.I. Distortion of ceramometal fixed partial dentures during the firing cycle. J Prosthet Dent 45 (1981) 507-514
13. Buchanan W.T., Svare C.W., and Turner K.A. The effect of repeated firings and strength on marginal distortion in two ceramometal systems. J Prosthet Dent 45 (1981) 502-506
14. Castellani D., Baccetti T., Clauser C., and Bernardini U.D. Thermal distortion of different materials in crown construction. J Prosthet Dent 72 (1994) 360-366
15. DeHoff P.H., Barret A.A., Lee R.B., and Anusavice K.J. Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries. Dent Mater 24 (2008) 744-752
16. DeHoff P.H., Anusavice K.J., and Götzen N. Viscoelastic finite element analysis of an all-ceramic fixed partial denture. J Biomech 39 (2006) 40-48
17. Fairhurst C.W., Anusavice K.J., Hashinger D.T., Ringle R.D., and Twiggs S.W. Thermal expansion of dental alloys and porcelains. J Biomed Mater Res 14 (1980) 435-446
18. Aboushelib M.N., Feilzer A.J., De Jager N., and Kleverlaan C.J. Prestresses in bilayered all-ceramic restorations. J Biomed Mater Res B Appl Biomater 87 (2008) 139-145
19. Holmes J.R., Bayne S.C., Holland G.A., and Sulik W.D. Considerations in measurement of marginal fit. J Prosthet Dent 62 (1989) 405-408
20. Tinschert J., Natt G., Mautsch W., Spiekermann H., and Anusavice K.J. Marginal fit of alumina- and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent 26 (2001) 367-374
21. Reich S., Wichmann M., Nkenke E., and Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 113 (2005) 174-179
22. Coli P., and Karlsson S. Fit of a new pressure-sintered zirconium dioxide coping. Int J Prosthodont 17 (2004) 59-64
23. Boening K.W., Wolf B.H., Schmidt A.E., Kastner K., and Walter M.H. Clinical fit of Procera AllCeram crowns. J Prosthet Dent 84 (2000) 419-424
24. Harris I.R., and Wickens J.L. A comparison of the fit of spark-eroded titanium copings and cast gold alloy copings. Int J Prosthodont 7 (1994) 348-355
25. Laurent M., Scheer P., Dejou J., and Laborde G. Clinical evaluation of the marginal fit of cast crowns - validation of the silicone replica method. J Oral Rehabil 35 (2008) 116-122
26. Rahme H.Y., Tehini G.E., Adib S.M., Ardo A.S., and Rifai K.T. In vitro evaluation of the "replica technique" in the measurement of the fit of Procera crowns. J Contemp Dent Pract 9 (2008) 25-32
27. Kohorst P., Brinkmann H., Borchers L., and Stiesch M. Marginal accuracy of four-unit zirconia fixed dental prostheses (FDPs) fabricated with different CAD/CAM systems. Eur J Oral Sci 117 (2009) 319-325
28. Vigolo P., and Fonzi F. An in vitro evaluation of fit of zirconium-oxide-based ceramic four-unit fixed partial dentures, generated with three different CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles. J Prosthodont 17 (2008) 621-626
29. Shearer B., Gough M.B., and Setchell D.J. Influence of marginal configuration and porcelain addition on the fit of in-ceram crowns. Biomaterials 17 (1996) 1891-1895
30. Sulaiman F., Chai J., Jamelson L., and Wozniak W. A comparison of the marginal fit of in-ceram, IPS Empress, and Procera crowns. Int J Prosthodont 10 (1997) 478-484
31. Dittmer M.P., Kohorst P., Borchers L., and Stiesch-Scholz M. Finite element analysis of a four-unit all-ceramic fixed partial denture. Acta Biomater 5 (2008) 1349-1355
32. Nielsen J.P., and Tuccillo J.J. Calculation of interfacial stress in dental porcelain bonded to gold alloy substrate. J Dent Res 51 (1972) 1043-1047
33. Coffey J.P., Anusavice K.J., DeHoff P.H., Lee R.B., and Hojjatie B. Influence of contraction mismatch and cooling rate on flexural failure of PFM systems. J Dent Res 67 (1988) 61-65
34. DeHoff P.H., and Anusavice K.J. Viscoelastic stress analysis of thermally compatible and incompatible metal-ceramic systems. Dent Mater 14 (1998) 237-245
35. DeHoff P.H., Anusavice K.J., and Vontivillu S.B. Analysis of tempering stresses in metal-ceramic disks. J Dent Res 75 (1996) 743-751
36. Steiner P., Kelly J.R., and Giuseppetti A.A. Compatibility of ceramic-ceramic systems for fixed prosthodontics. Int J Prosthodont 10 (1997) 375-380
37. De Jager N., Pallav P., and Feilzer A.J. The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns. Dent Mater 21 (2005) 242-251
38. Taskonak B., Mecholsky J.J., and Anusavice K.J. Residual stresses in bilayer dental ceramics. Biomaterials 26 (2005) 3235-3241
39. Taskonak B., Borges G.A., Mecholsky J.J., Anusavice K.J., Moore B.K., and Yan J. The effect of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic. Dent Mater 24 (2008) 1149-1155