Design verification and validation in product lifecycle

CIRP Annals - Manufacturing Technology

Volumn 59, Issue 2, 2010, Pages 740-759

  Maropoulos, P G ^a   Ceglarek, D ^b  

^a University of Bath   (United Kingdom)

^b UNIVERSITY OF WARWICK   (United Kingdom)

Author keywords

Design; Lifecycle management; Validation; Verification

Indexed keywords

COHERENT ANALYSIS; COMPLEX PRODUCTS; CUSTOMER PERCEPTIONS; DESIGN VERIFICATION; DIGITAL DESIGNS; DIGITAL DOMAIN; ENGINEERING DESIGN; INDUSTRIAL REQUIREMENTS; LIFE-CYCLE MANAGEMENT; PRELIMINARY DESIGN; PRODUCT-LIFE-CYCLE; PRODUCTION PERFORMANCE; PROTOTYPE VERIFICATION; RESEARCH TRENDS; STANDARD DEFINITIONS; SYSTEM DESIGN; VALIDATION; VERIFICATION AND VALIDATION;

PRODUCT DESIGN;

EID: 77955559150     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2010.05.005     Document Type: Article

References (243)

1. P. Gu, M. Hashemian, and A.Y.C. Nee Adaptable Design CIRP Annals-Manufacturing Technology 53 2 2004 539 557
2. M.M. Tseng, T. Kjellberg, and S.C.Y. Lu Design in the New E-Commerce Era CIRP Annals-Manufacturing Technology 52 2 2003 509 519
3. N.P. Suh Complexity in Engineering CIRP Annals-Manufacturing Technology 54 2 2005 46 63
4. H.A. ElMaraghy Changing and Evolving Products and Systems-Models and Enablers H.A. ElMaraghy, Changeable and Reconfigurable Manufacturing Systems. 2008 Springer-Verlag Publ 25 45
5. I. Babuska, and J.T. Oden Verification and Validation in Computational Engineering and Science: Basic Concepts Computer Methods in Applied Mechanics and Engineering 193 36-38 2004 4057 4066
6. R. Plant, and R. Gamble Methodologies for the Development of Knowledge-based Systems Knowledge Engineering Review 18 1 2003 47 81
7. H.S. Jagdev, J. Browne, and P. Jordan Verification and Validation Issues in Manufacturing Models Computers in Industry 25 3 1995 331 353
8. W. Dzida, and R. Freitag Making Use of Scenarios for Validating Analysis and Design IEEE Transactions on Software Engineering 24 12 1998 1182 1196
9. N.A. Allen, C.A. Shaffer, and L.T. Watson Building Modeling Tools That Support Verification Validation, and Testing for the Domain Expert Proceedings of the 2005 Winter Simulation Conference Orlando, FL 2005 419 426
10. A. Geraci IEEE Standard Computer Dictionary: Compilation of IEEE Standard Computer Glossaries 1991
11. ASME (2006) Guide for Verification and Validation in Computational Solid Mechanics, Ptc 60/V&V 10.
12. U.S. Department of Defence (2008) Documentation of Verification, Validation & Accreditation (VV&A) for Models and Simulations.
13. U.S. Department of Navy (2004) Modelling and Simulation Verification, Validation, and Accreditation Implementation Handbook.
14. American Institute of Aeronautics and Astronautics (AIAA) (1998) Guide for the Verification and Validation of Computational Fluid Dynamics Simulations, AIAA-G-077-1998.
15. U.S. Food and Drug Administration (FDA) (2002) General Principles of Software Validation, Final Guidance for Industry and FDA Staff.
16. ISO 9000 (2005) Quality Management Systems: Fundamentals and Vocabulary.
17. Joint Committee for Guides in Metrology (JCGM) (2008) VIM: International Vocabulary of Metrology-Basic and General Concepts and Associated Terms.
18. International Organization of Legal Metrology (OIML) (2009) International Vocabulary of Terms in Legal Metrology (VIML).
19. Global Harmonization Task Force (GHTF) (2004) Quality Management System-Process Validation Guidance, 2 ed.
20. SAE Aerospace ARP4754a (2009) Aerospace Recommended Practice.
21. R.G. Sargent Validation and Verification of Simulation Models Proceedings of the 2005 Winter Simulation Conference 2005 130 143
22. ISO/TR 14638 (1995) Geometrical Product Specification (GPS)-Masterplan.
23. ASME Y14.5 (2009) Dimensioning and Tolerancing. The American Society of Mechanical Engineers.
24. ISO 10303-1 (1994) Industrial Automation Systems and Integration-Product Data Representation and Exchange. Part 1: Overview and Fundamental Principles.
25. L. Mathieu, and J.Y. Dantan Geospelling: A Common Language for Geometrical Product Specification and Verification to Express Method Uncertainty Proceedings of 8th CIRP Seminar on Computer Aided Tolerancing NC, USA 2003 70 79
26. J.Y. Dantan, A. Ballu, and L. Mathieu Geometrical Product Specifications-Model for Product Life Cycle Computer-Aided Design 40 2008 493 501
27. P. Heping, and J. Xiangqian Evaluation and Management Procedure of Measurement Uncertainty in New Generation Geometrical Product Specification (GPS) Measurement 42 5 2009 653 660
28. L. De Chiffre, P. Lonardo, H. Trumpold, D.A. Lucca, G. Goch, C.A. Brown, J. Raja, and H.N. Hansen Quantitative Characterisation of Surface Texture CIRP Annals-Manufacturing Technology 49 2 2000 635 652
29. A. Balsamo, M. Di Ciommo, R. Mugno, B.I. Rebaglia, E. Ricci, and R. Grella Evaluation of CMM Uncertainty through Monte Carlo Simulations CIRP Annals-Manufacturing Technology 48 1 1999 425 428
30. V. Srinivasan Computational Metrology for the Design and Manufacture of Product Geometry: A Classification and Synthesis Journal of Computing and Information Science in Engineering 7 1 2007 3 9
31. DD ISO/TS 17450-2 (2002) Geometrical Product Specifications (GPS)-General Concepts. Part 2: Basic Tenets, Specifications, Operators and Uncertainties.
32. P. Chiabert, F. Lombardi, and M. Orlando Benefits of Geometric Dimensioning and Tolerancing Journal of Materials Processing Technology 78 1-3 1998 29 35
33. Z.S. Shen, J.J. Shah, and J.K. Davidson Analysis Neutral Data Structure for GD&T Journal of Intelligent Manufacturing 19 4 2008 455 472
34. Z. Kong, W. Huang, and A. Oztekin Variation Propagation Analysis for Multistation Assembly Process with Consideration of GD&T Factors Journal of Manufacturing Science and Engineering 131 5 2009 10.1115/1111.4000094
35. V. Srinivasan Standardizing the Specification, Verification, and Exchange of Product Geometry: Research, Status and Trends Computer-Aided Design 40 2008 738 749
36. K.E. Rennels Current Methodologies for Geometric Dimensioning and Tolerancing Proceedings of the Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference 2003 565 569
37. D. Watts The "GD&T Knowledge Gap" In Industry Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference Las Vegas, NV 2007 597 604
38. Y. Zhang, and M. Yang A Coordinate SPC Model for Assuring Designated Fit Quality Via Quality-oriented Statistical Tolerancing Computers and Industrial Engineering 57 1 2009 73 79
39. ISO 10303-11 (1994) Industrial Automation Systems and Integration-Product Data Representation and Exchange. Part 11: Description Methods: EXPRESS Language Reference Manual.
40. ISO CD 10303-219 (2005) Industrial Automation Systems and Integration-Product Data Representation and Exchange. Part 219: Application Protocol: Dimensional Inspection Information Exchange.
41. Bock C (2006) Interprocess Communication in the Process Specification Language, NISTIR 7348, NIST, Gaithersburg, MD.
42. ISO 18629-1 (2004) Industrial Automation Systems and Integration-Process Specification Language. Part 1: Overview and Basic Principles.
43. M. Matsuda, E. Arai, N. Nakano, H. Wakai, H. Takeda, M. Takata, and H. Sasaki An Interoperability Framework and Capability Profiling for Manufacturing Software Knowledge and Skill Chains in Engineering and Manufacturing Information Infrastructure in the Era of Global Communications 2005 Springer Boston pp. 75-84
44. DMIS 4.0 (2001) Dimensional Measuring Interface Standard, ANSI/CAM-I104.0.
45. DML 2.0 (2004) Dimensional Markup Language.
46. International Association of Co-ordinate Measuring Machine Manufacturers (2009) Dimensional Measurement Equipment Interface.
47. BS EN ISO 8062 (2007) Geometrical Product Specifications (GPS)-Dimensional and Geometrical Tolerances for Moulded Parts Part 1: Vocabulary.
48. BS EN ISO 10135 (2009) Geometrical Product Specifications (GPS)-Drawing Indications for Moulded Parts in Technical Product Documentation (Tpd).
49. ISO 14649-1 (2002) Industrial Automation Systems and Integration-Physical Device Control-Data Model for Computerized Numerical Controllers. Part 1: Overview and Fundamental Principles.
50. ISO WD 14649-16 (2004) Industrial Automation Systems and Integration-Physical Device Control-Data Model for Computerized Numerical Controllers. Part 16: Data for Touch Probing Based Inspection.
51. P. Vichare, A. Nassehi, and S.T. Newman A Unified Manufacturing Resource Model for Representation of CNC Machine Tools Proceeding of the IMechE Part B: Journal of Engineering Manufacture 223 5 2009 463 483
52. P. Vichare, A. Nassehi, S. Kumar, and S.T. Newman A Unified Manufacturing Resource Model for Representation of CNC Machining Systems Elements Robotics and Computer Integrated Manufacturing 25 6 2009 999 1007
53. ISO 13584-42 (1998) Industrial Automation Systems and Integration. Part 42: Parts Library, Methodology for Structuring Parts Families.
54. ISO 13399-1 (2006) Cutting Tool Data Representation and Exchange. Part 1: Overview, Fundamental Principles and General Information Model.
55. ASME B5.59-2 (2005) Information Technology for Machine Tools. Part 2: Data Specification for Properties of Machine Tools for Milling and Turning (Draft).
56. BS EN ISO 10360 (2001) Geometrical Product Specifications (GPS)-Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM). Part 1: Vocabulary.
57. BS EN ISO 14978 (2006) Geometrical Product Specifications (GPS)-General Concepts and Requirements for GPS Measuring Equipment.
58. ISO 10303-209 (2001) Industrial Automation Systems and Integration-Product Data Representation and Exchange. Part 209: Application Protocol: Composite and Metallic Structural Analysis and Related Design.
59. ISO WD 10303-237 (2003) Industrial Automation Systems and Integration-Product Data Representation and Exchange. Part 237: Application Protocol: Fluid Dynamics Data.
60. R. Ramanathan, and J. Yunfeng Incorporating Cost and Environmental Factors in Quality Function Deployment Using Data Envelopment Analysis Omega 37 3 2009 711 723
61. G. Büyüközkan, T. Ertay, C. Kahraman, and D. Ruan Determining the Importance Weights for the Design Requirements in the House of Quality Using the Fuzzy Analytic Network Approach International Journal of Intelligent Systems 19 5 2004 443 461
62. Y. Shimomura, T. Hara, and T. Arai A Service Evaluation Method Using Mathematical Methodologies CIRP Annals-Manufacturing Technology 57 1 2008 437 440
63. L.H. Chen, and W.C. Ko Fuzzy Linear Programming Models for New Product Design Using QFD with FMEA Applied Mathematical Modelling 33 2 2009 633 647
64. D. Ullman The Mechanical Design Process 1992 McGraw-Hill New York
65. D. Kim, and P. Xirouchakis CO2DE: A Decision Support System for Collaborative Design Journal of Engineering Design 21 1 2010 31 48
66. Y.M. Deng, G. Britton, and S. Tor Constraint-based Functional Design Verification for Conceptual Design Computer-Aided Design 32 2000 889 899
67. R.B. Stone, D.A. McAdams, and V.J. Kayyalethekkel A Product Architecture-based Conceptual DFA Technique Design Studies 25 3 2004 301 325
68. K. Ulrich, and S. Eppinger Product Design and Development 2004 McGraw-Hill New York
69. A. Ericsson, and G. Erixon Controlling Design Variants: Modular Product Platforms 1999 ASME Press New York
70. D. Ceglarek, and J. Shi Dimensional Variation Reduction for Automotive Body Assembly Manufacturing Review 8 2 1995 139 154
71. D.E. Whitney The Role of Key Characteristics in the Design of Mechanical Assemblies Assembly Automation 26 4 2006 315 322
72. L. Mathieu, and B. Marguet Integrated Design Method to Improve Producibility Based on Product Key Characteristics and Assembly Sequences Annals of the CIRP 50 1 2001 85 88
73. L.Y. Zheng, C.A. McMahon, L. Li, L. Ding, and J. Jamshidi Key Characteristics Management in Product Lifecycle Management: A Survey of Methodologies and Practices Proceedings of the IMechE Part B: Journal of Engineering Manufacture 222 8 2008 989 1008
74. A.C. Thornton A Mathematical Framework for the Key Characteristic Process Research in Engineering Design 11 3 1999 145 157
75. A.C. Thornton Variation Risk Management: Focusing Quality Improvements in Product Development and Production 2004 Wiley NJ
76. W. Dai, and X.Q. Tang Quality Plan Model for Product Development Proceedings of the 38th International Conference on Computers & Industrial Engineering Bejing, China 2008 1535 1541
77. D.E. Whitney Mechanical Assemblies: Their Design, Manufacture and Role in Product Development 2004 Oxford University Press USA
78. H. Wang, and D. Ceglarek Quality-driven Sequence Planning and Line Configuration Selection for Compliant Structure Assemblies CIRP Annals-Manufacturing Technology 54 1 2005 31 35
79. R. Suri, D.D. Frey, and K.N. Otto Key Inspection Characteristics Journal of Mechanical Design 123 4 2001 479 485
80. P. Maropoulos, D. Zhang, S. Rolt, P. Chapman, and B. Rogers Integration of Measurement Planning with Aggregate Product Modelling for Spacecraft Design and Assembly Proceedings of the IMechE Part B: Journal of Engineering Manufacture 220 10 2006 1687 1695
81. P. Maropoulos, D. Zhang, P. Chapman, D. Bramall, and B Rogers Key Digital Enterprise Technology Methods for Large Volume Metrology and Assembly Integration International Journal of Production Research 45 7 2007 1539 1559
82. T.-C. Kuo, S.H. Huang, and H.-C. Zhang Design for Manufacture and Design for X: Concepts Applications and Perspectives. Computers and Industrial Engineering 41 3 2001 241 260
83. P. Boothroyd, and W.A. Knight Product Design for Manufacture and Assembly 2002 CRC Press New York, USA
84. M.M. Andreasen Design for Assembly 1988 Springer-Verlag New York, USA
85. G. Pahl, W. Beitz, and K. Wallace Engineering Design: A Systematic Approach 1996 Springer New York, USA
86. M.P. Reik, R.I. McIntosh, S.J. Culley, A.R. Mileham, and G.W. Owen A Formal Design for Changeover Methodology. Part 1: Theory and Background Proceedings of the IMechE Part B: Journal of Engineering Manufacture 220 8 2006 1225 1235
87. K. Yang, and B.S. Ei-Haik Design for Six Sigma: A Roadmap for Product Development 2003 McGraw-Hill
88. G.G. Wang Definition and Review of Virtual Prototyping Journal of Computing and Information Science in Engineering 2 3 2002 232 237
89. H. Wörn, D. Frey, and J. Keitel Digital Factory-Planning and Running Enterprises of the Future Proceedings of the 26th Annual Conference of the IEEE Electronics Society 2000 1286 1291
90. B. Rooks A Shorter Product Development Time with Digital Mock-up Assembly Automation 18 1 1998 34 38
91. R. Garbade, and W.R. Dolezal DMU at Airbus-Evolution of the Digital Mock-up (DMU) at Airbus to the Centre of Aircraft Development User Keynote, the Future of Product Development Proceedings of the 17th CIRP Design Conference 2007 3 12
92. M.J. Pratt, B.D. Amnderson, and T. Ranger Towards the Standardized Exchange of Parameterized Feature-based CAD Models Computer-Aided Design 37 12 2005 1251 1265
93. ISO 10303-109 (2004) Industrial Automation Systems and Integration-Product Data Representation and Exchange. Part 109: Integrated Application Resource: Kinematic and Geometric Constraints for Assembly Models.
94. M. Contero, P. Company, C. Vila, and N. Aleixios Product Data Quality and Collaborative Engineering IEEE Computer Graphics and Applications 22 3 2002 32 42
95. ISO 10303-105 (1996) Industrial Automation Systems and Integration-Product Data Representation and Exchange. Part 105: Integrated Application Resources: Kinematics.
96. T. Kjellberg, A. Von Euler-Chelpina, M. Hedlinda, M. Lundgrena, G. Sivarda, and D. Chena The Machine Tool Model-A Core Part of the Digital Factory Annals of the CIRP 58 1 2009 425 428
97. M.S. Govindaluri, S. Shin, and B.R. Cho Tolerance Optimization Using the Lambert W Function: An Empirical Approach International Journal of Production Research 42 16 2004 3235 3251
98. P.K. Singh, P.K. Jain, and S.C. Jain Important Issues in Tolerance Design of Mechanical Assemblies. Part 1: Tolerance Analysis Proceedings of the IMechE Part B: Journal of Engineering Manufacture 223 10 2009 1225 1247
99. P.K. Singh, P.K. Jain, and S.C. Jain Important Issues in Tolerance Design of Mechanical Assemblies. Part.2: Tolerance Synthesis Proceedings of the IMechE Part B: Journal of Engineering Manufacture 223 10 2009 1249 1287
100. J.-Y. Dantan, and A.-J. Qureshi Worst-case and Statistical Tolerance Analysis Based on Quantified Constraint Satisfaction Problems and Monte Carlo Simulation Computer-Aided Design 41 1 2009 1 12
101. S.D. Nigam, and J.U. Turner Review of Statistical Approaches to Tolerance Analysis Computer-Aided Design 27 1 1995 6 15
102. Z. Shen, G. Ameta, J.J. Shah, and J.K. Davidson A Comparative Study of Tolerance Analysis Methods Journal of Computing and Information Science in Engineering 5 3 2005 247 256
103. C.Y. Lin, W.H. Huang, M.C. Jeng, and J.L. Doong Study of an Assembly Tolerance Allocation Model Based on Monte Carlo Simulation Journal of Materials Processing Technology 70 1-3 1997 9 16
104. M.F. Spotts Dimensioning Stacked Assemblies Machine Design 50 9 1978 60 63
105. H. Chun Multibody Approach for Tolerance Analysis and Optimization of Mechanical Systems Journal of Mechanical Science and Technology 22 2 2008 276 286
106. L. Rivest, C. Fortin, and A. Desrochers Tolerance Modeling for 3D Analysis-presenting a Kinematic Formulation Proceedings of 3rd CIRP Seminars on Computer Aided Tolerancing France 1993 51 74
107. P. Bourdet, and E. Ballot Geometrical Behaviour Laws for Computer Aided Tolerancing Proceedings of 4th CIRP Seminars on Computer Aided Tolerancing Tokyo 1995 143 154
108. L. Laperriere, and A Desrochers Modeling Assembly Quality Requirements Using Jacobian or Screw Transforms: A Comparison Proceedings of the IEEE International Symposium on Assembly and Task Planning 2001 330 336
109. A. Desrochers, W. Ghie, and L Laperriere Application of a Unified Jacobian-Torsor Model for Tolerance Analysis ASME Journal of Computing and Information Science in Engineering 3 1 2003 2 14
110. W. Ghie, L. Laperrière, and A. Desrochers Statistical Tolerance Analysis Using the Unified Jacobian-Torsor Model International Journal of Production Research 2009 10.1080/00207540902824982
111. S. Shin, M.S. Govindaluri, and B.R Cho Integrating the Lambert Function to a Tolerance Optimization Problem Quality and Reliability Engineering International 21 8 2005 795 808
112. B.-W. Cheng, and S. Maghsoodloo Optimization of Mechanical Assembly Tolerances by Incorporating Taguchi's Quality Loss Function Journal of Manufacturing Systems 14 4 1995 264 276
113. T.W. Benanzer, R.V. Grandhi, and W.P. Krol Reliability-based Optimization of Design Variance to Identify Critical Tolerances Advances in Engineering Software 40 4 2009 305 311
114. A. Ballu, J.Y. Plantec, and L. Mathieu Geometrical Reliability of Over Constrained Mechanisms with Gaps Annals of the CIRP 57 1 2008 159 162
115. A. Jeang Computer-aided Tolerance Synthesis with Statistical Method and Optimization Techniques Quality and Reliability Engineering International 17 2 2001 131 139
116. M. Gadallah, and H.A. ElMaraghy A New Algorithim for Combinatorial Optimization: Application to Tolerance Synthesis with Optimum Process Selection H.A. ElMaraghy, Geometric Design Tolerancing: Theories, Standards and Applications 1998 Kluwer Academic Publ 265 281
117. R. Curran, G. Gomis, S. Castagne, J. Butterfield, T. Edgar, C. Higgins, and C. McKeever Integrated Digital Design for Manufacture for Reduced Life Cycle Cost International Journal of Production Economics 109 1-2 2007 27 40 (Pubitemid 46977201)
118. O.W. Salomons, F.J.A.M.V. Houten, and H.J.J. Kals Review of Research in Feature-based Design Journal of Manufacturing Systems 12 1993 113 132
119. S. Subrahmanyam, and M. Wozny An Overview of Automatic Feature Recognition Techniques for Computer-aided Process Planning Computers in Industry 26 1 1995 1 21
120. A.C. Lin, S.Y. Lin, and S.B. Cheng Extraction of Manufacturing Features from a Feature-based Design Model International Journal of Production Research 35 12 1997 3249 3288
121. H.A. ElMaraghy, and W.H ElMaraghy Computer-aided Inspection Planning (Caip) J.J. Shah, Advances in Feature Based Manufacturing 1994 Elsevier Publ 363 396
122. K. Case Using a Design by Features CAD System for Process Capability Modeling Computer Integrated Manufacturing Systems 7 1 1994 39 49
123. T.N. Wong, and K.W. Wong Feature-based Design by Volumetric Machining Features International Journal of Production Research 36 10 1998 2839 2862
124. Z. Gu, Y.F. Zhang, and A.Y.C. Nee Identification of Important Features for Machining Operations Sequence Generation International Journal of Production Research 35 8 1997 2285 2307
125. L. Laperriere, and H.A. ElMaraghy Assembly Sequences Planning for Simulaneous Engineering Applications Internation Journal of Advanced Manufacturing Technology 9 1994 231 244
126. L. Qiao, X.Y. Wang, and S.C. Wang A GA-based Approach to Machining Operation Sequencing for Prismatic Parts International Journal of Production Research 38 14 2000 3283 3303
127. W.D. Li, S.K. Ong, and A.Y.C. Nee Hybrid Genetic Algorithm and Simulated Annealing Approach for the Optimization of Process Plans for Prismatic Parts International Journal of Production Research 40 8 2002 1899 1922
128. S.K. Ong, J. Ding, and A.Y.C. Nee Hybrid GA and SA Dynamic Set-up Planning Optimization International Journal of Production Research 40 18 2002 4697 4719
129. A. Azab, and H.A. ElMaraghy A Novel Qap Mathematical Programming Formulation for Process Planning in Reconfigurable Manufacturing Proceedings of the 4th International CIRP Conference on Digital Enterprise Technology (DET'07) Bath, UK 2007 259 268
130. J. Zhao, and S. Masood An Intelligent Computer-aided Assembly Process Planning System International Journal of Advanced Manufacturing Technology 15 1999 332 337
131. H. Wang, and D. Ceglarek Quality-driven Sequence Planning for Compliant Structure Assemblies Annals of the CIRP 54 1 2005 31 35
132. Y. Jun, J.H. Liu, R.X. Ning, and Y. Zhang Assembly Process Modeling for Virtual Assembly Process Planning International Journal of Computer Integrated Manufacturing 18 6 2005 442 451
133. H.J. Bullinger, M. Richter, and K.A Seidel Virtual Assembly Planning Human Factors and Ergonomics in Manufacturing 10 2000 331 341
134. S. Jayaram, U. Jayaram, Y. Wang, H. Tirumali, K. Lyons, and P. Hart Vade: A Virtual Assembly Design Environment Computer Graphics and Applications IEEE 19 6 1999 44 50
135. A. Banerjee, P. Banerjee, N. Ye, and F. Dech Assembly Planning Effectiveness Using Virtual Reality Presence 8 2 1999 204 217
136. S.K. Ong, Y. Pang, and A.Y.C. Nee Augmented Reality Aided Assembly Design and Planning Annals of the CIRP 56 1 2007 49 52
137. J. Butterfield, S. Crosby, R. Curran, M. Price, C.G. Armstrong, S. Raghunathan, D. McAleenan, and C. Gibson Optimization of Aircraft Fuselage Assembly Process Using Digital Manufacturing Journal of Computing and Information Science in Engineering 7 3 2007 269 275
138. S. Esque, J. Mattila, M. Siuko, M. Vilenius, J. Järvenpää, L. Semeraro, M. Irving, and C. Damiani The Use of Digital Mock-ups on the Development of the Divertor Test Platform 2 Fusion Engineering and Design 84 2-6 2009 752 756
139. G. Wöhlke, and E. Schiller Digital Planning Validation in Automotive Industry Computers in Industry 56 4 2005 393 405
140. A. Bernard, and A. Fischer New Trends in Rapid Product Development CIRP Annals-Manufacturing Technology 51 2 2002 635 652
141. A. Rosochowski, and A. Matuszak Rapid Tooling: The State of the Art Journal of Materials Processing Technology 106 1-3 2000 191 198
142. D. Ceglarek, H. Li, and Y. Tang Modeling and Optimization of Fixture for Handling Compliant Sheet Metal Parts Transactions of ASME Journal of Manufacturing Science and Engineering 123 3 2001 473 480
143. Z. Kong, and D. Ceglarek Fixture Workspace Synthesis for Reconfigurable Assembly Systems Journal of Manufacturing Systems 25 1 2006 25 38
144. T. Phoomboplab, and D. Ceglarek Process Yield Improvement through Optimal Design of Fixture Layout in 3d Multi-station Assembly Systems ASME Transactions: Journal of Manufacturing Science and Engineering 130 2008 061005
145. W. Huang, J. Lin, M. Bezdecny, Z. Kong, and D. Ceglarek Stream-of-Variation (SOVA) Modeling I: A Generic 3d Variation Model for Rigid Body Assembly in Single Station Assembly Processes ASME Transactions on Journal of Manufacturing Science and Engineering 129 4 2007 821 831 (Pubitemid 47437108)
146. W. Huang, J. Lin, Z. Kong, and D Ceglarek Stream-of-Variation (SOVA) Modeling II: A Generic 3D Variation Model for Rigid Body Assembly in Multi Station Assembly Processes ASME Transactions on Journal of Manufacturing Science and Engineering 129 4 2007 832 842 (Pubitemid 47437109)
147. T. Phoomboplab, and D. Ceglarek Design Synthesis Framework for Dimensional Management in Multi-Station Assembly Systems Annals of the CIRP 56 1 2007 153 158 (Pubitemid 46898269)
148. F. Zhao, X. Xu, and S.Q. Xie Computer-aided Inspection Planning-The State of the Art Computers in Industry 60 2009 453 466
149. M.W. Cho, H. Lee, G.S. Yoon, and J. Choi A Feature-based Inspection Planning System for Coordinate Measuring Machines The International Journal of Advanced Manufacturing Technology 26 2005 1078 1087
150. Y.J. Lin, R. Mahabaleshwarkar, and E. Massina CAD-based CMM Dimensional Inspection Path Planning: A Generic Algorithm Robotica 19 2 2001 137 148
151. T.H. Hopp CAD-directed Inspection Annals of the CIRP 33 1 1984 357 361
152. H.A. ElMaraghy, and P. Gu Expert System for Inspection Planning Annals of the CIRP 36 1 1987 85 89
153. H.A. ElMaraghy Evolution and Future Prespectives of CAPP Annals of the CIRP 42 1993 739 751
154. H.A. ElMaraghy Reconfigurable Process Plans for Responsive Manufacturing Systems P.F. Cunha, P.G. Maropoulos, Digital Enterprise Technology: Perspectives and Future Challenges 2007 Springer US, Boston 35 44
155. H. Lee, M.W. Cho, G.S. Yoon, and J.H. Choi A Computer-Aided Inspection Planning System for On-machine Measurement-Part I: Global Inspection Planning KSME International Journal 18 8 2004 1349 1357 (Pubitemid 39596761)
156. A. Limaiem, and H.A. ElMaraghy CATIP: A Computer-aided Tactile Inspection Planning System International Journal of Production Research 37 2 1999 447 465
157. S.G. Zhang, A. Ajmal, J. Wootton, and A. Chisholm A Feature-Based Inspection Process Planning System for Coordinate Measuring Machine Journal of Materials Processing Technology 107 2000 111 118
158. C.Y. Hwang, C.Y. Tsai, and C.A. Chang Efficient Inspection Planning for Coordinate Measuring Machines The International Journal of Advanced Manufacturing Technology 23 9-10 2004 732 742
159. G. Moroni, W. Polini, and Q. Semeraro Knowledge Based Method for Touch Probe Configuration in an Automated Inspection System Journal of Materials Processing Technology 76 1-3 1998 153 160
160. C.G. Lu, D. Morton, M.H. Wu, and P. Myler Genetic Algorithm Modelling and Solution of Inspection Path Planning on a Coordinate Measuring Machine The International Journal of Advanced Manufacturing Technology 15 6 1999 409 416
161. J. Beg, and M.S Shunmugam Application of Fuzzy Logic in the Selection of Part Orientation and Probe Orientation Sequencing for Prismatic Parts International Journal of Production Research 41 12 2003 2799 2815
162. J. Beg, and M.S. Shunmugam An Object Oriented Planner for Inspection of Prismatic Parts: OOPIPP The International Journal of Advanced Manufacturing Technology 19 12 2002 905 916
163. A. Mohib, A. Azab, and H. ElMaraghy Feature-based Hybrid Inspection Planning: A Mathematical Programming Approach International Journal of Computer Integrated Manufacturing 22 1 2009 13 29
164. D. Baxter, J. Gao, K. Case, J. Harding, B. Young, S. Cochrane, and S. Dani An Engineering Design Knowledge Reuse Methodology Using Process Modeling Research in Engineering Design 18 1 2007 37 48
165. P. Maropoulos, D. Bramall, and K. McKay Assessing the Manufacturability of Early Product Designs Using Aggregate Process Models Proceedings of IMechE Part B: Journal of Engineering Manufacture 217 2003 1203 1214
166. P. Maropoulos, Y. Guo, J. Jamshidi, and B. Cai Large Volume Metrology Process Models: A Framework for Integrating Measurement with Assembly Planning Annals of the CIRP 57 2008 477 480
167. P. Maropoulos, B. Rogers, P. Chapman, K. McKay, and D. Bramall A Novel Digital Enterprise Technology Framework for the Distributed Development and Validation of Complex Products Annals of the CIRP 52 1 2003 389 392
168. B. Cai, Y. Guo, J. Jamshidi, and P.G. Maropoulos Large Volume Measurability Analysis for Early Design Proceedings of the 5th International Conference on Digital Enterprise Technology Nantes, France 2008 807 819
169. ISO/IEC Guide (1995) General Metrology. Part 3: Guide to the Expression of Uncertainty in Measurement (GUM).
170. ASME B89.4.19 (2006) Performance Evaluation of Laser-based Spherical Coordinate Measurement Systems.
171. G. Peggs, P. Maropoulos, E. Hughes, A. Forbes, S. Robson, M. Ziebart, and B. Muralikrishnan Recent Developments in Large-scale Dimensional Metrology Proceedigns of IMechE Part B: Journal of Engineering Manufacture 223 6 2009 571 595
172. W. Estler, K. Edmundson, G. Peggs, and D. Parker Large-scale Metrology-An Update Annals of the CIRP 51 2 2002 587 609
173. B. Cai, W. Dai, J. Muelaner, and P. Maropoulos Measurability Characteristics Mapping for Large Volume Metrology Instruments Selection Proceedings of the 7th International Conference on Manufacturing Research (ICMR09) Warwick, UK 2009 438 442
174. J. Muelaner, B. Cai, and P. Maropoulos Large Volume Metrology Instrument Selection and Measurability Analysis Proceedings of IMechE Part B: Journal of Engineering Manufacture 2010 10.1243/09544054JEM09541676
175. W. Cuypers, N. Van Gestel, A. Voet, J. Kruth, J. Mingneau, and P. Bleys Optical Measurement Techniques for Mobile and Large-scale Dimensional Metrology Optical Measurements 47 3-4 2009 292 300
176. A.J. Morris The Qualification of Safety Critical Structures by Finite Element Analysis Methods Proceedigns of IMechE Part G: Journal of Aerospace Engineering 210 1996 203 208
177. M. Rossi, and M. Meo On the Estimation of Mechanical Properties of Single-walled Carbon Nanotubes by Using a Molecular-mechanics Based Fe Approach Composites Science and Technology 69 9 2009 1394 1398
178. M. Guida, M. Meo, M. Riccio, and F. Marulo Analysis of Bird Impact on a Composite Tailplane Leading Edge Applied Composite Materials 15 4-6 2008 241 257
179. J.D. Denton, and W.N. Dawes Computational Fluid Dynamics for Turbomachinery Design Proceedings of IMechE Part C: Journal of Mechanical Engineering Science 213 1998 107 124
180. A. Samad, and K.Y Kim Shape Optimization of an Axial Compressor Blade by Multi-objective Genetic Algorithm Proceedings of IMechE Part A: Journal of Power and Energy 222 6 2008 599 611
181. J.W. Chew, and N.J. Hills Computational Fluid Dynamics for Turbomachinery Internal Air Systems. Philosophical Transactions of the Royal Society (Series A): Theme Issue Computational Fluid Dynamics in Aerospace Engineering 365 2007 2587 2611
182. P.R. Spalart, and S.R. Allmaras A One-equation Turbulence Model for Aerodynamic Flows Recherche Aerospatiale 1 1994 5 21
183. M.L. Shur, M.K. Strelets, A.K. Travin, and P.R. Spalart Turbulence Modeling in Rotating and Curved Channels: Assessing the Spalart-Shur Correction AIAA Journal 38 5 2000 784 792
184. W.N. Dawes Rapid Prototyping Design Optimization Using Flow Sculpting Journal of Turbomachinery 130 3 2008 10.1115/1111.2777178
185. S. Morton, M. Steenman, R. Cummings, and J. Forsythe Des Grid Resolution Issues for Vortical Flows on a Delta Wing and an F/A-18c AIAA Journal 2003 2003-1103
186. DD CEN ISO/TS 17450-1 (2007) Geometrical Product Specifications (GPS)-General Concepts. Part 1: Model for Geometrical Specification and Verification.
187. BS EN ISO 14253-1 (1999) Geometrical Product Specifications (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment. Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications.
188. E. Savio, L.D. Chiffre, and R. Schmitt Metrology of Freeform Shaped Parts CIRP Annals-Manufacturing Technology 56 2 2007 810 835
189. M.R. Shortis, T.A. Clarke, and S. Robson Practical Testing of the Precision and Accuracy of Target Image Centring Algorithms Proceedings of the SPIE 2598 1995 65 76
190. R.G. Dorsch, G. Hausler, and J.M. Herrmann Laser Triangulation: Fundamental Uncertainty in Distance Measurement Applied Optics 33 7 1994 1306 1314
191. J.M Huntley Simple Model for Image-plane Polychromatic Speckle Contrast Applied Optics 38 11 1999 2212 2215
192. DD CE ISO/TS 12780-2 (2007) Geometrical Product Specifications (GPS)-Straightness Part 2: Specification Operators.
193. DD CE ISO/TS 12181-2 (2007) Geometrical Product Specifications (GPS)-Roundness Part 2: Specification Operators.
194. DD CE ISO/TS 12180-2 (2007) Geometrical Product Specifications (GPS)-Cylindricity Part 2: Specification Operators.
195. W. Kimberley The Drive for Quality Automotive Engineer 29 9 2004 40 42
196. W.H. Quin, L.H. Hsieh, and G. Seliqer On the Optimization of Automobile Panel Fitting Proceedings of the IEEE conference on Robotics and Automation Minneapolis, MN, USA 1996 1268 1274
197. P.E. Ciddor Refractive Index of Air: New Equations for the Visible and near Infrared Applied Optics 35 1996 1566 1573
198. J. Muelaner, Z. Wang, J. Jamshidi, P.G. Maropoulos, A.R. Mileham, E.B. Hughes, and A.B. Forbes iGPS-An Initial Assessment of Technical and Deployment
199. BS EN ISO 1101 (2005) Geometrical Product Specifications (GPS)-Tolerances of Form, Orientation, Location and Run-Out.
200. M.F. Ashby Materials Selection in Mechanical Design 2005 Elsevier Butterworth-Heinemann
201. CES EduPack (2009) Materials Selection Software. Granta Design.
202. J.M. Hodgkinson Mechanical Testing of Advanced Fibre Composites 2000 Woodhead Publishing Ltd
203. M.A. Sutton, S.R. McNeill, J.D. Helm, and Y.J. Chao P.K. Rastogi, Photomechanics 2000 Springer-Verlag 323 372
204. L.O. William, and G.T Timothy Verification and Validation in Computational Fluid Dynamics Progress in Aerospace Sciences 38 2002 209 272
205. N.M. Williams, Z. Wang, and I. Gursul Active Flow Control on a Nonslender Delta Wing Journal of Aircraft 45 6 2008 2100 2110
206. I. Gursul, Z. Wang, and E. Vardaki Review of Flow Control Mechanisms of Leading-edge Vortice Progress in Aerospace Sciences 43 2007 246 270
207. C.E. Willert, and M. Gharib Three-dimensional Particle Imaging with a Single Camera Experiments in Fluids 12 1992 353 358
208. F. Pereira, M. Gharib, D. Dabiri, and D. Modarress Defocusing Digital Particle Image Velocimetry: A 3-Component 3-Dimensional DPIV Measurement Technique: Application to Bubbly Flows Experiments in Fluids 2002 78 84
209. A.R. Motorcu, and A. Gullu Statistical Process Control in Machining, a Case Study for Machine Tool Capability and Process Capability Materials and Design 27 5 2006 364 372
210. W. Huang, and Z. Kong Process Capability Sensitivity Analysis for Design Evaluation of Multi Station Assembly Systems Proceedings of the IEEE International Conference on Automation Science and Engineering Washington DC, USA 2008 400 405
211. C.M. Douglas, and H.W William An Overview of Six Sigma International Statistical Review 76 3 2008 329 346
212. G.J. Hahn Six Sigma: 20 Key Lessons Learned Quality and Reliability Engineering International 21 3 2005 225 233
213. W. Shiu, D. Apley, D. Ceglarek, and J. Shi Tolerance Allocation for Sheet Metal Assembly Using Beam-Based Model Transactions of IIE: Design and Manufacturing 35 4 2003 329 342
214. D. Ceglarek, and J. Shi Fixture Failure Diagnosis for Autobody Assembly Using Pattern Recognition ASME Transactions: Journal of Engineering Industry 118 1 1996 55 66
215. Y. Ding, D. Ceglarek, and J. Shi Fault Diagnosis of Multistage Manufacturing Assembly Processes by Using State Space Approach ASME Transactions: Journal of Manufacturing Science and Engineering 124 2 2002 313 322 (Pubitemid 35202620)
216. Q. Rong, J. Shi, and D. Ceglarek Adjusted Least Squares Approach for Diagnosis of Compliant Assemblies in the Presence of III-Conditioned Problems ASME Transactions: Journal of Manufacturing Science and Engineering 123 3 2001 453 461
217. G. Liu, and J. Hu Assembly Fixture Fault Diagnosis Using Designated Component Analysis ASME Transactions: Journal of Manufacturing Science and Engineering 127 2 2005 358 368
218. D. Apley, and H.Y. Lee Identifying Spatial Variation Patterns in Multivariate Manufacturing Processes: A Blind Separation Approach Technometrics 45 3 2003 220 234
219. D. Ceglarek, Prakash, A. Tripathi, and Z. Kong Diagnosis of Product Failures in Ill-Conditioned Multi-Station Assembly Systems Using Enhanced Pls Method Proceedings of the 40th CIRP International Manufacturing Systems Seminar Liverpool, UK 2007
220. D.A. Maisano, J. Jamshidi, F. Franceschini, P.G. Maropoulos, L. Mastrogiacomo, A.R. Mileham, and G.W. Owen A Comparison of Two Distributed Large-volume Measurement Systems: The Mobile Spatial Co-ordinate Measuring System and the Indoor Global Positioning System Proceedings of IMechE Part B: Journal of Engineering Manufacture 223 5 2009 511 521
221. M. Jahangirian, T. Eldabi, A. Naseer, L.K. Stergioulas, and T. Young Simulation in Manufacturing and Business: A Review European Journal of Operations Research 203 1 2010 1 13
222. S. Robinson Simulation-The Practice of Model Development and Use 2004 Wiley
223. J. Jamshidi, A. Kayani, P. Iravani, P.G. Maropoulos, and M.D Summers Manufacturing and Assembly Automation by Integrated Metrology Systems for Aircraft Wing Fabrication Proceedigns of IMechE Part B: Journal of Engineering Manufacture 224 1 2010 25 36
224. Y. Zhong, and B. Shirinzadeh Virtual Factory for Manufacturing Process Visualization Complexity International 12 2005 1 12
225. B. Johansson, J. Johnsson, and A. Kinnander Information Structure to Support Discrete Event Simulation in Manufacturing Systems Proceedings of the 2003 Winter Simulation Conference LA, USA 2003
226. G.Q. Huang, P.K. Wright, and S.T Newman Wireless Manufacturing: A Literature Review Recent Developments, and Case Studies. International Journal of Computer Integrated Manufacturing 22 7 2009 1 16
227. G.Q. Huang, Y.F. Zhang, Q.Y. Dai, O. Ho, and F.J. Xu Agent-based Workflow Management for RFID-enabled Real-time Reconfigurable Manufacturing Collaborative Design and Planning for Digital Manufacturing 2009 Springer London pp. 341-364
228. Y. Zhang, J. Pingyu, and G. Huang RFID-based Smart Kanbans for Just-in-Time Manufacturing International Journal of Materials and Product Technology 33 1/2 2008 170 184
229. Intermec Technologies Corporation (2007) White Paper on Supply Chain RFID: How It Works and Why It Pays.
230. Y.M. Lee, F. Cheng, and Y.T. Leung Exploring the Impact of RFID Supply Chain Dynamics Proceedings of the Winter Simulation Conference 2004 1145 1152
231. H.B. Jun, J.H. Shin, Y.S. Kim, D. Kiritsis, and P. Xirouchakis A Framework for RFID Applications in Product Lifecycle Management International Journal of Computer Integrated Manufacturing 22 7 2009 595 615
232. W. Cheung, and D. Shaefer Product Lifecycle Management: State-of-the-Art and Future Perspectives M. Cruz-Cunha, Enterprise Information Systems for Business Integration in Smes: Technological, Organizational, and Social Dimensions 2009 37 55
233. J. Stark Product Lifecycle Management: 21st Century Paradigm for Product Realisation 2005 Springer-Verlag London
234. F. Ameri, and D. Dutta Product Lifecycle Management: Closing the Knowledge Loops Computer-Aided Design and Applications 2 5 2005 577 590
235. M. Abramovici, and O. Sieg Status and Development Trends of Product Lifecycle Management Systems Proceedings of the IPPD 2002 Wroclaw 2002
236. S. Rachuri, E. Subrahmanian, A. Bouras, S.J. Fenves, S. Foufou, and R.D Sriram Information Sharing and Exchange in the Context of Product Lifecycle Management: Role of Standards Computer-Aided Design 40 7 2008 789 800
237. R.S. Peak, J. Lubell, V. Srinivasan, and S.C Waterbury STEP, XML, and UML: Complementary Technologies Journal of Computing and Information Science in Engineering 4 4 2004 379 390 (Pubitemid 40212490)
238. X.G Ming, J.Q. Yan, X.H. Wang, S.N. Li, W.F. Lu, Q.J. Peng, and Y.S. Ma Collaborative Process Planning and Manufacturing in Product Lifecycle Management Computers in Industry 59 2-3 2008 154 166
239. W. Gielingh An Assessment of the Current State of Product Data Technologies Computer-Aided Design 40 7 2008 750 759
240. S.G. Pickering, and C.J. Brace Automated Data Processing and Metric Generation for Driveability Analysis Proceedings of IMechE Part D: Journal of Automobile Engineering 221 4 2007 429 441
241. F. Zhao, X. Xu, and S. Xie Computer-Aided Inspection Planning-the State of the Art Computers in Industry 60 7 2009 453 466
242. J. Beaman, and E. Morse Experimental Evaluation of Software Estimates of Task Specific Measurement Uncertainty for Cmms Precision Engineering 34 1 2010 28 33
243. M. Germani, F. Mandorli, M. Mengoni, and R. Raffaeli CAD-based Environment to Bridge the Gap between Product Design and Tolerance Control Precision Engineering 34 1 2010 7 15