Stream-of-variation (SOVA) modeling - Part II: A generic 3D variation model for rigid body assembly in multistation assembly processes

Journal of Manufacturing Science and Engineering

Volumn 129, Issue 4, 2007, Pages 832-842

  Huang, Wenzhen ^a   Lin, Jijun ^b   Kong, Zhenyu ^c   Ceglarek, Dariusz ^d  

^a Department of Electrical and Computer Engineering   (United States)

^b Massachusetts Institute of Technology Cambridge   (United States)

^c Oklahoma State University   (United States)

^d UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ASSEMBLY; COMPUTER SIMULATION; DYNAMICAL SYSTEMS; ERROR ANALYSIS; MATHEMATICAL MODELS;

PART ERRORS; STATE TRANSITION DYNAMIC SYSTEMS; STREAM OF VARIATION ANALYSIS; TOOLING ERRORS;

VIBRATION ANALYSIS;

EID: 34548716850     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2738953     Document Type: Article

References (28)

1. Ceglarek, D., and Shi, J., 1995, "Dimensional Variation Reduction for Automotive Body Assembly," Manuf. Rev., 8(2), pp. 139-154.
2. Hu, S., and Wu, S. M., 1992, "Identifying Root Causes of Variation in Automobile Body Assembly Using Principal Component Analysis," Trans. NAMRI/SME, XX, pp. 311-316.
3. Apley, D. W., and Shi, J., 1998, "Diagnosis of Multiple Fixture Faults in Panel Assembly," ASME J. Manuf. Sci. Eng., 120(4), pp. 793-801.
4. Ding, Y., Ceglarek, D., and Shi, J., 2002, "Design Evaluation of Multi-Station' Manufacturing Processes by Using State Space Approach," ASME J. Mech. Des., 124(4), pp. 408-418.
5. Shiu, B. W., Apley, D., Ceglarek, D., and Shi, J., 2003, "Tolerance Allocation for Sheet Metal Assembly Using Beam-Based Model," IIE Trans., 35(4), pp. 329-342.
6. Ceglarek, D., Huang, W., Zhou, S., Ding, Y., Ramesh, K., and Zhou, Y., 2004, "Time-Based Competition in Manufacturing: Stream-of-Variation Analysis (SOVA) Methodology-Review," Int. J. Flexible Manufact. System, 16(1), pp. 11-44.
7. Camelio, J. A., and Hu, S. J., 2004, "Multiple Fault Diagnosis for Sheet Metal Fixtures Using Designated Component Analysis," ASME J. Manuf. Sci. Eng., 126(1), pp. 91-97.
8. Kong, Z., Ceglarek, D., and Huang, W., 2007, "Multiple Fault Diagnosis Method in Multi-Station Assembly Processes Using Orthogonal Diagonalization Analysis," Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, November 5-11; ASME Trans. J. of Manuf. Sci. Eng., accepted.
9. Huang, W., and Ceglarek, D., 2002, "Mode-Based Decomposition of Part Form Error by Discrete-Cosine-Accepted Transform With Implementation to Assembly and Stamping System With Compliant Parts," CIRP Ann., 51(1), pp. 21-26.
10. Huang, W., 2004, "Methodologies for Modeling and Analysis of Stream-of-Variation (SOVA) in Compliant and Rigid Assembly," Ph.D. thesis, University of Wisconsin-Madison, WI.
11. Huang, W., Ceglarek, D., and Zhou, Z. G., 2004, "Using Number-Theoretical Net Method (NT-Net) in Tolerance Analysis," Int. J. Flexible Manufact. Systems, 6(1), pp. 65-90.
12. Huang, W., and Ceglarek, D., 2005, "Model Complexity Reduction in Stream of Variation for Compliant Sheet Metal Assembly," 9th CIRP Int. Seminar on Computer Aided Tolerancing, Arizona, April, 11-12.
13. Huang, W., and Ceglarek, D., 2005, "Statistical Modal Analysis Methodology for Form Error Modeling," revised, IIE Trans., Quality & Reliability Engineering, submitted.
14. Huang, W., Lin, J., Bezdecny, M., Kong, Z., and Ceglarek, D., 2007, "Stream-Of-Variation Modeling I: A Generic 3D Variation Model for Rigid Body Assembly in Single Station Assembly Processes," by in Proc. of 2006 ASME MSEC; ASME Trans., Journal of Manufacturing Science and Engineering, in press.
15. Huang, W., Phoomboplab, T., and Ceglarek, D., 2006, "Explicit Yield Model (EYM) for Tolerance Synthesis of Large Scale Complex Assemblies," Proceedings of ASME MESC2006, Paper No. MSEC2006-21074.
16. Shalon, D., Gossard, D., Ulrich, K., and Fitzpatrick, D., 1992, "Representing Geometric Variations in Complex Structural Assemblies on CAD Systems," ASME Advances in Design Automation, 18th Annual ASME Design Automation Conference, Scottsdale, AZ, Vol. 2, pp. 121-132.
17. Shiu, B. W., Ceglarek, D., and Shi, J., 1996, "Multi-Stations Sheet Metal Assembly Modeling and Diagnostics," Trans. NAMRI/SME, Vol. XXIV, pp. 199-204.
18. Jin, J., and Shi, J., 1999, "State Space Modeling of Sheet Metal Assembly for Dimensional Control," ASME J. Manuf. Sci. Eng., 121, pp. 756-762.
19. Mantripragada, R., and Whitney, D. E., 1999, "Modeling and Controlling Variation Propagation in Mechanical Assemblies Using State Transition Models," IEEE Trans. Rob. Autom., 15(1), pp. 124-140.
20. Ceglarek, D., Shi, J., and Wu, S. M., 1994, "A Knowledge-Based Diagnostic Approach for the Launch of the Autobody Assembly Process," ASME J. Eng. Ind., 116(4), pp. 491-499.
21. Rong, Q., Ceglarek, D., and Shi, J., 2000, "Dimensional Fault Diagnosis for Compliant Beam Structure Assemblies," ASME J. Manuf. Sci. Eng., 122(4), pp. 773-780.
22. Rong, Q., Shi, J., and Ceglarek, D., 2001, "Adjusted Least Squares Approach for Diagnosis of Compliant Assemblies in the Presence of III-conditioned Problems," ASME J. Manuf. Sci. Eng., 123(3), pp. 453-461.
23. Fong, D. Y. T., and Lawless, J. F., 1998, "The Analysis of Process Variation Transmission With Multivariate Measurements," Stat. Sin., 8, pp. 151-164.
24. Lawless, J. F., Mackay, R. J., and Robinson, J. A., 1999, "Analysis of Variation Transmission in Manufacturing Processes - Part I," J. Quality Technol., 31(2), pp. 131-142.
25. Agrawal, R., Lawless, J. F., and Mackay, R. J., 1999, "Analysis of Variation Transmission in Manufacturing Processes - Part II," J. Quality Technol., 31(2), pp. 143-154.
26. Zhou, Z., Huang, W., and Zhang, L., 2001, "Sequential Algorithm Based on Number Theoretic Method for Statistical Tolerance Analysis and Synthesis," ASME J. Manuf. Sci. Eng., 123(3), pp. 490-493.
27. Shiu, B. W., Ceglarek, D., and Shi, J., 1997, "Flexible Beam-Based Modeling of Sheet Metal Assembly for Dimensional Control," Trans. NAMRI/SME, Vol. 25, pp. 49-54.
28. Shi, J., 2006, "Stream of Variation Modeling and Analysis for Multistage Manufacturing Processes," CRC Press, Boca Raton, FL.