New trends in rapid product development

CIRP Annals - Manufacturing Technology

Volumn 51, Issue 2, 2002, Pages 635-652

  Bernard, Alain ^a   Fischer, A ^b  

^a ECOLE CENTRALE DE NANTES   (France)

^b TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

Author keywords

Data integration; Rapid product development; Technology modeling

Indexed keywords

DATA STRUCTURES; KNOWLEDGE BASED SYSTEMS; LIFE CYCLE; PRODUCT DESIGN; PRODUCTION ENGINEERING; RAPID PROTOTYPING;

DATA INTEGRATION; MASS PRODUCTION; PRODUCT DATA MANAGEMENT;

PRODUCT DEVELOPMENT;

EID: 0036977914     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)61704-1     Document Type: Article

References (109)

1. Krause, F.-L., Kimura, F. Kjellberg, T. Lu, S.C.Y. Alting L. Elmaraghy, H.A. Eversheim, W. Iwata, K. Suh, N.P. Tripnis, V.A. Weck, M. Van Der Wolf, A.C.H. 1992, Product modeling, Annals of the CIRP, 42/2:695-706.
2. Krause, F.-L. Raupach, C., Kimura, F. Suzuki, H. 1996, Development of strategies for improving product development performance, Annals of the CIRP, 46/2: 691-692.
3. Smith, P. G. & Reinersten, D.G., 1995 Developing Products in Half the Time, Van Nostrand Reinhold.
4. Krause, F.-L. Ciesta, M., Stiel, Ch., Ulbrich, A., 1997, Enhanced rapid prototyping for faster product development processes, Annals of the CIRP, 46/1: 93-96.
5. Ippolito, R. Iuliano, L., Gatto, A., 1995, Benchmarking of rapid prototyping techniques in terms of dimensional accuracy and surface finish, Annals of the CIRP, 44/1: 157-160.
6. Levy, G., Schumacher, B., Schindel, R., Nursanto, W., 2001, Rapid tooling technologies enabling the integration of product design and production, ISEM XIII, Bilbao, Spain.
7. Levy, G., 2001, Layered-manufacturing: a powerful technology in the rapid product development cycle, uRapid, Amsterdam.
8. Krause, F. -L. Neumann, J., 2001, Haptic interaction with non-rigid materials for assembly and disassembly in product development, Annals of the CIRP, 50/1: 81-84.
9. Leu, M.C. Maiteh, B. Y., Blackmore, D., Fu, L., 2001, Creation of freeform solid models in virtual reality, Annals of the CIRP, 50/1: 73-76.
10. Bernard, A., Brissaud, D., 2001, Improvement of design efficiency by using fabricability criteria through e-design cognitive agents, CIRP Design Seminar, Stockholm, pp 153-157.
11. Fischer, A. Barhak, J., 2001, Tele-design for manufacturing, Annals of the CIRP, 50/1: 77-80.
12. Bernard, A., 1999, A review of State-of-the-Art Reverse Engineering, Time Compression Technologies, TCT'99 Europe, Nottingham, UK, pp 177-188.
13. Bernard, A., 1999, Reverse engineering for rapid product development: a state of the art, SPIE International Symposium on Three-Dimensional Imaging, Optical Metrology and Inspection V, Boston, pp 50-63, ISBN 0-8194-3428-0.
14. Bernard, A., 2000, coordinator, Rapid Production Development, International Journal on CAD/CAM and Computer Graphics, Vol. 15, N°2-3-4/2000, ISBN 2-7462-223-9.
15. Bernard, A., Taillandier, G., 1998, Le prototypage rapide (256 pages), Editions Hermè, ISBN 2-86601-673-4, avril 1998.
16. Gebhardt, A., 2000, Rapid Prototyping, ISBN 3-446-21242-6, Carl Hanser.
17. Chua, C.K., Chou, S.M., Wong, T.S., 1998, A study of the State-of-the-Art Rapid prototyping technologies, International Journal of Advanced Manufacturing Technology, 14: 146-152.
18. Bradley, C., Vickers, G. W., 1992, Automated rapid prototyping utilizing laser scanning and free-form machining, Annals of the CIRP, 41/1: 437-440.
19. STEP - RP, 2001, workshop, 21-22 February 2001, Funcha, Madere, Portugal.
20. Fadel, G., Morvan, S., 2002, Multimaterial representation and design issues, Software for Rapid prototyping, Chapter 6, Coordinator : Ian Gibson, ISBN 1-86058-360-1, publishing Ed., UK.
21. Patil, L., Dutta, D., Bhatt, A.D., Jurrens, K., Lyons, K., Pratt, M.J., Sriram, R.D., 2002, A proposed standard-based approach for representing heterogeneous objects for layered manufacturing, Rapid Prototyping Journal, Vol. 8, No. 3.
22. Bernard, A., Davillerd, S., Sibot, B., 1999, Computer-Aided Process Planning for automatic generation of 3D digitizing process for laser sensors, Solid Freeform Fabrication Symposium, Austin.
23. Yang, B., Leu M.C. 1999, Integration of rapid prototyping and electroforming for tooling application, Annals of the CIRP, 48/1: 119-122.
24. Cervellin, M., 2001, Stereolithographic processes applications in developing the gold product, Chimento Spa, via Serenissima 8/1, 36040 Grisignano di Zocco, Vicenza, Italy, designers@chimento.it.
25. Deon, J de Beer, 2001, South Africa RP 2000 - Successful South African Case Studies for Rapid Product Development, EURO RP' 2001, Paris, France, AFPR editor.
26. Xue, Y. and Gu, P., 1996, A review of rapid prototyping technologies and systems, Computer-Aided Design, 28 /4: 307-318.
27. Schaeffer, P. and Allanic, A., 1988, Nouvelle machine de fabrication par couches, 7èmes Assises Européennes du Prototypage Rapide, Technologies commercialisées - Nouveautés et applications, Paris, France, AFPR editor.
28. http://www.3dsystems.com/index_nav.asp?nav=newsevents&content=newsevents /newsrelease/index.asp.
29. Bernard, A., Perry, N., Delplace, J.C., Gabriel, S., 2002, CAD and Rapid Manufacturing Techniques for Design Optimization in Sand Casting Foundry, CIRP Design Seminar, Hong-Kong.
30. Jäger, H., Levy, G., Schindel, R., 2001, New technologies to shorten time to market: the impact of actual and future rapid prototyping technologies, IE&EM, Tianjin, China.
31. Dutta, D., Kumar, V., Pratt, M.J., Sriram, R.D., 1998, Towards STEP-based data transfer in layered manufacturing, Proc. of the 10th int. IFIP WG5.2/5.3 PROLAMAT conference, Trento, Italy.
32. Patil, L., Dutta, D., Bhatt, A.D., Jurrens, K., Lyons, K. Pratt, M. J. Sriram, R.D., 2000, Representation of heterogeneous objects in ISO 10303 (STEP). Proc. of the ASME Manufacturing Engineering Division 2000, Vol. 11, pp 355-364, Orlando.
33. Jackson, T.R., Patrikalakis, N.M., Sachs, E.M. Cima M.J., 1998, Modeling and designing components with Locally Controlled Composition, Solid Freeform Fabrication Symposium, Austin.
34. Zhongke, W., Soon, S.-H., Feng, L., 1999, NURBS-Based Volume Modeling, International Workshop on Volume Graphics, pp 321-330, Swansea, UK.
35. Rvachev, V.L., Sheiko, T.I., Shapiro, V., and Tsukanov, I., 2000, Transfinite Interpolation over Implicitly Defined Sets. Technical Report SAL 2000 - 1, Spatial Automation Laboratory, University of Wisconsin - Madison.
36. Park, S.-M., Crawford, R., Beaman, J., 2000, Functionally Graded Material Representation by Volumetric Multi-Texturing for Solid Freeform Fabrication, Solid Freeform Fabrication Symposium, Austin.
37. Kumar, A.V. and Wood, A., 1999, Representation and design of heterogeneous components, Solid Freeform Fabrication Symposium, pp 179-186, Austin.
38. Requicha, A.A.G. 1980, Representation of rigid solids - theory, methods and systems. ACM Computing Surveys, 12: 437-464.
39. Marsan, A., Kumar, V., Dutta, D., Pratt, M.J., 1998, An Assessment of Data Requirements and Data Transfer Formats for Layered Manufacturing, Technical Report NISTIR 6216, National Institute of Standards and Technology (NIST), Gaithersburg, Maryland.
40. Kumar, V. and Dutta, D., 1998, An Approach to Modeling and Representation of Heterogeneous Objects, ASME Journal of Mechanical Design, 120: 659-667.
41. Kullkarni, P. & Dutta, D., 1996, An Accurate Slicing Procedure for Layered Manufacturing, Computer-Aided Design Journal, 28/9: 683-697.
42. Lin, R-S, 2002, Adaptive Slicing for Rapid Prototyping, Software for Rapid prototyping, Chapter 5, Coordinator: Ian Gibson, ISBN 1-86058-360-1, pepublishing Ed., UK.
43. Jurrens, K., 1999, Standards for the rapid prototyping industry, Rapid Prototyping Journal, 5(4): 169-178.
44. ISO/WD 10303-11: 1998 ed 2. Industrial automation systems and integration - Product data representation and exchange - Part 11: Description methods: The EXPRESS language reference manual.
45. ISO 10303-514:1999. Industrial automation systems and integration - Product data representation and exchange - Part 514: Application interpreted construct: Advanced boundary representation.
46. ISO 10303-45: 1998. Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resources: Materials.
47. ISO 10303-42:2000. Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resources: Geometric and topological representation.
48. ISO/CD 10303-50:1999. Industrial automation systems and integration - Product data representation and exchange - Part 50: Integrated generic resources: Mathematical constructs.
49. ISO 10303-47:1998. Industrial automation systems and integration - Product data representation and exchange - Part 47: Integrated generic resources: Shape variation tolerances.
50. ISO 10303-519:2000. Industrial automation systems and integration - Product data representation and exchange - Part 519: Application interpreted construct: Geometric tolerances.
51. ISO/FDIS 10303-511:1997. Industrial automation systems and integration - Product data representation and exchange - Part 511: Application interpreted construct: Topologically bounded surface.
52. Balaguer, J.F., De Gennaro, S., 1996, VENUS: A virtual reality project at CERN, Computer Graphics 30,/4: 40-48.
53. Gomes de Sá, A., von Praun, S., 1998, Virtual Prototyping - A Fundamental Building Block of the Digital Mock-up Strategy, VR NEWS Virtual Reality Worldwide 7, pp15-19.
54. Burdea, G., Coiffet, P., 1993, Virtual Reality Technology. Jon Wiley & Sons, Inc, New York.
55. Kosslyn, S., 1994, Image and Brain: The resolution of the imagery debate, MIT Press, Cambridge, MA.
56. Youngblut, C., Johnson, R. E., Nash, S.H., Wienclaw, R.A., Will, C.A., 1995, Review or virtual environment interface technology, IDA Paper P-3186, Institute for Defense Analyses, Mar.
57. McKenna, M., Zeltzer, D, 1992, Three dimensional visual display systems for virtual environments, Presence 1, 4, pp 421-458.
58. Reinhart, G., Anton, O., Ehrenstrasser, M., Patron, C., 2000, Telepresent Microassembly, Proceedings of the 2nd PHANTOM Users Research Symposium, Zürich.
59. Reinhart, G., Cuiper, R., Roßgoderer, U., 1999, Concurrent Design of Assembly Systems Within a Shared Virtual Environment, Roller, D. (Ed.): Automotive Mechatronics and Design Engineering. Proceedings of 32nd ISATA, Wien, Croydon, pp. 173-180.
60. Reinhart, G., Roßgoderer, U., 1998, A System for Three-Dimensional Layout Planning of Automated and Manual Assembly Systems, P. Kopacek; D. Noe (Ed.): Preprints of the 1st IFAC-Workshop on Intelligent Assembly and Disassembly, Bled, pp 37-42.
61. Reinhart, G., Anton, O., Ehrenstraßer, M., Petzold, B., 2001, Telepresent Microassembly at a Glance, Färber, G., Hoogen, J. (Ed.): Workshop Proceedings: Advances in Interactive Multimodal Telepresence Systems, München. Hieronymus Buchreproduktions GmbH.
62. Anton, O., Cuiper, R., Ehrenstrasser, M., Patron, C., Reinhart, G., 2000, Telepresent Microassembly for Industrial Applications, Nair, S. (Ed.): Proceedings of the ASME Dynamic Systems. New York: ASME 2000. pp 1139-1145.
63. Anton, O., Ehrenstrasser, M., Patron, C., Petzold, B., 2001, Component-Oriented Framework for Telepresence Systems, Färber, G., Hoogen, J. (Ed.): Workshop Proceedings: Advances in Interactive Multimodal Telepresence Systems, München. Hieronymus Buchreproduktions GmbH.
64. Krause, F.-L., Tang, T., Ahle, U., 1999, Systementwicklungen für die integrierte virtuelle Produktentstehung, VDI-Bericht: 1497 Informationsverarbeitung in der Konstruktion '99 - Beschleunigung der Produktentwicklung durch EDM/PDM- und Feature-Technologie. Düsseldorf, VDI-Verlag 1999.
65. Bailey, J.M., 1995, Tele-Manufacturing: Rapid Prototyping on the Internet, IEEE Computer Graphics & Applications, 15(6), 20-26.
66. Luo, C. R. et al., 1999, Tele-Control of Rapid Prototyping Machine Via Internet for Automated Tele-Manufacturing, IEEE International Conference on Robotics and Automation, 3, 2203-8.
67. Jee, H., Lee, S., 2000, An RP Preprocessor Over the Internet, Proceedings of the 9th European Conference on Rapid Prototyping and Manufacturing, Athens, Greece, pp 65-77.
68. Bernard, A., Véron, M., 1999, Analysis and validation of 3D laser sensor scanning process, Annals of the CIRP, 48/1:111-114.
69. Kruth J.P., 1991, Material incress manufacturing by rapid prototyping techniques, Annals of the CIRP, 40/2: 603-614.
70. Wohlers T., 2002, Rapid Prototyping and Tooling: State of the Industry, 2002 Worldwide Progress Report.
71. Varady, T., Martin, R.R., Cox, J., 1997, Reverse Engineering of Geometric Models - an Introduction, Computer-Aided Design, 29/4: 255-268.
72. Teti R. and Buonadonna P. (2002). 3D Surface Profiling through Ultrasonic Reverse Engineering, 3rd Int. Sem. on Intelligent Computation in Manufacturing Engineering - ICME 2002, Ischia, Italy, 3-5, July: 387-394.
73. Kimmel, R. & Bruckstein, A.M., 1995, Global Shape from Shading, Computer Vision and Image Understanding, 62/3: 360-369.
74. Lorensen, W.E. & Cline, H.E., 1987, Marching Cubes: A High Resolution 3D Surface Construction Algorithm, ACM Computer Graphics, 21: 163-169.
75. Curless, B & Levoy, M., 1996, A Volumetric Method for Building Complex Models from Range Images, Siggraph, pp 303-312.
76. Guo, B., 1997, Surface Reconstruction from Points to Splines, Computer-Aided Design, 29/4: 269-277.
77. Eck, M. & Hoppe, H., 1996, Automatic Reconstruction of B-spine Surfaces of Arbitrary Topological Type, Siggraph, 1996: 325-334.
78. Barhak, J. & Fischer, A., 2001, Parameterization and Reconstruction from 3D Scattered Points Based on Neural Network and PDE Techniques, IEEE Transactions on Visualization & Computer Graphics, 7/1: 1-16.
79. Ma, W. & Kruth, J.P., 1995, Parameterization of Randomly Measured Points for Least Squares Fitting of B-Spline Curves and Squares, Computer-Aided Design, 27/9: 663-775.
80. Fischer, A. & Park, S. 1998, 3D Scanning and Level of Detail Modeling for Design and Manufacturing, Annals of the CIRP, 47/1: 91-94.
81. Fuh, J Y H, Loh, H T, Wong, Y S, Shi, D P, Mahesh, M and Chong, T S, 2002, A Web-based database system for RP machines, processes and materials selection, Software for Rapid prototyping, Chapter 2, Coordinator: Ian Gibson, ISBN 1-86058-360-1, pepublishing Ed., UK.
82. Bernard, A., Deglin, A., Knowledge-based environment for the generation of rapid product development processes, CIRP Design Seminar, Haïfa (Israel), mai 2000, published in International Journal of Manufacturing Science and Production, Vol. 3, no 2-4, 2000, pp 167-173, ISSN 0793-6648.
83. Bernard A., 1999, Computer-Aided Process planning for Rapid prototyping, SPIE symposium on Intelligent Systems and Advanced Manufacturing II, 19-22 septembre 1999, Vol. 3833, pp 63-68, Boston, (USA).
84. Deglin, A., Bernard, A., 2000, A knowledge-based environment for capitalisation and Computer-Aided Process Planning of rapid product development processes, CE (Concurrent Engineering) 2000, Lyon, ISBN 1-58716-033-1, pp 650-659.
85. Bernard, A., Deglin, A., 2000, An original approach for the capitalisation and the generation of rapid product development processes, 9th European Conference on RP & M, Grèce, juillet 2000, pp 205-220.
86. Haeseong J. Lee, 2002, Advanced Preprocessor functionality for layered manufacturing, Software for Rapid prototyping, Chapter 1, Coordinator: Ian Gibson, ISBN 1-86058-360-1, pepublishing Ed., UK.
87. Chandru, V., Manohar, S., Edmond Prakash, C., 1995, Voxel-Based Modeling for Layered Manufacturing, IEEE Computer Graphics and Applications, November, pp 42-47.
88. Jee, H., Sachs, E., 2000, A Visual Simulation Technique for 3D Printing, Advances in Engineering Software, 31 (2), 97-106.
89. Campbell, R.I., Jee, H., Lee, H., 2000, Visualization Tools for Design Support in SFF, Solid Freeform Fabrication Symposium, Univ. of Texas, Austin, pp. 437-440.
90. Blessing N., 2001, Computer Tomography Measurement in the Rapid Product Development Process Chain, 2nd RAPDASA conference, 14-15 November 2001, Stellenbosch, South Africa, ISBN 0-7972-0885-2 pp 229-241.
91. Blessing, L. T. M., 1994, A process-based approach to computer-supported engineering design, PhD Thesis, Univ. of Twente, Enschede, The Netherlands.
92. Blessing, L. T. M., 1996, Design process capture and support, 2nd Workshop on product structuring, Delft, The Netherlands.
93. Blessing, L. T. M., Ball, N. R., 1997, Implementation and initial evaluation of a process-based approach to design, 11th International conference on Engineering Design, Tempere, Finland.
94. Cantamessa, M., Duffy, A., Hein, L., Rimmer, D., 1999, Design co-ordination in new product development, 12th International Conference on Engineering Design, Munich.
95. Andreasen, M. M., Duffy, A. H. B., Bowen, J., Storm, T., 1996, The design co-ordination framework: key elements for effective product development, IST International Engineering Design Debate, Glasgow.
96. Duffy, A. H. B., 1995, Insuring competitive advantage with design coordination, 2nd international conference Design to Manufacture in Modern Industry, Bled, Slovania.
97. Girard, P., Eynard, B., Rimmer, D., Hein, L., 1999, Re-engineering of design processes in a design coordination environment, 12th International Conference on Engineering Design, Munich.
98. Alting, L., 2000, Manufacturing in the New Millennium, an academic response, Round table, CIRP internal documents and reports, pp 35-36.
99. Olling, G. J., 2000, Manufacturing in the New Millennium, an industrial response, Round table, CIRP internal documents and reports, pp 41-45.
100. Yoshimura, M., Takahashi, K., 2000, Collaborative design among different fields in mobile-agent environments, Advances in concurrent engineering, CE2000, Technomic Publishing Company Inc., ISBN 1-58716-033-1, pp 437-444.
101. Ouazzani, A., Bernard, A., Bocquet, J.C. 1997, Design process management system: SAGEP, International conference on Engineering design, ICED 97, Tampere.
102. Fährer, J., Meindl, M., 2000, Schichtweise zum Einsatz. Die Neue Fabrik, März.
103. Reinhart, G., 2000, Mit dem Kopf durch die Wende? Produktionstechnische Konzepte für reaktionsfähige Unternehmen, Reinhart, G.; Hoffmann, H.: Münchener Kolloquium 2000: ... nur der Wandel bleibt., München. Landsberg/Lech: moderne industrie.
104. Murr, O., Fährer, J., Breitinger, F., Pieverling, J., 2000, Rapid Manufacturing - Strategien und Methoden, Reinhart, G.: Rapid Manufacturing: Schnelle Herstellung von Klein- und Prototypenserien, Herbert Utz.
105. Fallbohmer P., Rodriguez C.A., Ozel T. and Altan T., 2000, HS machining of cast iron and alloy steels for die and mold manufacturing, Journal of Materials Processing Technology, 98/1: 104-115.
106. Reinhart, G. Meindl, M., Carnevale, M., Müller, A., 2001, Indirect Metal Laser Sintering (IMLS) in manufacturing LaserForm™ mold inserts for Pressure Die Casting, Meyer, R.; Kühnle, H.: uRapid 2001, Amsterdam. Magdeburg: Fraunhofer Allianz Rapid Prototyping 2001.
107. Levy, G., Schindler R., Nursanto W., 2001, Rapid product development applying SLS (Selective Laser Sintering) Rapid Tooling with interactive modeling and simulations, Seminar on Progress in innovative manufacturing engineering, PRIME 2001.
108. Levy, G., 2000, SLS-Layer Manufacturing a powerful complementary technology in the RPD cycle, International Journal for Manufacturing Science and Production, 3/2-4: 159-166.
109. Hunt, E., 2001, Towards Rapid Design and Manufacturing - An evolution of Rapid Prototyping, EURO RP' 2001, Keynote, Paris, AFPR editor.