Microfabrication of ceramic components by microstereolithography

Journal of Micromechanics and Microengineering

Volumn 14, Issue 2, 2004, Pages 197-203

  Bertsch, Arnaud ^a   Jiguet, Sébastien ^a   Renaud, Philippe ^a  

^a EPFL   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

HIGH RESOLUTION PROTOTYPES; MICROSTEREOLITHOGRAPHY; POLYMER MATRIX;

ALUMINA; BENDING STRENGTH; CRACKS; DEFORMATION; FILLERS; PHOTOSENSITIVITY; SINTERING;

CERAMIC MATERIALS;

EID: 1242310234     PISSN: 09601317     EISSN: None     Source Type: Journal    
DOI: 10.1088/0960-1317/14/2/005     Document Type: Article

References (44)

1. Bertsch A, Bernhard P and Renaud P 2001 Microstereolithography: concepts and applications 8th IEEE Int. Conf. on Emerging Technologies and Factory Automation (ETFA 2001) vol 2 pp 289-98
2. Varadan V K, Jiang X and Varadan V V 2001 Microstereolithography and Other Fabrication Techniques for 3D MEMS (New York: Wiley)
3. Ikuta K and Hirowatari K 1993 Real three-dimensional micro fabrication using stereo lithography and metal molding 6th IEEE Workshop on Micro Electro Mechanical Systems (MEMS'93) pp 42-7
4. Ikuta K 1995 Biomedical micro device fabricated by micro stereo lithography (IH process) 'Metabiotic Device '- a synthetic approach for life science 6th Int. Symp. on Micro Machine and Human Science (MHS'95) pp 71-6
5. Ikuta K, Ogota T, Tsubio M and Kojima S 1996 Development of mass productive micro stereo lithography 8th IEEE Workshop on Micro Electro Mechanical Systems (MEMS'96) pp 301-6
6. Takagi T and Nakajima N 1993 Photoforming applied to fine machining 4th Int. Symp. on Micro Machine and Human Science (MHS'93) pp 173-8
7. Takagi T and Nakajima N 1994 Architecture combination by micro photoforming process 7th IEEE Workshop on Micro Electro Mechanical Systems (MEMS'94) pp 211-6
8. Zissi S, Bertsch A, Jézéquel J Y, Corbel S, André J C and Lougnot D J 1996 Stereolithography and microtechniques Microsyst. Technol. 2 97-102
9. Zhang X, Jiang X and Sun C 1999 Micro-stereolithography of polymeric and ceramic microstructures Sensors Actuators A 77 149-56
10. Zhang X, Jiang X N and Sun C 1998 Micro-stereolithography for MEMS Micro Electro Mechanical Systems (MEMS) ASME 66 3-9
11. Bertsch A, Zissi S, Jézéquel J Y, Corbel S and André J C 1996 Manufacture of multilayers microparts by microstereophotolithography 3rd France-Japan Congress and 1st Europe - Asia Congress on Mechatronics vol 2 pp 492-5
12. Bertsch A, Jézéquel J Y and André J C 1997 Study of the spatial resolution of a new 3D microfabrication process: the microstereophotolithography using a dynamic mask-generator technique J. Photochem. Photobiol. A: Chem. 107 275-81
13. Bertsch A, Zissi S, Jézéquel J Y, Corbel S and André J C 1997 Microstereophotolithography using a liquid crystal display as dynamic mask-generator Microsyst. Technol. 3 42-7
14. Bohlmann H and Götzen R 2001 High aspect ratio components through RMPD 4th Int. Workshop on High Aspect Ratio Micro Structure Technology (HARMST'01) pp 49
15. Chatwin C R, Farsari M, Huang S, Heywood M I, Birch P M, Young R C D and Richardson J D 1998 UV microstereolithography system that uses spatial light modulator technology Appl. Opt. 37 7514-22
16. Chatwin C R, Farsari M, Huang S, Heywood M I, Young R C D, Birch P M, Clarte-Tournier F and Richardson J D 1999 Characterization of epoxy resins for microstereolithographic rapid prototyping Int. J. Adv. Manuf. Technol. 15 281-6
17. Farsari M, Huang S, Birch P M, Clarte-Tournier F, Young R C D, Budgett D, Bradfield C and Chatwin C R 1999 Microfabrication by use of a spatial light modulator in the ultraviolet: experimental results Opt. Lett. 24 549-50
18. Farsari M, Clarte-Tournier F, Huang S, Chatwin C R, Budgett D, Birch P M, Young R C D and Richardson J D 2000 A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask J. Mater. Process. Technol. 107 167-72
19. Monneret S, Loubère V and Corbel S 1999 Microstereolithography using a dynamic mask generator and a non-coherent visible light source SPIE Symposium on Design, Test and Microfabrication of MEMs/MOEMs 3680 553-61
20. Loubère V, Monneret S and Corbel S 1998 Microstereolithography using a mask-generator display 4th Japan-France Congress and 2nd Asia-Europe Congress on Mechatronics pp 160-3
21. Beluze L, Bertsch A and Renaud P 1999 Microstereolithography: a new process to build complex 3D objects SPIE Symposium on Design, Test and microfabrication of MEMs/MOEMs 3680 808-17
22. Bertsch A, Lorenz H and Renaud P 1999 3D microfabrication by combining microstereolithography and thick resist UV lithography Sensors Actuators A 73 14-23
23. Bertsch A, Bernhard P, Vogt C and Renaud P 2000 Rapid prototyping of small size objects Rapid Prototyp. J. 6 259-66
24. Bertsch A, Bernhard P, Vogt C and Renaud P 2001 Fine features by integral microstereolithography 4th Int. Workshop on High Aspect Ratio Micro Structure Technology (HARMST'01) pp 47-8
25. Maruo S and Ikuta K 1999 Movable microstructures made by two-photon three dimensional microfabrication Int. Symp. on Micromechatronics and Human Science (MHS'99) pp 173-8
26. Maruo S, Ikuta K and Hayato K 2001 Light-driven MEMS made by high-speed two-photon microstereolithography 14th IEEE International Conference on Micro Electro Mechanical Systems (MEMS2001) pp 594-7
27. Maruo S, Ikuta K and Korogi H 2001 Optical drive of constrained micromechanisms produced by two-photon microstereolithography with 200 nm resolution 4th International Workshop on High Aspect Ratio Micro Structure Technology (HARMST'01) pp 57-8
28. Maruo S and Kawata S 1998 Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication J. Microelectromech. Syst. 7 411-5
29. Maruo S, Nakamura O and Kawata S 1997 Three-dimensional microfabrication with two-photon-absorbed photopolymerization Opt. Lett. 22 132-4
30. Ikuta K, Maruo S and Kojima S 1998 New micro stereo lithography for freely movable 3D micro structure - Super IH process with submicron resolution 11th IEEE Workshop on Micro Electro Mechanical Systems (MEMS'98) pp 290-5
31. Kawata S, Sun H-B, Tanaka T and Takada K 2001 Finer features for functional microdevices Nature 412 697-8
32. Devaux F, Mosset A, Lantz E, Monneret S and Le Gall H 2001 Image upconversion from the visible to the UV domain: application to dynamic UV microstereolithography Appl. Opt. 40 4953-7
33. Monneret S, Le Gall H, Bade V, Devaux F, Mosset A and Lantz E 2002 Dynamic UV microstereolithography Eur. Phys. J. 20 213-8
34. Sun C and Zhang X 2002 The influences of the material properties on ceramic micro-stereolithography Sensors Actuators A 101 364-70
35. Monneret S, Provin C and Le Gall H 2001 Micro-scale rapid prototyping by stereolithography 8th IEEE Int. Conf. on Emerging Technologies and Factory Automation (ETFA 2001)vol 2 pp 299-304
36. Griffith M L and Halloran J W 1994 Ultraviolet curable ceramic suspensions for stereolithography of ceramics Manuf. Sci. Eng. 2 529-34
37. Griffith M L, Chu T-M, Wagner W and Halloran J W 1995 Ceramic stereolithography for investment casting and biomedical applications Solid Freeform Fabrication Conf. (SFF'95) pp 31-8
38. Hinczewski C, Corbel S and Chartier T 1998 Stereolithography for the fabrication of ceramic three-dimensional parts Rapid Prototyp. J. 4 104-11
39. Hinczewski C, Corbel S and Chartier T 1998 Ceramic suspensions suitable for Stereolithography J. Eur. Ceram. Soc. 18 583-90
40. Jang J H, Wang S, Pilgrim S M and Schulze W A 2000 Preparation and characterization of barium titanate suspensions for Stereolithography J. Am. Ceram. Soc. 83 1804-6
41. Greco A, Licciulli A and Maffezzoli A 2001 Stereolithography of ceramic suspensions J. Mater. Sci. 36 99-105
42. Doreau F, Chaput C and Chartier T 2000 Stereolithography for manufacturing ceramic parts Adv. Eng. Mater. 2 493-6
43. Allanic A-L and Schaeffer P 1999 Procédé de prototypage rapide permettant l'utilisation de matériaux pateux, et dispositif pour sa mise en oeuvre French patent no: FR 2 790 418-A1
44. Bertsch A, Jiguet S, Bernhard P and Renaud P 2003 Microstereolithography: a review Mater. Res. Soc. Symp. Proc. 758 LL..1-LL..12