Measurement of wall shear stress

Fluid Mechanics Measurements, Second Edition

Volumn , Issue , 2017, Pages 575-648

  Hanratty, Thomas J ^a   Campbell, Jay A ^b  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^b PFIZER INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

SHEAR FLOW;

DIRECT MEASUREMENT; ELECTROCHEMICAL TECHNIQUES; FLOWING FLUID; FLUID FLOWING; NORMAL STRESS; TANGENTIAL STRESS; THERMAL METHODS; WALL SHEAR STRESS;

SHEAR STRESS;

EID: 84896377419     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203755723     Document Type: Chapter

References (191)

1. T. E. Stanton, D. Marshall, and C. W. Bryant, On the Condition at the Boundary of a Fluid in Turbulent Motion, Proc. R. Soc. London Ser. A., vol. 97, pp. 413-434, 1920.
2. G. Kempf, Neue Ergebnisse der Widerstandforschung, Werft Reederei Hafen, vol. 11, pp. 234-249, 1929.
3. H. Ludwieg, Ein Gerat zur messung der Wandschubspannung turbulenter Reibungschichten, Ing. Arch., vol. 17, pp. 207-218,1940. (Instrument for Measuring the Wall Shearing Stress of Turbulent Boundary Layers, NACA TM 1284, 1950.)
4. J. H. Preston, The Determination of Turbulent Skin Friction by Means of Pitot Tubes, J. R. Aeronaut. Soc., vol. 58, pp. 109-121, 1953.
5. N. I. Konstantinov, Comparative Investigation of the Friction Stress on the Surface of a Body, Energomashinostroenie, vol. 176, pp. 201-213, 1955. (DSIR Translation RTS 1500, 1961.)
6. N. I. Konstantinov and G. L. Dragnysh, The Measurement of Friction Stress on a Surface, Energomashinostroenie, vol. 176, pp. 191-200, 1955. (DSIR Translation RTS 1499, 1960.)
7. L. P. Reiss and T. J. Hanratty, Measurement of Instantaneous Rates of Mass Transfer to a Small Sink on a Wall, AIChEJ., vol. 8, pp. 245-247, 1962.
8. L. P. Reiss and T. J. Hanratty, An Experimental Study of the Unsteady Nature of the Viscous Sublayer, AIChEJ., vol. 9, pp. 154-160, 1963.
9. G. S. Settles, Recent Skin-Friction Techniques for Compressible Flows, AINA/ASME 4th Fluid Mechanics, Plasma, and Lasers Conference, Atlanta, Georgia, 1986.
10. A. Fage and V. M. Falkner, On the Relation Between Heat Transfer and Surface Friction for Laminar Flow, Aeronaut. Res. Counc. London, R&M 1408, 1931.
11. H. Ludwieg and W. Tillmann, Investigation of the Wall Shearing Stress in Turbulent Boundary Layers, NACA TM 1285, 1950.
12. H. W. Liepmann and G. T. Skinner, Shearing-Stress Measurements by Use of a Heated Element, NACA TN 3269, 1954.
13. B. J. Bellhouse and D. L. Schultz, The Measurement of Skin Friction in Supersonic Flow by Means of Heated Thin Film Gauges, Aeronaut. Res. Counc. London, R&M, p. 940, 1965.
14. B. J. Bellhouse and D. L. Schultz, Determination of Mean and Dynamic Skin Friction, Separation and Transition in Low-Speed Flow with a Thin-Film Heated Element, J. Fluid Mech., vol. 24, pp. 379-400, 1966.
15. W. J. McCroskey and E. J. Durbin, Flow Angle and Shear Stress Measurements Using Heated Films and Wires, J. Basic Eng., vol. 94, pp. 46-52, 1972.
16. M. W. Rubesin, A. F. Okuno, G. G. Mateer, and A. Brosh, A Hot-Wire Surface Gage for Skin Friction and Separation Detection Measurements, NASA TM X-62, p. 465, 1975.
17. V. A. Sandborn, Surface Shear Stress Fluctuations in Turbulent Boundary Layers, Second Symp. on Turbulent Shear Flows, London, 1979.
18. V. A. Sandborn, Evaluation of the Time Dependent Surface Shear Stress in Turbulent Flows, ASME Preprint 79-WA/FE-17, 1979.
19. J. E. Mitchell and T. J. Hanratty, A Study of Turbulence at a Wall Using an Electrochemical WallStress Meter, J. Fluid Mech., vol. 26, pp. 199-221, 1966.
20. G. Fortuna and T. J. Hanratty, Frequency Response of the Boundary Layer on Wall Transfer Probes, Int. J. Heat Mass Transfer, vol. 14, pp. 1499-1507, 1971.
21. H. G. Dimopoulos and T. J. Hanratty, Velocity Gradients at the Wall for Flow Around a Cylinder for Reynolds Numbers Between 60 and 360, J. Fluid Mech., vol. 33, pp. 303-319, 1968.
22. s, J. Fluid Mech., vol. 35, pp. 353-368, 1969.
23. C. Tournier and B. Py, The Behavior of Naturally Oscillating Three-Dimensional Flow Around a Cylinder, J. Fluid Mech., vol. 85, p. 161, 1978.
24. M. LeBouche and M. Martin, Convection Forcee Autour du Cylindre: Sensibilitie aux Pulsations de l’Ecoulement Externe, Int. J. Heat Mass Transfer, vol. 18, pp. 1161-1175, 1975.
25. K. K. Sirkar and T. J. Hanratty, Limiting Behavior of the Transverse Turbulent Velocity Fluctuations Close to a Wall, Ind. Eng. Chem. Fundam., vol. 8, pp. 189-192, 1969.
26. K. K. Sirkar and T. J. Hanratty, The Limiting Behavior of the Turbulent Transverse Velocity Component Close to a Wall, J. Fluid Mech., vol. 44, pp. 605-614, 1970.
27. B. Py and J. Gosse, Sur la Realisation d’une Sonde en Paroi Sensible a la Vitesse et a la Direction de l’Ecoulement, C. R. Acad. Set, vol. 269A, pp. 401-403, 1969.
28. B. Py, Etude Tridimensionnelle de la Sous-Couche Visqueuse dans une Veine Rectangulaire par des Mesures de Transfert de Matiere en Paroi, Int. J. Heat Mass Transfer, vol. 15, pp. 129-144, 1973.
29. B. Py, Sur l’Interet de la Reduction de l’lode dans l’Etude Polarographique des Ecoulements, C. R. Acad. Sci., vol. 270A, pp. 202-205, 1970.
30. Z. X. Mao and T. J. Hanratty, Analysis of Wall-Shear Stress Probes in Large Amplitude Unsteady Flows, Int. J. Heat Mass Transfer, vol. 34, pp. 281-290, 1991a.
31. Z. X. Mao and T. J. Hanratty, Applications of an Inverse Mass-Transfer Method to the Measurement of Turbulent Fluctuations in the Velocity Gradient at the Wall, Exp. Fluids, vol. 11, pp. 65-73, 1991b.
32. Z. X. Mao and T. J. Hanratty, Measurement of Wall Shear Rate in Large Amplitude Unsteady Reversing Flows, Exp. Fluids, vol. 12, pp. 342-350, 1992.
33. S. Dhawan, Direct Measurements of Skin Friction, NACA TN 2567, 1953.
34. K. G. Winter, An Outline of the Techniques Available for the Measurement of Skin Friction, Progr. Aerospace Sci, vol. 18, pp. 1-57, 1977.
35. M. Acharya, Development of a Floating Element for Measurement of Surface Shear Stress, AIAA J., vol. 24, p. 410, 1985.
36. G. Kempf, Weitere Reibungsergebnisse en ebenen glatten und rauhen Flachen, Hydromech. Probl. Schijfsantreibs, vol. 1, pp. 74-82, 1932.
37. F. Schultz-Grunow, Neues Reibungswiderstandsgestz für glatte Platten, Luftfahrforschung, vol. 17, pp. 239-246, 1940. (New Friction Law for Smooth Plates, NASA TM 986, 1941.)
38. D. W. Smith and J. H. Walker, Skin Friction Measurements in Incompressible Flows, NASA TR R 26, 1959.
39. K. G. Winter and L. Gaudet, Turbulent Boundary-Layer Studies at High Reynolds Numbers Between 0.2 and 2.9, Aeronaut. Res. Counc. London, R&M 3712, 1973.
40. D. E. Coles, Measurement of Turbulent Friction on a Smooth Flat Plate in Supersonic Flow, J. Aeronaut. Sci, vol. 21, pp. 433-448, 1954.
41. L D. J. Garringer and E. J. Saltzman, Flight Demonstrations of a Skin-Friction Gage to a Local Mach Number of 4.9, NASA TN D-3820, 1967.
42. D. G. Mabey and L. Gaudet, Performance of Small Skin Friction Balances at Supersonic Speeds, J. Aircraft., vol. 12, pp. 819-825, 1975.
43. J. M. Allen, Systematic Study of Error Sources in Supersonic Skin-Friction Balances, NASA TN D-8291, 1976.
44. J. M. Allen, Experimental Study of Error Sources in Skin Friction Balance Measurements, J. Fluids Eng., pp. 197-204, 1977.
45. J. M. Allen, Improved Sensing Elements for Skin-Friction Balance Measurements, AIAA J., vol. 18, pp. 1342-1345, 1980.
46. D. Frei, Direkte Wandschubspannungsmessung in der Turbulenten Grenzschicht mit Positiven Druckgradient, Diss. ETH 6392, 1979.
47. D. Frei and H. Thomann, Direct Measurements of Skin Friction in a Turbulent Boundary Layer with a Strong Adverse Pressure Gradient, J. Fluid Meek, vol. 101, pp. 79-95, 1980.
48. S. W. Petri, Development of a Floating Element Wall Shear Stress Transducer, Report 87144-1, Acoustics and Vibration Laboratory, Massachusetts Inst, of Technology, Cambridge, 1984.
49. M. A. Schmidt, R. T. Howe, S. D. Senturia, and J. H. Hanitonidis, Design and Calibration of a Microfabricated Floating-Element Shear Stress Sensor, IEE Trans. Electron. Devices, vol. 35, pp. 750-757, 1988.
50. V. C. Patel, Calibration of the Preston Tube and Limitation on Its Use in Pressure Gradients, J. Fluid Meek, vol. 23, pp. 185-208, 1965.
51. I. Rechenberg, Messung der turbulenten Wandschubspannung, Z. Flugwiss, vol. 11, pp. 429-438, 1963.
52. A. D. Young and J. N. Mass, The Behavior of a Pitot Tube in a Transverse Total-Pressure Gradient, Aeronaut. Res. Counc. London, R&M 1770, 1936.
53. K. C. Brown and P. N. Joubert, Measurement of Friction in Turbulent Boundary Layers, J. Fluid Meek, vol. 35, pp. 737-757, 1967.
54. M. R. Head and I. Rechenberg, The Preston Tube as a Means of Measuring Skin Friction, J. Fluid Meek, vol. 14, pp. 1-17, 1962.
55. M. R. Head and V. V. Ram, Simplified Presentation of Preston Tube Calibration, Aeronaut. Q., vol. 22, pp. 295-300, 1971.
56. W. E. Holmes and R. E. Luxton, Measurement of Turbulent Skin Friction by a Preston Tube in the Presence of Heat Transfer, J. Meck Eng. Sci., vol. 9, pp. 159-166, 1967.
57. E. Y. Hsu, The Measurement of Local Turbulent Skin Friction by Means of Surface Pitot Tubes, Report 957, NS 715-102, Navy Department, David W. Taylor Model Basin, Washington, D. C., 1955.
58. Nitsche, N., Wändschubspannungsmessung mit Prestonrohren in Grenzschiehtströmungen mit Zusätzlichen Einflussparametern, Z. Flugwiss. Wehraumforsch, vol. 4, p. 3, 1980.
59. E. F. Reif, R. C. Pankhurst, and W. S. Walker, The Use of Pitot Tubes to Measure Skin Friction on a Flat Plate, Report F.M. 2121, Fluid Motion Sub-Committee, Aeronautical Research Council, London, 1954.
60. J. M. Allen, Evaluation of Compressible Flow Preston Tube Calibration, NASA TN D-7190, 1973.
61. P. Bradshaw and D. Unsworth, A Note on Preston Tube Calibrations in Compressible Flow, AIAA J, vol. 12, no. 9, pp. 1293-1294, 1974.
62. J. H. Hool, Measurement of Skin Friction Using Surface Tubes, Aircraft Eng., vol. 28, p. 52, 1956.
63. B. A. Bradshaw and M. A. Gregory, The Determination of Local Turbulent Skin Friction from Observation in the Viscous Sub-layer, Aeronaut. Res. Counc. London, R&M 3202, 1961.
64. G. L. Brown, Theory and Application of Heated Films for Skin Friction Measurement, Proc. of 1967 Heat Transfer and Fluid Mech. Inst., pp. 361-381, Stanford University Press, 1967.
65. L. F. East, Measurement of Skin Friction at Low Subsonic Speeds by the Razor-Blade Technique, Aeronaut. Res. Counc. London, R&M 3525, 1966.
66. G. I. Taylor, Measurement with a Half-Pitot Tube, Proc. R. Soc. London Ser. A, vol. 166, p. 476, 1938.
67. G. E. Gadd, W. E. Cope, and J. L. Attridge, Heat Transfer and Skin-Friction Measurements at a Mach Number of 2.44 for a Turbulent Boundary Layer on a Flat Surface and in Regions of Separated Flow, Aeronaut. Res. Counc. London, R&M 3148, 1959.
68. G. E. Gadd, A Note on the Theory of the Stanton Tube, Aeronaut. Res. Counc. London, R&M3147, 1958.
69. J. H. Haritonidis, The Measurement of Wall Shear Stress, in M. Gad-el-Hak, ed., Advances in Fluid Mechanics Measurements, Lecture Notes in Engineering, pp. 229-261, Springer-Verlag, New York, 1989.
70. S. S. Abarnel, R. J. Häkkinen, and L. Trilling, Use of a Stanton Tube for Skin-Friction Measurements, NASA Memo. 2-17-59W, Washington, D.C., 1959.
71. A. Thom, The Flow of the Mouth of a Stanton Pitot, Aeronaut. Res. Counc. London, R&M2984, 1956.
72. M. C. Good and P. N. Joubert, The Form Drag of Two-Dimensional Bluff-Plates Immersed in Turbulent Boundary Layers, J. Fluid Meek, vol. 31, pp. 547-582, 1968.
73. 6, J. Fluid Meek, vol. 34, pp. 625-639, 1968.
74. E. Achenbach, Experiments on Flow Past Spheres at Very High Reynolds Numbers, J. Fluid Meek, vol. 54, pp. 565-575, 1972.
75. J. B. Vagt and H. Fernholz, Use of Surface Fences to Measure Wall Shear Stress in ThreeDimensional Boundary Layers, Aeronaut. Q., vol. 2, pp. 87-91, 1973.
76. H. Higuchi and M. W. Rubesin, An Experimental and Computational Investigation of the Transport of Reynolds Stress in an Axisymmetric Swirling Boundary Layer, AIAA 19th Aerospace Science Meeting, St. Louis, January 1981.
77. D. A. Spence and G. L. Brown, Heat Transfer to a Quadratic Shear Profile, J. Fluid Meek, vol. 33, pp. 753-773, 1968.
78. J. S. Son, Limiting Relation for the Eddy Diffusivity Close to a Wall, M.S. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1965.
79. J. S. Son and T. J. Hanratty, Limiting Relation for the Eddy Diffusivity Close to a Wall, AIChE J, vol. 13, pp. 689-696, 1967.
80. D. A. Shaw and T. J. Hanratty, Turbulent Mass Transfer Rates to a Wall for Large Schmidt Numbers, AIChE J., vol. 23, pp. 28-37, 1977.
81. S. C. Ling, Heat Transfer from a Small Isothermal Spanwise Strip on an Insulated Boundary, J. Heat Transfer, vol. C85, pp. 230-236, 1963.
82. K. R. Jolis, Flow Patterns in a Packed Bed, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1966.
83. M. LeBouche, Transfert de Matière en Regime de Couche Limite Bidimensionnelle et a Nombre de Schmidt Grand, C R. Acad. Sci., vol. 270A, pp. 1757-1760, 1970.
84. M. LeBouche, Sur la Mesure Polarographique de Gradient Parietal de Vitesse Dams les Zones d’Arret Amont ou de Décollement du Cylinder, C. R. Acad. Sci., vol. 276A, pp. 1245-1248, 1973.
85. Z. X. Mao and T. J. Hanratty, The Use of Scalar Transport Probes to Measure Wall Shear Stress in a Flow with Imposed Oscillations, Exp. Fluids, vol. 3, pp. 129-135, 1985.
86. C. Ambari, C. Deslouis, and B. Tribollet, Frequency Response of the Mass Transfer Rate in a Modulated Flow at Electrochemical Probes, Int. J. Heat Mass Transfer, vol. 29, pp. 35-45, 1986.
87. V. Ye. Nakoryakov, A. P. Burdukov, O. N. Kashinsky, and P. I. Geshev, Electrodifiusion Method of Investigation into the Local Structure of Turbulent Flows, Thermosphysics Inst., Novosibirsk, 1986.
88. Yu. E. Bogolyubov, P. I. Geslev, V. E. Nakoryakov, and I. A. Ogorodnikov, Theory of the Electrodifiusion Method of Measuring the Spectral Characteristics of Turbulent Flows, Prikl. Mekh. Teckln. Fiz., vol. 13, no. 14, 1972.
89. J. Y. Dumaine, Etude Numérique de la Réponse en Fréquence des Sordes Electrochimiques, Lett. Heat Mass Transfer, vol. 8, p. 293, 1981.
90. M. A. Vorotyntsev, S. A. Martem’Yanov, and B. M. Grafov, Temporal Correlation of Current Pulsations at One or Several Electrodes: A Technique to Study Hydrodynamic Fluctuation Characteristics of a Turbulent Flow, J. Electroanal. Chem., vol. 179, p. 1, 1984.
91. T. J. Pedley, Hot Film in Reversing Flow, J. Fluid Meck, vol. 78, pp. 513-584, 1976.
92. P. Kaiping, Unsteady Forced Convective Heat Transfer from a Hot Film in Non-reversing and Reversing Flow, Int. J. Heat Mass Transfer, vol. 24, pp. 545-557, 1983.
93. T. J. Hanratty, L. G. Cliorn, and D. T. Hatziavramidis, Turbulent Fluctuations in the Viscous Wall Region for Newtonian and Drag Reducing Fluids, Phys. Fluids Suppl, pp. S112-S119, 1977.
94. Z. X. Mao and T. J. Hanratty, Studies of the Wall Shear Stress in a Turbulent Pulsating Pipe Flow, J. Fluid Meek, vol. 177, pp. 545-564, 1986.
95. B. Py, Les Propriétés Generales des Transducteurs Electrochimiques Scindes, Euromech. 90 Proc., 1977.
96. C. G. Phillips, Heat and Mass Transfer from a Film into Steady Shear Flow, Q. J. Meek Appl. Math., vol. 43, pp. 135-159, 1990.
97. H. A. Stone, Heat/Mass Transfer from Surface Films to Shear Flows at Arbitrary Péclet Numbers, Phys Fluids A, vol. 1, pp. 1112-1122, 1989.
98. K. K. Sirkar, Turbulence in the Immediate Vicinity of a Wall and Fully Developed Mass Transfer at High Schmidt Numbers, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1969.
99. J. E. Mitchell, Investigation of Wall Turbulence Using a Diffusion-Controlled Electrode, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1965.
100. A. J. Karabelas and T. J. Hanratty, Determination of the Direction of Surface Velocity Gradients in Three-Dimensional Boundary Layers, J. Fluid Mech., vol. 34, pp. 159-162, 1968.
101. C. Tournier and B. Py, Analyse et Reconstitution Spatiotemporelle de la Composante Circon-ferentille de Vitesse Instantanée a Proximité Immediate de la Paroi d’ur Cylindre, C. R. Acad. Sci, vol. 276A, pp. 403-406, 1973.
102. Th. Menzel, V. Sobolik, O. Wein, and U. Onken, Segmentierte Elektrodiffusionssonden zur Messung des Wandschergeschwindigkeitsvekton, Chem. Ing. Tech., vol. 59, pp. 492-493, 1987.
103. O. Wein and N. A. Pokryvaylo, Method of Manufacture of Segmented Probe with Circular CrossSection, Czechoslovak Patent AO 262 823, 1989.
104. P. Duhamel and B. Py, Caractère Intermittent delà Sous-Couche Visqueuse, AAAE 9e Colloque D’Aérodynamique Appliquée, Paris, 1972.
105. L. Labraga, C. Tournier, and P. Florent, Experimental Study of the Frequency Response of Electrochemical Split Probes to Transerval Velocity Fluctuations, Exp. Fluids, vol. 11, pp. 325-332, 1991.
106. M. W. Rubesin, A. F. Okono, G. G. Mateer, and A. Brosh, A Hot-Wire Surface Gauge for Skin Friction and Separation Detection Measurements, NASA TM X-62465, 1975.
107. P. H. Alfredsson, A. V. Johansson, J. H. Haritonidis, and E. Eckelmann, The Fluctuating Wall-Shear Stress and the Velocity Field in Viscous Sublayer, Phys. Fluids, vol. 31, pp. 1026-1033, 1988.
108. B. J. Bellhouse and C. G. Rasmussen, Low Frequency Characteristics of Hot-Film Anemometers, DISA Inf. Bull., no. 6, pp. 3-11, 1968.
109. D. E. Beasley and R. S. Fegliola, A Generalized Analysis of a Local Heat Flux Probe, J. Phys. E., vol. 21, pp. 316-322, 1979.
110. K. D. Cole and J. V. Beck, Conjugated Heat Transfer from a Strip Heater with the Unsteady Surface Element Method, AI A A J. Thermophys. Heat Transfer, vol. 1, pp. 348-354, 1987.
111. K. D. Cole and J. V. Beck, Conjugated Heat Transfer from a Hot-Film Probe for Transient Air Flow, J. Heat Transfer, vol. 110, pp. 290-296, 1988.
112. P. W. Liang and K. D. Cole, Conjugated Heat Transfer from a Rectangular Hot Film with the Unsteady Surface Element Method, AI A A J. Thermophys. Heat Transfer, vol. 6, pp. 349-355, 1992.
113. K. D. Cole, Shear Stress from Hot-Film Sensors in Unsteady Gas Flow Numerical Experiments, Heat Transfer in Unsteady Flows, HTD, vol. 158, National Heat Transfer Conference, Minneapolis, Minn., July 1991.
114. A. N. Menendez and B. R. Ramaprian, The Use of Flush-Mounted Hot-Film Gages to Measure Skin Friction in Unsteady Boundary Layers, J. Fluid Mech., vol. 161, pp. 139-159, 1954.
115. F. K. Owen and B. J. Bellhouse, Skin Friction Measurements at Supersonic Speeds, AIAA J, vol. 8, pp. 1358-1360, 1970.
116. N. S. Diaconis, The Calculation of Wall Shearing Stresses from Heat-Transfer Measurements in Compressible Flow, J. Aeronaut. Sci, vol. 21, pp. 201-202 (errata, p. 499), 1954.
117. J. S. Newman, Electrochemical Systems, pp. 1-25, Prentice-Hall, Englewood Cliffs, N.J., 1973.
118. T. J. Hanratty, Study of Turbulence Close to a Solid Wall, Phys. Fluids Suppl., pp. S126-S133, 1967.
119. W. E. Ranz, Electrolytic Methods for Measuring Water Velocities, AIChE J., vol. 4, pp. 338-342, 1958.
120. I. M. Kolthoff and J. J. Lingane, Polarography, Interscience, New York, 1952.
121. C. S. Lin, E. B. Denton, H. S. Gaskill, and G. L. Putnam, Diffusion-Controlled Electrode Reactions, Ind. Eng. Chem., vol. 43, pp. 2136-2143, 1951.
122. L. P. Reiss, Turbulent Mass Transfer to Small Sections of a Pipe Wall, M.S. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1960.
123. T. Mizushina, The Electrochemical Method in Transport Phenomena, Adv. Heat Transfer, vol. 1, pp. 87-159, 1971.
124. A. M. Sutey and J. G. Knudsen, Mass Transfer at the Solid-Liquid Interface for Climbing Film Flow in an Annular Duct, AIChE J., vol. 15, p. 719, 1969.
125. M. Eisenberg, C. W. Tobias, and C. R. Wilke, Mass Transfer at Rotating Cylinders, Chem. Eng. Prog. Symp. Ser., vol. 51, no. 16, pp. 1-16, 1955.
126. E. A. Vallis, M. A. Patrick, and A. A. Wragg, Radial Distribution of Wall Fluxes in the Wall Jet Region of a Flat Plate Held Normal to an Axisymmetric, Turbulent, Impinging Jet, Euromech. 90 Proc., Session IIIc, pp. 1-14, 1977.
127. J. D. Jenkins and B. Gay, Experience in the Use of the Ferri-Ferrocyanide Redox Couple for the Determination of Transfer Coefficients in Models in Shell and Tube Heat Exchangers, Euromech. 90 Proc., Session Ilia, pp. 1-20, 1977.
128. D. A. Shaw, Mechanism of Turbulent Mass Transfer to a Pipe Wall at High Schmidt Number, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1976.
129. J. G. A. Hogenes, Identification of the Dominant Flow Structure in the Viscous Wall Region of a Turbulent Flow, Ph.D. thesis, Mechanical Engineering Department, University of Illinois, Urbana, 1979.
130. L. G. Chorn, An Experimental Study of Near-Wall Turbulence Properties in Highly Drag Reduced Pipe Flows of Pseudoplastic Polymer Solutions, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1978.
131. I. M. Kolthoff and N. H. Furman, Volumetric Analysis, vol. 1, p. 231, Wiley, New York, 1928.
132. A. M. Sutey and J. C. Knudsen, Effect of Dissolved Oxygen on the Redox Method for the Measurement of Mass-Transfer Coefficients, Ind. Eng. Fundam., vol. 6, pp. 133-139, 1967.
133. V. E. Nakoryakov, O. N. Kashinsky, A. V. Petukhnov, and R. S. Gorelik, Study of Local Hydrodynamic Characteristics of Upward Slug Flow, Exp. Fluids, vol. 7, pp. 560-566, 1989.
134. V. E. Nakoryakov, O. N. Kashinsky, A. P. Burdukov, and V. P. Odnoral, Local Characteristics of Upward Gas-Liquid Flows, Int. J. Multiphase Flow, vol. 7, pp. 63-81, 1981.
135. V. E. Nakoryakov, O. N. Kashinsky, and B. K. Kozmenko, Experimental Study of Gas-Liquid Slug Flow in a Small-Diameter Vertical Pipe, Int. J. Multiphase Flow, vol. 12, pp. 337-355, 1986.
136. G. A. McConaghy, The Effect of Drag Reducing Polymers on Turbulent Mass Transfer, Ph.D. thesis, University of Illinois, Urbana, 1974.
137. G. Fortuna, Effect of Drag-Reducing Polymers on Flow near a Wall, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1971.
138. R. E. Hicks and N. Pagotto, CSIR Rep. CENG M-024, Pretoria, South Africa, 1974.
139. S. Robin, Etude de la Turbulence Pariétale par la Méthode Electrochimique, Thèse de Doctorat de l’Université Paris 6, 1987.
140. O. Gil, Réponse en Fréquence de Microsondes Electrochimiques, Thèse de Doctorat de l’Université Paris 6, 1990.
141. L. P. Reiss, Investigation of Turbulence near a Pipe Wall Using a Diffusion Controlled Electrolytic Reaction on a Circular Electrode, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1962.
142. D. T. Chin, An Experimental Study of Mass Transfer on a Rotating Spherical Electrode, J. Elec-trochem. Soc., vol. 118, p. 1764, 1971.
143. J. C. Bazan and A. J. Arvia, The Diffusion of Ferro- and Ferricyanide Ions in Aqueous Solutions of Sodium Hydroxide, Electrochim. Acta, vol. 10, p. 1025, 1965.
144. J. D. Newson and A. C. Riddiford, Limiting Currents for the Reduction of the Tri-iodide Ion at a Rotating Platinum Disk Cathode, J. Electrochem. Soc., vol. 108, p. 695, 1961.
145. J. S. Anderson and K. Saddington, The Use of Radioactive Isotopes in the Study of the Diffusion of Ions in Solution, J. Chem. Soc., pp. S381-S386, 1949.
146. M. Eisenberg, C. W. Tobias, and C. R. Wilke, Selected Physical Properties of Ternary Electrolytes Employed in Ionic Mass Transfer Studies, J. Electrochem. Soc., vol. 103, pp. 413-416, 1956.
147. D. A. Shaw, Measurement of Frequency Spectra of Turbulent Mass Transfer Fluctuations at a Pipe Wall, M.S. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1973.
148. G. Nickless (ed.), Inorganic Sulfur Chemistry, pp. 200-239, Elsevier, New York, 1968.
149. J. Vulterin and J. Zyka, Investigation of Some Hydrazine Derivatives as Reductimetric Titrants, Talanta, vol. 10, pp. 891-898, 1963.
150. H. V. Malmstadt, C. G. Enke, and S. F. Crouch, Electronic Measurements for Scientists, pp. 94-97, Benjamin, Reading, Mass., 1974.
151. T. J. Hanratty, The Use of Electrochemical Techniques to Study Flow Fields and Mass Transfer Rates, in Z. Zaric (ed.), Heat and Mass Transfer in Flows with Separated Regions, pp. 139-159, Pergamon, New York, 1972.
152. L. D. Eckelman, The Structure of Wall Turbulence and Its Relation to Eddy Transport, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1971.
153. V. A. Sandborn, Resistance Temperature Transducers, pp. 361-365, Metrology Press, Fort Collins, Colo., 1972.
154. DISA Electronics, DISA Probe Manual, Denmark, 1976.
155. M. W. Rubesin, A. F. Okuno, L. L. Levy, J. B. McDevitt, and H. L. Seegmiller, An Experimental and Computational Investigation of the Flow Field About a Transonic Airfoil in Supercritical Flow with Turbulent Boundary Layer Separation, NASA TM X-73, p. 157, 1976.
156. R. F. Blackwelder and H. Eckelmann, Influence of the Convection Velocity on the Calibration of Heated Surface Elements, Euromech. 90 Proc., Session I.a.l, pp. 1-10, 1977.
157. D. H. Pessoni, An Experimental Investigation into the Effects of Wall Heat Flux on the Turbulence Structure of Developing Boundary Layers at Moderately High Reynolds Numbers, Ph.D. thesis, Mechanical and Industrial Engineering Department, University of Illinois, Urbana, 1974.
158. D. S. Simons, R. M. Li, and F. D. Schall, Spatial and Temporal Distribution of Boundary Layer Shear Stress in Open Channel Flows, NSF Final Rep., Civil Engineering Department, Colorado State University, Fort Collins, 1979.
159. J. E. Coney and D. A. Simmers, The Determination of Shear Stress in Fully Developed Laminar Axial Flow and Taylor Vortex Flow, Using a Flush-Mounted Hot Film Probe, DISA Inf. Bull., no. 24, pp. 9-14, 1979.
160. K. F. Wylie and C. V. Alonso, Some Stochastic Properties of Turbulent Tractive Forces in Open Channel Flow, Proc. of the Fifth Biennial Symp. on Turbulence, p. 181, Rolla, Missouri, 1979.
161. G. R. Foster, Hydraulics of Flow in a Rill, Ph.D. thesis, Purdue University, 1977.
162. O. Christensen, New Trends in Hot-Film Probe Manufacturing, DISA Inf. Bull., no. 9, pp. 3036, 1970.
163. K. E. W, Coated Hot Film Probes for Measurement in Liquids, DISA Inf. Bull., no. 3, p. 28, 1966.
164. M. Miya, Properties of Roll Waves, Ph.D. thesis, Chemical Engineering Department, University of Illinois, Urbana, 1970.
165. Thermo Systems, Inc., TSI Operating Manual for Model 1050 and I050A Anemometer Modules, pp. 2-8, St. Paul, Minn., 1973.
166. H. Higuchi and D. J. Peake, Bi-Directional Buried-Wire Skin-Friction Gage, NASA TM 78531, 1978.
167. A. Bertelrud, Measurement of Shear Stress in a Three-Dimensional Boundary Layer by Means of Heated Films, Euromech. 90 Proc., Session I.b.2, pp. 1-14, 1977.
168. H. P. Kreplin and H. U. Meier, Application of Heated Element Techniques for the Measurement of the Wall Shear Stress in Three-Dimensional Boundary Layers, Euromech. 90 Proc., Session I.B.3, pp. 1-21, 1977.
169. H. Schlichting, Boundary Layer Theory, 6th ed., pp. 154-162, McGraw-Hill, New York, 1960.
170. K. Hiemenz, Die Grenzschicht en einem in den Gleichförmigen Flussiqkeitsstrom Eingetauchten Geraden Kreiszylinder, Dingl. Polytechn. T, vol. 326, pp. 321-324, 1911.
171. M. A. Niederschulte, R. J. Adrian, and T. J. Hanratty, Measurements of Turbulent Flow in a Channel at a Low Reynolds Number, Exp. Fluids, vol. 9, pp. 222-230, 1990.
172. F. H. Clauser, Turbulent Boundary Layers in Adverse Pressure Gradients, J. Aeronaut. Sei., vol. 21, pp. 91-108, 1954.
173. L. S. Cohen and T. J. Hanratty, Effect of Waves at a Gas-Liquid Interface on a Turbulent Air Flow, J. Fluid Mech., vol. 31, pp. 467-479, 1968.
174. J. L. Hudson, Effect of Wavy Walls on Turbulence, Ph.D. thesis, University of Illinois, Urbana, 1993.
175. D. M. McEligot, Measurement of Wall Shear Stress in Favorable Pressure Gradients, Lecture Notes in Physics, vol. 235, pp. 292-303, 1985.
176. L. H. Tanner and L. G. Blows, A Study of the Motion of Oil Films in Surfaces in Air Flow, With Applications to the Measurement of Skin-Friction, J. Phys. E Sci. Instrum., vol. 9, pp. 194-202, 1976.
177. L. H. Tanner, The Application of Fizeau Interferometry of Oil Films to Study of Surface Flow Phenomena, Opt. Lasers Eng., vol. 2, pp. 105-118, 1981.
178. D. J. Monson and H. Higuchi, Skin-Friction Measurements by a Plural-Laser-Beam Interferometer Technique, AIAA J., vol. 19, pp. 739-744, 1981.
179. D. J. Monson, A Nonintrusive Laser Interferometer Method for Measurement of Skin Friction, Exp. Fluids, vol. 1, pp. 15-22, 1983.
180. D. J. Monson, A Laser Interferometer for Measuring Skin Friction in Three-Dimensional Flows, AIAA J., vol. 22, pp. 557-559, 1984.
181. R. V. Westphal, J. Eaton, and K. Johnston, A New Probe for Measurement of Velocity and Wall Shear Stress in Unsteady, Reversing Flow, Report IL-16, Heat Transfer and Turbulence Mechanics Group Thermosciences Division of Mechanical Eng., Stanford Univ., Stanford, Calif., April 1980. (Presented at the ASME Winter Annual Meeting, Chicago, 111., 1980.)
182. R. V. Westphal, W. D. Bachalo, and M. H. Houser, Improved Skin-Friction Interferometer, NASA TM 88216, 1986.
183. J. D. Murphy and R. V. Westphal, The Laser Interferometer Skin-Friction Meter: A Numerical and Experimental Study, J. Phys. E Sci. Instrum., vol. 19, pp. 744-751, 1986.
184. P. R. Bandyopadhyay and L. M. Weinstein, A Reflection-Type Oil-Film Skin Friction Meter, Exp. Fluids, vol. 11, PP. 281-292, 1991.
185. A. A. Naqwi and W. C. Reynolds, Measurement of Turbulent Wall Velocity Gradients Using Cylindrical Waves of Laser Light, Exp. Fluids, vol. 10, pp. 257-266, 1991.
186. J. K. Eaton, R. V. Westphal, and J. Johnston, Two New Instruments for Flow Direction and Skin Friction Measurements in Separated Flows, ISA Trans, vol. 21, p. 69, 1981.
187. L. J. S. Bradbury and I. P. Castro, A Pulsed-Wire Technique for Velocity Measurements in Highly Turbulent Flow, J. Fluid Mech., vol. 49, pp. 657-691, 1971.
188. I. P. Castro and M. Dianat, Surface Flow Patterns on Rectangular Bodies in Thick Boundary Layers, J. Wind Eng. Ind. Aeronaut., vol. 11, p. 107, 1983.
189. I. P. Castro and A. Hague, The Structure of a Turbulent Shear Layer Bounding a Separation Region, J. Fluid Mech., vol. 179, pp. 439-468, 1987.
190. M. Dianat and I. P. Castro, Turbulence in a Separated Boundary Layer, J. Fluid Mech., vol. 226, pp. 91-123, 1991.
191. I. P. Castro, M. Dianat, and L. J. S. Bradbury, The Measurement of Fluctuating Skin Friction with a Pulsed Wall Probe, in F. Durst, B. E. Launder, F. W. Schmidt, and J. H. Whitelaw (eds.), Turbulent Shear Flows, vol. V, p. 278, Springer, New York, 1987.