Recent advances in surface-modified cellulose nanofibrils

Progress in Polymer Science

Volumn 88, Issue , 2019, Pages 241-264

  Rol, Fleur ^a   Belgacem, Mohamed Naceur ^a,b   Gandini, Alessandro ^a   Bras, Julien ^a,b  

^a UNIV GRENOBLE ALPES   (France)

^b INSTITUT UNIVERSITAIRE DE FRANCE   (France)

Author keywords

Adsorption; Bacterial cellulose; Cellulose pretreatment; Chemical modification; Grafting; Nanofibrillated cellulose (CNF)

Indexed keywords

ADSORPTION; BIOCOMPATIBILITY; BIOLOGICAL MATERIALS; CHEMICAL MODIFICATION; ENERGY UTILIZATION; GRAFTING (CHEMICAL); MECHANICAL PROPERTIES; NANOCELLULOSE; NANOTECHNOLOGY;

BACTERIAL CELLULOSE; CELLULOSE PRETREATMENT; CHEMICAL MODIFICATION TECHNIQUES; CHEMICAL PRE-TREATMENT; HIGH ENERGY CONSUMPTION; MACROMOLECULAR MATRIX; NANOFIBRILLATED CELLULOSE; VALUE ADDED APPLICATIONS;

CELLULOSE;

ADSORPTION; CELLULOSE; CHEMICALS; COPOLYMERIZATION; ENERGY CONSUMPTION; MECHANICAL PROPERTIES; PRETREATMENT; PRODUCTION;

EID: 85053290052     PISSN: 00796700     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.progpolymsci.2018.09.002     Document Type: Review

References (300)

1. Turbak, A.F., Snyder, F., Sandberg, K., Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential. J Appl Polym Sci Appl Polym Symp 37 (1983), 815–827.
2. Trovatti, E., The future of bacterial cellulose and other microbial polysaccharides. J Renew Mater 1 (2013), 28–41.
3. Dufresne, A., Nanocellulose: a new ageless bionanomaterial. Mater Today 16 (2013), 220–227.
4. Nechyporchuk, O., Belgacem, M.N., Bras, J., Production of cellulose nanofibrils: a review of recent advances. Ind Crops Prod 93 (2016), 2–25.
5. Lavoine, N., Desloges, I., Dufresne, A., Bras, J., Microfibrillated cellulose – its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90 (2012), 735–764.
6. Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., et al. Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50 (2011), 5438–5466.
7. Saini, S., Yücel Falco, Ç Belgacem, M.N., Bras, J., Surface cationized cellulose nanofibrils for the production of contact active antimicrobial surfaces. Carbohydr Polym 135 (2016), 239–247.
8. Hoeng, F., Denneulin, A., Bras, J., Use of nanocellulose in printed electronics: a review. Nanoscale 8 (2016), 13131–13154.
9. R. Bardet, J. Bras, N. Belgacem, P. Agut, J. Dumas, Method for making paper. WO 2014118466 (A1), 2014.
10. Brodin, F., Gregersen, O., Syverud, K., Cellulose nanofibrils: challenges and possibilities as a paper additive or coating material: a review. Nord Pulp Pap Res J 29 (2014), 156–166.
11. Oksman, K., Aitomäki, Y., Mathew, A.P., Siqueira, G., Zhou, Q., Butylina, S., et al. Review of the recent developments in cellulose nanocomposite processing. Compos Part Appl Sci Manuf 83 (2016), 2–18.
12. Mariano, M., El Kissi, N., Dufresne, A., Cellulose nanocrystals and related nanocomposites: review of some properties and challenges. J Polym Sci Part B: Polym Phys 52 (2014), 791–806.
13. Jorfi, M., Foster, E.J., Recent advances in nanocellulose for biomedical applications. J Appl Polym Sci, 132, 2015 41719/1-19.
14. Dinand, E., Chanzy, H., Vignon, R.M., Suspensions of cellulose microfibrils from sugar beet pulp. Food Hydrocoll 13 (1999), 275–283.
15. Dufresne, A., Dupeyre, D., Vignon, M.R., Cellulose microfibrils from potato tuber cells: processing and characterization of starch–cellulose microfibril composites. J Appl Polym Sci 76 (2000), 2080–2092.
16. Iwamoto, S., Nakagaito, A.N., Yano, H., Nogi, M., Optically transparent composites reinforced with plant fiber-based nanofibers. Appl Phys A 81 (2005), 1109–1112.
17. Leitner, J., Hinterstoisser, B., Wastyn, M., Keckes, J., Gindl, W., Sugar beet cellulose nanofibril-reinforced composites. Cellulose 14 (2007), 419–425.
18. Naderi, A., Lindström, T., Sundström, J., Repeated homogenization, a route for decreasing the energy consumption in the manufacturing process of carboxymethylated nanofibrillated cellulose?. Cellulose 22 (2015), 1147–1157.
19. Nakagaito, A.N., Yano, H., The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites. Appl Phys A 78 (2004), 547–552.
20. Wang, S., Peng, X., Zhong, L., Jing, S., Cao, X., Lu, F., et al. Choline chloride/urea as an effective plasticizer for production of cellulose films. Carbohydr Polym 117 (2015), 133–139.
21. Taipale, T., Österberg, M., Nykänen, A., Ruokolainen, J., Laine, J., Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 17 (2010), 1005–1020.
22. Zimmermann, T., Pöhler, E., Geiger, T., Cellulose fibrils for polymer reinforcement. Adv Eng Mater 6 (2004), 754–761.
23. Bulota, M., Kreitsmann, K., Hughes, M., Paltakari, J., Acetylated microfibrillated cellulose as a toughening agent in poly(lactic acid). J Appl Polym Sci 126 (2012), E449–58.
24. Iwamoto, S., Nakagaito, A.N., Yano, H., Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites. Appl Phys A 89 (2007), 461–466.
25. Jonoobi, M., Mathew, A.P., Oksman, K., Producing low-cost cellulose nanofiber from sludge as new source of raw materials. Ind Crops Prod 40 (2012), 232–238.
26. Josset, S., Orsolini, P., Siqueira, G., Tejado, A., Tingaut, P., Zimmermann, T., Energy consumption of the nanofibrillation of bleached pulp, wheat straw and recycled newspaper through a grinding process. Nord Pulp Pap Res J 29 (2014), 167–175.
27. Nair, S.S., Zhu, J.Y., Deng, Y., Ragauskas, A.J., Characterization of cellulose nanofibrillation by micro grinding. J Nanopart Res, 16, 2014 2349/1-10.
28. Spence, K.L., Venditti, R.A., Rojas, O.J., Habibi, Y., Pawlak, J.J., A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods. Cellulose 18 (2011), 1097–1111.
29. Nechyporchuk, O., Pignon, F., Belgacem, M.N., Morphological properties of nanofibrillated cellulose produced using wet grinding as an ultimate fibrillation process. J Mater Sci 50 (2015), 531–541.
30. Pääkkö M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., et al. Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8 (2007), 1934–1941.
31. Henriksson, M., Henriksson, G., Berglund, L.A., Lindström, T., An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers. Eur Polym J 43 (2007), 3434–3441.
32. Saito, T., Isogai, A., TEMPO-mediated oxidation of native cellulose. The effect of oxidation conditions on chemical and crystal structures of the water-insoluble fractions. Biomacromolecules 5 (2004), 1983–1989.
33. Saito, T., Nishiyama, Y., Putaux, J.L., Vignon, M., Isogai, A., Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose. Biomacromolecules 7 (2006), 1687–1691.
34. Isogai, A., Saito, T., Fukuzumi, H., TEMPO-oxidized cellulose nanofibers. Nanoscale 3 (2011), 71–85.
35. Ho, T.T.T., Zimmermann, T., Hauert, R., Caseri, W., Preparation and characterization of cationic nanofibrillated cellulose from etherification and high-shear disintegration processes. Cellulose 18 (2011), 1391–1406.
36. Odabas, N., Amer, H., Bacher, M., Henniges, U., Potthast, A., Rosenau, T., Properties of cellulosic material after cationization in different solvents. ACS Sustain Chem Eng 4 (2016), 2295–2301.
37. Larsson, P.A., Gimåker, M., Wågberg, L., The influence of periodate oxidation on the moisture sorptivity and dimensional stability of paper. Cellulose 15 (2008), 837–847.
38. Larsson, P.A., Berglund, L.A., Wågberg, L., Ductile all-cellulose nanocomposite films fabricated from core–shell structured cellulose nanofibrils. Biomacromolecules 15 (2014), 2218–2223.
39. Yang, H., Chen, D., van de Ven, T.G.M., Preparation and characterization of sterically stabilized nanocrystalline cellulose obtained by periodate oxidation of cellulose fibers. Cellulose 22 (2015), 1743–1752.
40. Kangas, H., Lahtinen, P., Sneck, A., Saariaho, A.M., Laitinen, O., Hellén, E., Characterization of fibrillated celluloses. A short review and evaluation of characteristics with a combination of methods. Nord Pulp Pap Res J 29 (2014), 129–143.
41. Desmaisons, J., Boutonnet, E., Rueff, M., Dufresne, A., Bras, J., A new quality index for benchmarking of different cellulose nanofibrils. Carbohydr Polym 174 (2017), 318–329.
42. García, A., Gandini, A., Labidi, J., Belgacem, N., Bras, J., Industrial and crop wastes: a new source for nanocellulose biorefinery. Ind Crops Prod 93 (2016), 26–38.
43. Billet, R., Fromental, J., Nanocellulose Study. TKM presentation. 2017 Grenoble, France.
44. Wang, B., Sain, M., Isolation of nanofibers from soybean source and their reinforcing capability on synthetic polymers. Compos Sci Technol 67 (2007), 2521–2527.
45. Taheri, H., Samyn, P., Effect of homogenization (microfluidization) process parameters in mechanical production of micro- and nanofibrillated cellulose on its rheological and morphological properties. Cellulose 23 (2016), 1221–1238.
46. Correia, Vda C., dos Santos, V., Sain, M., Santos, S.F., Leão, A.L., Junior, H.S., Grinding process for the production of nanofibrillated cellulose based on unbleached and bleached bamboo organosolv pulp. Cellulose 23 (2016), 2971–2987.
47. Abe, K., Iwamoto, S., Yano, H., Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromolecules 8 (2007), 3276–3278.
48. Ho, T.T.T., Abe, K., Zimmermann, T., Yano, H., Nanofibrillation of pulp fibers by twin-screw extrusion. Cellulose 22 (2014), 421–433.
49. Baati, R., Magnin, A., Boufi, S., High solid content production of nanofibrillar cellulose via continuous extrusion. ACS Sustain Chem Eng 5 (2017), 2350–2359.
50. Rol, F., Karakashov, B., Nechyporchuk, O., Terrien, M., Meyer, V., Dufresne, A., et al. Pilot scale twin screw extrusion and chemical pretreatment as an energy efficient method for the production of nanofibrillated cellulose at high solid content. ACS Sustain Chem Eng 5 (2017), 6524–6531.
51. Hietala, M., Niinimäki, J., Oksman, K., The use of twin-screw extrusion in processing of wood: the effect of processing parameters and pretreatment. BioResources 6 (2011), 4615–4625.
52. I. Heiskanen, A. Harlin, K. Backfolk, R. Laitinen, Process for production of microfibrillated cellulose in an extruder and microfibrillated cellulose produced according to the process. WO 2011051882 (A1), 2011.
53. J. Hiltunen, K. Kemppainen, J. Pere, Process for producing fibrillated cellulose material. WO 2015092146 (A1), 2015.
54. Suzuki, K., Okumura, H., Kitagawa, K., Sato, S., Nakagaito, A.N., Yano, H., Development of continuous process enabling nanofibrillation of pulp and melt compounding. Cellulose 20 (2013), 201–210.
55. H. Yano, K. Yano, Y. Motegi, Process for production of aliphatic polyester composition, pulp and cellulosic fiber to be used therein, and process for microfibrillation thereof. WO 2005003450 A1, 2007.
56. Chaker, A., Alila, S., Mutjé P., Vilar, M.R., Boufi, S., Key role of the hemicellulose content and the cell morphology on the nanofibrillation effectiveness of cellulose pulps. Cellulose 20 (2013), 2863–2875.
57. Boufi, S., Chaker, A., Easy production of cellulose nanofibrils from corn stalk by a conventional high speed blender. Ind Crops Prod 93 (2016), 39–47.
58. Jiang, F., Hsieh, Y.L., Chemically and mechanically isolated nanocellulose and their self-assembled structures. Carbohydr Polym 95 (2013), 32–40.
59. Nakagaito, A.N., Ikenaga, K., Takagi, H., Cellulose nanofiber extraction from grass by a modified kitchen blender. Mod Phys Lett B, 29, 2015 1540039/1-5.
60. Uetani, K., Yano, H., Nanofibrillation of wood pulp using a high-speed blender. Biomacromolecules 12 (2011), 348–353.
61. Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., Hai, Y., Individualization of cellulose nanofibers from wood using high-intensity ultrasonication combined with chemical pretreatments. Carbohydr Polym 83 (2011), 1804–1811.
62. Cheng, Q., Wang, S., Rials, T.G., Poly(vinyl alcohol) nanocomposites reinforced with cellulose fibrils isolated by high intensity ultrasonication. Compos Part Appl Sci Manuf 40 (2009), 218–224.
63. Santucci, B.S., Bras, J., Belgacem, M.N., Curvelo, A.Ada.S., Pimenta, M.T.B., Evaluation of the effects of chemical composition and refining treatments on the properties of nanofibrillated cellulose films from sugarcane bagasse. Ind Crops Prod 91 (2016), 238–248.
64. Wang, S., Cheng, Q., A novel process to isolate fibrils from cellulose fibers by high-intensity ultrasonication, part 1: process optimization. J Appl Polym Sci 113 (2009), 1270–1275.
65. Dufresne, A., Cavaillé J.Y., Vignon, M.R., Mechanical behavior of sheets prepared from sugar beet cellulose microfibrils. J Appl Polym Sci 64 (1997), 1185–1194.
66. Wang, B., Sain, M., Oksman, K., Study of structural morphology of hemp fiber from the micro to the nanoscale. Appl Compos Mater 14 (2007), 89–103.
67. Bhatnagar, A., Sain, M., Processing of cellulose nanofiber-reinforced composites. J Reinf Plast Compos 24 (2005), 1259–1268.
68. Cherian, B.M., Leão, A.L., de Souza, S.F., Thomas, S., Pothan, L.A., Kottaisamy, M., Isolation of nanocellulose from pineapple leaf fibres by steam explosion. Carbohydr Polym 81 (2010), 720–725.
69. Deepa, B., Abraham, E., Cherian, B.M., Bismarck, A., Blaker, J.J., Pothan, L.A., et al. Structure, morphology and thermal characteristics of banana nano fibers obtained by steam explosion. Bioresour Technol 102 (2011), 1988–1997.
70. Kaushik, A., Singh, M., Isolation and characterization of cellulose nanofibrils from wheat straw using steam explosion coupled with high shear homogenization. Carbohydr Res 346 (2011), 76–85.
71. Deng, S., Huang, R., Zhou, M., Chen, F., Fu, Q., Hydrophobic cellulose films with excellent strength and toughness via ball milling activated acylation of microfibrillated cellulose. Carbohydr Polym 154 (2016), 129–138.
72. Kekäläinen, K., Liimatainen, H., Biale, F., Niinimäki, J., Nanofibrillation of TEMPO-oxidized bleached hardwood kraft cellulose at high solids content. Holzforschung 69 (2015), 1077–1088.
73. Liimatainen, H., Sirviö J.A., Kekäläinen, K., Hormi, O., High-consistency milling of oxidized cellulose for preparing microfibrillated cellulose films. Cellulose 22 (2015), 3151–3160.
74. Phanthong, P., Karnjanakom, S., Reubroycharoen, P., Hao, X., Abudula, A., Guan, G., A facile one-step way for extraction of nanocellulose with high yield by ball milling with ionic liquid. Cellulose 24 (2017), 2083–2093.
75. Zhang, L., Tsuzuki, T., Wang, X., Preparation of cellulose nanofiber from softwood pulp by ball milling. Cellulose 22 (2015), 1729–1741.
76. Kondo, T., Kose, R., Naito, H., Kasai, W., Aqueous counter collision using paired water jets as a novel means of preparing bio-nanofibers. Carbohydr Polym 112 (2014), 284–290.
77. Kose, R., Mitani, I., Kasai, W., Kondo, T., “Nanocellulose” as a single nanofiber prepared from pellicle secreted by Gluconacetobacter xylinus using aqueous counter collision. Biomacromolecules 12 (2011), 716–720.
78. W. Bolaski, J. Gallatin, Enzymic conversion of cellulosic fibers. US 3041246, 1962.
79. Zhou, S., Ingram, L.O., Synergistic hydrolysis of carboxymethyl cellulose and acid-swollen cellulose by two endoglucanases (CelZ and CelY) from Erwinia chrysanthemi. J Bacteriol 182 (2000), 5676–5682.
80. Siqueira, G., Tapin-Lingua, S., Bras, J., DdaS, Perez, Dufresne, A., Morphological investigation of nanoparticles obtained from combined mechanical shearing, and enzymatic and acid hydrolysis of sisal fibers. Cellulose 17 (2010), 1147–1158.
81. Qing, Y., Sabo, R., Zhu, J.Y., Agarwal, U., Cai, Z., Wu, Y., A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches. Carbohydr Polym 97 (2013), 226–234.
82. Rosgaard, L., Pedersen, S., Langston, J., Akerhielm, D., Cherry, J.R., Meyer, A.S., Evaluation of minimal Trichoderma reesei cellulase mixtures on differently pretreated barley straw substrates. Biotechnol Prog 23 (2007), 1270–1276.
83. Turon, X., Rojas, O.J., Deinhammer, R.S., Enzymatic kinetics of cellulose hydrolysis: a QCM-D study. Langmuir 24 (2008), 3880–3887.
84. Harris, P.V., Welner, D., McFarland, K.C., Re, E., Navarro Poulsen, J.C., Brown, K., et al. Stimulation of lignocellulosic biomass hydrolysis by proteins of glycoside hydrolase family 61: structure and function of a large, enigmatic family. Biochemistry 49 (2010), 3305–3316.
85. Hu, J., Arantes, V., Saddler, J.N., The enhancement of enzymatic hydrolysis of lignocellulosic substrates by the addition of accessory enzymes such as xylanase: is it an additive or synergistic effect?. Biotechnol Biofuels, 4, 2011 36/1-13.
86. Hu, J., Chandra, R., Arantes, V., Gourlay, K., Susan van Dyk, J., Saddler, J.N., The addition of accessory enzymes enhances the hydrolytic performance of cellulase enzymes at high solid loadings. Bioresour Technol 186 (2015), 149–153.
87. Rodríguez-Zúñiga, U.F., Cannella, D., Giordano, RdeC, Giordano, Rde L.C., Jørgensen, H., Felby, C., Lignocellulose pretreatment technologies affect the level of enzymatic cellulose oxidation by LPMO. Green Chem 17 (2015), 2896–2903.
88. Long, L., Tian, D., Hu, J., Wang, F., Saddler, J., A xylanase-aided enzymatic pretreatment facilitates cellulose nanofibrillation. Bioresour Technol 243 (2017), 898–904.
89. Saito, T., Isogai, A., Introduction of aldehyde groups on surfaces of native cellulose fibers by TEMPO-mediated oxidation. Colloids Surf Physicochem Eng Asp 289 (2006), 219–225.
90. Isogai, T., Saito, T., Isogai, A., Wood cellulose nanofibrils prepared by TEMPO electro-mediated oxidation. Cellulose 18 (2011), 421–431.
91. Saito, T., Hirota, M., Tamura, N., Kimura, S., Fukuzumi, H., Heux, L., et al. Individualization of nano-sized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions. Biomacromolecules 10 (2009), 1992–1996.
92. Saito, T., Kimura, S., Nishiyama, Y., Isogai, A., Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules 8 (2007), 2485–2491.
93. Zhao, M., Li, J., Mano, E., Song, Z., Tschaen, D.M., Grabowski, E.J.J., et al. Oxidation of primary alcohols to carboxylic acids with sodium chlorite catalyzed by TEMPO and bleach. J Org Chem 64 (1999), 2564–2566.
94. Inamochi, T., Funahashi, R., Nakamura, Y., Saito, T., Isogai, A., Effect of coexisting salt on TEMPO-mediated oxidation of wood cellulose for preparation of nanocellulose. Cellulose, 24, 2017 4097-01.
95. Hirota, M., Tamura, N., Saito, T., Isogai, A., Oxidation of regenerated cellulose with NaClO2 catalyzed by TEMPO and NaClO under acid-neutral conditions. Carbohydr Polym 78 (2009), 330–335.
96. Isogai, T., Saito, T., Isogai, A., TEMPO electromediated oxidation of some polysaccharides including regenerated cellulose Fiber. Biomacromolecules 11 (2010), 1593–1599.
97. Jaušovec, D., Vogrinčič R., Kokol, V., Introduction of aldehyde vs. carboxylic groups to cellulose nanofibers using laccase/TEMPO mediated oxidation. Carbohydr Polym 116 (2015), 74–85.
98. Rohaizu, R., Wanrosli, W.D., Sono-assisted TEMPO oxidation of oil palm lignocellulosic biomass for isolation of nanocrystalline cellulose. Ultrason Sonochem 34 (2017), 631–639.
99. Sharma, P.R., Joshi, R., Sharma, S.K., Hsiao, B.S., A simple approach to prepare carboxycellulose nanofibers from untreated biomass. Biomacromolecules 18 (2017), 2333–2342.
100. Heinze, T., Koschella, A., Carboxymethyl ethers of cellulose and starch – a review. Macromol Symp 223 (2005), 13–40.
101. Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., Axnäs, K., The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes. Langmuir 24 (2008), 784–795.
102. Eyholzer, C., Bordeanu, N., Lopez-Suevos, F., Rentsch, D., Zimmermann, T., Oksman, K., Preparation and characterization of water-redispersible nanofibrillated cellulose in powder form. Cellulose 17 (2009), 19–30.
103. Eyholzer, C., Borges de Couraça, A., Duc, F., Bourban, P.E., Tingaut, P., Zimmermann, T., et al. Biocomposite hydrogels with carboxymethylated, nanofibrillated cellulose powder for replacement of the nucleus pulposus. Biomacromolecules 12 (2011), 1419–1427.
104. Aulin, C., Ahola, S., Josefsson, P., Nishino, T., Hirose, Y., Österberg, M., et al. Nanoscale cellulose films with different crystallinities and mesostructures—their surface properties and interaction with water. Langmuir 25 (2009), 7675–7685.
105. Siró I., Plackett, D., Hedenqvist, M., Ankerfors, M., Lindström, T., Highly transparent films from carboxymethylated microfibrillated cellulose: the effect of multiple homogenization steps on key properties. J Appl Polym Sci 119 (2011), 2652–2660.
106. Naderi, A., Erlandsson, J., Sundström, J., Lindström, T., Enhancing the properties of carboxymethylated nanofibrillated cellulose by inclusion of water in the pre-treatment process. Nord Pulp Pap Res J 31 (2016), 372–378.
107. Naderi, A., Lindström, T., Erlandsson, J., Sundström, J., Flodberg, G., A comparative study of the properties of three nano-fibrillated cellulose systems that have been produced at about the same energy consumption levels in the mechanical delamination step. Nord Pulp Pap Res J 31 (2016), 364–371.
108. Naderi, A., Lindström, T., Sundström, J., Carboxymethylated nanofibrillated cellulose: rheological studies. Cellulose 21 (2014), 1561–1571.
109. Naderi, A., Lindström, T., Sundström, J., Flodberg, G., Can redispersible low-charged nanofibrillated cellulose be produced by the addition of carboxymethyl cellulose?. Nord Pulp Pap Res J 30 (2015), 568–577.
110. Stigsson, V., Kloow, G., Germgård, U., The influence of the solvent system used during manufacturing of CMC. Cellulose 13 (2006), 705–712.
111. Tijsen, C.J., Kolk, H.J., Stamhuis, E.J., Beenackers, A.A.C.M., An experimental study on the carboxymethylation of granular potato starch in non-aqueous media. Carbohydr Polym 45 (2001), 219–226.
112. Ghanadpour, M., Carosio, F., Larsson, P.T., Wågberg, L., Phosphorylated cellulose nanofibrils: a renewable nanomaterial for the preparation of intrinsically flame-retardant materials. Biomacromolecules 16 (2015), 3399–3410.
113. Naderi, A., Lindström, T., Weise, C.F., Flodberg, G., Sundström, J., Junel, K., et al. Phosphorylated nanofibrillated cellulose: production and properties. Nord Pulp Pap Res J 31 (2016), 020–029.
114. Noguchi, Y., Homma, I., Matsubara, Y., Complete nanofibrillation of cellulose prepared by phosphorylation. Cellulose 24 (2017), 1295–1305.
115. Jowkarderis, L., van de Ven, T.G.M., Intrinsic viscosity of aqueous suspensions of cellulose nanofibrils. Cellulose 21 (2014), 2511–2517.
116. Fukuzumi, H., Tanaka, R., Saito, T., Isogai, A., Dispersion stability and aggregation behavior of TEMPO-oxidized cellulose nanofibrils in water as a function of salt addition. Cellulose 21 (2014), 1553–1559.
117. Naderi, A., Koschella, A., Heinze, T., Shih, K.C., Nieh, M.P., Pfeifer, A., et al. Sulfoethylated nanofibrillated cellulose: production and properties. Carbohydr Polym 169 (2017), 515–523.
118. Hou, Q.X., Liu, W., Liu, Z.H., Bai, L.L., Characteristics of wood cellulose fibers treated with periodate and bisulfite. Ind Eng Chem Res 46 (2007), 7830–7837.
119. Zhang, K., Brendler, E., Gebauer, K., Gruner, M., Fischer, S., Synthesis and characterization of low sulfoethylated cellulose. Carbohydr Polym 83 (2011), 616–622.
120. Cai, X., Riedl, B., Ait-Kadi, A., Effect of surface-grafted ionic groups on the performance of cellulose-fiber-reinforced thermoplastic composites. J Polym Sci Part B: Polym Phys 41 (2003), 2022–2032.
121. Abbott, A.P., Bell, T.J., Handa, S., Stoddart, B., Cationic functionalisation of cellulose using a choline based ionic liquid analogue. Green Chem 8 (2006), 784–786.
122. Song, Y., Sun, Y., Zhang, X., Zhou, J., Zhang, L., Homogeneous quaternization of cellulose in NaOH/urea aqueous solutions as gene carriers. Biomacromolecules 9 (2008), 2259–2264.
123. Yan, L., Tao, H., Bangal, P.R., Synthesis and flocculation behavior of cationic cellulose prepared in a NaOH/urea aqueous solution. Clean (Weinh) 37 (2009), 39–44.
124. Song, Y., Zhang, J., Gan, W., Zhou, J., Zhang, L., Flocculation properties and antimicrobial activities of quaternized celluloses synthesized in NaOH/urea aqueous solution. Ind Eng Chem Res 49 (2010), 1242–1246.
125. Aulin, C., Johansson, E., Wågberg, L., Lindström, T., Self-organized films from cellulose I nanofibrils using the layer-by-layer technique. Biomacromolecules 11 (2010), 872–882.
126. Olszewska, A., Eronen, P., Johansson, L.S., Malho, J.M., Ankerfors, M., Lindström, T., et al. The behaviour of cationic nanofibrillar cellulose in aqueous media. Cellulose 18 (2011), 1213–1226.
127. Pei, A., Butchosa, N., Berglund, L.A., Zhou, Q., Surface quaternized cellulose nanofibrils with high water absorbency and adsorption capacity for anionic dyes. Soft Matter 9 (2013), 2047–2055.
128. Littunen, K., Snoei de Castro, J., Samoylenko, A., Xu, Q., Quaggin, S., Vainio, S., et al. Synthesis of cationized nanofibrillated cellulose and its antimicrobial properties. Eur Polym J 75 (2016), 116–124.
129. Sehaqui, H., Mautner, A., Perez de Larraya, U., Pfenninger, N., Tingaut, P., Zimmermann, T., Cationic cellulose nanofibers from waste pulp residues and their nitrate, fluoride, sulphate and phosphate adsorption properties. Carbohydr Polym 135 (2016), 334–340.
130. Chaker, A., Boufi, S., Cationic nanofibrillar cellulose with high antibacterial properties. Carbohydr Polym 131 (2015), 224–232.
131. Maatar, W., Boufi, S., Microporous cationic nanofibrillar cellulose aerogel as promising adsorbent of acid dyes. Cellulose 24 (2017), 1001–1015.
132. Liimatainen, H., Visanko, M., Sirviö J., Hormi, O., Niinimäki, J., Sulfonated cellulose nanofibrils obtained from wood pulp through regioselective oxidative bisulfite pre-treatment. Cellulose 20 (2013), 741–749.
133. Li, P., Sirviö J.A., Haapala, A., Liimatainen, H., Cellulose nanofibrils from nonderivatizing urea-based deep eutectic solvent pretreatments. ACS Appl Mater Interfaces 9 (2017), 2846–2855.
134. Sirviö J.A., Visanko, M., Liimatainen, H., Deep eutectic solvent system based on choline chloride-urea as a pre-treatment for nanofibrillation of wood cellulose. Green Chem 17 (2015), 3401–3406.
135. Kim, U.J., Kuga, S., Wada, M., Okano, T., Kondo, T., Periodate oxidation of crystalline cellulose. Biomacromolecules 1 (2000), 488–492.
136. Buxton, G.V., Greenstock, C.L., Helman, W.P., Ross, A.B., Critical review of rate constants for reactions of hydrated electrons, hydrogen atoms and hydroxyl radicals (OH/O−) in aqueous solution. J Phys Chem Ref Data 17 (1988), 513–886.
137. Painter, T.J., Control of depolymerisation during the preparation of reduced dialdehyde cellulose. Carbohydr Res 179 (1988), 259–268.
138. Larsson, P.A., Berglund, L.A., Wågberg, L., Highly ductile fibres and sheets by core-shell structuring of the cellulose nanofibrils. Cellulose 21 (2013), 323–333.
139. Sirviö J., Liimatainen, H., Niinimäki, J., Hormi, O., Dialdehyde cellulose microfibers generated from wood pulp by milling-induced periodate oxidation. Carbohydr Polym 86 (2011), 260–265.
140. Sirvio, J., Hyvakko, U., Liimatainen, H., Niinimaki, J., Hormi, O., Periodate oxidation of cellulose at elevated temperatures using metal salts as cellulose activators. Carbohydr Polym 83 (2011), 1293–1297.
141. Kasai, W., Morooka, T., Ek, M., Mechanical properties of films made from dialcohol cellulose prepared by homogeneous periodate oxidation. Cellulose 21 (2013), 769–776.
142. W.M. Hearon, J.F. Witte, C.F. Lo, Process for the production of dialdehyde cellulose from cellulose. US 4082743, 1978.
143. Liimatainen, H., Visanko, M., Sirviö J.A., Hormi, O.E.O., Niinimaki, J., Enhancement of the nanofibrillation of wood cellulose through sequential periodate–chlorite oxidation. Biomacromolecules 13 (2012), 1592–1597.
144. Kekäläinen, K., Liimatainen, H., Niinimäki, J., Disintegration of periodate–chlorite oxidized hardwood pulp fibres to cellulose microfibrils: kinetics and charge threshold. Cellulose 21 (2014), 3691–3700.
145. Suopajärvi, T., Liimatainen, H., Hormi, O., Niinimäki, J., Coagulation–flocculation treatment of municipal wastewater based on anionized nanocelluloses. Chem Eng J 231 (2013), 59–67.
146. Liimatainen, H., Ezekiel, N., Sliz, R., Ohenoja, K., Sirviö J.A., Berglund, L., et al. High-strength nanocellulose–talc hybrid barrier films. ACS Appl Mater Interfaces 5 (2013), 13412–13418.
147. Sirviö J.A., Anttila, A.K., Pirttilä A.M., Liimatainen, H., Kilpeläinen, I., Niinimäki, J., et al. Cationic wood cellulose films with high strength and bacterial anti-adhesive properties. Cellulose 21 (2014), 3573–3583.
148. Sirviö J., Honka, A., Liimatainen, H., Niinimäki, J., Hormi, O., Synthesis of highly cationic water-soluble cellulose derivative and its potential as novel biopolymeric flocculation agent. Carbohydr Polym 86 (2011), 266–270.
149. Suopajärvi, T., Sirviö J.A., Liimatainen, H., Cationic nanocelluloses in dewatering of municipal activated sludge. J Environ Chem Eng 5 (2017), 86–92.
150. R.T. Shet, P.R.R. Wallajapet, Sulfonated cellulose having improved absorbent properties. US5703225, 1997.
151. Zhang, J., Jiang, N., Dang, Z., Elder, T.J., Ragauskas, A.J., Oxidation and sulfonation of cellulosics. Cellulose 15 (2008), 489–496.
152. Pan, S., Ragauskas, A.J., Enhancement of nanofibrillation of softwood cellulosic fibers by oxidation and sulfonation. Carbohydr Polym 111 (2014), 514–523.
153. Sirviö J.A., Kolehmainen, A., Visanko, M., Liimatainen, H., Niinimäki, J., Hormi, O.E.O., Strong, self-standing oxygen barrier films from nanocelluloses modified with regioselective oxidative treatments. ACS Appl Mater Interfaces 6 (2014), 14384–14390.
154. Ozone, Meyer V., An efficient chemical for microfibrils separation by homogenization. Tappi nano 2016 conference 2016 Grenoble, 2016.
155. M.A. Bilodeau, M.A. Paradis, Energy efficient process for preparing nanocellulose fibers. US 20150167243 A1, 2015.
156. Beheshti Tabar, I., Zhang, X., Youngblood, J.P., Mosier, N.S., Production of cellulose nanofibers using phenolic enhanced surface oxidation. Carbohydr Polym 174 (2017), 120–127.
157. Pouyet, F., Chirat, C., Potthast, A., Lachenal, D., Formation of carbonyl groups on cellulose during ozone treatment of pulp: consequences for pulp bleaching. Carbohydr Polym 109 (2014), 85–91.
158. Zhang, Q., Vigier, K.D.O., Royer, S., Jérôme, F., Deep eutectic solvents: syntheses, properties and applications. Chem Soc Rev 41 (2012), 7108–7146.
159. Suopajärvi, T., Sirviö J.A., Liimatainen, H., Nanofibrillation of deep eutectic solvent-treated paper and board cellulose pulps. Carbohydr Polym 169 (2017), 167–175.
160. Budtova, T., Navard, P., Cellulose in NaOH–water based solvents: a review. Cellulose 23 (2015), 5–55.
161. Abe, K., Nanofibrillation of dried pulp in NaOH solutions using bead milling. Cellulose 23 (2016), 1257–1261.
162. Mao, J., Abushammala, H., Hettegger, H., Rosenau, T., Laborie, M.P., Imidazole: a new tunable reagent for producing nanocellulose. Polymers, 9, 2017 473/1-11.
163. Morais, A.R.C., Pinto, J.V., Nunes, D., Roseiro, L.B., Oliveira, M.C., Fortunato, E., et al. Imidazole: prospect solvent for lignocellulosic biomass fractionation and delignification. ACS Sustain Chem Eng 4 (2016), 1643–1652.
164. Naderi, A., Lindström, T., Sundström, J., Pettersson, T., Flodberg, G., Erlandsson, J., Microfluidized carboxymethyl cellulose modified pulp: a nanofibrillated cellulose system with some attractive properties. Cellulose 22 (2015), 1159–1173.
165. M. Ankefors, T. Lindstroem, Method for providing nanocellulose comprising modified cellulose fibers. WO 2009126106, 2009.
166. Ahola, S., Myllytie, P., Österberg, M., Teerinen, T., Laine, J., Effet of polymer adsorption on cellulose nanofibri water binding capacity and aggregation. Bioresour Technol 3 (2008), 1315–1328.
167. Laine, J., Lindström, T., Nordmark, G.G., Risinger, G., Studies on topochemical modification of cellulosic fibres. Part 1. Chemical conditions for the attachment of carboxymethyl cellulose onto fibres. Nord Pulp Pap Res J 15 (2000), 520–526.
168. J. Paltakari, J. Laine, M. Osterberg, R. Subramanian, J. E. Teirfolk. A method for producing modified cellulose. WO 2010092239 2010.
169. Mohanty, A.K., Misra, M., Hinrichsen, G., Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 276–277 (2000), 1–24.
170. Belgacem, M.N., Gandini, A., Physical, chemical and physico-chemical modification of cellulose fibers. Compos Interfaces 12 (2005), 41–75.
171. Belgacem, M.N., Gandini, A., Surface modification of cellulose fibers. Belgacem, M., Gandini, A., (eds.) Monomers, polymers and composites from renewable resources, 2008, Elsevier Ltd., Amsterdam, 385–400.
172. Gandini, A., Belgacem, M.N., Modifying cellulose fiber surface in the manufacture of nature fiber composites. Zafeiropoulos, N., (eds.) Interface engineering of natural fibre composites for maximum performance, 2011, Woodhead Publishing, Cambridge, 3–42.
173. Missoum, K., Belgacem, M.N., Bras, J., Nanofibrillated cellulose surface modification: a review. Materials 6 (2013), 1745–1766.
174. Gandini, A., Belgacem, M.N., The surface and in-depth modification of cellulose fibers. Rojas, O., (eds.) Cellulose chemistry and properties: fibers, nanocelluloses and advanced materials, 2015, Springer, New York, 169–206.
175. Hatton, F.L., Malmström, E., Carlmark, A., Tailor-made copolymers for the adsorption to cellulosic surfaces. Eur Polym J 65 (2015), 325–339.
176. Martins, N.C.T., Freire, C.S.R., Pinto, R.J.B., Fernandes, S.C.M., Neto, C.P., Silvestre, A.J.D., et al. Electrostatic assembly of Ag nanoparticles onto nanofibrillated cellulose for antibacterial paper products. Cellulose 19 (2012), 1425–1436.
177. Utsel, S., Malmström, E., Carlmark, A., Wågberg, L., Thermoresponsive nanocomposites from multilayers of nanofibrillated cellulose and specially designed N-isopropylacrylamide based polymers. Soft Matter 6 (2010), 342–352.
178. Larsson, E., Sanchez, C.C., Porsch, C., Karabulut, E., Wågberg, L., Carlmark, A., Thermo-responsive nanofibrillated cellulose by polyelectrolyte adsorption. Eur Polym J 49 (2013), 2689–2696.
179. Karppinen, A., Vesterinen, A.H., Saarinen, T., Pietikäinen, P., Seppälä J., Effect of cationic polymethacrylates on the rheology and flocculation of microfibrillated cellulose. Cellulose 18 (2011), 1381–1390.
180. Galván, M.V., Peresin, M.S., Mocchiutti, P., Granqvist, N., Zanuttini, M.Á Tammelin, T., Effects of charge ratios of xylan-poly(allylamine hydrochloride) complexes on their adsorption onto different surfaces. Cellulose 22 (2015), 2955–2970.
181. Mocchiutti, P., Schnell, C.N., Rossi, G.D., Peresin, M.S., Zanuttini, M.A., Galván, M.V., Cationic and anionic polyelectrolyte complexes of xylan and chitosan. Interaction with lignocellulosic surfaces. Carbohydr Polym 150 (2016), 89–98.
182. Raj, P., Batchelor, W., Blanco, A., de la Fuente, E., Negro, C., Garnier, G., Effect of polyelectrolyte morphology and adsorption on the mechanism of nanocellulose flocculation. J Colloid Interface Sci 481 (2016), 158–167.
183. Raj, P., Varanasi, S., Batchelor, W., Garnier, G., Effect of cationic polyacrylamide on the processing and properties of nanocellulose films. J Colloid Interface Sci 447 (2015), 113–119.
184. Aulin, C., Shchukarev, A., Lindqvist, J., Malmström, E., Wågberg, L., Lindström, T., Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces. J Colloid Interface Sci 317 (2008), 556–567.
185. Syverud, K., Xhanari, K., Chinga-Carrasco, G., Yu, Y., Stenius, P., Films made of cellulose nanofibrils: surface modification by adsorption of a cationic surfactant and characterization by computer-assisted electron microscopy. J Nanopart Res 13 (2011), 773–782.
186. Xhanari, K., Syverud, K., Chinga-Carrasco, G., Paso, K., Stenius, P., Reduction of water wettability of nanofibrillated cellulose by adsorption of cationic surfactants. Cellulose 18 (2011), 257–270.
187. Olszewska, A., Junka, K., Nordgren, N., Laine, J., Rutland, M.W., Österberg, M., Non-ionic assembly of nanofibrillated cellulose and polyethylene glycol grafted carboxymethyl cellulose and the effect of aqueous lubrication in nanocomposite formation. Soft Matter 9 (2013), 7448–7457.
188. Eronen, P., Österberg, M., Heikkinen, S., Tenkanen, M., Laine, J., Interactions of structurally different hemicelluloses with nanofibrillar cellulose. Carbohydr Polym 86 (2011), 1281–1290.
189. Lozhechnikova, A., Dax, D., Vartiainen, J., Willför, S., Xu, C., Österberg, M., Modification of nanofibrillated cellulose using amphiphilic block-structured galactoglucomannans. Carbohydr Polym 110 (2014), 163–172.
190. Hatton, F.L., Engström, J., Forsling, J., Malmström, E., Carlmark, A., Biomimetic adsorption of zwitterionic–xyloglucan block copolymers to CNF: towards tailored super-absorbing cellulose materials. RSC Adv 7 (2017), 14947–14958.
191. Vuoriluoto, M., Orelma, H., Johansson, L.S., Zhu, B., Poutanen, M., Walther, A., et al. Effect of molecular architecture of PDMAEMA–POEGMA random and block copolymers on their adsorption on regenerated and anionic nanocelluloses and evidence of interfacial water expulsion. J Phys Chem B 119 (2015), 15275–15286.
192. Vuoriluoto, M., Orelma, H., Zhu, B., Johansson, L.S., Rojas, O.J., Control of protein affinity of bioactive nanocellulose and passivation using engineered block and random copolymers. ACS Appl Mater Interfaces 8 (2016), 5668–5678.
193. Sakakibara, K., Yano, H., Tsujii, Y., Surface engineering of cellulose nanofiber by adsorption of diblock copolymer dispersant for green nanocomposite materials. ACS Appl Mater Interfaces 8 (2016), 24893–24900.
194. Kontturi, K.S., Biegaj, K., Mautner, A., Woodward, R.T., Wilson, B.P., Johansson, L.S., et al. Noncovalent surface modification of cellulose nanopapers by adsorption of polymers from aprotic solvents. Langmuir 33 (2017), 5707–5712.
195. Grande, R., Trovatti, E.F., Carvalho, A.J., Gandini, A., Continuous microfiber drawing by interfacial charge complexation between anionic cellulose nanofibers and cationic chitosan. J Mater Chem A: Mater Energy Sustain 5 (2017), 13098–13103.
196. Cunha, A.G., Gandini, A., Turning polysaccharides into hydrophobic materials: a critical review. Part 1. Cellulose. Cellulose 17 (2010), 875–889.
197. Berlioz, S., Molina-Boisseau, S., Nishiyama, Y., Heux, L., Gas-phase surface esterification of cellulose microfibrils and whiskers. Biomacromolecules 10 (2009), 2144–2151.
198. Boufi, S., Belgacem, M.N., Modified cellulose fibres for adsorption of dissolved organic solutes. Cellulose 13 (2006), 81–94.
199. Bras, J., Vaca-Garcia, C., Borredon, M.E., Glasser, W., Oxygen and water vapor permeability of fully substituted long chain cellulose esters (LCCE). Cellulose 14 (2007), 367–374.
200. Pasquini, D., Teixeira, Ede M., Curvelo, A.Ada S., Belgacem, M.N., Dufresne, A., Surface esterification of cellulose fibres: processing and characterisation of low-density polyethylene/cellulose fibres composites. Compos Sci Technol 68 (2008), 193–201.
201. Crépy, L., Chaveriat, L., Banoub, J., Martin, P., Joly, N., Synthesis of cellulose fatty esters as plastics—influence of the degree of substitution and the fatty chain length on mechanical properties. ChemSusChem 2 (2009), 165–170.
202. Kim, D.Y., Nishiyama, Y., Kuga, S., Surface acetylation of bacterial cellulose. Cellulose 9 (2002), 361–367.
203. Ifuku, S., Nogi, M., Abe, K., Handa, K., Nakatsubo, F., Yano, H., Surface modification of bacterial cellulose nanofibers for property enhancement of optically transparent composites: dependence on acetyl-group DS. Biomacromolecules 8 (2007), 1973–1978.
204. Nogi, M., Abe, K., Handa, K., Nakatsubo, F., Ifuku, S., Yano, H., Property enhancement of optically transparent bionanofiber composites by acetylation. Appl Phys Lett, 89, 2006 233123/1-3.
205. Rodionova, G., Lenes, M., Eriksen, Ø Gregersen, Ø., Surface chemical modification of microfibrillated cellulose: improvement of barrier properties for packaging applications. Cellulose 18 (2011), 127–134.
206. Mashkour, M., Afra, E., Resalati, H., Mashkour, M., Moderate surface acetylation of nanofibrillated cellulose for the improvement of paper strength and barrier properties. RSC Adv 5 (2015), 60179–60187.
207. Zepic, V., Poljansek, I., Oven, P., Skapin, A., Hancic, A., Effect of drying pretreatment on the acetylation of nanofibrillated cellulose. BioResources 10 (2015), 8148–8167.
208. Tingaut, P., Zimmermann, T., Lopez-Suevos, F., Synthesis and characterization of bionanocomposites with tunable properties from poly(lactic acid) and acetylated microfibrillated cellulose. Biomacromolecules 11 (2010), 454–464.
209. Jonoobi, M., Harun, J., Mathew, A.P., Hussein, M.Z.B., Oksman, K., Preparation of cellulose nanofibers with hydrophobic surface characteristics. Cellulose 17 (2010), 299–307.
210. Singh, M., Kaushik, A., Ahuja, D., Surface functionalization of nanofibrillated cellulose extracted from wheat straw: effect of process parameters. Carbohydr Polym 150 (2016), 48–56.
211. Nishino, T., Matsuda, I., Hirao, K., All-cellulose composite. Macromolecules 37 (2004), 7683–7687.
212. Nishino, T., Arimoto, N., All-cellulose composite prepared by selective dissolving of fiber surface. Biomacromolecules 8 (2007), 2712–2716.
213. Orelma, H., Korpela, A., Kunnari, V., Harlin, A., Suurnäkki, A., Improving the mechanical properties of CNF films by NMMO partial dissolution with hot calender activation. Cellulose 24 (2017), 1691–1704.
214. Duchemin, B., Le Corre, D., Leray, N., Dufresne, A., Staiger, M.P., All-cellulose composites based on microfibrillated cellulose and filter paper via a NaOH-urea solvent system. Cellulose 23 (2016), 593–609.
215. Cunha, A.G., Mougel, J.B., Cathala, B., Berglund, L.A., Capron, I., Preparation of double pickering emulsions stabilized by chemically tailored nanocelluloses. Langmuir 30 (2014), 9327–9335.
216. Agustin, M.B., Nakatsubo, F., Yano, H., Improved resistance of chemically-modified nanocellulose against thermally-induced depolymerization. Carbohydr Polym 164 (2017), 1–7.
217. Madivoli, E.S., Kareru, P.G., Gachanja, A.N., Mugo, S., Murigi, M.K., Kairigo, P.K., et al. Adsorption of selected heavy metals on modified nano cellulose. Int Res J Pure Appl Chem 12 (2016), 1–9.
218. Ma, J., Wang, X., Fu, Q., Si, Y., Yu, J., Ding, B., Highly carbonylated cellulose nanofibrous membranes utilizing maleic anhydride grafting for efficient lysozyme adsorption. ACS Appl Mater Interfaces 7 (2015), 15658–15666.
219. Yan, Y., Amer, H., Rosenau, T., Zollfrank, C., Dörrstein, J., Jobst, C., et al. Dry, hydrophobic microfibrillated cellulose powder obtained in a simple procedure using alkyl ketene dimer. Cellulose 23 (2016), 1189–1197.
220. Missoum, K., Naceur Belgacem, M., Barnes, J.P., Brochier-Salon, M.C., Bras, J., Nanofibrillated cellulose surface grafting in ionic liquid. Soft Matter 8 (2012), 8338–8349.
221. Ávila Ramírez, J.A., Suriano, C.J., Cerrutti, P., Foresti, M.L., Surface esterification of cellulose nanofibers by a simple organocatalytic methodology. Carbohydr Polym 114 (2014), 416–423.
222. Saini, S., Belgacem, N., Mendes, J., Elegir, G., Bras, J., Contact antimicrobial surface obtained by chemical grafting of microfibrillated cellulose in aqueous solution limiting antibiotic release. ACS Appl Mater Interfaces 7 (2015), 18076–18085.
223. Abdelmouleh, M., Boufi, S., Belgacem, M.N., Dufresne, A., Gandini, A., Modification of cellulose fibers with functionalized silanes: effect of the fiber treatment on the mechanical performances of cellulose–thermoset composites. J Appl Polym Sci 98 (2005), 974–984.
224. Brochier Salon, M.C., Abdelmouleh, M., Boufi, S., Belgacem, M.N., Gandini, A., Silane adsorption onto cellulose fibers: hydrolysis and condensation reactions. J Colloid Interface Sci 289 (2005), 249–261.
225. Cunha, A.G., Freire, C., Silvestre, A., Neto, C.P., Gandini, A., Belgacem, M.N., et al. Preparation of highly hydrophobic and lipophobic cellulose fibers by a straightforward gas–solid reaction. J Colloid Interface Sci 344 (2010), 588–595.
226. Castellano, M., Gandini, A., Fabbri, P., Belgacem, M.N., Modification of cellulose fibres with organosilanes: under what conditions does coupling occur?. J Colloid Interface Sci 273 (2004), 505–511.
227. Goussé C., Chanzy, H., Cerrada, M.L., Fleury, E., Surface silylation of cellulose microfibrils: preparation and rheological properties. Polymer 45 (2004), 1569–1575.
228. Andresen, M., Johansson, L.S., Tanem, B.S., Stenius, P., Properties and characterization of hydrophobized microfibrillated cellulose. Cellulose 13 (2006), 665–677.
229. Andresen, M., Stenius, P., Water‐in‐oil emulsions stabilized by hydrophobized microfibrillated cellulose. J Dispers Sci Technol 28 (2007), 837–844.
230. Johansson, L.S., Tammelin, T., Campbell, J.M., Setälä H., Österberg, M., Experimental evidence on medium driven cellulose surface adaptation demonstrated using nanofibrillated cellulose. Soft Matter 7 (2011), 10917–10924.
231. Chinga-Carrasco, G., Kuznetsova, N., Garaeva, M., Leirset, I., Galiullina, G., Kostochko, A., et al. Bleached and unbleached MFC nanobarriers: properties and hydrophobisation with hexamethyldisilazane. J Nanopart Res, 14, 2012 1280/1-10.
232. Qu, P., Zhou, Y., Zhang, X., Yao, S., Zhang, L., Surface modification of cellulose nanofibrils for poly(lactic acid) composite application. J Appl Polym Sci 125 (2012), 3084–3091.
233. Cherian, B.M., Leão, A.L., de Morais Chaves, M.R., de Souza, S.F., Sain, M., Narine, S.S., Environmental ageing studies of chemically modified micro and nanofibril phenol formaldehyde composites. Ind Crops Prod 49 (2013), 471–483.
234. Hokkanen, S., Repo, E., Suopajärvi, T., Liimatainen, H., Niinimaa, J., Sillanpää M., Adsorption of Ni(II), Cu(II) and Cd(II) from aqueous solutions by amino modified nanostructured microfibrillated cellulose. Cellulose 21 (2014), 1471–1487.
235. Hokkanen, S., Repo, E., Bhatnagar, A., Tang, W.Z., Sillanpää M., Adsorption of hydrogen sulphide from aqueous solutions using modified nano/micro fibrillated cellulose. Environ Technol 35 (2014), 2334–2346.
236. Ifuku, S., Yano, H., Effect of a silane coupling agent on the mechanical properties of a microfibrillated cellulose composite. Int J Biol Macromol 74 (2015), 428–432.
237. Yeo, J.S., Kim, O.Y., Hwang, S.H., The effect of chemical surface treatment on the fracture toughness of microfibrillated cellulose reinforced epoxy composites. J Ind Eng Chem 45 (2017), 301–306.
238. Lu, J., Askeland, P., Drzal, L.T., Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 49 (2008), 1285–1296.
239. Saini, S., Belgacem, M.N., Salon, M.C.B., Bras, J., Non leaching biomimetic antimicrobial surfaces via surface functionalisation of cellulose nanofibers with aminosilane. Cellulose 23 (2016), 795–810.
240. Saini, S., Belgacem, M.N., Bras, J., Effect of variable aminoalkyl chains on chemical grafting of cellulose nanofiber and their antimicrobial activity. Mater Sci Eng C 75 (2017), 760–768.
241. Hassanpour, A., Asghari, S., Lakouraj, M.M., Synthesis, characterization and antibacterial evaluation of nanofibrillated cellulose grafted by a novel quinolinium silane salt. RSC Adv 7 (2017), 23907–23916.
242. Peresin, M.S., Kammiovirta, K., Heikkinen, H., Johansson, L.S., Vartiainen, J., Setälä H., et al. Understanding the mechanisms of oxygen diffusion through surface functionalized nanocellulose films. Carbohydr Polym 174 (2017), 309–317.
243. Wang, L., Sanders, J.E., Gardner, D.G., Han, Y., In-situ modification of cellulose nanofibrils by organosilanes during spray drying. Ind Crops Prod 93 (2016), 129–135.
244. Virtanen, S., Jämsä S., Talja, R., Heikkinen, H., Vuoti, S., Chemically modified cellulose nanofibril as an additive for two-component polyurethane coatings. J Appl Polym Sci, 134, 2017 44801/1-14.
245. Missoum, K., Bras, J., Belgacem, M.N., Organization of aliphatic chains grafted on nanofibrillated cellulose and influence on final properties. Cellulose 19 (2012), 1957–1973.
246. Ruiz-Palomero, C., Soriano, M.L., Valcárcel, M., β-Cyclodextrin decorated nanocellulose: a smart approach towards the selective fluorimetric determination of danofloxacin in milk samples. Analyst 140 (2015), 3431–3438.
247. Miao, M., Zhao, J., Feng, X., Cao, Y., Cao, S., Zhao, Y., et al. Fast fabrication of transparent and multi-luminescent TEMPO-oxidized nanofibrillated cellulose nanopaper functionalized with lanthanide complexes. J Mater Chem C Mater Opt Electron Devices 3 (2015), 2511–2517.
248. Siqueira, G., Bras, J., Dufresne, A., New process of chemical grafting of cellulose nanoparticles with a long chain isocyanate. Langmuir 26 (2010), 402–411.
249. Missoum, K., Sadocco, P., Causio, J., Belgacem, M.N., Bras, J., Antibacterial activity and biodegradability assessment of chemically grafted nanofibrillated cellulose. Mater Sci Eng C 45 (2014), 477–483.
250. Navarro, J.R.G., Bergström, L., Labelling of N -hydroxysuccinimide-modified rhodamine B on cellulose nanofibrils by the amidation reaction. RSC Adv 4 (2014), 60757–60761.
251. Navarro, J.R.G., Conzatti, G., Yu, Y., Fall, A.B., Mathew, R., Edén, M., et al. Multicolor fluorescent labeling of cellulose nanofibrils by click chemistry. Biomacromolecules 16 (2015), 1293–1300.
252. Orelma, H., Filpponen, I., Johansson, L.S., Österberg, M., Rojas, O.J., Laine, J., Surface functionalized nanofibrillar cellulose (NFC) film as a platform for immunoassays and diagnostics. Biointerphases, 7, 2012 61/1-12.
253. Yang, R., Aubrecht, K.B., Ma, H., Wang, R., Grubbs, R.B., Hsiao, B.S., et al. Thiol-modified cellulose nanofibrous composite membranes for chromium (VI) and lead (II) adsorption. Polymer 55 (2014), 1167–1176.
254. Niu, Q., Gao, K., Wu, W., Cellulose nanofibril based graft conjugated polymer films act as a chemosensor for nitroaromatic. Carbohydr Polym 110 (2014), 47–52.
255. Saini, S., Quinot, D., Lavoine, N., Belgacem, M.N., Bras, J., β-Cyclodextrin-grafted TEMPO-oxidized cellulose nanofibers for sustained release of essential oil. J Mater Sci 52 (2017), 3849–3861.
256. Hassan, E.A., Hassan, M.L., Rice straw nanofibrillated cellulose films with antimicrobial properties via supramolecular route. Ind Crops Prod 93 (2016), 142–151.
257. Hollertz, R., Durán, V.L., Larsson, P.A., Wågberg, L., Chemically modified cellulose micro- and nanofibrils as paper-strength additives. Cellulose 24 (2017), 3883–3899.
258. Laitinen, O., Suopajärvi, T., Österberg, M., Liimatainen, H., Hydrophobic, superabsorbing aerogels from choline chloride-based deep eutectic solvent pretreated and silylated cellulose nanofibrils for selective oil removal. ACS Appl Mater Interfaces 9 (2017), 25029–25037.
259. Pahimanolis, N., Hippi, U., Johansson, L.S., Saarinen, T., Houbenov, N., Ruokolainen, J., et al. Surface functionalization of nanofibrillated cellulose using click-chemistry approach in aqueous media. Cellulose 18 (2011), 1201–1212.
260. Hettegger, H., Beaumont, M., Potthast, A., Rosenau, T., Aqueous modification of nano- and microfibrillar cellulose with a click synthon. ChemSusChem 9 (2016), 75–79.
261. Trovatti, E., Cunha, A.G., Carvalho, A.J.F., Gandini, A., Furan-modified natural rubber: a substrate for its reversible crosslinking and for clicking it onto nanocellulose. Int J Biol Macromol 95 (2017), 762–768.
262. Junka, K., Filpponen, I., Johansson, L.S., Kontturi, E., Rojas, O.J., Laine, J., A method for the heterogeneous modification of nanofibrillar cellulose in aqueous media. Carbohydr Polym 100 (2014), 107–115.
263. Gandini, A., Carvalho, A.J.F., Trovatti, E., Kramer, R.K., Lacerda, T.M., Macromolecular materials based on the application of the Diels–Alder reaction to natural polymers and plant oils. Eur J Lipid Sci Technol, 120, 2018 1700091/1-20.
264. Stenstad, P., Andresen, M., Tanem, B.S., Stenius, P., Chemical surface modifications of microfibrillated cellulose. Cellulose 15 (2008), 35–45.
265. Littunen, K., Hippi, U., Johansson, L.S., Österberg, M., Tammelin, T., Laine, J., et al. Free radical graft copolymerization of nanofibrillated cellulose with acrylic monomers. Carbohydr Polym 84 (2011), 1039–1047.
266. Navarro, J.R.G., Wennmalm, S., Godfrey, J., Breitholtz, M., Edlund, U., Luminescent nanocellulose platform: from controlled graft block copolymerization to biomarker sensing. Biomacromolecules 17 (2016), 1101–1109.
267. Lönnberg, H., Larsson, K., Lindström, T., Hult, A., Malmström, E., Synthesis of polycaprolactone-grafted microfibrillated cellulose for use in novel bionanocomposites–Influence of the graft length on the mechanical properties. ACS Appl Mater Interfaces 3 (2011), 1426–1433.
268. Silva, M.J., Sanches, A.O., Medeiros, E.S., Mattoso, L.H.C., McMahan, C.M., Malmonge, J.A., Nanocomposites of natural rubber and polyaniline-modified cellulose nanofibrils. J Therm Anal Calorim 117 (2014), 387–392.
269. Zhang, F., Wu, W., Zhang, X., Meng, X., Tong, G., Deng, Y., Temperature-sensitive poly-NIPAm modified cellulose nanofibril cryogel microspheres for controlled drug release. Cellulose 23 (2016), 415–425.
270. Morits, M., McKee, J., Majoinen, J., Malho, J.M., Houbenov, N., Seitsonen, J., et al. Polymer brushes on cellulose nanofibers: modification, SI-ATRP, and unexpected degradation processes. ACS Sustain Chem Eng 5 (2017), 7642–7650.
271. Zhang, F., Ren, H., Tong, G., Deng, Y., Ultra-lightweight poly (sodium acrylate) modified TEMPO-oxidized cellulose nanofibril aerogel spheres and their superabsorbent properties. Cellulose 23 (2016), 3665–3676.
272. Bideau, B., Bras, J., Saini, S., Daneault, C., Loranger, E., Mechanical and antibacterial properties of a nanocellulose-polypyrrole multilayer composite. Mater Sci Eng C 69 (2016), 977–984.
273. Tian, C., Fu, S.Y., Meng, Q.J., Lucia, L.A., New insights into the material chemistry of polycaprolactone-grafted cellulose nanofibrils/polyurethane nanocomposites. Cellulose 23 (2016), 2457–2473.
274. Li, S., Xiao, M., Zheng, A., Xiao, H., Cellulose microfibrils grafted with PBA via surface-initiated atom transfer radical polymerization for biocomposite reinforcement. Biomacromolecules 12 (2011), 3305–3312.
275. Mulyadi, A., Deng, Y., Surface modification of cellulose nanofibrils by maleated styrene block copolymer and their composite reinforcement application. Cellulose 23 (2016), 519–528.
276. Benkaddour, A., Jradi, K., Robert, S., Daneault, C., Study of the effect of grafting method on surface polarity of tempo-oxidized nanocellulose using polycaprolactone as the modifying compound: esterification versus click-chemistry. Nanomaterials 3 (2013), 638–654.
277. Barner-Kowollik, C., Du Prez, F.E., Espeel, P., Hawker, C.J., Junkers, T., Schlaad, H., et al. “Clicking” polymers or just efficient linking: what is the difference?. Angew Chem Int Ed 50 (2011), 60–62.
278. Fujisawa, S., Zhang, J., Saito, T., Iwata, T., Isogai, A., Cellulose nanofibrils as templates for the design of poly(l-lactide)-nucleating surfaces. Polymer 55 (2014), 2937–2942.
279. Barazzouk, S., Daneault, C., Tryptophan-based peptides grafted onto oxidized nanocellulose. Cellulose 19 (2012), 481–493.
280. Lavoine, N., Bras, J., Saito, T., Isogai, A., Optimization of preparation of thermally stable cellulose nanofibrils via heat-induced conversion of ionic bonds to amide bonds. J Polym Sci Part Polym Chem 55 (2017), 1750–1756.
281. Yeo, J.S., Hwang, S.H., Preparation and characteristics of polypropylene-graft-maleic anhydride anchored micro-fibriled cellulose: its composites with polypropylene. J Adhes Sci Technol 29 (2015), 185–194.
282. Bansal, M., Chauhan, G.S., Kaushik, A., Sharma, A., Extraction and functionalization of bagasse cellulose nanofibres to Schiff-base based antimicrobial membranes. Int J Biol Macromol 91 (2016), 887–894.
283. Zheng, X., Zhang, Q., Liu, J., Pei, Y., Tang, K., A unique high mechanical strength dialdehyde microfibrillated cellulose/gelatin composite hydrogel with a giant network structure. RSC Adv 6 (2016), 71999–72007.
284. Hoeng, F., Potential of nanocellulose fo conductive ink preparation. 2016, Communauté université Grenoble Alpes 276 pp.
285. Mousa, M.H., Dong, Y., Davies, I.J., Recent advances in bionanocomposites: preparation, properties, and applications. Int J Polym Mater Polym Biomater 65 (2016), 225–254.
286. Siró I., Plackett, D., Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17 (2010), 459–494.
287. Abdul Khalil, H.P.S., Davoudpour, Y., Saurabh, C.K., Hossain, M.S., Adnan, A.S., Dungani, R., et al. A review on nanocellulosic fibres as new material for sustainable packaging: process and applications. Renew Sustain Energy Rev 64 (2016), 823–836.
288. Azeredo, H.M.C., Rosa, M.F., Mattoso, L.H.C., Nanocellulose in bio-based food packaging applications. Ind Crops Prod 97 (2017), 664–671.
289. Boufi, S., González, I., Delgado-Aguilar, M., Tarrès, Q., Pèlach, M.À Mutjé P., Nanofibrillated cellulose as an additive in papermaking process: a review. Carbohydr Polym 154 (2016), 151–166.
290. Osong, S.H., Norgren, S., Engstrand, P., Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review. Cellulose 23 (2016), 93–123.
291. Dumanli, A.G., Nanocellulose and its composites for biomedical applications. Curr Med Chem 24 (2017), 512–528.
292. Xue, Y., Mou, Z., Xiao, H., Nanocellulose as a sustainable biomass material: structure, properties, present status and future prospects in biomedical applications. Nanoscale 9 (2017), 14758–14781.
293. Kaushik, M., Moores, A., Review: nanocelluloses as versatile supports for metal nanoparticles and their applications in catalysis. Green Chem 18 (2016), 622–637.
294. De France, K.J., Hoare, T., Cranston, E.D., Review of hydrogels and aerogels containing nanocellulose. Chem Mater 29 (2017), 4609–4631.
295. Hoeng, F., Denneulin, A., Krosnicki, G., Bras, J., Positive impact of cellulose nanofibrils on silver nanowire coatings for transparent conductive films. J Mater Chem C Mater Opt Electron Devices 4 (2016), 10945–10954.
296. Lahtinen, P., VTT is developing 3D-printing materials for wound care and decorative elements. 2017 (Accessed August 2018) https://www.vttresearch.com/media/news/vtt-is-developing-3d-printing-materials-for-wound-care-and-decorative-elements/.
297. Nguyen, D., Hägg, D.A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., et al. Cartilage tissue engineering by the 3D bioprinting of iPS cells in a Nanocellulose/Alginate bioink. Sci Rep, 7(658), 2017.
298. Tenhunen, T.M., Moslemian, O., Kammiovirta, K., Harlin, A., Kääriäinen, P., Österberg, M., et al. Surface tailoring and design-driven prototyping of fabrics with 3D-printing: an all-cellulose approach. Mater Des 140 (2018), 409–419.
299. Hjørnevik, M., Why should I use microfibrillated cellulose in coatings?. 2017 (Accessed July 2018) http://blog.exilva.com/why-should-i-use-microfibrillated-cellulose-in-coatings/.
300. Sharma, P.R., Zheng, B., Sharma, S.K., Zhan, C., Wang, R., Bhatia, S.R., Hsiao, B.S., High aspect ratio carboxycellulose nanofibers prepared by nitro-oxydation method and their nanopaper properties. ACS Appl. Nano Mater. 1:8 (2018), 3969–3980.