A comparative study of the properties of three nano-fibrillated cellulose systems that have been produced at about the same energy consumption levels in the mechanical delamination step

Nordic Pulp and Paper Research Journal

Volumn 31, Issue 3, 2016, Pages 364-371

  Naderi, Ali ^a   Lindström, Tom ^a   Erlandsson, Johan ^b   Sundström, Jonas ^a   Flodberg, Göran ^a  

^a INNVENTIA AB   (Sweden)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Barrier properties; Nanofibrillated cellulose (NFC); Rheology; Tensile strength properties

Indexed keywords

CELLULOSE; ENERGY UTILIZATION; RHEOLOGY; VISCOSITY;

BARRIER PROPERTIES; CARBOXYMETHYL CELLULOSE; CARBOXYMETHYLATED; COMPARATIVE STUDIES; ENERGY CONSUMPTION LEVELS; NANOFIBRILLATED CELLULOSE; NANOFIBRILLATED CELLULOSE (NFC); TENSILE STRENGTH PROPERTIES;

TENSILE STRENGTH;

BARRIER PROPERTIES; CARBOXYMETHYL CELLULOSE; CELLULOSE DERIVATIVES; ENERGY CONSUMPTION; VISCOSITY; RHEOLOGY; TENSILE STRENGTH;

EID: 84982095495     PISSN: 02832631     EISSN: 20000669     Source Type: Journal    
DOI: 10.3183/npprj-2016-31-03-p364-371     Document Type: Article

References (39)

1. Ankerfors, M. (2012): Microfibrillated cellulose: Energy-efficient preparation techniques and key properties, Licentiate thesis, KTH Royal Institute of Technology, Stockholm, Sweden
2. Aulin, C., Salazar-Alvarez, G. and Lindström, T. (2012): High strength, flexible and transparent nanofibrillated cellulose-nanoclayt biohybrid films with tunable oxygen and water vapor permeability, Nanoscale 4(20), 6622-6628.
3. Berglund, L. A. (2005): Cellulose-based nanocomposites Mohanty, A., Misra, M, and Drzal, L. (eds) (ed.), Natural fibres, biopolymers and biocomposites, Taylor & Francis, pp. 807-832.
4. Buscall, R. (2010): Letter to the editor: Wall slip in dispersion rheometry, J. Rheol. 54(6), 1177-1183.
5. Chinga-Carrasco, G. and Syverud, K. (2012): On the structure and oxygen transmission rate of biodegradable cellulose nanobarriers, Nanoscale Res. Lett. 7(1), 1-6.
6. Dufresne, A. (2013): Nanocellulose: a new ageless bionanomaterial, Mater. Today 16(6), 220-227.
7. Fall, A. B., Burman, A. and Wågberg, L. (2014): Cellulosic nanofibrils from eucalyptus, acacia and pine fibers, Nord. Pulp Pap. Res. J. 29(1), 176-184.
8. Henriksson, M., Henriksson, G., Berglund, L. A. and Lindström, T. (2007): An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers, Eur. Polym. J. 43(8), 3434-3441.
9. Herrick, F. W. (1983): Redispersible microfibrillated cellulose, vol. US Pat. 4, 481, 076, ITT Corp.
10. Hu, L., Zheng, G., Yao, J., Liu, N., Weil, B., Eskilsson, M., Karabulut, E., Ruan, Z., Fan, S., Bloking, J. T., McGehee, M. D., Wågberg, L. and Cui, Y. (2013): Transparent and conductive paper from nanocellulose fibers, Energy Environ. Sci. 6, 513-518.
11. Isogai, A., Saito, T. and Fukuzumi, H. (2011): TEMPO-oxidized cellulose nanofibers, Nanoscale 3(1), 71-85.
12. Iwamoto, S., Nakagaito, A. N. and Yano, H. (2007): Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites, Appl. Phys. A 89(2), 461-466.
13. Josset, S., Orsolini, P., Siqueira, G., Tejado, A., Tingaut, P. and Zimmermann, T. (2014): Energy consumption of the nanofibrillation of bleached pulp, wheat straw and cecycled newspaper through a grinding process, Nord. Pulp Pap. Res. J. 29(1), 167-175.
14. Katz, S., Beatson, R. P. and Scallan, A. M. (1984): The determination of strong and weak acidic groups in sulfite pulps, Sven. Papperstidn. 87, R48-R53.
15. Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. and Dorris, A. (2011): Nanocelluloses: A new family of nature-based materials, Angew. Chem., Int. Ed. 50(24), 5438-5466.
16. Koskinen, T., Gustafsson, H. and Teirfolk, J.-E. (2012): A method and an apparatus for adding an additive to a cement-like composition, WO2012143617A1, UPM-Kymmene Corporation, Finland.
17. Laine, J., Lindström, T., Nordmark, G. G. and Risinger, G. (2000): Studies on topochemical modification of cellulosic fibers. Part 1. Chemical conditions for the attachment of carboxymethyl cellulose onto fibers, Nord. Pulp Pap. Res. J. 15(5), 520-526.
18. Laine, J., Lindström, T., Nordmark, G. G. and Risinger, G. (2002): Studies on topochemical modification of cellulosic fibres. Part 2. The effect of carboxymethyl cellulose attachment on fibre swelling and paper strength, Nord. Pulp Pap. Res. J. 17(1), 50-56.
19. Lavoine, N., Desloges, I., Dufresne, A. and Bras, J. (2012): Microfibrillated cellulose - Its barrier properties and applications in cellulosic materials: A review, Carbohydr. Polym. 90, 735-764.
20. Lindström, T. (1992): Chemical factors affecting the behavior of fibers during papermaking, Nord. Pulp Pap. Res. J. 7(4), 181-192.
21. Lindström, T., Aulin, C., Naderi, A. and Ankerfors, M. (2014): Microfibrillated cellulose, Encyclopedia of polymer science and technology, John Wiley & Sons, Inc., pp. 1-34.
22. Lindström, T., Glad-Nordmark, G., Risinger, G. and Laine, J. (2001): Method for modifying cellulose-based fiber material, WO2001021890A1. pp. 15 pp.
23. Miyawaki, S., Katsukawa, S., Abe, H., Iijima, Y. and Isogai, A. (2010): Method for recovery/reuse of N-oxyl compound, WO2010116794A1, Nippon Paper Industries Co., Ltd., Japan.
24. Moon, R. J., Martini, A., Nairn, J., Simonsen, J. and Youngblood, J. (2011): Cellulose nanomaterials review: structure, properties and nanocomposites, Chem. Soc. Rev. 40(7), 3941-3994.
25. Naderi, A., Lindström, T. and Pettersson, T. (2014a): The state of carboxymethylated nanofibrils after homogenization-aided dilution from concentrated suspensions: a rheological perspective, Cellulose 21(4), 2357-2368.
26. Naderi, A., Lindström, T. and Sundström, J. (2014b): Carboxymethylated nanofibrillated cellulose: rheological studies, Cellulose 21(3), 1561-1571.
27. Naderi, A., Lindström, T. and Sundström, J. (2015a): Repeated homogenization, a route for decreasing the energy consumption in the manufacturing process of carboxy-methylated nanofibrillated cellulose?, Cellulose 22(2), 1147-1157.
28. Naderi, A., Lindström, T., Sundström, J. and Flodberg, G. (2015b): Can redispersible low-charged nanofibrillated cellulose be produced by the addition of carboxymethyl cellulose?, Nord. Pulp Pap. Res. J. 30(4), 568-577.
29. Naderi, A., Lindström, T., Sundström, J., Pettersson, T., Flodberg, G. and Erlandsson, J. (2015c): Microfluidized carboxymethyl cellulose modified pulp: a nanofibrillated cellulose system with some attractive properties, Cellulose 22(2), 1159-1173.
30. Naderi, A., Lindström, T., Weise, C. F., Flodberg, G., Sundström, J., Junel, K., Erlandsson, J. and Runebjörk, A. (2016): Phosphorylated nanofibrillated cellulose: production and properties, Nord. Pulp Pap. Res. J. 31(1), 22-31.
31. Nair, S. S., Zhu, J. Y., Deng, Y. and Ragauskas, A. (2014): Characterization of cellulose nanofibrillation by microgrinding, J. Nanopart. Res. 16(4), 2349.
32. Nechyporchuk, O., Belgacem, M. and Pignon, F. (2015): Concentration effect of TEMPO-oxidized nanofibrillated cellulose aqueous suspensions on the flow instabilities and small-angle X-ray scattering structural characterization, Cellulose, 22(4), 1-14.
33. Nuopponen, M., Kuutti, L. and Rovio, S. (2015): Method for recovering heterocyclic nitroxyl catalyst, WO2015086901A1, UPM-Kymmene Corporation, Finland.
34. Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O. and Lindström, T. (2007): Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels, Biomacromolecules 8(6), 1934-1941.
35. Siró, I., Plackett, D., Hedenqvist, M., Ankerfors, M. and Lindström, T. (2011): Highly transparent films from carboxymethylated microfibrillated cellulose: The effect of multiple homogenization steps on key properties, J. Appl. Polym. Sci. 119(5), 2652-2660.
36. Tanikoshi, H., Kamino, K., Mori, E., Goi, Y., Ikumi, Y., Noda, H. and Isogai, A. (2011): Manufacture of oxidized polysaccharides with good recovery of N-oxyl catalysts, JP2011116865A, Daiichi Kogyo Seiyaku Co., Ltd., Japan.
37. Turbak, A. F., Snyder, F. W. and Sandberg, K. R. (1983): Suspensions containing microfibrillated cellulose, US4, 378, 381, ITT Corp.
38. Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M. and Axnäs, K. (2008): The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes, Langmuir 24(3), 784-795.
39. Wernersson Brodin, F., Weiby Gregersen, Ø. and Syverud, K. (2014): Cellulose nanofibrils: Challenges and possibilities as a paper additive or coating material - A review, Nord. Pulp Pap. Res. J. 29(1), 156-166.