High Cycle Fatigue

High Cycle Fatigue

Volumn , Issue , 2006, Pages

  Nicholas, Theodore ^a  

^a AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85014132093     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-044691-2.X5000-0     Document Type: Book

References (383)

1. Wöhler A. Über die Festigkeits Versuche mit Eisen und Stahl. Zeitschrift für Bauwesen 1870, 20:73-106. [On Strength Tests of Iron and Steel].
2. Schütz W. A History of Fatigue. Engng Fract. Mech. 1996, 54:263-300.
3. Crouch J.O. Air Force Turbine Engine Reliability. presented at the NAS Committee of National Statistics Sponsored Reliability Workshop 9-10 June 2000.
4. Engine Structural Integrity Program (ENSIP), MIL-HDBK-1783B (USAF) 15 February 2002.
5. Engine Structural Integrity Program (ENSIP), MIL-STD-1783 (USAF) 30 November 1984.
6. John R., Nicholas T., Lackey A.F., Porter W.J. Mixed Mode Crack Growth in a Single Crystal Ni-Base Superalloy. Fatigue 96 1996, Vol. I:399-404. Elsevier Science Ltd, Oxford. G. Lütjering, H. Nowack (Eds.).
7. Grandt A.F. Fundamentals of Structural Integrity 2004, John Wiley & Sons, Inc., Hoboken, NJ.
8. Greenfield P., Suhr R.W. The Factors Affecting the High Cycle Fatigue Strength of Low Pressure Turbine and Generator Rotors. GEC Review 1987, 3(No. 3):171-179.
9. Hawkyard M., Powell B.E., Husey I., Grabowski L. Fatigue Crack Growth under Conjoint Action of Major and Minor Stress. Fatigue Fract. Eng. Mater. Struct. 1996, 19:217-227.
10. Barenblatt G.I. On a Model of Small Fatigue Cracks. Eng. Fract. Mech. 1987, 28:623-626.
11. Miller K.J. The Short Crack Problem. Fatigue Engng Mater. Struct. 1982, 5:223-232.
12. Lankford J. The Influence of Microstructure on the Growth of Small Fatigue Cracks. Fatigue Engng Mater. Struct. 1985, 8:161-175.
13. Sir Arthur Conan Doyle The Sign of Four 1890.
14. Wöhler A. Bericht über die Versuche, welche auf der Königl. Niederschlesisch-Märkischen Eisenbahn mit Apparaten zum Messen der Biegung und Verdrehung von Eisenbahn-wagen-Achsen während der Fahrt, angestellt wurden. Zeitschrift fur Bauwwesen 1858, 8:642-651.
15. Bathias C., Drouillac L., Le Francois P. How and Why the Fatigue S-N Curve does not Approach a Horizontal Asymptote. Int. J. Fatigue 2001, 23(Suppl. 1):S143-S151.
16. Bathias C. There is no Infinite Fatigue Life in Metallic Materials. Fatigue & Fracture of Engineering Materials & Structures 1999, 22:559-565.
17. Bathias C. Relation Between Endurance Limits and Thresholds in the Field of Gigacycle Fatigue. Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372 2000, 135-154. American Society for Testing and Materials, West Conshohocken, PA.
18. Marines I., Bin X., Bathias C. An Understanding of Very High Cycle Fatigue of Metals. Int. J. Fatigue 2003, 25:1101-1107.
19. Atrens A., Hoffelner W., Duerig T.W., Allison J.E. Subsurface Crack Initiation in High Cycle fatigue in Ti6Al4V and in a Typical Martensitic Stainless Steel. Scripta Met. 1983, 17:601-606.
20. Shiozawa K., Lu L., Ishihara S. S-N Curve Characteristics and Subsurface Crack Initiation Behaviour in Ultra-Long Life Fatigue of a High Carbon-Chromium Bearing Steel. Fatigue Fract. Engng Mater. Struct. 2001, 24:781-790.
21. Li J., Yao M., Wang R.Z. A New Concept for Fatigue Strength Evaluation of Shot Peened Specimens. Proceedings of the ICSP4, 4th International Conference on Shot Peening 1990, 255-262.
22. Morrissey R.J., Nicholas T. Staircase Testing of Titanium in the Gigacycle Regime. presented at 3rd International Conference on Very High Cycle Fatigue (VHCF-3) September 16-19, 2004, (to be published in Int. J. Fatigue), Ritsumeikan University, Shiga, Japan.
23. Ochi Y., Matsumura T., Masaki K., Yoshida S. High-Cycle Rotating Bending Fatigue Property in Very Long-Life Regime of High-Strength Steels. Fatigue Fract. Engng. Mater. Struct. 2002, 25:823-830.
24. Fatigue and Fracture of Engineering Materials and Structures 1999, 22(No. 7).
25. Fatigue and Fracture of Engineering Materials and Structures 2002, 25(No. 8/9).
26. Bathias C., Paris P.C. Gigacycle Fatigue in Mechanical Practice 2005, Marcel Dekker, New York.
27. Caton M.J., Jones J.W., Mayer H., Stanzl-Tschegg S., Allison J.E. Demonstration of an Endurance Limit in Cast 319 Aluminum. Metal. Mater. Trans. 2003, 34A:33-41.
28. Forrest P.G. Fatigue of Metals 1962, (U.S.A. Edition distributed by Addison-Wesley Publishing Co., Reading, MA), Pergamon Press, Oxford.
29. Gunn K. Effect of Yielding on the Fatigue Properties of Test Pieces Containing Stress Concentrations. Aeronautical Quarterly 1955, 6:277-294.
30. Murakami Y. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions 2002, Elsevier Science, Ltd., Kidlington, Oxford.
31. Sendeckyj G.P. Constant Life Diagrams-A Historical Review. Int. J. Fatigue 2001, 23:347-353.
32. Haigh B.P. Experiments on the Fatigue of Brasses. Journal of the Institute of Metals 1917, 18:55-86.
33. Goodman J. Mechanics Applied to Engineering 1930, Vol. 1:634. see also, Longmans, Green & Co., Inc., New York. 9th edn.
34. Goodman J. Mechanics Applied to Engineering 1899, Vol. 1:455. Longmans, Green & Co., Inc., New York. 1st edn.
35. Fidler T.C. A Practical Treatise on Bridge-Construction 1887, Charles Griffin and Company, London.
36. Soderberg C.R. Factor of Safety and Working Stress. Trans., American Society of Mechanical Engineers 1939, 52:13-28.
37. Gerber W.Z. Relation Between the Superior and Inferior Stresses of a Cycle of Limiting Stress (in German). Zeitschrift des Bayerischen Architekten-und Ingenieur-Vereins 1874, 6:101-110.
38. Launhardt W. The Stressing of Iron (in German). Zeitschrift des Architekten-und Ingenieur-Vereins zu Hannover 1873, 19:139-144.
39. Weyrauch J.J. Strength and Determination of the Dimensions of Structures of Iron and Steel with Reference to the Latest Investigations 1877, (English translation by A.J. DuBois), John Wiley and Sons, New York.
40. Smith R.H. The Strength of Railway Bridges. Engineering, London 1880, 29:262-263.
41. Gallagher J., et al. Advanced High Cycle Fatigue (HCF) Life Assurance Methodologies. Report # AFRL-ML-WP-TR-2005-4102 July 2004, Air Force Research Laboratory, Wright-Patterson AFB, OH.
42. Smith K.N., Watson R., Topper T.H. A Stress-Strain Function for the Fatigue of Metals. Journal of Materials 1970, 5:767-778.
43. Nicholas T., Maxwell D.C. Mean Stress Effects on the High Cycle Fatigue Limit Stress in Ti-6Al-4V. Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417 2002, 476-492. American Society for Testing and Materials, West Conshohocken, PA. W.G. Reuter, R.S. Piascik (Eds.).
44. Haigh B.P. The Relative Safety of Mild and High-Tensile Alloy Steels Under Alternating and Pulsating Stresses. Proceedings of the Institution of Automotive Engineers 1930, 24:320-347.
45. Heywood R.B. Designing Against Fatigue of Metals 1962, Reinhold Publishing Corp., New York.
46. Jasper T.M. The Value of the Energy Relation in the Testing of Ferrous Metals at Varying Ranges of Stress and at Intermediate and High Temperatures. Philosophical Magazine, Series. 6 October 1923, 46:609-627.
47. Maxwell D.C., Nicholas T. A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue. Fatigue and Fracture Mechanics: 29th Volume, ASTM STP 1321 1999, 626-641. American Society for Testing and Materials, West Conshohocken, PA. T.L. Panontin, S.D. Sheppard (Eds.).
48. Nicholas T. Material Behavior at High Strain Rates. Impact Dynamics, Chap. 8 1982, 277-332. Wiley, New York. J. Zukas (Ed.).
49. Moshier M.A., Nicholas T., Hillberry B.M. High Cycle Fatigue Threshold in the Presence of Naturally Initiated Small Surface Cracks. Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417 2002, 129-146. American Society for Testing and Materials, West Conshohocken, PA. W.G. Reuter, R.S. Piascik (Eds.).
50. Stephens R.I., Chen D.K., Hom B.W. Fatigue Crack Growth with Negative Stress Ratio Following Single Overloads in 2024-T3 and 7075-T6 Aluminum Alloys. Fatigue Crack Growth Under Spectrum Loads, ASTM STP 595 1976, 27-40. American Society for Testing and Materials, Philadelphia.
51. Lang M., Huang X. The Influence of Compressive Loads on Fatigue Crack Propagation in Metals. Fatigue Fract. Engng. Mater. Struct. 1998, 21:65-83.
52. Lenets Y.N. Compression Fatigue Crack Growth Behaviour of an Aluminium Alloy: Effect of Overloading. Fatigue Fract. Engng. Mater. Struct. 1997, 20:229-256.
53. Frost N.E., Dugdale D.S. Fatigue Tests on Notched Mild Steel Plates with Measurements of Fatigue Cracks. J. Mech. Phys. Solids 1957, 5:182-192.
54. Morgan J.M., Milligan W.W. A 1 kHz Servohydraulic Testing System. High Cycle Fatigue of Structural Materials 1997, 305-312. The Minerals, Metals & Materials Society. W.O. Soboyejo, T.S. Srivatsan (Eds.).
55. Mayer H. Fatigue Crack Growth and Threshold Measurements at Very High Frequencies. International Materials Reviews 1999, 44(1):1-34.
56. Marines I., Dominguez G., Baudry G., Vittori J.F., Rathery S., Doucet J.-P., Bathias C. Ultrasonic Fatigue Tests on Bearing Steel AISI-SAE 52100 at Frequency of 20 and 30 kHz. Int. J. Fatigue 2003, 25:1037-1046.
57. Gough H.J. The Fatigue of Metals 1926, Ernst Benn Limited, London.
58. Smith J.H. Some Experiments on Fatigue of Metals. Jour. Iron and Steel Inst. 1910, (Pt. II).
59. Moore H.F., Jasper T.M. An Investigation of the Fatigue of Metals. Bulleting No. 136 1924, Eng. Expt. Stat., Univ., Illinois, Urbana.
60. Schütz W. A History of Fatigue. Engineering Fracture Mechanics 1996, 54:263-300.
61. Ransom J.T., Mehl R.F. The Statistical Nature of the Endurance Limit. Metals Trans. 1949, 185:364-365.
62. Epremian E., Mehl R.F. Investigation of Statistical Nature of Fatigue Properties. NACA-TN-2719 June 1952.
63. Sinclair G.M. An Investigation of the Coaxing Effect in Fatigue of Metals. ASTM Proceedings 1952, 52:743-758.
64. Forsyth P.J.E. The Physical Basis of Metal Fatigue 1969, Blackie & Son Ltd, London.
65. Maennig W.W. Planning and Evaluation of Fatigue Tests. ASM Handbook 1996, Volume 19:303-313. Fatigue and Fracture, ASM International, Materials Park.
66. Moore H.F., Wishart H.B. An 'Overnight' Test for Determining Endurance Limit. Proc. ASTM 1933, 33(Part II):334-347.
67. Prot M. Un Nouveau Type de Machine D'Essai des Metaux a la Fatigue par Flexion Rotative. Rev. Metall. 1937, 34:440. see also.
68. Prot M. Fatigue Tests Under Progressive Load. A New Technique for Testing Materials. Rev. Métall. December 1948, 45(12):481-489.
69. Ward E.J., Schwartz R.T., Schwartz D.C. An Investigation of the Prot Accelerated Fatigue Test. Proc. ASTM 1953, 53:885-891.
70. Corten H.T., Dimoff T., Dolan T.J. An Appraisal of the Prot Accelerated Fatigue Test. Proc. ASTM 1954, 54:875-894.
71. Dolan T.J., Richart F.E., Work C.E. The Influence of Fluctuations in Stress Amplitude on the Fatigue of Metals. Proceedings ASTM 1953, 49:646.
72. Hempel M. Performance of Steel under Repeated Loading. Fatigue in Aircraft Structures 1956, 83-103. Academic Press, New York. A.M. Freudenthal (Ed.).
73. Epremian E., Mehl R.F. A Statistical Interpretation of the Effect of Understressing on Fatigue Strength. Fatigue with Emphasis on Statistical Approach. ASTM STP 137 1952, 58-69. American Society for Testing and Materials.
74. Vitovec F.H., Lazan B.J. Strength, Damping and Elasticity of Materials Under Increasing Reversed Stress with Reference to Accelerated Fatigue Testing. Proc. ASTM 1955, 55:844-862.
75. Nicholas T., Maxwell D.C. Evolution and Effects of Damage in Ti-6Al-4V under High Cycle Fatigue. ICM-8 1999, Vol. III:1161-1166. F. Ellyin, J.W. Provan (Eds.).
76. Maxwell D.C., Nicholas T. A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue. Fatigue and Fracture Mechanics: 29th Volume, ASTM STP 1321 1999, 626-641. American Society for Testing and Materials, West Conshohocken, PA. T.L. Panontin, S.D. Sheppard (Eds.).
77. Gallagher J.P., et al. Improved High Cycle Fatigue Life Prediction. Report # AFRL-ML-WP-TR-2001-4159 January, 2001, (on CD ROM), University of Dayton Research Institute, Dayton, OH.
78. Gallagher J., et al. Advanced High Cycle Fatigue (HCF) Life Assurance Methodologies. Report #AFRL-ML-WP-TR-2005-4102 July 2004, Air Force Research Laboratory, Wright-Patterson AFB, OH.
79. Ruschau J.J., Nicholas T., Thompson S.R. Influence of Foreign Object Damage (FOD) on Fatigue Life of Simulated Ti-6Al-4V Airfoils. Int. Jour. Impact Engng. 2001, 25:233-250.
80. Bellows R.S., Muju S., Nicholas T. Validation of the Step Test Method for Generating Haigh Diagrams for Ti-6Al-4V. Int. J. Fatigue 1999, 21:687-697.
81. Bathias C. Relation Between Endurance Limits and Thresholds in the Field of Gigacycle Fatigue. Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372 2000, 135-154. American Society for Testing and Materials, West Conshohocken, PA.
82. Bellows R.S., Bain K.R., Sheldon J.W. Effect of Step Testing and Notches on the Endurance Limit of Ti-6Al-4V. Mechanical Behavior of Advanced Materials, MD-Vol. 84 1998, 27. ASME, New York. D.C. Davis (Ed.).
83. Morrissey R.J., McDowell D.L., Nicholas T. Frequency and Stress Ratio Effects in High Cycle Fatigue of Ti-6Al-4V. Int. J. Fatigue 1999, 21:679-685.
84. Moshier M.A., Hillberry B.M., Nicholas T. The Effect of Low-Cycle Fatigue Cracks and Loading History on the High Cycle Fatigue Threshold. Fatigue and Fracture Mechanics: 31st Volume, ASTM STP 1389 2000, 427-444. American Society for Testing and Materials, West Conshohocken, PA. G.R. Halford, J.P. Gallagher (Eds.).
85. Golden P.J., Bartha B.B., Grandt A.F., Nicholas T. Measurement of the Fatigue Crack Propagation Threshold of Fretting Cracks in Ti-6Al-4V. Int. J. Fatigue 2004, 26:281-288.
86. Caton M.J. Predicting Fatigue Properties of Cast Aluminum by Characterizing Small-Crack Propagation Behavior. PhD Dissertation 2001, University of Michigan.
87. Nicholas T. Step Loading for Very High Cycle Fatigue. Fatigue Fract. Engng. Mater. Struct. 2002, 25:861-869.
88. Lin S.K., Lee Y.L., Lu M.W. Evaluation of the Staircase and the Accelerated Test Methods for Fatigue Limit Distributions. Int. J. Fatigue 2001, 23:75-83.
89. Dixon W.J., Mood A.M. A Method for Obtaining and Analyzing Sensitivity Data. J. Amer. Stat. Assn. 1948, 43:109-126.
90. Finney D.J. Probit Analysis 1971, Cambridge University Press. 3rd ed.
91. Fisher R.A. Statistical Methods for Research Workers 1969, Oliver and Boyd Ltd, Edinburgh. 14th Edition.
92. A Guide for Fatigue Testing and the Statistical Analysis of Fatigue Data, ASTM STP 91-A 1963, 12-13. American Society for Testing and Materials. 2nd ed.
93. Braam J.J., van der Zwaag S. A Statistical Evaluation of the Staircase and the ArcSin√P Methods for Determining the Fatigue Limit. Journal of Testing and Evaluation, JTE VA 1998, 26:125-131.
94. Davoli P., Bernasconi A., Filippini M., Foletti S., Papadopoulos I.V. Independence of the Torsional Fatigue Limit Upon a Mean Shear Stress. Int. J. Fatigue 2003, 25:471-480.
95. Little R.E., Jebe E.H. Statistical Design of Fatigue Experiments 1975.
96. Brownlee K.A., Hodges J.L., Rosenblatt M. The Up-and-Down Method with Small Samples. J. Amer. Stat. Assn. 1953, 48:262-277.
97. Dixon W.J. The Up-and-Down Method for Small Samples. J. Amer. Stat. Assn. 1965, 60:967-978.
98. Efron B., Tibshirani R.J. An Introduction to the Bootstrap 1993, Chapman and Hall, New York.
99. Morrissey R.J., Nicholas T. Staircase Testing of Titanium in the Gigacycle Regime. presented at 3rd International Conference on Very High Cycle Fatigue (VHCF-3) 16-19 September 2004.
100. Pascual, Meeker Estimating Fatigue Curves with the Random Fatigue-Limit Model. Technometrics November 1999, 41(No. 4):277-302. with comments.
101. MIL-HDBK-5G, Metallic Materials and Elements for Aerospace Vehicle Structures 1 November 1994, 2:9-100.
102. Berens A.P., Annis C. Characterizing Fatigue Limits for Haigh Diagrams. Proceedings of the 5th National Turbine Engine High Cycle Fatigue Conference 7-9 March 2000, (see also [24 Appendix B]).
103. Meeker W.Q., Escobar L.A. Statistical Methods for Reliability Data 1998, John Wiley & Sons, New York.
104. Annis C., Griffiths J. Staircase Testing and the Random Fatigue Limit. Proceedings of the 6th National Turbine Engine High Cycle Fatigue Conference 6-8 March 2001.
105. Smith K.N., Watson P., Topper T.H. A Stress-Strain Function for the Fatigue of Metals. Journal of Materials, JMLSA December 1970, 5(No. 4):767-778.
106. Doner M., Bain K.R., Adams J.H. Evaluation of Methods for the Treatment of Mean Stress Effects on Low-Cycle Fatigue. Journal of Engineering for Power 1981, 1-9.
107. Loren S. Fatigue Limit Estimated using Finite Lives. Fatigue Fract. Engng. Mater. Struct. 2003, 26:757-766.
108. ASTM E739-91, Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e-N) Fatigue Data 1998.
109. Beretta S., Clericic P., Matteazzi S. The Effect of Sample Size on the Confidence of Endurance Fatigue Tests. Fatigue Fract. Engng. Mater. Struct. 1995, 18:129-139.
110. Nelson W. Fitting of Fatigue Curves with Nonconstant Standard Deviation to Data with Run-outs. Journal of Testing and Evaluation, JTEVA 1984, 12:69-77.
111. Nelson W. Accelerated Testing: Statistical Models, Test Plans, and Data Analyses 1990, John Wiley & Sons, New York.
112. Berens, A., University of Dayton Research Institute, 2004, private communication.
113. George T.J., Seidt J., Shen M.H.H., Nicholas T., Cross C.J. Development of a Novel Vibration-Based Fatigue Testing Methodology. Int. J. Fatigue 2004, 26:477-486.
114. Sendeckyj G.P. Bibliography on the History of Fatigue 1997, (unpublished), Air Force Research Laboratory, Materials Directorate.
115. Bernhard R.K. Testing Materials in the Resonance Range. Proc. ASTM 1941, 41:747-757.
116. Nowack H. "Fatigue Test Machines", Fatigue Test Methodology. AGARD Lecture Series No. 118 October 1981, 3. North Atlantic Treaty Organization.
117. Memmler K., Laute K. Dauerversuche an der Hochfrequenz-Zuf-Druck-Maschine, Bauert-Schenck. Forschungsarbeiten a. d. Gebiete d. Ingenieur-wesens 1930, (No. 329):32. Abstract.
118. Memmler K., Laute K. Dauerversuche an der Hochfrequenz-Zuf-Druck-Maschine, Bauert-Schenck. Z. Ver. dtsch. Ing 8 February, 1930, 74:189-190.
119. Memmeler K., Laute K. Dauerversuche an der Hochfrequenz-Zuf-Druck-Maschine, Bauert-Schenck. Z. Metallk. 1930 July, 22:249-250.
120. Herzog A. Six ton Schenck Fatigue Testing Machine. Tech. Rep. U.S. Army Air Force 15 August, 1947, (No. 5623):24.
121. Rawlins R.E. Fatigue Tests at Resonant Speed. Metal Prog. 1947, 47:265-267.
122. Fehr R.O., Schabtach C. Resonant Vibration Testing. Steel 1941, 109:64-65.
123. Fehr R.O., Schabtach C. Resonant Vibration Testing. Steel 1941, 109:96.
124. Fehr R.O., Schabtach C. Resonant Vibration Testing. Steel 1941, 109:102.
125. Symposium on Large Fatigue Testing Machines and Their Results. ASTM STP 216 1958, American Society for Testing and Materials, Philadelphia.
126. Fairbairn W. Experiments to Determine the Effect of Impact Vibratory and Long-Continued Changes of Load on Wrought-Iron Girders. Phil. Trans. Roy. Soc., London 1864, 154:311-326.
127. Morrissey R.J., Golden P., Nicholas T. The Effect of Stress Transients on the HCF Endurance Limit. Int. J. Fatigue 2003, 25:1125-1133.
128. Nicholas T. Material Behavior at High Strain Rates. Impact Dynamics, Chapter 8 1982, 277-332. Wiley, New York. J. Zukas (Ed.).
129. Lomas T.W., Ward J.O., Rait J.R., Colbeck E.W. The Influence of Frequency of Vibration on the Endurance Limit of Ferrous Alloys at Speeds up to 150,000 Cycles per Minute Using a Pneumatic Resonance System. Proceedings of the International Conference on Fatigue of Metals 1956, 375-385.
130. Jenkin C.F. High Frequency Fatigue Tests. Proc. Roy. Soc., A 1925, 109:119-143.
131. Jenkin C.F., Lehmann G.D. High Frequency Fatigue. Proc. Roy. Soc., A 1929, 125:83-119.
132. Collins J. Failure of Materials in Mechanical Design 1993, 224. John Wiley and Sons, New York.
133. Morrissey R.J., Nicholas T. Fatigue Strength of Ti-6Al-4V at Very Long Lives. Int. J. Fatigue 2005, 27.
134. Nicholas T. Step Loading, Coaxing and Small Crack Thresholds in Ti-6Al-4V under High Cycle Fatigue. Fatigue-David L. Davidson Symposium 2002, 91-106. TMS (The Minerals, Metals & Materials Society), Warrendale, PA. K.S. Chan, P.K. Liaw, R.S. Bellows, T.C. Zogas, W.O. Soboyejo (Eds.).
135. Kitagawa H., Takahashi S. Applicability of Fracture Mechanics to Very Small Cracks or the Cracks in the Early Stage. Proc. of Second International Conference on Mechanical Behaviour of Materials 1976, 627-631.
136. El Haddad M.H., Smith K.N., Topper T.H. Fatigue Crack Propagation of Short Cracks. Journal of Engineering Materials and Technology 1979, 101:42-46.
137. Moshier M.A., Nicholas T., Hillberry B.M. High Cycle Fatigue Threshold in the Presence of Naturally Initiated Small Surface Cracks. Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417 2002, 129-146. American Society for Testing and Materials, West Conshohocken, PA. W.G. Reuter, R.S. Piascik (Eds.).
138. Chan K.S., Davidson D.L., Lee Y.D., Hudak S.J. A Fracture Mechanics Approach to High Cycle Fretting Fatigue Based on The Worst Case Fret Concept: Part I-Model Development. International Journal of Fracture 2001, 112:299-330.
139. Moshier M.A., Nicholas T., Hillberry B.M. Load History Effects on Fatigue Crack Growth Threshold for Ti-6Al-4V and Ti-17 Titanium Alloys. Int. J. Fatigue 2001, 23(Supp. 1):253-258.
140. Hutson A.L., Neslen C., Nicholas T. Characterization of Fretting Fatigue Crack Initiation Processes in Ti-6Al-4V. Tribology International 2003, 36:133-143.
141. Lanning D., Haritos G.K., Nicholas T., Maxwell D.C. Low-Cycle Fatigue/High-Cycle Fatigue Interactions in Notched Ti-6Al-4V. Fatigue Fract. Engng. Mater. Struct. 2001, 24:565-578.
142. Moshier M.A., Hillberry B.M., Nicholas T. The Effect of Low-Cycle Fatigue Cracks and Loading History on the High Cycle Fatigue Threshold. Fatigue and Fracture Mechanics: 31st Volume, ASTM STP 1389 2000, 427-444. American Society for Testing and Materials, West Conshohocken, PA. G.R. Halford, J.P. Gallagher (Eds.).
143. Caton M.J. Predicting Fatigue Properties of Cast Aluminum by Characterizing Small-Crack Propagation Behavior. PhD Dissertation 2001, University of Michigan.
144. Nicholas T. Recent Advances in High Cycle Fatigue. Proceedings of 9th International Conference on the Mechanical Behaviour of Materials 25-29 May 2003, (on CD-ROM).
145. Maxwell D.C., Nicholas T. A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue. Fatigue and Fracture Mechanics: 29th Volume, ASTM STP 1321 1999, 626-641. American Society for Testing and Materials, West Conshohocken, PA. T.L. Panontin, S.D. Sheppard (Eds.).
146. Nicholas T. Step Loading for Very High Cycle Fatigue. Fatigue Fract. Engng. Mater. Struct. 2002, 25:861-869.
147. Mall S., Nicholas T., Park T.-W. Effect of Pre-Damage from Low Cycle Fatigue on High Cycle Fatigue Strength of Ti-6Al-4V. Int. J. Fatigue 2003, 25:1109-1116.
148. Morrissey R.J., Golden P., Nicholas T. The Effect of Stress Transients on the HCF Endurance Limit in Ti-6Al-4V. Int. J. Fatigue 2003, 25:1125-1133.
149. Morrissey R.J., McDowell D.L., Nicholas T. Frequency and Stress Ratio Effects in High Cycle Fatigue of Ti-6Al-4V. Int. J. Fatigue 1999, 21:679-685.
150. Forman R.G., Shivakumar V. Growth Behavior of Surface Cracks in the Circumferential Plane of Solid and Hollow Cylinders. Fracture Mechanics: Sevententh Volume, ASTM STP 905 1986, 59-74. ASTM, Philadelphia. J.H. Underwood, R. Chait, C.W. Smith, D.P. Wilhem, W.A. Andrews, J.C. Newman (Eds.).
151. Gallagher J.P., et al. Improved High Cycle Fatigue Life Prediction. Report # AFRL-ML-WP-TR-2001-4159 January 2001, (on CD ROM), University of Dayton Research Institute, Dayton, OH.
152. Golden P.J., Bartha B.B., Grandt A.F., Nicholas T. Measurement of the Fatigue Crack Propagation Threshold of Fretting Cracks in Ti-6Al-4V. Int. J. Fatigue 2004, 26:281-288.
153. Shen G., Glinka G. Weight Functions for a Surface Semi-Elliptical Crack in a Finite Thickness Plate. Theor. Appl. Fract. Mech. 1991, 15:247-255.
154. Kommers J.B. Discussion of paper "Fatigue Failure from Stress Cycles of Varying Amplitude" by B.F. Langer. J. Appl Mech. 1938, A-180.
155. Nicholas T., Maxwell D.C. Evolution and Effects of Damage in Ti-6Al-4V under High Cycle Fatigue. Proceedings of the Eighth International Conference on the Mechanical Behaviour of Materials, ICM-8 1999, Vol. III:1161-1166. F. Ellyin, J.W. Provan (Eds.).
156. Walls D.P., deLaneuville R.E., Cunningham S.E. Damage Tolerance Based Life Prediction in Gas Turbine Engine Blades under Vibratory High Cycle Fatigue. Journal of Engineering for Gas Turbines and Power-Transactions ASME 1997, 119:143-146.
157. Akita K., Misawa H., Tobe S., Kodama S. Fatigue Crack Propagation Behavior of Ti-6Al-4V Alloy under Simplified Loading with a Single Overload. Fatigue '93 1993, 3:1575-1580. EMAS, Warley UK. J.P. Bailon, J.I. Diskson (Eds.).
158. th in Ti-6Al-4V at Room Temperature. Int. J. Fatigue 1999, 21:733-741.
159. Lenets Y.N., Nicholas T. Load History Dependence of Fatigue Crack Thresholds for Ti-Alloy. Engineering Fracture Mechanics 1998, 60:187-203.
160. Makhutov N., Romanov A., Gadenin M. High-Temperature Low-Cycle Fatigue Resistance Under Superimposed Stresses at Two Frequencies. Fatigue Engng Mater. Struct. 1979, 1:281-285.
161. Zaitsev G.Z., Faradzhov R.M. Metallovedenie i Termicheskaya Obrabotka 1970, 2:44-46.
162. Ouyang J., Wang Z., Song D., Yan M. Influence of High Frequency Vibrations on the Low Cycle Fatigue Behavior of a Superalloy at Elevated Temperature. Low Cycle Fatigue, ASTM STP 942 1988, 961-971. American Society for Testing and Materials, Philadelphia, PA.
163. Goodman R.C., Brown A.M. High Frequency Fatigue of Turbine Blade Material. AFWAL-TR-82-4151 October 1982, Wright-Patterson AFB, OH.
164. Guedou J.Y., Rongvaux J.M. Effect of Superimposed Stresses at High Frequency on Low Cycle Fatigue. Low Cycle Fatigue, ASTM STP 942 1988, 938-960. American Society for Testing and Materials, Philadelphia, PA.
165. Powell B.E., Duggan T.V., Jeal R. The Influence of Minor Cycles on Low Cycle Fatigue Crack Propagation. Int. J. Fatigue 1982, 4:4-14.
166. Powell B.E., Henderson I., Duggan T.V. The Effect of Combined Major and Minor Stress Cycles on Fatigue Crack Growth. Second International Congress on Fatigue (Fratigue '84) 1984, 893-902.
167. Hawkyard M., Powell B.E., Hussey I., Grabowski L. Fatigue Crack Growth under Conjoint Action of Major and Minor Stress. Fatigue & Fracture of Engineering Materials & Structures 1996, 19:217-227.
168. Hall R.F., Powell B.E. The Effects of LCF Loadings on HCF Crack Growth. US AFOSR Annual Report for Phase II, Report Number F567 May 1999, University of Portsmouth, England.
169. Probst E.P., Hillberry B.M. Fatigue Crack Delays and Arrest due to Single Peak Tensile Overloads. AIAA Paper No. 73-325 1973, see also.
170. Probst E.P., Hillberry B.M. Fatigue Crack Delays and Arrest due to Single Peak Tensile Overloads. AIAA Journal 1974, 12:330-335.
171. Petrak G.J., Gallagher J.P. Predictions of the Effect of Yield Strength on Fatigue Crack Growth Retardation in HP-9Ni-4Co-30C Steel. Journal of Engineering Materials and Technology 1975, 97:206-213.
172. Gallagher J.P., Stalnacker H.D. Predicting Flight by Flight Crack Growth Rates. Journal of Aircraft 1975, 12:699-705.
173. Alzos W.X., Skat A.C., Hillberry B.M. Effect of Single Overload/Underload Cycles on Fatigue Crack Propagation. Fatigue Crack Growth Under Spectrum Loads, ASTM STP 595 1976, 41-60. American Society for Testing and Materials, Philadelphia.
174. Hopkins S.W., Rau C.A., Leverant G.R., Yuen A. Effect of Various Programmed Overloads on the Threshold for High-Frequency Fatigue Crack Growth. Fatigue Crack Growth Under Spectrum Loads, ASTM STP 595 1976, 125-141. American Society for Testing and Materials, Philadelphia.
175. Frost N.E. Notch Effects and the Critical Alternating Stress Required to Propagate a Crack in an Aluminum Alloy Subject to Fatigue Loading. J. Mech. Eng. Sci. 1960, 2:109-119.
176. Sadananda K., Vasudevan A.K., Holtz R.L., Lee E.U. Analysis of Overload Effects and Related Phenomena. International Journal of Fatigue 1999, 21:S233-S246.
177. Golden P.J., Nicholas T. The Effect of Negative Stress Ratio Load History on High Cycle Fatigue Threshold. Journal of ASTM International May 2005, 2(5).
178. Golden P.J. High Cycle Fatigue of Fretting Induced Cracks. PhD Dissertation 2001, Purdue University.
179. Russ S.M. Effect of Underloads on Fatigue Crack Growth of Ti-17. PhD Dissertation October 2003, Georgia Institute of Technology.
180. Ritchie R.O. Small Cracks and High Cycle Fatigue. AMD-Vol. 52 1996, 321-333. ASME, New York, NY. J.C.I. Chang (Ed.).
181. Ritchie R.O., Boyce B.L., Campbell J.P., Roder O., Thompson A.W., Milligan W.W. Thresholds for High-Cycle Fatigue in a Turbine Engine Ti-6Al-4V Alloy. International Journal of Fatigue 1999, 21:653-662.
182. Campbell J.P., Thompson A.W., Ritchie R.O. Mixed-Mode Crack-Growth Thresholds in Ti-6Al-4V under Turbine-Engine High-Cycle Fatigue Loading Conditions. Proceedings of 4th National Turbine Engine High Cycle Fatigue Conference 1999.
183. Powell B.E., Duggan T.V. Predicting the Onset of High Cycle Fatigue Damage: an Engineering Application for Long Crack Fatigue Threshold Data. Int. J. Fatigue 1986, 8:187-194.
184. nd Int. Conf. on Fatigue and Fatigue Thresholds, Birmingham, UK 1984, 3:1671-1682.
185. Powell B.E., Henderson I., Hall R.F. The Growth of Corner Cracks under the Conjoint Action of High and Low Cycle Fatigue. AFWAL-TR-87-4130, Wright-Patterson AFB February 1988, (ADA190510).
186. Gallagher J., et al. Advanced High Cycle Fatigue (HCF) Life Assurance Methodologies. Report # AFRL-ML-WP-TR-2005-4102 July 2004, Air Force Research Laboratory, Wright-Patterson AFB, OH.
187. Sehitoglu H., Gall K., Garcia A.M. Recent Advances in Fatigue Crack Growth Modeling. Int. Jour. Fract 1996, 80:165-192.
188. Zhou Z., Zwerneman F.J. Fatigue Damage Due to Sub-Threshold Load Cycles Between Periodic Overloads. Advances in Fatigue Lifetime Predictive Techniques: Second Volume, ASTM STP 1211 1993, 45-53. American Society for Testing and Materials, Philadelphia. M.R. Mitchell, R.W. Landgraf (Eds.).
189. Byrne J., Hall R.F., Powell B.E. Influence of LCF Overloads on Combined HCF/LCF Crack Growth. Int. J. Fatigue 2003, 25:827-834.
190. Schütz W. A History of Fatigue. Engineering Fracture Mechanics 1996, 54:263-300.
191. f. Int. J. Fatigue 1995, 4:245-251.
192. Neuber H. Theory of Notch Stresses: Principle for Exact Stress Calculations 1946, Edwards, Ann Arbor, Mich.
193. Peterson R.E. Notch Sensitivity. Metal Fatigue 1959, 293-306. McGraw-Hill, New York. G. Sines, J.L. Waisman (Eds.).
194. Heywood Stress Concentration Factors, Relating Theoretical and Practical Factors in Fatigue Loading. Engineering 1955, 179:146-148.
195. Dowling N.E. Mechanical Behavior of Materials 1999, Prentice Hall, Upper Saddle River, New Jersey. 2nd Edition.
196. Haritos G.K., Nicholas T., Lanning D.B. Notch Size Effects in HCF Behavior of Ti-6Al-4V. Int. J. Fatigue 1999, 21:643-652.
197. Smith R.A., Miller K.J. Fatigue Cracks at Notches. Int. J. Mech. Sci. 1977, 19:11-22.
198. Peterson R.E. Stress Concentration Factors 1974, 22. John Wiley & Sons, Inc., New York.
199. Smith R.A., Miller K.J. Prediction of Fatigue Regimes in Notched Components. Int. J. Mech. Sci. 1978, 20:201-206.
200. Kitagawa H., Takahashi S. Applicability of Fracture Mechanics to very Small Cracks or the Cracks in the Early Stage. Proc. of Second International Conference on Mechanical Behaviour of Materials 1976, 627-631.
201. El Haddad M.H., Dowling N.F., Topper T.H., Smith K.N. J Integral Applications for Short Fatigue Cracks at Notches. Int. J. Fract. 1980, 16:15-24.
202. Taylor D. Geometrical Effects in Fatigue: A Unifying Theoretical Model. Int. J. Fatigue 1999, 21:413-420.
203. Taylor D. A Mechanistic Approach to Critical-Distance Methods in Notch Fatigue. Fatigue Fract. Engng Mater. Struct. 2001, 24:215-224.
204. Miller K.J. The Two Thresholds of Fatigue Behaviour. Fatigue Fract. Engng Mater. Struct. 1993, 16:931-939.
205. Nisitani H., Endo M. Unified Treatment of Deep and Shallow Notches in Rotating Bending Fatigue. Basic Questions in Fatigue: Volume I, ASTM STP 924 1988, 136-153. American Society for Testing and Materials, Philadelphia. J.T. Fong, R.J. Fields (Eds.).
206. Isibasi T. Prevention of Fatigue and Fracture of Metals 1954, Yokendo, Tokyo.
207. 7 Cycles. Symposium on Fatigue Tests of Aircraft Structures: Low-Cycle, Full-Scale, and Helicopters, ASTM STP 338 1962, 25-46. American Society for Testing and Materials, Philadelphia.
208. Gunn K. Effect of Yielding on the Fatigue Properties of Test Pieces Containing Stress Concentrations. Aeronautical Quarterly 1955, 6:277-294.
209. Forrest P.G. Fatigue of Metals 1962, (U.S.A. Edition distributed by Addison-Wesley Publishing Co., Reading, MA), Pergamon Press, Oxford.
210. Lanning D.B., Nicholas T., Haritos G.K. On the Use of Critical Distance Theories for the Prediction of the High Cycle Fatigue Limit in Notched Ti-6Al-4V. Int. J. Fatigue 2005, 27:45-57.
211. Gallagher J.P., et al. Improved High Cycle Fatigue Life Prediction. Report #AFRL-MLWR-TR-2001-4159 January, 2001, (on CD ROM), University of Dayton Research Institute, Dayton, OH.
212. Wagner L. Effect of Mechanical Surface Treatments on Fatigue Performance of Titanium Alloys. Fatigue Behavior of Titanium Alloys 1999, 253-265. The Minerals, Metals & Materials Society. R.R. Boyer, D. Eylon, G. Lutjering (Eds.).
213. Hudak S.J., Chan K.S., Chell G.G., Lee Y.D., McClung R.C. A Damage Tolerance Approach for Predicting the Threshold Stresses for High Cycle Fatigue in the Presence of Supplemental Damage. Fatigue-David L. Davidson Symposium 2002, 107-120. TMS (The Minerals, Metals & Materials Society), Warrendale, PA. K.S. Chan, P.K. Liaw, R.S. Bellows, T.C. Zogas, W.O. Soboyejo (Eds.).
214. Lukas P., Kunz L., Weiss B., Stickler R. Non-Damaging Notches in Fatigue. Fatigue Fract. Engng. Mater. Struct. 1986, 9:195-204.
215. Newman J.C. An Improved Method of Collocation for the Stress Analysis of Cracked Plates with Various Shaped Boundaries. NASA Technical Note D-6376 1971.
216. Sheppard S.D. Field Effects in Fatigue Crack Initiation: Long Life Fatigue Strength. Jour. Of Mech. Design. Trans ASME 1991, 113:188-194.
217. Taylor D., O'Donnell M. Notch Geometry Effects in Fatigue: A Conservative Design Approach. Engineering Failure Analysis 1994, 1:275-287.
218. Naik R.A., Lanning D.B., Nicholas T., Kallmeyer A.R. A Critical Plane Gradient Approach for the Prediction of Notched HCF Life. Int. J. Fatigue 2005, 27:481-492.
219. Atzori B., Lazzarin P. Notch Sensitivity and Defect Sensitivity under Fatigue Loading: Two Sides of the Same Medal. Int. J. Fract. 2000, 107:L3-L8.
220. Tanaka K. Engineering Formulae for Fatigue Strength Reduction due to Crack-Like Notches. Int. J. Fract. 1983, 22:R39-R46.
221. Glinka G. Energy Density Approach to Calculation of Inelastic Stress-Strain Near Notches and Cracks. Engng Fract. Mech. 1985, 22:485-508.
222. Atzori B., Lazzarin P., Meneghetti G. Fracture Mechanics and Notch Sensitivity. Fatigue Fract. Engng Mater. Struct. 2003, 26:257-267.
223. Ciavarella M., Meneghetti G. On Fatigue Limit in the Presence of Notches: Classical vs. Recent Unified Formulations. Int. J. Fatigue 2004, 26:289-298.
224. Lukas P., Klesnil M. Fatigue Limit of Notched Bodies. Mater. Sci. Eng. 1978, 34:61-69.
225. Murakami Y. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions 2002, Elsevier Science, Ltd., Kidlington, Oxford.
226. Harkegard G. High-Cycle Fatigue Design of Steam-Turbine Blades at Elevated Temperature. Swedish Symposium on Classical Fatigue 1985, Uddeholm Research Foundation, Sunne, Sweden. N.-G. Ohlson, H. Norberg (Eds.).
227. Vingsbo O., Söderberg D. On Fretting Maps. Wear 1988, 126:131-147.
228. Hutson A.L., Nicholas T., Goodman R. Fretting Fatigue of Ti-6Al-4V Under Flat-on-Flat Contact. Int. J. Fatigue 1999, 21:663-669.
229. Araújo J.A., Nowell D. Analysis of Pad Size Effects in Fretting Fatigue Using Short Crack Arrest Methodologies. Int. J. Fatigue 1999, 21:947-956.
230. Tomlinson G.A., Thorpe P.L., Gough H.J. An Investigation of the Fretting Corrosion of Closely Fitting Surfaces. Proc. Inst. Mech. Engrs, London 1939, 141:223-237.
231. Conner B.P., Nicholas T. Using a Dovetail Fixture to Study Fretting Fatigue and Fretting Palliatives. ASME Jour. Eng. Mat. Tech. 2006, 128:133-141.
232. Gean M.C. Finite Element Analysis of the Mechanics of Blade Disk Contacts. M.S. Thesis May 2004, School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN.
233. Golden P.J., Nicholas T. The Effect of Angle on Dovetail Fretting Experiments in Ti-6Al-4V. Fatigue Fract. Engng Mater. Struct. 2005, 28:1169-1175.
234. Hutson A.L., Nicholas T., Olson S.E., Ashbaugh N.E. Effect of Sample Thickness on Local Contact Behavior in a Flat-on-Flat Fretting Fatigue Apparatus. Int. J. Fatigue 2001, 23:S445-S453.
235. Tada H., Paris P.C., Irwin G.R. Stress Analysis of Cracks Handbook 1973, Del Research Corp., Hellertown, PA.
236. Eden E.M., Rose W.N., Cunningham F.L. The Endurance of Metals-Experiments on Rotating Beams at University College. Proc. Inst. Mech. Engrs. London 1911, 4:839-974.
237. Tomlinson G.A. The Rusing of Steel Surfaces in Contact. Proc. Roy. Society (London) 1927, A115:472-483.
238. Forrest P.G. Fatigue of Metals 1962, (U.S.A. Edition distributed by Addison-Wesley Publishing Co., Reading, MA), Pergamon Press, Oxford.
239. Poon C., Hoeppner D.W. The Effect of Environment on the Mechanism of Fretting Fatigue. Wear 1979, 52:175-191.
240. Schütz W. A History of Fatigue. Engng Fract. Mech. 1996, 54:263-300.
241. Giannakopoulos A.E., Venkatesh T.A., Lindley T.C., Suresh S. The Role of Adhesion in Contact Fatigue. Acta Materialia 1999, 47:4653-4664.
242. Taylor D.E. Environmental Fretting Fatigue. ESIS 18 1994, 375-389. Mechanical Engineering Publications, London. R.B. Waterhouse, T.C. Lindley (Eds.).
243. Conner B.P., Hutson A.L., Chambon L. Observations of Fretting Fatigue Micro-Damage of Ti-6Al-4V. Wear 2003, 255:259-268.
244. Faanes S., Fernando U.S. Life Prediction in Fretting Fatigue using Fracture Mechanics. ESIS 18 1994, 149-159. Mechanical Engineering Publications, London. R.B. Waterhouse, T.C. Lindley (Eds.).
245. Waterhouse R.B. Fretting Fatigue. Int. Mater. Rev. 1992, 37:77-97.
246. Hills D.A., Nowell D., O'Connor J.J. On the Mechanics of Fretting Fatigue. Wear 1988, 125:129-146.
247. Szolwinski M., Farris T. Mechanics of Fretting Fatigue Crack Formation. Wear 1996, 198:93-107.
248. Golden P.J., Grandt A.F. Fracture Mechanics Based Fretting Fatigue Life Predictions in Ti-6Al-4V. Eng. Fract. Mech. 2004, 71:2229-2243.
249. Mutoh Y., Xu J.Q. Fracture Mechanics Approach to Fretting Fatigue and Problems to be Solved. Tribology International 2003, 36:99-107.
250. Hills D.A., Nowell D., Sackfield A. Mechanics of Elastic Contacts 1993, Butterworth-Heinemann, Oxford.
251. Mindlin R.D. Compliance of Elastic Bodies in Contact. ASME J. Appl. Mech. 1949, 16:259-268.
252. Golden, P.J. and Calcaterra, J.R., "A Fracture Mechanics Life Prediction Methodology Applied to Dovetail Fretting", to be published in Tribotogy Int.Lyon presentation.
253. Hills D.A., Nowell D. Mechanics of Fretting Fatigue 1994, Kluwer Academic Publishers, Dordrecht, The Netherlands.
254. Dobromirski J.M. Variables of Fretting Processes: Are There 50 of Them. Fretting Fatigue, ESIS 18 1994, 60-66. Mechanical Engineering Publications, London. R.B. Waterhouse, T.C. Lindley (Eds.).
255. Hutson A.L., Neslen C., Nicholas T. Charactezation of Fretting Fatigue Crack Initiation Processes in Ti-6Al-4V. Tribology International 2003, 36:133-143.
256. Ciavarella M., Hill D.A., Monno G. The Influence of Rounded Edges on Indentation by a Flat Punch. Proc. Inst. Mech. Engrs., J. Mech. Eng. Sci. 1998, 212C:319-328.
257. Giannakopoulos A.E., Lindley T.C., Suresh S., Chenut C. Similarities of Stress Concentrations in Contact at Round Punches and Fatigue at Notches: Implications to Fretting Fatigue Crack Initiation. Fatigue Fract. Eng. Mater. Struct. 2000, 23:562-571.
258. Johnson K.L. Contact Mechanics 1985, Cambridge University Press, Cambridge.
259. Murthy H., Farris T.N., Slavik D.C. Fretting Fatigue of Ti-6Al-4V Subjected to Blade/Disk Contact Loading. Developments in Fracture Mechanics for the New Century May 2001, 41-48. 50th Anniversary of Japan Society of Materials Science, Osaka, Japan.
260. McVeigh P.A., Harish G., Farris T.N., Szolwinski M.P. Modeling Contact Conditions in Nominally Flat Contacts for Application to Fretting Fatigue of Turbine Engine Components. Int. J. Fatigue 1999, 21:S157-S165.
261. Lindley T.C. Fretting Fatigue in Engineering Alloys. Int. J. Fatigue 1997, 19(Suppl. No. 1):S.
262. Ruiz C., Boddington P.H.B., Chen K.C. An Investigation of Fatigue and Fretting in a Dovetail Joint. Expt. Mechanics 1984, 24:208-217.
263. Magaziner R., Jin O., Mall S. Slip Regime Explanation of Observed Size Effects in Fretting. Wear 2004, 257:190-197.
264. Naboulsi S., Mall S. Fretting Fatigue Crack Initiation Behavior Using Process Volume Approach and Finite Element Analysis. Tribology International 2003, 36:121-131.
265. Lykins C.D., Mall S., Jain V.K. A Shear Stress-Based Parameter for Fretting Fatigue Crack Initiation. Fatigue Fract. Eng. Mater. Struct. 2001, 24:461-473.
266. Findley W.N. Fatigue of Metals Under Combinations of Stresses. Trans. ASME. 1957, 79:1337-1348.
267. Namjoshi S., Mall S., Jain V., Jin O. Fretting Fatigue Crack Initiation Mechanism in Ti-6Al-4V. Fatigue Fract. Eng. Mater. Struct. 2002, 25:955-964.
268. Neu R., Paper J., Swalla D.R. Methodologies for Linking Nucleation and Propagation Approaches for Predicting Life Under Fretting Fatigue. Fretting Fatigue; Current Technology and Practices, ASTM STP 1367 2000, 369-388. American Society for Testing and Materials, West Conshohocken, PA. D.W. Hoeppner, V. Chandrasekaran, C.B. Elliot (Eds.).
269. Araújo J.A., Nowell D. The Effect of Rapidly Varying Contact Stress Fields on Fretting Fatigue. Int. J. Fatigue 2002, 24:763-775.
270. Fatemi A., Socie D.F. A Critical Plane Approach to Multiaxial Fatigue Damage Including Out of Phase Loading. Fatigue Fract. Eng. Mates. Struct. 1988, 11:149-165.
271. Nowell D., Dini D. Stress Gradient Effects in Fretting Fatigue. Tribology International 2003, 36:71-78.
272. Nix K.J., Lindley T.C. The Application of Fracture Mechanics to Fretting Fatigue. Fatigue Fract. Eng. Mater. Struct. 1985, 8:143-160.
273. Nicholas T., Hutson A., John R., Olson S. A Fracture Mechanics Methology Assessment for Fretting Fatigue. Int. J. Fatigue 2003, 25:1069-1077.
274. Naboulsi S., Nicholas T. Limitations of the Coulomb Friction Assumption in Fretting Fatigue Analysis. Int. J. Solids Struct. 2003, 40:6497-6512.
275. Chan K.S., Davidson D.L., Lee Y.D., Hudak S.J. A Fracture Mechanics Approach to High Cycle Fretting Fatigue Based on The Worst Case Fret Concept: Part I-Model Development. Int. J. Fract. 2001, 112:299-330.
276. th AIAA/ASME/ASCE/ASC Structures, Structural Dynamics, and Materials, and Materials Conf., vol. 2, St. Louis, MO April 1999, 1188-1196. (CD-ROM). See also.
277. McVeigh P.A. Analysis of Fretting Fatigue in Aircraft Structures: Stresses, Stress Intensity Factors, and Life Predictions. Ph.D. Thesis 1999, School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN.
278. Beghini M., Bertini L., Fontanari V. Weight Function for an Inclined Edge Crack in a Semi-plane. Int. J. Fract. 1999, 99:281-292.
279. Jin O., Mall S., Sahan O. Fretting Fatigue Behavior of Ti-6Al-4V at Elevated Temperature. Int. J. Fatigue 2005, 27:395-401.
280. Golden P.J., Hutson A.L., Bartha B., Nicholas T. A Comparison of Fretting Fatigue Test Fixtures. presented at ICEM 12-12th Iternational Conference on Experimental Mechanics 29 August-2 September 2004, Conference proceedings only.
281. Jin O., Mall S. Effects of Independent Pad Displacement on Fretting Fatigue Behavior of Ti-6Al-4V. Wear 2002, 253:585-596.
282. Naboulsi S., Mall S. Investigation of High Cycle and Low Cycle Fatigue Interaction on Fretting Behavior. Int. J. of Mechanical Sciences 2002, 44:1625-1645.
283. McVeigh P.A., Harish G., Farris T.N., Szolwiski M.P. Modeling Contact Conditions in Nominally Falt Contacts for Application to Fretting Fatigue of Turbine Engine Components. Int. J. Fatigue 1999, 21:S157-S165.
284. Swalla D.R., Neu R.W. Influence of Coefficient of Friction on Fretting Fatigue Crack Nucleation Prediction. Tribology International 2001, 34:493-503.
285. Goh C.-H., Wallace J.M., Neu R.W., McDowell D.L. Polycrystal Plasticity Simulations of Fretting Fatigue. Int. J. Fatigue 2001, 23:S423-S435.
286. Farris T.N., Murthy H., Matlik J.F. Fretting Fatigue. Comprehensive Structural Integrity Fracture of Materials from Nano to Macro: Volume 4: Cyclic Loading and Fatigue 2003, 281-326. Elsevier. R.O. Ritchie, Y. Murakami (Eds.).
287. Hutson A.L., Niinomi M., Nicholas T., Eylon D. Effect of Various Surface Conditions of Fretting Fatigue Behaviour of Ti-6Al-4V. Int. J. Fatigue 2002, 24:1223-1234.
288. Namjoshi S.A., Jain V.K., Mall S. Effects of Shot-Peening on Fretting Fatigue Behavior of Ti-6Al-4V. ASME Journal of Engineering Materials and Technology 2002, 124:222-228.
289. Nicholas T., Hutson A.L., Olson S., Ashbaugh N. In Search of a Parameter for Fretting Fatigue. Advances in Fracture Research, Proceedings of ICF-10 2001, Paper # 0809, CD ROM, Elsevier. K. Ravi-Chandar, B.L. Karihaloo, T. Kishi, R.O. Ritchie, A.T. Yokobori, T. Yokobori (Eds.).
290. Hutson A.L., John R., Nicholas T. Fretting Fatigue Crack Analysis in Ti-6Al-4V. Int. J. Fatigue 2005, 27(No. 10-12):1582-1589. (Special Issue on Fatigue Damage of Structural Materials).
291. Hills D.A., Nowell D., Sackfield A. Surface Fatigue Consideration in Fretting. Interface Dynamics, Proceedings of the 14th Leeds-Lyon Symposium on Tribology 1988, 35-50. Elsevier, Amsterdam. D. Dowson, C.M. Taylor, M. Godet, D. Berthe (Eds.).
292. Dini D., Nowell D. Prediction of the Slip Zone Friction Coefficient in Flat and Rounded Contact. Wear 2003, 254:364-369.
293. Farris T.N., Murthy H., Matlik J.F. Fretting fatigue. Comprehensive Structural Integrity Fracture of Materials from Nano to Macro; Volume 4: Cyclic Loading and Fatigue 2003, 281-326. Elsevier. R.O. Ritchie, Y. Murakami (Eds.).
294. Martinez C.M. Effects of Ballistic Impact Damage on Fatigue Crack Initiation in Ti-6Al-4V Simulated Engine Blades. M.S. Thesis April, 2000, School of Engineering, University of Dayton, Dayton, OH.
295. Peters J.O., Roder O., Boyce B.L., Thomson A.W., Ritchie R.O. Role of Foreign Object Damage on Thresholds for High-Cycle Fatigue in Ti-6Al-4V. Metallurgical and Materials Transactions 2000, 31A:1571-1583.
296. Mall S., Hamrick J.L., Nicholas T. High Cycle Fatigue Behavior of Ti-6Al-4V with Simulated Foreign Object Damage. Mech. of Mat. 2001, 33:679-692.
297. Franklin, J. and Kleinakis, E. "FOD Data Mining and Investigation", Chapter 2 in Ref. [4].
298. Best Practices for the Mitigation and Control of Foreign Object Damage-Induced High Cycle Fatigue in Gas Turbine Engine Compression System Airfoils. Work performed by RTO AVT Task Group-094, NATO RTO Technical Report TR-AVT-094 December 2004.
299. Haritos G., Nicholas T., Lanning D. Notch Size Effects in HCF Behavior of Ti-6Al-4V. Int. J. Fatigue 1999, 21:643-652.
300. Nicholas T., Barber J.P., Bertke R.S. Impact Damage on Titanium Leading Edges from Small Hard Objects. Experimental Mechanics 1980, 20:357-364.
301. Gallagher J., et al. Advanced High Cycle Fatigue (HCF) Life Assurance Methodologies. Report # AFRL-ML-WP-TR-2005-4102 July 2004, Air Force Research Laboratory, Wright-Patterson AFB, OH, July.
302. Birkbeck J.C. Effects of FOD on the Fatigue Crack Initiation of Ballistically Impacted ti-6Al-4V Simulated Engine Blades. Ph.D. Thesis August 2002, School of Engineering, University of Dayton, Dayton, OH.
303. Peters J.O., Ritchie R.O. Influence of Foreign-Object Damage on Crack Initiation and Early Crack Growth During High-Cycle Fatigue of Ti-6Al-4V. Eng. Fract. Mech. 2000, 67A:193-207.
304. Ruschau J.J., Nicholas T., Thompson S.R. Influence of Foreign Object Damage (FOD) on Fatigue Life of Simulated Ti-6Al-4V Airfoils. Int. Jour. Impact. Engng. 2001, 25:233-250.
305. Ruschau J.J., Thompson S.R., Nicholas T. High Cycle Fatigue Limit Stresses for Airfoils Subjected to Foreign Object Damage. Int. J. Fatigue 2003, 25:955-962.
306. Martinez C.M., Birkbeck J., Eylon D., Nicholas T., Thompson S.R., Ruschau J.J., Porter W.J. Effects of Ballistic Impact Damage on Fatigue Crack Initiation in Ti-6Al-4V Simulated Engine Blades. Mat. Sci. Eng. 2002, A325:465-477.
307. Thompson S.R., Ruschau J.J., Nicholas T. Influence of Residual Stresses on High Cycle Fatigue Strength of Ti-6Al-4V Leading Edges Subjected to Foreign Object Damage. Int. J. Fatigue 2001, 23:S405-S412.
308. Peterson R.E. Stress Concentration Factors 1974, 22. John Wiley & Sons, Inc., New York.
309. Peterson R.E. Notch-Sensitivity. Metal Fatigue 1959, 293-306. McGraw-Hill, New York. G. Sines, J.L. Waisman (Eds.).
310. Lamning D.B., Nicholas T., Haritos G.K. On the Use of Critical Distance Theories for the Prediction of the High Cycle Fatigue Limit in Notched Ti-6Al-4V. Int. J. Fatigue 2005, 27:45-57.
311. Nicholas T., Thompson S.R., Porter W.J., Buchanan D.J. Comparison of Fatigue Limit Strength of Ti-6Al-4V in tension and Torsion after Real and Simulated Foreign Object Damage. Int. J. Fatigue 2005, 27(10-12):1637-1643. (Special Issue on Fatigue Damage of Structural Materials).
312. Nicholas T., Thompson S.R., Porter W.J., Buchanan D.J. Comparison of Fatigue Limit Strength of Ti-6Al-4V in tension and Torsion after Real and Simulated Foreign Object Damage. Int. J. Fatigue 19-24 September 2004, to be published in.
313. Nalla R.K., Altenberger I., Noster U., Liu G.Y., Scholtes B., Ritchie R.O. On the Influence of Mechanical Surface Treatments-Deep Rolling and Laser Shock Peening-on the Fatigue Behavior of Ti-6Al-4V at Ambient and Elevated Temperatures. Mat. Sci. Eng. 2003, A355.
314. Nicholas T., Maxwell D.C. Mean Stress Effects on the High Cycle Fatigue Limit Stress in Ti-6A1-4V. Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417 2002, 476-492. American Society for Testing and Materials, West Conshohocken, PA. W.G. Reuter, R.S. Piascik (Eds.).
315. Tabernig B., Powell P., Pippan R. Resistance Curves for the Threshold of Fatigue Crack Propagation in Particle Reinforced Aluminium Alloys. Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372 2000, 96-108. American Society for Testing and Materials, West Conshohocken, PA. J.C. Newman, R.S. Piascik (Eds.).
316. Smith S.W., Piascik R.S. An Indirect Technique for Determining Closure-Free Fatigue Crack Growth Behavior. Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372 2000, 109-122. American Society for Testing and Materials, West Conshohocken, PA. J.C. Newman, R.S. Piascik (Eds.).
317. Haake F.K., Salivar G.C., Hindle E.H., Fischer J.W., Annis C.G. Threshold Fatigue Crack Growth Behavior. WRDC-TR-89-4085 1989, (ADA218063), Wright-Patterson AFB, OH, October.
318. Larsen J.M., Worth B.D., Annis C.G., Haake F.K. An Assessment of the Role of Near-Threshold Crack Growth in High-Cycle-Fatigue Life Prediction of Aerospace Titanium Alloys under Turbine Engine Spectra. Int. J. Fracture 1996, 80:237-255.
319. Cowles B.A. High Cycle fatigue in Aircraft Gas Turbines-An Industry Perspective. Int. J Fracture 1996, 80:147-163.
320. Nicholas T., Zuiker J.R. On the Use of the Goodman Diagram for High Cycle Fatigue Design. Int. J. Fracture 1996, 80:219-235.
321. Guedou J.Y., Rongvaux J.M. Effect of Superimposed Stresses at High Frequency on Low Cycle Fatigue. Low Cycle Fatigue 1988, 938-969. ASTM, Philadelphia.
322. Hawkyard M., Powell B.E., Husey I., Grabowski L. Fatigue Crack Growth under Conjoint Action of Major and Minor Stress. Fatigue Fract. Eng. Mater. Struct. 1996, 19:217-227.
323. Engine Structural Integrity Program (ENSIP) MIL-STD-1783 (USAF) 30 November 1984.
324. Morrissey R.J., McDowell D.L., Nicholas T. Frequency and Stress Ratio Effects in High Cycle Fatigue of Ti-6Al-4V. Int. J. Fatigue 1999, 21:679-685.
325. Paris P.C., Tada H. Near Threshold Fatigue Crack Growth versus Long Finite Life. Fatigue Fract. Eng. Mater. Struct. 2002, 25:727-733.
326. Skorupa M. Load Interaction Effects during Fatigue Crack Growth under Variable Amplitude Loading-A Literature Review. Part I: Empirical Trends. Fatigue Fract. Eng. Mater. Struct. 1998, 21:987-1006.
327. Skorupa M. Load Interaction Effects during Fatigue Crack Growth under Variable Amplitude Loading-A Literature Review. Part II: Qualitative Interpretation. Fatigue Fract. Eng. Mater. Struct. 1999, 22:905-926.
328. Schütz W. A History of Fatigue. Engng. Fract. Mech. 1996, 54:263-300.
329. Standard Test Method for Measurement of Fatigue Crack Growth Rates. Annual Book of ASTM Standards 1991, E 647-91:654-681.
330. Döker H., Bachmann V., Marci G. A Comparison of Different Methods of Determination of the Threshold for Fatigue Crack Propagation. Fatigue Thresholds 1982, 45. EMAS, Warley, UK. J. Backlund, A.F. Blom, C.J. Beevers (Eds.).
331. Castro D.E., Marci G., Munz D. A Generalized Concept of a Fatigue Threshold. Fatigue Fract. Engng. Mater. Struct. 1987, 10:305-314.
332. Lenets Y.N., Nicholas T. Load History Dependence of Fatigue Crack Growth Thresholds for a Ti-Alloy. Engineering Fracture Mechanics 1998, 60:187-203.
333. Mall S., Perez J.A., Nicholas T. Influence of Loading History on Fatigue Threshold Behavior in a Titanium Alloy. Engineering Fracture Mechanics 1990, 37:15-26.
334. Döker H., Bachmann V. Determination of Crack Opening Load by use of Threshold Behavior. Mechanics of Fatigue Crack Closure, ASTM STP 982 1988, 247-259. ASTM, Philadelphia. J.C. Newman, W. Elber (Eds.).
335. Suresh S., Ritchie R.O. On the Influence of Fatigue Underloads on Cyclic Crack Growth at Low Stress Intensities. Mater. Sci. and Engng. 1981, 51:61-69.
336. Ritchie R.O., Boyce B.L., Campbell J.P., Roder O., Thompson A.W., Milligan W.W. Thresholds for High-Cycle Fatigue in a Turbine Engine Ti-6A1-4V Alloy. Int. J. Fatigue 1999, 21:653-662.
337. Forth S.C., Newman J.C., Forman R.G. On Generating Fatigue Crack Growth Thresholds. Int. J. Fatigue 2003, 25:9-15.
338. Forth S.C., Newman J.C., Forman R.C. Evaluation of Fatigue Crack Thresholds using Various Experimental Methods. J. ASTM International June 2005, 2:1-16. No. 6, Paper ID JAI12847, American Society for Testing and Materials.
339. Bain K.R., Miller D.S. Fatigue Crack Growth Threshold Stress Intensity Determination via Surface Flaw (Kb Bar) Specimen Geometry. Fatigue and Fracture Mechanics: 31st Volume, ASTM STP 1389 2000, 445-456. American Society for Testing and Materials, West Conshohocken, PA. G.R. Halford, J.P. Gallagher (Eds.).
340. th in Ti-6Al-4V at Room Temperature. Int. J. Fatigue 1999, 21:733-741.
341. VanStone R.H., Lawless B.H. Modeling of Threshold Crack Growth in Ti-6Al-4V at Room Temperature. Proceedings, Fifth National Turbine Engine High Cycle fatigue Conference March 2000.
342. VanStone R.H. Residual Life Prediction Methods for Gas Turbine Components. Mat. Sci. Eng. 1988, A103:49-61.
343. Lawson L., Chen E.Y., Meshii M. Near-Threshold Fatigue: A Review. Int. J. Fatigue 1999, 21:S15-S34.
344. Elber W. Fatigue Crack Closure under Cyclic Tension. Eng. Fract. Mech. 1970, 2:37-45.
345. Elber W. The Significance of Fatigue Crack Closure. Damage Tolerance in Aircraft Structures, ASTM STP 486 1971, 230-242. American Society for Testing and Materials, Philadelphia.
346. Suresh S., Zaminski G.F., Ritchie R.O. Oxide Induced Crack Closure: An Explanation for Near-Threshold Corrosion Fatigue Crack Growth Behavior. Metallurgical Transactions 1981, 12A:1435-1443.
347. Walker N., Beevers C.J. A Fatigue Crack Closure Mechanism in Titanium. Fatigue Engng. Mater. Struct. 1979, 1:135-148.
348. Ritchie R.O. Mechanisms of Fatigue-Crack Propagation in Metals, Ceramics and Composites: Role of Crack-Tip Shielding. Materials Science and Engineering 1988, 103:15-28.
349. Ritchie R.O. Mechanisms of Fatigue-Crack Propagation in Ductile and Brittle Solids. International Journal of Fracture 1999, 100:55-83.
350. Sadananda K., Vasudevan A.K. Short Crack Growth Behavior. Fatigue and Fracture Mechanics: 27th Volume, ASTM STP 1296 1997, 301-316. American Society for Testing and Materials. R.S. Piascik, J.C. Newman, N.E. Dowling (Eds.).
351. Vasudevan A.K., Sadananda K., Glinka G. Critical Parameters for Fatigue Damage. Int. J. Fatigue 2001, 23:S39-S53.
352. Schmidt R.A., Paris P.C. Threshold for Fatigue Crack Propagation and Effects of Load Ratio and Frequency. Progress in Fatigue Crack Growth and Fracture Testing, ASTM STP 536 1973, 79-94. American Society for Testing and Materials, Philadelphia.
353. Vasudevan A.K., Sadananda K. A Review of Crack Closure, Fatigue Crack Threshold and Related Phenomena. Mater. Sci. Eng. 1994, A188:1-22.
354. Boyce B.L., Ritchie R.O. Effect of Load Ratio and Maximum Stress Intensity on the Fatigue Threshold in Ti-6Al-4V. Eng. Fract. Mech. 2001, 68:129-147.
355. Vasudevan A.K., Sadananda K. Application of Unified Fatigue Damage Approach to Compression-Tension Region. Int. J. Fatigue 1999, 21:S263-S273.
356. Lang M. A Model for Fatigue Crack Growth, Part I: Phenomenology. Fatigue Fract. Eng. Mater. Struct. 2000, 23:587-601.
357. Heywood R.B. The Effect of High Loads on Fatigue. I.U.T.A.M. Colloquium on Fatigue 1956, 92-102. Springer-Verlag, Berlin. W. Weibull, F. Odqvist (Eds.).
358. Gerber T.L., Fuchs H.O. Improvement in the Fracture Strength of Notched Bars by Compressive Self-Stresses. Achievement of High Fatigue Resistance in Metals and Alloys, ASTM STP 467 1970, 276-295. American Society for Testing and Materials, Philadelphia.
359. Gadd E.R. Fatigue in Aero-Engines. Proceedings of the International Conference on Fatigue of Metals 1956, 658-671.
360. Prevey P.S., Jayaraman N., Ravindranath R. Incorporation of Residual Stresses in the Fatigue Performance Design of Ti-6Al-4V. Presented at International Conference on Fatigue Damage of Structural Materials V 19-24 September 2004, (to be published in Int. J. Fatigue).
361. Murakami Y. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions 2002, Elsevier Science, Ltd, Kidlington, Oxford.
362. Neuber H. Theory of Notch Stresses: Principle for Exact Stress Calculations 1946, Edwards, Ann Arbor, Mich.
363. Almen J.O., Black P.H. Residual Stresses and Fatigue in Metals 1963, McGraw-Hill, New York.
364. Hanyuda T., Nakamura S., Endo T., Shimizu H. Effect of Shot Peening on fatigue Strength of Titanium Alloy. Proceedings of the ICSP5, 5th International Conference on Shot Peening 1993, 139-148.
365. Wagner L., Gerdes C., Lutjering G. Influence of Surface Treatment on Fatigue Strength of Ti-6A1-4V, Titanium 84 Sci. and Technol. Proc. 5th Int. Conf. 1985, 2147-2154.
366. Hasegawa N., Watanabe Y., Kato Y. Effect of Shot Peening on Fatigue Strength of Carbon Steel at Elevated Temperature. Proceedings of the ICSP5, 5th International Conference on Shot Peening 1993, 157-162.
367. Dorr T., Wagner L. Influence of Stress Gradient on Fatigue Behavior of Shot Peened Timetal 110. Proceedings of the ICSP6 6th International Conference on Shot Peening 1996, 223-232.
368. Shao P.-G., Yao M., Li X.B., Ru J.L., Wang R.Z. Qualitative Analysis About Effect of Shot Peening on Fatigue Limit of a 300M Steel under the Rotating Bending Condition. Proceedings of the ICSP6, 6th International Conference on Shot Peening 1996, 290-295.
369. Li J., Yao M., Wang R.Z. A New Concept for Fatigue Strength Evaluation of Shot Peened Speciments. Proceedings of the ICSP4, 4th International Conference on Shot Peening 1990, 255-262.
370. Song P.S., Wen C.C. Crack Closure and Crack Growth Behaviour in Shot Peened Fatigued Specimen. Engineering Fracture Mechanics 1999, 63:295-304.
371. Drechsler A., Kiese J., Wagner L. Effects of Shot Peening and Roller-Burnishing on Fatigue Performance of Various Titanium Alloys. Proceedings of the ICSP7, 7th International Conference on Shot Peening 1999, 145-152.
372. Guagliano M., Vergani L. An Approach for Prediction of Fatigue Strength of Shot Peened Components. Engineering Fracture Mechanics 2004, 71:5015-5512.
373. Rodopoulos C.A., Curtis S.A., de los Rios E.R., SolisRomero J. Optimisation of the Fatigue Resistance of 2024-T351 Aluminium Alloys by Controlled Shot Peening-Methodology, Results and Analysis. Int. J. Fatigue 2004, 26:849-856.
374. Curtis S., de los Rios E.R., Rodopoulos C.A., Levers A. Analysis of the Effects of Controlled Shot Peening on Fatigue Damage of High Strength Aluminium Alloys. Int. J. Fatigue 2003, 25:59-66.
375. Nalla R.K., Altenberger I., Noster U., Liu G.Y., Scholtes B., Ritchie R.O. On the Influence of Mechanical Surface Treatments-Deep Rolling and Laser Shock Peening-on the Fatigue Behavior of Ti-6A1-4V at Ambient and Elevated Temperatures. Mat. Sci. Eng. 2003, A355:216-230.
376. Clauer A.H., Fairand B.P. Interactions of Laser-Induced Stress Waves with Metals 1979, ASM International, Materials Park, OH.
377. Ruschau J.J., John R., Thompson S.R., Nicholas T. Fatigue Crack Growth Rate Characteristics of Laser Shock Peened Titanium. Jour. Eng. Mat. Tech. 1999, 121:321-329.
378. Ruschau J.J., John R., Thompson S.R., Nicholas T. Fatigue Crack Nucleation and Growth Rate Behavior of Laser Shock Peened Titanium. Int. J. Fatigue 1999, 21(Supp. 1):S199-S209.
379. Clauer A.H., Holbrook J.H. Effects of Laser Induced Shock Waves on Metals. Shock Waves and High-Strain-Rate Phenomena in Metals 1981, 675-702. Plenum Press, New York. M.A. Meyers, L.E. Murr (Eds.).
380. Lykins C., John R. Prediction of Crack Growth in a Laser Shock Peened Zone. Proceedings of International Symposium on Inelastic Deformation, Damage and Life Analysis May 1997, Springer-Verlag. V.K. Arya (Ed.).
381. Kang K.J., Song J.H., Earmme Y.Y. Fatigue Crack Growth and Closure Behaviur Through a Compressive Residual Stress Field. Fatigue Fract. Engng. Mater. Struct. 1990, 13:1-13.
382. Timoshenko S.P., Goodier J.N. Theory of Elasticity 1970, 71. McGraw-Hill, New York. 3rd edn.
383. Thumser R., Bergmann J.W., Vormwald M. Residual Stress Fields and Fatigue Analysis of Autofrettaged Parts. Int. J. Pressure Vessels and Piping 2002, 79:113-117.