High cycle fatigue threshold in the presence of naturally initiated small surface cracks

ASTM Special Technical Publication

Volumn , Issue 1417, 2002, Pages 129-146

  Moshier, Monty A ^a   Nicholas, Theodore ^b   Hillberry, Ben M ^c  

^a Anteon Corporation   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

^c Purdue University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; CRACK INITIATION; CRACK PROPAGATION; ELECTROCHEMICAL SENSORS; INFRARED IMAGING; MATHEMATICAL MODELS; SCANNING ELECTRON MICROSCOPY; STRESSES; TITANIUM ALLOYS;

DIRECT CURRENT POTENTIAL DIFFERENCE; ELECTROCHEMICAL FATIGUE SENSOR; HIGH CYCLE FATIGUE; STRESS RELIEF ANNEALED; SURFACE CRACK MEASUREMENT;

FATIGUE OF MATERIALS;

EID: 0036967679     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (22)

1. Bathias, C., "There is No Infinite Fatigue Life in Metallic Materials," Fatigue & Fracture of Engineering Materials & Structures, Vol. 22, 1999, pp. 559-565.
2. Lenets, Y. N. and Nicholas, T., "Load History Dependence of Fatigue Crack Thresholds for Ti-Alloy," Engineering Fracture Mechanics, Vol. 60, 1998, pp. 187-203.
3. Guedou, J. Y. and Rongvaux, J. M., "Effect of Superimposed Stresses at High Frequency on Low Cycle Fatigue," Low Cycle Fatigue, ASTM STP 942, American Society for Testing and Materials, Philadelphia, PA, 1988, pp. 938-960.
4. Hopkins, S. W., Rau, C. A., Leverant, G. R. and Yuen, A., "Effect of Various Programmed Overloads on the Threshold for High-Frequency Fatigue Crack Growth," Fatigue Crack Growth Under Spectrum Loads, ASTM STP 595, American Society for Testing and Materials, Philadelphia, 1976, pp. 125-141.
5. Powell, B. E., Dugan, T. V. and Jeal, R., "The Influence of Minor Cycles on Low Cycle Fatigue Crack Propagation," International Journal of Fatigue, Vol. 4, 1982, pp. 4-14.
6. Powell, B. E., Henderson, I. and Duggan, T. V., "The Effect of Combined Major and Minor Stress Cycles on Fatigue Crack Growth,". Second International Congress on Fatigue (Fatigue '84), 1984, pp. 893-902.
7. Hawkyard, M., Powell, B. E., Hussey, I. and Grabowski, L., "Fatigue Crack Growth under Conjoint Action of Major and Minor Stress," Fatigue & Fracture of Engineering Materials & Structures, Vol. 19, 1996, pp. 217-227.
8. Hall, R. F. and Powell, B. E., "The Effects of LCF Loadings on HCF Crack Growth," US AFOSR Annual Report for Phase II, Report Number F567, University of Portsmouth, England, May 1999.
9. Moshier, M. A., Hillbery, B. M., and Nicholas, T., "The Effect of Low-Cycle Fatigue Cracks and Loading History on the High Cycle Fatigue Threshold," Fatigue and Fracture Mechanics: 31st Volume, ASTM STP 1389, G. R. Halford and J. P. Gallagher, Eds., American Society for Testing and Materials, West Conshohocken, PA 2000, pp. 427-444.
10. Moshier, M. A., Nicholas, T. and Hillberry, B. M., "Load History Effects on Fatigue Crack Growth Threshold for Ti-6A1-4V and Ti-17 Titanium Alloys," International Journal of Fatigue, 2001 (in press)
11. Maxwell, D. C. and Nicholas, T., "A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue," Fatigue and Fracture Mechanics: 29th Volume, ASTM STP 1321, T. L. Panontin and S. D. Sheppard, Eds., American Society for Testing and Maerials, West Conshohocken, PA, 1999, pp. 626-641.
12. Nicholas, T. and Maxwell, D. C., "Evolution and Effects of Damage in Ti-6A1-4V under High Cycle Fatigue," Progress in Mechanical Behaviour of Materials, Proceedings of the Eighth International Conference on the Mechanical Behaviour of Materials, ICM-8, F. Ellyin and J. W. Provan, Eds. Vol. III, 1999, pp. 1161-1166.
13. Bellows, R. S., Muju, S. and Nicholas, T., "Validation of the Step Test Method for Generating Haigh Diagrams for Ti-6A1-4V," International Journal of Fatigue, Vol. 21, 1999, pp. 687-697.
14. Bellows, R. S., Bain, K. R. and Sheldon, J. W., "Effect of Step Testing and Notches on the Endurance Limit of Ti-6A1-4V," Mechanical Behavior of Advanced Materials, MD-Vol. 84, D. C. Davis, Ed. ASME, New York, 1998, pp. 27-32.
15. Newman, J. C., Jr. and Edwards, P. R., "Short Crack Growth Behaviour in an Aluminum Alloy - An AGARD Cooperative Test Programme," Conference Proceedings AGARD R-732, North Atlantic Treaty Organization, 1988.
16. Li, Y. F., Wang, J., Wang, M. Z., DeLuccia, J. and Laird, C., "Development of the Electrochemical Fatigue Sensor for Evaluating Fatigue Damage," Proc., Julia Weertman Symposium, TMS Fall Meeting, Cincinnati, Y.-W. Chung, D. C. Dunand, P. K. Liaw and G. B. Olson, Eds., TMD, Warrendale, PA, 1999, pp. 333-340.
17. El Haddad, M. H., Smith, K. N. and Topper, T. H., "Fatigue Crack Propagation of Short Cracks," Journal of Engineering Materials and Technology, Vol. 101, 1979, pp. 42-46.
18. Chan, K. S., Davidson, D. L., Lee, Y-D. and Hudak, S. J., Jr., "A Fracture Mechanics Approach to High Cycle Fretting Fatigue Based on The Worst Case Fret Concept: Part I - Model Development," International Journal of Fracture, 2001 (in press).
19. Kitagawa, H. and Takahashi, S., "Applicability of Fracture Mechanics to Very Small Cracks or the Cracks in the Early Stage," Proc. of Second International Conference on Mechanical Behaviour of Materials, Boston, MA, 1976, pp. 627-631.
20. Dr. Tae-Won Park, Air Force Research Laboratory, Visiting Scientist from Republic of Korea, unpublished data.
21. Lanning, D., Haritos, G. K., Nicholas, T. and Maxwell, D. C., "Low-Cycle Fatigue/High-Cycle Fatigue Interactions in Notched Ti-6A1-4V," Fatigue & Fracture of Engineering Materials & Structures, Vol. 24, 2001 (in press).
22. Moshier, M. A., "The Effect of Low Cycle Fatigue Cracks and Loading History on High Cycle Fatigue Threshold," Ph.D. Dissertation, Purdue University, 2000.