The effect of low cycle fatigue cracks and loading history on high cycle fatigue threshold

ASTM Special Technical Publication

Volumn , Issue 1389, 2000, Pages 427-444

  Moshier, Monty A ^a   Nicholas, Theodore ^a   Hillberry, Ben M ^b  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b PURDUE UNIVERSITY   (United States)

Author keywords

Fracture mechanics; High cycle fatigue; Loading history; Overloads; Small cracks; Stress intensity; Threshold; Ti 6A1 4V

Indexed keywords

EID: 8744311813     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp14813s     Document Type: Review

References (37)

1. Thomson, D. E. and Griffin, J. T., "The National Turbine Engine High Cycle Fatigue Program," Global Gas Turbine News, Vol. 39, ASME International, 1999, pp. 14-17.
2. Engine Structural Integrity Program, USAF MIL-STD-1783, November 1984.
3. Nicholas, T., "Critical Issues in High Cycle Fatigue," International Journal of Fatigue, Vol. 21, Supp. 1, 1999, pp. S221-S231.
4. Nicholas, T. and Zuiker, J. R., "On the Use of the Goodman Diagram for High Cycle Fatigue Design," International Journal of Fracture, Vol. 80, 1996, pp. 219-235.
5. Akita, K., Misawa, H., Tobe, S., and Kodama, S., "Fatigue Crack Propagation Behavior of TÎ-6A1-4V Alloy under Simplified Loading with a Single Overload," Fatigue '93, J. P. Bailon and J. I. Diskson, Eds., Vol. 3, EMAS, Warley U.K., 1993, pp. 1575-1580.
6. th in Ti-6A1-4V at Room Temperature," International Journal of Fatigue, Vol. 21, 1999, pp. 733-741.
7. Lenets, Y. N. and Nicholas, T., "Load History Dependence of Fatigue Crack Thresholds for Ti-Alloy," Engineering Fracture Mechanics, Vol. 60, 1998, pp. 187-203.
8. Makhutov, N., Romanov, A., and Gadenin, M., "High-Temperature Low-Cycle Fatigue Resistance Under Superimposed Stresses at Two Frequencies," Fatigue of Engineering Materials and Structures, Vol. 1, 1979, pp. 281-285.
9. Zaitsev, G. Z. and Faradzhov, R. M., Metallovedenie i Tennicheskaya Obrabotka, Vol. 2, 1970, pp. 44-46.
10. Ouyang, J., Wang, Z., Song, D., and Yan, M., "Influence of High Frequency Vibrations on the Low Cycle Fatigue Behavior of a Superalloy at Elevated Temperature," Low Cycle Fatigue, ASTM STP 942, American Society for Testing and Materials, Philadelphia, PA, 1988, pp. 961-971.
11. Goodman, R. C. and Brown, A. M., "High Frequency Fatigue of Turbine Blade Material," AFVVAL-TR-82-4151, Wright-Patterson AFB, OH, October 1982.
12. Guedou, J. Y. and Rongvaux, J. M., "Effect of Superimposed Stresses at High Frequency on Low Cycle Fatigue," Low Cycle Fatigue, ASTM STP 942, American Society for Testing and Materials, Philadelphia, PA., 1988, pp. 938-960.
13. Powell, B. E., Duggan, T. V., and Jeal, R., "The Influence of Minor Cycles on Low Cycle Fatigue Crack Propagation," International Journal of Fatigue, Vol. 4, 1982, pp. 4-14.
14. Powell, B. E., Henderson, I., and Duggan, T. V., "The Effect of Combined Major and Minor Stress Cycles on Fatigue Crack Growth," Second International Congress on Fatigue (Fatigue '84), 1984, pp. 893-902.
15. Hawkyard, M., Powell, B. E., Hussey, I. and Grabowski, L., "Fatigue Crack Growth under Conjoint Action of Major and Minor Stress," Fatigue & Fracture of Engineering Materials & Structures, Vol. 19, 1996, pp. 217-227.
16. Hall, R. F. and Powell, B. E., "The Effects of LCF Loadings on HCF Crack Growth," US AFOSR Annual Report for Phase II, Report Number F567, University of Portsmouth, England, May 1999.
17. Hopkins, S. W., Rau, C. A., Leverant, G. R., and Yuen, A., "Effect of Various Programmed Overloads on the Threshold for High-Frequency Fatigue Crack Growth," Fatigue Crack Growth Under Spectrum Loads, ASTM STP 595, American Society for Testing and Materials, Philadelphia, 1976, pp. 125-141.
18. Petrak, G. J. and Gallagher, J. P., "Predictions of the Effect of Yield Strength on Fatigue Crack Growth Retardation in HP-9NI-4Co-30C Steel," Journal of Engineering Materials and Technology, Vol. 97, 1975, pp. 206-213.
19. Gallagher, J. P. and Stalnaker, H. D., "Predicting Flight by Flight Crack Growth Rates," Journal of Aircraft, Vol. 12, 1975, pp. 699-705.
20. Ritchie, R. O., "Small Cracks and High Cycle Fatigue," Proceedings of the ASME Aerospace Division, J. C. I. Chang, Ed., AMD-Vol. 52, ASME, New York, NY, 1996, pp. 321-333.
21. Ritchie, R. O., Boyce, B. L., Campbell, J. P., Roder, O., Thompson, A. W., and Milligan, W. W., "Thresholds for High-Cycle Fatigue in a Turbine Engine Ti-6A1-4V Alloy," International Journal of Fatigue, Vol. 21, 1999, pp. 653-662.
22. Campbell, J. P., Thompson, A. W., and Ritchie, R. O., "Mixed-Mode Crack-Growth Thresholds in Ti-6AL-4V under Turbine-Engine High-Cycle Fatigue Loading Conditions," 4th National Turbine Engine High Cycle Fatigue Conference, USAF, Monterey, CA, 1999.
23. Standard Test Method for Measurement of Fatigue Crack Growth Rates, Annual Book of ASTM Standards, ASTM E 647-95a, 1995, pp. 562-599.
24. Kalluri, S. and Telesman, J., "Characterization of Fatigue Crack Initiation and Propagation in Ti6A1-4V with Electrical Potential Drop Technique," NASA Technical Memorandum 100877, Cleve-land, OH, July 1988.
25. Ghonem, H. and Rosenberger, A., "Results from the Experimental Calibration of a DC Electrical Potential Drop System for the Measurement of Surface Flaws," University of Rhode Island, Kingston, RI, October, 1989.
26. Mom, A. J. A. and Raizenne, M. D., "AGARD Engine Disc Cooperative Test Programme," AGARD R-766, 1988.
27. Ravichandran, K. S. and Larsen, J. M., "An Approach to Measure the Shapes of Three-Dimensional Surface Cracks During Fatigue Crack Growth," Fatigue & Fracture of Engineering Materials and Structures, Vol. 16, 1993, pp. 909-930.
28. Ravichandran, K. S. and Larsen, J. M., "Behavior of Small and Large Fatigue Cracks in Ti-24A1-11Nb: Effects of Crack Shape, Microstructure, and Closure," Fracture Mechanics: 22nd Symposium, ASTM STP 1131, H. A. Ernst, A. Saxena, and D. L. McDowell, Eds., American Society for Testing and Materials, Philadelphia, PA, 1992, pp. 727-748.
29. Maxwell, D. C. and Nicholas, T., "A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue," Fatigue and Fracture Mechanics: 29th Volume, ASTM STP 1321, T. L. Panontin and S. D. Sheppard, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1999, pp. 626-641.
30. Nicholas, T. and Maxwell, D. C, "Evolution and Effects of Damage in Ti-6A1-4V under High Cycle Fatigue," Progress in Mechanical Behaviour of Materials, Proceedings of the Eighth Inter-national Conference on the Mechanical Behaviour of Materials, ICM-8, F. Ellyin and J. W. Provan, Eds., Vol. III, 1999, pp. 1161-1166.
31. Bellows, R. S., Muju, S., and Nicholas, T., "Validation of the Step Test Method for Generating Haigh Diagrams for Ti-6A1-4V," International Journal of Fatigue, Vol. 21, 1999, pp. 687-697.
32. Bellows, R. S., Bain, K. R., and Sheldon, J. W., "Effect of Step Testing and Notches on the Endurance Limit of Ti-6A1-4V," Mechanical Behavior of Advanced Materials, MD - Vol. 84, D. C. Davis et al., Eds., ASME, New York, 1998, pp. 27-32.
33. Vitovec, F. H. and Lazan, B. J., "Strength, Damping and Elasticity of Materials Under Increasing Reversed Stress with Reference to Accelerated Fatigue Testing," ASTM Proceedings, Vol. 55, American Society for Testing and Materials, 1955, pp. 844-862.
34. Vasserman, N. N., Gladkovskii, V. A., Lukyanov, O. P., Kozlov, I. V., and Zgogurin, V. V., "Investigation of the Cyclic Strength of VT6 Titanium Alloy," Strength of Materials, Vol. 8, 1976, pp. 1288-1293.
35. Frost, N. E., "Notch Effects and the Critical Alternating Stress Required to Propagate a Crack in an Aluminum Alloy Subject to Fatigue Loading," J. Mech. Eng. Sci., Vol. 2, 1960, pp. 109-119.
36. Sadananda, K., Vasudevan, A. K., Holtz, R. L., and Lee, E. U., "Analysis of Overload Effects and Related Phenomena," International Journal of Fatigue, Vol. 21, 1999, pp. S233-S246.
37. Kitagawa, H. and Takahashi, S., "Applicability of Fracture Mechanics to Very Small Cracks or the Cracks in the Early Stage," Proceedings of the Second International Conference on Mechanical Behaviour of Materials, Boston, MA, 1976, pp. 627-631.