Mechanics of fretting fatigue crack formation

Wear

Volumn 198, Issue 1-2, 1996, Pages 93-107

  Szolwinski, Matthew P ^a   Farris, Thomas N ^a  

^a Purdue University   (United States)

Author keywords

Crack nucleation; Fatigue; Fretting; Multiaxial fatigue

Indexed keywords

CRACK INITIATION; CRACKS; FATIGUE OF MATERIALS; FRICTION; LOADS (FORCES); MATHEMATICAL MODELS; MECHANICS; STRAIN;

AIRCRAFT LAP JOINTS; FRETTING FATIGUE CRACK FORMATION; FRETTING FATIGUE CRACK NUCLEATION THEORY; FRICTION COEFFICIENT; LOAD INTENSITY; MULTIAXIAL FATIGUE THEORY; STRAIN LIFE; SURFACE MICROSLIP; TWO DIMENSIONAL ELASTIC STRESS FIELD;

FRETTING CORROSION;

FATIGUE CRACKS; FRETTING;

EID: 0030267936     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/0043-1648(96)06937-2     Document Type: Article

References (55)

1. C. Ruiz, P.H.B. Boddington and K.C. Chen, An investigation of fatigue and fretting in a dovetail joint, Experimental Mechanics, 24 (3) (1984) 208-217.
2. P.L. Hurricks, Mechanism of fretting, Wear, 15 (1970) 389-409.
3. R.B. Waterhouse and D.E. Taylor, The initiation of fatigue cracks in a 0.7% carbon steel by fretting, Wear, 17 (1971) 139-147.
4. R.B. Waterhouse, Fretting Corrosion, Pergamon Press, Oxford, 1972.
5. Y. Berthier, L. Vincent and M. Godet, Fretting fatigue and fretting wear, Tribol. Int., 22 (1989) 235-242.
6. K. Nishioka and K. Hirakawa, Fundamental investigations of fretting fatigue, part 3, Bull. JSME, 12 (51) (1969) 397-407.
7. K. Endo and H. Goto, Initiation and propagation of fretting fatigue cracks, Wear, 38 (1976) 311-324.
8. D.A. Hills, D. Nowell and J.J. O'Connor, On the mechanics of fretting fatigue, Wear, 125 (1988) 129-146.
9. J.A. Alic, A.L. Hawley and J.M. Urey, Formation of fretting fatigue cracks in 7075-T7351 aluminum alloy, Wear, 56 (1979) 351-361.
10. O. Vingsbo and S. Söderberg, On fretting maps, Wear, 126 (1988) 131-147.
11. D.W. Hoeppner, Mechanisms of fretting-fatigue and their impact on test methods development, in Standardization of Fretting Fatigue Test Methods and Equipment, ASTM, Philadelphia, 1992, pp. 23-32.
12. J. Rollins, J. Price, R. King, R. Grove and J. Bjeletich, Redesign of the EUROSTAR propellant management device screen supports to prevent screen wire failure from fretting fatigue, Proc. 25th Joint Propulsion Conference, AIAA/ASME/SAE/ASEE, July 1989.
13. B.J. Kalb, Friction stresses between blade and disk dovetail possible case of numerous dovetail problems, Proc. USAF Structural Integrity Conference, 1991.
14. R.B. Waterhouse, Fretting fatigue in aqueous electrolytes, in Fretting Fatigue, Applied Science, London, 1981, pp. 159-176.
15. Unknown, USAF aging aircraft program, Aerospace Engineering, October 1994, pp. 11-13.
16. J.W. Lincoln, Life management approach for USAF aircraft, AGARD Conference Proceedings 506, volume paper 17, Dec. 1991.
17. J. Cole and S. Carey, Jurassic jets, Wall Street J., LXXV (15), 1994.
18. J. Schijve, Multiple-site-damage fatigue of riveted joints, in Durability of Metal Aircraft Structures, International Workshop on Structural Integrity of Aging Airplanes, 1992, pp. 2-27.
19. K. Iyer, G.T. Hahn, P.C. Bastias and C.A. Rubin, Analysis of fretting conditions in pinned connections, Wear, 181-183 (1995) 524-530.
20. D.A. Hills and D. Nowell, Mechanics of Fretting Fatigue, Kluwer, Deventer, 1994.
21. G. Lundberg and A. Palmgren, Dynamic capacity of rolling bearings, Acta Polytechnica-Mech. Eng. Series 1, 1 (3) (1947) 4-51.
22. K. Dang Van, B. Griveau and O. Message, On a new multiaxial fatigue limit criterion: Theory and application, in Biaxial and Multiaxial Fatigue, ASTM, Philadelphia, 1985, pp. 479-496.
23. K. Nishioka and K. Hirakawa, Fundamental investigations of fretting fatigue, part 2, Bulletin of JSME, 12(50) (1969) 180-187.
24. D. Socie, Critical plane approaches for multiaxial fatigue damage assessment, in Advances in Multiaxial Fatigue - ASTM STP 1191, ASTM, Philadelphia, 1993, pp. 7-36.
25. D.A. Hills, Mechanics of fretting fatigue, Wear, 175 (1994) 107-113.
26. D. Nowell and D.A. Hills, Mechanics cf fretting fatigue tests, Int. J. Mech. Sci., 29 (5) (1987) 355-365.
27. S. Adibnazari and D. Hoeppner, The role of normal pressure in modelling fretting fatigue, in R.B. Waterhouse and T.C. Lindley (eds.), Fretting Fatigue, Mechanical Engineering Publications, London, 1994, pp. 125-133.
28. R.B. Waterhouse, Introduction to fatigue, in Fretting Fatigue, Applied Science, London, 1981, pp. 1-21.
29. K. Sato, H. Fujii and S. Kodama, Crack propagation behaviour in fretting fatigue, Wear, 107 (1986) 245-262.
30. D. Nowell and D.A. Hills, Crack initiation criteria in fretting fatigue, Wear, 136 (1990) 329-343.
31. M. Kuno, R.B. Waterhouse, D. Nowell and D.A. Hills, Initiation and growth of fretting fatigue cracks in the partial slip regime, Fatigue Fract. Eng. Mater. Struct., 12 (5) (1989) 387-398.
32. S. Faanes and U.S. Fernando, Life prediction in fretting fatigue using fracture mechanics, in R.B. Waterhouse and T.C. Lindley (eds.), Fretting Fatigue, Mechanical Engineering Publications, London, 1994, pp. 149-159.
33. K. Nishioka, S. Nishimura and K. Hirakawa, Fundamental investigations of fretting fatigue, part 1, Bull. JSME, 11 (45) (1968) 437-445.
34. J.A. Bannantine, J.J. Comer and J.L. Handrock, Fundamentals of Metal Fatigue Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1990.
35. A. Fatemi and D.F. Socie, A critical plane approach to multiaxial fatigue damage including out-of-phase loading, Fatigue Fract. Eng. Mater. Struct., 11 (3) (1988) 149-165.
36. W.N. Findley, J.J. Coleman and B.C. Hanley, Theory for combined bending and torsion fatigue with data for SAE 4340 steel, Proc. International Conference on Fatigue of Metals, Institution of Mechanical Engineers, ASME, 1956, pp. 150-157.
37. W.N. Findley, A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending, Journal of Engineering for Industry (Nov 1959) 301-307.
38. P.J.E. Forsyth, A two-stage process of fatigue crack growth, in Proc. Symp. Crack Propagation, Cranfield, England, 1961, pp. 76-94.
39. L.F. Coffin, Jr., A study of the effects of cyclic thermal stresses on a ductile metal, Trans. ASME, 76 (1954) 931-950.
40. S.S. Manson, Behavior of materials under conditions of thermal stress, Technical Report TN 2933, NACA, 1953.
41. K.N. Smith, P. Watson and T.H. Topper, A stress-strain function for the fatigue of metals, J. Mater., 5 (4) (1970) 767-778.
42. D. Socie, Multiaxial fatigue damage models, J. Eng. Mater. Technol., 109 (1987) 292-298.
43. T.C. Lindley and K.J. Nix, The role of fretting in the initiation and early growth of fatigue cracks in turbo-generator materials, in Multiaxial Fatigue, ASTM, 1985, pp. 340-360.
44. G.J. Moyar, A critique of rolling contact fatigue criteria for bearing rings with hoop stresses, in STLE Preprint 94-TC-5D-1, STLE, Oct. 1994.
45. K.L. Johnson, Contact Mechanics, Cambridge University Press, Cambridge, 1985.
46. R.D. Mindlin, Compliance of elastic bodies in contact, J. Appl. Mech., (1949) 259-268.
47. R.D. Mindlin and H. Deresiewicz, Elastic spheres in contact under oblique forces, J. Appl. Mech., (Sept. 1953) 327-344.
48. H.M. Westergaard, Bearing pressures and cracks, J. Appl. Mech., (Jun 1939) A49-A53.
49. M.P. Szolwinski and T.N. Farris, Fretting fatigue crack initiation: Aging aircraft concerns, Proc. 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference-Part 4, Apr. 1993, AIAA-94-1591-CP.
50. R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, Wiley, New York, 1976.
51. L.M. Keer, M.D. Bryant and G.K. Haritos, Subsurface and surface cracking due to Hertzian contact, J. Lubr. Technol., 104 (1982) 347-351.
52. P.C. Paris and F. Erdogan, A critical analysis of crack propagation laws, J. Basic Eng., D85 (1963) 528-534.
53. V. Sedláček, M. Ruščák and J. Čmakal, Initiation of fatigue cracks in aluminum alloys, in P. Lukáš and J. Polák (eds.), Basic Mechanisms in Fatigue of Metals, Institute of Physical Metallurgy, Czechoslovak Academy of Sciences, Brno, Czechoslovakia, 1988, pp. 73-81.
54. C. Petiot, L. Vincent, K. Dang Van, N. Maouche, J. Foulquier and B. Journet, An analysis of fretting-fatigue failure combined with numerical calculations to predict crack nucleation, Wear, 181-183 (1995) 101-111.
55. K. Dang Van and M.H. Maitournam, Elasto-plastic calculations of the mechanical state in reciprocating moving contacts: Application to fretting fatigue, in R.B. Waterhouse and T.C. Lindley (eds.), Fretting Fatigue, Mechanical Engineering Publications, London, 1994, pp. 161-168.