Role of foreign-object damage on thresholds for high-cycle fatigue in Ti-6AI-4V

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 31, Issue 6, 2000, Pages 1571-1583

  Peters, J O ^a   Roder, O ^a   Boyce, B L ^b   Thompson, A W ^a   Ritchie, R O ^a  

^a Lawrence Berkeley National Laboratory   (United States)

^b DAIMLER AG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CRACK INITIATION; CRACK PROPAGATION; FAILURE ANALYSIS; FATIGUE OF MATERIALS; MICROCRACKS; PLASTIC DEFORMATION; RESIDUAL STRESSES; STRENGTH OF MATERIALS; STRESS CONCENTRATION; TURBOMACHINE BLADES; VELOCITY MEASUREMENT;

FAN BLADE ALLOY; FOREIGN OBJECT DAMAGE; HIGH CYCLE FATIGUE; TENSILE RESIDUAL HOOP STRESSES; TITANIUM ALUMINUM VANADIUM;

TITANIUM ALLOYS;

EID: 0034207388     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-000-0167-2     Document Type: Article

References (50)

1. B.A. Cowles: Int. J. Fract., 1996, vol. 80, pp. 147-63.
2. T. Nicholas and J.R. Zuiker: Int. J. Fract., 1996, vol. 80, pp. 219-35.
3. J.M. Larsen, B.D. Worth, C.G. Annis, Jr., and F.K. Haake: Int. J. Fract., 1996, vol. 80, pp. 237-55.
4. R.O. Ritchie: Proc. ASME Aerospace Division, J.C.I. Chang, J. Coulter, D. Brei, W.H.G. Martinez, and P.P. Friedmann, eds., ASME, Fairfield, NJ, 1996, AD-vol. 52, pp. 321-33.
5. Erosion, Corrosion and Foreign Object Damage Effects in Gas Turbines, AGARD Conf. Proc. No. 558, North Atlantic Treaty Organization, Advisory Group for Aerospace Research and Development, Propulsion and Energetics Panel, Neully-sur-Seine, France, 1994.
6. T. Nicholas, J.R Barber, and R.S. Bertke: Exp. Mech., 1980, Oct., pp 357-64.
7. S.J. Hudak, Jr., G.G. Chell, T.S. Rennick, R.C. McClung, and D.L. Davidson: Proc. 4th Nat. Turbine Engine HCF Conf., CD Rom, Session 10, Materials Damage Tolerance IV, 1999, pp. 7-17.
8. P. Graven, R. Bellows, T. Dunyak, D. Herrmann, and S. Hudak, Jr.: Proc. 4th Nat. Turbine Engine HCF Conf., CD Rom, Session 10, Materials Damage Tolerance IV, 1999, pp. 1-6.
9. O. Roder, J.O. Peters, B.L. Boyce, A.W. Thompson, and R.O. Ritchie: Proc. 4th Nat. Turbine Engine HCF Conf., CD Rom, Session 10, Materials Damage Tolerance IV, 1999, pp. 41-50.
10. R.O. Ritchie, D.L. Davidson, B.L. Boyce, J.P. Campbell, and O. Roder: Fat. Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 621-31.
11. N.B. Frost: Proc. Inst. Mech. Eng., 1959. vol. 173, pp. 811-27.
12. N.E. Dowling: Fat. Eng. Mat. Struct., 1979, vol. 2, pp. 129-39.
13. M.H. El Haddad, T.H. Topper, and K.N. Smith: Eng. Fract. Mech., 1979, vol. 11, pp. 573-84.
14. T.S. Harding, J.W. Jones, P.S. Steiff, and T.M. Pollock: Scripta Mater., 1999, vol. 40, pp. 445-49.
15. J.L. Hamrick II, S. Mall, and T. Nicholas: Proc. 4th Nat. Turbine Engine HCF Conf., CD Rom, Session 8, Materials Damage Tolerance IV, 1999, pp. 38-48.
16. V. Gros, B.A. Taweel, M. Ceretti, C. Prioul, and A. Lodini: Proc. 4th Eur. Conf. on Residual Stresses, S. Denis, J.-L. Lebrun, B. Bourniquel, M. Barrai, and J.-F. Flavenot, eds., SF2M, ENSAM, Cluny en Bourgogne, France, 1996, pp. 567-75.
17. J.J. Ruschau, S.R. Thompson, J.J. Kleck, and T. Nicholas: Proc. 4th Nat. Turbine Engine HCF Conf., CD Rom, Session 8, Materials Damage Tolerance IV, 1999, pp. 28-37.
18. K.-P. Hornauer, H.H. Jühe, A. Klinkenberg, and P. Starker: Härtereitechnische Mitteilungen, 1981, vol. 36, pp. 322-26.
19. M. Kobayashi, T. Matsui, and Y. Murakami: Int. J. Fatigue, 1998, vol. 20, pp. 351-57.
20. G.B. Sinclair, P.S. Follansbee, and K.L. Johnson: Int. J. Solids Struct., 1985, vol. 21, pp. 865-88.
21. X. Chen and J.W. Hutchinson: "Foreign Object Damage and Fatigue Cracking on the Shallow Indentation," Harvard University Report No. ME 358, Cambridge, MA, Nov. 1999.
22. C. Hardy, C.N. Baronet, and G.V. Tordion: Int. J. Num. Meth. Eng., 1971, vol. 3, pp. 451-62.
23. C.J. Studman and J.E. Field: J. Mater. Sci., 1977, vol. 12, pp. 215-18.
24. G. Lutjering: Mater. Sci. Eng., 1998, vol. A243, pp. 32-45.
25. A.W. Thompson: in Fatigue Behavior of Titanium Alloys, R.R. Boyer, D. Eylon, and G. Lutjering, eds., TMS, Warrendale, PA, 1999, pp. 23-31.
26. W.J. Evans: Mater. Sci. Eng., 1999, vol. A263, pp. 160-75.
27. L. Wagner and G. Lutjering: Proc. 2nd Int. Conf. Shot Peening, H.O. Fuchs, ed., American Shot Peening Society, Paramus, NJ, 1984, pp. 194-200.
28. L. Wagner and G. Lutjering: Proc. 2nd Int. Conf. Shot Peening, H.O. Fuchs, ed., American Shot Peening Society, Paramus, NJ, 1984, pp. 201-07.
29. H. Gray, L. Wagner, and G. Lutjering: in Shot Peening, H. Wohlfahrt, R. Kopp, and O. Vöhringer, eds., DGM, Oberursel, Germany, 1987, p. 467.
30. D. Eylon: "Summary of the Available Information on the Processing of the Ti-6Al-4V HCF/LCF Program Plates," University of Dayton Report, University of Dayton, Dayton, OH, 1998.
31. J.C. Newman, Jr. and I.S. Raju: Eng. Fract. Mech., 1981, vol. 15, pp. 185-92.
32. J.M. Morgan and W.W. Milligan: in High Cycle Fatigue of Structural Materials, W.O. Soboyejo and T.S. Srivatsan, eds., TMS, Warrendale, PA, 1997, pp. 305-12.
33. R.O. Ritchie and W. Yu: in Small Fatigue Cracks, R.O. Ritchie and J. Lankford, eds., TMS, Warrendale, PA, 1986, pp. 167-89.
34. A. Coles, R.E. Johnson, and H.G. Popp: J. Eng. Mater. Technol, 1976, pp. 305-15.
35. M. Nisida and P. Kim: Pwc. 12th Nat. Congr. Applied Mechanics, 1962, pp. 69-74.
36. P. Lukáš: Eng. Fract. Mech., 1987, vol. 26, pp. 471-73.
37. I.M. Hutchings: in Materials Behavior under High Stress and Ultra High Loading Rates, J. Mescall and V. Weiss, eds., Plenum Press, New York, NY, 1983, pp. 161-96.
38. S.P. Timothy and I.M. Hutchings: Acta Metall., 1985, vol. 33, pp. 667-76.
39. S.P. Timothy and I.M. Hutchings: Eng. Fract. Mech., 1984, vol 7, pp. 223-27.
40. S.P. Timothy and I.M. Hutchings: Proc. of the 3rd Conf. on the Mechanical Properties of Materials at High Rates of Strain, The Institute of Physics, London, 1984, pp. 397-404.
41. J.A. Hines, J.O. Peters, and G. Lutjering: in Fatigue Behavior of Titanium Alloys, R.R. Boyer, D. Eylon, and G. Lutjering, eds., TMS, Warrendale, PA, 1999, pp. 15-22.
42. J. Goodman: Mechanics Applied to Engineering, Longmans, Green Si Co., Ltd., London, 1899.
43. Small Fatigue Cracks, R. O. Ritchie and J. Lankford, eds., TMSAIME, Warrendale, PA, 1986.
44. The Behaviour of Short Fatigue Cracks, K.J. Miller and E.R. de los Rios, eds., The Mechanical Engineering Publishing Ltd., London, 1986.
45. Short Fatigue Cracks, K.J. Miller and E.R. de los Rios, eds., The Mechanical Engineering Publishing Ltd., London, 1992.
46. R.O. Ritchie and J. Lankford: Mater. Sci. Eng., 1986, vol. 84, pp. 11-16.
47. R.O. Ritchie, B.L. Boyce, J.P. Campbell, O. Roder, A.W. Thompson, and W.W. Milligan: Int. J. Fatigue, 1999, vol. 21, pp. 653-62.
48. J.A. Hines, J.O. Peters, and G. Lutjering: Proc. 9th World Congr. on Titanium, I. Gorynin, ed., TMS, Warrendale, PA, 1999, in press.
49. J.O. Peters, A. Gysler, and G. Lutjering: Proc. ICAA-6, Aluminum Alloys, T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, eds., Japan Inst. Light Metals, Tokyo, Japan, 1998, vol. 3, pp. 1427-32.
50. J.O. Peters, A. Gysler, and G. Lutjering: Fatigue '99, Proc. 7th Int. Congr. on Fatigue, X.-R. Wu and Z.-G. Wang, eds., Higher Education Press, Beijing/EMAS Ltd., Warley, United Kingdom, 1999, vol. 2, pp. 1009-14.