4.11 - Fretting Fatigue

Comprehensive Structural Integrity: Nine Volume Set

Volumn 1-9, Issue , 2003, Pages 281-326

  Farris, T N ^a   Murthy, H ^b   Matlik, J F ^c  

^a RUTGERS UNIVERSITY   (United States)

^b INDIAN INSTITUTE OF TECHNOLOGY MADRAS   (India)

^c ROLLS ROYCE CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85146795394     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B0-08-043749-4/04080-5     Document Type: Chapter

References (94)

1. J.A. Alic, A.L. Hawley and J.M. Urey (1979) Formation of fretting fatigue cracks in 7075-T7351 aluminum alloy. Wear 56 351-361.
2. M.H. Attia (1994) Friction-induced thermo-elastic effects in the contact zone due to fretting action. R.B. Waterhouse, T.C. Lindley (Eds) Fretting Fatigue, ESIS18 London: Mechanical Engineering Publications 307-319.
3. J.R. Barber (1992) Elasticity Dordrecht The Netherlands: Kluwer Academic
4. S.B. Batdorf and H.L. Heinisch (1978) Weakest link theory reformulated for arbitrary failure criterion. J. Am. Cer. Soc. 61(7–8), 355-358.
5. B.A. Boley and J.H. Weiner (1960) Theory of Thermal Stresses USA: Wiley
6. C. Boller and T. Seeger (1987) Materials Data for Cyclic Loading: Part D. Aluminum and Titanium Alloys Amsterdam: Elsevier
7. R. Bramhall, 1973, Studies in fretting fatigue. Ph.D. thesis, Oxford University.
8. M. Ciavarella, D.A. Hills and G. Monno (1998) The influence of rounded edges on indentation by a flat punch. Proc. Inst. Mech. Eng., Part C. J. Mech. Eng. Sci. 212(4), 319-328.
9. J.J.M. de Rijck and S.A. Fawaz (2001) Stress intensity factors and crack interaction in adjacent holes. Eng. Fract. Mech. 68(7), 963-969.
10. J.M. Dobromirski (1992) Variables of fretting process: are there 50 of them? M.H. Attia, R.B. Waterhouse (Eds) Standardization of Fretting Fatigue: Test Methods and Equipment, ASTM STP 1159 Philadelphia, PA: American Society of Testing and Materials 60-66.
11. M. Doner, K.R. Bain and J.H. Adams (1982) Evaluation of methods for the treatment of mean stress effects on low-cycle fatigue. J. Eng. Power 104 403-411.
12. J. Dundurs and M. Comninou (1979) Some consequences of the inequality conditions in contact and crack problems. J. Elasticity 9(1), 71-82.
13. P.R. Edwards (1981) The application of fracture mechanics to predicting fretting fatigue. R.B. Waterhouse (Eds) Fretting Fatigue London: Applied Science 67-98. chap. 3
14. K. Endo (1981) Practical observations of initiation and propagation of fretting fatigue cracks. R.B. Waterhouse (Eds) Fretting Fatigue London: Applied Science 127-142. chap. 5
15. K. Endo and H. Goto (1976) Initiation and propagation of fretting fatigue cracks. Wear 38 311-324.
16. K. Endo, H. Goto and T. Fukunaga (1974) Behaviors of frictional force in fretting fatigue. Bull. JSME 17(108), 647-654.
17. F. Erdogan, and G.D. Gupta, (1972) On the numerical solutions of singular integral equations. Quarterly J. Appl. Mathematics 29(4), 525-534.
18. T.N. Farris (1992) Mechanics of fretting fatigue tests of contacting dissimilar elastic bodies. STLE, Tribol. Trans. 35 346-352.
19. T.N. Farris, A.F. Grandt, G. Harish and H.L. Wang (1996) Analysis of widespread fatigue damage in structural joints. G. Schmitt, J. Bauer, C.J. Magurany, C. Hurley, H. Kliger (Eds) 41st International SAMPE Symposium and Exhibition vol. 41 Anaheim: SAMPE 65-79.
20. T.N. Farris, M.P. Szolwinski and G. Harish (2000) Fretting in aerospace structures and materials. D.W. Hoeppner, V. Chandrasekaran, C.B. Elliott (Eds) Fretting Fatigue: Current Technology and Practices, STP 1367 West Conshohocken, PA: ASTM 523-537.
21. L.J. Fellows, D. Nowell and D.A. Hills (1997) On the initiation of fretting fatigue cracks. Wear 205 120-129.
22. D. B. Garcia and A. F. Grandt, 2003, Fractographic characteristics associated with fretting fatigue cracks in turbomachinery alloys. In: “Proc. 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference,” Norfolk, VA.
23. H.M. Ghasemi, M.J. Furey and C. Kajdas (1993) Surface temperatures and fretting corrosion of steel under conditions of fretting contact. Wear 162–164 357-369.
24. A.E. Giannakopoulos, T.C. Lindley and S. Suresh (1998) Aspects of equivalence between contact mechanics and fracture mechanics: theoretical connections and a life prediction methodology for fretting fatigue. Acta Mater. 46(9), 2955-2968.
25. A.E. Giannakopoulos, T.C. Lindley, S. Suresh and C. Chenut (2000) Similarities of stress concentrations in contact at round punches and fatigue at notches: implications to fretting fatigue crack initiation. Fatigue Fract. Eng. Mater. Struct. 23 561-571.
26. A.E. Giannakopoulos and S. Suresh (1997) A three-dimensional analysis of fretting fatigue. Acta Mater. 46(1), 177-192.
27. G.M.L. Gladwell (1980) Contact Problems in the Classical Theory of Elasticity Germantown, Maryland: Sijthoff and Noordhoff
28. P. J. Golden, 2001, High cycle fatigue of fretting induced cracks. Ph.D. thesis, Purdue University, West Lafayette.
29. G. Harish and T.N. Farris (1998) Shell modeling of fretting in riveted lap joints. AIAA J. 36(6), 1087-1093.
30. G. Harish and T. N. Farris, 1999, An integrated approach for prediction of fretting crack nucleation in riveted lap joints. In: “Collection of Technical Papers. 40th AIAA, ASME, ASCE/AHS Structures, Structural Dynamics and Materials Conference,” St. Louis, Missouri, vol. 2, pp. 1219–1226.
31. G. Harish, M.P. Szolwinski, T.N. Farris and T. Sakagami (2000) Evaluation of fretting stresses through full-field temperature measurements. D.W. Hoeppner, V. Chandrasekaran, C.B. Elliott (Eds) Fretting Fatigue: Current Technology and Practices, STP 1367 West Conshohocken, PA: American Society for Testing and Materials 423-435.
32. W.J. Harris (1961) Metallic Fatigue New York: Pergamon
33. A. Hartman, 1968, “The Influence of Manufacturing Procedures on the Fatigue Life of 2024-t3 Clad Riveted Single Lap Joints,” Technical report NLR TR 68072 U, Nationaal Lucht-En Ruimtevaartlaboratorium (NLR), The Netherlands.
34. T. Hattori, M. Nakamura, H. Sakata and T. Watanabe (1988) Fretting fatigue analysis using fracture mechanics. JSME Int. J. Series I 31(1), 100-107.
35. R.B. Heywood (1962) Designing against the Fatigue of Metals Norwich, Great Britain: Jarold and Sons
36. D.A. Hills (1994) Mechanics of fretting fatigue. Wear 175 107-113.
37. D.A. Hills and D. Nowell (1992) The development of a fretting fatigue experiment with well-defined characteristics. M.H. Attia, R.B. Waterhouse (Eds) Standardization of Fretting Fatigue: Test Methods and Equipment, ASTM STP 1159 Philadelphia, PA: American Society of Testing and Materials 69-84.
38. D.A. Hills and D. Nowell (1994) Mechanics of Fretting Fatigue The Netherlands: Kluwer Academic
39. D.A. Hills, D. Nowell and A. Sackfield (1993) Mechanics of Elastic Contacts Oxford, Great Britain: Butterworth-Heinemann
40. D. W. Hoeppner, C. B. I. Elliot and M. W. Moesser, 1996, “The Role of Fretting Fatigue on Aircraft Rivet Hole Cracking,” Technical report DOT/FAA/AR-96/10, Federal Aviation Administration, Salt Lake City, UT.
41. S. Hucker, J. Mann and T. N. Farris, 1996, Thermal aspects of grinding with superabrasives: Part i and ii. Abrasives Mag., 24–27.
42. A.L. Hutson, T. Nicholas and R. Goodman (1999) Fretting fatigue of Ti–6Al–4V under flat-on-flat contact. Int. J. Fatigue 21 663-669.
43. K. Iyer, G.T. Hahn, P.C. Bastias and C.A. Rubin (1995) Analysis of fretting conditions in pinned connections. Wear 181–183(2), 524-530.
44. J. Jäger (1997) Half-planes without coupling under contact loadings. Archive Appl. Mech. 67 247-259.
45. K.L. Johnson (1985) Contact Mechanics Cambridge, UK: Cambridge University Press
46. L.N. Karpenko (1966) Approximate solution of a singular integral equation by means of Jacobi polynomials. J. Appl. Mathematics Mech. 30(3), 668-675.
47. F.E. Kennedy (1980) Thermomechanical phenomena in high speed rubbing. Wear 59 149-163.
48. K. Kondoh and Y. Mutoh (2000) Crack behavior in the early stage of fretting fatigue fracture. D.W. Hoeppner, V. Chandrasekaran, C. Elliott (Eds) Fretting Fatigue: Current Technology and Practices, STP 1367 West Longhohoeken, PA: ASTM 282-292.
49. P. Kuhn (1956) Fatigue engineering in aircraft. A.M. Freudenthal (Eds) Fatigue in Aircraft Structures New York: Academic Press 295-316.
50. R.D. Kurtz, T. Farris and C. Sun (1994) The numerical solution of Cauchy singular integral equations with application to fracture. Int. J. Fract. 66 139-154.
51. S.G. Lekhnitskii (1981) Theory of Elasticity of an Anisotropic Body Moscow, USSR: MIR Publishers
52. T.C. Lindley (1997) Fretting fatigue in engineering alloys. Int. J. Fatigue 19(1), S39-S49.
53. J.F. Matlik and T.N. Farris (2003) Development of test methods for high frequency fretting fatigue. Y. Mutoh, S. Kinyon, D. Hoeppner (Eds) Fretting Fatigue: Advances in Basic Understanding and Applications, ASTM STP 1425 West Conshohocken, PA: ASTM International 251-272.
54. P.A. McVeigh and T.N. Farris (1997) Finite element analysis of fretting stresses. J. Tribol. 119 797-801.
55. P.A. McVeigh, G. Harish, T.N. Farris and M.P. Szolwinski (1999) Modeling interfacial conditions in nominally flat contacts for application to fretting fatigue of turbine engine components. Int. J. Fatigue S1 157-165.
56. MIL-HDBK-5G 1994, “Metallic Material and Elements for Aerospace Vehichle Structures,” Defense Printing Service Detachment Office, Philadelphia, PA, Vol. 1.
57. R.D. Mindlin (1949) Compliance of elastic bodies in contact. J. Appl. Mech. 16(3), 259-268.
58. A. Moftakhar, A. Buczynski and G. Glinka (1995) Calculation of elasto-plastic strains and stresses in notches under multiaxial loading. Int. J. Fract. 70 357-373.
59. R.P.G. Muller, G. Roebrooks and J.W. Bridge (1995) Corrosion fatigue of aluminum and glare riveted lap joint. Struct. Integrity Aging Aircraft—ASME Aerospace Div. 47 315-324.
60. H. Murthy, G. Harish and T. Farris (2003) Efficient modeling of fretting of blade/disk contacts including load history effects. J. Tribol. 125 1-9. ASME
61. H. Murthy, P. Rajeev, T. N. Farris and D. C. Slavik, 2001, Fretting fatigue of Ti–6Al–4V subjected to blade/disk contact loading. “Developments in Fracture Mechanics for the New Century, 50th Anniversary of Japan Society of Materials Science,” eds. K. Kishimoto, S. Kubo, T. Nakamura and T. Sakagami, pp. 41–48.
62. H. Murthy, P.T. Rajeev, M. Okane and T.N. Farris (2003) Development of test methods for high temperature fretting of turbine materials subjected to engine-type loading. Y. Mutoh, S.E. Kinyon, D.W. Hoeppner (Eds) Fretting Fatigue: Advances in Basic Understanding and Applications, ASTM STP 1425 West Conshohocken, PA: ASTM International 273-289.
63. N.I. Muskhelishvili (1953) Singular Integral Equations P. Noordhoff: Groningen
64. National Research Council, Ca. 1997, “Aging of US Air Force Aircraft,” Technical report, National Research Council, Washington, DC.
65. K. Nishioka, S. Nishimura and K. Hirakawa (1968) Fundamental investigations of fretting fatigue, part 1. Bull. JSME 11(45), 437-445.
66. D. Nowell and D.A. Hills (1987) Mechanics of fretting fatigue tests. Int. J. Mech. Sci. 29(5), 355-365.
67. D. Nowell and D.A. Hills (1990) Crack initiation criteria in fretting fatigue. Wear 136 329-343.
68. J.J. O'Connor (1981) The role of elastic stress analysis in the interpretation of fretting fatigue failures. R.B. Waterhouse (Eds) Fretting Fatigue London: Applied Science 23-66. chap. 2
69. M. Okane, K. Shiozawa and T. Ishikura (2000) Fretting fatigue behavior of TiN-coated steel. D.W. Hoeppner, V. Chandrasekaran, C.B. Elliott (Eds) Fretting Fatigue: Current Technology and Practices, STP 1367 West Longhohoeken, PA: ASTM 465-476.
70. J.P. Pape and R.W. Neu (1999) Influence of contact configuration in fretting fatigue testing. Wear 225–229 1205-1214.
71. E. Pérez-Ruberté (2001) Elasto-plastic finite element analysis of contacts with applications to fretting fatigue. Master's Thesis W. Lafayette, IN: Purdue University
72. C. Petiot, L. Vincent, K. Dang Van, N. Maouche, J. Foulquier and B. Journet (1995) An analysis of fretting–fatigue failure combined with numerical calculations to predict crack nucleation. Wear 181–183 101-111.
73. R. S. Piascik and S. A. Willard, 1997, “The Characteristics of Fatigue Damage in the Fuselage Riveted Lap Splice Joint,” Technical report NASA/TP-97-206257, NASA Langley Research Center, Hampton, VA.
74. P.T. Rajeev and T.N. Farris (2002) Numerical analysis of fretting contacts of dissimilar isotropic and anisotropic materials. J. Strain Anal. 37(6), 503-517.
75. D.P. Rooke and T.J. Courtney (1989) The effect of final friction coefficient on fretting fatigue waveforms. Fatigue Fract. Eng. Mater. Struct. 12(3), 227-236.
76. C. Ruiz, P.H.B. Boddington and K.C. Chen (1984) An investigation of fatigue and fretting in a dovetail joint. Exp. Mech. 24(3), 208-217.
77. B. Schenk, P. J. Brehm, M. N. Menon, W. T. Tucker and A. D. Peratta, 2000, A new probabilistic approach for accurate fatigue data analysis of ceramic materials. J. Eng. Gas Turbines and Power, ASME, 122(4), 637–645.
78. D.A. Spence (1973) An eigenvalue problem for elastic contact with finite friction. Proc. Cambridge Phil. Soc. 73 249-268.
79. P. Stanley (1997) Applications and potential of thermoelastic stress analysis. J. Mater. Process. Technol. 64 359-370.
80. T. Swift (1971) Development of the fail-safe design features of the DC-10. Damage Tolerance in Aircraft Structures, ASTM STP 486 Philadelphia, PA: ASTM 164-214.
81. M.P. Szolwinski, G. Harish, P.A. McVeigh and T.N. Farris (2000) Experimental study of fretting crack nucleation in aerospace alloys with emphasis on life prediction. D.W. Hoeppner, V. Chandrasekaran, C.B. Elliott (Eds) Fretting Fatigue: Current Technology and Practices, STP 1367 West Conshohocken, PA: ASTM 267-281.
82. M. P. Szolwinski and T. N. Farris, 1994, Fretting fatigue crack initiation: aging aircraft concerns. In: “The 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference-Part 4,” pp. 2173–2179. AIAA-94-1591-CP.
83. M.P. Szolwinski and T.N. Farris (1996) Mechanics of fretting fatigue crack formation. Wear 198 93-107.
84. M.P. Szolwinski and T.N. Farris (1998) Observation, analysis and prediction of fretting fatigue in 2024-T351 aluminum alloy. Wear 221 24-36.
85. M.P. Szolwinski and T.N. Farris (2000) Linking riveting process parameters to the fatigue performance of riveted aircraft structures. J. Aircraft 37(1), 130-137.
86. M.P. Szolwinski, G. Harish, T.N. Farris and T. Sakagami (1999) In situ measurement of near-surface fretting contact temperatures in an aluminum alloy. J. Tribol. 121(1/2), 11-19.
87. D. Thomson, 1998, The national high cycle fatigue (hcf) program. In: “Proceedings of the 3rd National Turbine Engine High Cycle Fatigue (HCF) Conference,” San Antonio, TX, pp. CD-ROM Proceedings.
88. T.C.T. Ting (1996) Anisotropic Elasticity: Theory and Applications New York: Oxford University Press
89. T.A. Venkatesh, B.P. Conner, C.S. Lee, A.E. Giannakopoulos, T.C. Lindley and S. Suresh (2001) An experimental investigation of fretting fatigue in Ti–6Al–4V: the role of contact conditions and microstructure. Metall. Mater. Trans. A Physical Metall. Mater. Sci. 32(5), 1131-1146.
90. L. Vincent (1994) Materials and fretting. R.B. Waterhouse, T.C. Lindley (Eds) Fretting Fatigue, ESIS18 London: Mechanical Engineering Publications 323-337.
91. H. L. Wang, K. Buhler and A. F. Grandt, Jr., 1996, Evaluation of multiple site damage in lap joint specimens. In: “Proceedings of the 1995 USAF Structual Integrity Program Conference,” vol. 1, pp. 21–38.
92. R.B. Waterhouse and D.E. Taylor (1971) The initiation of fatigue cracks in a 0.7% carbon steel by fretting. Wear 17 139-147.
93. B.L. Weick, M.J. Furey and B. Vick (1994) Surface temperatures generated with ceramic materials in oscillating/fretting contact. J. Tribol.—Transact. ASME 116(2), 259-267.
94. D. Zhang and B.I. Sandor (1989) Thermographic analysis of stress concentrations in a composite. Exp. Mech. 29 121-125.