Fibre-reinforced multifunctional SiC matrix composite materials

International Materials Reviews

Volumn 62, Issue 3, 2017, Pages 117-172

  Yin, X W ^a   Cheng, L F ^a   Zhang, L T ^a   Travitzky, N ^b   Greil, P ^b  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

^b UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Ceramic matrix composites; Dielectric property; Electromagnetic absorption property; Electromagnetic interference shielding property; Mechanical properties; Oxidation resistance; Wear resistance

Indexed keywords

CERAMIC MATERIALS; CRACKS; DIELECTRIC MATERIALS; DIELECTRIC PROPERTIES OF SOLIDS; ELECTROMAGNETIC PULSE; ELECTROMAGNETIC SHIELDING; FIBERS; FRICTION; OXIDATION RESISTANCE; REINFORCEMENT; SIGNAL INTERFERENCE; SILICON CARBIDE; WEAR RESISTANCE;

ABSORPTION PROPERTY; CERAMIC-MATRIX-COMPOSITES; DIELECTRICS PROPERTY; ELECTROMAGNETIC ABSORPTION PROPERTY; ELECTROMAGNETIC INTERFERENCE SHIELDING; ELECTROMAGNETIC INTERFERENCE SHIELDING PROPERTY; FIBRE-REINFORCED; SELF-HEALING; SHIELDING PROPERTIES; SIC MATRIX COMPOSITES;

CERAMIC MATRIX COMPOSITES;

EID: 84981731414     PISSN: 09506608     EISSN: 17432804     Source Type: Journal    
DOI: 10.1080/09506608.2016.1213939     Document Type: Review

References (313)

1. R. O., Ritchie :‘The conflicts between strength and toughness’, Nat. Mater., 2011, 10, 817–822.
2. ® foams to tensile loading’, Ceram. Int., 2013, 39, 8015–8020.
3. P., Greil, E., Vogli, T., Fey, A., Bezold, N., Popovsk, H., Gerhard and H., Sieber :‘Effect of microstructure on the fracture behavior of biomorphous silicon carbide ceramics’, J. Eur. Ceram. Soc., 2002, 22, 2697–2707.
4. 2-based ceramics in air above 1500 °C’, Mater. Des., 2013, 52, 17–22.
5. P. M., Biesheuvel and H., Verweij :‘Design of ceramic membrane supports:permeability tensile strength and stress’, J. Membr. Sci., 1999, 156, 141–152.
6. C. A., Leon and R. A. L., Drew :‘Small punch testing for assessing the tensile strength of gradient Al/Ni-SiC composites’, Mater. Lett., 2002, 56, 812–816.
7. P., Zhang, D., Jia, Z., Yang, X., Duan and Y., Zhou :‘Microstructural features and properties of the nano-crystalline SiC/BN(C) composite ceramic prepared from the mechanically alloyed SiBCN powder’, J. Alloys Compd., 2012, 537, 346–356.
8. 33 whiskers’, Mater. Lett., 2005, 59, 3756–3760.
9. 33 whisker-reinforced aluminum matrix composites’, Mater. Sci. Eng. A, 2011, 528, 5184–5189.
10. H., Naji, S. M., Zebarjad and S. A., Sajjadi :‘The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites’, Mater. Sci. Eng. A, 2008, 486, 413–420.
11. C., Dong and I. J., Davies :‘Flexural and tensile strengths of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres’, Mater. Des., 2014, 54, 955–966.
12. W. J., Lee, H. L., Chen, H. T., Chen, J. Y., Hsieh, J. S., Lin, S. P., Ju, K. H., Lin and K. F., Lin :‘Mechanical and structural properties of helical and non-helical silica nanowire’, Compos. Mater. Sci., 2014, 82, 165–171.
13. H., Li, F. W., Sun, K. M., Liew and X. F., Liu :‘Stretching behavior of a carbon nanowire encapsulated in a carbon nanotube’, Scr. Mater., 2009, 60, 129–132.
14. B., Peng, M., Locascio, P., Zapol, S., Li, S. L., Mielke, G. C., Schatz and H. D., Espinosa :‘Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements’, Nat. Nanotechnol., 2008, 3, 626–631.
15. M. S., Wang, D., Golberg and Y., Bando :‘Tensile tests on individual single-walled carbon nanotubes:linking nanotube strength with its defects’, Adv. Mater., 2010, 22, 4071–4075.
16. Y., Zhu, S., Murali, W., Cai, X., Li, J. W., Suk, J. R., Potts and R. S., Ruoff :‘Graphene and graphene oxide:synthesis, properties, and applications’, Adv. Mater., 2010, 22, 3906–3924.
17. Y., Li and M., Zhou :‘Prediction of fracture toughness of ceramic composites as function of microstructure:I. Numerical simulations’, J. Mech. Phys. Solids, 2013, 61, 472–488.
18. 4 poly-hollow microspheres as pore-forming agent’, J. Eur. Ceram. Soc., 2014, 34, 1089–1096.
19. 3 ceramic with high mechanical strength and HAp formation ability in simulated body fluid’, J. Eur. Ceram. Soc., 2006, 26, 1701–1706.
20. 2:Process conditions and fracture toughness’, Ceram. Int., 2012, 38, 2079–2085.
21. 4 ceramics’, J. Eur. Ceram. Soc., 1997, 17, 1093–1097.
22. 4 ceramic matrix composites’, J. Eur. Ceram. Soc., 1999, 19, 1903–1909.
23. H., Zhang and B. W., Darvell :‘Mechanical properties of hydroxyapatite whisker-reinforced bis-GMA-based resin composites’, Dent. Mater., 2012, 28, 824–830.
24. G. C., Jacob, J. M., Starbuck, J. F., Fellers, S., Simunovic and R. G., Boeman :‘Fracture toughness in random-chopped fiber-reinforced composites and their strain rate dependence’, J. Appl.Polym Sci., 2006, 100, 695–701.
25. X., Zhang, L., Xu, W., Han, L., Weng, J., Han and S., Du :‘Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics’, Solid State Sci., 2009, 11, 156–161.
26. 4 composite:theoretical investigation and FEM simulation’, Mater. Sci. Eng. A, 2006, 434, 250–258.
27. B. C., Kim, S. W., Park and D. G., Lee :‘Fracture toughness of the nano-particle reinforced epoxy composite’, Compos. Struct., 2008, 86, 69–77.
28. 2-SiC ultra-high temperature ceramic composites’, J. Alloys. Compd., 2009, 472, 395–399.
29. Y. D., Xu, L. F., Cheng, L. T., Zhang, H. F., Yin and X. W., Yin :‘High toughness, 3D textile, SiC/SiC composites by chemical vapor infiltration’, Mater. Sci. Eng. A, 2001, 318, 183–188.
30. K., Goto and Y., Kagawa :‘Fracture behaviour and toughness of a plane-woven SiC fibre-reinforced SiC matrix composite’, Mater. Sci. Eng. A, 1996, 211, 72–81.
31. N. P., Padture :‘Multifunctional composites of ceramics and single-walled carbon nanotubes’, Adv. Mater., 2009, 21, 1767–1770.
32. L. L., Snead, T., Nozawa, Y., Katoh, T. S., Byun, S., Kondo and D. A., Petti :‘Handbook of SiC properties for fuel performance modeling’, J. Nucl. Mater., 2007, 371, 329–377.
33. K., Yueh, D., Carpenter and H., Feinroth :‘Clad in clay’, Nucl. Eng. Int., 2010, 55, 14–16.
34. K. A., Terrani, B. A., Pint, C. M., Parish, C. M., Silva, L. L., Snead and Y., Katoh :‘Silicon carbide oxidation in steam up to 2 MPa’, J. Am. Ceram. Soc., 2014, 97, 2331–2352.
35. H. G., Kim, J. H., Yang, W. J., Kim and Y. H., Koo :‘Development status of accident-tolerant fuel for light water reactors in Korea’, Nucl. Eng. Technol., 2016, 48, 1–15.
36. f/SiC for fusion structural applications’, J. Eur. Ceram. Soc., 2013, 33, 1577–1589.
37. M., Rosso :‘Ceramic and metal matrix composites:Routes and properties’, J. Mater. Process. Technol., 2006, 175, 364–375.
38. R., Weiß :‘Carbon/Carbons and their industrial applications’, in ‘Ceramic matrix composites:fiber reinforced ceramics and their applications’, (ed. W., Krenkel), 69–111; 2008, Weinheim, Germany, Wiley-VCH Verlag GmbH & Co. KGaA.
39. A. G., Evans, D. B., Marshall, F., Zok and C., Levi :‘Recent advances in oxide-oxide composite technology’, Adv. Compos. Mater., 1999, 8, 17–23.
40. Linus U.J.T., Ogbuji :‘Pest-resistance in SiC/BN/SiC composites’, J. Eur. Ceram. Soc., 2003, 23, 613–617.
41. T., Ogasawara, T., Aoki, M. S. A., Hassan, Y., Mizokami and N., Watanabe :‘Ablation behavior of SiC fiber/carbon matrix composites under simulated atmospheric reentry conditions’, Compos. Part A:Appl. Sci. Manuf., 2011, 42, 221–228.
42. M., Parlier and M. H., Ritti :‘State of the art and perspectives for oxide/oxide composites’, Aerosp. Sci. Technol., 2003, 7, 211–221.
43. R., Naslain :‘Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors:an overview’, Compos. Sci. Technol., 2004, 64, 155–170.
44. O., Jimenez, H., Bagheri, J., McClain, K., Ridler and T., Bornemisza :‘CSGT:Final design and test of a ceramic hot section// ASME Turbo Expo 2003’, collocated with the 2003 International Joint Power Generation Conference. Am. Soc. Mech. Eng., 2003:685–692.
45. F. W., Zok :‘Developments in oxide fiber composites’, J. Am. Ceram. Soc., 2006, 89, 3309–3324.
46. 2 scale volatility under combustion conditions:I. Experimental results and empirical model’, J. Am. Ceram. Soc., 1999, 82, 1817–1825.
47. 2 scale volatility under combustion conditions:II. Thermodynamics and gaseous diffusion model’, J. Am. Ceram. Soc., 1999, 82, 1826–1834.
48. N. S., Jacobson, E. J., Opila and K. N., Lee :‘Oxidation and corrosion of ceramics and ceramic matrix composites’, Curr. Opin. Solid State Mater. Sci., 2001, 5, 301–309.
49. C. J., Armani, M. B., Ruggles-Wrenn, G. E., Fair and R. S., Hay :‘Creep of Nextel™ 610 fiber at 1100 °C in air and in steam’, Int. J. Appl. Ceram. Technol., 2013, 10, 276–284.
50. C. J., Armani, M. B., Ruggles-Wrenn, R. S., Hay and G. E., Fair :‘Creep and microstructure of Nextel™ 720 fiber at elevated temperature in air and steam’, Acta Mater., 2013, 61, 6114–6124.
51. O., Sudre, A., Razell, L., Molliex and M., Holmquist :‘Alumina single-crystal reinforced alumina matrix for combustor tiles’, 22nd Annual Cocoa Beach Conference and Exposition on Advanced Ceramics, Materials and Structures, Cocoa Beach (FL), 1998, 20–24.
52. M., Schmucker and P., Mechnich :‘All-oxide ceramic matrix composites with porous matrices’, in ‘Ceramic matrix composites:fiber reinforced ceramics and their applications’, (ed. W., Krenkel), 205–229; 2008, Weinheim, Germany, Wiley-VCH Verlag GmbH & Co. KGaA.
53. E. A. V., Carelli, H., Fujita, J. Y., Yang and F. W., Zok :‘Effects of thermal aging on the mechanical properties of a porous-matrix ceramic composite’, J. Am. Ceram. Soc., 2002, 85, 595–602.
54. G., Motz, S., Schmidt and S., Beyer :‘The PIP-process:precursor properties and applications’, in ‘Ceramic matrix composites:fiber reinforced ceramics and their applications’, (ed. W., Krenkel), 165–186; 2008, Weinheim, Germany, Wiley-VCH Verlag GmbH & Co. KGaA.
55. P., Lawrence :‘Some theoretical considerations of fibre pull-out from an elastic matrix’, J. Mater. Sci., 1972, 7, 1–6.
56. A., Takaku and R., Arridge :‘The effect of interfacial radial and shear stress on fibre pull-out in composite materials’, J. Phys. D:Appl. Phys., 1973, 6, 2038–2047.
57. Y., Gao, Y., Mai and B., Cotterell :‘Fracture of fiber-reinforced materials’, J. Appl. Math. Phys., 1988, 39, 550–572.
58. H., Stang and S., Shah :‘Failure of fibre-reinforced composites by pullout fracture’, J. Mater. Sci., 1986, 21, 953–957.
59. M. Y., He and J. W., Hutchinson :‘Crack deflection at an interface between dissimilar elastic materials’, Int. J. Solids Struct., 1989, 25, 1053–1067.
60. A. G., Evans and F. W., Zok :‘The physics and mechanics of fibre-reinforced brittle matrix composites’, J. Mater. Sci., 1994, 29, 3857–3896.
61. S., Pompidou and J., Lamon :‘Analysis of crack deviation in ceramic matrix composites and multilayers based on the Cook and Gordon mechanism’, Compos. Sci. Technol., 2007, 67, 2052–2060.
62. R. J., Kerans, R. S., Hay, T. A., Parthasarathy and M. K., Cinibulk :‘Interface design for oxidation-resistant ceramic composites’, J. Am. Ceram. Soc., 2002, 85, 2599–2632.
63. R. R., Naslain, R. J. F., Pailler and J. L., Lamon :‘Single- and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions:an overview’, Int. J. Appl. Ceram. Technol., 2010, 7, 263–275.
64. T. P., Coons, J. W., Reutenauer, A., Mercado, M. A., Kmetz and S. L., Suib :‘The characterization of an oxide interfacial coating for ceramic matrix composites’, Mater. Sci. Eng. A, 2013, 573, 190–196.
65. W. Y., Lee, E., Lara-Curzio and K. L., More :‘Multilayered oxide interphase concept for ceramic-matrix composites’, J. Am. Ceram. Soc., 1998, 81, 717–720.
66. J. B., Davis, D. B., Marshall and P. E. D., Morgan :‘Monazite-containing oxide/oxide composites’, J. Eur. Ceram. Soc., 2000, 20, 583–587.
67. K. K., Chawla, Z. R., Xu and J. S., Ha :‘Processing, structure, and properties of mullite fiber/mullite matrix composites’, J. Eur. Ceram. Soc., 1996, 16, 293–299.
68. K. P., Plucknett, R. L., Cain and M. H., Lewis :‘Interface degradation in CAS/Nicalon during elevated temperature aging’, MRS Proc., 1994, 365, 421.
69. Y., Wang, H. T., Liu, H. F., Cheng and J., Wang :‘Effective fugitive carbon coatings for the strength improvement of 3D Nextel™ 440/aluminosilicate composites’, Mater. Lett., 2014, 126, 236–239.
70. Y., Wang, H. T., Liu and H. F., Cheng :‘Interface engineering of fiber-reinforced all-oxide composites fabricated by the sol-gel method with fugitive pyrolytic carbon coatings’, Compos. Part B:Eng., 2015, 75, 86–94.
71. TM 610 ceramic composite and impact on the mechanical Performance’, J. Mater. Sci., 2014, 49, 710–719.
72. R. A., Simon :‘Progress in processing and performance of porous-matrix oxide/oxide composites’, Int. J. Appl. Ceram. Technol., 2015, 2, 141–149.
73. R. A., Penty, D. P. H., Hasselman and R. M., Spriggs :‘Young's modulus of high-density polycrystalline mullite’, J. Am. Ceram. Soc., 1972, 55, 169–170.
74. R., Atisivan, S., Bose and A., Bandyopadhyay :‘Porous mullite preforms via fused deposition’, J. Am. Ceram. Soc., 2001, 84, 221–223.
75. R. M., Spriggs :‘Expression for effect of porosity on elastic modulus of polycrystalline refractory materials, particularly aluminum oxide’, J. Am. Ceram. Soc., 1961, 44, 628–629.
76. U., Ramamurty, F. W., Zok, F. A., Leckie and H. E., Dève :‘Strength variability in alumina fiber-reinforced aluminum matrix composites’, Acta Mater., 1997, 45, 4603–4613.
77. H., Mei and L. F., Cheng :‘Comparison of the mechanical hysteresis of carbon/ceramic-matrix composites with different fiber performs’, Carbon, 2009, 47, 1034–1042.
78. W., Whitney and R. M., Kimmel :‘Griffith equation and carbon fibre strength’, Nature, 1972, 237, 93–94.
79. J. D., Buckley and D. D., Edie :‘Carbon–carbon materials and composites’; 1993, Norwich, NY, UK, William Andrew.
80. Y., Wang, L., Zhang and L., Cheng :‘Comparison of tensile behaviors of carbon/ceramic composites with various fiber architectures’, J. Appl. Ceram. Technol., 2013, 10, 266–275.
81. L., Tong, A. P., Mouritz and M., Bannister :‘3D fibre reinforced polymer composites’; 2002, Oxford, UK, Elsevier Science.
82. A. P., Mouritz :‘Fracture and tensile fatigue properties of stitched fibre glass composites’, J. Mater. Des. Appl., 2004, 218, 87–93.
83. H. B., Dexter and J. G., Funk :‘Impact resistance and interlaminar fracture toughness of through-the-thickness reinforced graphite/epoxy-27th Structural Dynamics and Materials Conference (San Antonio, TX), AIAA Paper 86-1020, 700–709 (American Institute of Aeronautics and Astronautics, New York, 1986).
84. V. P., Veedu, A., Cao, X., Li, K., Ma, C., Soldano, S., Kar, P. M., Ajayan and M. N., Ghasemi-Nejhad :‘Multifunctional composites using reinforced laminae with carbon-nanotube forests’, Nat. Mater., 2006, 5, 457–462.
85. P., Colombo, G., Mera, R., Riedel and G., Domenico :‘Polymer-derived ceramics:40 years of research and innovation in advanced ceramics’, J. Am. Ceram. Soc., 2010, 93, 1805–1837.
86. A., Lazzeri :‘CVI processing of ceramic matrix composites’, in ‘Ceramics and composites processing methods’, 1st edn., (ed. N. P., Bansal and A. R., Boccaccini), 313–349; 2012, USA, John Wiley & Sons, Inc.
87. I., Golecki :‘Recent advances in rapid densification of thick, refractory composites by inductively heated thermal gradient, flowing gas, isobaric, chemical vapor infiltration’, in ‘Proceedings of the 14th International Conference of Euro CVD-11’, (eds. M. D., Allendorf and C., Bernard), 568–575; 1997, Paris, France, Electrochemical Society Proceedings.
88. M. D., Hager, P., Greil, C., Leyens, Z., van der Sybrand and S. S., Ulrich :‘Self-healing materials’, Adv. Mater., 2010, 22, 5424–5430.
89. P., Greil :‘Generic principles of crack-healing ceramics’, J. Adv. Ceram., 2012, 1, 249–267.
90. L., Guillaumat and J., Lamon :‘Probabilistic-statistical simulation of the non-linear mechanical behavior of a woven SiC/SiC composite’, Compos. Sci. Technol., 1996, 56, 803–808.
91. J., Lamon :‘A micromechanics-based approach to the mechanical behavior of brittle-matrix composites’, Compos. Sci. Technol., 2001, 61, 2259–2272.
92. M., Genet, L., Marcin, E., Baranger, C., Cluzel, P., Ladeveze and A., Mouret :‘Computational prediction of the lifetime of self-healing CMC structures’, Compos. Part A:Appl. Sci. Manufact., 2012, 43, 294–303.
93. F., Lamouroux, G., Camus and J., Thébault :‘Kinetics and mechanisms of oxidation of 2D woven C/SiC composites:I experimental approach’, J. Am. Ceram. Soc., 1994, 77, 2049–2057.
94. L. F., Cheng, Y. D., Xu, L. T., Zhang and X. G., Luan :‘Oxidation and defect control of CVD SiC coating on three-dimensional C/SiC composites’, Carbon, 2002, 40, 2229–2234.
95. C. Y., Zhang, M. M., Zhao, Y. S., Liu, B., Wang, X. W., Wang and S. R., Qiao :‘Tensile strength degradation of a 2.5D-C/SiC composite under thermal cycles in air’, J. Eur. Ceram. Soc., 2016, 36, 3011–3019.
96. C. D., Fung and J. J., Kopanski :‘Thermal oxidation of 3C silicon, carbide single-crystal layers on silicon’, Appl. Phys. Lett., 1984, 45, 757–759.
97. L. F., Cheng, Y. D., Xu, L. T., Zhang and X. W., Yin :‘Effect of carbon interlayer on oxidation behavior of C/SiC composites with a coating from room temperature to 1500 °C’, Mater. Sci. Eng. A, 2001, 300, 219–225.
98. 2-Si multi-composition coating for SiC coated carbon/carbon composites’, J. Alloys Compd., 2010, 501, L20–L24.
99. 2-SiC/SiC oxidation resistance multilayer coating for carbon/carbon composites’, Corros. Sci., 2012, 57, 148–153.
100. 2-SiC coating to protect carbon/carbon composites against oxidation’, Corros. Sci., 2010, 52, 1879–1882.
101. N. S., Jacobson, D. J., Roth, R. W., Rauser, J. D., Cawley and D. M., Curry :‘Oxidation through coating cracks of SiC-protected carbon/carbon’, Surf. Coat. Technol., 2008, 203, 372–383.
102. 3/SiC nanocomposite ceramics after crack healing treatment’, J. Eur. Ceram. Soc., 2008, 28, 1073–1077.
103. F., Lamouroux, S., Bertrand, R., Pailler and R., Naslain :‘A multilayer ceramic matrix for oxidation resistant carbon fibers-reinforced CMCs’, Key Eng. Mater., 1999, 164–165, 365–368.
104. J., Magnant, L., Maillé, R., Pailler, J. C., Ichard, A., Guette, F., Rebillat and E., Philippe :‘Carbon fiber/reaction-bonded carbide matrix for composite materials:manufacture and characterization’, J. Eur. Ceram. Soc., 2012, 32, 4497–4505.
105. 4C-mixed graphite by pressureless sintering and its air oxidation behavior’, Carbon, 1995, 33, 1783–1788.
106. 4C-SiC/C composites with self-healing properties’, Carbon, 1999, 37, 33–40.
107. P., Ehrburger, P., Baranne and J., Lahaye :‘Inhibition of the oxidation of carbon/carbon composite by boron oxide’, Carbon, 1986, 24, 495–499.
108. Y. S., Liu, L. T., Zhang, L. F., Cheng, W. B., Yang, W. H., Zhang and Y. D., Xu :‘Preparation and oxidation protection of CVD SiC/a-BC/SiC coatings for 3D C/SiC composites’, Corros. Sci., 2009, 51, 820–826.
109. f/SiC composites for high-temperature application’, Acta Mater., 2000, 48, 4721–4724.
110. X. W., Yin, L. F., Cheng, L. T., Zhang, Y. D., Xu and X. G., Luan :‘Oxidation behaviour of three-dimensional woven C/SiC composites’, Mater. Sci. Technol., 2001, 17, 727–730.
111. 2-Si/B-modified coating for C/C composites’, Corros. Sci., 2012, 60, 4–9.
112. M. E., Westwood, J. D., Wester, R. J., Day, F. H., Hayes and R., Taylor :‘Oxidation protection for carbon fibre composites’, J. Mater. Sci., 1996, 31, 1389–1397.
113. S., Labruquere, H., Blanchard, R., Pailler and R., Naslain :‘Enhancement of the oxidation resistance of interfacial area in C/C composites. Part I:oxidation resistance of B-C, Si-B-C and Si-C coated carbon fibres’, J. Eur. Ceram. Soc., 2002, 22, 1001–1009.
114. S., Labruquere, H., Blanchard, R., Pailler and R., Naslain :‘Enhancement of the oxidation resistance of interfacial area in C/C composites. Part II:oxidation resistance of B-C, Si-B-C and Si-C coated carbon preforms densified with carbon’, J. Eur. Ceram. Soc., 2002, 22, 1011–1021.
115. T., Feng, H. J., Li, X., Yang, X. H., Shi, S., Wang and Z. B., He :‘Multilayer and multi-component oxidation protective coating system for carbon/carbon composites from room temperature to 1873K’, Corros. Sci., 2013, 72, 144–149.
116. X., Zuo, L., Zhang, Y., Liu, L., Cheng and Y., Xia :‘Oxidation behaviour of two-dimensional C/SiC modified with self-healing Si-B-C coating in static air’, Corros. Sci., 2012, 65, 87–93.
117. L., Quemard, F., Rebillat, A., Guette, H., Tawil and C., Louchet-Pouillerie :‘Self-healing mechanisms of a SiC fiber reinforced multi-layered ceramic matrix composite in high pressure steam environments’, J. Eur. Ceram. Soc., 2007, 27, 2085–2094.
118. f/SiC composites modified by a boron-containing phase’, Ceram. Int., 2013, 39, 4729–4734.
119. J. I., Matsushita and Y., Sawada :‘Oxidation resistance of silicon tetra boride powder’, J. Ceram. Soc. Jpn., 1997, 105, 922–924.
120. 4 particles in inter-bundle pores’, Compos. Sci. Technol., 2008, 68, 602–607.
121. X. Y., Cao, X. W., Yin, X. K., Ma, X. M., Fan, L. F., Cheng and L. T., Zhang :‘Oxidation behavior of SiBC matrix modified C/SiC composites with different PyC interphase thicknesses’, Ceram. Int., 2015, 41, 1695–1700.
122. 4 modified C/SiC composites’, J. Eur. Ceram. Soc., 2010, 30, 1955–1962.
123. X. Y., Cao, X. W., Yin, X. M., Fan, L. F., Cheng and L. T., Zhang :‘Effect of PyC interphase thickness on mechanical behaviors of SiBC matrix modified C/SiC composites fabricated by reactive melt infiltration’, Carbon, 2014, 77, 886–895.
124. XN phases:A new class of solids thermodynamically stable nanolaminates’, Prog. Solid State Chem., 2000, 28, 201–281.
125. 2 (M = Al, Si and Ge)’, J. Phys. Condens. Matter, 2001, 13, 10001–10010.
126. n phases:Materials science and thin-film processing’, Thin Solid Films, 2010, 518, 1851–1878.
127. Z. M., Sun :‘Progress in research and development on MAX phases:a family of layered ternary compounds’, Int. Mater. Rev., 2011, 56, 143–166.
128. 2AlC ceramic’, J. Eur. Ceram. Soc., 2012, 32, 1813–1820.
129. 2AlC ceramic’, J. Mater. Chem., 2012, 22, 8304–8313.
130. 2AlC’, J. Eur. Ceram. Soc., 2014, 34, 1083–1088.
131. 2:II. Effect of grain size and deformation temperature’, J. Am. Ceram. Soc., 1999, 82, 2855–2860.
132. 2’, Ceram. Int., 2007, 33, 789–793.
133. 2 with improved oxidation resistance by substitution of Si with Al’, Mater. Res. Innovat., 2004, 8, 97–102.
134. 2/SiC composites’, Ceram. Int., 2006, 32, 883–890.
135. 2/SiC composites’, Int. J. Appl. Ceram. Technol., 2006, 3, 47–54.
136. 2-based material in air’, Acta Mater., 2001, 49, 4347–4353.
137. 2’, J. Mater. Process. Technol., 2009, 209, 641–646.
138. 2-SiC nanocomposites in air’, Compos. Sci. Technol., 2008, 68, 1531–1538.
139. 2AC (A=Sn, Ga, Cd, In, and Pb)’, Appl. Phys. Lett., 2009, 94, 181906.
140. 2SnC ceramic’, J. Eur. Ceram. Soc., 2016, 36, 25–32.
141. 2 with SiC fibers and powders up to temperatures of 1550 °C’, J. Am. Ceram. Soc., 2011, 94, 1737–1743.
142. 2’, Key Eng. Mater., 2013, 544, 238–244.
143. 2’, Wear, 2012, 274, 188–195.
144. 2 fillers’, Ceram. Int., 2016, 42, 3019–3027.
145. X. M., Fan, X. W., Yin, X. Y., Cao, L. Q., Chen, L. F., Cheng and L. T., Zhang :‘Improvement of the mechanical and thermophysical properties of C/SiC composites fabricated by liquid silicon infiltration’, Compos. Sci. Technol., 2015, 115, 21–27.
146. 2’, J. Am. Ceram. Soc., 2016, 99, 1717–1724.
147. 30 alloy’, J. Eur. Ceram. Soc., 2014, 34, 1493–1499.
148. X. W., Yin, S. S., He, L. T., Zhang, S. W., Fan, L. F., Cheng, G. L., Tian and T., Li :‘Fabrication and characterization of a carbon fibre reinforced carbon-silicon carbide-titanium silicon carbide hybrid matrix composite’, Mater. Sci. Eng. A, 2010, 527, 835–841.
149. 2’, Adv. Eng. Mater., 2014, 16, 670–683.
150. 3 composites’, J. Am. Ceram. Soc., 2007, 90, 2128–2134.
151. H., Windsheimer, N., Travitzky, A., Hofenauer and P., Greil :‘Laminated object manufacturing of preceramic-paper-derived Si-SiC composites’, Adv. Mater., 2007, 19, 4515–4519.
152. Z. X., Meng :‘Strengthening and toughening of continuous fiber reinforced silicon carbide ceramic matrix composites’, PhD thesis, Northwestern Polytechnical University, 2013, 1–98.
153. xC modified 2D C/SiC composites in thermal-load oxidizing environments’, PhD thesis, Northwestern Polytechnical University, 2009, 39–88.
154. C., Byrne and Z., Wang :‘Influence of thermal properties on friction performance of carbon composites’, Carbon, 2001, 39, 1789–1801.
155. J., Dong and Z., Wang :‘Effects of anti-oxidant migration on friction and wear of C/C aircraft brakes’, Appl. Compos. Mater., 2009, 16, 73–81.
156. M., Godet :‘The third body approach:a mechanical view of wear’, Wear, 1984, 100, 437–452.
157. B., Lei, L., He, M., Yi, L., Ran, H., Xu, Y., Ge and K., Peng :‘New insights into the microstructure of the friction surface layer of C/C composites’, Carbon, 2011, 49, 4554–4562.
158. M., Gouider, Y., Berthier, P., Jacquemard and B., Rousseau :‘Mass spectrometry during C/C composite friction:carbon oxidation associated with high friction coefficient and high wear rate’, Wear, 2004, 256, 1082–1087.
159. J. C., Rietsch, J., Dentzer, A., Dufour, F., Schnell, L., Vidal, P., Jacquemard, R., Gadiou and C., Vix-Guterl :‘Characterizations of C/C composites and wear debris after heavy braking demands’, Carbon, 2009, 47, 85–93.
160. X., Xiong, B., Huang, J., Li and H., Xu :‘Friction behaviors of carbon/carbon composites with different pyrolytic carbon textures’, Carbon, 2006, 44, 463–467.
161. J., Li, X., Xiong, H., Zhang, P., Xiao and B., Huang :‘Study on the worn surfaces of C/C composites at various braking velocities’, Acta Mater. Compos. Sin., 2007, 24, 112–117.
162. 12 liquid phase by spark-plasma sintering’, J. Eur. Ceram. Soc., 2014, 34, 565–574.
163. H. J., Choi, H. T., Bae, J. K., Lee, B. C., Na, M. J., McNallan and D. S., Lim :‘Sliding wear of silicon carbide modified by etching with chlorine at various temperatures’, Wear, 2009, 266, 214–219.
164. 4 and SiC by using sinter layers’, Appl. Surf. Sci., 2011, 257, 10246–10253.
165. V. M., Candelario, O., Borrero-López, F., Guiberteau, R., Moreno and A. L., Ortiz :‘Sliding-wear resistance of liquid-phase-sintered SiC containing graphite nanodispersoids’, J. Eur. Ceram. Soc., 2014, 34, 2597–2602.
166. S., Fan, L., Zhang, L., Cheng, J., Zhang, S., Yang and H., Liu :‘Wear mechanisms of the C/SiC brake materials’, Tribol. Int., 2011, 44, 25–28.
167. S. Z., Wen :‘Principle of tribology’; 1990, Beijing, China, Tsinghua University Press.
168. G. W., Stachowiak :‘Wear-materials, mechanisms and practice’; 2005, England, John Wiley & Sons Ltd.
169. S. F., Wayne, J. G., Baldoni and S.-T., Buljan :‘Abrasion and erosion of WC–Co with controlled microstructure’, Tribol. Trans., 1990, 33, 611–617.
170. f/C-SiC) composites’, J. Eur. Ceram. Soc., 2010, 30, 3187–3201.
171. X. H., Cui, S. Q., Wang, F., Wang and K. M., Chen :‘Research on oxidation wear mechanism of the cast steels’, Wear, 2008, 265, 468–476.
172. S., Nagaraj, S., Zhao, L. R., Dharani, G. E., Hilmas and J., Wei :‘Effect of oxidation on wear in C/C aircraft disk brakes’, Int. Rev. Aerospace Eng., 2014, 7, 34–42.
173. 4-graphene nanocomposites at room and elevated temperatures’, J. Eur. Ceram. Soc., 2014, 34, 3309–3317.
174. S., Ozcan and P., Filip :‘Wear of carbon fiber reinforced carbon matrix composites:Study of abrasive, oxidative wear and influence of humidity’, Carbon, 2013, 62, 240–247.
175. T. D., Burchell and J. P., Strizak :‘The effect of neutron irradiation on the fracture toughness of graphite’, Nucl. Eng. Des., 2014, 271, 262–269.
176. T., Oku, A., Kurumada, Y., Imamura and M., Ishihara :‘Effects of ion irradiation on the hardness properties of graphites and C/C composites by indentation tests’, J. Nucl. Mater., 2008, 381, 92–97.
177. X., Duan, M., Wang, D., Jia, N., Jing, Z., Wu and Z., Yang :‘Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics’, Mater. Sci. Eng. A, 2014, 607, 38–43.
178. 2’, Mater. Lett., 2002, 57, 119–123.
179. S., Fouquet, M., Rollin, R., Pailler and X., Bourrat :‘Tribological behaviour of composites made of carbon fibres and ceramic matrix in the Si-C system’, Wear, 2008, 264, 850–856.
180. J., Cumings and A., Zettl :‘Low-friction nanoscale linear bearing realized from multiwall carbon nanotubes’, Science, 2000, 289, 602–604.
181. J., Umeda, B., Fugetsu, E., Nishida, H., Miyaji and K., Kondoh :‘Friction behavior of network-structured CNT coating on pure titanium plate’, Appl. Surf. Sci., 2015, 357, 721–727.
182. Z., Sun and X., Cheng :‘Investigation of carbon nanotube-containing film on silicon substrates and its tribological behavior’, Appl. Surf. Sci., 2015, 355, 272–278.
183. M., Cho :‘The flexural and tribological behavior of multi-walled carbon nanotube-reinforced polyphenylene sulfide composites’, Mater. Trans., 2008, 49, 2801–2807.
184. R. A., Gandhi, K., Palanikumar, B. K., Ragunath and J. P., Davim :‘Role of carbon nanotubes (CNTs) in improving wear properties of polypropylene (PP) in dry sliding condition’, Mater. Des., 2013, 48, 52–57.
185. J. L., Jiang, H. Z., Wang, H., Yang and J. C., Xu :‘Fabrication and wear behavior of CNT/Al composites’, Trans. Nonferrous Met. Soc. China, 2007, 17, 113–116.
186. M. M. H., Bastwros, A. M. K., Esawi and A., Wifi :‘Friction and wear behavior of Al-CNT composites’, Wear, 2013, 307, 164–173.
187. 4 nanocomposites with a high loading of nanotubes’, Carbon, 2014, 72, 338–347.
188. 3-CNT ceramic nanocomposites at room and high temperatures’, Ceram. Int., 2013, 39, 5821–5826.
189. K., Balani, S. P., Harimkar, A., Keshri, Y., Chen, N. B., Dahotre and A., Agarwal :‘Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating’, Acta Mater., 2008, 56, 5984–5994.
190. D., Lahiri, V., Singh, A. K., Keshri, S., Seal and A., Agarwal :‘Carbon nanotube toughened hydroxyapatite by spark plasma sintering:Microstructural evolution and multiscale tribological properties’, Carbon, 2010, 48, 3103–3120.
191. K., Rajkumar and S., Aravindan :‘Tribological studies on microwave sintered copper-carbon nanotube composites’, Wear, 2011, 270, 613–621.
192. C. B., Lin, Z. C., Chang, Y. H., Tung and Y. Y., Ko :‘Manufacturing and tribological properties of copper matrix/carbon nanotubes composites’, Wear, 2011, 270, 382–394.
193. D. S., Lim, J. W., An and H. J., Lee :‘Effect of carbon nanotube addition on the tribological behavior of carbon/carbon composites’, Wear, 2001, 252, 512–517.
194. Q. M., Gong, Z., Li, X. D., Bai, D., Li and J., Liang :‘The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C-C composites obtained by CVI’, Compos. Sci. Technol., 2005, 65, 1112–1119.
195. P., Xiao, X. F., Lu, Y. Q., Liu and L. L., He :‘Effect of in situ grown carbon nanotubes on the structure and mechanical properties of unidirectional carbon/carbon composites’, Mater. Sci. Eng. A, 2011, 528, 3056–3061.
196. Q., Song, K. Z., Li, H. L., Li, H. J., Li and C., Ren :‘Fullerene C60 as an inhibitor of high temperature lipid oxidation’, Carbon, 2012, 50, 3943–3960.
197. H. Y., Yu, J. H., Lu, Q., Song, K. Z., Li, H. J., Li, Q. G., Fu and L., Zhang :‘Compressive properties of carbon/carbon composites reinforced by carbon nanotubes with different orientations and lengths’, Vacuum, 2014, 99, 76–79.
198. K., Li, L., Li, H., Li, Q., Song, J., Lu and Q., Fu :‘Electrophoretic deposition of carbon nanotubes onto carbon fiber felt for production of carbon/carbon composites with improved mechanical and thermal properties’, Vacuum, 2014, 104, 105–110.
199. X., Lu, P., Xiao, J., Chen and Y., Long :‘Oxidation behavior of C/C composites with the fibre/matrix interface modified by carbon nanotubes grown in situ at low temperature’, Corros. Sci., 2012, 55, 20–25.
200. Q. M., Gong, Z., Li, Z., Zhang, B., Wu, X., Zhou and Q. Z., Huang :‘Tribological properties of carbon nanotube-doped carbon/carbon composites’, Tribol. Int., 2006, 39, 937–944.
201. K., Obunai, K., Okubo and T., Fujii :‘Synthesization of CNTs on pore surfaces in C/C composites and effect of CNTs on tribological characteristics’, J. Soc. Mater. Sci., 2014, 63, 356–361.
202. 4/BN ceramic composites’, J. Eur. Ceram. Soc., 2014, 34, 3319–3328.
203. Z., Chen, H., Li, Q., Fu and X., Qiang :‘Tribological behaviors of SiC/h-BN composite coating at elevated temperatures’, Tribol. Int., 2012, 56, 58–65.
204. S., Seghi, J., Lee and J., Economy :‘High density carbon fiber/boron nitride matrix composites:fabrication of composites with exceptional wear resistance’, Carbon, 2005, 43, 2035–2043.
205. S., Seghi, B., Fabio and J., Economy :‘Carbon/carbon-boron nitride composites with improved wear resistance compared to carbon/carbon’, Carbon, 2004, 42, 3043–3048.
206. X. M., Fan, X. W., Yin, Y., Cheng, L. T., Zhang and L. F., Cheng :‘Microstructure and tribological behaviors of C/C-BN composites fabricated by chemical vapor infiltration’, Ceram. Int., 2012, 38, 6137–6144.
207. X., Dong, S., Jahanmir and L. K., Ives :‘Wear transition diagram for silicon carbide’, Tribol. Int., 1995, 28, 559–572.
208. Z., Chen, H., Li, K., Li, Q., Shen and Q., Fu :‘Influence of grain size on wear behavior of SiC coating for carbon/carbon composites at elevated temperatures’, Mater. Des., 2014, 53, 412–418.
209. H., Tang, X., Zeng, X., Xiong, L., Li and J., Zou :‘Mechanical and tribological properties of short-fiber-reinforced SiC composites’, Tribol. Int., 2009, 42, 823–827.
210. W., Krenkel :Proceedings of the ISATA Conference on Supercars, 31 October–4 November, Aachen, Germany, 1994.
211. W., Krenkel, B., Heidenreich and R., Renz :‘C/C-SiC composites for advanced friction systems’, Adv. Eng. Mater., 2002, 4, 427–436.
212. Y. H., Zhang, Z. C., Xiao, J. P., Wang, R. P., Xing and Z. G., Peng :‘Effect of pyrocarbon content on thermal and frictional properties in C/C preforms of C/C-SiC composites’, Wear, 2010, 269, 132–138.
213. Y. S., Wang and M. H., Stephen :‘Wear and wear transition mechanisms of ceramics’, Wear, 1996, 195, 112–122.
214. V. S. R., Murthy, H., Kobayashi, N., Tamari, S., Tsurekawa, T., Watanabe and K., Kato :‘Effect of doping elements on the friction and wear properties of SiC in unlubricated sliding condition’, Wear, 2004, 257, 89–96.
215. Y. D., Xu, Y. N., Zhang, L. F., Cheng, L. T., Zhang, J. J., Lou and J. Z., Zhang :‘Preparation and friction behavior of carbon fiber reinforced silicon carbide matrix composites’, Ceram. Int., 2007, 33, 439–445.
216. Y. Z., Cai, S. W., Fan, H. Y., Liu, L. T., Zhang, L. F., Cheng, B. X., Dong and J., Jiang :‘Microstructures and improved wear resistance of 3D needled C/SiC composites with graphite filler’, Compos. Sci. Technol., 2009, 69, 2447–2453.
217. P., Andersson and A., Blomberg :‘Instability in the tribochemical wear of silicon-carbide in unlubricated sliding contacts’, Wear, 1994, 174, 1–7.
218. J., Takadoum, Z., Zsiga and C., Roquescarmes :‘Wear mechanism of silicon-carbide — new observations’, Wear, 1994, 174, 239–242.
219. D. C., Cranmer :‘Friction and wear properties of monolithic silicon-based ceramics’, J. Mater. Sci., 1985, 20, 2029–2037.
220. M. C., Vera, J., Ramirez-Rico, J., Martinez-Fernandez and M., Singh :‘Sliding wear resistance of biomorphic SiC ceramics’, Int. J. Refract. Met. H., 2015, 49, 327–333.
221. R., Dhiman, K., Rana, E., Bengu and P., Morgen :‘Synthesis, characterization, and wear and friction properties of variably structured SiC/Si elements made from wood by molten Si impregnation’, J. Eur. Ceram. Soc., 2012, 32, 1105–1116.
222. K., Sang and Z., Jin :‘Unlubricated wear of Si/SiC and its composite with nickel Si/SiC-Ni’, Tribol. Int., 2001, 34, 315–319.
223. G., Amirthan and M., Balasubramanian :‘Reciprocating sliding wear studies on Si/SiC ceramic composites’, Wear, 2011, 271, 1039–1049.
224. S. J., Park, M. K., Seo and J. R., Lee :‘Effect of oxidation inhibitor on the low energy tribological behavior of carbon-carbon composites’, Carbon, 2002, 40, 835–843.
225. 2 coupled with different counterfaces’, Ceram. Int., 2015, 41, 6950–6955.
226. 2’, Mater. Des., 2014, 61, 270–274.
227. 3Al matrix self-lubricating composites from 25 to 800° C’, J. Mater. Eng. Perform., 2014, 23, 1374–1385.
228. A. G., Evans and D. B., Marshall :‘Wear mechanisms in ceramics’, in ‘Fundamentals of friction and wear of materials’, (ed. D. A., Rigney), 439–452; 1981, Metals Park, OH, American Society for Materials, American Society for Metals.
229. T. E., Fischer and H., Tomizawa :‘Interaction of tribochemistry and microfracture in the friction and wear of silicon nitride’, Wear, 1985, 105, 29–45.
230. 2-TiC composites’, Ceram. Int., 2013, 39, 4597–4607.
231. F., Lenz and W., Krenkel :‘Fabrication of fiber composites with a MAX phase matrix by reactive melt infiltration’, IOP Conf. Ser.:Mater. Sci. Eng., 2011, 18, 202030.
232. F., Lenz and W., Krenkel :‘Carbon fiber reinforced ceramics based on reactive melt infiltration processes’, J. Korean Ceram. Soc., 2012, 49, 287–294.
233. L. B., Kong, Z. W., Li, L., Liu, R., Huang, M., Abshinova, Z. H., Yang, C. B., Tang, P. K., Tan, C. R., Deng and S., Matitsine :‘Recent progress in some composite materials and structures for specific electromagnetic applications’, Int. Mater. Rev., 2013, 58, 203–259.
234. D. D. L., Chung :‘Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing’, Carbon, 2012, 50, 3342–3353.
235. D., Micheli, A., Vricella, R., Pastore and M., Marchetti :‘Synthesis and electromagnetic characterization of frequency selective radar absorbing materials using carbon nanopowders’, Carbon, 2014, 77, 756–774.
236. D., Micheli, R., Pastore, A., Vricella, R. B., Morles, M., Marchetti, A., Delfini, F., Moglie and V. M., Primiani :‘Electromagnetic characterization and shielding effectiveness of concrete composite reinforced with carbon nanotubes in the mobile phones frequency band’, Mater. Sci. Eng. B, 2014, 188, 119–129.
237. D., Micheli, R., Pastore, G., Gradoni, V. M., Primiani, F., Moglie and M., Marchetti :‘Reduction of satellite electromagnetic scattering by carbon nanostructured multilayers’, Acta Astronaut., 2013, 88, 61–73.
238. M. S., Cao, W. L., Song, Z. L., Hou, B., Wen and J., Yuan :‘The effects of temperature and frequency on the dielectric properties, electromagnetic interference shielding and microwave-absorption of short carbon fiber/silica composites’, Carbon, 2010, 48, 788–796.
239. B., Wen, M. S., Cao, M. M., Lu, W. Q., Cao, H. L., Shi, J., Liu, X. X., Wang, H. B., Jin, X. Y., Fang and W. Z., Wang :‘Reduced graphene oxides:Light-weight and high-efficiency electromagnetic interference shielding at elevated temperatures’, Adv. Mater., 2014, 26, 3484–3489.
240. W. L., Song, X. T., Guan, L. Z., Fan, W. Q., Cao, C. Y., Wang, Q. L., Zhao and M. S., Cao :‘Magnetic and conductive graphene papers toward thin layers of effective electromagnetic shielding’, J. Mater. Chem. A, 2015, 3, 2097–2107.
241. I., Huynen, N., Quievy, C., Bailly, P., Bollen, C., Detrembleur, S., Eggermont, I., Molenberg, J. M., Thomassin, L., Urbanczyk and T., Pardoen :‘Multifunctional hybrids for electromagnetic absorption’, Acta Mater., 2011, 59, 3255–3266.
242. Y., Danlee, I., Huynen and C., Bailly :‘Frequency-selective multilayer electromagnetic bandgap structure combining carbon nanotubes with polymeric or ceramic substrates’, Appl. Phys. Lett., 2014, 105, 123118.
243. P., Bollen, N., Quie’vy, I., Huynen, C., Bailly, C., Detrembleur, J. M., Thomassin and T., Pardoen :‘Multifunctional architectured materials for electromagnetic absorption’, Scr. Mater., 2013, 68, 50–54.
244. C. J., Klemperer and D., Maharaj :‘Composite electromagnetic interference shielding materials for aerospace applications’, Compos. Struct., 2009, 91, 467–472.
245. D. D. L., Chung :‘Materials for electromagnetic interference shielding’, J. Mater. Eng. Perform., 2000, 9, 350–354.
246. J. S., Moya, S., Lopez-Esteban and C., Pecharroman :‘The challenge of ceramic/metal microcomposites and nanocomposites’, Prog. Mater. Sci., 2007, 52, 1017–1090.
247. X., Wang, N. P., Padture and H., Tanaka :‘Contact-damage-resistant ceramic/single-wall carbon nanotubes and ceramic/graphite composites’, Nat. Mater., 2004, 3, 539–544.
248. L., Fernandez-Garcia :‘Dielectric properties of carbon nanofibre/alumina composites’, Carbon, 2013, 57, 380–387.
249. J. N., Coleman, U., Khan, W. J., Blau and Y. K., Gunko :‘Small but strong:a review of the mechanical properties of carbon nanotube-polymer composites’, Carbon, 2006, 44, 1624–1652.
250. I. T., Kim, A., Tannenbaum and R., Tannenbaum :‘Anisotropic conductivity of magnetic carbon nanotubes embedded in epoxy matrices’, Carbon, 2011, 49, 54–61.
251. X. W., Yin, L., Kong, L. T., Zhang, L. F., Cheng, N., Travitzky and P., Greil :‘Electromagnetic properties of Si-C-N based ceramics and composites’, Int. Mater. Rev., 2014, 59, 326–355.
252. R., Wu, K., Zhou, C. Y., Yue, J., Wei and Y., Pan :‘Recent progress in synthesis, properties and potential applications of SiC nanomaterials’, Prog. Mater. Sci., 2015, 72, 1–60.
253. F. X., Qin and H. X., Peng :‘Ferromagnetic microwires enabled multifunctional composite materials’, Prog. Mater. Sci., 2013, 58, 183–259.
254. C., Brosseau :‘Modelling and simulation of dielectric heterostructures:a physical survey from an historical perspective’, J. Phys. D:Appl. Phys., 2006, 39, 1277–1294.
255. F., Qin and C., Brosseau :‘A review and analysis of microwave absorption in polymer composites filler with carbonaceous particles’, J. Appl. Phys., 2012, 111, 061301.
256. J. M., Thomassin, C., Jérôme, T., Pardoen, C., Bailly, I., Huynen and C., Detrembleur :‘Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials’, Mater. Sci. Eng. R, 2013, 74, 211–232.
257. P. O., Leach and M. B., Alexander :‘Electronic systems failures and anomalies attributed to electromagnetic interference, Technical Report, NASA Report 1374, National Aeronautics and Space Administration, Washington DC, USA, 1995.
258. M., Albano, D., Micheli, G., Gradoni, R. B., Morles, M., Marchetti, F., Moglie and V. M., Primiani :‘Electromagnetic shielding of thermal protection system for hypersonic vehicles’, Acta Astronaut., 2013, 87, 30–39.
259. X. F., Liu, L. T., Zhang, X. W., Yin, F., Ye, Y. S., Liu and L. F., Cheng :‘Flexible thin SiC fiber fabrics using carbon nanotube modification for improving electromagnetic shielding properties’, Mater. Des., 2016, 104, 68–75.
260. n matrix composites’, Ceram. Int., 2016, 42, 986–988.
261. 3/SiC composites’, Ceram. Int., 2016, 42, 9448–9454.
262. L. Q., Chen, X. W., Yin, X. M., Fan, M., Chen, X. K., Ma, L. F., Cheng and L. T., Zhang :‘Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites’, Carbon, 2015, 95, 10–19.
263. Y., Lei, Y., Wang, J., Xue and Y., Song :‘Influence of pyrolysis conditions on fabrication of polymer-derived BN fiber for wave transparent application’, Compos. Part B:Eng., 2013, 51, 254–259.
264. F., Cao, Z., Fang and C., Zhang :‘High-temperature properties and associated structure evolution of continuous SiNO fiber-reinforced BN composites for wave transparency’, Mater. Des., 2013, 43, 258–263.
265. P., Theilmann, D. J., Yun, P., Asbeck and S. H., Park :‘Superior electromagnetic interference shielding and dielectric properties of carbon nanotube composites through the use of high aspect ratio CNTs and three-roll milling’, Org. Electron., 2013, 14, 1531–1537.
266. f/SiC composites containing pyrolytic carbon interphase’, Carbon, 2013, 60, 552–555.
267. 4 sandwich composites prepared by gelcasting’, Ceram. Int., 2014, 40, 8253–8259.
268. 2 composites fabricated through a sol-gel process’, Powder Technol., 2013, 239, 374–380.
269. D., Stauffer :‘Introduction to percolation theory’; 1985, London, UK, Taylor & Francis.
270. A. N., Lagarkov and A. K., Sarychev :‘Electromagnetic properties of composites containing elongated conducting inclusions’, Phys. Rev. B, 1996, 53, 6318–6336.
271. C. A., Grimes, C., Mungle, D., Kouzoudis, S., Fang and P. C., Eklund :‘The 500 MHz to 5.50 GHz complex permittivity spectra of single-wall carbon nanotube-loaded polymer composites’, Chem. Phys. Lett., 2000, 319, 460–464.
272. I., Balberg, C., Anderson, S., Alexander and N., Wagner :‘Excluded volume and its relation to the onset of percolation’, Phys. Rev. B, 1984, 30, 3933–3943.
273. http://www.coiceramics.com
274. F., Ye, L. T., Zhang, X. W., Yin, Y., Liu and L. F., Cheng :‘Dielectric and electromagnetic wave absorbing properties of two types of SiC fibres with different compositions’, J. Mater. Sci. Technol., 2013, 29, 55–58.
275. 3 fiber woven fabrics’, Trans. Nonferrous Met. Soc. China, 2012, 22, 354–359.
276. N. M., Alford and S. J., Penn :‘Sintered alumina with low dielectric loss’, J. Appl. Phys., 1996, 80, 5895–5898.
277. S. J., Penn, N. M., Alford, A., Templeton, X. R., Wang, M. S., Xu, M., Reece and K., Schrapel :‘Effect of porosity and grain size on the microwave dielectric properties of sintered alumina’, J. Am. Ceram. Soc., 1997, 87, 1885–1888.
278. Q., Ling, J., Sun, Q., Zhao and Q., Zhou :‘Microwave absorbing properties of linear low density polyethylene/ethylene-octene copolymer composites filled with short carbon fiber’, Mater. Sci. Eng. B, 2009, 162, 162–166.
279. M. S., Hong, W. K., Choi, K. H., An, S. J., Kang and S. J., Park :‘Electromagnetic interference shielding behaviors of carbon fibers-reinforced polypropylene matrix composites:II. Effects of filler length control’, J. Ind. Eng. Chem., 2014, 20, 3901–3904.
280. H., Luo, G., Xiong, X., Chen, Q., Li, C., Ma, D., Li and X., Wu :‘ZnO nanostructures grown on carbon fibers:Morphology control and microwave absorption properties’, J. Alloy. Compd., 2014, 593, 7–15.
281. W., Zhou, P., Xiao, Y., Li and L., Zhou :‘Dielectric properties of BN modified carbon fibers by dip-coating’, Ceram. Int., 2013, 39, 6569–6576.
282. J., Zeng, P., Tao, S., Wang and J., Xu :‘Preparation and study on radar-absorbing materials of cupric oxide-nanowire-covered carbon fibers’, Appl. Surf. Sci., 2009, 255, 4916–4920.
283. X., Luo and D. D. L., Chung :‘Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites’, Compos. Part B:Eng., 1999, 30, 227–231.
284. f/SiC composites fabricated through precursor infiltration and pyrolysis’, Ceram. Int., 2014, 40, 9009–9016.
285. D., Ding, F., Luo, Y., Shi and J., Chen :‘Influence of thermal oxidation on complex permittivity and microwave absorbing potential of KD-I SiC fiber fabrics’, J. Eng. Fiber Fabr., 2014, 9, 99–104.
286. E., Tan, Y., Kagawa and A. F., Dericioglu :‘Electromagnetic wave absorption potential of SiC-based ceramic woven fabrics in the GHz range’, J. Mater. Sci., 2009, 44, 1172–1179.
287. F., Ye, L. T., Zhang, X. W., Yin, Y. S., Liu and L. F., Cheng :‘The improvement of wave-absorbing ability of silicon carbide fibers by depositing boron nitride coating’, Appl. Surf. Sci., 2013, 270, 611–616.
288. X. M., Liu, X. W., Yin, L., Kong, Q., Li, Y., Liu, W. Y., Duan, L. T., Zhang and L. F., Cheng :‘Fabrication and electromagnetic interference shielding effectiveness of carbon nanotube reinforced carbon fiber/pyrolytic carbon composites’, Carbon, 2014, 68, 501–510.
289. A. C., Dupuis :‘The catalyst in the CCVD of carbon nanotubes–a review’, Prog. Mater. Sci., 2005, 50, 929–961.
290. 3 composites’, J. Appl. Phys., 2008, 103, 124103.
291. D., Wang, Y., Song and Y., Li :‘Effect of composition and structure on specific resistivity of SiC fibers’, Trans. Nonferrous Met. Soc. China, 2012, 22, 1133–1139.
292. f/SiC composites fabricated by combined CVI and PIP process’, Ceram. Int., 2014, 40, 10037–10041.
293. f/SiC composites’, Ceram. Int., 2014, 40, 3411–3418.
294. 2 as inert filler’, Ceram. Int., 2015, 41, 4199–4206.
295. H., Liu, H., Cheng, J., Wang, G., Tang, R., Che and Q., Ma :‘Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites’, Mater. Sci. Eng. A, 2009, 525, 121–127.
296. f/LAS glass-ceramic composites’, Ceram. Int., 2013, 39, 3135–3140.
297. F., Wan, F., Luo, H., Wang, Z., Huang, W., Zhou and D., Zhu :‘Effects of carbon black (CB) and alumina oxide on the electromagnetic-and microwave-absorption properties of SiC fiber/aluminum phosphate matrix composites’, Ceram. Int., 2014, 40, 15849–15857.
298. Q., Li, X. W., Yin, W. Y., Duan, L., Kong, X. M., Liu and L. F., Cheng :‘Improved dielectric and electromagnetic interference shielding properties of ferrocene-modified polycarbosilane derived SiC/C composite ceramics’, J. Eur. Ceram. Soc., 2014, 34, 2187–2201.
299. H., Tian, H. T., Liu and H. F., Cheng :‘A high-temperature radar absorbing structure:design, fabrication, and characterization’, Compos. Sci. Technol., 2014, 90, 202–208.
300. 2 coated SiC fibers:A feasibility study’, Mater. Lett., 2015, 145, 229–231.
301. 2SnC MAX phase by mechanical activation and melt infiltration’, Adv. Eng. Mater., 2012, 14, 85–91.
302. 2-based composites’, Int. J. Appl. Ceram. Technol., 2007, 4, 184–190.
303. Y. Z., Cai, X. W., Yin, S. W., Fan, L. T., Zhang, L. F., Cheng, Y. G., Wang and H. F., Yin :‘Effects of particle sizes and contents of ceramic fillers on tribological behavior of 3D C/C composites’, Ceram. Int., 2014, 40, 14029–14037.
304. Y. C., Fan, N. H., Shen, T., Koschny and C. M., Soukoulis :‘Tunable terahertz meta-surface with graphene cut-wires’, ACS Photon., 2015, 2, 151–156.
305. L. R., Meza, S., Das and J. R., Greer :‘Strong, lightweight, and recoverable three-dimensional ceramic nanolattices’, Science, 2014, 345, 1322–1326.
306. X., Jiang, B., Liang, R. Q., Li, X. Y., Zou, L. L., Yin and J. C., Cheng :‘Ultra-broadband absorption by acoustic metamaterials’, Appl. Phys. Lett., 2014, 105, 243505.
307. R., Ning, S., Liu, H., Zhang, B., Bian and X., Kong :‘Tunable absorption in graphene-based hyperbolic metamaterials for mid-infrared range’, Physica B:Condens. Matter., 2015, 457, 144–148.
308. M., Faraji, M. K., Moravvej-Farshi and L., Yousefi :‘Tunable THz perfect absorber using graphene-based metamaterials’, Opt. Commun., 2015, 355, 352–355.
309. M., Singh, T., Matsunaga, H. T., Lin, R., Asthana and T., Ishikaw :‘Microstructure and mechanical properties of joints in sintered SiC fiber-bonded ceramics brazed with Ag-Cu-Ti alloy’, Mater. Sci. Eng. A, 2012, 557, 69–76.
310. G. N., Morscher, M., Singh, T., Shpargel and R., Asthana :‘A simple test to determine the effectiveness of different braze compositions for joining Ti-tubes to C/C composite plates’, Mater. Sci. Eng. A, 2006, 418, 19–24.
311. K. L., Lin, M., Singh, R., Asthana and C. H., Lin :‘Interfacial and mechanical characterization of yttria-stabilized zirconia (YSZ) to stainless steel joints fabricated using Ag-Cu-Ti interlayers’, Ceram. Int., 2014, 40, 2063–2071.
312. M., Herrmann, K., Schönfeld, H., Klemm, W., Lippmann, A., Hurtado and A., Michaelis :‘Laser-supported joining of SiC-fiber/SiCN ceramic matrix composites fabricated by precursor infiltration’, J. Eur. Ceram. Soc., 2014, 34, 2913–2924.
313. S., Rizzo, S., Grasso, M., Salvo, V., Casalegno, M. J., Reece and M., Ferraris :‘Joining of C/SiC composites by spark plasma sintering technique’, J. Eur. Ceram. Soc., 2014, 34, 903–913.