Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing

Carbon

Volumn 50, Issue 9, 2012, Pages 3342-3353

  Chung, D D L ^a  

^a UNIVERSITY AT BUFFALO   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON BLACK PASTES; CARBON FIBER POLYMER-MATRIX COMPOSITE; CARBON MATERIAL; CARBON NANOTUBE ARRAY; CEMENT MATRIX COMPOSITE; CIVIL INFRASTRUCTURES; ELECTROMAGNETIC INTERFERENCE SHIELDING; EMERGING APPLICATIONS; EXFOLIATED GRAPHITE; FLEXIBLE GRAPHITE; GRAPHITE NANOPLATELETS; MONOLITHIC MATERIAL; SELF-SENSING; SHORT CARBON FIBERS; STRUCTURE AND PROPERTIES; THERMAL CONTACT; THERMAL INTERFACE MATERIALS;

AIRCRAFT COMMUNICATION; CARBON BLACK; CARBON FIBERS; CARBON NANOFIBERS; ELECTROMAGNETIC PULSE; ELECTROMAGNETIC SHIELDING; GRAPHITE; LIGHT EMITTING DIODES; POLYMER MATRIX COMPOSITES;

CONTACTS (FLUID MECHANICS);

EID: 84860685806     PISSN: 00086223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbon.2012.01.031     Document Type: Article

References (159)

1. D.D.L. Chung Self-monitoring structural materials Mater Sci Eng Rev R22 2 1998 57 78
2. D.D.L. Chung Electrically conductive cement-based materials Adv Cem Res 16 4 2004 167 176
3. P. Chen, and D.D.L. Chung Carbon fiber reinforced concrete as a smart material capable of non-destructive flaw detection Smart Mater Struct 2 1 1993 22 30
4. P. Chen, and D.D.L. Chung Carbon fiber reinforced concrete as an intrinsically smart concrete for damage assessment during static and dynamic loading ACI Mater J 93 4 1996 341 350
5. S. Wen, and D.D.L. Chung Partial replacement of carbon fiber by carbon black in multifunctional cement-matrix composites Carbon 45 3 2007 505 513
6. S. Wen, and D.D.L. Chung Electrical-resistance-based damage self-sensing in carbon fiber reinforced cement Carbon 45 4 2007 710 716
7. X. Fu, W. Lu, and D.D.L. Chung Ozone treatment of carbon fiber for reinforcing cement Carbon 36 9 1998 1337 1345
8. Y. Xu, and D.D.L. Chung Cement-based materials improved by surface treated admixtures ACI Mater J 97 3 2000 333 342
9. D.D.L. Chung Dispersion of short fibers in cement J Mater Civil Eng 17 4 2005 379 383
10. S. Wen, and D.D.L. Chung Strain sensing characteristics of carbon fiber reinforced cement ACI Mater J 102 4 2005 244 248
11. S. Zhu, and D.D.L. Chung Numerical assessment of the methods of measurement of the electrical resistance in carbon fiber reinforced cement Smart Mater Struct 16 2007 1164 1170
12. S. Wen, and D.D.L. Chung The role of electronic and ionic conduction in the electrical conductivity of carbon fiber reinforced cement Carbon 44 11 2006 2130 2138
13. S. Wen, and D.D.L. Chung Electric polarization in carbon fiber reinforced cement Cem Concr Res 31 2 2001 141 147
14. W.J. McCarter, G. Starrs, T.M. Chrisp, and P.F.G. Banfill Complex impedance and dielectric dispersion in carbon fiber reinforced cement matrices J Am Ceram Soc 92 7 2009 1617 1620
15. J. Xu, W. Yao, and R. Wang Nonlinear conduction in carbon fiber reinforced cement mortar Cem Concr Compos 33 2011 444 448
16. J. Xu, W. Zhong, and W. Yao Modeling of conductivity in carbon fiber-reinforced cement-based composite J Mater Sci 45 2010 3538 3546
17. S. Wen, and D.D.L. Chung Piezoresistivity-based strain sensing in carbon fiber reinforced cement ACI Mater J 104 2 2007 171 179
18. S. Wen, and D.D.L. Chung Model of piezoresistivity in carbon fiber cement Cem Concr Res 36 10 2006 1879 1885
19. S. Zhu, and D.D.L. Chung Theory of piezoresistivity for strain sensing in carbon fiber reinforced cement under flexure J Mater Sci 42 15 2007 6222 6233
20. S. Wen, and D.D.L. Chung Uniaxial compression in carbon fiber reinforced cement, sensed by electrical resistivity measurement in longitudinal and transverse directions Cem Concr Res 31 2 2001 297 301
21. S. Wen, and D.D.L. Chung Uniaxial tension in carbon fiber reinforced cement, sensed by electrical resistivity measurement in longitudinal and transverse directions Cem Concr Res 30 8 2000 1289 1294
22. S. Wen, and D.D.L. Chung Self-sensing of flexural damage and strain in carbon fiber reinforced cement and effect of embedded steel reinforcing bars Carbon 44 8 2006 1496 1502
23. D.G. Meehan, S. Wang, and D.D.L. Chung Electrical-resistance-based sensing of impact damage in carbon fiber reinforced cement-based materials J Intell Mater Systems Struct 21 1 2010 83 105
24. S. Wen, and D.D.L. Chung Effects of strain and damage on the strain sensing ability of carbon fiber cement J Mater Civil Eng 18 3 2006 355 360
25. S. Wen, and D.D.L. Chung Effect of moisture on the piezoresistivity of carbon fiber reinforced cement ACI Materials J 105 3 2008 274 280
26. S. Wen, and D.D.L. Chung Spatially resolved self-sensing of strain and damage in carbon fiber cement J Mater Sci 41 15 2006 4823 4831
27. S. Wen, and D.D.L. Chung Carbon fiber-reinforced cement as a thermistor Cem Concr Res 29 6 1999 961 965
28. X. Liu, A. Liu, W. Feng, and W. Yao Study on the temperature-sensitive properties of carbon fiber-reinforced mortar Mater Sci Forum 675-677 2011 1167 1170
29. S. Wen, and D.D.L. Chung Rectifying and thermocouple junctions based on portland cement J Mater Res 16 7 2001 1989 1993
30. S. Wen, and D.D.L. Chung Cement as a thermoelectric material J Mater Res 15 12 2000 2844 2848
31. M. Sun, Z. Li, Q. Mao, and D. Shen Study of the hole conduction phenomenon in carbon fiber-reinforced concrete Cem Concr Res 28 4 1998 549 554
32. S. Wen, and D.D.L. Chung Thermoelectric behavior of carbon-cement composites Carbon 40 13 2002 2495 2497
33. H. Cao, W. Yao, and J. Qin Seebeck effect in graphite-carbon fiber cement based composite Advanced Mater Res 177 2011 566 569
34. M. Saafi Wireless and embedded carbon nanotube networks for damage detection in concrete structures Nanotechnology 20 2009 395502
35. G.Y. Li, P.M. Wang, and X. Zhao Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites Cem Concr Compos 29 2007 377 382
36. X. Yu, and E. Kwon A carbon nanotube/cement composite with piezoresistive properties Smart Mater Struct 18 2009 055010
37. B. Han, X. Yu, and E. Kwon A self-sensing carbon nanotube/cement composite for traffic monitoring Nanotechnology 20 2009 445501
38. B. Han, X. Yu, E. Kwon, and J. Ou Piezoresistive multi-walled carbon nanotubes filled cement-based composites Sensor Lett 8 2010 344 348
39. J. Luo, Z. Duan, T. Zhao, and Q. Li Hybrid effect of carbon fiber on piezoresistivity of carbon nanotube cement-based composite Advanced Mater Res 143-144 2011 639 643
40. H. Xiao, H. Li, and J. Ou Modeling of piezoresistivity of carbon black filled cement-based composites under multi-axial strain Sensors Actuat A Phys 160 2010 87 93
41. C. Xin, W. Shoude, L. Lingchao, and H. Shifeng Influence of preparation process on piezo-conductance effect of carbon fiber sulfoaluminate cement composite J Compos Mater 45 20 2011 2033 2037
42. Chung DDL. Damage detection using self-sensing concepts. J Aerospace Eng (Proceedings of the Institution of Mechanical Engineers, Part G) 2007;221(G4):509-520.
43. S. Wang, and D.D.L. Chung Negative piezoresistivity in continuous carbon fiber epoxy-matrix composite J Mater Sci 42 13 2007 4987 4995
44. Z. Schulte, and C. Baron Load and failure analyses of CFRP laminates by means of electrical resistivity measurements Compos Sci Technol 36 1 1989 63 76
45. S. Wang, and D.D.L. Chung Self-sensing of flexural strain and damage in carbon fiber polymer-matrix composite by electrical resistance measurement Carbon 44 13 2006 2739 2751
46. S. Wang, and D.D.L. Chung Piezoresistivity in continuous carbon fiber polymer-matrix composite Polym Compos 21 1 2000 13 19
47. S. Wang, D. Wang, D.D.L. Chung, and J.H. Chung Method of sensing impact damage in carbon fiber polymer-matrix composite by electrical resistance measurement J. Mater. Sci. 41 8 2006 2281 2289
48. D. Wang, S. Wang, D.D.L. Chung, and J.H. Chung Comparison of the electrical resistance and potential techniques for the self-sensing of damage in carbon fiber polymer-matrix composites J Intell Mater Syst Struct 17 10 2006 853 861
49. S. Zhu, and D.D.L. Chung Analytical model of piezoresistivity for strain sensing in carbon fiber polymer-matrix structural composite under flexure Carbon 45 8 2007 1606 1613
50. D. Wang, and D.D.L. Chung Through-thickness stress sensing of carbon fiber polymer-matrix composite by electrical resistance measurement Smart Mater Struct 16 2007 1320 1330
51. X. Wang, S. Wang, and D.D.L. Chung Sensing damage in carbon fiber and its polymer-matrix and carbon-matrix composites by electrical resistance measurement J Mater Sci 34 1999 2703 2713
52. J.C. Abry, S. Bochard, A. Chateauminois, M. Salvia, and G. Giraud In situ detection of damage in CFRP laminates by electrical resistance measurements Compos Sci Tech 59 1999 925 935
53. Z.H. Xia, and W.A. Curtin Damage detection via electrical resistance in CFRP composites under cyclic loading Compos Sci Technol 68 2008 2526 2534
54. Z.H. Xia, and W.A. Curtin Modeling of mechanical damage dection in CFRPs via electrical resistance Compos Sci Technol 67 2007 1518 1529
55. A. Boschetti-de-Fierro, R. Pardey, V. Savino, and A.J. Muller Piezoresistive behavior of epoxy matrix-carbon fiber composites with different reinforcement arrangements J Appl Polymer Sci 111 2009 2851 2858
56. S. Wang, D.P. Kowalik, and D.D.L. Chung Self-sensing attained in carbon fiber polymer-matrix structural composites by using the interlaminar interface as a sensor Smart Mater Struct 13 3 2004 570 592
57. S. Wang, and D.D.L. Chung The interlaminar interface of a carbon fiber epoxy-matrix composite as an impact sensor J Mater Sci 40 2005 1863 1867
58. S. Wang, and D.D.L. Chung Carbon fiber polymer-matrix composite interfaces as thermocouple junctions Comp Interfaces 6 6 1999 519 530
59. V.H. Guerrero, S. Wang, S. Wen, and D.D.L. Chung Thermoelectric property tailoring by composite engineering J Mater Sci 37 19 2002 4127 4136
60. S. Wang, and D.D.L. Chung Temperature/light sensing using carbon fiber polymer-matrix composite Composites B 30 6 1999 591 601
61. S. Wang, and D.D.L. Chung Consolidation of carbon fiber laminae during polymer-matrix composite fabrication, studied by electrical resistance measurement Polym Compos 22 1 2001 42 46
62. Z. Mei, V.H. Guerrero, D.P. Kowalik, and D.D.L. Chung Mechanical damage and strain in carbon fiber thermoplastic-matrix composite, sensed by electrical resistivity measurement Polym Compos 23 3 2002 425 432
63. Z. Mei, and D.D.L. Chung Thermoplastic matrix phase transitions in a carbon fiber composite, studied by contact electrical resistivity measurement of the interface between two unbonded laminae Polym Compos 23 5 2002 824 827
64. Z. Mei, and D.D.L. Chung Glass transition and melting behavior of carbon fiber reinforced thermoplastic composite, studied by electrical resistance measurement Polym Compos 21 5 2000 711 715
65. Z. Mei, and D.D.L. Chung Cold-crystallization of polyphenylene sulfide, studied by measuring the electrical resistance of a carbon-fiber polyphenylene-sulfide-matrix composite Polym Polym Compos 8 5 2000 319 324
66. Z. Mei, and D.D.L. Chung Thermal history of carbon fiber polymer-matrix composite, evaluated by electrical resistance measurement Thermochim Acta 369 1-2 2001 87 93
67. D.D.L. Chung Electromagnetic interference shielding effectiveness of carbon materials Carbon 39 2 2001 279 285
68. X. Luo, and D.D.L. Chung Electromagnetic interference shielding reaching 130 dB using flexible graphite Carbon 34 10 1996 1293 1294
69. X. Luo, R. Chugh, B.C. Biller, Y.M. Hoi, and D.D.L. Chung Electronic applications of flexible graphite J Electron Mater 31 5 2002 535 544
70. X. Shui, and D.D.L. Chung Submicron diameter nickel filaments and their polymer-matrix composites J Mater Sci 35 2000 1773 1785
71. X. Shui, and D.D.L. Chung 0.4 μm diameter nickel filament silicone-matrix resilient composites for electromagnetic interference shielding J Electron Packaging 119 4 1997 236 238
72. X. Na, J. Qingjie, Z. Chongguang, and W. Chenglong The influence of nano-Fe on the electromagnetic shielding properties of nano-Fe/carbon fiber/LDPE composites E-Polymers 094 2009 1 14
73. Z.P. Wu, M.M. Li, Y.Y. Hu, Y.S. Li, Z.X. Wang, and Y.H. Yin Electromagnetic interference shielding of carbon nanotube macrofilms Scripta Mater 64 2011 809 812
74. V.K. Sachdev, K. Patel, S. Bhattacharya, and R.P. Tandon Electromagnetic interference shielding of graphite/acrylonitrile butadiene styrene composites J Appl Polymer Sci 120 2011 1100 1105
75. Rahaman M, Chaki TK, Khastgir D. High-performance EMI shielding materials based on short carbon fiber-filled ethyelene vinyl acetate copolymer, acrylonitrile butadiene copolymer, and their blends. Polym Compos 2011; online.
76. M. Rahaman, T.K. Chaki, and D. Khastgir Development of high performance EMI shielding material from EVA, NBR, and their blends: effect of carbon black structure J Mater Sci 46 2011 3989 3999
77. W. Jou, H. Cheng, and C. Hsu The electromagnetic shielding effectiveness of carbon nanotubes polymer composites J Alloys Compounds 434-435 2007 641 645
78. I. Mazov, V. Kuznetsov, S. Moseenkov, A. Usoltseva, A. Romanenko, and O. Anikeeva Electromagnetic shielding properties of MWCNT/PMMA composites in Ka-band Phys Status Solidi B 246 11-12 2009 2662 2666
79. J. Yun, J.S. Im, H. Kim, and Y. Lee Effect of oxyfluorination on electromagnetic interference shielding of polyaniline-coated multi-walled carbon nanotubes Colloid Polym Sci 289 2011 1749 1755
80. Y. Huang, H. Zhang, and M. Zhang Investigation on the preparation of silver coated carbon nanotubes (SCCNT) and SCCNT/polyacrylate composite coatings for electromagnetic interference shielding Integrated Ferroelectrics 128 2011 21 29
81. W. Zhao, M. Li, Z. Zhang, and H. Peng EMI shielding effectiveness of silver nanoparticle-decorated multi-walled carbon nanotube sheets Int J Smart Nano Mater 1 4 2010 249 260
82. A. Gupta, and V. Choudhary Electromagnetic interference shielding behavior of poly(trimethylene terephthalate)/multi-walled carbon nanotube composites Compos Sci Tech 71 2011 1563 1568
83. Sohi NJS, Rahaman M, Khastgir D. Dielectric property and electromagnetic interference shielding effectiveness of ethylene vinyl acetate-based conductive composites: effect of different type of carbon fillers. Polym Compos 2011; online.
84. L.L. Vovchenko, L.Y. Matzui, V.V. Oliynyk, and V.L. Launetz The effect of filler morphology and distribution on electrical and shielding properties of graphite-epoxy composites Mol Cryst Liq Cryst 535 2011 179 188
85. 2-embedded electrospun carbon fibers used for efficient electromagnetic interference shielding J Phys Chem Solids 72 2011 1175 1179
86. M.H. Al-Saleh, and U. Sundararaj Electrically conductive carbon nanofiber/polyethylene composite: effect of melt mixing conditions Polym Adv Technol 22 2011 246 253
87. S. Wen, and D.D.L. Chung Pitch-matrix composites for electrical, electromagnetic and strain-sensing applications J Mater Sci 40 2005 3897 3903
88. A. Das, H.T. Hatvaci, M.K. Tiwari, I.S. Bayer, D. Erricolo, and C.M. Megaridis Superhydrophobic and conductive carbon nanofiber/PTFE composite coatings for EMI shielding J Colloid Interface Sci 353 2011 311 315
89. N.C. Das, D. Khastgir, T.K. Chaki, and A. Chakraborty Electromagnetic interference shielding effectiveness of carbon black and carbon fibre filled EVA and NR based composites Composites A 31 2000 1069 1081
90. A. Gupta, and V. Choudhary Electrical conductivity and shielding effectiveness of poly(trimethylene terephthalate)/multiwalled carbon nanotube composites J Mater Sci 46 2011 6416 6423
91. B.P. Singh Prabha, Saini P, Gypta T, Garg P, Kumar G, Pande I, Pande S, Seth RK, Dhawan SK, Mathur RB. Designing of multiwalled carbon nanotubes reinforced low density polyethylene nanocomposites for suppression of electromagnetic radiation J Nanopart Res 13 2011 7065 7074
92. A.S. Hoang Electrical conductivity and electromagnetic interference shielding characteristics of multiwalled carbon nanotube filled polyurethane composite films Adv Nat Sci Nanosci Nanotechnol 2 025007 2011 1 5
93. V. Eswaraiah, V. Sankaranarayanan, and S. Ramaprabhu Functionalized graphene-PVDF foam composites for EMI shielding Macromol Mater Eng 296 2011 894 898
94. S.H. Park, P. Theilmann, K. Yang, A.M. Rao, and P.R. Bandaru The influence of coiled nanostructure on the enhancement of dielectric constants and electromagnetic shielding efficiency in polymer composites Appl Phys Lett 96 2010 043115
95. Y. Yang, M.C. Gupta, K.L. Dudley, and R.W. Lawrence Novel carbon nanotube-polystyrene foam composites for electromagnetic interference shielding Nano Lett 5 11 2005 2131 2134
96. I.W. Nam, H.K. Lee, and J.H. Jang Electromagnetic interference shielding/absorbing characteristics of CNT-embedded epoxy composites Composites A 42 2011 1110 1118
97. H. Zhang, Q. Yan, W. Zheng, Z. He, and Z. Yu Tough graphene-polymer microcellular foams for electromagnetic interference shielding ACS Appl Mater Interfaces 3 2011 918 924
98. J.G. Park, J. Louis, Q. Cheng, J. Bao, Smithyman, and R. Liang Electromagnetic interference shielding properties of carbon nanotube buckpaper composites Nanotechnology 20 2009 415702
99. J. Cao, and D.D.L. Chung Coke powder as an admixture in cement for electromagnetic interference shielding Carbon 41 12 2003 2433 2436
100. A.P. Singh, M. Mishra, Chandra, and S.K. Dhawan Graphene oxide/ferrofluid/cement composites for electromagnetic interference shielding application Nanotechnology 22 465701 2011 1 9
101. X. Fu, and D.D.L. Chung Submicron-diameter-carbon-filament cement-matrix composites Carbon 36 4 1998 459 462
102. S. Muthusamy, and D.D.L. Chung Carbon fiber cement-based materials for electromagnetic interference shielding ACI Mater J 107 6 2010 603 611
103. S. Huang, G. Chen, Q. Luo, and Y. Xu Electromagnetic shielding effectiveness of carbon black-carbon fiber cement based materials Adv Mater Res 168-170 2011 1438 1442
104. J. Cao, and D.D.L. Chung Colloidal graphite as an admixture in cement and as a coating on cement for electromagnetic interference shielding Cem Concr Res 33 11 2003 1737 1740
105. Luo X, Chung DDL. Electromagnetic interference shielding using continuous carbon fiber carbon-matrix and polymer-matrix composites. Composites: Part B, 1999:30(3):227-231.
106. J. Wu, and D.D.L. Chung Increasing the electromagnetic interference shielding effectiveness of carbon fiber polymer-matrix composite by using activated carbon fibers Carbon 40 ER3 2002 445 447
107. Kearney A, Li L, Sanford S. Interaction between TIM1 and TIM2 for mechanical robustness of integrated heat spreader. 25th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2009, SEMI-Therm 2009; p. 293-298.
108. X. Li, X. Chen, and G. Lu Reliability of high-power light emitting diode attached with different thermal interface materials J Electron Packaging 132 031011 2010 1 5
109. Y. Aoyagi, and D.D.L. Chung Effects of antioxidants and the solid component on the thermal stability of polyol-ester-based thermal pastes J Mater Sci 42 7 2007 2358 2375
110. R. Kempers, P. Kolodner, A. Lyons, and A.J. Robinson A high-precision apparatus for the characterization of thermal interface materials Rev Sci Instruments 80 095111 2009 1 11
111. Z. Liu, and D.D.L. Chung Calorimetric evaluation of phase change materials for use as thermal interface materials Thermochim Acta 366 2 2001 135 147
112. Y. Aoyagi, and D.D.L. Chung Antioxidant-based phase-change thermal interface materials with high thermal stability J Electron Mater 37 4 2008 448 461
113. C. Leong, Y. Aoyagi, and D.D.L. Chung Carbon-black thixotropic thermal pastes for improving thermal contacts J Electron Mater 34 10 2005 1336 1341
114. C. Leong, Y. Aoyagi, and D.D.L. Chung Carbon black pastes as coatings for improving thermal gap-filling materials Carbon 44 3 2006 435 440
115. T.A. Howe, C. Leong, and D.D.L. Chung Comparative evaluation of thermal interface materials for improving the thermal contact between an operating computer microprocessor and is heat sink J Electron Mater 35 8 2006 1628 1635
116. C. Lin, and D.D.L. Chung Nanoclay paste as thermal interface material for smooth surfaces J Electron Mater 37 11 2008 1698 1709
117. C. Lin, and D.D.L. Chung Nanostructured fumed metal oxides for thermal interface pastes J Mater Sci 42 22 2007 9245 9255
118. C. Lin, and D.D.L. Chung Graphite nanopletelet pastes versus carbon black pastes as thermal interface materials Carbon 47 1 2009 295 305
119. C. Leong, and D.D.L. Chung Carbon black dispersions and carbon-silver combinations as thermal pastes that surpass commercial silver and ceramic pastes in providing high thermal contact conductance Carbon 42 11 2004 2323 2327
120. Das RN, Calmidi V, Poliks MD, Markovich VR. Nanofluids, nanogels and nanopastes for electronic packaging. IEEE Electronic Components and Technology Conference 2010; p. 1231-1238.
121. Liu J, Olorunyomi MO, Li X, Shangguan D. Manufacturing and characterization of nano silver particles based thermal interface material. IEEE Electronic and Technology Conference 2007; p. 475-479.
122. J. Xu, A. Munari, E. Dalton, A. Mathewson, and K.M. Razeeb Silver nanowire array-polymer composite as thermal interface material J Appl Phys 106 124310 2009 1 7
123. R. Kempers, A.J. Robinson, and A. Lyons Characterization of thermal contact resistance in metal micro-textured thermal interface materials using electrical contact resistance measurements Defect Diffus Forum 297-301 2010 1190 1198
124. Jarrett RN, Merritt CK, Ross JP, Hisert J. Comparison of test methods for high performance thermal interface materials. IEEE SEMI-THERM Symposium, 2007; p. 83.
125. Chaowasakoo T, Ng TH, Songninluck J, Stern MB, Ankireddi S. Indium solder as a thermal interface material using fluxless bonding technology. 25th IEEE SEMI-THERM, Symposium, 2009; p. 180.
126. Too SS, Touzebaev M, Khan M, Master R, Diep J, Keok K. Indium thermal interface material development for microprocessors. 25th IEEE SEMI-THERM, Symposium, 2009; p. 186.
127. I. Dutta, R. Raj, P. Kumar, T. Chen, C.M. Nagaraj, and J. Liu Liquid phase sintered solders with indium as minority phase for next generation thermal interface material applications J Electron Mater 38 12 2009 2735 2745
128. Carlberg B, Wang T, Fu Y, Liu J, Shangguan D. Nanostructured polymer-metal composite for thermal interface material applications. IEEE Electronic Components and Technology Conference, 2008; p. 191-197.
129. Reddy GP, Raj PM, Nataraj N, Rajesh PM, Jha G, Choudhury A, Kumbhat N, Tummala R. Co-electrodeposited graphite and diamond-loaded solder nanocomposites as thermal interface materials. IEEE Electronic Components and Technology Conference, 2010; p. 1708-1712.
130. A. Hamdan, A. McLanahan, R. Richards, and C. Richards Exp Therm Fluid Sci 35 2011 1250 1254
131. J. Chen, Y. Lin, Y. Lin, and M. Rau Preparation and characterization of HTPB/AlN thermal paste for application of thermal interface material in high power LED Polym Mater Sci Eng 105 2011 961 964
132. Y. Xu, C. Leong, and D.D.L. Chung Carbon nanotube dispersions as thermal pastes J Electron Mater 36 9 2007 1181 1187
133. R. Cross, B.A. Cola, T. Fisher, X. Xu, K. Gall, and S. Graham A metallization and bonding approach for high performance carbon nanotube thermal interface materials Nanotechnology 21 445705 2010 1 8
134. X. Liu, A.M. Cassell, and B.A. Cruden Implications of catalyst control for carbon nanotube based thermal interface materials J Appl Phys 104 084310 2008 1 5
135. H. Wang, J. Feng, X. Hu, and K.M. Ng Synthesis of aligned carbon nanotubes on double-sided metallic substrate by chemical vapor deposition J Phys Chem C 111 2007 12617 12624
136. K. Zhang, Y. Chai, M.M.F. Yuen, D.G.W. Xiao, and P.C.H. Chan Carbon nanotube thermal interface material for high-brightness light-emitting-diode cooling Nanotechnology 19 215706 2008 1 8
137. H. Wang, J.Y. Feng, X.J. Hu, and K.M. Ng Reducing thermal contact resistance using a bilayer aligned CNT thermal interface material Chem Eng Sci 65 2010 1101 1108
138. Y. Zhang, Y. Xu, E. Suhir, C. Gu, and X. Liu Compliance properties study of carbon nanofibres (CNFs) array as thermal interface material J Phys D 41 155105 2008 1 5
139. Z.L. Gao, K. Zhang, and M.M.F. Yuen Fabrication of carbon nanotube thermal interface material on aluminum alloy substrates with low pressure CVD Nanotechnology 22 265611 2011 1 8
140. Rosshirt M, Fabris D, Cardenas C, Wilhite P, Tu T, Yang CY. Comparison of carbon-based nanostructures with commercial products as thermal interface materials. Mater Res Soc Symp Proc 2009;1158-F03-03.
141. D. Fabris, M. Rosshirt, C. Cardenas, P. Wilhite, T. Yamada, and C.Y. Yang Application of carbon nanotubes to thermal interface materials J Electron Packaging 133 020902 2011 1 6
142. A. Hamdan, J. Cho, R. Johnson, J. Jiao, D. Bahr, and R. Richards Evaluation of a thermal interface material fabricated using thermocompression bonding of carbon nanotube turf Nanotechnology 21 015702 2010 1 8
143. M.O. Memom, S. Haillot, and K. Lafdi Carbon nanofiber based buckypaper used as a thermal interface material Carbon 49 2011 3820 3828
144. Taira Y, Kohara S, Sueoka K. Performance improvement of stacked graphite sheets for cooling applications. IEEE Electronic Components and Technology Conference 2008; p. 760-764.
145. J. Liu, P. Kumar, I. Dutta, R. Raj, R. Sidhu, and M. Renavikar Liquid phase sintered Cu-In composite solders for thermal interface material and interconnect applications J Mater Sci 46 2011 7012 7025
146. L. Hu, W. Evans, and P. Keblinski Thermal transport in self-assembled conductive networks for thermal interface materials J Electron Packaging 133 021002 2011 1 4
147. K.M. Razeeb, and S. Roy Thermal diffusivity of nonfractal and fractal nickel nanowires J Appl Phys 103 084302 2008 1 7
148. H. Chou, S. Yang, S. Wang, and J.C. Sung Thermal conductivity of diamond-containing grease J Electron Packaging 132 041015 2010 1 7
149. S. Kanuparthi, G. Subbarayan, T. Siegmund, and B. Sammakia The effect of polydispersivity on the thermal conductivity of particulate thermal interface materials IEEE Trans Components Packaging Technol 32 2 2009 424 434
150. Munari A, Xu J, Dalton E, Mathewson A, Razeeb KM. Metal nanowire-polymer nanocomposite as thermal interface material. IEEE Electronic Components and Technology Conference 2009; p. 448-452.
151. S. Shaikh, L. Li, K. Lafdi, and J. Huie Thermal conductivity of an aligned carbon nanotube array Carbon 45 2007 2608 2613
152. Moon K, Lin W, Jiang H, Ko H, Zhu L, Wong CP. Surface treatment of MWCNT array and its polymer composites for TIM application. IEEE Electronic Components and Technology Conference 2008; p. 234-237.
153. Lin W, Olivares RV, Liang Q, Zhang R, Moon K, Wong CP. Vertically aligned carbon nanotubes on copper substrates for applications as thermal interface materials: from synthesis to assembly. IEEE Electronic Components and Technology Conference 2009; p. 441-447.
154. Lin W, Wong CP. Vertically aligned carbon nanotubes for thermal interface materials: quality control, alignment improvement and laser flash measurement. IEEE Electronic Components and Technology Conference 2010; p. 967-972.
155. W. Lin, K. Moon, and C.P. Wong A combined process of in situ functionalization and microwave treatment to achieve ultrasmall thermal expansion of aligned carbon nanotube-polymer nanocomposites: toward applications as thermal interface materials Adv Mater 21 2009 2421 2424
156. C. Lin, and D.D.L. Chung Effect of carbon black structure on the effectiveness of carbon black thermal interface pastes Carbon 45 15 2007 2922 2931
157. C. Lin, and D.D.L. Chung Rheological behavior of thermal interface pastes J Electron Mater 38 10 2009 2069 2084
158. P. Pour Shahid Saeed Abadi, C. Leong, and D.D.L. Chung Factors that govern the performance of thermal interface materials J Electron Mater 38 1 2009 175 192
159. K. Hu, and D.D.L. Chung Flexible graphite modified by carbon black paste for use as a thermal interface material Carbon 49 2011 1075 1086