Influence of pyrolysis conditions on fabrication of polymer-derived BN fiber for wave transparent application

Composites Part B: Engineering

Volumn 51, Issue , 2013, Pages 254-259

  Lei, Yongpeng ^a   Wang, Yingde ^a   Xue, Jingen ^a   Song, Yongcai ^a  

^a NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY   (China)

Author keywords

A. Ceramic fiber; B. Electrical properties; E. Fibre conversion processes; E. Heat treatment

Indexed keywords

CONVERSION PROCESS; E. HEAT TREATMENT; LOW DIELECTRIC CONSTANTS; NEAR STOICHIOMETRIC; POLY[(ALKYLAMINO)BORAZINE]; PYROLYSIS TEMPERATURE; STRUCTURAL EVOLUTION; STRUCTURAL-FUNCTIONAL;

ATMOSPHERIC TEMPERATURE; CARBON; CERAMIC FIBERS; ELECTRIC PROPERTIES; HEATING; HEATING RATE; POLYMERS; TENSILE STRENGTH;

FIBERS;

EID: 84877812898     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2013.03.011     Document Type: Article

References (31)

1. R.T. Paine, and C.K. Narula Synthetic routes to boron nitride Chem Rev 90 1990 73 91
2. W.M. Guo, and H.N. Xiao Mechanisms and modeling of oxidation of carbon felt/carbon composites Carbon 45 2007 1058 1065
3. U. Kusari, Z. Bao, Y. Cai, G. Ahmad, K.H. Sandhage, and L.G. Sneddon Formation of nanostructured, nanocrystalline boron nitride microparticles with diatom-derived 3-D shapes Chem Commun 11 2007 1177 1179
4. f/SiC composites with engineered fibre-matrix interfaces Compo Sci Technol 71 2011 699 704
5. M. Takeda, A. Saeki, J.I. Sakamoto, Y. Imai, and H. Ichikawa Properties of polycarbosilane-derived silicon carbide fibers with various C/Si compositions Compo Sci Technol 59 1999 787 792
6. V.M. Gudapati, V.P. Veedu, and M.N. Ghasemi-Nejhad Polymeric precursor pyrolysis for flexural property evaluation of continuous fiber ceramic nanocomposites with nanoparticles Compo Sci Technol 66 2006 3230 3240
7. B. Toury, P. Miele, D. Cornu, H. Vincent, and J. Bouix Boron nitride fibers prepared from symmetric and asymmetric alkylaminoborazine Adv Funct Mater 12 2002 228 234
8. Y.X. Yu, J.H. Tai, X.Y. Tang, Y.D. Guo, M. Tang, and X.D. Li Continuous Si-C-O-Al fiber derived from aluminum-containing polycarbosilane precursor Composites Part A 39 2008 1101 1105
9. P. Colombo, G. Mera, R. Riedel, and G.D. Sorarù Polymer-derived caramic: 40 years of research and innovation in advanced ceramics J Am Ceram Soc 93 2010 1805 1837
10. T. Ishikawa, H. Yamaoka, Y. Harada, T. Fujii, and T. Nagasawa A general process for in situ formation of functional surface layers on ceramics Nature 416 2002 64 67
11. Q.L. Fang, X.D. Li, A.P. Tuan, J. Perumal, and D.P. Kim Direct pattern transfer using an inorganic polymer-derived silicate etch mask J Mater Chem 21 2011 4657 4662
12. Y.P. Lei, Y.D. Wang, Y.C. Song, Y.H. Li, H. Wang, and C. Deng Facile synthesis of a melt-spinnable polyborazine from asymmetric alkylaminoborazine Chinese Chem Lett 21 2010 1079 1082
13. Y.P. Lei, Y.D. Wang, Y.C. Song, Y.H. Li, C. Deng, and H. Wang Nearly stoichiometric BN fiber with low dielectric constant derived from poly[(alkylamino)borazine] Mater Lett 65 2011 157 159
14. S. Bernard, D. Cornu, P. Miele, H. Vincent, and J. Bouix Pyrolysis of poly[2,4,6-tri(methylamino)borazine] and its conversion into BN fibers J Organomet Chem 657 2002 91 97
15. S. Duperrier, C. Gervais, S. Bernard, D. Cornu, F. Babonneau, and P. Miele Controlling the chemistry, morphology and structure of boron nitride-based ceramic fibers through a comprehensive mechanistic study of the reactivity of spinnable polymers with ammonia J Mater Chem 16 2006 3126 3138
16. S.N. Patankar Weibull distribution as applied to ceramic fibres J Mater Sci Lett 10 1991 1176 1181
17. D. Cornu, P. Miele, B. Toury, B. Bonnetot, H. Mongeot, and J. Bouix Boron nitride matrices and coatings from boryl borazine molecular precursors J Mater Chem 9 1999 2605 2610
18. Y.P. Lei, Y.D. Wang, Y.C. Song, C. Deng, and H. Wang Nearly stoichiometric BN fiber by curing and thermolysis of a novel poly[(alkylamino)borazine] Ceram Int 37 2011 1795 1800
19. Paciorek KJL, Harris DH, Kratzer RH. Boron-nitrogen polymers. I Mechanistic studies of borazines pyrolyses. J Polym Sci 1986; 24:173-85.
20. Y. Kimura, Y. Kubo, and N. Hayashi Boron nitride preceramics based on B,B,B-triaminoborazine J Inorg Organomet P 2 1992 231 241
21. Choong Kwet Yive NS, Corriu RJP, Leclercq D, Murtin PH, Vioux A. Thermogravimetric analysis/mass spectrometry investigation of the thermal conversion of organosilicon precursors into ceramics under argon and ammonia. 2. Poly(silazanes). Chem Mater 1992; 4:1263-71.
22. P. Dibandjo, L. Bois, F. Chassagneux, D. Cornu, J.M. Letoffe, and B. Toury Synthesis of boron nitride with ordered mesostructure Adv Mater 17 2005 571 574
23. H.B. Li, L.T. Zhang, L.F. Cheng, Z.J. Yu, M.H. Huang, and H.B. Tu Effect of curing and pyrolysis processing on the ceramic yield of a highly branched polycarbosilane J Mater Sci 44 2009 721 725
24. D. Galusek, S. Reschke, R. Riedel, W. Dreßler, P. Šajgalík, and Z. Lenčéš In-situ carbon content adjustment in polysilazane derived amorphous SiCN bulk ceramics J Euro Ceram Soc 19 1999 1911 1921
25. Y. Tang, J. Wang, X.D. Li, Z.F. Xie, H. Wang, and W.H. Li Polymer-derived SiBN fiber for high-temperature structural/functional applications Chem Eur J 16 2010 6458 6462
26. S. Bernard, F. Chassagneux, M.P. Berthet, H. Vincent, and J. Bouix Structural and mechanical properties of a high-performance BN fibre J Euro Ceram Soc 22 2002 2047 2059
27. E.J.M. Hamilton, S.E. Dolan, C.M. Mann, H.O. Colijn, C.A. McDonald, and S.G. Shore Preparation of amorphous boron nitride and its conversion to a turbostratic, tubular form Science 260 1993 659 661
28. 2 composites fiber by thermal decomposition of polycarbosilan-tetrabutyl titanate hybrid precursor J Mater Chem 19 2009 5637 5642
29. Y. Kimura, Y. Kubo, and N. Hayashi High-performance boron-nitride fibers from poly(borazine) preceramics Compo Sci Technol 51 1994 173 179
30. B. Toury, and P. Miele A new polyborazine-based route to boron nitride fibres J Mater Chem 14 2004 2609 2611
31. P. Toutois, P. Miele, S. Jacques, D. Cornu, and S. Bernard Structural and mechanical behavior of boron nitride fibers derived from poly[(methylamino) borazine] precursors: optimization of the curing and pyrolysis procedures J Am Ceram Soc 89 2006 42 49