All-Oxide Ceramic Matrix Composites with Porous Matrices

Ceramic Matrix Composites: Fiber Reinforced Ceramics and their Applications

Volumn , Issue , 2008, Pages 205-229

  Schmücker, Martin ^a   Mechnich, Peter ^a  

^a GERMAN AEROSPACE CENTER DLR   (Germany)

Author keywords

All oxide ceramic matrix composites; Applications; Ceramic matrix composites; Oxide oxide CMCs; Porous matrices; Porous oxide oxide CMCs; Protective coatings

Indexed keywords

EID: 77952355499     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527622412.ch9     Document Type: Chapter

References (50)

1. Koyama, T., Hayashi, S., Yasumori, A., Okada, K., Schmücker, M. and Schneider, H. (1996) Microstructure and mechanical properties of mullite/zirconia composites prepared from alumina and zircon under various firing conditions. Journal of the European Ceramic Society, 16, 231-37.
2. Hirata, Y., Matsushita, S., Ishihara, Y. and Katsuki, H. (1991) Colloidal processing and mechanical properties of whisker-reinforced mullite matrix composites. Journal of the American Ceramic Society, 74, 2438-42.
3. Chawla, K.K. (1998) Composite Materials, Science and Engineering, 2nd edn, Springer, New York, pp. 212-51.
4. Strife, J.R. and Sheehan, J.E. (1988) Ceramic coatings for carbon-carbon composites. Ceramic Bulletin, 67, 369-74.
5. Chawla, K.K. (2003) Ceramic matrix composites, 2nd edn, Kluwer Academic Publishers, Boston, pp. 291-354.
6. Levi, C.G., Yang, J.Y., Dalgleish, B.J., Zok, F.W. and Evans, A.G. (1998) Processing and performance of an alloxide ceramic composite. Journal of the American Ceramic Society, 81, 2077-86.
7. Kingery, W.D., Bowen, H.K. and Uhlmann, D.R. (1975) Introduction to Ceramics, 2nd edn, John Wiley & Sons, New York, p. 794.
8. Wu, S., Holz, D. and Claussen, N. (1993) Mechanisms and kinetics of reaction bonded aluminium oxide ceramics. Journal of the American Ceramic Society, 76, 970-80.
9. Holz, D., Pagel, S., Bowen, C., Wu, S. and Claussen, N. (1996) Fabrication of low-to-zero shrinkage reaction bonded mullite. Journal of the European Ceramic Society, 16, 255-60.
10. 2-doped reaction-bonded mullite. Journal of the American Ceramic Society, 82, 2517-22.
11. Kerans, R.J., Hay, R.S., Parthasarathy, T.A. and Cinibulk, M.K. (2002) Interface design for oxidation-resistant ceramic composites. Journal of the American Ceramic Society, 85, 2599-632.
12. Lange, F.F., Tu, W.C. and Evans, A.G. (1995) Processing of damage-tolerant, oxidation resistant ceramic matrix composites by precursor infiltration and pyrolysis method. Materials Science and Engineering, A195, 145-50.
13. Zok, F.W. (2006) Developments in oxide fiber composites. Journal of the American Ceramic Society, 89, 3309-24.
14. Staehler, J.M. and Zawada, L.P. (2000) Performance of four ceramic-matrix composite divergent flap inserts following ground testing on an F110 turbofan engine. Journal of the American Ceramic Society, 83, 1727-38.
15. Zawada, L.P., Hay, R.S., Lee, S.S. and Staehler, J. (2003) Characterization and high-temperature mechanical behavior of an oxide/oxide composite. Journal of the American Ceramic Society, 86, 581-90.
16. Tandon, G.P., Buchanan, D.J., Pagano, N.J. and John, R. (2001) Analytical and experimental characterization of thermomechanical properties of a damaged woven oxide-oxide composite, in 25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures (eds M. Singh and T. Jessen), American Ceramic Society, Westerville, OH, pp. 687-94.
17. Simon, R.A. (2005) Progress in processing and performance of porous-matrix oxide/oxide composites. International Journal of Applied Ceramic Technology, 2 (2), 141-9.
18. Kanka, B. Einstellung des Faservolumengehaltes in oxidkeramischen Faser-Verbundwerkstoffen. Patent pending EU 061144924.1-2111.
19. Pyrz, R. (1994) Quantitative description of the microstructure of composites. Composites Science and Technology, 50, 197-208.
20. Heathcote, J.A., Gang, X.Y., Yang, J.Y., Ramamurtz, U. and Zok, F.W. (1999) Inplane mechanical properties of an alloxide ceramic composite. Journal of the American Ceramic Society, 82, 2721-30.
21. Levi, C.G., Zok, F.W., Yang, J.-Y., Mattoni, M. and Löfvander, J.P.A. (1999) Microstructural design of stable porous matrices for all-oxide ceramic composites. Zeitschrififür Metallkunde, 90, 1037-47.
22. Tu, W.C., Lange, F.F. and Evans, A.G. (1996) Concept for a damage-tolerant ceramic composite with "strong" interfaces. Journal of the American Ceramic Society, 79, 417-24.
23. Schmücker, M., Grafmüller, A. and Schneider, H. (2003) Mesostructure of Whipox all oxide CMCs. Composites A, 34, 613-22.
24. Zok, F.W. and Levi, C.G. (2001) Mechanical properties of porous-matrix ceramic composites. Advanced Engineering Materials, 3, 15-23.
25. She, J., Mechnich, P., Schneider, H., Schmücker, M. and Kanka, B. (2002) Effect of cyclic infiltrations on microstructure and mechanical behavior of porous mullite/mullite composites. Materials Science and Engineering, A325, 19-24.
26. Göring, J., Hackemann, S. and Schneider, H. (2003) Oxid/Oxid-Verbundwerkstoffe: Herstellung, Eigenschaften und Anwendungen(in German), in Keramische Verbundwerkstoffe (ed. W. Krenkel), Wiley-VCH Verlag GmbH, Weinheim, pp. 123-48.
27. Hackemann, S. unpublished.
28. Carelli, E.A.V., Fujita, H., Yang, J.Y. and Zok, F.W. (2002) Effects of thermal aging on the mechanical properties of a porous-matrix ceramic composite. Journal of the American Ceramic Society, 85, 595-602.
29. Schmücker, M., Kanka, B. and Schneider, H. (2000) Temperature-induced fiber/matrix interactions in porous alumino silicate ceramic matrix composites. Journal of the European Ceramic Society, 20, 2491-7.
30. Opila, E.J., Fox, D.S. and Jacobson, N.S. (1997) Mass spectometric identification of Si-O-H(g) species from the reaction of silica with water vapor at atmospheric pressure. Journal of the American Ceramic Society, 804, 1009-12.
31. Opila, E.J. and Myers, D.L. (2004) Alumina volatility in water vapour at elevated temperatures. Journal of the American Ceramic Society, 899, 1701-5.
32. Yuri, I., Hisamatsu, T. and Rate, R. (2003) Prediction for ceramic materials in combustion gas flow, Proceedings of ASME TURBO EXPO 2002, 1-10, paper GT 2003-38886.
33. Lee, K.N. (2000) Current status of environmental barrier coatings for Si-based ceramics. Surface and Coating Technology, 133-134, 1-7.
34. Klemm, H., Frisch, M. and Schenk, B. (2004) Corrosion of ceramic materials in hot gas environment. Ceramic Engineering and Science Proceeding, 25, 463-8.
35. Lee, K.N. (2005) Recentprogress in the development of advanced environmental barrier coatings, 29th International Conference on Advanced Ceramics and Composites (ICACC), Daytona Beach, FLA, USA.
36. 7 phase in high-speed steam jet environment at high temperatures. Ceramics International, 32, 775-8.
37. 4 environmental barrier coating. Journal of Ceramic Processing and Research, 6, 81-4.
38. Ueno, S., Ohji, T. and Lin, H.T. (2007) Corrosion and recession behavior of zircon in water vapor environment at high temperature. Corrosion Science, 49, 1162-71.
39. Tröster, I., Samoilenkov, S.V., Wahl, G., Braue, W., Mechnich, P. and Schneider, H. (2005) Metal-organic chemical vapor deposition of environmental barrier coatings for all-oxide ceramic matrix composites. Ceramic Engineering and Science Proceeding, 26, 173-9.
40. Fritsch, M. and Klemm, H. (2006) Hot gas corrosion of oxide materials in the Al2O3-Y2O3 system and of YAG coated alumina in combustion environments, 30th International Conference on Advanced Ceramics and Composites (ICACC), Cocoa Beach, FL, USA.
41. Mechnich, P., Braue, W. and Schneider, H. (2004) Multifunctional reaction-bonded alumina coatings for porous continuous fiber-reinforced oxide composites. International Journal of Applied Ceramic Technology, 1, 343-50.
42. Mechnich, P. and Braue, W. (2005) Schutzschichtkonzepte für oxidkeramische Faserverbundwerkstoffe, CFI/Ber. Deutsche Keramische Gesellschaft, 82, 61-4.
43. Mechnich, P. and Kerkamm, I. (2007) Reaction-bonded zirconia environmental barrier boatings for all-oxide ceramic matrix composites, 31th International Conference on Advanced Ceramics and Composites (ICACC), Daytona Beach, FLA, USA.
44. Merrill, G.B., Morrison, J.A. and Temperature, H. (2000) Insulation for Ceramic Matrix Composites, US Patent 6,013,592.
45. Newman, B. and Schäfer, W. (2001) Processing and properties of oxide/oxide composites for industrial applications, in High temperature ceramic matrix composites (eds W. Krenkel, R. Naslain and H. Schneider), Wiley-VCH Verlag GmbH, Weinheim, pp. 600-9.
46. Szweda, A. (2004) Unique Hybrid Oxide/Oxide Ceramic Technology Successfully Demonstrated, Advanced Ceramics Report Autumn 2004, United States Advanced Ceramics Association.
47. Lane, J., Morrison, J., Mazzola, B. and Marini, S. (2007) Oxide-based CMCs for combustion turbines, 31th International Conference on Advanced Ceramics and Composites (ICACC), Daytona Beach, FLA, USA.
48. www.duotherm-stark.de (accessed 7.12.2007).
49. Pritzkow, W. (2005) Keramikblech, ein Werkstoff für höchste Ansprüche, cfi/Ber. Deutsche Keramische Gesellschaft, 82, 40-2.
50. www.keramikblech.com (accessed 7.12.2007).