Creep of Nextel™ 610 fiber at 1100°C in air and in steam

International Journal of Applied Ceramic Technology

Volumn 10, Issue 2, 2013, Pages 276-284

  Armani, Clinton J ^a   Ruggles Wrenn, Marina B ^a   Fair, Geoff E ^b   Hay, Randall S ^b  

^a AIR FORCE INSTITUTE OF TECHNOLOGY   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACCELERATED CREEPS; CONSTANT LOADING; CREEP LIFETIME; CREEP-RUPTURE; CREEP-RUPTURE DATA; FAILURE MECHANISM; FIBER TENSILE STRENGTHS; LINEAR ELASTIC; LOADING RATE; SUBCRITICAL CRACK GROWTH;

CRACKS; CREEP; FAILURE (MECHANICAL); FIBERS; STEAM; TENSILE STRENGTH;

LOADING;

EID: 84874789444     PISSN: 1546542X     EISSN: 17447402     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2012.02831.x     Document Type: Article

References (66)

1. A. Szweda, M. L. Millard, and, M. G. Harrison, Fiber Reinforced Ceramic Composite Member and Method for Making, U. S. Pat. No. 5 601-674 (1997).
2. S. M. Sim, and, R. J. Kerans, " Slurry infiltration and 3-D woven composites ", Ceram. Eng. Sci. Proc. 13 (9-10) 632-641 (1992).
3. F. W. Zok, " Developments in Oxide Fiber Composites," J. Am. Ceram. Soc., 89 3309-3324 (2006).
4. R. J. Kerans, R. S. Hay, T. A. Parthasarathy, and, M. K. Cinibulk, " Interface Design for Oxidation Resistant Ceramic Composites," J. Am. Ceram. Soc., 85 2599-2632 (2002).
5. B. Kanka, and, H. Schneider, " Aluminosilicate Fiber/Mullite Matrix Composites with Favorable High-Temperature Properties," J. Eur. Ceram. Soc., 20 619-623 (2000).
6. M. A. Mattoni, J. Y. Yang, C. G. Levi, F. W. Zok, and, L. P. Zawada, " Effects of Combustor Rig Exposure on a Porous-Matrix Oxide Composite," Int. J. Appl. Ceram. Technol., 2 133-140 (2005).
7. E. A. V. Carelli, H. Fujita, J. Y. Yang, and, F. W. Zok, " Effects of Thermal Aging on the Mechanical Properties of a Porous-Matrix Composite," J. Am. Ceram. Soc., 85 595-602 (2002).
8. K. A. Keller, T. Mah, T. A. Parthasarathy, E. E. Boakye, P. Mogilevsky, and, M. K. Cinibulk, " Effectiveness of Monazite Coatings in Oxide/Oxide Composites After Long Term Exposure at High Temperature," J. Am. Ceram. Soc., 86 325-332 (2003).
9. S. Hackemann, F. Flucht, and, W. Braue, " Creep Investigations of Alumina-Based All-Oxide Ceramic Matrix Composites," Composites A, 41 1768-1776 (2010).
10. L. P. Zawada, R. S. Hay, J. Staehler, and, S. S. Lee, " Characterization and High Temperature Mechanical Behavior of an Oxide/Oxide Composite," J. Am. Ceram. Soc., 86 981-990 (2003).
11. J. M. Mehrman, M. B. Ruggles-Wrenn, and, S. S. Baek, " Influence of Hold Times on the Elevated-Temperature Fatigue Behavior of an Oxide-Oxide Ceramic Composite in Air and in Steam," Compos. Sci. Technol., 67 1425-1438 (2007).
12. M. Ruggles-Wrenn, and, J. Braun, " Effects of Steam Environment on Creep Behavior of Nextel™ 720 Alumina Ceramic Composite at Elevated Temperature," Mater. Sci. Eng. A, 497 101-110 (2008).
13. M. B. Ruggles-Wrenn, and, C. L. Genelin, " Creep of Nextel™ 720/Alumina-Mullite Ceramic Composite at 1200C in Air, Argon, and Steam," Compos. Sci. Technol., 69 663-669 (2009).
14. M. B. Ruggles-Wrenn, P. Koutsoukos, and, S. S. Baek, " Effects of Environment on Creep Behavior of Two Oxide/Oxide Ceramic-Matrix Composites at 1200C," J. Mater. Sci., 43 6734-6746 (2008).
15. M. B. Ruggles-Wrenn, and, T. Kutsal, " Effects of Steam Environment on Creep Behavior of Nextel™ 720/Alumina-Mullite Ceramic Composite at Elevated Temperature," Composites A, 41 1807-1816 (2010).
16. M. B. Ruggles-Wrenn, and, M. Ozer, " Creep Behavior of Nextel™ 720/Alumina-Mullite Ceramic Composite with +/-45 Fiber Orientation at 1200C," Mater. Sci. Eng. A, 527 5326-5334 (2010).
17. M. B. Ruggles-Wrenn, and, P. D. Laffey, " Creep Behavior of Nextel™ 720/Alumina Ceramic Composite at Elevated Temperature in Air and in Steam," Compos. Sci. Technol., 68 2260-2266 (2008).
18. M. B. Ruggles-Wrenn, G. T. Siegert, and, S. S. Back, " Creep Behavior of Nextel™ 720/Alumina Ceramic Composite with +/-45 Fiber Orientation at 1200 C," Compos. Sci. Technol., 68 1588-1595 (2008).
19. M. B. Ruggles-Wrenn, and, N. R. Szymczak, " Effects of Steam Environment on Compressive Creep Behavior of Nextel™ 720/Alumina Ceramic Composite at 1200 C," Composites A, 39 1829-1837 (2008).
20. M. B. Ruggles-Wrenn, T. Yeleser, G. E. Fair, and, J. B. Davis, " Effects of Steam Environment on Creep Behavior of Nextel 610/Monazite/Alumina Composite at 1100 C," Appl. Comp. Mater., 16 379-392 (2009).
21. D. M. Wilson, D. C. Lunenburg, and, S. L. Lieder, " High Temperature Properties of Nextel 610 and Alumina-Based Nanocomposite Fibers," Ceram. Eng. Sci. Proc., 14 609-621 (1993).
22. D. M. Wilson, S. L. Lieder, and, D. C. Lunenburg, " Microstructure and High Temperature Properties of Nextel 720 Fibers," Ceram. Eng. Sci. Proc., 16 1005-1014 (1995).
23. D. M. Wilson, " Statistical Tensile Strength of Nextel 610 and Nextel 720 Fibres," J. Mater. Sci., 32 2535-2542 (1997).
24. D. M. Wilson, and, L. R. Visser, " High Performance Oxide Fibers for Metal and Ceramic Composites," Composites A, 32 1143-1153 (2001).
25. D. J. Pysher, and, R. E. Tressler, " Tensile Creep Rupture Behavior of Alumina-Based Polycrystalline Oxide Fibers," Ceram. Eng. Sci. Proc., 13 218-226 (1992).
26. D. J. Pysher, and, R. E. Tressler, " Creep Rupture Studies of Two Alumina-Based Ceramic Fibers," J. Mater. Sci., 27 423-428 (1992).
27. V. Lavaste, J. Besson, M.-H. Berger, and, A. R. Bunsell, " Elastic and Creep Properties of Alumina-Based Single Fibers," J. Am. Ceram. Soc., 78 3081-3087 (1995).
28. V. Lavaste, M. H. Berger, A. R. Bunsell, and, J. Besson, " Microstructure and Mechanical Characteristics of Alpha-Alumina-Based Fibres," J. Mater. Sci., 30 4215-4225 (1995).
29. J. C. Goldsby, H. M. Yun, G. N. Morscher, and, J. A. DiCarlo, " Annealing Effects on Creep of Polycrystalline Alumina-Based Fibers," Mater. Sci. Eng. A, 242 278-293 (1998).
30. V. H. Hammond, and, D. M. Elzey, " Comparing the Creep Response of Alumina Tows and Single Filaments," Scripta Mater., 46 287-291 (2002).
31. M. H. Berger, V. Lavaste, and, A. R. Bunsell, " Properties and Microstructure of Small-Diameter Alumina-Based Fibers;" Fine Ceramic Fibers, eds., A. R. Bunsell, and, M. H. Berger,. Marcel Dekker, New York, NY, 111-164, 1999.
32. A. R. Bunsell, and, M. H. Berger, " Fine Diameter Ceramic Fibres," J. Eur. Ceram. Soc., 20 2249-2260 (2000).
33. R. M. Morrell, " A Tensile Creep-Testing Apparatus for Ceramic Materials Using Simple Knife-Edge Universal Joints," J. Phys. E Sci. Instrum., 5 465-467 (1972).
34. F. A. Kandil, and, B. F. Dyson, " Tensile Creep of Ceramics: The Development of a Testing Facility," Int. J. High Technol. Ceram., 4 243-262 (1988).
35. J. A. DiCarlo, " Property Goals and Test Methods for High Temperature Ceramic Fibre Reinforcement," Ceram. Int., 23 283-289 (1997).
36. C. J. Armani, Creep Performance of Oxide Ceramic Fiber Materials at Elevated Temperature in Air and in Steam, Ph.D. Dissertation, Air Force Institute of Technology, Wright Patterson AFB, OH, 2011.
37. M. K. Cinibulk, J. R. Welch, and, R. S. Hay, " Preparation of Thin Sections of Coated Fibers for Characterization by Transmission Electron Microscopy," J. Am. Ceram. Soc., 79 2481-2484 (1996).
38. R. S. Hay, J. R. Welch, and, M. K. Cinibulk, " TEM Specimen Preparation and Characterization of Ceramic Coatings on Fiber Tows," Thin Solid Films, 308-309 389-392 (1997).
39. M. Schmücker, and, P. Mechnich, " Microstructural Coarsening of Nextel™ 610 Fibers Embedded in Alumina-Based Matrices," J. Am. Ceram. Soc., 91 1306-1308 (2008).
40. M. Schmücker, and, P. Mechnich, " Improving the Microstructural Stability of Nextel™ 610 Alumina Fibers Embedded in a Porous Alumina Matrix," J. Am. Ceram. Soc., 93 1888-1890 (2010).
41. M. B. Ruggles-Wrenn, A. T. Radzicki, S. S. Baek, and, K. A. Keller, " Effect of Loading Rate on the Monotonic Tensile Behavior and Tensile Strength of an Oxide-Oxide Ceramic Composite at 1200C," Mater. Sci. Eng. A, 492 88-94 (2008).
42. S. M. Wiederhorn, " Moisture Assisted Crack Growth in Ceramics," Int. J. Fracture Mech., 4 171-177 (1968).
43. S. M. Wiederhorn, " Stress Corrosion and Static Fatigue of Glass," J. Am. Ceram. Soc., 53 543-548 (1970).
44. S. M. Wiederhorn, " Subcritical Crack Growth in Ceramics," Fracture Mechanics of Ceramics, eds., R. C. Bradt, D. P. H. Hasselman, and, F. F. Lange,. Plenum Press, New York, NY, 623-646, 1974.
45. A. G. Evans, " Slow Crack Growth in Brittle Materials Under Dynamic Loading Conditions," Int. J. Fracture, 10 251-259 (1974).
46. A. C1368, Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature, American Society for Testing and Materials, West Conshohocken, PA, 2001.
47. A. C1465, Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures, American Society for Testing and Materials, West Conshohocken, PA, 2000.
48. S. R. Choi, and, J. P. Gyekenyesi, " Load-Rate Dependency of Ultimate Tensile Strength in Ceramic Matrix Composites at Elevated Temperatures," Int. J. Fatigue, 27 503-510 (2005).
49. S. R. Choi, N. P. Bansal, and, M. J. Verrilli, " Delayed Failure of Ceramic Matrix Composites in Tension at Elevated Temperatures," J. Eur. Ceram. Soc., 25 1629-1636 (2005).
50. C. Milz, J. Goering, and, H. Schneider, " Mechanical and Microstructural Properties of Nextel 720 Relating to its Suitability for High Temperatuer Applications in CMCs," Ceram. Eng. Sci. Proc. A, 20 191-198 (1999).
51. J. Goering, and, H. Schneider, " Creep and Subcritical Crack Growth of Nextel™ 720 Aluminosilicate Fibers as Received After Heat Treatment at 1300C," Ceram. Eng. Sci. Proc., 18 95-102 (1997).
52. D. M. Wilson, " New High Temperature Oxide Fibers;" High Temperature Ceramic Matrix Composites, eds., R. N. W. Krenkel, and, H. Schneider,. Wiley-VCH, Weinheim, Germany, 1, 2001.
53. W. R. Cannon, and, T. G. Langdon, " Review: Creep of Ceramics, Part I. Mechanical Characteristics," J. Mater. Sci., 18 1-50 (1983).
54. B. Evans, and, D. L. Kohlstedt, Rheology of Rocks, in Rock Physics and Phase Relations: A Handbook of Physical Constants, 148-165, AGU, Washington, DC, 1995.
55. A. K. Mukherjee, " An Examination of the Constitutive Equation for Elevated Temperature Plasticity," Mater. Sci. Eng., 322 1-22 (2002).
56. J.-P. Poirier, Creep of Crystals, Cambridge University Press, Cambridge, U.K., 1985.
57. J. E. Ritter, " Engineering Design and Fatigue Failure of Brittle Materials "; Fracture Mechanics of Ceramics, eds., R. C. Bradt, D. P. H. Hasselman, and, F. F. Lange,. Plenum Press, New York, NY, 661-686, 1978.
58. F. C. Monkman, and, N. J. Grant, " An Empirical Relationship Between Rupture Life and Minimum Creep Rate in Creep-Rupture Tests," ASTM Special Technical Publication No 56, 1956.
59. J. A. DiCarlo, and, H. M. Yun, " Fiber Test Development for Ceramic Composite Thermomechanical Properties;" Mechanical, Thermal, and Environmental Testing and Performance of Ceramic Composites and Components, eds., M. G. Jenkins, E. Lara-Curzio, and, S. T. Gonczy,. ASTM STP 1392, American Society for Testing and Materials, West Conshohocken, PA, 134-147, 2000.
60. J. A. DiCarlo, and, H. M. Yun, Factors Controlling Stress Rupture of Fiber-Reinforced Ceramic Composites, NASA, 20000012406, NASA Center for Aerospace Information, Hanover, MD, 1999.
61. J. A. DiCarlo, and, H. M. Yun, " Creep of Ceramic Fibers Mechanisms, Models, and Composite Implications;" Creep Deformation: Fundamentals and Applications, eds., R. S. Mishra, J. C. Earthman, and, S. V. Raj,. The Minerals, Metals, and Materials Society, Warrendale, PA, 195-208, 2002.
62. M. K. Ferber, and, M. G. Jenkins, " Evaluation of the Strength and Creep-Fatigue Behavior of Hot Isostatically Pressed Silicon Nitride," J. Am. Ceram. Soc., 75 2453-2462 (1992).
63. M. N. Menon, H. T. Fang, D. C. Wu, M. G. Jenkins, and, M. K. Ferber, " Creep and Stress Rupture Behavior of an Advanced Silicon Nitride: Part III, Stress Rupture and the Monkman-Grant Relationship," J. Am. Ceram. Soc., 77 1235-1241 (1994).
64. V. H. Hammond, Creep Rupture of an Oxide/Oxide Composite Fiber, Ph.D. Dissertation, University of Virginia, Charlottesville, VA, 2001.
65. M. B. Ruggles-Wrenn, S. S. Musil, S. Mall, and, K. A. Keller, " Creep Behavior of Nextel™ 610/Monazite/Alumina Composite at Elevated Temperatures," Compos. Sci. Technol., 66 2089-2099 (2006).
66. H. G. Halverson, and, W. A. Curtin, " Stress Rupture in Ceramic-Matrix Composites: Theory and Experiment," J. Am. Ceram. Soc., 85 1350-1365 (2002).