Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent

Journal of the European Ceramic Society

Volumn 34, Issue 5, 2014, Pages 1089-1096

  Wu, Jia Min ^a   Zhang, Xiao Yan ^a   Yang, Jin Long ^a  

^a TSINGHUA UNIVERSITY   (China)

Author keywords

Aqueous gelcasting; Flexural strength; Fracture toughness; Porous Si3N4 ceramics; Si3N4 poly hollow microspheres

Indexed keywords

AQUEOUS GEL-CASTING; BODY CONTACTS; PORE-FORMING AGENTS; POROUS SI;

BENDING STRENGTH; CERAMIC MATERIALS; FRACTURE TOUGHNESS; MECHANICAL PROPERTIES; POROSITY; POROUS SILICON; SHRINKAGE; SILICON;

BOROPHOSPHATE GLASS;

EID: 84892482878     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2013.11.025     Document Type: Article

References (36)

1. 4 foam ceramics with nest-like cell structure by particle-stabilized foams. J Am Ceram Soc 2012, 95:1229-1233.
2. 4 ceramics fabricated via partial sintering & starch addition. J Eur Ceram Soc 2013, 33:1507-1515.
3. 4 fabricated by phase separation method using benzoic acid as pore-forming agent. J Am Ceram Soc 2011, 94:1989-1991.
4. She J., Yang J.F., Beppu Y., Ohji T. Hertzian contact damage in a highly porous silicon nitride ceramic. J Eur Ceram Soc 2003, 23:1193-1197.
5. Cheng F., Clark S., Kelly S.M., Bradley J.S., Lefebvre F. Preparation of mesoporous silicon nitride via a nonaqueous sol-gel route. J Am Ceram Soc 2004, 87:1413-1417.
6. Yang J., Yang J.F., Shan S.Y., Gao J.Q., Ohji T. Effect of sintering additives on microstructure and mechanical properties of porous silicon nitride ceramics. J Am Ceram Soc 2006, 89:3843-3845.
7. Chen D., Zhang B., Zhuang H., Li W. Combustion synthesis of network silicon nitride porous ceramics. Ceram Int 2003, 29:363-364.
8. Shan S.Y., Yang J.F., Lu Y., Gao J.Q., Niihara K. Effects of carbon source on microstructural evolution and sintering behavior of porous silicon nitride ceramics. Scr Mater 2007, 56:193-196.
9. Ding S., Zeng Y.P., Jiang D. Oxidation bonding of porous silicon nitride ceramics with high strength and low dielectric constant. Mater Lett 2007, 61:2277-2280.
10. Yu J., Wang H., Zhang J., Zhang D., Yan Y. Gelcasting preparation of porous silicon nitride ceramics by adjusting the content of monomers. J Sol-Gel Sci Technol 2010, 53:515-523.
11. 4 as an additive. Ceram Int 2012, 38:4363-4367.
12. Zou C., Zhang C., Li B., Wang S., Cao F. Microstructure and properties of porous silicon nitride ceramics prepared by gel-casting and gas pressure sintering. Mater Des 2013, 44:114-118.
13. 4 ceramics based on particle-stabilized foams. J Porous Mater 2012, 19:883-888.
14. 4 ceramic foams. Mater Lett 2011, 65:1801-1804.
15. Fukasawa T., Deng Z.Y., Ando M., Ohji T., Kanzaki S. Synthesis of porous silicon nitride with unidirectionally aligned channels using freeze-drying process. J Am Ceram Soc 2002, 85:2151-2155.
16. Shigegaki Y., Brito M.E., Hirao K., Toriyama M., Kanzaki S. Strain tolerant porous silicon nitride. J Am Ceram Soc 1997, 80:495-498.
17. Yang J.F., Zhang G.J., Ohji T. Fabrication of low-shrinkage, porous silicon nitride ceramics by addition of a small amount of carbon. J Am Ceram Soc 2001, 84:1639-1641.
18. 4 pore-forming agent. J Am Ceram Soc 2007, 90:2379-2383.
19. Diaz A., Hampshire S. Characterisation of porous silicon nitride materials produced with starch. J Eur Ceram Soc 2004, 24:413-419.
20. Omatete O.O., Janney M.A., Strehlow R.A. Gelcasting-a new ceramic forming process. Am Ceram Soc Bull 1991, 70:1641-1649.
21. Duan X., Jia D., Yuan B., Wang S., Yang Z., Zhou Y. Effect of solid contents on the mechanical properties of SiC-10wt.% AlN ceramic composites prepared by gelcasting. J Alloys Compd 2013, 546:275-279.
22. Xie R., Zhang D., Zhang X., Zhou K., Button T.W. Gelcasting of alumina ceramics with improved green strength. Ceram Int 2012, 38:6923-6926.
23. Zhang C., Yang J., Qiu T., Guo J. Preparation of ZTA ceramic by aqueous gelcasting with a low-toxic monomer DMAA. Ceram Int 2012, 38:3063-3068.
24. 3-MgO ceramics prepared by non-aqueous gelcasting and dry pressing. Mater Res Bull 2011, 46:2217-2221.
25. 0.02O by a high-megnetic-field via gelcasting and its thermoelectric properties. J Ceram Soc Jpn 2006, 114:1085-1088.
26. 4-based ceramics. Ceram Int 2011, 37:481-486.
27. Zhou J., Wang C.A. Porous yttria-stabilized zirconia ceramics fabricated by nonaqueous-based gelcasting process with PMMA microsphere as pore-forming agent. J Am Ceram Soc 2013, 96:266-271.
28. Liu R., Wang C. Effects of mono-dispersed PMMA micro-balls as pore-forming agent on the properties of porous YSZ ceramics. J Eur Ceram Soc 2013, 33:1859-1865.
29. Zhang D., Qi L., Ma J., Cheng H. Synthesis of submicrometer-sized hollow silver spheres in mixed polymer-surfactant solutions. Adv Mater 2002, 14:1499-1502.
30. Wang L., Ebina Y., Takada K., Sasaki T. Ultrathin hollow nanoshells of manganese oxide. Chem Commun 2004, 1074-1075.
31. 3 precursors and applications in gas sensors and photocatalysis. Langmuir 2006, 22:9380-9385.
32. Zhu G., Qiu S., Terasaki O., Wei Y. Polystyrene bead-assisted self-assembly of microstructured silica hollow spheres in highly alkaline media. J Am Chem Soc 2001, 123:7723-7724.
33. Xu X., Asher S.A. Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals. J Am Chem Soc 2004, 126:7940-7945.
34. Schmidt H.T., Ostafin A.E. Liposome directed growth of calcium phosphate nanoshells. Adv Mater 2002, 14:532-535.
35. Augustin C., Hungerbach W. Production of hollow spheres (HS) and hollow sphere structures (HSS). Mater Lett 2009, 63:1109-1112.
36. Thijs I., Luyten J., Mullens S. Producing ceramic foams with hollow spheres. J Am Ceram Soc 2003, 87:170-172.