Mechanical and microwave dielectric properties of KD-I SiCf/SiC composites fabricated through precursor infiltration and pyrolysis

Ceramics International

Volumn 40, Issue 7 PART A, 2014, Pages 9009-9016

  Tian, Hao ^a   Liu, Hai Tao ^a   Cheng, Hai Feng ^a  

^a NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY   (China)

Author keywords

C. Dielectric properties; C. Mechanical properties; Precursor infiltration and pyrolysis

Indexed keywords

AUGER ELECTRON SPECTROSCOPY; COATINGS; DIELECTRIC PROPERTIES OF SOLIDS; FIBERS; MECHANICAL PROPERTIES; PHOTOELECTRONS; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY; X RAY PHOTOELECTRON SPECTROSCOPY;

DEFENSE TECHNOLOGIES; FIBER SURFACE; FIBER-REINFORCED; MECHANICAL AND DIELECTRIC PROPERTIES; MICROWAVE ABSORBING; MICROWAVE DIELECTRIC PROPERTIES; PRECURSOR INFILTRATION AND PYROLYSIS; STRENGTH AND TOUGHNESS;

SILICON CARBIDE;

EID: 84900497883     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2014.01.113     Document Type: Article

References (48)

1. V.M. Petrov, and V.V. Gagulin Microwave absorbing materials Inorg. Mater. 37 2 2001 93 98
2. F. Luo, D.M. Zhu, and W.C. Zhou A two-layer dielectric absorber covering a wide frequency range Ceram. Int. 33 2007 197 200
3. E.H. Ha, D.Q. Huang, and H.Y. Ding Application research and prospects of new and light mass radar absorbing materials J. Mater Eng. 3 2006 55 59
4. R.C. Che, L.M. Peng, X.F. Duan, Q. Chen, and X.L. Liang Microwave absorption enhancement and complex permittivity and permeability of Fe encapsulated within carbon nanotubes Adv. Mater. 16 5 2004 401 405
5. R. Naslain SiC-matrix composites: non brittle ceramics for thermostructural application Int. J. Appl. Ceram. Technol. 2 2005 75 84
6. R. Naslain Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview Compos. Sci. Technol. 64 2004 155 170
7. H.T. Liu, H. Tian, and H.F. Cheng Dielectric properties of SiC fiber-reinforced SiC matrix composites in the temperature range from 25 to 700 °C at frequencies between 8.2 and 18 GHz J. Nucl. Mater. 432 2013 57 60
8. J. Yuan, H.J. Yang, Z.L. Hou, W.L. Song, H. Xu, Y.Q. Kang, H.B. Jin, X.Y. Fang, and M.S. Cao Ni-decorated SiC powders: enhanced high-temperature dielectric properties and microwave absorption performance Powder Technol. 237 2012 309 313
9. H. Tian, H.T. Liu, H.F. Cheng, A high-temperature radar absorbing structure: design, fabrication and characterization, Compos. Sci. Technol. 90 (2014) 202-208.
10. f/SiC composites with engineered fiber-matrix interfaces Compos. Sci. Technol. 71 2011 699 704
11. C. Lacroix, D. Leguillon, and E. Martin The influence of an interphase on the deflection of a matrix crack in a ceramic-matrix composite Compos. Sci. Technol 62 4 2002 519 523
12. f/SiC composites with alternating PyC/SiC multilayer interphases Mater. Des. 44 2013 320 324
13. f/SiC composites with BN interphase prepared by dip-coating process J. Eur. Ceram. Soc. 32 2012 2505 2512
14. f/SiC composites fabricated by PIP process Ceram. Int. 36 2010 2033 2037
15. N. Igawa, T. Taguchi, R. Yamada, Y. Ishii, and S. Jitsukawa Preparation of silicon-based oxide layer on high-crystalline SiC fiber as an interphase in SiC/SiC composites J. Nucl. Mater. 329-333 2004 554 557
16. f/SiC composites with BN interphase prepared by ICVI J. Eur. Ceram. Soc 31 2011 1145 1153
17. 3 fiber woven fabrics Trans. Nonferr. Metal Soc. China 22 2012 354 359
18. J. Lamon Chemical vapor infiltrated SiC/SiC composites (CVI SiC/SiC) N.P. Bansal, Handbook of Ceramic Composites 2005 Kluwer 55 76
19. H.J. Yu, X.G. Zhou, H.L. Wang, S. Zhao, J.G. Yang, and Z.L. Huang Processing and properties of 2D SiC/SiC composites by precursor infiltration and pyrolysis J. Cent. South. Univ. Technol. 16 2009 190 194
20. X.B. He, and H. Yang Preparation of SiC fiber-reinforced SiC composites J. Mater. Process. Technol. 159 2005 135 138
21. C. Labrugkre, A. Guette, and R. Naslain Effect of ageing treatments at high temperatures on the microstructure and mechanical behaviour of 2D Nicalon/C/SiC composites. 1: Ageing under vacuum or argon J. Eur. Ceram. Soc. 17 1997 623 640
22. J.H. Miller, P.K. Liaw, and J.D. Landes Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon fabric-reinforced silicon-carbide matrix ceramic composites Mater. Sci. Eng. A 317 2001 49 58
23. M. Takeda, Y. Imai, Y. Kagawa, and S.Q. Guo High-temperature thermal stability of Hi-Nicalon™ SiC fiber/SiC matrix composites under long term cyclic heating Mater. Sci. Eng. A 286 2000 312 323
24. S. Guo, and Y. Kagawa Tensile fracture behavior of continuous SiC fiber-reinforced SiC matrix composites at elevated temperatures and correlation to in situ constituent properties J. Eur. Ceram. Soc 22 2002 2349 2356
25. T. Hinoki, W. Yang, T. Nozawa, T. Shibayama, and Y. Katoh Improvement of mechanical properties of SiC/SiC composites by various surface treatments of fibers J. Nucl. Mater. 289 2001 23 29
26. m composite Int. J. Impact Eng. 25 2001 29 40
27. Wen Yang, H. Araki, A. Kohyama, Q. Yang, and T. Noda Effects of heat treatment on the microstructure and flexural properties of CVI-Tyranno-SA/SiC composite Ceram Int. 33 2007 141 146
28. B. Riccardi, E. Trentini, M. Labanti, M. Leuchs, S. Roccella, and E. Visca Characterization of commercial grade Tyranno SA/CVI-SiC composites J. Nucl. Mater. 367-370 2007 672 676
29. W. Yang, T. Noda, H. Araki, J. Yu, and A. Kohyama Mechanical properties of several advanced Tyranno-SA fiber-reinforced CVI-SiC/SiC composites Mater. Sci. Eng. A 345 2003 28 35
30. N. Igawa, T. Taguchia, T. Nozaw, L.L. Snead, T. Hinoki, J.C. McLaughlin, Y. Katoh, S. Jitsukawa, and A. Kohyama Fabrication of SiC fiber reinforced SiC composite by chemical vapor infiltration for excellent mechanical properties J. Phys. Chem. Solids 66 2005 551 554
31. S. Yajima, K. Okamura, J. Hayashi., and M. Omori Synthesis of continuous SiC fibers with high tensile strength J. Am. Ceram. Soc. 59 1976 324 327
32. T.J. Hu, X.D. Li, G.Y. Li, D.Y. Wang, and J. Wang SiC fibers with controllable thickness of carbon layer prepared directly by preceramic polymer pyrolysis routes Mater. Sci. Eng. B 176 2011 706 710
33. D.Y. Wang, X.H. Mao, Y.C. Song, and Y.D. Wang SiC fiber with low electrical resistivity and oxygen content Sci. China Technol. Sci. 53 2010 1038 1044
34. D.Y. Wang, Y.C. Song, and Y.Q. Li Effect of composition and structure on specific resistivity of SiC fibers Trans. Nonferr. Metal Soc. China 22 2012 1133 1139
35. R. He, D. Jiang, and X. Li Determination of carbon and oxygen in silicon carbide fibers J. Chin Ceram. Soc. 31 4 2003 386 388
36. W. Gauthier, F. Pailler, J. Lamon, and R. Pailler Oxidation of silicon carbide fibers during static fatigue in air at intermediate temperatures J. Am. Ceram. Soc. 92 9 2009 2067 2073
37. C. Sauder, and J. Lamon Tensile creep behavior of SiC-based fibers with a low oxygen content J. Am. Ceram. Soc. 90 4 2007 1146 1156
38. K.A. Appiah, Z.L. Wang, and W.J. Lackey Characterization of interfaces in C fiber-renforced laminated C-SiC matrix composites Carbon 38 2000 831 838
39. P.B. Swain The analysis of carbon bonding environment in HWCVD deposited a-SiC:H films by XPS and Raman spectroscopy Surf. Coat. Technol. 201 2006 1589 1593
40. H.T. Liu, H.F. Cheng, J. Wang, R.C. Che, G.P. Tang, and Q.S. Ma Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites Mater. Lett. 63 2009 2029 2031
41. Y. Ma, S. Wang, and Z.H. Chen In situ growth of a carbon interphase between carbon fibres and a polycarbosilane-derived silicon carbide matrix Carbon 49 2011 2869 2877
42. G.B. Zheng, H. Sano, K. Suzuki, K. Kazuo, U. Yasuo, and H.M. Cheng A TEM study of microstructure of carbon fiber/polycarbosilane-derived SiC composites Carbon 37 1999 2057 2062
43. G. Boitier, S. Darzens, J.L. Chermant, and J. Vicens Microstructual investigation of interfaces in CMCs Compos. A 331 2002 1467 1470
44. W.L. Song, M.S. Cao, Z.L. Hou, X.Y. Fang, X.L. Shi, and J. Yuan High dielectric loss and its monotonic dependence of conducting-dominated multiwalled carbon nanotubes/silica nanocomposite on temperature ranging from 373 to 873 K in X-band Appl. Phys. Lett. 94 23 2009 233110
45. B. Zhang, J.B. Li, J.J. Sun, S.X. Zhang, H.Z. Zhai, and Z.W. Du Nanometer silicon carbide powder synthesis and its dielectric behavior in the GHz range J. Eur. Ceram. Soc. 22 2002 93 99
46. P. Delhaes, and F. Carmona Physical properties of noncrystalline carbons Chem. Phys. Carbon, N. Y. 1981
47. F. Carmona, P. Delhaes, G. Keryer, and J.P. Manceau Non-metal transition in a non-crystalline carbon Solid State Commun. 14 1974 1183 1187
48. 2 composites fabricated through a sol-gel process Powder Technol. 239 2013 374 380