Characterization of the State-of-the-art and Identification of Main Trends for Ecodesign Tools and Methods: Classifying Three Decades of Research and Implementation

Journal of the Indian Institute of Science

Volumn 95, Issue 4, 2015, Pages 405-427

  Pigosso, D C A ^a   McAloone, T C ^a   Rozenfeld, H ^b  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ECODESIGN; ENVIRONMENTAL MANAGEMENT; LIFE CYCLE; RAW MATERIALS;

BIBLIOMETRIC ANALYSIS; ECO-DESIGN TOOLS; ENVIRONMENTAL CONSIDERATIONS; ENVIRONMENTAL PERFORMANCE; PROACTIVE MANAGEMENT; RAW MATERIAL EXTRACTION; STATE OF THE ART; SYSTEMATIC LITERATURE REVIEW;

RESEARCH AND DEVELOPMENT MANAGEMENT;

EID: 84954171480     PISSN: 09704140     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (363)

1. Communities, C. of the E. Green paper on integrated product policy. Environment (Office for Official Publications of the European Communities, 2001).
2. H. Baumann, F. Boons and A. Bragd, Mapping the green product development field: engineering, policy and business perspectives, J. Clean. Prod. 10, 409-425 (2002).
3. G. Johansson, Success factors for integration of ecodesign in product development: a review of state of the art, Environ. Manag. Heal., 13, 98-107 (2002).
4. J. Van Weenen, Towards sustainable product development, J. Clean. Prodm., 3, 95-100 (1995).
5. S. Byggeth and E. Hochschorner, Handling trade-offs in ecodesign tools for sustainable product development and procurement, J. Clean. Prod., 14, 1420-1430 (2006).
6. M.D. Bovea and V. Pérez-Belis, A taxonomy of ecodesign tools for integrating environmental requirements into the product design process, J. Clean. Prod., 20, 61-71 (2012).
7. F. Vallet, et al., Using eco-design tools: an overview of experts' practices, Des. Stud., 34, 345-377 (2013).
8. D.C.A. Pigosso, T.C. McAloone and H. Rozenfeld, Systematization of best practices for ecodesign implementation, in International Design Conference-DESIGN 2014, 1651-1662 (2014).
9. Researching Operations Management, (Routledge, 2009).
10. P. Brereton, B. Kitchenham, D. Budgen, M. Turner and M. Khalil, Lessons from applying the systematic literature review process within the software engineering domain, J. Syst. Softw., 80, 571-583 (2007).
11. J. Biolchini, P.G. Mian, A.C.C. Natali and G.H. Travassos, Systematic Review in Software Engineering, (2005).
12. D. Maxwell and Vorst, R. Van Der, Developing sustainable products and services, J. Clean. Prod., 11, 883-895 (2003).
13. C. Luttropp and J. Lagerstedt, EcoDesign and the ten golden rules: generic advice for merging environmental aspects into product development, J. Clean. Prod., 14, 1396-1408 (2006).
14. C. Chen, Design for the environment: a quality-based model for green product development, Manage, Sci., 47, 250-263 (2001).
15. E. Manzini and C. Vezzoli, A strategic design approach to develop sustainable product service systems: examples taken from the 'environmentally friendly innovation' Italian prize, J. Clean. Prod., 11, 851-857 (2003).
16. A.J.D. Lambert, Linear programming in disassembly/clustering sequence generation, Comput. Ind. Eng., 36, 723-738 (1999).
17. T. Sakao and Y. Shimomura, Service Engineering: a novel engineering discipline for producers to increase value combining service and product, J. Clean. Prod., 15, 590-604 (2007).
18. E. Hertwich, W. Pease and C. Koshland, Evaluating the environmental impact of products and production processes: a comparison of six methods, Sci. Total Environ., 196, 13-29 (1997).
19. D. Pujari, Eco-innovation and new product development: Understanding the influences on market performance, TECHNOVATION, 26, 76-85 (2006).
20. C. Alves, et al., Ecodesign of automotive components making use of natural jute fiber composites, J. Clean. Prod., 18, 313-327 (2010).
21. G. Noci and R. Verganti, Managing 'green' product innovation in small firms, R D Manag., 29, 3-15 (1999).
22. S. Byggeth and E. Hochschorner, Handling trade-offs in ecodesign tools for sustainable product development and procurement, J. Clean. Prod., 14, 1420-1430 (2006).
23. P. Knight and J.O. Jenkins, Adopting and applying eco-design techniques: a practitioners perspective, J. Clean. Prod., 17, 549-558 (2009).
24. W.-P. Schmidt and F. Butt, Life cycle tools within Ford of Europe's Product Sustainability Index-Case study ford S-MAX & Ford Galaxy, Int. J. LIFE CYCLE Assess., 11, 315-322 (2006).
25. P.H. Nielsen and H. Wenzel, Integration of environmental aspects in product development: a stepwise procedure based on quantitative life cycle assessment, J. Clean. Prod., 10, 247-257 (2002).
26. P. Georgiadis and M. Besiou, Sustainability in electrical and electronic equipment closed-loop supply chains: a system dynamics approach, J. Clean. Prod., 16, 1665-1678 (2008).
27. R.M. Dangelico and D. Pujari, mainstreaming green product innovation: why and how companies integrate environmental sustainability, J. Bus. Ethics, 95, 471-486 (2010).
28. R. Sroufe, S. Curkovic, F. Montabon and S.A. Melnyk, The new product design process and design for environment: "Crossing the chasm", Int. J. Oper. Prod. Manag, 20, 267-291 (2000).
29. L. Holloway, Materials selection for optimal environmental impact in mechanical design, Mater. Des., 19, 133-143 (1998).
30. M. Hauschild and J. Jeswiet, design for environment-do we get the focus right? CIRP Ann., 1-4 (2004).
31. V. Lofthouse, Ecodesign tools for designers: defining the requirements, J. Clean. Prod., 14, 1386-1395 (2006).
32. J.C. Brezet and C. Van Hemel, Ecodesign: A Promising Approach to Sustainable Production and Consumption, (1997).
33. ISO. ISO 14040: Life cycle assessment-principles and framework, Environ. Manage, 3, 28 (2006).
34. R. Karlsson and C. Luttropp, EcoDesign: What's happening? an overview of the subject area of EcoDesign and of the papers in this special issue, J. Clean. Prod., 14, 1291-1298 (2006).
35. ISO 14040. Environmental management-life cycle assessment-principles and framework (revised in 2006), ISO 14040, (1997).
36. J. Fiksel, K. Cook, S. Roberts and D. Tsuda, Design for environment at Apple Computer:-Case study of the new PowerMacintosh 7200, Proc. 1996 IEEE Int. Symp. Electron. Environ. ISEE-1996, 218-223, doi:10.1109/ISEE.1996.501881.
37. Iso. ISO/TR 14062-Environmental management-Integrating environmental aspects into product design and development, Tech. Rep., 2002, (2002).
38. C.F. Eubanks and K. Ishii, AI methods for life-cycle serviceability design of mechanical systems, Artif. Intell. Eng., 8, 127-140 (1993).
39. T. Lamvik, K. Walsh and O. Myklebust, Manufacturing a green service: engaging the TRIZ model of innovation, IEEE Trans. Electron. Packag. Manuf., 24, 10-17 (2001).
40. D. Maxwell and R. van der Vorst, Developing sustainable products and services, J. Clean. Prod., 11, 883-895 (2003).
41. O. Mont, C. Dalhammar and N. Jacobsson, A new business model for baby prams based on leasing and product remanufacturing, J. Clean. Prod., 14, 1509-1518 (2006).
42. T.C. Kuo, Mass customization and personalization software development: a case study eco-design product service system, J. Intell. Manuf., 24, 1019-1031 (2013).
43. J.-C. Tu, Y.-C. Huang, C.-Y. Hsu and Y.-W. Cheng, analyzing lifestyle and consumption pattern of hire groups under product service systems in Taiwan, Math. Probl. Eng., (2013), doi:10.1155/2013/710981.
44. D. Chen, et al., PSS solution evaluation considering sustainability under hybrid uncertain environments, Expert Syst. Appl., 42, 5822-5838 (2015).
45. A.C. Thornton and A.L. Johnson, CADET: a software support tool for constraint processes in embodiment design, Res. Eng. Des. Appl. Concurr. Eng., 8, 1-13 (1996).
46. H.T. Chang and J.L. Chen, The conflict-problem-solving CAD software integrating TRIZ into eco-innovation, Adv. Eng. Softw., 35, 553-566 (2004).
47. S. Leibrecht, Fundamental principles for CAD-based Ecological Assessments (9 pp), Int. J. Life Cycle Assess., 10, 436-444 (2005).
48. J. Heintz, J.-P. Belaud, N. Pandya, M.T. Dos Santos and V. Gerbaud, Computer aided product design tool for sustainable product development, Comput. Chem. Eng., 71, 362-376 (2014).
49. R. Gaha, B. Yannou and A. Benamara, A new eco-design approach on CAD systems, Int. J. Precis. Eng. Manuf., 15, 1443-1451 (2014).
50. A framework for virtual disassembly analysis, J. Intell. Manuf., (1997).
51. A.J.D. Lambert, Linear programming in disassembly/clustering sequence generation, Comput. Ind. Eng., 36, 723-738 (1999).
52. K. Feldmann, O. Meedt, S. Trautner, H. Scheller and W. Hoffman, The "Green Design Advisor": A tool for design for environment, J. Electron. Manuf., 9, 17-28 (1999).
53. C.M. Rose and K. Ishii, Product end-of-life strategy categorization design tool, J. Electron. Manuf., 9, 41-51 (1999).
54. M.C. Zhou, R.J. Caudill and D. Sebastian, Multi-lifecycle product recovery for electronic products, J. Electron. Manuf., 9, 1-15 (1999).
55. L.H. Shu and W.C. Flowers, Application of a design-for-remanufacture framework to the selection of product life-cycle fastening and joining methods, Robot. Comput. Integr. Manuf., 15, 179-190 (1999).
56. T. Eichner and R. Pethig, Product design and efficient management of recycling and waste treatment, J. Environ. Econ. Manage., 41, 109-134 (2001).
57. C.M. Rose, A.B. Stevels and K. Ishii, Method for formulating product end-of-life strategies for electronics industry, J. Electron. Manuf., 11, 185-196 (2002).
58. C.M. Rose, K. Ishii and A. Stevels, Influencing design to improve product end-of-life stage, Res. Eng. Des. Appl. Concurr. Eng., 13, 83-93 (2002).
59. F. Ardente, G. Beccali and M. Cellura, Eco-sustainable energy and environmental strategies in design for recycling: the software "ENDLESS", Ecol. Modell., 163, 101-118 (2003).
60. X.M. Xu, et al., Modelling and solving of product disassembly activity logic network, Int. J. Adv. Manuf. Technol., 23, 220-226 (2004).
61. Y. Kondo and S. Nakamura, Evaluating alternative life-cycle strategies for electrical appliances by the waste input-output model, Int. J. LIFE CYCLE Assess., 9, 236-246 (2004).
62. L.H. Shih, Y.S. Chang and Y.T. Lin, Intelligent evaluation approach for electronic product recycling via case-based reasoning, Adv. Eng. INFORMATICS, 20, 137-145 (2006).
63. S. Nakamura and Y. Kondo, A waste input-output life-cycle cost analysis of the recycling of end-of-life electrical home appliances, Ecol. Econ., 57, 494-506 (2006).
64. P. Zwolinski, M.-A. Lopez-Ontiveros and D. Brissaud, Integrated design of remanufacturable products based on product profiles, J. Clean. Prod., 14, 1333-1345 (2006).
65. P. Ferrao and J. Amaral, Design for recycling in the automobile industry: new approaches and new tools, J. Eng. Des., 17, 447-462 (2006).
66. P.-J. Park, K. Tahara, I.-T. Jeong and K.-M. Lee, Comparison of four methods for integrating environmental and economic aspects in the end-of-life stage of a washing machine, Resour. Conserv. Recycl., 48, 71-85 (2006).
67. T.C. Kuo, Enhancing disassembly and recycling planning using life-cycle analysis, Robot. Comput. Integr. Manuf., 22, 420-428 (2006).
68. C. Mascle and H.P. Zhao, Integrating environmental consciousness in product/process development based on life-cycle thinking, Int. J. Prod. Econ., 112, 5-17 (2008).
69. F. Mathieux, D. Froelich and P. Moszkowicz, ReSICLED: A new recovery-conscious design method for complex products based on a multicriteria assessment of the recoverability, J. Clean. Prod., 16, 277-298 (2008).
70. J. Um, J. Yoon and S. Suh, An architecture design with data model for product recovery management systems, Resour. Conserv. Recycl., 52, 1175-1184 (2008).
71. C.-J. Chung and H.-M. Wee, Green-product-design value and information-technology investment on replenishment model with remanufacturing, Int. J. Comput. Integr. Manuf., 23, 466-485 (2010).
72. D.C.A. Pigosso, E.T. Zanette, A.G. Filho, A.R. Ometto and H. Rozenfeld, Ecodesign methods focused on remanufacturing, J. Clean. Prod., 18, 21-31 (2010).
73. G. Gaustad, E. Olivetti and R. Kirchain, Design for recycling, J. Ind. Ecol., 14, 286-308 (2010).
74. A. Santini, et al., Assessment of Ecodesign potential in reaching new recycling targets, Resour. Conserv. Recycl., 54, 1128-1134 (2010).
75. S.S. Smith and W. Chen, Advanced engineering informatics rule-based recursive selective disassembly sequence planning for green design, Adv. Eng. Informatics, 25, 77-87 (2011).
76. Y.-J. Tseng, F.-Y. Yu and F.-Y. Huang, A green assembly sequence planning model with a closed-loop assembly and disassembly sequence planning using a particle swarm optimization method, Int. J. Adv. Manuf. Technol., 57, 1183-1197 (2011).
77. Q. Yang, S. Yu and A. Sekhari, A modular eco-design method for life cycle engineering based on redesign risk control, Int. J. Adv. Manuf. Technol., 56, 1215-1233 (2011).
78. C.-J. Chung and H.-M. Wee, Short life-cycle deteriorating product remanufacturing in a green supply chain inventory control system, Int. J. Prod. Econ., 129, 195-203 (2011).
79. L. Candido, et al., The recycling cycle of materials as a design project tool, J. Clean. Prod., 19, 1438-1445 (2011).
80. S. Bernard, Remanufacturing, J. Environ. Econ. Manage., 62, 337-351 (2011).
81. M. Remery, C. Mascle and B. Agard, A new method for evaluating the best product end-of-life strategy during the early design phase, J. Eng. Des., 23, 419-441 (2012).
82. F. Rizzi, I. Bartolozzi, A. Borghini and M. Frey, Environmental management of end-of-life products: nine factors of sustainability in collaborative networks, Bus. Strateg. Environ., 22, 561-572 (2013).
83. E. Dostatni, J. Diakun, A. Hamrol and W. Mazur, Application of agent technology for recycling-oriented product assessment, Ind. Manag. DATA Syst., 113, 817-839 (2013).
84. S. Ibbotson, T. Dettmer, S. Kara and C. Herrmann, Eco-efficiency of disposable and reusable surgical instruments-A scissors case, Int. J. LIFE CYCLE Assess., 18, 1137-1148 (2013).
85. S. Mangla, J. Madaan and F.T.S. Chan, Analysis of flexible decision strategies for sustainability-focused green product recovery system, Int. J. Prod. Res., 51, 3428-3442 (2013).
86. N. Tchertchian, D. Millet and O. Pialot, Modifying module boundaries to design remanufacturable products: the modular grouping explorer tool, J. Eng. Des., 24, 546-574 (2013).
87. S.V. Nagalingam, S.S. Kuik and Y. Amer, Performance measurement of product returns with recovery for sustainable manufacturing, Robot. Comput. Integr. Manuf., 29, 473-483 (2013).
88. C. Achillas, et al., Depth of manual dismantling analysis: A cost-benefit approach, WASTE Manag., 33, 948-956 (2013).
89. P. Kiddee, R. Naidu and M.H. Wong, Electronic waste management approaches: an overview, WASTE Manag., 33, 1237-1250 (2013).
90. H.M. Lee, W.F. Lu and B. Song, A framework for assessing product end-of-life performance: reviewing the state of the art and proposing an innovative approach using an end-of-life index, J. Clean. Prod., 66, 355-371 (2014).
91. Q. Yang, S. Yu and D. Jiang, A modular method of developing an eco-product family considering the reusability and recyclability of customer products, J. Clean. Prod., 64, 254-265 (2014).
92. E. Dace, G. Bazbauers, A. Berzina and P.I. Davidsen, System dynamics model for analyzing effects of eco-design policy on packaging waste management system, Resour. Conserv. Recycl., 87, 175-190 (2014).
93. M. Kwak and H. Kim, Design for life-cycle profit with simultaneous consideration of initial manufacturing and end-of-life remanufacturing, Eng. Optim., 47, 18-35 (2015).
94. G.A. Keoleian and G.M. Lewis, Application of life-cycle energy analysis to photovoltaic module design, Prog. Photovoltaics Res. Appl., 5, 287-300 (1997).
95. Environment, T. Evaluating the environmental impact of products and production processes: A comparison of six methods, 96-97, (1997).
96. J.A. Fava, Life cycle perspectives to achieve business benefits: From concept to technique. Hum. Ecol. RISK Assess. 4, 1003-1017 (1998).
97. K.G. Mueller, A.W. Court and C.B. Besant, Energy life cycle design: a method, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf, 213, 415-419 (1999).
98. C. Vezzoli, F. Ceschin, J.C. Diehl and C. Kohtala, Why have 'Sustainable Product-Service Systems' not been widely implemented?, J. Clean. Prod., 35, 288-290 (2012).
99. B.C. Lippiatt and A.S. Boyles, Using BEES to select cost-effective green products, Int. J. LIFE CYCLE Assess., 6, 76-80 (2001).
100. D.Q. Xiao, H.T. Wang, J.G. Zhu and S.Q. Peng, Sequent and accumulative life cycle assessment of materials and products, Mater. Des., 22, 147-149 (2001).
101. G. Fleischer, K. Gerner, H. Kunst, K. Lichtenvort and G. Rebitzer, A semi-quantitative method for the impact assessment of emissions within a simplified life cycle assessment, Int. J. Life Cycle Assess., 6, 149-156 (2001).
102. S.W. Lye, S.G. Lee and M.K. Khoo, ECoDE-An environmental component design evaluation tool, Eng. Comput, 18, 14-23 (2002).
103. G.S. Bhander, M. Hauschild and T. McAloone, Implementing life cycle assessment in product development, Environ. Prog., 22, 255-267 (2003).
104. W. Klopffer, Life-cycle based methods for sustainable product development, Int. J. LIFE CYCLE Assess., 8, 157-159 (2003).
105. J. Lagerstedt, C. Luttropp and L.-G. Lindfors, Functional Priorities in LCA and Design for Environment, Int. J. Life Cycle Assess., 8, 160-166 (2003).
106. N. Krishnan, S. Raoux and D. Dornfeld, Quantifying the environmental footprint of semiconductor equipment using the environmental value systems analysis (EnV-S), IEEE Trans. Semicond. Manuf, 17, 554-561 (2004).
107. M.D. Bovea and R. Vidal, Increasing product value by integrating environmental impact, costs and customer valuation, Resour. Conserv. Recycl, 41, 133-145 (2004).
108. L. Stromberg, Integrated life-cycle design of coatings on exterior wood Part 2: Life-cycle assessment, Surf. COATINGS Int. PART B-COATINGS Trans, 87, 211-220 (2004).
109. T. Hur, J. Lee, H. Ryu and E. Kwon, Simplified LCA and matrix methods in identifying the environmental aspects of a product system, J. Environ. Manage, 75, 229-237 (2005).
110. Y. Kobayashi, H. Kobayashi, A. Hongu and K. Sanehira, A Practical Method for Quantifying Eco-efficiency Using Eco-design Support Tools, J. Ind. Ecol., 9, 131-144 (2005).
111. M. Finkbeiner, R. Hoffmann, K. Ruhland, D. Liebhart and B. Stark, Application of life cycle assessment for the environmental certificate of the Mercedes-Benz S-Class, Int. J. LIFE CYCLE Assess., 11, 240-246 (2006).
112. I. Munoz, J. Rieradevall, X. Domenech and C. Gazulla, Using LCA to assess eco-design in the automotive sector-Case study of a polyolefinic door panel, Int. J. LIFE CYCLE Assess., 11, 323-334 (2006).
113. P.-J. Park, K.-M. Lee and W. Wimmer, Development of an environmental assessment method for consumer electronics by combining top-down and bottom-up approaches, Int. J. LIFE CYCLE Assess., 11, 254-264 (2006).
114. M. Rossi, S. Charon, G. Wing and J. Ewell, Design for the next generation incorporating cradle-to-cradle design into Herman Miller products, J. Ind. Ecol., 10, 193-210 (2006).
115. Q. Yu, H. Zhixian and Y. Zhiguo, Integrated assessment of environmental and economic performance of chemical products using analytic hierarchy process approach, CHINESE J. Chem. Eng., 15, 81-87 (2007).
116. J.C. Alonso, et al., Electrical and electronic components in the automotive sector: Economic and environmental assessment, Int. J. LIFE CYCLE Assess., 12, 328-335 (2007).
117. K. Verghese and D. Hes, Qualitative and quantitative tool development to support environmentally responsible decisions, J. Clean. Prod., 15, 814-818 (2007).
118. Y. Jianjun, J. Baiyang, G. Yifeng, D. Jinxiang and L. Chenggang, Research on evaluation methodologies of product life cycle engineering design (LCED) and development of its tools, Int. J. Comput. Integr. Manuf, 21, 923-942 (2008).
119. C. Koffler, S. Krinke, L. Schebek and J. Buchgeister, Volkswagen slimLCl: A procedure for streamlined inventory modelling within life cycle assessment of vehicles, Int. J. Veh. Des., 46, 172-188 (2008).
120. W.K.C. Yung, H.K. Chan, A.C.K. Choi, T.M. Yue and M.I. Mazhar, An environmental assessment framework with respect to the Requirements of Energy-using Products Directive, Proc. Inst. Mech. Eng. PART B-JOURNAL Eng. Manuf, 222, 643-651 (2008).
121. E. Benetto, M. Becker and J. Welfring, life cycle assessment of Oriented Strand Boards (OSB): from process innovation to ecodesign, Environ. Sci. Technol, 43, 6003-6009 (2009).
122. W.K.C. Yung, et al., Life cycle assessment of two personal electronic products-A note with respect to the energy-using product directive, Int. J. Adv. Manuf. Technol, 42, 415-419 (2009).
123. J.-H. Eun, J.-H. Son, J.-M. Moon and J.-S. Chung, Integration of life cycle assessment in the environmental information system, Int. J. LIFE CYCLE Assess., 14, 364-373 (2009).
124. I. Munoz, C. Gazulla, A. Bala, R. Puig and P. Fullana, LCA and ecodesign in the toy industry: Case study of a teddy bear incorporating electric and electronic components, Int. J. LIFE CYCLE Assess., 14, 64-72 (2009).
125. C. Koffler and K. Rohde-Brandenburger, On the calculation of fuel savings through lightweight design in automotive life cycle assessments, Int. J. LIFE CYCLE Assess., 15, 128-135 (2010).
126. C.M.V.B. Almeida, A.J.M. Rodrigues, S.H. Bonilla and B.F. Giannetti, Emergy as a tool for Ecodesign: Evaluating materials selection for beverage packages in Brazil, J. Clean. Prod., 18, 32-43 (2010).
127. S. Vinodh and G. Rathod, Integration of ECQFD and LCA for sustainable product design, J. Clean. Prod., 18, 833-842 (2010).
128. S. Kota and A. Chakrabarti, A method for estimating the degree of uncertainty with respect to life cycle assessment during design, J. Mech. Des., 132, (2010).
129. B. De Benedetti, D. Toso, G.L. Baldo and S. Rollino, EcoAudit: A renewed simplified procedure to facilitate the environmentally informed material choice orienting the further life cycle analysis for ecodesigners, Mater. Trans., 51, 832-837 (2010).
130. M. Princaud, A. Cornier and D. Froelich, Developing a tool for environmental impact assessment and eco-design for ships, Proc. Inst. Mech. Eng. PART M-JOURNAL Eng. Marit. Environ, 224, 207-224 (2010).
131. H. Ostad-Ahmad-Ghorabi and D. Collado-Ruiz, Tool for the environmental assessment of cranes based on parameterization, Int. J. LIFE CYCLE Assess., 16, 392-400 (2011).
132. E. Gasafi and M. Weil, Approach and application of life cycle screening in early phases of process design: case study of supercritical water gasification, J. Clean. Prod., 19, 1590-1600 (2011).
133. K. Nakano and M. Hirao, Collaborative activity with business partners for improvement of product environmental performance using LCA, J. Clean. Prod., 19, 1189-1197 (2011).
134. W.K.C. Yung, et al., A life-cycle assessment for eco-redesign of a consumer electronic product, J. Eng. Des., 22, 69-85 (2011).
135. M. Herva, A. Alvarez and E. Roca, Sustainable and safe design of footwear integrating ecological footprint and risk criteria, J. Hazard. Mater., 192, 1876-1881 (2011).
136. K.S. Whitefoot, et al., Consequential life cycle assessment with market-driven design development and demonstration, J. Ind. Ecol., 15, 726-742 (2011).
137. A.J.C. Trappey, J.J.R. Ou, G.Y.P. Lin and M.Y. Chen, An eco-And inno-product design system applying integrated and intelligent qfde and triz methodology, J. Syst. Sci. Syst. Eng., 20, 443-459 (2011).
138. A.T. Mayyas, A. Qattawi, A.R. Mayyas and M.A. Omar, Life cycle assessment-based selection for a sustainable lightweight body-in-white design, ENERGY, 39, 412-425 (2012).
139. C. Chen, J. Zhu, J.Y. Yu and H. Noori, A new methodology for evaluating sustainable product design performance with two-stage network data envelopment analysis, Eur. J. Oper. Res., 221, 348-359 (2012).
140. M. Herva, A. Franco-Uria, E.F. Carrasco and E. Roc, Application of fuzzy logic for the integration of environmental criteria in ecodesign, Expert Syst. Appl., 39, 4427-4431 (2012).
141. C.J. Yang and J.L. Chen, Forecasting the design of eco-products by integrating TRIZ evolution patterns with CBR and Simple LCA methods, Expert Syst. Appl., 39, 2884-2892 (2012).
142. M. Torrent, E. Martinez and P. Andrada, Assessing the environmental impact of induction motors using manufacturer's data and life cycle analysis, IET Electr. POWER Appl., 6, 473-483 (2012).
143. C. Askham, et al., Strategy tool trial for office furniture, Int. J. LIFE CYCLE Assess., 17, 666-677 (2012).
144. M. Torrent, E. Martinez and P. Andrada, Life cycle analysis on the design of induction motors, Int. J. LIFE CYCLE Assess., 17, 1-8 (2012).
145. J. Bonvoisin, A. Lelah, F. Mathieux and D. Brissaud, An environmental assessment method for wireless sensor networks, J. Clean. Prod., 33, 145-154 (2012).
146. V. Poudelet, J.A. Chayer, M. Margni, R. Pellerin and R. Samson, A process-based approach to operationalize life cycle assessment through the development of an eco-design decision-support system, J. Clean. Prod., 33, 192-201 (2012).
147. X.F. Zhang, et al., Identification of connection units with high GHG emissions for low-carbon product structure design, J. Clean. Prod., 27, 118-125 (2012).
148. D. Millet, P.A. Yvars and P. Tonnelier, A method for identifying the worst recycling case: Application on a range of vehicles in the automotive sector, Resour. Conserv. Recycl, 68, 1-13 (2012).
149. N.M.P. Bocken, J.M. Allwood, A.R. Willey and J.M.H. King, Development of a tool for rapidly assessing the implementation difficulty and emissions benefits of innovations, Technovation, 32, 19-31 (2012).
150. M. Ristimaki, A. Saynajoki, J. Heinonen and S. Junnila, Combining life cycle costing and life cycle assessment for an analysis of a new residential district energy system design, ENERGY, 63, 168-179 (2013).
151. H.K. Chan, X. Wang, G.R.T. White and N. Yip, An extended fuzzy-Ahp approach for the evaluation of green product designs, IEEE Trans. Eng. Manag, 60, 327-339 (2013).
152. C.W. Lam, et al., Integrating toxicity reduction strategies for materials and components into product design: A case study on utility meters, Integr. Environ. Assess. Manag, 9, 319-328 (2013).
153. D. Maga, M. Hiebel and C. Knermann, Comparison of two ICT solutions: Desktop PC versus thin client computing, Int. J. LIFE CYCLE Assess., 18, 861-871 (2013).
154. Y. Mery, L. Tiruta-Barna, E. Benetto and I. Baudin, An integrated "process modelling-life cycle assessment'' tool for the assessment and design of water treatment processes, Int. J. LIFE CYCLE Assess., 18, 1062-1070 (2013).
155. N. Mirabella, V. Castellani and S. Sala, Life cycle assessment of bio-based products: A disposable diaper case study, Int. J. LIFE CYCLE Assess., 18, 1036-1047 (2013).
156. T. Zimmermann, Parameterized tool for site specific LCAs of wind energy converters, Int. J. LIFE CYCLE Assess., 18, 49-60 (2013).
157. A. Mestre and J. Vogtlander, Eco-efficient value creation of cork products: an LCA-based method for design intervention, J. Clean. Prod., 57, 101-114 (2013).
158. N. Tchertchian, P.-A. Yvars and D. Millet, Benefits and limits of a Constraint Satisfaction Problem/Life Cycle Assessment approach for the ecodesign of complex systems: a case applied to a hybrid passenger ferry, J. Clean. Prod., 42, 1-18 (2013).
159. H. Andriankaja, G. Bertoluci and D. Millet, Development and integration of a simplified environmental assessment tool based on an environmental categorisation per range of products, J. Eng. Des., 24, 1-24 (2013).
160. D. Collado-Ruiz and H. Ostad-Ahmad-Ghorabi, Estimating environmental behavior without performing a life cycle assessment, J. Ind. Ecol. 17, 31-42 (2013).
161. X.L. Zhao, W. Li and J. Stanbrook, A framework for the integration of performance based design and life cycle assessment to design sustainable structures, Adv. Struct. Eng., 17, 461-470 (2014).
162. H.K. Chan, X. Wang and A. Raffoni, An integrated approach for green design: Life-cycle, fuzzy AHP and environmental management accounting, Br. Account. Rev., 46, 344-360 (2014).
163. S.-J. Kim and S. Kara, Predicting the total environmental impact of product technologies, CIRP Ann. Technol, 63, 25-28 (2014).
164. F. Toyasaki, P. Daniele and T. Wakolbinger, A variational inequality formulation of equilibrium models for end-of-life products with nonlinear constraints, Eur. J. Oper. Res., 236, 340-350 (2014).
165. X. Wang, H.K. Chan and D. Li, A case study of an integrated fuzzy methodology for green product development, Eur. J. Oper. Res., 241, 212-223 (2014).
166. F. Ardente and F. Mathieux, Identification and assessment of product's measures to improve resource efficiency: the case-study of an Energy using Product, J. Clean. Prod., 83, 126-141 (2014).
167. F. Ardente and F. Mathieux, Environmental assessment of the durability of energy-using products: Method and application, J. Clean. Prod., 74, 62-73 (2014).
168. J. Bonvoisin, A. Lelah, F. Mathieux and D. Brissaud, An integrated method for environmental assessment and ecodesign of ICT-based optimization services, J. Clean. Prod., 68, 144-154 (2014).
169. S.J. Clune and S. Lockrey, Developing environmental sustainability strategies, the Double Diamond method of LCA and design thinking: A case study from aged care, J. Clean. Prod. 85, 67-82 (2014).
170. S.J. Kim, S. Kara and B. Kayis, Economic and environmental assessment of product life cycle design: volume and technology perspective, J. Clean. Prod., 75, 75-85 (2014).
171. A. Le Duigou and C. Baley, Coupled micromechanical analysis and life cycle assessment as an integrated tool for natural fibre composites development, J. Clean. Prod., 83, 61-69 (2014).
172. J.R. Perez-Gallardo, C. Azzaro-Pantel, S. Astier, S. Domenech and A. Aguilar-Lasserre, Ecodesign of photovoltaic grid-connected systems, Renew. ENERGY, 64, 82-97 (2014).
173. A. Jullien, M. Dauvergne and C. Proust, Road LCA: The dedicated ECORCE tool and database, Int. J. LIFE CYCLE Assess., 20, 655-670 (2015).
174. Q. Meng, et al., A rapid life cycle assessment method based on green features in supporting conceptual design, Int. J. Precis. Eng. Manuf. Technol, 2, 189-196 (2015).
175. D.R. Iritani, D.A.L. Silva, Y.M.B. Saavedra, P.F.F. Grael and A.R. Ometto, Sustainable strategies analysis through Life Cycle Assessment: A case study in a furniture industry, J. Clean. Prod., 96, 308-318 (2015).
176. L.H.U. Materials selection for optimal environmental impact in mechanical design, (1998).
177. M.D. Bovea and R. Vidal, Materials selection for sustainable product design: A case study of wood based furniture eco-design, Mater. Des., 25, 111-116 (2004).
178. F. Giudice, G. La Rosa and A. Risitano, Materials selection in the Life-Cycle Design process: A method to integrate mechanical and environmental performances in optimal choice, Mater. Des., 26, 9-20 (2005).
179. H. Huang, Z. Liu, L. Zhang and J.W. Sutherland, Materials selection for environmentally conscious design via a proposed life cycle environmental performance index, Int. J. Adv. Manuf. Technol, 44, 1073-1082 (2009).
180. J. Kim, Y. Hwang and K. Park, An assessment of the recycling potential of materials based on environmental and economic factors: Case study in South Korea, J. Clean. Prod., 17, 1264-1271 (2009).
181. L. Perez-Redondas, J. Asensio-Lozano and M. Angeles Garcia, An environmentally-friendly materials selection method: a proposal aimed at first-And second-cycle engineering students, J. Mater. Educ., 32, 139-152 (2010).
182. H. Huang, L. Zhang, Z. Liu and J.W. Sutherland, Multi-criteria decision making and uncertainty analysis for materials selection in environmentally conscious design, Int. J. Adv. Manuf. Technol, 52, 421-432 (2011).
183. C. Allione, C. De Giorgi, B. Lerma and L. Petruccelli, From ecodesign products guidelines to materials guidelines for a sustainable product. Qualitative and quantitative multicriteria environmental profile of a material, Energy, 39, 90-99 (2012).
184. J. Asensio-Lozano, L. Perez-Redondas, M. Angeles Garcia-Garcia and J.F. Alvarez-Antolin, A materials selection and design procedure for selection of automobile vehicles that are environmentally friendly in terms of available energy resources, J. Mater. Educ., 34, 1-19 (2012).
185. L. Qiu, L. Sun, X. Liu and S. Zhang, Material selection combined with optimal structural design for mechanical parts, J. Zhejiang Univ. A, 14, 383-392 (2013).
186. M.R. Mansor, S.M. Sapuan, E.S. Zainudin, A.A. Nuraini and A. Hambali, Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design, Mater. Des., 51, 484-492 (2013).
187. P. Pecas, I. Ribeiro, A. Silva and E. Henriques, Comprehensive approach for informed life cycle-based materials selection, Mater. Des., 43, 220-232 (2013).
188. I. Ribeiro, P. Pecas and E. Henriques, A life cycle framework to support materials selection for Ecodesign: A case study on biodegradable polymers, Mater. Des., 51, 300-308 (2013).
189. S. Prendeville, F. O'Connor and L. Palmer, Material selection for eco-innovation: SPICE model, J. Clean. Prod., 85, 31-40 (2014).
190. H.-T. Chang and C.-H. Lu, Simultaneous evaluations of material toxicity and ease of disassembly during electronics design integrating environmental assessments with commercial computer-Aided design software, J. Ind. Ecol., 18, 478-490 (2014).
191. S. Siddhaye and P. Sheng, Integration of environmental factors in pre-layout design optimization for printed circuit boards, J. Electron. Manuf, 8, 1-14 (1998).
192. G.C.C. Yang, CMP wastewater management using the concepts of design for environment, Environ. Prog., 21, 57-62 (2002).
193. H.-Z. Huang, Y.-K. Gu and Z.-G. Tian, Integrated product and process development model supporting life cycle, Int. J. Ind. Eng. Appl. Pract., 13, 270-279 (2006).
194. N. Hopkinson, Y. Gao and D.J. McAfee, Design for environment analyses applied to rapid manufacturing, Proc. Inst. Mech. Eng. PART D-JOURNAL Automob. Eng., 220, 1363-1372 (2006).
195. A. Helland, Dealing with uncertainty and pursuing superior technology options in risk management-The inherency risk analysis, J. Hazard. Mater., 164, 995-1003 (2009).
196. S. Vinodh, Improvement of agility and sustainability: A case study in an Indian rotary switches manufacturing organisation, J. Clean. Prod., 18, 1015-1020 (2010).
197. M.D.K.L. Wood, F. Mathieux, D. Brissaud and D. Evrard, Results of the first adapted design for sustainability project in a South Pacific small Island developing state: Fiji, J. Clean. Prod., 18, 1775-1786 (2010).
198. T. Short, A. Lee-Mortimer, C. Luttropp and G. Johansson, Manufacturing, sustainability, ecodesign and risk: Lessons learned from a study of Swedish and English companies, J. Clean. Prod., 37, 342-352 (2012).
199. J. Bonvoisin, S. Thiede, D. Brissaud and C. Herrmann, An implemented framework to estimate manufacturing-related energy consumption in product design, Int. J. Comput. Integr. Manuf, 26, 866-880 (2013).
200. M. Mani, B. Johansson, K.W. Lyons, R.D. Sriram and G. Ameta, Simulation and analysis for sustainable product development, Int. J. LIFE CYCLE Assess., 18, 1129-1136 (2013).
201. H.S. Park and T.T. Nguyen, Optimization of roll forming process with evolutionary algorithm for green product, Int. J. Precis. Eng. Manuf, 14, 2127-2135 (2013).
202. M. Strano, M. Monno and A. Rossi, Optimized design of press frames with respect to energy efficiency, J. Clean. Prod., 41, 140-149 (2013).
203. F. Pacelli, F. Ostuzzi and M. Levi, Reducing and reusing industrial scraps: A proposed method for industrial designers, J. Clean. Prod., 86, 78-87 (2015).
204. M.A. Hersh, A systems approach to green design, with illustrations from the computer industry, Syst. Res. Behav. Sci., 15, 497-510 (1998).
205. A.J.C. Trappey, C.V. Trappey, C.-T. Hsiao, J.J.R. Ou and C.-T. Chang, System dynamics modelling of product carbon footprint life cycles for collaborative green supply chains, Int. J. Comput. Integr. Manuf., 25, 934-945 (2012).
206. P. Yan, M. Zhou and D. Sebastian, An integrated product and process development methodology: Concept formulation, Robot. Comput. Integr. Manuf, 15, 201-210 (1999).
207. L. Cedola and G. Di Stasio, Development and application to a real scenario of a design for environment methodology for power plants, J. ENERGY Resour. Technol, ASME 123, 297-303 (2001).
208. M.Z. Hauschild, J. Jeswiet and L. Alting, Design for environment-Do we get the focus right? CIRP Ann. Technol, 53, 1-4 (2004).
209. H. Kobayashi, Strategic evolution of eco-products: A product life cycle planning methodology, Res. Eng. Des., 16, 1-16 (2005).
210. H. Kobayashi, A systematic approach to eco-innovative product design based on life cycle planning, Adv. Eng. Informatics, 20, 113-125 (2006).
211. G. Howarth and M.A. Hadfield, Sustainable product design model, Mater. Des., 27, 1128-1133 (2006).
212. Q.L. Xu, S.K. Ong and A.Y.C. Nee, Evaluation of product performance in product family design re-use, Int. J. Prod. Res., 45, 4119-4141 (2007).
213. K. Kernstine, B. Boling, L. Bortner, E. Hendricks and D. Mavris, Designing for a green future: a unified aircraft design methodology, J. Aircr., 47, 1789-1797 (2010).
214. J.H. Spangenberg, A. Fuad-Luke and K. Blincoe, Design for Sustainability (DfS): the interface of sustainable production and consumption, J. Clean. Prod., 18, 1485-1493 (2010).
215. B. Lu, J. Zhang, D. Xue and P. Gu, Systematic lifecycle design for sustainable product development, Concurr. Eng. Appl., 19, 307-323 (2011).
216. D. Abbes, A. Martinez and G. Champenois, Eco-design optimisation of an autonomous hybrid wind-photovoltaic system with battery storage, IET Renew. POWER Gener, 6, 358-371 (2012).
217. P.H. Driessen, B. Hillebrand, R.A.W. Kok and T.M.M. Verhallen, Green new product development: the pivotal role of product greenness, IEEE Trans. Eng. Manag, 60, 315-326 (2013).
218. P. Deutz, M. McGuire and G. Neighbour, Eco-design practice in the context of a structured design process: An interdisciplinary empirical study of UK manufacturers, J. Clean. Prod., 39, 117-128 (2013).
219. C. Achillas, D. Aidonis, C. Vlachokostas, D. Folinas and N. Moussiopoulos, Re-designing industrial products on a multi-objective basis: A case study, J. Oper. Res. Soc., 64, 1336-1346 (2013).
220. S.J. Kim, S. Kara and B. Kayis, Analysis of the impact of technology changes on the economic and environmental influence of product life-cycle design, Int. J. Comput. Integr. Manuf, 27, 422-433 (2014).
221. C. Gauthier and C. Genet, Nanotechnologies and green knowledge creation: paradox or enhancer of sustainable solutions? J. Bus. ETHICS, 124, 571-583 (2014).
222. J.-R. Chou, An ARIZ-based life cycle engineering model for eco-design, J. Clean. Prod., 66, 210-223 (2014).
223. R. Carlson, M. Erixon, P. Forsberg and A.C. Palsson, System for integrated business environmental information management, Adv. Environ. Res., 5, 369-375 (2001).
224. R. Houe and B. Grabot, Knowledge modeling for eco-design, Concurr. Eng. Appl., 15, 7-20 (2007).
225. X. Yang, P.R. Moore, C.-B. Wong, J.-S. Pu and S.K. Chong, Product lifecycle information acquisition and management for consumer products, Ind. Manag. DATA Syst., 107, 936-953 (2007).
226. S.K.S. Wong, Environmental requirements, knowledge sharing and green innovation: empirical evidence from the electronics industry in China, Bus. Strateg. Environ, 22, 321-338 (2013).
227. V. Goepp, E. Caillaud and B. Rose, A framework for the design of knowledge management systems in eco-design, Int. J. Prod. Res., 51, 5803-5823 (2013).
228. F. Zhang, et al., Toward an systemic navigation framework to integrate sustainable development into the company, J. Clean. Prod., 54, 199-214 (2013).
229. M. Rio, T. Reyes and L. Roucoules, FESTivE: An information system method to improve product designers and environmental experts information exchanges, J. Clean. Prod., 83, 329-340 (2014).
230. D. Eddy, et al., An integrated approach to information modeling for the sustainable design of products, J. Comput. Inf. Sci. Eng., 14, (2014).
231. H. Andriankaja, F. Vallet, J. Le Duigou and B. Eynard, A method to ecodesign structural parts in the transport sector based on product life cycle management, J. Clean. Prod., 94, 165-176 (2015).
232. M.K. Low and D.J. Williams, A framework to encourage step-change reduction in environmental impact in the creation of electronics products, IEEE Trans. Electron. Packag. Manuf, 24, 136-143 (2001).
233. J.Y. Zhu and A. Deshmukh, Application of Bayesian decision networks to life cycle engineering in Green design and manufacturing, Eng. Appl. Artif. Intell, 16, 91-103 (2003).
234. G.A. Keoleian and K. Kar, Elucidating complex design and management tradeoffs through life cycle design: Air intake manifold demonstration project, J. Clean. Prod., 11, 61-77 (2003).
235. R. Gheorghe and P. Xirouchakis, Decision-based methods for early phase sustainable product design, Int. J. Eng. Educ., 23, 1065-1080 (2007).
236. K. Verghese and D. Hes, Qualitative and quantitative tool development to support environmentally responsible decisions, J. Clean. Prod., 15, 814-818 (2007).
237. K. Sakita and T. Mori, Environmental simulation system for environmentally conscious product design, STROJARSTVO, 49, 85-89 (2007).
238. P. Boonkanit and A. Aphikajornsin, An energetic ecodesign at conceptual design phase, Int. J. Ind. Eng. Appl. Pract., 17, 190-199 (2010).
239. A. Anand and M.F. Wani, Product life-cycle modeling and evaluation at the conceptual design stage: A digraph and matrix approach, J. Mech. Des., 132, (2010).
240. S. Devanathan, D. Ramanujan, W.Z. Bernstein, F. Zhao and K. Ramani, Integration of sustainability into early design through the function impact matrix, J. Mech. Des., 132, 081004 (2010).
241. D.P. Fitzgerald, J.W. Herrmann and L.C. Schmidt, A conceptual design tool for resolving conflicts between product functionality and environmental impact, J. Mech. Des., 132, 091006 (2010).
242. D.-C. Gong and Y.-T. Wang, UML presentation of a conceptual green design control system to react to environmental requirements, Int. J. Adv. Manuf. Technol, 52, 463-476 (2011).
243. A. Kengpol and P. Boonkanit, The decision support framework for developing Ecodesign at conceptual phase based upon ISO/TR 14062, Int. J. Prod. Econ., 131, 4-14 (2011).
244. T.-A. Chiang, Z.H. Che and T.-T. Wang, A design for environment methodology for evaluation and improvement of derivative consumer electronic product development, J. Syst. Sci. Syst. Eng., 20, 260-274 (2011).
245. M. Inoue, et al., Decision-making support for sustainable product creation, Adv. Eng. INFORMATICS, 26, 782-792 (2012).
246. C.-C. Tsai, A research on selecting criteria for new green product development project: Taking Taiwan consumer electronics products as an example, J. Clean. Prod., 25, 106-115 (2012).
247. C. Chen and J. Zhang, Green product design with engineering tradeoffs under technology efficient frontiers: analytical results and empirical tests, IEEE Trans. Eng. Manag, 60, 340-352 (2013).
248. C.Y. Ng and K.B. Chuah, Evaluation of design alternatives' environmental Performance using AHP and ER approaches, IEEE Syst. J., 8, 1182-1189 (2014).
249. X. Wang, H.K. Chan and L. White, A comprehensive decision support model for the evaluation of eco-designs, J. Oper. Res. Soc., 65, 917-934 (2014).
250. X. Wang, H.K. Chan, C.K.M. Lee and D. Li, A hierarchical model for eco-design of consumer electronic products, Technol. Econ. Dev. Econ., 21, 48-64 (2015).
251. T.A. Lenau and N. Bey, Design of environmentally friendly products using indicators, Int. J. Manuf. Eng., 215, 637-645 (2001).
252. I.-T. Jeong and K.-M. Lee, Assessment of the ecodesign improvement options using the global warming and economic performance indicators, J. Clean. Prod., 17, 1206-1213 (2009).
253. M.D. Tabone, J.J. Cregg, E.J. Beckman and A.E. Landis, Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers, Environ. Sci. Technol., 44, 8264-8269 (2010).
254. C. Askham, A.L. Gade and O.J. Hanssen, Combining REACH, environmental and economic performance indicators for strategic sustainable product development, J. Clean. Prod., 35, 71-78 (2012).
255. L.D. Ingeneer, F. Mathieux and D. Brissaud, A new 'in-use energy consumption' indicator for the design of energy-efficient electr(on)ics, J. Eng. Des., 23, 217-235 (2012).
256. C.A. Dean, B.D. Fath and B. Chen, Indicators for an expanded business operations model to evaluate eco-smart corporate communities, Ecol. Indic., 47, 137-148 (2014).
257. C.L. Chen, Design for the environment: A quality-based model for green product development, Manage. Sci., 47, 250-263 (2001).
258. J.L. De Vries and H.R.M. te Riele, Playing with hyenas-Renovating environmental product policy strategy, J. Ind. Ecol., 10, 111-127 (2006).
259. F. Schiavone, M. Pierini and V. Eckert, Strategy-based approach to eco-design: Application to an automotive component, Int. J. Veh. Des., 46, 156-171 (2008).
260. J.K. Choi, L.F. Nies and K. Ramani, A framework for the integration of environmental and business aspects toward sustainable product development, J. Eng. Des., 19, 431-446 (2008).
261. S. Kondoh and N. Mishima, Strategic decision-making method for eco-business planning, CIRP Ann.-Manuf. Technol, 59, 41-44 (2010).
262. S.H.M. Zailani, T.K. Eltayeb, C.-C. Hsu and K.C. Tan, The impact of external institutional drivers and internal strategy on environmental performance, Int. J. Oper. Prod. Manag, 32, 721-745 (2012).
263. Y.-S Chen and C.-H. Chang, The determinants of green product development performance: green dynamic capabilities, green transformational leadership and green creativity, J. Bus. ETHICS, 116, 107-119 (2013).
264. S.I. Hallstedt, A.W. Thompson and P. Lindahl, Key elements for implementing a strategic sustainability perspective in the product innovation process, J. Clean. Prod., 51, 277-288 (2013).
265. J.-C. Tu, P.-L. Chiu, Y.-C. Huang and C.-Y. Hsu, Influential factors and strategy of sustainable product development under corporate social responsibility in taiwan, Math. Probl. Eng., (2013), doi:10.1155/2013/303850.
266. V. Panapanaan, T. Uotila and A. Jalkala, creation and alignment of the eco-innovation strategy model to regional innovation strategy: A case from lahti (Paijat-Hame Region), Finland, Eur. Plan. Stud., 22, 1212-1234 (2014).
267. H. Kim, S.H. Lee and K. Yang, The heuristic-systemic model of sustainability stewardship: Facilitating sustainability values, beliefs and practices with corporate social responsibility drives and eco-labels/indices, Int. J. Consum. Stud, 39, 249-260 (2015).
268. C.-H. Chang, Proactive and reactive corporate social responsibility: Antecedent and consequence, Manag. Decis., 53, 451-468 (2015).
269. W.P. Schmidt, Life cycle costing as part of design for environment-Environmental business cases, Int. J. LIFE CYCLE Assess., 8, 167-174 (2003).
270. H.-M. Wee, M.-C. Lee, J.C.P. Yu and C.E. Wang, Optimal replenishment policy for a deteriorating green product: Life cycle costing analysis, Int. J. Prod. Econ., 133, 603-611 (2011).
271. T. Sakao, A QFD-centred design methodology for environmentally conscious product design, Int. J. Prod. Res., 45, 4143-4162 (2007).
272. C.P. Ge and B. Wang, An activity-based modelling approach for assessing the key stakeholders' corporation in the eco-conscious design of electronic products, J. Eng. Des., 18, 55-71 (2007).
273. P. Park and K. Tahara, Quantifying producer and consumer-based eco-efficiencies for the identification of key ecodesign issues, J. Clean. Prod., 16, 95-104 (2008).
274. E.F. MacDonald, R. Gonzalez and P.Y. Papalambros, Preference Inconsistency in Multidisciplinary Design Decision Making, J. Mech. Des., 131, (2009).
275. T. Ramayah, J.W.C. Lee and O. Mohamad, Green product purchase intention: Some insights from a developing country, Resour. Conserv. Recycl, 54, 1419-1427 (2010).
276. L. Zhang, Y. Zhan, Z.F. Liu, H.C. Zhang and B.B. Li, Development and analysis of design for environment oriented design parameters, J. Clean. Prod., 19, 1723-1733 (2011).
277. S. Vinodh and G. Rathod, Application of fuzzy logic-based environmental conscious QFD to rotary switch: A case study, CLEAN Technol. Environ. POLICY, 14, 319-332 (2012).
278. C.-S. Liao, K.-R. Lou and C.-T. Gao, Sustainable Development of Electrical and Electronic Equipment: User-driven Green Design for Cell Phones, Bus. Strateg. Environ, 22, 36-48 (2013).
279. W.-M. Hur, Y. Kim and K. Park, Assessing the effects of perceived value and satisfaction on customer loyalty: A 'Green' perspective, Corp. Soc. Responsib. Environ. Manag, 20, 146-156 (2013).
280. I. Bereketli and M.E. Genevois, An integrated QFDE approach for identifying improvement strategies in sustainable product development, J. Clean. Prod., 54, 188-198 (2013).
281. S.-C. Tseng and S.-W. Hung, A framework identifying the gaps between customers' expectations and their perceptions in green products, J. Clean. Prod. 59, 174-184 (2013).
282. S. Vinodh, V. Kamala and K. Jayakrishna, Integration of ECQFD, TRIZ and AHP for innovative and sustainable product development, Appl. Math. Model, 38, 2758-2770 (2014).
283. E. Cor, L. Domingo, D. Brissaud and P. Zwolinski, A protocol to perform usage oriented ecodesign, CIRP Ann. Technol, 63, 169-172 (2014).
284. F. Lemke and J.P.P. Luzio, Exploring green consumers' mind-set toward green product design and life cycle assessment the case of skeptical Brazilian and portuguese green consumers, J. Ind. Ecol., 18, 619-630 (2014).
285. J. Ammenberg and E. Sundin, Products in environmental management systems: The role of auditors, J. Clean. Prod., 13, 417-431 (2005).
286. P. Erol and J. Thoming, ECO-design of reuse and recycling networks by multi-objective optimization, J. Clean. Prod., 13, 1492-1503 (2005).
287. J. Tingstrom, L. Swanstrom and R. Karlsson, Sustainability management in product development projects-The ABB experience, J. Clean. Prod., 14, 1377-1385 (2006).
288. H. Ny, J.P. MacDonald, G. Broman, R. Yamamoto and K.H. Robert, Sustainability constraints as system boundaries-An approach to making life-cycle management strategic, J. Ind. Ecol., 10, 61-77 (2006).
289. N.-J. Chang, C.-M. Fong, Green product quality, green corporate image, green customer satisfaction and green customer loyalty, AFRICAN J. Bus. Manag, 4, 2836-2844 (2010).
290. R. Pamfilie, R. Procopie and M. Bobe, Managing eco-design of industrial goods and consumers' protection nexus, AMFITEATRU Econ., 12, 454-465 (2010).
291. P. Kurczewski and A. Lewandowska, ISO 14062 in theory and practice-ecodesign procedure. Part 2: Practical application, Int. J. Life Cycle Assess., 777-784 (2010), doi:10.1007/s11367-010-0231-0.
292. A. Lewandowska and P. Kurczewski, ISO 14062 in theory and practice-ecodesign procedure, Part 1: Structure and theory, Int. J. 769-776 (2010), doi:10.1007/s11367-010-0228-8.
293. S. Vinodh, M. Prasanna and S. Manoj, Application of analytical network process for the evaluation of sustainable business practices in an Indian relays manufacturing organization, CLEAN Technol. Environ. POLICY, 14, 309-317 (2012).
294. W.-H. Tsai, et al., Applying a mathematical programming approach for a green product mix decision, Int. J. Prod. Res., 50, 1171-1184 (2012).
295. D.C. Pigosso, H.a. Rozenfeld and T.C. McAloone, Ecodesign maturity model: A management framework to support ecodesign implementation into manufacturing companies, J. Clean. Prod., 1-14 (2013), doi:10.1016/j.jclepro.2013.06.040.
296. A.A. Alblas, K. (Alex), Peters, J.C. (Kristian) and Wortmann, (Hans). Fuzzy sustainability incentives in new product development An empirical exploration of sustainability challenges in manufacturing companies, Int. J. Oper. Prod. Manag, 34, 513-545 (2014).
297. M. Fargnoli, M. De Minicis and M. Tronci, Design Management for Sustainability: An integrated approach for the development of sustainable products, J. Eng. Technol. Manag, 34, 29-45 (2014).
298. G. Radonjic, A. Pisnik and D. Krajnc, Product ecodesign in companies with iso 14001 certified environmental management system, Environ. Eng. Manag. J., 14, 167-181 (2015).
299. F. Brones and M.M. de Carvalho, From 50 to 1: Integrating literature toward a systemic ecodesign model, J. Clean. Prod., 96, 44-57 (2015).
300. C.J. Chiappetta Jabbour, D. Jugend, A.B. de Sousa Jabbour, A. Gunasekaran and H. Latan, Green product development and performance of Brazilian firms: Measuring the role of human and technical aspects, J. Clean. Prod., 87, 442-451 (2015).
301. M. Lindahl, Engineering designers' experience of design for environment methods and tools-requirement definitions from an interview study, J. Clean. Prod., 14, 487-496 (2006).
302. N.V. Hernandez, G.O. Kremer, L.C. Schmidt and P.R.A. Herrera, Development of an expert system to aid engineers in the selection of design for environment methods and tools, Expert Syst. Appl., 39, 9543-9553 (2012).
303. M.-C. Chiu and C.-H. Chu, Review of sustainable product design from life cycle perspectives, Int. J. Precis. Eng. Manuf, 13, 1259-1272 (2012).
304. A. Birch, K.K.B. Hon and T. Short, Structure and output mechanisms in Design for Environment (DfE) tools, J. Clean. Prod., 35, 50-58 (2012).
305. J.L. Casamayor and D. Su, Integration of eco-design tools into the development of eco-lighting products, J. Clean. Prod., 47, 32-42 (2013).
306. V. Goepp, B. Rose and E. Caillaud, Coupling reference modelling and performance evaluation for the effective integration of eco-design tools into the design process, Int. J. Comput. Integr. Manuf, 27, 242-265 (2014).
307. C. Vezzoli and D. Sciama, Life Cycle Design: From general methods to product type specific guidelines and checklists: A method adopted to develop a set of guidelines/checklist handbook for the eco-efficient design of NECTA vending machines, J. Clean. Prod., 14, 1319-1325 (2006).
308. S. Byggeth, G. Broman and K.-H. Robert, A method for sustainable product development based on a modular system of guiding questions, J. Clean. Prod., 15, 1-11 (2007).
309. C. Alves, et al., Sustainable design procedure: The role of composite materials to combine mechanical and environmental features for agricultural machines, Mater. Des., 30, 4060-4068 (2009).
310. Y. Kishita, et al., Checklist-Based Assessment Methodology for Sustainable Design, J. Mech. Des., 132, (2010).
311. J.P. Santos, M. Oliveira, F.G. Almeida, J.P. Pereira and A. Reis, Improving the environmental performance of machine-tools: Influence of technology and throughput on the electrical energy consumption of a press-brake. J. Clean. Prod. 19, 356-364 (2011).
312. C.A. Grote, R.M. Jones, G.N. Blount, J. Goodyer and M. Shayler, An approach to the EuP Directive and the application of the economic eco-design for complex products, Int. J. Prod. Res., 45, 4099-4117 (2007).
313. K. Parikka-Alhola, Promoting environmentally sound furniture by green public procurement, Ecol. Econ., 68, 472-485 (2008).
314. M. Zackrisson, C. Rocha, K. Christiansen and A. Jarnehammar, Stepwise environmental product declarations: Ten SME case studies, J. Clean. Prod., 16, 1872-1886 (2008).
315. F. Taghaboni-Dutta, A.J.C. Trappey and C.V. Trappey, An XML based supply chain integration hub for green product lifecycle management, Expert Syst. Appl., 37, 7319-7328 (2010).
316. E. Brouillat and V. Oltra, Extended producer responsibility instruments and innovation in eco-design: An exploration through a simulation model, Ecol. Econ., 83, 236-245 (2012).
317. W.K.C. Yung, et al., Eco-redesign of a personal electronic product subject to the energy-using product directive, Int. J. Prod. Res., 50, 1411-1423 (2012).
318. M. Dubois, Extended producer responsibility for consumer waste: The gap between economic theory and implementation, WASTE Manag. Res., 30, 36-42 (2012).
319. K. Schischke, N.F. Nissen and K.-D. Lang, Welding Equipment under the Energy-related Products Directive The Process of Developing Eco-design Criteria, J. Ind. Ecol., 18, 517-528 (2014).
320. S. Le Pochat, G. Bertoluci and D. Froelich, Integrating ecodesign by conducting changes in SMEs, J. Clean. Prod., 15, 671-680 (2007).
321. S. Gonzalez-Garcia, et al., Application of ecodesign methodology in smes run according to lean management: the case of a furniture publishing company, Environ. Eng. Manag. J., 13, 2977-2988 (2014).
322. Y. Umeda, S. Fukushige, K. Tonoike and S. Kondoh, Product modularity for life cycle design, CIRP Ann.-Manuf. Technol, 57, 13-16 (2008).
323. S. Hickey, C. Fitzpatrick, M. O'Connell and M. Johnson, Use phase signals to promote lifetime extension for windows PCs, Environ. Sci. Technol, 43, 2544-2549 (2009).
324. X. Qian and H.C. Zhang, Design for Environment: An Environmentally Conscious Analysis Model for Modular Design, IEEE Trans. Electron. Packag. Manuf, 32, 164-175 (2009).
325. S. Smith and C.-C. Yen, Green product design through product modularization using atomic theory, Robot. Comput. Integr. Manuf, 26, 790-798 (2010).
326. O. Pialot, D. Millet and N. Tchertchian, How to explore scenarios of multiple upgrade cycles for sustainable product innovation: the "Upgrade Cycle Explorer'' tool, J. Clean. Prod., 22, 19-31 (2012).
327. J. Yan, C. Feng and K. Cheng, Sustainability-oriented product modular design using kernel-based fuzzy c-means clustering and genetic algorithm, Proc. Inst. Mech. Eng. PART B-JOURNAL Eng. Manuf, 226, 1635-1647 (2012).
328. V.N. Ajukumar and O.P. Gandhi, Evaluation of green maintenance initiatives in design and development of mechanical systems using an integrated approach, J. Clean. Prod., 51, 34-46 (2013).
329. Y. Ji, R.J. Jiao, L. Chen and C. Wu, Green modular design for material efficiency: A leader follower joint optimization model, J. Clean. Prod., 41, 187-201 (2013).
330. C. Bakker, F. Wang, J. Huisman and M. den Hollander, Products that go round: exploring product life extension through design, J. Clean. Prod., 69, 10-16 (2014).
331. S. Yu, Q. Yang, J. Tao and X. Xu, Incorporating Quality Function Deployment with modularity for the end-of-life of a product family, J. Clean. Prod., 87, 423-430 (2015).
332. I. Ben-Gal, R. Katz and Y. Bukchin, Robust eco-design: A new application for air quality engineering, IIE Trans, 40, 907-918 (2008).
333. I. Gremyr, V. Siva, H. Raharjo and T.N. Goh, Adapting the Robust Design Methodology to support sustainable product development, J. Clean. Prod., 79, 231-238 (2014).
334. S. Hoffenson, A. Dagman and R. Soderberg, Tolerance optimisation considering economic and environmental sustainability, J. Eng. Des., 25, 367-390 (2014).
335. R.M. Dangelico and P. Pontrandolfo, From green product definitions and classifications to the green option matrix, J. Clean. Prod., 18, 1608-1628 (2010).
336. A. Sharma and G.R. Iyer, Resource-constrained product development: Implications for green marketing and green supply chains, Ind. Mark. Manag, 41, 599-608 (2012).
337. B.C.Y. Lee, Critical decisions in new product launch: Pricing and advertising strategies on consumer adoption of green product innovation, ASIAN J. Technol. Innov., 22, 16-32 (2014).
338. J. Ma, M. Kwak and H.M. Kim, Demand trend mining for predictive life cycle design, J. Clean. Prod., 68, 189-199 (2014).
339. E. Sanye-Mengual, et al., Eco-Designing the use phase of products in sustainable manufacturing the importance of maintenance and communication-to-user strategies, J. Ind. Ecol., 18, 545-557 (2014).
340. N. Kaufman, Overcoming the barriers to the market performance of green consumer goods, Resour. ENERGY Econ., 36, 487-507 (2014).
341. J. Kim, H. Wang, J. Kim and S. Lee, The analysis and design of rf sub-sampling frontend for SDR, Aperture, 5, 5-9
342. K.-H. Lee and J.-W. Kim, Integrating suppliers into green product innovation development: an empirical case study in the semiconductor industry, Bus. Strateg. Environ, 20, 527-538 (2011).
343. T. Arslan, V. Yilmaz and H.K. Aksoy, Structural equation model for environmentally conscious purchasing behavior, Int. J. Environ. Res., 6, 323-334 (2012).
344. M.-C. Chiu and L.-W. Teng, sustainable product and supply chain design decisions under uncertainties, Int. J. Precis. Eng. Manuf, 14, 1953-1960 (2013).
345. V.-H. Lee, K.-B. Ooi, A.Y.-L. Chong and C. Seow, Creating technological innovation via green supply chain management: An empirical analysis, Expert Syst. Appl., 41, 6983-6994 (2014).
346. R. Rostamzadeh, K. Govindan, A. Esmaeili and M. Sabaghi, Application of fuzzy VIKOR for evaluation of green supply chain management practices, Ecol. Indic., 49, 188-203 (2015).
347. N.M.P. Bocken, J.M. Allwood, A.R. Willey and J.M.H. King, Development of an eco-ideation tool to identify stepwise greenhouse gas emissions reduction options for consumer goods, J. Clean. Prod., 19, 1279-1287 (2011).
348. C.J. Yang and J.L. Chen, Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method, J. Clean. Prod., 19, 998-1006 (2011).
349. D. Russo, C. Rizzi and G. Montelisciani, Inventive guidelines for a TRIZ-based eco-design matrix, J. Clean. Prod., 76, 95-105 (2014).
350. B. Tyl, J. Legardeur, D. Millet and F. Vallet, A comparative study of ideation mechanisms used in eco-innovation tools, J. Eng. Des., 25, 325-345 (2014).
351. M. Borchardt, M.A. Sellitto, G.M. Pereira and L.P. Gomes, ecodesign case studies for furniture companies using the analytic hierarchy process, Int. J. Ind. Eng. Appl. Pract., 19, 330-340 (2012).
352. J.C.P. Su, C.-H. Chu and Y.-T. Wang, A decision support system to estimate the carbon emission and cost of product designs, Int. J. Precis. Eng. Manuf, 13, 1037-1045 (2012).
353. D.C. Eddy, S. Krishnamurty, I.R. Grosse, J.C. Wileden and K.E. Lewis, A normative decision analysis method for the sustainability-based design of products, J. Eng. Des., 24, 342-362 (2013).
354. Z. Lounis and L. Daigle, Multi-objective and probabilistic decision-making approaches to sustainable design and management of highway bridge decks, Struct. Infrastruct. Eng., 9, 364-383 (2013).
355. R.A.R. Ghazilla, Z. Taha, S. Yusoff, S.H. Abdul-Rashid and N. Sakundarini, Development of decision support system for fastener selection in product recovery oriented design, Int. J. Adv. Manuf. Technol, 70, 1403-1413 (2014).
356. L.G. Beng and B. Omar, Integrating axiomatic design principles into sustainable product development, Int. J. Precis. Eng. Manuf. Technol, 1, 107-117 (2014).
357. D. Ramanujan, et al., Prioritizing Design for Environment Strategies using a stochastic analytic hierarchy process, J. Mech. Des., 136, (2014).
358. A. Romli, P. Prickett, R. Setchi and S. Soe, Integrated eco-design decision-making for sustainable product development, Int. J. Prod. Res., 53, 549-571 (2015).
359. S.-R. Lim, Y.R. Kim, S.H. Woo, D. Park and J.M. Park, System optimization for eco-design by using monetization of environmental impacts: a strategy to convert bi-objective to single-objective problems, J. Clean. Prod., 39, 303-311 (2013).
360. R.-C. Tsaur, Green product pricing decision analysis with application to personal computers, Int. J. Prod. Res., 53, 307-320 (2015).
361. T.P. Gloria, et al., A statistical approach to interpret relative environmental performance within product categories, Int. J. LIFE CYCLE Assess., 19, 491-499 (2014).
362. L. Serna-Mansoux, A. Popoff and D.A Millet, Simplified model to include dynamic product-user interaction in the eco-design process the paper towel dispenser case Study, J. Ind. Ecol., 18, 529-544 (2014).
363. R. Allais, T. Reyes and L. Roucoules, Inclusion of territorial resources in the product development process, J. Clean. Prod., 94, 187-197 (2015).