An implemented framework to estimate manufacturing-related energy consumption in product design

International Journal of Computer Integrated Manufacturing

Volumn 26, Issue 9, 2013, Pages 866-880

  Bonvoisin, Jérémy ^a   Thiede, Sebastian ^b   Brissaud, Daniel ^a   Herrmann, Christoph ^b  

^a UNIV GRENOBLE ALPES   (France)

^b TECHNICAL UNIVERSITY OF BRAUNSCHWEIG   (Germany)

Author keywords

cleaner production; ecodesign; energy efficiency; life cycle assessment; process chain simulation; product embodied energy

Indexed keywords

CONCRETE PRODUCTS; ECODESIGN; ENERGY EFFICIENCY; ENERGY TRANSFER; ENERGY UTILIZATION; MANUFACTURE; POLLUTION CONTROL; PRODUCT DESIGN; SOFTWARE PROTOTYPING;

CLEANER PRODUCTION; CONCEPTUAL FRAMEWORKS; EMBODIED ENERGY; ENERGY CONSUMPTION MODEL; LIFE CYCLE ASSESSMENT (LCA); MANUFACTURING STAGES; PROCESS-CHAIN SIMULATIONS; PRODUCT MANUFACTURING;

LIFE CYCLE;

EID: 84882893113     PISSN: 0951192X     EISSN: 13623052     Source Type: Journal    
DOI: 10.1080/0951192X.2013.799782     Document Type: Article

References (40)

1. Abele, E., Reiner, A., and, Birkhofer, H. 2004. Environmentally-Friendly Product Development: Methods and Tools, Berlin: Springer.
2. Avram, O. I., and, Xirouchakis, P. 2011. Evaluating the Use Phase Energy Requirements of a Machine Tool System. Journal of Cleaner Production, 19 (6-7): 699-711.
3. Brissaud, D., Tichkiewitch, S., and, Zwolinski, P. 2006. Innovation in Life Cycle Engineering and Sustainable Developmen. Berlin: Springer.
4. CECIMO, PE International. 2009. Concept Description for CECIMO's Self-Regulatory Initiative (SRI) for the Sector Specific Implementation of the Directive 2005/32/EC (EuP Directive). http://energimyndigheten.se/Global/ F%C3%B6retag/SRI-MachineTools-091016%20(2).pdf (http://energimyndigheten.se/ Global/F%C3%B6retag/SRI-MachineTools-091016%20(2).pdf)
5. Chougule, R. G., and, Ravi, B. 2006. Casting Cost Estimation in an Integrated Product and Process Design Environment. International Journal of Computer Integrated Manufacturing, 19 (7): 676-688.
6. Diaz, N., Helu, M., Jayanathan, S., Yifen, C., Horvath, A., and, Dornfeld, D. May 17-19 2010. Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments, May 17-19, Arlington, VA: Paper presented at the International Symposium on Sustainable Systems and Technology (ISSST).
7. Diaz, N., Redelsheimer, E., and, Dornfeld, D. 2011. " Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use ". In Glocalized Solutions for Sustainability in Manufacturing, Edited by: Hesselbach, J. and Herrmann, C. 263-267. Berlin: Springer.
8. Dietmair, A., and, Verl, A. May 19-21 2010. Energy Consumption Assessment and Optimisation in the Design and Use Phase of Machine Tools, May 19-21, Hefei: Paper presented at the 17th CIRP Life cycle Engineering Conference.
9. Domingo, L., Mathieux, F., and, Brissaud, D. 2011. A New in-Use Energy Consumption Indicator for the Design of Energy-Efficient Electr(on)ics. Journal of Engineering Design, 23 (2): 217-235.
10. Goedkoop, M., R. Heijungs, M. Huijbregts, A. De Schryver, J. Struijs, and R. van Zelm 2009. ReCiPe 2008-A Life Cycle Impact Assessment Method Which Comprises Harmonised Category Indicators at the Midpoint and the Endpoint Level. http://www.pre-sustainability.com/download/misc/ReCiPe-main-report-final-27-02- 2009-web.pdf (http://www.pre-sustainability.com/download/misc/ReCiPe-main- report-final-27-02-2009-web.pdf)
11. Goedkoop, M., and, Spriensma, R. 2001. The Eco-indicator 99-A Damage Oriented Method for Life Cycle Impact Assessment-Methodology Annex, 3rd ed, Netherlands: PRé Consultats B.V. Amersfoort.
12. Gutowski, T., Dahmus, J., and, Thiriez, A. 2006. Electrical Energy Requirements for Manufacturing Processes. Energy, 2: 623-628.
13. Heilala, J., Saija, V., Tonteri, H., Montonen, J., Johansson, B., Stahre, J., and, Lind, S. December 2008. Simulation-Based Sustainable Manufacturing System Design, December, 7-10. Miami, FL: Paper presented at the 40th Conference on Winter Simulation.
14. Herrmann, C. 2010. Ganzheitliches Life Cycle Management: Nachhaltigkeit und Lebenszyklusorientierung in Unternehmen, Berlin: Springer.
15. Herrmann, C., and, Thiede, S. 2009. Process Chain Simulation to Foster Energy Efficiency in Manufacturing. CIRP Journal of Manufacturing Science and Technology, 1 (4): 221-229.
16. Herrmann, C., Thiede, S., Kara, S., and, Hesselbach, J. 2011. Energy Oriented Simulation of Manufacturing Systems-Concept and Application. CIRP Annals-Manufacturing Technology, 60 (1): 45-48.
17. Hesselbach, J., Herrmann, C., Detzer, R., Martin, L., Thiede, S., and, Ludemann, B. March 17-19 2008. Energy Efficiency through Optimised Coordination of Production and Technical Building Services, March 17-19, Sydney: Paper presented at the 15th CIRP International Conference on Life Cycle Engineering.
18. Jiang, Z., Zhang, H., Yan, W., Zhou, M., and, Li, G. 2012. A Method for Evaluating Environmental Performance of Machining Systems. International Journal of Computer Integrated Manufacturing, 25 (6): 488-495.
19. Johansson, B., Kacker, R., Kessel, R., McLean, C., and, Sriram, R. August 30-September 2 2009. Utilizing Combinatorial Testing on Discrete Event Simulation Models for Sustainable Manufacturing, August 30-September 2, San Diego, CA: Paper presented at the Design for Manufacturing and the Life Cycle Conference.
20. Kellens, K., Dewulf, R. W., and, Duflou, J. R. 2011. " Preliminary Environmental Assessment of Electrical Discharge Machining ". In Glocalized Solutions for Sustainability in Manufacturing, Edited by: Hesselbach, J. and Herrmann, C. 377-382. Berlin: Springer.
21. Leibrecht, S. 2005. Fundamental Principles for CAD-based Ecological Assessments. The International Journal of Life Cycle Assessment, 10 (6): 436-444.
22. Li, W., and, Kara, S. 2011. An Empirical Model for Predicting Energy Consumption of Manufacturing Processes: A Case of Turning Process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (9): 1636-1646.
23. Miao, H. K., Sridharan, N., and, Shah, J. J. 2002. CAD-CAM Integration Using Machining Features. International Journal of Computer Integrated Manufacturing, 15 (4): 296-318.
24. Millet, D., Bistagnino, L., Lanzavecchia, C., Camous, R., and, Poldma, T. 2007. Does the Potential of the Use of LCA Match the Design Team Needs?. Journal of Cleaner Production, 15 (4): 335-346.
25. Mognol, P., Lepicart, D., and, Perry, N. 2006. Rapid Prototyping: Energy and Environment in the Spotlight. Rapid Prototyping Journal, 12 (1): 26-34.
26. Narita, H., and, Fujimoto, H. July 29-August 2 2007. Environmental Burden 1050 Analysis Due to High Speed Milling, July 29-August 2, Valparaiso: Paper presented at the 19th International Conference on Production Research.
27. Nawata, S., and, Aoyama, T. December 11-15 2001. Life-Cycle Design System for Machined Parts-Linkage of LCI Data to CAD/CAM Data, December 11-15, 299-302. Tokyo: Paper presented at the Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing.
28. Quintana, G., Ciurana, J., and, Ribatallada, J. 2011. Modelling Power Consumption in Ball-End Milling Operations. Materials and Manufacturing Processes, 26 (5): 746-756.
29. Rahimifard, S., Seow, Y., and, Childs, T. 2010. Minimising Embodied Product Energy to Support Energy Efficient Manufacturing. CIRP Annals-Manufacturing Technology, 59 (1): 25-28.
30. Rebhan, E. 2002. Energiehandbuch-Gewinnung, Wandlung und Nutzung von Energie, Berlin: Springer.
31. Santos, J. P., Oliveira, M., Almeida, F. G., Pereira, J. P., and, Reis, A. 2011. Improving the Environmental Performance of Machine-Tools: Influence of Technology and through put on the Electrical Energy Consumption of a Press-Brake. Journal of Cleaner Production, 19 (4): 356-364.
32. Seow, Y., and, Rahimifard, S. 2011a. " Improving Product Design based on Energy Considerations ". In Glocalized Solutions for Sustainability in Manufacturing, Edited by: Hesselbach, J. and Herrmann, C. 154-159. Berlin: Springer.
33. Seow, Y., and, Rahimifard, S. 2011b. A Framework for Modelling Energy Consumption within Manufacturing Systems. CIRP Journal of Manufacturing Science and Technology, 4 (3): 258-264.
34. Solding, P., Petku, D., and, Mardan, N. 2009. Using Simulation for More Sustainable Production Systems-Methodologies and Case Studies. International Journal of Sustainable Engineering, 2 (2): 111-122.
35. Taha, Z., Kurniati, H., Aoyama, H., Ghazilla, R. A., Gonzales, J., and, Sakundarini, N. April 11-13 2010. Linkage of Power Consumption to Design Feature on Turning Process, April 11-13, Hangzhou: Paper presented at the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology.
36. Thiede, S. 2012. Energy Efficiency in Manufacturing Systems, Berlin: Springer.
37. Thiede, S., Seow, Y., Andersson, J., and, Johansson, B. 2012. Environmental Aspects in Manufacturing System Modelling and Simulation-State of the Art and Research Perspectives. CIRP Journal of Manufacturing Science and Technology, 6 (1): 78-87.
38. Thiriez, A., and, Gutowski, T. May 8-11 2006. An Environmental Analysis of Injection Molding, May 8-11, 195-200. Scottsdale, AZ: Paper presented at the IEEE International Symposium on Electronics and the Environment.
39. Wanyama, W., Ertas, A., Zhang, H.-C., and, Ekwaro-Osire, S. 2003. Life-Cycle Engineering: Issues, Tools and Research. International Journal of Computer Integrated Manufacturing, 16 (4-5): 307-316.
40. Weinert, N., Chiotellis, S., and, Seliger, G. December 2-4 2009. Concept for Energy-Aware Production Planning based on Energy Blocks, December 2-4, Chennai: Paper presented at the 7th Global Conference on Sustainable Manufacturing.