A modular eco-design method for life cycle engineering based on redesign risk control

International Journal of Advanced Manufacturing Technology

Volumn 56, Issue 9-12, 2011, Pages 1215-1233

  Yang, Qingyan ^a   Yu, Suiran ^a   Sekhari, Aicha ^b  

^a SHANGHAI JIAO TONG UNIVERSITY   (China)

^b UNIVERSITÉ DE LYON   (France)

Author keywords

Eco design; GGA; Modular design; Redesign risk control

Indexed keywords

COMMON PROBLEMS; ECODESIGN; EMPIRICAL METHOD; ENVIRONMENTAL ATTRIBUTES; GGA; LIFE CYCLE ENGINEERING; MODULAR DESIGNS; MODULAR METHODS; OPTIMIZATION PROCESS; RECYCLABILITY; RISK CONTROLS;

LIFE CYCLE; MAINTAINABILITY; PROBLEM SOLVING; RESEARCH; REUSABILITY; RISK ASSESSMENT;

DESIGN;

EID: 80053568108     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-011-3246-1     Document Type: Article

References (39)

1. B Zoeteman HR Krikke J Venselaar 2010 Handling WEEE waste flows: on the effectiveness of producer responsibility in a globalizing world Int J Adv Manuf Technol 47 414 436 10.1007/s00170-009-2358-3
2. Parliament UK (2005) Securing the future delivering UK sustainable development strategy. CM6467, London
3. United Nation Environmental Program (UNEP) (1997) Eco-design: a promising approach to sustainable production and consumption. United Nations, Washington
4. Brezet H (1997) Dynamics in eco-design practice. UNEP Industry and Environment (UNEP), Washington
5. C-C Huang A Kusiak 1998 Modularity in design of products and system IEEE Trans Syst Man Cybern, Part A, Syst Humans 28 1 66 77 10.1109/3468.650323
6. A Kusiak C-C Huang 1996 Development of modular products IEEE Trans Compon Packag Manuf Technol Part A 19/4 523 531 10.1109/95.554934
7. P Gu S Sosale 1997 An integrated modular design methodology for life-cycle engineering CIRP Ann 46 71 74 10.1016/S0007-8506(07)60778-1
8. Z Liu X Liu 2002 Recycling strategy and a recyclability assessment model based on an artificial neural network J Mater Process Technol 129 500 506 10.1016/S0924-0136(02)00625-8
9. F Kimura S Kato T Hata T Masuda 2001 Product modularization for part reuse in inverse manufacturing CIRP Ann 50 92 98 10.1016/S0007-8506(07)62078-2
10. L Wang W Shen H Xie J Neelamkavil A Pardasani 2002 Collaborative conceptual design-state of the art and future trends Comput-Aided Des 34 981 996 10.1016/S0010-4485(01)00157-9 (Pubitemid 34704496)
11. P Gu S Sosale 1999 Product modularization for life cycle engineering Robot Comput-Integr Manuf 15 387 401 10.1016/S0736-5845(99)00049-6 (Pubitemid 129591346)
12. V Kreng T Lee 2004 Modular product design with grouping genetic algorithm-a case study Comput Ind Eng 46 443 460 10.1016/j.cie.2004.01.007
13. H Tseng C Chang J Li 2008 Modular design to support green life-cycle engineering Expert Syst Appl 34 2524 2537 10.1016/j.eswa.2007.04.018 (Pubitemid 351181387)
14. Y Umeda S Fkushige K Tonoike S Kondoh 2008 Product modularity for life cycle design CIRP Ann (Manuf Technol) 57 13 16 10.1016/j.cirp.2008.03.115
15. Ulrich K, Eppinger S (1991) Fundamentals of product modularity. In: Proceedings ASME winter annual meeting conference, vol 39, pp 73-80
16. A Kriwet E Zussman 1995 Systematic integration of design-for-recycling into product design Int J Prod Econ 38 15 22 10.1016/0925-5273(95)99062-A
17. K Lee 1994 Subassembly identification and evaluation for assembly planning IEEE Trans Syst Man Cybern 24 3 493 502 10.1109/21.278997
18. H Tseng T Chang Y Yang 2004 A connector-based approach to modular formulation problem for mechanical products Int J Adv Manuf Technol 24 161 171
19. Newcomb PJ, Bras B, Rosen DW (1996) Implications of modularity on product design for the life cycle. In: Proceedings of the 1996 ASME design engineering technical conferences and computers in engineering conference, vol 120, pp 483-490
20. Klir GJ, Yuan B (1995) Fuzzy sets and fuzzy logic: theory and applications. Prentice Hall PTR, Upper Saddle River
21. I Mazhar S Kara H Kaebernick 2007 Remaining life estimation of used components in consumer products: Life cycle data analysis by Weibull and artificial neural networks J Oper Manag 6 1184 1193 10.1016/j.jom.2007.01.021 (Pubitemid 47429827)
22. RN Langlois 2002 Modularity in technology and organization J Econ Behav Organ 49 19 37 10.1016/S0167-2681(02)00056-2
23. J Cui E Forssberg 2003 Mechanical recycling of waste electric and electronic equipment: a review J Hazard Mater 99 3 243 263 10.1016/S0304- 3894(03)00061-X (Pubitemid 36566664)
24. Suh NP (2001) Axiomatic design: advances and applications. Oxford University Press, Oxford
25. Pahl G, Beitz W (1988) Engineering design: a systematic approach. Springer, Berlin
26. Little A (1997) A reverse engineering toolbox for funcional product measurement. Master thesis, The University of Texas at Austin
27. Stone R (1997) Towards a theory of modular design. Phd thesis, The University of Texas at Austin
28. Harary H (1994) Graph theory. Perseus, Basel
29. Falkenaur E (1998) Genetic algorithms for grouping problem. Wiley, New York
30. J Reap F Roman S Duncan B Bras 2008 A survey of unresolved problems in life cycle assessment. Part 1: Goal and scope and inventory analysis Int J Life Cycle Assess 13 290 300 10.1007/s11367-008-0008-x
31. H Kaebemick M Sun S Kara 2003 Simplified lifecycle assessment for the early design stages of industrial CIRP Ann (Manuf Technol) 52 25 28 10.1016/S0007-8506(07)60522-8
32. K Seo H Park S Jang D Wallance 2002 Approximate estimation of the product life cycle cost using artificial neural networks in conceptual design Int J Adv Manuf Technol 19 461 471 10.1007/s001700200049 (Pubitemid 34573277)
33. T-C Kuo S-H Chang S Huang 2006 Environmentally conscious design by using fuzzy multi-attribute decision-making Int J Adv Manuf Technol 29 419 425 (Pubitemid 44000980)
34. T Greadel 1996 Weighted matrices as product life cycle assessment Int J Life Cycle Assess 1 86 89
35. Lee J, Kim I, Kwon E, Hur T (2003) Comparison of simplified LCA and matrix methods in identifying the environmental aspects of products. In: 2003 3rd international symposium on environmentally conscious design and inverse manufacturing-Ecodesign '03, pp 682-686
36. Zwolinski P, Kara S, Manmek S (2010) Comparison of eco-design tools for the conceptual design phase. In: 17th CIRP international conference on life cycle engineering, Hefei, China
37. T Hur J Lee J Ryu E Kwon 2005 Simplified LCA and matrix methods in identifying the environmental aspects of a product system J Environ Manag 75 229 237 10.1016/j.jenvman.2004.11.014 (Pubitemid 40485776)
38. E Hoshschorner G Finnveden 2003 Evaluation of two simplified life cycle assessment methods Int J LCA 8 119 128 10.1007/BF02978456 (Pubitemid 36686933)
39. C Cerdan C Gazulla M Raugei E Martinez P Fullana-I-Palmer 2009 Proposal for new quantitative eco-design indicators: a first case study J Clean Prod 17 1638 1643 10.1016/j.jclepro.2009.07.010