Data science and cyberinfrastructure: Critical enablers for accelerated development of hierarchical materials

International Materials Reviews

Volumn 60, Issue 3, 2015, Pages 150-168

  Kalidindi, Surya R ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Cyberinfrastructure; Data science; Materials informatics; Metamodels; Microstructure quantification; Process structure property linkages; Reduced order representations; Spatial correlations

Indexed keywords

DECISION SUPPORT SYSTEMS; ECOLOGY; ECOSYSTEMS;

CYBER INFRASTRUCTURES; DATA SCIENCE; MATERIALS INFORMATICS; META MODEL; PROCESS STRUCTURES; REDUCED ORDER; SPATIAL CORRELATIONS;

DATA REDUCTION;

EID: 84920445800     PISSN: 09506608     EISSN: 17432804     Source Type: Journal    
DOI: 10.1179/1743280414Y.0000000043     Document Type: Review

References (164)

1. D. T. Fullwood, S. R. Niezgodab, B. L. Adamsa and S. R. Kalidindi: 'Microstructure sensitive design for performance optimization', Prog. Mater. Sci., 2010, 55, (6), 477-562.
2. A. J. Schwartz, M. Kumar and B. L. Adams: 'Electron backscatter diffraction in materials science'; 2000, New York, Kluwer Academic/Plenum Publishers.
3. S. M. Qidwai, D. M. Turner, S. R. Niezgoda, A. C. Lewis, A. B. Geltmacher, D. J. Rowenhorst and S. R. Kalidindi: 'Estimating response of polycrystalline materials using sets of weighted statistical volume elements (WSVEs) ', Acta Mater., 2012, 60, 5284-5299.
4. D. J. Rowenhorst, A. C. Lewis and G. Spanos: 'Three-dimensional analysis of grain topology and interface curvature in a b-titanium alloy', Acta Mater., 2010, 58, (16), 5511-5519.
5. E. Baer, A. Hiltner and H. D. Keith: 'Hierarchical structure in polymeric materials', Science, 1987, 235, (4792), 1015-1022.
6. N. M. Hancox: 'Biology of bone'; 1972, Cambridge, Cambridge University Press.
7. J. D. Currey: 'The many adaptations of bone', J. Biomech., 2003, 36, (10), 1487-1495.
8. J. D. Currey: 'The mechanical adaptations of bones'; 1984, Princeton, Princeton University Press.
9. NSTC: 'Materials genome initiative for global competitiveness', National Science and Technology Council, 2011.
10. T. M. Pollock et al.: 'Integrated computational materials engineering: a transformational discipline for improved competitiveness and national security'; 2008, Washington, DC, The National Academies Press.
11. D. L. McDowell and T. L. Story: 'New Directions in Materials Design Science and Engineering (MDS&E)', Report of a NSF DMR-sponsored workshop, The Georgia Center for Advanced, Atlanta, October 19-21, 1998.
12. J. E. Spowart: 'Automated serial sectioning for 3-D analysis of microstructure', Scr. Mater., 2006, 5, 5-10.
13. J. E. Spowart, H. M. Mullens and B. T. Puchala: 'Collecting and analyzing microstructures in three dimensions: a fully automated approach', J. Miner. Met. Mater., 2003, 55, (10), 35-37.
14. M. P. Echlin, A. Mottura, C. J. Torbet and T. M. Pollock: 'A new TriBeam system for three-dimensional multimodal materials analysis', Rev. Sci. Instrum., 2012, 83, (2), 023701.
15. E. A. Wargo, A. C. Hannaa, A. Çeçena, S. R. Kalidindib and E. C. Kumbur: 'Selection of representative volume elements for pore-scale analysis of transport in fuel cell materials', J. Power Sources, 2012, 197, 168-179.
16. P. G. Kotula, G. S. Rohrer and M. P. Marsh: 'Focused ion beam and scanning electron microscopy for 3D materials characterization', MRS Bull., 2014, 39, (04), 361-365.
17. J. Villanova, C. Peter, S. Heikki, L. Jérôme, U.-V. François, L. Elisa, D. Gérard, B. Pierre, J. David, R. Denis, L. Aaron and M. Christophe: 'Multi-scale 3D imaging of absorbing porous materials for solid oxide fuel cells', J. Mater. Sci., 2014, 49, (16), 5626-5634.
18. M. Ebner, F. Geldmacher, F. Marone, M. Stampanoni and V. Wood: 'X-ray tomography of porous, transition metal oxide based lithium ion battery electrodes', Adv. Ener. Mater., 2013, 3, (7), 845-850.
19. O. Betz, U. Wegst, D. Weide, M. Heethoff, L. Helfen, W. K. Lee and P. Cloetens: 'Imaging applications of synchrotron x-ray micro-tomography in biological morphology and biomaterial science. I. General aspects of the technique and its advantages in the analysis of arthropod structures', J. Microsc., 2007, 227, (1), 51-71.
20. A. Stiénon, A. Fazekasa, J.-Y. Buffièrea, A. Vincenta, P. Daguierb and F. Merch: 'A new methodology based on X-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels', Mater. Sci. Eng. A, 2009, 513-514, 376-383.
21. H. Proudhon, J. Y. Buffière and S. Fouvry: 'Three-dimensional study of a fretting crack using synchrotron X-ray microtomography', Eng. Fract. Mech., 2007, 74, (5), 782-793.
22. J. F. Bingert et al.: 'High-energy diffraction microscopy characterization of spall damage', in 'Dynamic behavior of materials', (eds. B. Song, D. Casem, and J. Kimberley), Vol. 1, 397-403; 2014, Springer. New York.
23. L. Wang, M. Li, J. Almer and T. Bieler: 'Microstructural characterization of polycrystalline materials by synchrotron Xrays', Front. Mater. Sci., 2013, 7, (2), 156-169.
24. R. Pokharel, J. Lind, A. K. Kanjarala, R. A. Lebensohn, S. F. Li, P. Kenesei, R. M. Suter and A. D. Rollett: 'Polycrystal plasticity: comparison between grain-scale observations of deformation and simulations', Annu. Rev. Condens. Matter Phys., 2014, 5, (1), 317-346.
25. E. B. Gulsoy, A. J. Shahani, J. W. Gibbs, J. L. Fife and P. W. Voorhees: 'Four-dimensional morphological evolution of an aluminum silicon alloy using propagation-based phase contrast X-ray tomographic microscopy', Mater. Trans., 2014, 55, (1), 161-164.
26. B. Barwick, H. S. Park, O. H. Kwon, J. S. Baskin and A. H. Zewail: '4D imaging of transient structures and morphologies in ultrafast electron microscopy', Science, 2008, 322, (5905), 1227-1231.
27. M. K. Miller and R. G. Forbes: 'Atom probe tomography', Mater. Character., 2009, 60, (6), 461-469.
28. I. Arslan, E. A. Marquis, M. Homer, M. A. Hekmaty and N. C. Bartelt: 'Towards better 3-D reconstructions by combining electron tomography and atom-probe tomography', Ultramicroscopy, 2008, 108, (12), 1579-1585.
29. K. Kirane, S. Ghosh, M. Groeber and A. Bhattacharjee: 'Grain level dwell fatigue crack nucleation model for Ti alloys using crystal plasticity finite element analysis', J. Eng. Mater. Technol. Trans. ASME, 2009, 131, (2), 021003.
30. C. P. Przybyla and D. L. McDowell: 'Simulated microstructuresensitive extreme value probabilities for high cycle fatigue of duplex Ti-6Al-4V', Int. J. Plast., Special Issue in Honor or Nobutada Ohno. 2011, 27, (12), 1871-1895.
31. D. L. McDowell and F. P. E. Dunne: 'Microstructure-sensitive computational modeling of fatigue crack formation', Int. J. Fatigue, 2010, 32, (9), 1521-1542. [Special Issue on Emerging Frontiers in Fatigue].
32. B. L. Wang, Y. H. Wen, J. Simmons and Y. Wang: 'Systematic approach to microstructure design of Ni-base alloys using classical nucleation and growth relations coupled with phase field modeling', Metall. Mater. Trans. A., 2008, 39A, (5), 984-993.
33. Y. H. Wen, J. P. Simmons, C. Shen, C. Woodward and Y. Wang: 'Phase-field modeling of bimodal particle size distributions during continuous cooling', Acta Mater., 2003, 51, (4), 1123-1132.
34. S. Ghosh, Z. Nowak and K. Lee: 'Quantitative characterization and modeling of composite microstructures by Voronoi cells', Acta Mater., 1997, 45, (6), 2215-2234.
35. S. Ghosh, K. Lee and S. Moorthy: 'Multiple scale analysis of heterogeneous elastic structures using homogenization theory and voronoi cell finite element method', Int. J. Solids Struct., 1995, 32, (1), 27-62.
36. V. G. Kouznetsova, M. G. D. Geers and W. A. M. Brekelmans: 'Multi-scale second-order computational homogenization of multi-phase materials: a nested finite element solution strategy', Comput. Methods Appl. Mech. Eng., 2004, 193, (48-51), 5525-5550.
37. V. Kouznetsova, M. G. D. Geers and W. A. M. Brekelmans: 'Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme', Int. J. Numer. Methods Eng., 2002, 54, (8), 1235-1260.
38. H. Kadowaki and W. K. Liu: 'Bridging multi-scale method for localization problems', Comput. Methods Appl. Mech. Eng., 2004, 193, (30-32), 3267-3302.
39. D. L. McDowell, H.-J. Choi, J. H. Panchal, R. Austin, J. K. Allen and F. Mistree: 'Plasticity-related microstructure-property relations for materials design', Key Eng. Mater., 2007, 34, (0-341), 21-30.
40. H. J. Choi, D. L. Mcdowell, J. K. Allen and F. Mistree: 'An inductive design exploration method for hierarchical systems design under uncertainty', Eng. Optim, 2008, 40, (4), 287-307.
41. D. J. Luscher, D. L. McDowell and C. A. Bronkhorst: 'A second gradient theoretical framework for hierarchical multiscale modeling of materials', Int. J. Plast., 2010, 26, (8), 1248-1275.
42. G. B. Olson: 'Computational design of hierarchically structured materials', Science, 1997, 277, (29), 1237-1242.
43. S. R. Kalidindi, A. Bhattacharyya and R. D. Doherty: 'Detailed analyses of grain-scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models', Proc. R. Soc. Lond. A, 2004, 460, (2047), 1935-1956.
44. S. H. Choi, J. K. Kimb, B. J. Kima and Y. B. Parka: 'The effect of grain size distribution on the shape of flow stress curves of Mg-3Al-1Zn under uniaxial compression', Mater. Sci. Eng. A, 2008, 488, (1-2), 458-467.
45. E. El-Danaf, S. R. Kalidindi and R. D. Doherty: 'Influence of grain size and stacking-fault energy on deformation twinning in fcc metals', Metall. Mater. Trans. A, 1999, 30, (5), 1223-1233.
46. D. M. Dimiduk, P. M. Hazzledine, T. A. Parthasarathy, M. G. Mendiratta and S. Seshagiri: 'The role of grain size and selected microstructural parameters in strengthening fully lamellar TiAl alloys', Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 1998, 29, (1), 37-47.
47. D. J. Morrison and J. C. Moosbrugger: 'Effects of grain size on cyclic plasticity and fatigue crack initiation in nickel', Int. J. Fatigue, 1997, 20, S51-S59.
48. A. Lasalmonie and J. L. Strudel: 'Influence of grain size on the mechanical behaviour of some high strength materials', J. Mater. Sci., 1986, 21, (6), 1837-1852.
49. D. Hull: 'Effect of grain size and temperature on slip, twinning and fracture in 3% silicon iron', Acta Metall., 1961, 9, (3), 191-204.
50. D. L. McDowell, J. H. Panchal, H.-J. Choi, C. C. Seepersad, J. K. Allen and F. Mistree: 'Integrated design of multiscale, multifunctional materials and products'; 2009, Burlington, Elsevier.
51. D. L. McDowell: 'A perspective on trends in multiscale plasticity', Int. J. Plast., 2010, 26, (9), 1280-1309. [Special issue in honor of David L. McDowell].
52. G. B. Olson: 'Pathways of discovery designing a new material world', Science, 2000, 228, (12), 933-998.
53. B. L. Adams, S. R. Kalidindi and D. Fullwood: 'Microstructure sensitive design for performance optimization'; 2012, Waltham, Butterworth-Heinemann.
54. J. H. Panchal, S. R. Kalidindi and D. L. McDowell: 'Key computational modeling issues in integrated computational materials engineering', Comput. Aided Des., 2013, 45, (1), 4-25.
55. NSTC: A national strategic plan for advanced manufacturing, National Science and Technology Council, Executive Office of the President, February 2012.
56. Office of Science and Technology Policy: 'Obama administration unveils 'Big Data' initiative: announces $200 million in new R&D investments', Office of Science and Technology Policy, Washington, DC, 20502;2012.
57. J. Allison: 'Integrated computational materials engineering: A perspective on progress and future steps', J. Miner. Met. Mater. Soc., 2011, 63, (4), 15-18.
58. G. J. Schmitz and U. Prahl: 'ICMEg - the Integrated Computational Materials Engineering expert group - a new European coordination action', Integr. Mater. Manuf. Innovation, 2014, 3, (1), 2.
59. G. J. Schmitz and U. Prahl: 'Integrative computational materials engineering: concepts and applications of a modular simulation platform'; 2012, Chichester, John Wiley & Sons.
60. The European Materials Modelling Council: [cited 2014 Aug. 12], Available at: http://emmc.info/index.html
61. G. Linden, B. Smith and J. York: 'Amazon.com recommendations: item-to-item collaborative filtering', Internet Comput. IEEE, 2003, 7, (1), 76-80.
62. I. Li, A. Dey and J. Forlizzi: 'A stage-based model of personal informatics systems', Proc. SIGCHI Conf. on 'Human Factors in Computing Systems, 557-566; 2010, New York, NY, USA, ACM.
63. M. Hohman, K. Gregory, K. Chibale, P. J. Smith, S. Ekins and B. Bunin: 'Novel web-based tools combining chemistry informatics, biology and social networks for drug discovery', Drug Discov. Today, 2009, 14, (5), 261-270.
64. J. M. Tien: 'Toward a decision informatics paradigm: a real-time, information-based approach to decision making', IEEE Trans. Syst. Man Cybern. Part C Appl. Rev., 2003, 33, (1), 102-113.
65. T. T. Wan: 'Healthcare informatics research: from data to evidence-based management', J. Med. Syst., 2006, 30, (1), 3-7.
66. K. Rajan: 'Materials informatics', Mater. Today, 2005, 8, (10), 38-45.
67. S. R. Kalidindi, S. R. Niezgoda and A. A. Salem: 'Microstructure informatics using higher-order statistics and efficient data-mining protocols', JOM, 2011, 63, (4), 34-41.
68. D. Gorse and R. Lahana: 'Functional diversity of compound libraries', Curr. Opin. Chem. Biol., 2000, 4, (3), 287-294.
69. S. Curtarolo, D. Morgan, K. Persson, J. Rodgers and G. Ceder: 'Predicting crystal structures with data mining of quantum calculations', Phys. Rev. Lett., 2003, 91, (13), 135503.
70. G. Ceder: 'Predicting properties from scratch', Science, 1998, 280, (5366), 1099-1100.
71. C. M. Breneman, L. Catherine Brinson, L. S. Schadler, B. Natarajan, M. Krein, K. Wu, L. Morkowchuk, Y. Li, H. Deng and H. Xu: 'Stalking the materials genome: a data-driven approach to the virtual design of nanostructured polymers', Adv. Funct. Mater., 2013, 23, (46), 5746-5752.
72. M. Krein, B. Natarajan, L. S. Schadler, L. C. Brinson, H. Deng, D. Gai, Y. Li and C. M. Breneman: 'Development of materials informatics tools and infrastructure to enable high throughput materials design', MRS Online Proc Libr, 2012, 1425. mrsf11-1425-uu06-05, doi:10.1557/opl.2012.57.
73. D. Cebon and M. F. Ashby: 'Engineering materials informatics', MRS Bull., 2006, 31, (12), 1004-1012.
74. S. R. Kalidindi: 'Microstructure informatics', in 'Informatics for materials science and engineering: data-driven discovery for accelerated experimentation and application', (ed. K. Rajan, Butterworth-Heinemann), 2013, 443-466.
75. L. Peurrung, K. Ferris and T. Osman: 'The materials informatics workshop: Theory and application', JOM, 2007, 59, (3), 50-50.
76. Z.-K. Liu, L.-Q. Chen and K. Rajan: 'Linking length scales via materials informatics', JOM, 2006, 58, (11), 42-50.
77. ASTM International: 'E112-10: Standard test methods for determining average grain size'; 2010, West Conshohocken, PA, USA, ASTM International.
78. ASTM International: 'E1181-02: Standard test methods for characterizing duplex grain sizes'; 2008, West Conshohocken, PA, USA, ASTM International.
79. J. B. Shaffer, M. Knezevic and S. R. Kalidindi: 'Building texture evolution networks for deformation processing of polycrystalline fcc metals using spectral approaches: Applications to process design for targeted performance', Int. J. Plast., 2010, 26, (8), 1183-1194.
80. B. L. Adams, X. Gao and S. R. Kalidindi: 'Finite approximations to the second-order properties closure in single phase polycrystals', Acta Mater., 2005, 53, (13), 3563-3577.
81. D. T. Fullwood, S. R. Niezgoda and S. R. Kalidindi: 'Microstructure reconstructions from 2-point statistics using phase-recovery algorithms', Acta Mater., 2008, 56, (5), 942-948.
82. S. R. Niezgoda, D. T. Fullwood and S. R. Kalidindi: 'Delineation of the space of 2-point correlations in a composite material system', Acta Mater., 2008, 56, (18), 5285-5292.
83. S. R. Niezgoda and S. R. Kalidindi: 'Applications of the phasecoded generalized Hough transform to feature detection, analysis, and segmentation of digital microstructures', Comput. Mater. Continua, 2009, 14, (2), 79-97.
84. S. R. Niezgoda, D. M. Turner, D. T. Fullwood and S. R. Kalidindi: 'Optimized structure based representative volume element sets reflecting the ensemble-averaged 2-point statistics', Acta Mater., 2010, 58, (13), 4432-4445.
85. D. T. Fullwood, S. R. Kalidindi, S. R. Niezgoda, A. Fast and N. Hampson: 'Gradient-based microstructure reconstructions from distributions using fast Fourier transforms', Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2008, 494, (1-2), 68-72.
86. B. Bochenek and R. Pyrz: 'Reconstruction of random microstructures: a stochastic optimization problem', Comput. Mater. Sci, 2004, 31, (1-2), 93-111.
87. A. P. Roberts: 'Statistical reconstruction of three-dimensional porous media from two-dimensional images', Phys. Rev. E, 1997, 56, (3), 3203.
88. S. R. Niezgoda, A. K. Kanjarla and S. R. Kalidindi: 'Novel microstructure quantification framework for databasing, visualization, and analysis of microstructure data', Integr. Mater. Manuf. Innovation, 2013, 2, 3.
89. S. R. Kalidindi: 'Computationally-efficient fully-coupled multiscale modeling of materials phenomena using calibrated localization linkages', ISRN Mater. Sci., 2012, doi:10.5402/2012/305692.
90. T. Fast and S. R. Kalidindi: 'Formulation and calibration of higher-order elastic localization relationships using the MKS approach', Acta Mater., 2011, 59, 4595-4605.
91. T. Fast, S. R. Niezgoda and S. R. Kalidindi: 'A new framework for computationally efficient structure-structure evolution linkages to facilitate high-fidelity scale bridging in multi-scale materials models', Acta Mater., 2011, 59, (2), 699-707.
92. G. Landi, S. R. Niezgoda and S. R. Kalidindi: 'Multi-scale modeling of elastic response of three-dimensional voxel-based microstructure datasets using novel DFT-based knowledge systems', Acta Mater., 2010, 58, (7), 2716-2725.
93. S. Torquato: 'Random heterogeneous materials'; 2002, New York, Springer-Verlag.
94. W. F. Brown: 'Solid mixture permittivities', J. Chem. Phys., 1955, 23, (8), 1514-1517.
95. W. H. Press, S. A. Teukolsky, W. T. Vetterling and B. P. Flannery: 'Numerical Recipes: The art of scientific computing, 3rd edn, 2007, Cambridge University Press.
96. S. R. Niezgoda, Y. C. Yabansu and S. R. Kalidindi: 'Understanding and visualizing microstructure and microstructure variance as a stochastic process', Acta Mater., 2011, 59, 6387-6400.
97. C. Przybyla, B. L. Adams and M. Miles: 'A method for determining property variance in polycrystalline materials', NUMIFORM; 2004, Ohio State University, Columbus, OH, AIP Conference Proceedings.
98. C. P. Przybyla, R. Prasannavenkatesan, N. Salajegheh and D. L. McDowell: 'Microstructure-sensitive modeling of high cycle fatigue', Int. J. Fatigue, 2010, 32, (3), 512-525. [Special issue on Fatigue of Materials: Competing Failure Modes and Variability in Fatigue Life].
99. C. P. Przybyla and D. L. McDowell: 'Microstructure-sensitive extreme value probabilities for high cycle fatigue of Ni-base superalloy IN100', International J. Plast., 2010, 26, (3), 372-394.
100. X. Gao, C. P. Przybyla and B. L. Adams: 'Methodology for recovering and analyzing two-point pair correlation functions in polycrystalline materials', Metall. Mater. Trans. A, 2006, 37, (8), 2379-2387.
101. E. Kroner: 'Statistical Modelling', in 'Modelling small deformations of polycrystals', (eds. J. Gittus and J. Zarka), 229-291; 1986, London, Elsevier Science Publishers.
102. Graeme W. Milton: The theory of composites (Cambridge Monographs on Applied and Computational Mathematics). Cambridge monographs on applied and computational mathematics, 6. Cambridge University Press, 1st edition, May 2002.
103. D. T. Fullwood, B. L. Adams and S. R. Kalidindi: 'A strong contrast homogenization formulation for multi-phase anisotropic materials', J. Mech. Phys. Solids, 2008, 56, (6), 2287-2297.
104. B. L. Adams, H. Garmestani and G. Saheli: 'Microstructure design of a two phase composite using two-point correlation functions', J. Comput. Aided Mater. Des., 2004, 11, 103-115.
105. G. Saheli, H. Garmestani and B. L. Adams: 'Microstructure design of a two phase composite using two-point correlation functions', J. Comput. Aided Mater. Des., 2004, 11, (2-3), 103-115.
106. H. Garmestani, S. Lina, B. L. Adams and S. Ahz: 'Statistical continuum theory for large plastic deformation of polycrystalline materials', J. Mech. Phys. Solids, 2001, 49, (3), 589-607.
107. B. L. Adams: 'Use of microstructural statistics in predicting polycrystalline material properties', Metall. Mater. Trans., 1999, 30A, 969.
108. B. L. Adams and T. Olson: 'The mesostructure-properties linkage in polycrystals', Prog. Mater. Sci., 1998, 43, (1), 1-87.
109. M. J. Beran, T. A. Mason, B. L. Adams and T. Olsen: 'Bounding elastic constants of an orthotropic polycrystal using measurements of the microstructure', J. Mech. Phys. Solids, 1996, 44, (9), 1543-1563.
110. N. Halko, P.-G. Martinsson, Y. Shkolnisky and M. Tygert: 'An algorithm for the principal component analysis of large data sets', SIAM J. Sci. Comput., 2011, 33, (5), 2580-2594.
111. V. Rokhlin, A. Szlam and M. Tygert: 'A randomized algorithm for principal component analysis', SIAM J. Matrix Anal. Appl., 2009, 31, (3), 1100-1124.
112. I. T. Jolliffe: 'Principal component analysis: a beginner's guide - I. Introduction and application. ', Weather, 1990, 45, (10), 375-382.
113. C. Suh, A. Rajagopalan, X. Li and K. Rajan: 'The application of principal component analysis to materials science data', Data Sci. J., 2002, 1, 19-26.
114. A. Ce Cen, T. Fast, E. C. Kumbur and S. R. Kalidindi: 'A datadriven approach to establishing microstructure-property relationships in porous transport layers of polymer electrolyte fuel cells', J. Power Sources, 2014, 245, 144-153.
115. X. Dong, D. L. McDowell, S. R. Kalidindi and K. I. Jacob: 'Dependence of mechanical properties on crystal orientation of semi-crystalline polyethylene structures', Polymer, 2014, 55, (16), 4248-4257.
116. B. L. Adams, S. I. Wright and K. Kunze: 'Orientation imaging: the emergence of a new microscopy', Metall. Trans. A, 1993, 24A, (4), 819-831.
117. S. Pathak, J. Michler, K. Wasmer and S. R. Kalidindi: 'Studying grain boundary regions in polycrystalline materials using spherical nano-indentation and orientation imaging microscopy', J. Mater. Sci., 2012, 47, 815-823.
118. S. Pathak, D. Stojakovic and S. R. Kalidindi: 'Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopy', Acta Mater., 2009, 57, (10), 3020-3028.
119. S. R. Kalidindi and S. J. Vachhani: 'Mechanical characterization of grain boundaries using nanoindentation', Curr. Opin. Solid State Mater. Sci., 2014, 8, 196-204.
120. T. A. Mason and B. L. Adams: 'Use of microstructural statistics in predicting polycrystalline material properties', Metall. Mater. Trans. A, 1999, 30, (4), 969-979.
121. M. D. Uchic, M. A. Groeber and A. D. Rollett: 'Automated serial sectioning methods for rapid collection of 3-D microstructure data', JOM, 2011, 63, (3), 25-29.
122. W. Xu, M. Ferry, N. Mateescu, J. M. Cairney and F. J. Humphreys: 'Techniques for generating 3-D EBSD microstructures by FIB tomography', Mater. Charact., 2007, 58, (10), 961-967.
123. S. Van Boxel, S. Schmidt, W. Ludwig, Y. B. Zhang, D. J. Jensen and W. Pantleon: 'Direct observation of grain boundary migration during recrystallization within the bulk of a moderately deformed aluminium single crystal', Mater. Trans., 2014, 55, (01), 128-136.
124. B. L. Adams and D. P. Field: 'Measurement and representation of grain-boundary texture', Metall. Trans. A, 1992, 23A, (9 pt 2), 2501-2513.
125. B. L. Adams: 'Orientation imaging microscopy: application to the measurement of grain boundary structure', Mater. Sci. Eng. A, 1993, 166, (1-2), 59-66.
126. A. A. Gusev: 'Representative volume element size for elastic composites: a numerical study', J. Mech. Phys. Solids, 1997, 45, (9), 1449-1459.
127. S. Nemat-Nasser and M. Hori: 'Micromechanics: overall properties of heterogeneous materials', 2nd edn; 1999, Amsterdam, Elsevier.
128. U. Hornung: 'Homogenization and porous media, Interdisciplinary Applied Mathematics Series', Vol. 6; 1997, Berlin, Springer.
129. A. Cherkaev: Variational methods for structural optimization, Applied Mathematical Sciences', Vol. 140; 1991, New York, Springer.
130. X. L. Chen and Y. J. Liu: 'Square representative volume elements for evaluating the effective material properties of carbon nanotube-based composites', Comput. Mater. Sci., 2004, 29, (1), 1-11.
131. W. J. Drugan and J. R. Willis: 'A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites', J. Mech. Phys. Solids, 1996, 44, (4), 497-524.
132. T. Kanit, T. Kanit, S. Forest, I. Galliet, V. Mounoury and D. Jeulin: 'Determination of the size of the representative volume element for random composites: statistical and numerical approach', Int. J. Solids Struct., 2003, 40, (13-14), 3647-3679.
133. Z. Shan and A. M. Gokhale: 'Representative volume element for non-uniform micro-structure', Comput. Mater. Sci., 2002, 24, (3), 361-379.
134. K. Sab: 'On the homogenization and the simulation of random materials', Eur. J. Mech. A. Solids, 1992, 11, (5), 505-515.
135. M. Ostoja-Starzewski: 'Microstructural randomness and scaling in mechanics of materials'; 2008, Boca Raton, Chapman & Hall/CRC.
136. E. Kröner: 'Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls', Zeitschrift für Physik A Hadrons Nuclei, 1958, 151, (4), 504-518.
137. J. R. Willis: 'Variational and related methods for the overall properties of composite materials', Adv. Appl. Mech., 1981, 21, 2-78.
138. J. J. McCoy: 'Macroscopic response of continua with random microstructures', in 'Mechanics today', (ed. S. Nemat-Nasser), Vol. 6, 1-40; 1981, Oxford, Pergamon Press.
139. R. Hill: 'Elastic properties of reinforced solids: some theoretical principles', J. Mech. Phys. Solids, 1963, 11, 357-372.
140. D. Jeulin and M. Ostoja-Starzewski: 'Mechanics of random and multiscale microstructures'; 2001, Wien, New York, Springer.
141. D. L. McDowell, S. Ghosh and S. R. Kalidindi: 'Representation and computational structure-property relations of random media', JOM, 2011, 63, (3), 45-51.
142. N. J. Petch: 'Cleavage strength of polycrystals', J. Iron Steel Inst., 1953, 174, (Part 1), 25-28.
143. E. O. Hall: 'The deformation and ageing of mild steel III. Discussion of results', Proc. Phys. Soc. Sect. B, 1951, 64, 747-753.
144. A. Gupta, et al: Structure-property linkages for non-metallic inclusions/steel composite system using a data science approach. Acta Mater., 2014, in preparation.
145. H. F. Al-Harbi and S. R. Kalidindi: Crystal plasticity finite element simulations using a database of discrete Fourier transforms. Int. J. Plast., 2014, doi: 10.1016/j.ijplas.2014.04.006.
146. M. Knezevic, H. F. Al-Harbi and S. R. Kalidindi: 'Crystal plasticity simulations using discrete Fourier transforms', Acta Mater., 2009, 57, (6), 1777-1784.
147. M. Knezevic, S. R. Kalidindi and D. Fullwood: 'Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals', Int. J. Plast., 2008, 24, (7), 1264-1276.
148. S. R. Kalidindi, H. K. Duvvuru and M. Knezevic: 'Spectral calibration of crystal plasticity models', Acta Mater., 2006, 54, (7), 1795-1804.
149. H. F. Al-Harbi, M. Knezevic and S. R. Kalidindi: 'Spectral approaches for the fast computation of yield surfaces and firstorder plastic property closures for polycrystalline materials with cubic-triclinic textures', Comput. Mater. Continua, 2010, 15, (2), 153-172.
150. F. Feyel: 'A multilevel finite element method (FE2) to describe the response of highly non-linear structures using generalized continua', Comput. Methods Appl. Mech. Eng., 2003, 192, (28), 3233-3244.
151. H. F. Al-Harbi, G. Landi and S. R. Kalidindi: 'Multi-scale modeling of the elastic response of a structural component made from a composite material using the materials knowledge system', Modell. Simul. Mater. Sci. Eng., 2012, 20, (5), 055001.
152. G. Landi and S. R. Kalidindi: 'Thermo-elastic localization relationships for multi-phase composites', Comput. Mater. Continua, 2010, 16, (3), 273-293.
153. S. R. Kalidindi, S. R. Niezgoda, G. Landi, S. Vachhani and T. Fast: 'A novel framework for building materials knowledge systems', Comput. Mater. Continua, 2010, 17, (2), 103-125.
154. G. Landi, S. R. Niezgoda and S. R. Kalidindi: 'Multi-scale modeling of elastic response of three-dimensional voxel-based microstructure datasets using novel DFT-based knowledge systems', Acta Mater., 2009, 58, (7), 2716-2725.
155. Y. C. Yabansu, D. K. Patel, and S. R. Kalidindi: 'Calibrated localization relationships for elastic response of polycrystalline aggregates', Acta Mater., 2014, 81, 151-160.
156. E. Kroner: 'Bounds for effective elastic moduli of disordered materials', J. Mech. Phys. Solids, 1977, 25, (2), 137-155.
157. M. Binci, D. Fullwood and S. R. Kalidindi: 'A new spectral framework for establishing localization relationships for elastic behavior of composites and their calibration to finite-element models', Acta Mater., 2008, 56, (10), 2272-2282.
158. S. R. Kalidindi, M. Binci, D. Fullwood and B. L. Adams: 'Elastic properties closures using second-order homogenization theories: Case studies in composites of two isotropic constituents', Acta Mater., 2006, 54, (11), 3117-3126.
159. A. V. Oppenheim, R. W. Schafer and J. R. Buck: 'Discrete time signal processing'; 1999, Englewood Cliffs, NJ, Prentice Hall.
160. B. S. Anglin, R. A. Lebensohn and A. D. Rollett: 'Validation of a numerical method based on Fast Fourier Transforms for heterogeneous thermoelastic materials by comparison with analytical solutions', Comput. Mater. Sci., 2014, 87, (0), 209-217.
161. R. A. Lebensohn, A. K. Kanjarla and P. Eisenlohr: 'An elastoviscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials', Int. J. Plast., 2012, 32-33, 59-69.
162. H. Moulinec and P. Suquet: 'A numerical method for computing the overall response of nonlinear composites with complex microstructure', Comput. Methods Appl. Mech. Eng., 1998, 157, (1-2), 69-94.
163. H.-J. Bunge: 'Texture analysis in materials science. Mathematical Methods'; 1993, Gö ttingen, Cuvillier Verlag.
164. H. J. Choi, J. K. Allen, D. Rosen, D. L. McDowell and F. Mistree: 'An inductive design exploration method for robust multiscale materials design', J. Mech. Des., 2008, 130, (3), 031402.