Grain level dwell fatigue crack nucleation model for Ti alloys using crystal plasticity finite element analysis

Journal of Engineering Materials and Technology

Volumn 131, Issue 2, 2009, Pages 0210031-02100314

  Kirane, Kedar ^a   Ghosh, Somnath ^a   Groeber, Mike ^a   Bhattacharjee, Amit ^a,b  

^a Ohio State University   (United States)

^b OHIO STATE UNIVERSITY   (United States)

Author keywords

Crack initiation; Crystal plasticity; Dwell fatigue; Sensitivity studies; Ti 6242

Indexed keywords

CRACK INITIATION; CRACK TIPS; CRYSTALS; ELASTICITY; FATIGUE CRACK PROPAGATION; FINITE ELEMENT METHOD; MICROSTRUCTURE; MORPHOLOGY; POLYCRYSTALLINE MATERIALS; STRUCTURAL DESIGN; TITANIUM ALLOYS;

CRYSTAL PLASTICITY; CRYSTAL PLASTICITY FINITE ELEMENT; CRYSTALLOGRAPHIC ORIENTATIONS; DWELL FATIGUE; FINITE ELEMENT METHOD MODELS; ORIENTATION IMAGING MICROSCOPY; SENSITIVITY STUDIES; TI-6242;

FATIGUE OF MATERIALS;

EID: 77955257595     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.3078309     Document Type: Article

References (35)

1. Sinha, V., Mills, M. J., and Williams, J. C., 2004, "Understanding the Contributions of Normal Fatigue and Static Loading to the Dwell Fatigue in a Near-Alpha Titanium Alloy", Metall. Trans. A., 35, pp. 3141-3148.
2. Inman, M. A., and Gilmore, C. M., 1979, "Room Temperature Creep of Ti-6Al-4V", Metall. Trans. A., 10 A., pp. 419-425.
3. Hasija, V., Ghosh, S., Mills, M. J., and Joseph, D. S., 2003, "Modeling Deformation and Creep in Ti-6Al Alloys With Experimental Validation", Acta Mater., 51, pp. 4533-4549.
4. Bache, M. R., 2003, "A Review of Dwell Sensitive Fatigue in Titanium Alloys: The Role of Microstructure, Texture and Operating Conditions", Int. J. Fatigue, 25, pp. 1079-1087.
5. Woodfield, A. P., Gorman, M. D., Corderman, R. R., Sutliff, J. A., and Yamron, B., 1995, "Effect of Microstructure on Dwell Fatigue Behaviour of Ti-6242", Titanium '95 Science and Technology, The Minerals, Metals and Materials Society, Warrendale, PA, pp. 1116-1124.
6. Rokhlin, S., Kim, J. Y., and Zoofan, B., 2005, unpublished.
7. Deka, D., Joseph, D. S., Ghosh, S., and Mills, M. J., 2006, "Crystal Plasticity Modeling of Deformation and Creep in Polycrystalline Ti-6242", Metall. Mater. Trans. A., 37, pp. 1371-1388.
8. Venkataramani, G., Deka, D., and Ghosh, S., 2006, "Crystal Plasticity Based FE Model for Understanding Microstructural Effects on Creep and Dwell Fatigue in Ti-6242", ASME J. Eng. Mater. Technol., 128, pp. 356-365.
9. Venkatramani, G., Ghosh, S., and Mills, M. J., 2007, "A Size Dependent Crystal Plasticity Finite Element Model for Creep and Load-Shedding in Polycrystalline Titanium Alloys", Acta Mater., 55, pp. 3971-3986.
10. Ghosh, S., Bhandari, Y., and Groeber, M., 2008, "CAD Based Reconstruction of Three Dimensional Polycrystalline Microstructures From FIB Generated Serial Sections", Comput.-Aided Des., 40 (3), pp. 293-310.
11. Groeber, M., Ghosh, S., Uchic, M. D., and Dimiduk, D. M., 2008, "A Framework for Automated Analysis and Representation of 3D Polycrystalline Microstructures, Part 2: Synthetic Structure Generation", Acta Mater., 56 (6), pp. 1274-1287.
12. Groeber, M. A., 2007, "Development of an Automated Characterization-Representation Framework for the Modeling of Polycrystalline Materials in 3D", Ph. D. thesis, Ohio State University, Columbus, OH.
13. Stroh, A. N., 1954, "The Formation of Cracks as a Result of Plastic Flow", Proc. R. Soc. London, Ser. A., 223, pp. 404-414.
14. Gao, Q., and Liu, H. W., 1990, "Characterization of the Tip Field of a Discrete Dislocation Pileup for the Development of Physically Based Micromechanics", Metall. Trans. A., 21, pp. 2087-2089. (Pubitemid 23575034)
15. Hall J., 2006, "Cold Dwell Fatigue Debit in Ti-6242: Honeywell Approach", Honeywell ES&S, unpublished.
16. Manchiraju, S., Asai, M., and Ghosh, S., 2007, "A Dual-Time-Scale Finite Element Model for Simulating Cyclic Deformation of Polycrystalline Alloys", J. Strain Anal. Eng. Des., 42, pp. 183-200.
17. Sinha, V., Mills, M. J., and Williams, J. C., 2006, "Crystallography of Fracture Facets in a Near Alpha Titanium Alloy", Metall. Mater. Trans. A., 37, pp. 2015-2026.
18. Sinha, V., Spowart, J. E., Mills, M. J., and Williams, J. C., 2006, "Observations on the Faceted Initiation Site in the Dwell-Fatigue Tested Ti-6242 Alloy: Crystallographic Orientation and Size Effects", Metall. Mater. Trans. A., 37, pp. 1507-1518.
19. Williams, J. C., Ghosh, S., Mills, M. J., and Rokhlin, S., 2006, "The Evaluation of Cold Dwell Fatigue in Ti-6242", FAA Report Summary
20. Venkataramani, G., Kirane, K., and Ghosh, S., 2008, "Microstructural Parameters Affecting Creep Induced Load Shedding in Ti-6242 by a Size Dependent Crystal Plasticity FE Model", Int. J. Plast, 24, pp. 428-454.
21. Suresh, S., 1991, Fatigue of Materials, Cambridge University Press, Cambridge, UK.
22. Baker, I., 1999, "Improving the Ductility of Intermetallic Compounds by Particle-Induced Slip Homogenization", Scr. Mater., 41 (4), pp. 409-414.
23. Smith, E., 1979, "Dislocations and Cracks", Dislocations in Solids, F R. N. Nabarro, ed., North Holland, Amsterdam, The Netherlands.
24. Tanaka, K., and Mura, T., 1981, "A Dislocation Model for Fatigue Crack Initiation", ASME J. Appl. Mech., 48, pp. 97-103. (Pubitemid 11497152)
25. Griffith A. A., 1920, "The Phenomena of Rupture and Flow in Solids", Philos. Trans. R. Soc. London, Ser. A., 221, pp. 163-198.
26. Ruiz, G., Pandolfi, A., and Ortiz, M., 2001, "Three-Dimensional Cohesive Modeling of Dynamic Mixed Mode Fracture", Int. J. Numer. Methods Eng., 52, pp. 97-120.
27. Camacho, G. T., and Ortiz, M., 1996, "Computational Modeling of Impact Damage in Brittle Materials", Int. J. Solids Struct., 33 (20-22), pp. 2899-2938.
28. Parvatareddy, H., and Dillard, D. A., 1999, "Effect of Mode-Mixity on the Fracture Toughness of Ti-6Al-4V/FM-5 Adhesive Joints", Int. J. Fract, 96, pp. 215-228.
29. Lardner, R. W., 1974, Mathematical Theory of Dislocations and Fracture, University of Toronto Press, Toronto, Canada.
30. Huang, Y., Qu, S., Hwang, K. C., Li, M., and Gao, H., 2004, "A Conventional Theory of Mechanism-Based Strain Gradient Plasticity", Int. J. Plast., 20, pp. 753-782.
31. Fleck, N. A., and Hutchinson, J. W., 1993, "A Phenomenological Theory for Strain Gradient Effects in Plasticity", J. Mech. Phys. Solids, 41 (12), pp. 1825-1857.
32. Gao, H., Huang, Y., Nix, W. D., and Hutchinson, J. W., 1999, "Mechanism-Based Strain Gradient Plasticity-I: Theory", J. Mech. Phys. Solids, 47 (6), pp. 1239-1263.
33. Neeraj, T., Hou, D. H., Daehn, G. S., and Mills, M. J., 2000, "Phenomenological and Microstructural Analysis of Room Temperature Creep in Titanium Alloys", Acta Mater., 48, pp. 1225-1238.
34. Engelen, R. A. B., Geers, M. G. D., and Baaijens, F P. T., 2003, "Nonlocal Implicit Gradient-Enhanced Elasto-Plasticity for the Modeling of Softening Behavior", Int. J. Plast., 19, pp. 403-433.
35. Odegard, B. C., and Thompson, A. W., 1974, "Low Temperature Creep of Ti-6Al-4V", Metall. Trans., 5, pp. 1207-1213.